Hi there,
Here is seperate thread for E988 (HK version) and F240 (KR version)
Please refer all detail / procedures from here (the original thread from thecubed)
http://forum.xda-developers.com/showthread.php?t=2360369
I would like to thanks @djrbliss & @thecuded for all their contributions
Here is the LOKI thread and with source code URL in github
http://forum.xda-developers.com/showthread.php?t=2358871
!!!!!!!!!!!I Am Not Responsible For Any Problems Due To Flashing This Image!!!!!!!!!!!!!!
Make sure you do your own backup
e.g. rooted access and backup your existing recovery image to /sdcard
adb shell
su
dd if=/dev/block/platform/msm_sdcc.1/by-name/recovery of=/sdcard/recovery.img
HK: E988
Recovery: (TWRP / CWM)
https://mega.co.nz/#!9F4ixQhJ!MX9Fqkta7CJ-7sjdv-KkgwDk0AYwjBz9LKHDyIuaWa8
https://mega.co.nz/#!sN5SVZpQ!CQ3KSzDdowmop96I0wrw9Bvxl5FOruWqwXX1u4r0ccE
<< In fact, all F240 L, K, S using the same signature in aboot.img, so I just use the LOKI to patch each individually (so silly). You can cross flash in between L, K & S >>
KR: F240K
Recovery: (TWRP / CWM)
https://mega.co.nz/#!5JIFzbJZ!OP_JPTT1YGWohZ_hzp4FQCF4fgZJ-94pyqP2eIdrFy0
https://mega.co.nz/#!NUYXXQQS!BiT_YmA5Yk5L7lrHyaQFeXdVHawCWlY1csbHH728IQM
KR: F240S
Recovery: (TWRP / CWM)
https://mega.co.nz/#!FBpFGZYJ!E7JwKXMrF7izYne0QbVFz0-5P-JXWceIqWUV9EHYS4k
https://mega.co.nz/#!ZVB1nApT!SfKEL1jsNLEhNlANb0cV2hNMaPRFHe0NXBoXkmXq0-c
KR: F240L
Recovery: (TWRP / CWM)
https://mega.co.nz/#!kJRT3IBT!MXDRgCOJGJJWc967Umoog3WcGJ1UXIiJbZN_I1wGH3E
https://mega.co.nz/#!pZpC0RiY!Gb1AalocIez8dUyRPu3mPCco8lp6ANap7mSP4WQ2YNA
Click to expand...
Click to collapse
How to get recovery mode:
Power off your phone, then press "Power + Vol Up + Home" at the same time
or
if you have USB connected (debug option turn on in your phone), issue "adb reboot recovery"
PS: TWRP sometimes has touch problem (still don't know why), you need to use power off method to get recovery mode (it works almost).
How to restore your stock recovery
(I am assumming your backup recovery (stock) image in /sdcard)
adb shell
su
dd if=/sdcard/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
Hi hkfriends,
My GPros model number is E988. But I'm from India and LG is selling Gpro in India.
Do you think indian version is different from Hongkong E988 ?
My software version is E98810a.
Can u also pls give me a link to root this model ?
success
thnks, unlock and then boot success.
My device is 240L.
Well done!
hkfriends said:
Hi there,
Here is seperate thread for E988 (HK version) and F240 (KR version)
Please refer all detail / procedures from here (the original thread from thecubed)
http://forum.xda-developers.com/showthread.php?t=2360369
I would like to thanks @djrbliss & @thecuded for all their contributions
Here is the LOKI thread and with source code URL in github
http://forum.xda-developers.com/showthread.php?t=2358871
!!!!!!!!!!!I Am Not Responsible For Any Problems Due To Flashing This Image!!!!!!!!!!!!!!
Make sure you do your own backup
e.g. rooted access and backup your existing recovery image to /sdcard
adb shell
su
dd if=/dev/block/platform/msm_sdcc.1/by-name/recovery of=/sdcard/recovery.img
Click to expand...
Click to collapse
Touch is weird. I think there was a problem with screen resolution
and I cannot flash F240S's TWRP.
F240k's works just fine, though
sachinaik said:
Hi hkfriends,
My GPros model number is E988. But I'm from India and LG is selling Gpro in India.
Do you think indian version is different from Hongkong E988 ?
My software version is E98810a.
Can u also pls give me a link to root this model ?
Click to expand...
Click to collapse
yes, try this one
https://mega.co.nz/#!xJxVGaJD!S2sGqk-7euyyNxpdA9jIrXLBR7Jd5FKdsJXnVx3lahI
reider123 said:
Touch is weird. I think there was a problem with screen resolution
and I cannot flash F240S's TWRP.
F240k's works just fine, though
Click to expand...
Click to collapse
yes, i know TRWP has touch issue in some cases, i need power off and using hardware keys to recovery mode, then 90% will ok
for the moment , thecubed also looking thjs issue....
what is the problem of F240S twrp flashing problem, let me know to fix it.
kevinwzh said:
thnks, unlock and then boot success.
My device is 240L.
Well done!
Click to expand...
Click to collapse
good to hear ...
for flashing permanent recovery has both good and bad side:
pro: we can restore any issue by twrp or cwm backup
con: we cannot OTA update directly until we flash back stock recovery
hkfriends said:
good to hear ...
for flashing permanent recovery has both good and bad side:
pro: we can restore any issue by twrp or cwm backup
con: we cannot OTA update directly until we flash back stock recovery
Click to expand...
Click to collapse
Oo. I believe we will have more customerizarion rom other than official update. But HK,could u pls provide the way to rollback to the original recovery img if we want to receive the ota update?
Thnks.
cool. really thanks. :good:
I'm using f240l.
but I don't know how to boot to recovery.
and,
easy-twrp-f240l does not work.
[-] Failed to open gk-twrp-f204l.lok for reading.
Click to expand...
Click to collapse
what does this mean?
hkfriends said:
yes, i know TRWP has touch issue in some cases, i need power off and using hardware keys to recovery mode, then 90% will ok
for the moment , thecubed also looking thjs issue....
what is the problem of F240S twrp flashing problem, let me know to fix it.
Click to expand...
Click to collapse
cannot read error, though
One more question:what's the key combo to get into recovery?
Edit:no need to know key combo. I figured it out
hkfriends said:
yes, try this one
https://mega.co.nz/#!xJxVGaJD!S2sGqk-7euyyNxpdA9jIrXLBR7Jd5FKdsJXnVx3lahI
Click to expand...
Click to collapse
Hello hkfriends,
This link doesn't work. Can u pls send a dropbox link or attach it here?
Also instructions on how to install the zip pls
Sent from my LG OptImus G Pro E-988
leechanee1 said:
cool. really thanks. :good:
I'm using f240l.
but I don't know how to boot to recovery.
and,
easy-twrp-f240l does not work.
what does this mean?
Click to expand...
Click to collapse
1) to recovery: When your phone in power off mode, press "Power + Vol Up + Home" at the same time, wait it flash to boot twice
2) do you have rooted your G Pro?
sachinaik said:
Hello hkfriends,
This link doesn't work. Can u pls send a dropbox link or attach it here?
Also instructions on how to install the zip pls
Sent from my LG OptImus G Pro E-988
Click to expand...
Click to collapse
Try this one
http://uploaded.net/file/hevc2gvi
kevinwzh said:
Oo. I believe we will have more customerizarion rom other than official update. But HK,could u pls provide the way to rollback to the original recovery img if we want to receive the ota update?
Thnks.
Click to expand...
Click to collapse
Added instruction in #1
hkfriends said:
Try this one
http://uploaded.net/file/hevc2gvi
Click to expand...
Click to collapse
Downloaded it from Mega link : -)
Pls give me instructions for rooting the phone...
Sent from my LG OptImus G Pro E-988
hkfriends said:
1) to recovery: When your phone in power off mode, press "Power + Vol Up + Home" at the same time, wait it flash to boot twice
2) do you have rooted your G Pro?
Click to expand...
Click to collapse
1) thanks!
2) of course! i'm using cwm now. maybe bat problem?
.\files\adb.exe shell "echo '--BEGIN PHONE SIDE--';cd /data/local/tmp;chmod 755 loki_flash;su -c './loki_flash recovery gk-twrp-f204l.lok';echo '--END PHONE SIDE--'"
sachinaik said:
Downloaded it from Mega link : -)
Pls give me instructions for rooting the phone...
Sent from my LG OptImus G Pro E-988
Click to expand...
Click to collapse
turn on your phone debug=on
1) Setting => Developer option => usb debugging (set on)
2) extract the zip
3) run root.exe
hkfriends said:
turn on your phone debug=on
1) Setting => Developer option => usb debugging (set on)
2) extract the zip
3) run root.exe
Click to expand...
Click to collapse
It is struck in "daemon started successfully"
Sent from my LG OptImus G Pro E-988
sachinaik said:
It is struck in "daemon started successfully"
Sent from my LG OptImus G Pro E-988
Click to expand...
Click to collapse
make sure you have adb drivers installed correctly
check driver, reboot PC + mobile and re-try
PS: test
adb devices
you should see your device ID, otherwise your adb drivers in pc is not working
leechanee1 said:
1) thanks!
2) of course! i'm using cwm now. maybe bat problem?
.\files\adb.exe shell "echo '--BEGIN PHONE SIDE--';cd /data/local/tmp;chmod 755 loki_flash;su -c './loki_flash recovery gk-twrp-f204l.lok';echo '--END PHONE SIDE--'"
Click to expand...
Click to collapse
no... it sounds L is different.......
my founding, when comparing K & S are identical binary
but L is totally different from K or S (either TWRP or CWM)
it sounds strange...to me, if the LOKI using the the same signature for all KR version
If you can use CWM on K or S, I think it is ok
can you test for me, try flash gk-twrp-f204S , and see whehter you can use it?
Related
Hi,
With vol+ and Power Can only get Help mode (using this mode, service center can back up and recover your data. Press and hold Power key more than 8 seconds to reboot).
Help please.!!!! :fingers-crossed:
Want flash Eu rom to get French, how-to doit please?Phone is rooted.
What's unlocking bootloader?
Ok Guys, thanks for your replies.
Found Freegee.Do it.
Thks.:highfive:
Oualdo said:
Ok Guys, thanks for your replies.
Found Freegee.Do it.
Thks.:highfive:
Click to expand...
Click to collapse
Now go to Play Store and download FreeGee
Make a backup of your EFS data and Unlock the bootloadr (choose CWM as the recovery option).
Once done, you reboot as you described. When you see the text in the lower left corner, press volume down twice and then power. You will boot into CWM.
rogem_kk said:
Now go to Play Store and download FreeGee
Make a backup of your EFS data and Unlock the bootloadr (choose CWM as the recovery option).
Once done, you reboot as you described. When you see the text in the lower left corner, press volume down twice and then power. You will boot into CWM.
Click to expand...
Click to collapse
Phone is bricked on LG logo after Twrp install
The market FreeGee is only for ICS I believe. You need the FreeGee Beta to unlock the E975.
LG Optimus G E971/3/5
icriio supercargo
Elisha said:
The market FreeGee is only for ICS I believe. You need the FreeGee Beta to unlock the E975.
LG Optimus G E971/3/5
Click to expand...
Click to collapse
Ok but is bricked yet after market freegeee install.
And now ? :crying:
Oualdo said:
Ok but is bricked yet after market freegeee install.
And now ? :crying:
Click to expand...
Click to collapse
KDZ back to stock: http://lg-phone-firmware.com/index.php?id_mod=20
LG Optimus G E971/3/5
freegee not suport e975v10a
Elisha said:
KDZ back to stock: http://lg-phone-firmware.com/index.php?id_mod=20
LG Optimus G E971/3/5
Click to expand...
Click to collapse
Its OK after Kdz.
Phone is now root E97510b_open_ EU, was first E97510b_open_HK. Good so, Im french.
Goes Freegee with this Rom ? ?
Thanks for tip Elisha. :laugh:
Oualdo said:
Its OK after Kdz.
Phone is now root E97510b_open_ EU, was first E97510b_open_HK. Good so, Im french.
Goes Freegee with this Rom ? ?
Thanks for tip Elisha. :laugh:
Click to expand...
Click to collapse
Thank
i also have the same problem, so i just coping.............................
Hi,
With vol+ and Power Can only get Help mode (using this mode, service center can back up and recover your data. Press and hold Power key more than 8 seconds to reboot).
Help please.!!!!
update my F180L, thanks
Thanks for this one. I was able to update my F180L very easily with this one ( it was converted to a E975 4.1.2 ).
All I had to do was install these 2 zips here plus the KK modem patch one which I'll post again here ( it's post somewhere else too if you look around ) :
http://www2.zippyshare.com/v/48224166/file.html
Pretty easy and straightforward way of converting but I'm not sure it works if your F180L wasn't converted before. Mine was however and this worked just fine.
Hey, guys!
Here is the CWM 6.0.4.4 recovery for our LG Optimus G pro (e98x), both .img and .lok, maybe the fxxx need .img
the name of these recoverys is "geefhd", if your ROM's updater-script doesn't compat this, please pay attention on it
.lok
http://pan.baidu.com/s/1265DP
.img
http://pan.baidu.com/s/1inJ2i
And then, if you are interested of AOSP KitKat, I am working on it for some times, and the bugs now is camera and gps.
My source is here:
https://github.com/airk000/android_device_lge_geefhd-common
https://github.com/airk000/android_device_lge_geefhd_hk
airk000 said:
Hey, guys!
Here is the CWM 6.0.4.4 recovery for our LG Optimus G pro (e98x), both .img and .lok, maybe the fxxx need .img
the name of these recoverys is "geefhd", if your ROM's updater-script doesn't compat this, please pay attention on it
.lok
http://pan.baidu.com/s/1265DP
.img
http://pan.baidu.com/s/1inJ2i
And then, if you are interested of AOSP KitKat, I am working on it for some times, and the bugs now is camera and gps.
My source is here:
https://github.com/airk000/android_device_lge_geefhd-common
https://github.com/airk000/android_device_lge_geefhd_hk
Click to expand...
Click to collapse
how can we use them ?
donalgodon said:
how can we use them ?
Click to expand...
Click to collapse
I modified a TWRP installer with this CWM. Replaced TWRP with CWM on my E986 and it works. Updated adb.exe to work with 4.4.
To install just extract the zip contents and run the batch file.
Isamu_Dyson said:
I modified a TWRP installer with this CWM. Replaced TWRP with CWM on my E986 and it works. Updated adb.exe to work with 4.4.
To install just extract the zip contents and run the batch file.
Click to expand...
Click to collapse
It works. I installed it on 4.4, by the way.
Thanks a lot.
Any chance for a flashable zip file please?
donalgodon said:
It works. I installed it on 4.4, by the way.
Thanks a lot.
Click to expand...
Click to collapse
Is it lokified? Can you flash Madmacks 4.4 KitKat with this recovery?
Thanks in advance.
Erik
Nevermind, I read your signature and you updated it with the new recovery, thanks!
Erik
airk000 said:
Hey, guys!
Here is the CWM 6.0.4.4 recovery for our LG Optimus G pro (e98x), both .img and .lok, maybe the fxxx need .img
the name of these recoverys is "geefhd", if your ROM's updater-script doesn't compat this, please pay attention on it
.lok
http://pan.baidu.com/s/1265DP
.img
http://pan.baidu.com/s/1inJ2i
And then, if you are interested of AOSP KitKat, I am working on it for some times, and the bugs now is camera and gps.
My source is here:
https://github.com/airk000/android_device_lge_geefhd-common
https://github.com/airk000/android_device_lge_geefhd_hk
Click to expand...
Click to collapse
Hi, can someone please mirror these files as it is very difficult to download due to speed
roshandes said:
Hi, can someone please mirror these files as it is very difficult to download due to speed
Click to expand...
Click to collapse
You actually don't need those files, just look at post #3 and download that and run it on you pc with the phone connected.
Erik
ricco333 said:
You actually don't need those files, just look at post #3 and download that and run it on you pc with the phone connected.
Erik
Click to expand...
Click to collapse
Hello there
Just download and run the bat file and done?
I already have cwm v6.0.3.7. Can i just flash it over?
tomi001 said:
Hello there
Just download and run the bat file and done?
I already have cwm v6.0.3.7. Can i just flash it over?
Click to expand...
Click to collapse
No, you can't flash those files, but if you want to update CWM, why don't you install Philz recovery for the e980, it is great.
Erik
ricco333 said:
No, you can't flash those files, but if you want to update CWM, why don't you install Philz recovery for the e980, it is great.
Erik
Click to expand...
Click to collapse
The problem is i have the e986.
is there a way i can flash this recovery? I installed PhilZi's recovery and my phone is messed up. I forgot to enable loki support and flash a rom, and then my phone is only booting to recovery. the system folder is always empty whatever i flashed. there is something wrong with my phone, so that i also cannot flash a kdz file. it always return error.
my only chance of getting the phone back is to flash the recovery. can anyone help me with that pls?
spiderx_mm said:
is there a way i can flash this recovery? I installed PhilZi's recovery and my phone is messed up. I forgot to enable loki support and flash a rom, and then my phone is only booting to recovery. the system folder is always empty whatever i flashed. there is something wrong with my phone, so that i also cannot flash a kdz file. it always return error.
my only chance of getting the phone back is to flash the recovery. can anyone help me with that pls?
Click to expand...
Click to collapse
Bro please don't flash CWM now it will be of no use after reboot you will return back to recovery only.. first go for TWRP.. get the rom flashed & then if you required go for CWM..
roshandes said:
Bro please don't flash CWM now it will be of no use after reboot you will return back to recovery only.. first go for TWRP.. get the rom flashed & then if you required go for CWM..
Click to expand...
Click to collapse
how can i get TWRP? my phone can only go in to PhilZi's recovery, and my /system folder is already empty. i can't get anywhere
spiderx_mm said:
how can i get TWRP? my phone can only go in to PhilZi's recovery, and my /system folder is already empty. i can't get anywhere
Click to expand...
Click to collapse
Go here : http://d-h.st/HNa
Uploaded by : ballshanglow
just download it & put in your card or in phone using recovery mount usb options..after that flash & enjooooy..
roshandes said:
Go here : http://d-h.st/HNa
Uploaded by : ballshanglow
just download it & put in your card or in phone using recovery mount usb options..after that flash & enjooooy..
Click to expand...
Click to collapse
thanks, I'll try.
update: ... now I can boot into TWRP. and it is not reading my 32GB External SD card where i put all the Roms and nandroid backup. ...
more updates ... somehow I found a downloaded OTA zip file from CM11. I'm flashed it and booting now.
Thanks a lot for saving my neck bro.
hiii .
.i can used for e988 v20a ??
Please help I'm using E988 hongkong, how can I flash the right recovery to able to flash custom 4.4 rom?
Thank you guys
roshandes said:
Go here : (Link deleted because no 10 Posts)
Uploaded by : ballshanglow
just download it & put in your card or in phone using recovery mount usb options..after that flash & enjooooy..
Click to expand...
Click to collapse
I have a e986 german with Stock 20a EU 4.4.2
If I installed cwm it gives me a boot loop into recovery. So I must install my rom via kdz tool and so I have no recovery yet. I found no way to flash a working recovery and unlock bootloader for my phone.
Can I flash this under e986eu20a?
nunuc said:
I have a e986 german with Stock 20a EU 4.4.2
If I installed cwm it gives me a boot loop into recovery. So I must install my rom via kdz tool and so I have no recovery yet. I found no way to flash a working recovery and unlock bootloader for my phone.
Can I flash this under e986eu20a?
Click to expand...
Click to collapse
I have send you a PM.
helloo everybody as u can see i am new here and i dont know much about flashing and everything i just bought LG F180 yesterday.. now i want to convert my phone to E975 as i saw few threads that it is possible .. The thing is in software information menu my software version is F180S20n i need your help which KDZ file i should use? and is it safe to convert my phone ? like many people here have issues like no signals etc..
thanks in advance cheers :laugh:
hash.86 said:
helloo everybody as u can see i am new here and i dont know much about flashing and everything i just bought LG F180 yesterday.. now i want to convert my phone to E975 as i saw few threads that it is possible .. The thing is in software information menu my software version is F180S20n i need your help which KDZ file i should use? and is it safe to convert my phone ? like many people here have issues like no signals etc..
thanks in advance cheers :laugh:
Click to expand...
Click to collapse
mostly not recommended to do so...!!happy with way yu have....
hasan4791 said:
mostly not recommended to do so...!!happy with way yu have....
Click to expand...
Click to collapse
you didnt tell me which KDZ file i should use sir
hash.86 said:
you didnt tell me which KDZ file i should use sir
Click to expand...
Click to collapse
I'm telling it is not recommended to convert F180 to E975...many facing problems coz of that..even in custom roms..
hasan4791 said:
I'm telling it is not recommended to convert F180 to E975...many facing problems coz of that..even in custom roms..
Click to expand...
Click to collapse
okay... is it possible to remove these korean apps? and whats the latest rom available for f180?
hash.86 said:
okay... is it possible to remove these korean apps? and whats the latest rom available for f180?
Click to expand...
Click to collapse
In stock its 4.1.2
In custom roms its CM11(4.4.2)
ya yu can remove korean apps....yu need to root and unlock the bootloader...checking FAQ thread in this section
hasan4791 said:
In stock its 4.1.2
In custom roms its CM11(4.4.2)
ya yu can remove korean apps....yu need to root and unlock the bootloader...checking FAQ thread in this section
Click to expand...
Click to collapse
thank you
hasan4791 said:
In stock its 4.1.2
In custom roms its CM11(4.4.2)
ya yu can remove korean apps....yu need to root and unlock the bootloader...checking FAQ thread in this section
Click to expand...
Click to collapse
is it still risky if i flash a rom on my f180 and have signal problem? i saw few post here that people having problem like no signals after flashing?
can u recomend a stable,smooth and fast rom?
hash.86 said:
is it still risky if i flash a rom on my f180 and have signal problem? i saw few post here that people having problem like no signals after flashing?
can u recomend a stable,smooth and fast rom?
Click to expand...
Click to collapse
I convert my f180l to e975 successfully. Now am using avatar rom 4.2.2 nightly. I recommend you a external link.keep in mind about your model s/k/l. I use Europe open kdz from here.
we from same country using same network and having same phone.hahaha
Originally Posted by hash.86
is it still risky if i flash a rom on my f180 and have signal problem? i saw few post here that people having problem like no signals after flashing?
can u recomend a stable,smooth and fast rom?
Click to expand...
Click to collapse
I convert my f180l to e975 successfully. Now am using avatar rom 4.2.2 nightly. I recommend you a external link.keep in mind about your model s/k/l. I use Europe open kdz from here.
we from same country using same network and having same phone.hahaha
Click to expand...
Click to collapse
Got it... But the thing is my phone is F180s but if I want to convert my phone to E975 I have to flash E975's kdz first and that doesn't come with s k or l... Getting my point ??
Sent from my LG-F180S using xda app-developers app
hash.86 said:
Got it... But the thing is my phone is F180s but if I want to convert my phone to E975 I have to flash E975's kdz first and that doesn't come with s k or l... Getting my point ??
Sent from my LG-F180S using xda app-developers app
Click to expand...
Click to collapse
Yes I know but keep in mind about s. Coz if there is any problem S help you allot for flashing your own baseband. I recommend you European open kdz.but I am not responsible for any thing. Do it on your own risk. Its not danger all the time coz many people do that successfully.
instead of kdz e975 firmware, why not try to flash a rom directly from f180 fw? maybe in this manner you won't have any signal prob. HTH
hpesojames said:
instead of kdz e975 firmware, why not try to flash a rom directly from f180 fw? maybe in this manner you won't have any signal prob. HTH
Click to expand...
Click to collapse
i tried to flash ""miui_f180_rogue_4.1.4_4f763bb611_4.2"" to my f180s but this error comes every time assert failed: get prop("ro.product") == "e75" || get prop("ro.product") == "e75"
wooooooooooohoooooooooooooo converted my phone successfully flashed my modem img and got back the signals... thank u all for ur guidance
hash.86 said:
wooooooooooohoooooooooooooo converted my phone successfully flashed my modem img and got back the signals... thank u all for ur guidance
Click to expand...
Click to collapse
what method did you used?
hpesojames said:
what method did you used?
Click to expand...
Click to collapse
PHASE ONE (BACK UP PHASE)
1- made efs backup using "g tool pro"
2- downloaded "Android Terminal Emulator" from playstore
open emulator in phone wrote
su
dd if=/dev/block/platform/msm_sdcc.1/by-name/modem of=/sdcard/modem.img
after some seconds this came out :
131072+0 records in
131072+0 records out
67108864 bytes transferred in 15.229 secs
then :
exit
exit
after that i checked sdcard but there was no img file...
then i open file manager from the phone and there it was my precious
PHASE TWO TOOLS YOU NEED
first of all thanks to dreamkill3r
1)pc with windows
2)cable usb
3)the phone
4)internet access
5)kdz flasher
6) the kdz itself (all of these files you can find on the topic of converting f180 to e975)
7)framaroot app from playstore
8)drivers Lgunitedmobiledriver + other drivers described in xda topic
9) root explorer
PHASE THREE CONVERSION
1) Charge your phone at least 50 %
2) Save your data (photos , music, documents, etc. )
3 ) install on your phone framaroot and get root acces
4 )install Root Explorer
5) Make a Hard reset (turn off the phone,when it's turned off,hold down volume "-" and then press the power button , the text will appear , confirm the process by pressing twice the power button , the phone automatically reboots )
6) Turn off the phone
7) Install all the drivers
8) Extract the KDZ flasher
9) Run the file ( in the extracted folder ) msxml.msi
10) Connect your phone in "Download" mode ( simultaneously hold down the volume "-" and "+" and plug into your computer the USB- cable; it should appear a gray box on a black background where should be written download mode)
11 ) Run KDZ_FW_UPD.exe ( for windows "seven " as an administrator ) , in the box choose - 3GCQT; in the window phonemode - DIAG
12) Click on the blank line with a folder , select where your firmware(kdz) is , click "Launch software Update"
13 ) Wait 10-15 minutes , when the phone is flashed , click "Exit"
14) Turn off the phone, do a Hard reset ( see item number 6)
15 ) install again Framaroot and Root Explorer, get root acces
16) Reboot your phone
17) your phone is ready to use
18) if you have the signal problem use ur modem backup.. flash it and issue gone
now u can flas any E975 ROM you want
************************
************************
* You can download files under the name " LG G Recovery Kit 4.4.2 Kat.zip " to extract okay . And we are the files inside the folder where you unzipped the .
* Requires root and you have debug mode enabled " USB Debugging " on the phone and plug in the phone cable connection type you select software LG " LG software " okay and waited range 5 - 10S for the receiving computer out of your equipment .
* Now you only need to run the file " F180XXX RECOVERY.bat " in accordance with your hostname okay .
* That's it now sits crank enjoy the new rom via this recovery only.
* You okay in recovery as on 4.1.2 . Turn off the power would go and press the volume keys together 2 1 time and then press the power key is not always drop the arms until the table many letters appear, press the volume drop arm moves to recovery and press the power key offline.
Download
Tự hào khi vn
Sent from my LG-E975 using XDA Premium 4 mobile app
It can be installed on the e975?
Mytagen said:
It can be installed on the e975?
Click to expand...
Click to collapse
only for devices LG F180LSK.
On 4pda already installed on the e975 work
Mytagen said:
On 4pda already installed on the e975 work
Click to expand...
Click to collapse
i flashed vdt rom v18 which is based on cm 11 ......... and also the patch.. but it didnt boot at all.. only blank screen....after google logo.. tried flashing cm based keernels but didnt work
krishnanmailbox1 said:
i flashed vdt rom v18 which is based on cm 11 ......... and also the patch.. but it didnt boot at all.. only blank screen....after google logo.. tried flashing cm based keernels but didnt work
Click to expand...
Click to collapse
I've never been able to boot with any version vdt ROM.
If you can't get past Google logo, try to flash stock v10i firmware first . Supposedly it changes partition to 2,1gb and after that you can flash any stock kitkat Rom . I had v10i and had no problems whatsoever with installation of paulis Rom or slingrom....
Sent from my LG-F180L using XDA Free mobile app
why do you name the thread "Recovery 4.4.2 Kit Kat stock LG G" ??
its CWM Recovery....
on stock u can unlock bootloader via freegee easy and use any bootloader and andy recovery!
u can flash on F180SLK and E975 any recovery from F180SLK or E975! its same device but remember! with eg F180K recovery u can only flash F180K roms, when updater-script made for one device name...
Worst ever seen guide. Dont understand what he is writing.
vandieutot said:
************************
************************
* You can download files under the name " LG G Recovery Kit 4.4.2 Kat.zip " to extract okay . And we are the files inside the folder where you unzipped the .
* Requires root and you have debug mode enabled " USB Debugging " on the phone and plug in the phone cable connection type you select software LG " LG software " okay and waited range 5 - 10S for the receiving computer out of your equipment .
* Now you only need to run the file " F180XXX RECOVERY.bat " in accordance with your hostname okay .
* That's it now sits crank enjoy the new rom via this recovery only.
* You okay in recovery as on 4.1.2 . Turn off the power would go and press the volume keys together 2 1 time and then press the power key is not always drop the arms until the table many letters appear, press the volume drop arm moves to recovery and press the power key offline.
Download
Click to expand...
Click to collapse
How do I active the "USB DEBUGGING" on the stock Kitkat 4.4.2 for F180L?
I cant find it on the setting
SABman12 said:
How do I active the "USB DEBUGGING" on the stock Kitkat 4.4.2 for F180L?
I cant find it on the setting
Click to expand...
Click to collapse
it's in "Developer options" in Settings. First you have to enable these settings by tapping on Build number in About phone>Software information
Tap 7 times on build number
2nd Sky said:
why do you name the thread "Recovery 4.4.2 Kit Kat stock LG G" ??
its CWM Recovery....
on stock u can unlock bootloader via freegee easy and use any bootloader and andy recovery!
u can flash on F180SLK and E975 any recovery from F180SLK or E975! its same device but remember! with eg F180K recovery u can only flash F180K roms, when updater-script made for one device name...
Click to expand...
Click to collapse
Can freegee unlock bootloader of lg-180k running android version 4.4.2?
Da Legend said:
Can freegee unlock bootloader of lg-180k running android version 4.4.2?
Click to expand...
Click to collapse
yes.
akahroba said:
yes.
Click to expand...
Click to collapse
Bootloader already unlocked by freegee. Can you point me to a thread where I can flash lollipop into f180k? Can't find it.
Sent from my LG-F180K using XDA Free mobile app
Just go to the android development thread and search there . How hard is that? Can't you discover anything by youself?
TheJoker0 said:
Just go to the android development thread and search there . How hard is that? Can't you discover anything by youself?
Click to expand...
Click to collapse
I have been searching bro. I'm presently using a custom lollipop ROM with no signals.
Sent from my Optimus G using XDA Free mobile app
I don't know a lot about the 180k since the one I have is e975... I don't know what will happen if you flash a GEEHRC rom...
Hi all,
I have spent hours on google and xda trying to find a solution to my problem.
This is what happened:
I installed by fastboot mode: the boot.img and recovery.img, but mistakenly uploaded files V10. (My current version is V20)
No enters Download mode and Recovery. Instead, LED lights are lit in blue and red.
The phone runs smoothly.
I am open to any suggestions as you truly are my last resort.
Sorry for my English.
--------------------------------
LG G3
5.0
3.4.0
V20h-736-03
--------------------------------
No recovery and no download mode, but you can boot normally and if yes , are you root ?
I don't understand all, you are on 20H stock version and you can flash by fastoot commands the boot and recovery ?
jac10000 said:
No recovery and no download mode, but you can boot normally and if yes , are you root ?
I don't understand all, you are on 20H stock version and you can flash by fastoot commands the boot and recovery ?
Click to expand...
Click to collapse
Seeking to recover the Download mode
I installed files in the V10 version
by mode fastboot
yes, i´m root
:crying:
pardodudu said:
Seeking to recover the Download mode
I installed files in the V10 version
by mode fastboot
yes, i´m root
:crying:
Click to expand...
Click to collapse
You are root and the G3 boot normaly and run ?
If yes we can flash by dd commands kitkat aboot and kitkat , bump boot and custom recovery
---------- Post added at 21:50 ---------- Previous post was at 21:38 ----------
Ok if your G3 run normally
download LGG3-D855-OneClickRootRecoveryV1.1.zip here : http://forum.xda-developers.com/lg-g3/general/d855-one-click-root-twrp-recovery-t3072767/post59895642#post59895642
But instead of running the script, you apply the method by commands lines: http://forum.xda-developers.com/showpost.php?p=59931455&postcount=104
Aboot and laf are downgrade to kitkat, bump boot and custom recovery will also be installed
Make sure you are enable USB Debuging Mode
@bender_007 , here it's the kitkat boot witch was flashed, autorec don't work I think ?
I don't think his system is bootable, because of bootloader(don't know what else he flashed)
But autorec would run over the current kernel so it would be fine if he could boot, which he can't .
Can you still access fastboot ?
bender_007 said:
I don't think his system is bootable, because of bootloader(don't know what else he flashed)
But autorec would run over the current kernel so it would be fine if he could boot, which he can't .
Can you still access fastboot ?
Click to expand...
Click to collapse
No I think of having understood that he can start normally the G3 but have not download mode or recovery mode. His g3 run slowly because of kitkat boot.
I thought of making him install alls files by commands lines because I because I am afraid that by restoring only Lollipop stock boot it's bricked the G3
Ok, let me know what you think he needs (can't look into it right now, busy) but will create a flashable
bender_007 said:
Ok, let me know what you think he needs (can't look into it right now, busy) but will create a flashable
Click to expand...
Click to collapse
He have not recovery, flashable can't work. He can just apply commands line with adb like this I think : http://forum.xda-developers.com/showpost.php?p=59931455&postcount=104
I wanted just to make sure that Autorec can be or not a solution of his problem
jac10000 said:
You are root and the G3 boot normaly and run ?
If yes we can flash by dd commands kitkat aboot and kitkat , bump boot and custom recovery
---------- Post added at 21:50 ---------- Previous post was at 21:38 ----------
Ok if your G3 run normally
download LGG3-D855-OneClickRootRecoveryV1.1.zip here : http://forum.xda-developers.com/lg-g3/general/d855-one-click-root-twrp-recovery-t3072767/post59895642#post59895642
But instead of running the script, you apply the method by commands lines: http://forum.xda-developers.com/showpost.php?p=59931455&postcount=104
Aboot and laf are downgrade to kitkat, bump boot and custom recovery will also be installed
Make sure you are enable USB Debuging Mode
@bender_007 , here it's the kitkat boot witch was flashed, autorec don't work I think ?
Click to expand...
Click to collapse
Thank you very much ..
My phone is ok
pardodudu said:
Thank you very much ..
My phone is ok
Click to expand...
Click to collapse
Yeaaaaaaa!!! :good:
jac10000 said:
He have not recovery, flashable can't work. He can just apply commands line with adb like this I think : http://forum.xda-developers.com/showpost.php?p=59931455&postcount=104
I wanted just to make sure that Autorec can be or not a solution of his problem
Click to expand...
Click to collapse
I ment apk for him
bender_007 said:
I ment apk for him
Click to expand...
Click to collapse
Thanks bender_007 but he have apply my first first thought and his G3 is OK now
Excuse I for having disturbed you for nothing
look
pardodudu said:
Thank you very much ..
My phone is ok
Click to expand...
Click to collapse
No problem , finished.