Hello
My Note was purchased in Indonesia and I am using in Indonesia. It had worked very well with XSE ROM including updates.
the handset is N7100.
Later I had installed CM10.1, and other ROMs without any issues. Later when I install Stock ROM 4.1.2 from sammobile,
1. It doesn't connect to network - shows only emergency calls.
2. when I reinstall CM10.1 or BTU it works well
Is the issue of the Stock ROM I am downloading from sammobile / hotfile.com
or is there any other issue?
All I am looking is to revert to Stock with XSE CSC - any help is appreciated!
Thx
ramana
Check out this thread which probably has the information you need.
muppetmania said:
Check out this thread which probably has the information you need.
Click to expand...
Click to collapse
Yup! Thx for the pointer. here is what it says and my note 2 sinks in this truth!
--------------------------
1)All the custom ROMs based on ME6 or MF2 require the modems XXDME4 or DXDMF1. Or you won't get signal.
2)The kernel will modify the efs so that only XXDME4 and DXDMF1 modems can read it.
3)Once you boot up with the latest kernel, the efs will be modified, and you will need to stick to XXDME4 or DXDMF1 modems even after changing ROMs.
4)The modems XXDME4 and DXDMF1 are compatible with all the kernels (even 4.1.1)
5)Modems can't be changed if you are on a rom based on ME6/MF2
----------------------------------------------------------------
lihat IMEInya broo.....
apakah sudah sama imeinya dgn perangkatmu...*#06# call
Related
So I like to try the MiBox ROM for Sprint SGN2. No ROM for N7100. But if I d/l the ROM , flash , then flash a XXDME4 modem with RIL , will the handset run ?
I hear the two devices are identical, just the model number changes for the carrier and that the carrier loads their particular modem - so replacing the modem should make it work ?
thanks
You are free to try it out for yourself , But i would highly doubt it would turn on and even if it does you may get a crap ton of FC's. Make sure you have a nandroid backup first if you want to try it out.
Installed fine
No fc's
No signal!
Flashed midem and RIL
No signal
Restoring....
sent from my n7100 using xda tapatalk
n7100, uk o2, omega rom
So I like to try the MiBox ROM for Sprint SGN2. No ROM for N7100. But if I d/l the ROM , flash , then flash a XXDME4 modem with RIL , will the handset run ?
I hear the two devices are identical, just the model number changes for the carrier and that the carrier loads their particular modem - so replacing the modem should make it work ?
thanks
Hi all,
My Note 2 LTE (N7105) Updated OTA from my carrier (EE UK) when I got it last week, and is now on the DMF2 build/baseband.
However, I've heard that flashing a ROM over this will make the IMEI disappear (correct me if I'm wrong), as per Dr.Ketan's thread here
I really want to install some ROMs like CleanROM Ace or Jedi x17 ROM, however I'm worried that I will ruin my device I just got the other day
Any idea on what my options are?
Thanks in advance!
U read that wrong buddy..it says MF2 and ME6 are latest modem and it modifies efs so that only newer modems(me6,mf2,mg1) can read the partition.
If u DOWNGRADE or flash older modems(before mf2,me6) it will result in imei loss
So u can flash any rom with latest modems..continue flashing:thumbup:
Sent from my AweSoMe ?♥Note2♥?
Ever since I upgraded my ROM to 4.2.2 (US based) I am receiving WiFi Authentication Errors periodically, now I would like to go back to the stock ROM but can't find it anywhere. My original CSC was XAC, and checking the well known ROM sites - no one has a ROM for Canada.
Does anyone know which ROM I can safely revert to or where I can get N511XXBMC9 for XAC?
I look through Sammobile and found the Singapore version (XSP) with the same PDA, CSC and MODEM values, however I'm not sure it this will work.
Product Code: XSP
PDA: N5110XXBMC9
CSC: N5110OLBBMC9
MODEM: N5110XXBMC9
Thanks
splitslim said:
Ever since I upgraded my ROM to 4.2.2 (US based) I am receiving WiFi Authentication Errors periodically, now I would like to go back to the stock ROM but can't find it anywhere. My original CSC was XAC, and checking the well known ROM sites - no one has a ROM for Canada.
Does anyone know which ROM I can safely revert to or where I can get N511XXBMC9 for XAC?
I look through Sammobile and found the Singapore version (XSP) with the same PDA, CSC and MODEM values, however I'm not sure it this will work.
Product Code: XSP
PDA: N5110XXBMC9
CSC: N5110OLBBMC9
MODEM: N5110XXBMC9
Thanks
Click to expand...
Click to collapse
have you found the answer? were the issues really caused by US rom? Im still with stock BMC9/XAC maybe you can show me how to back it up and ill send you it? I also want to root and install 4.2.2
Just like the title says.
I have the n900w8 variant of the note 3 which works in canada and mexico. not sure about other countries. So I installed the hyperdrive rom that is for the n900t model.
It works awesome i had to flash some fixes now when i try to flash one of the s5 ports for the n900t or n9005 which both of them are compatible I get the unknown baseband and no imei issue. I hope someone in here can help me.
i have to mention that i made a nandroid backup and after the rom is flashed I flash the back up but only restoring Modem and Efs. still same issue.
SeerePetrova said:
Just like the title says.
I have the n900w8 variant of the note 3 which works in canada and mexico. not sure about other countries. So I installed the hyperdrive rom that is for the n900t model.
It works awesome i had to flash some fixes now when i try to flash one of the s5 ports for the n900t or n9005 which both of them are compatible I get the unknown baseband and no imei issue. I hope someone in here can help me.
i have to mention that i made a nandroid backup and after the rom is flashed I flash the back up but only restoring Modem and Efs. still same issue.
Click to expand...
Click to collapse
There's a few guys that can (or rather willing to) do bling builds. But the problem with blind builds is, you cannot test them. Not too many dev's from Canada. Sorry. As I get time, i will work with Allen on W9008 buids if there's enough people to warrant the time and effort.
re: baseband & imei
SeerePetrova said:
Just like the title says.
I have the n900w8 variant of the note 3 which works in canada and mexico. not sure about other countries. So I installed the hyperdrive rom that is for the n900t model.
It works awesome i had to flash some fixes now when i try to flash one of the s5 ports for the n900t or n9005 which both of them are compatible I get the unknown baseband and no imei issue. I hope someone in here can help me.
i have to mention that i made a nandroid backup and after the rom is flashed I flash the back up but only restoring Modem and Efs. still same issue.
Click to expand...
Click to collapse
The only way you can solve the imei and baseband
issue is to Odin flash the original STOCK firmware.
After Odin flashing you can root the phone
and flash a custom recovery if you like.
You can also flash a custom rom which was
created for your specific phone's model.
Then just be careful of what you flash in
the future.
You can find the original STOCK ODIN (TAR) firmware
at http://sammobile.com
Good luck!
working now
dragonstalker said:
There's a few guys that can (or rather willing to) do bling builds. But the problem with blind builds is, you cannot test them. Not too many dev's from Canada. Sorry. As I get time, i will work with Allen on W9008 buids if there's enough people to warrant the time and effort.
Click to expand...
Click to collapse
Thanks i got it to work... all i did was install the compulsion kernel after the fixes... and now is working as usual...
SeerePetrova said:
Thanks i got it to work... all i did was install the compulsion kernel after the fixes... and now is working as usual...
Click to expand...
Click to collapse
Hi there,
Mind helping me? I ended up having unknown Baseband and IMEI null during lollipop upgrade. I tried flashing back to original stock rom both kitkat and lollipop but I still got same issues. I ended up rooting the phone and currently running twrp. I'm just at lost right now on what else to do. I'm thinking of putting custom ROM but I"m not sure with one will work. I have SM-N900W8 Canadian version.