Develop Bugs

Light Flow

Has anyone used light flow for notification led customization? I've tried it and its pretty nice. What's been your experience?
Sent from my SPH-L710 using XDA

RachellehcaR said:
Has anyone used light flow for notification led customization? I've tried it and its pretty nice. What's been your experience?
Sent from my SPH-L710 using XDA
Click to expand...
Click to collapse
I used it on my nexus an tried it on the sgs3 it was nice but had a few issues with a led staying on

I had this issue also and I wasn't really sure what the problem was. The discription said the S3 is supported.
Sent from my SPH-L710 using XDA

RachellehcaR said:
I had this issue also and I wasn't really sure what the problem was. The discription said the S3 is supported.
Sent from my SPH-L710 using XDA
Click to expand...
Click to collapse
Im going with a bug

At the moment the leds hex codes sent through to the US versions of the S3 are all messed up. This is common across all apps that try to control the led color and is certainly a bug in the samsung builds for the US editions (it works on the euro ones)
I'm looking into rooted users being able to control the colors better by bypassing android and using unix to send commands to the device. We've got red, green and blue working but not any color mixing yet.

thanks so much andrew! Look forward to using this when you are finished!

andrewpmoore said:
At the moment the leds hex codes sent through to the US versions of the S3 are all messed up. This is common across all apps that try to control the led color and is certainly a bug in the samsung builds for the US editions (it works on the euro ones)
I'm looking into rooted users being able to control the colors better by bypassing android and using unix to send commands to the device. We've got red, green and blue working but not any color mixing yet.
Click to expand...
Click to collapse
Nice to see there are people who care about fixing there apps ;-)

andrewpmoore said:
At the moment the leds hex codes sent through to the US versions of the S3 are all messed up. This is common across all apps that try to control the led color and is certainly a bug in the samsung builds for the US editions (it works on the euro ones)
I'm looking into rooted users being able to control the colors better by bypassing android and using unix to send commands to the device. We've got red, green and blue working but not any color mixing yet.
Click to expand...
Click to collapse
sweet can't wait till this app works...
how's the the bug where the green stays on when the phone is just sleeping with no new notifications?
hope the fix comes out soon

There's still a bit to do, but getting out the colors,flash speeds etc are working .it's just trying to fight against the standard notifications that I'm working on.

Awesome.. I still have it installed & can't wait to get it back up and running again
andrewpmoore said:
There's still a bit to do, but getting out the colors,flash speeds etc are working .it's just trying to fight against the standard notifications that I'm working on.
Click to expand...
Click to collapse

andrewpmoore said:
At the moment the leds hex codes sent through to the US versions of the S3 are all messed up. This is common across all apps that try to control the led color and is certainly a bug in the samsung builds for the US editions (it works on the euro ones)
I'm looking into rooted users being able to control the colors better by bypassing android and using unix to send commands to the device. We've got red, green and blue working but not any color mixing yet.
Click to expand...
Click to collapse
So we would need root with an updated version to work?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

If we're rooted already and using the app, what do we need to do to get it to work without the constant green LED? Or are you saying you have a modified version of the app that works with rooted US SGSIII's? Can you post that for testing purposes? I'm good with three color for not as long as the green light does not stay lit!

Im getting close to a having a beta ready.
Root will be required until samdung sort out their issues with the led.

andrewpmoore said:
Im getting close to a having a beta ready.
Root will be required until samdung sort out their issues with the led.
Click to expand...
Click to collapse
W00T!! Cant wait to try it out, if I end up using it a lot(which i prolly will) I'll be sure to donate / buy the full version

I am hopping the updated version will also have a fix for the issue when it triggers an speach alert whenever you open a folder on the TWlauncher ("A folder is opened", "a folder is closed", whatever the English version says).
Then I will buy the full app.

julien.me said:
I am hopping the updated version will also have a fix for the issue when it triggers an speach alert whenever you open a folder on the TWlauncher ("A folder is opened", "a folder is closed", whatever the English version says).
Then I will buy the full app.
Click to expand...
Click to collapse
Should just be able to turn off "talk back" in the accessability settings
Dev for Light Flow has been in contact with Samsung Dev's to have them trace back the issue

nonmindo said:
Should just be able to turn off "talk back" in the accessability settings
Dev for Light Flow has been in contact with Samsung Dev's to have them trace back the issue
Click to expand...
Click to collapse
Thanks for the info, that fixes it but it also turns off Google Maps Navigation talkback ... and the talkback service is turned off, I actually had to mute ALL sound in the accessibility setting.
it is better than before though but waiting for a permanent fix

I can't use the troubleshoot because it cuts off the speaker for calls...
Sent from my GT-I9300 using xda premium

Cant wait to get a working version for my ATT S3 ! I already bought the app thinking it would work only to get that green LED

Led disco works to at least show you what all colors we have
Sent from my SPH-L710 using xda app-developers app

LED control app?

Looking for the best led control app available. Having the notification led back was one of the biggest wins on this phone for me (having come from a skyrocket 2 days ago). not having a notification led has been bugging me since I came from blackberry. I had an app on my bold that could make calls, texts, and emails different colors, combinations or patterns. Would like this app to make the led flash while ringing too, not just a missed call.
Sent from my SAMSUNG-SGH-I747 using xda premium

-Kevlar- said:
Looking for the best led control app available. Having the notification led back was one of the biggest wins on this phone for me (having come from a skyrocket 2 days ago). not having a notification led has been bugging me since I came from blackberry. I had an app on my bold that could make calls, texts, and emails different colors, combinations or patterns. Would like this app to make the led flash while ringing too, not just a missed call.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Light flow is currently as good as you will find.
Sent from my SGH-I747 using Tapatalk 2

Notification Led
Another option that you got is to flash an CM10 or or PA Hybrid ROM, it has a built-in seetting for Led Control, it works flawlessly.
Cheers!

theres also light manager. I believe the dev built it specifically for the GS3.
https://play.google.com/store/apps/details?id=com.koo.lightmanager&feature=nav_result#?t=W251bGwsMSwxLDMsImNvbS5rb28ubGlnaHRtYW5hZ2VyIl0.

tonysunshine said:
theres also light manager. I believe the dev built it specifically for the GS3.
https://play.google.com/store/apps/details?id=com.koo.lightmanager&feature=nav_result#?t=W251bGwsMSwxLDMsImNvbS5rb28ubGlnaHRtYW5hZ2VyIl0.
Click to expand...
Click to collapse
Tried that one, and it was derped on US S3. I tested the miss call, and it did show the color, however, the light would not go away afterwards(even after clearing the call, disabling the app, and even uninstalling the app)
Lightflow so far has worked pretty well(the one for rooted phones)

I am using light flow. I did not need the pro features but the dev deserves money for the supprt he provides
Sent from my SAMSUNG-SGH-I747 using xda premium

Light Flow is def a great app. Provides plenty of customization and if needed the pro version provides LED notifications for many different apps from the Play store.

None of these can have the led on when screen is on or incoming call.
Sent from my SAMSUNG-SGH-I747 using xda premium

Original thread discussing Light Flow here:
http://forum.xda-developers.com/showthread.php?t=1728788
Blog by the author discussing the SIII here:
http://www.folioflow.com/ff/page/website/lightflow/pageId/1826
nest75068 said:
Lightflow so far has worked pretty well(the one for rooted phones)
Click to expand...
Click to collapse
Where did you get the rooted version of LightFlow? Just download the market version and it will ask for root? I don't see any of those details on the blog by the author.... just see where he said he's been messing with the root version, not posting it for download, do you have a link to it somewhere?
Unless you mean the Lite version, where he states this:
....the S3 USA versions have some issues unless your phone is "rooted" (See our website for more details)....
Click to expand...
Click to collapse
Definitely looking for the full version for my rooted SIII if you know anything about that! Will pay for it, just to be clear, but need the full version, not just the lite one....

Full version of light flow has the ability to be used in rooted mode. Works well here. No issues.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

CM have LED control

Stager.27 said:
CM have LED control
Click to expand...
Click to collapse
So does AOKP.
Sent from my SGH-I747 using xda premium

the latest lightflow version is causing wake locks and preventing the phone from going into deep sleep
the LED controls in the ROMs is nice but kinda sucks as it doesnt cycle thru the lights... meaning if i have a missed call (red), voice mail (purple) and a SMS (blue) only my red light will only flash... will not cycle thru meaning with lightflow, it would flash red, then purple, then blue... the built in one in the ROMs will only show red...
just an fyi

search for light manager great led control and no wakelocks.

Time Warp Camera

I just saw a video of Blackberry 10 - not to say that I would ever go back to Blackberry, but there is a very nice camera feature that they made public called Time Warp (http://www.youtube.com/watch?v=hF2cLwPHaNY)
Does anyone know if Android has an app that can also do what is shown in the video?
Basically, the camera app allows you to change someone's face that blinked to seconds later where they weren't blinking. It probably is similar to the burst show using Samsung's camera app, but instead of choosing an entirely new picture, you only change the person's face. This would make sense if there are two people in the picture and one picture one person has their eyes open and the other close and vise versa.
Thanks in advance.
EDIT: sorry, I meant to post this in the Q/A forum. If a mod reads this, please move it if possible or just delete it.

arabcamel said:
I just saw a video of Blackberry 10 - not to say that I would ever go back to Blackberry, but there is a very nice camera feature that they made public called Time Warp (http://www.youtube.com/watch?v=hF2cLwPHaNY)
Does anyone know if Android has an app that can also do what is shown in the video?
Basically, the camera app allows you to change someone's face that blinked to seconds later where they weren't blinking. It probably is similar to the burst show using Samsung's camera app, but instead of choosing an entirely new picture, you only change the person's face. This would make sense if there are two people in the picture and one picture one person has their eyes open and the other close and vise versa.
Thanks in advance.
EDIT: sorry, I meant to post this in the Q/A forum. If a mod reads this, please move it if possible or just delete it.
Click to expand...
Click to collapse
that might be the ONLY cool thing RIM has done in the past 8 million years. What's a RIM Job?

That's remarkable.
Subscribed.

You know there is a similar-ish feature in the galaxy S3 ? It's called smile shot, and as much as the interface is not as fancy as RIM's one, it does basically the same thing!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

timeToy said:
You know there is a similar-ish feature in the galaxy S3 ? It's called smile shot, and as much as the interface is not as fancy as RIM's one, it does basically the same thing!
Click to expand...
Click to collapse
Just wondering if the RIM camera would allow one to adjust the expressions of all the people in the photo independently. For instance can one also chose a different moment for the guy in the photo ? That would be really cool, however I think it might not be the case as one would then have to interpolate the background.
Edit : I mean the photo they show in the youtube video

elfie said:
Just wondering if the RIM camera would allow one to adjust the expressions of all the people in the photo independently. For instance can one also chose a different moment for the guy in the photo ? That would be really cool, however I think it might not be the case as one would then have to interpolate the background.
Edit : I mean the photo they show in the youtube video
Click to expand...
Click to collapse
I watched another youtube video of RIM's camera app and yes, you can do that. Basically manipulate each persons facial expression independently to simulate something happened that really didn't.

timeToy said:
You know there is a similar-ish feature in the galaxy S3 ? It's called smile shot, and as much as the interface is not as fancy as RIM's one, it does basically the same thing!
Click to expand...
Click to collapse
That's a nice feature, but that only takes one person to smile. RIM's feature allows you to pick the best facial expression from multiple people individually in a picture.

In the newest note II Video they introduced this same feature in the new camera app. Extract the app from drewgaren's ROM which has the note II's camera apk?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Search for scaladoinc on YouTube. I guess RIM team up with them.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

I just used the BB10 the other day. The camera is pretty jacked up right now and the phone is laggy in general

Ghstudent said:
In the newest note II Video they introduced this same feature in the new camera app. Extract the app from drewgaren's ROM which has the note II's camera apk?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
you are absolutely right!!!! I flashed this ROM yesterday and checked your reply this morning. what are the chances.
This is awesome!

There is actually a direct link to the camera and gallery without downloading the entire ROM
Check it

Ghstudent said:
In the newest note II Video they introduced this same feature in the new camera app. Extract the app from drewgaren's ROM which has the note II's camera apk?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Can you give a link to the video? Also, what is the feature called on the galaxy note 2 app... I can't find it
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

frewys said:
There is actually a direct link to the camera and gallery without downloading the entire ROM
Check it
Click to expand...
Click to collapse
Which topic did that come from?

I believe it's the same as in his ROM. The best group photo feature doesn't work... Is it working for anyone else?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

How can i use this on a MIUI rom? Thanks!

Wond3r said:
I just used the BB10 the other day. The camera is pretty jacked up right now and the phone is laggy in general
Click to expand...
Click to collapse
Yah, you used the unreleased BB10 the other day, good on you. What, the alpha version? I personally think BB10 is going to rock.

arabcamel said:
I just saw a video of Blackberry 10 - not to say that I would ever go back to Blackberry, but there is a very nice camera feature that they made public called Time Warp (http://www.youtube.com/watch?v=hF2cLwPHaNY)
Does anyone know if Android has an app that can also do what is shown in the video?
Basically, the camera app allows you to change someone's face that blinked to seconds later where they weren't blinking. It probably is similar to the burst show using Samsung's camera app, but instead of choosing an entirely new picture, you only change the person's face. This would make sense if there are two people in the picture and one picture one person has their eyes open and the other close and vise versa.
Thanks in advance.
EDIT: sorry, I meant to post this in the Q/A forum. If a mod reads this, please move it if possible or just delete it.
Click to expand...
Click to collapse
iOS has an app called GroupShot that does just that. You can take a lot of photos and then highlight someones face and it'll show you that persons face in every shot and you can pick which you like best and it'll intelligently put it in the photo without it looking like it's been pasted it. It's a very smart app.
Only problem, nothing like this on Android yet.

I think some one needs to port over that blackberry ten camera app to android... I would try to do it but I have no programming skills really.. sad..

robamacaf said:
iOS has an app called GroupShot that does just that. You can take a lot of photos and then highlight someones face and it'll show you that persons face in every shot and you can pick which you like best and it'll intelligently put it in the photo without it looking like it's been pasted it. It's a very smart app.
Only problem, nothing like this on Android yet.
Click to expand...
Click to collapse
You do know that the galaxy note 2 camera, that is ported for the gs3, has this exact feature... And its not a separate app. Just saying.
Sent from my SAMSUNG-SGH-I747 using XDA Premium HD app

[APP][ROOT][BETA] ButtonLED

New thread with updated ButtonLED.
Everything below this point is outdated.
Hey guys,
I've been fiddling around Tasker for the last few weeks and finally decided to create a fully functional app using it.
At this point, some of you will be thinking "Another useless, ugly, cluttered Tasker created app that does something nobody needs".
Well, then, I'll try to prove you wrong
Note: You do not need Tasker to use the app.
App Description:
ButtonLED is similar to NoLED: it allows you to have LED like notifications without actually having the LED light. However, NoLED uses uses your screen; ButtonLED only uses the hardware buttons' backlight (your screen stays off). It's customizable to an extent, with more to come depending on feedback and suggestions.
Features:
Pause for some user defined time on proximity (e.g. if phone is turned down, or is in your pocket);
Turn button backlight for X seconds, then off for Y seconds;
Should work on all devices since the user can locate the brightness file;
Notification exceptions (e.g. to ignore all notification that contain "Hello", add *Hello* to the exception list)
Logs
Compatibility:
It should work on all rooted devices. It will work out of the box (once you open it) for Samsung Galaxy Ace i devices (Galaxy Ace users will probably need to locate the brightness file), which is why I'm choosing to offer it for testing here. I'll release it in the Android Apps and Games section if the reviews are favorable. If not, I'll take their content into consideration and improve it before release it there.
Running the app:
Install, open, enable in accessibility. Done. You may need to select a different brightness file.
You may also want to customize the options.
On the Galaxy Ace i, the brightness file is located at:
/sys/devices/platform/bcm21553-leds/leds/button-backlight/brightness
Click to expand...
Click to collapse
For Galaxy Ace devices:
mohdnurr said:
/sys/devices/platform/pmic-leds/leds/button-backlight/brightness
Click to expand...
Click to collapse
Look for something similar on your device.
Screenshots (v1.0; needs updating):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Changelog:
V1.1 (24/10/12):
Missed call/Unread text notifications support. (can someone confirm ButtonLED v1.0 doesn't detect them? I'm almost certain it won't do anything for missed called/unread texts, but I'd rather be certain about it)
Optional permanent notification.
Option to use flashlight instead of the hard buttons' LED light.
Test button that will turn on and off the LED/flashlight.
Other minor modifications and fixes.
Downloads:
Don't forget to post your feedback! And when I say feedback, I don't mean the thanks button -instead, post a reply, write your opinion and include your comments.
Updating will reset the settings of the app.
V1.1:
View attachment ButtonLED.v1.1.apk
View attachment ButtonLED.v1.1.jb.test.apk (only try this one if you're using JB/JB based custom ROM (e.g. CM10))
V1.0:
View attachment ButtonLED.apk

Without words, you're amazing

Could you add an option for the camera LED or something ??

When i try to install it says app not installed
im on cm10/aokp/paranoidandroid rom (3 in 1) (PAC rom)
Sent from my GT-S5830 using xda premium

How do iknow it work?
Sent from my GT-S5830 using xda app-developers app

galaxy ace button backlight brightness file locations
/sys/devices/platform/pmic-leds/leds/button-backlight/brightness:laugh:
and it works.. but pause notification just keep on backlight or off which come first. its would be the best batery saving if its keep always off when pause
hit thanks if helped..
put quoute if needed

GermainZ said:
and finally decided to create a fully functional app
Click to expand...
Click to collapse
:good:
Fantastic app, it´s all I needed.
Really a minimalistic jewel.
Thanks.

RubenStauttener said:
Could you add an option for the camera LED or something ??
Click to expand...
Click to collapse
Added in v1.1, will release it later.
Would you like to use both (button + flashlight) or just one at the same time? In v1.1, you can only use one at a time, but I could change that.
AaronvAce said:
When i try to install it says app not installed
im on cm10/aokp/paranoidandroid rom (3 in 1) (PAC rom)
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
I'm not sure. It might be because it's not compatible with JB. Didn't think this would be an issue first, since our devices only support GB. Forgot about the regular Ace's custom ROMs.
I'll release a JB apk later, and hope it works.
ismon3 said:
How do iknow it work?
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
Test button added to v1.1 so you can make sure it will work.
Other than that, just wait for a notification (e.g. WhatsApp) while your screen is off.
mohdnurr said:
/sys/devices/platform/pmic-leds/leds/button-backlight/brightness:laugh:
and it works.. but pause notification just keep on backlight or off which come first. its would be the best batery saving if its keep always off when pause
hit thanks if helped..
put quoute if needed
Click to expand...
Click to collapse
Should be fixed in v1.1. Actually, it shouldn't be happening in v1.0 since I've already included a quick check that resets the brightness to 0, but I altered a few things in v1.1 that should make it fail proof.
@Qeemi/Toscanitex Thank you guys
Changelog of the upcoming v1.1 version:
Missed call/Unread text notifications support. (can someone confirm ButtonLED v1.0 doesn't detect them? I'm almost certain it won't do anything for missed called/unread texts, but I'd rather be certain about it)
Optional permanent notification.
Use flashlight instead of the hard buttons' LED light.
Test button that will turn on and off the LED/flashlight.
Other minor modifications.
I'll upload it as soon as I can, probably in the next 24 hours.
Keep the comments coming!
Also, if you think it's read to be released in the general Android Apps and Games section, please say so.
I'll get much more reviews, bug reports and suggestions there which will allow faster development if time allows it, but I don't want to release something unfinished there.

Good luck!
Sent from my GT-S5830 using xda premium

V1.1 released
You may notice it now needs more permissions. This is for the missed call/unread text notification support, and for the flashlight.
AaronvAce said:
When i try to install it says app not installed
im on cm10/aokp/paranoidandroid rom (3 in 1) (PAC rom)
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Can you try the buttonled.v1.1.jb.test.apk, please?

I tried it and it gave me the same message.
Sent from my GT-S5830 using xda premium

Work in cyanogenmod 7.2 nightly..missed call and sms work...but sometimes have force close..no big deal...can I request hide button led in status bar?anyway thank you so much...
Sent from my GT-S5830 using xda app-developers app

AaronvAce said:
I tried it and it gave me the same message.
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
No idea why that's happening, sorry. It could be an issue with your ROM, you might want to check logcats if you want.
ismon3 said:
Work in cyanogenmod 7.2 nightly..missed call and sms work...but sometimes have force close..no big deal...can I request hide button led in status bar?anyway thank you so much...
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
You can already do that: open ButtonLED, select "Permanent notification" and then press the "X" button.

GermainZ said:
No idea why that's happening, sorry. It could be an issue with your ROM, you might want to check logcats if you want.
I will try the app on a stock based rom and on cm9. I'll tell you what it does
EDIT: I installed it succesfully on cm9.
I Will try stocklite v7.1 (stock based 2.3.6) within 3 days.
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse

Ok, Houston, have a few situations here... with v1.1
The camera led it´s not working with buttonled, no way.
The log does not work.
After 5 hs. the battery power is on 20% , (only wifi is on)
So back to v1.0 and stay here for a moment.
(to be fair v1.0 it´s all I need, but...
Info about the phone:
GT-5830L Stock ROM, apps managed by link2sd.
AV: 2.3.4 / S5830LUBKPF
Kernel: 2.6.35.7-perf-cl567486 [email protected] #1
Rooted.

Toscanitex said:
Ok, Houston, have a few situations here... with v1.1
The camera led it´s not working with buttonled, no way.
The log does not work.
After 5 hs. the battery power is on 20% , (only wifi is on)
So back to v1.0 and stay here for a moment.
(to be fair v1.0 it´s all I need, but...
Info about the phone:
GT-5830L Stock ROM, apps managed by link2sd.
AV: 2.3.4 / S5830LUBKPF
Kernel: 2.6.35.7-perf-cl567486 [email protected] #1
Rooted.
Click to expand...
Click to collapse
About the camera LED, just to make sure:
Open ButtonLED;
Select "Use flashlight ...";
Press the "✓" button;
Select "Test ButtonLED". Your flashlight should turn on and off.
If it doesn't work, and if you have Tasker (or if you can install the trial version), can you try creating a simple task that will turn the "Torch" on then off? Just to make sure that Tasker feature is compatible with your phone (the documentation says it's not compatible with all phones).
Regarding the battery, I don't see why that would happen, unless you left your phone with ButtonLED active for those five hours (when I say active, I mean turning your LED on and off), especially that nothing, battery wise, has changed from v1.0 to v1.1.
Did you flash a new ROM lately? If so, try recalibrating your battery.
For the logs, what exactly do you mean when you say they don't work?
Are they inaccurate? In that case, I fixed it in v1.2. It was a slight issue causing skipped notifications to be displayed as "processed" in the logs (e.g. if your screen is on, ButtonLED will skip a notification; v1.1 will mark it as processed in the logs, tho).
If it's something else (e.g. logs not showing up, some other issue), please specify.
Thanks for the reports

Ok..thank you so much ..
Sent from my GT-S5830 using xda app-developers app

AaronvAce said:
I tried it and it gave me the same message.
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
I just remembered that pushing the app using adb should give you more information about why the installation failed, so please try that.

Hi, I found this app on Tasker groups (thanks to the author)
However on my device (galaxy s2 with cyanogen10) I have no /sys/devices/platform/*-leds/leds/ and on tasker Set Light says it's not available on my device...
It's a ROM problem I suppose, because keys backlight are present (as hardware) and supported by the ROM (they turn on and there is an option to use or not use them!). Should I ask to cyanogen developers?
again thanks

SuperKrog said:
Hi, I found this app on Tasker groups (thanks to the author)
However on my device (galaxy s2 with cyanogen10) I have no /sys/devices/platform/*-leds/leds/ and on tasker Set Light says it's not available on my device...
It's a ROM problem I suppose, because keys backlight are present (as hardware) and supported by the ROM (they turn on and there is an option to use or not use them!). Should I ask to cyanogen developers?
again thanks
Click to expand...
Click to collapse
Yeah, it's probably hidden somewhere else.
Did some googling and found that for the One X (running CM10), it's /sys/devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-led/leds/button-backlight/currents
Other users say that /sys/class/leds/button-backlight/brightness works instead.
So you could also try looking for something similar.
Make sure to report back once you find it

LED-light colors with notifications

Hello,
I was wondering if it's possibile to choose specific color for the LED-light when a notification pops-up.
Like:
Red with Gmail
Blue with Facebook
Green with WhatsApp
Thank you!

This should be possible, try "Lightflow"

ahhlix said:
This should be possible, try "Lightflow"
Click to expand...
Click to collapse
Thanks, a great app!

light flow didnt work on my gs3, does it work with the note 2?

loveshinesthru said:
light flow didnt work on my gs3, does it work with the note 2?
Click to expand...
Click to collapse
Yup
Sent from my SPH-L900 using xda app-developers app

Drumpie27 said:
Thanks, a great app!
Click to expand...
Click to collapse
No problem, glad it worked for you

Doesnt work for me.

Things get crazy with light flow on the gn2. It works sort of, but there is something wrong.

Light flow made my phone talk to me when I didn't want it to.
"The folder is open"
"The folder is closed"

I have go SMS and by default the notification led is yellow.

IT wouldnt do anything for me. I could see the led light up for the test, but otherwise it just wouldnt do anything.