Hi there,
this might not be any news for most of you, however I struggled finding a way to get rid of the squeaky noise caused by the rubber coated cord.
so, FYI, excerpt
... Another way to reduce microphonics is the placement of earbuds. Most people face the cord downwards, so it’s pointing straight towards the ground. If you wrap the earbud cord upwards, around your ear and then let it point to the ground, the ear will absorb some of the microphonics (over the ear placement)...
from http://ear-buds.org/microphonics-and-how-it-affects-your-earbuds/
Sent from a pizza..
Helpful indeed, thanks for sharing.
Sent from my HTC_PN071
Related
So I just got back from a camping trip and I turned my phone on and the speaker sounds horrible. It sounds like it might be blown or have debris in it. My phone sat in my hot car all weekend so my two questions are
Did the heat mes up my speaker?
How can I clean debris out of the speaker?
I rarely use the speaker to listen to music so it seems pretty weird that it is blown. Any advice would be great!
Sent from my ADR6300 using XDA App
http://forum.xda-developers.com/showthread.php?t=1176861
the speaker has a mesh over it, its very unlikely they are debris on the driver. it is likely that the sealant used to hold the cone to the coil, or surround melted. theres no way to fix this short of replacing it. if it did indeed melt, things would sound muffled and muddy.
cvbcbcmv said:
replacing it isn't a big deal, read my thread. It's a 10 dollar quick, easy, and 5 minute process. The hardest part is undoing the screws on the back. Easy as pie. Way easier than it sounds, and it sounds easy. Don't worry about it, just replace it.
Click to expand...
Click to collapse
Hmm when people say its easy, you sometimes have to worry. It may be easy to you, but maybe he doesn't have the precision hand or nerves of steel it takes if you accidently poke a hole in something while your doing it. I have never taken my dinc apart, but if I did, I would be extremely careful. I followed an online tutorial on how to replace an ipod battery once and I mutilated that case. It never fit right after that... Just be careful, if you decide to do this and take your time, don't force stuff appart!
Hi everyone.
I accidentally dropped my phone as I was getting out of my car (damn that new coat with all it's pockets!).
Now I noticed that at full volume, the speaker is really hard to understand, and at about 1/3 volume it becomes clearer- but the person becomes harder to hear in terms of loudness.
At full volume it's as though the person on the other side is talking with their lips on the mic and really loudly.
Does anyone know if it's possible to replace the speaker, or what could have caused this? I am familiar with taking the phone apart. I've done it a number of times, but I'm just wondering if it even makes sense to try at this point.
thnx
EDIT: I found this.
http://www.repairsuniverse.com/htc-desire-z-earpiece-speaker-replacement.html
anyone install one of these? requires desoldering, I guess?
I dont think it requires anything really besides opening. I believe that when I swapped my spring the speaker is on the back side of the phone and the entire motherboard is seperate on front side.
thanks scott.
you're correct. no soldering. it has two spring-bent type contacts and it looks like there is a metal bracket around the speaker that has 4 indentations to hold the speaker down over 4 small cavities in the speaker body.
should be easy.
and i found it for 2 bucks to boot!
Yea, replacing the speaker is very easy. First take off the back (4 screws) and then I think there is one more screw to get the speaker loose. But I don't remember exactly. Might be none.
Has anyone successfully taken apart the headphones that come with the m8? I have got a bit of wax in the "grill" bit, if I can take them apart I can fix them, if not. I guess I have to go back to my earbuds :/
Thanks
So it turns out its a pretty easy fix. If one of your earphones is a bit quieter than the other, it could be because you have got wax in the "grill" or "net" or whatever the technical term is, but basically I just took it off CAREFULLY as I didn't want to pierce is using a safety pin, and then just rinsed it under a tap for a few minutes, chucked it back on the earphone, left it to dry and wollah! I now have two evenly sounding earphones might try it with the right one to just give it a clean
It's not "and wollah", it's "et voilà". Perhaps your ear wax prevents you from hearing that correctly [emoji12]
A small issue thats bugging me is that the top speaker grill gets easily clogged up when using the phone. as they are so small to even clean correctly and already mines looking horrible and dirty but no way to get into the grills to pick it clean or blow it out.
a fine needed however slow and sometimes painful as the needle needs to be so small you end up hurting your thumb.
tape over the grill doesnt seem to be collecting it
ive read compressed air may not work if it cant blow it up due to the size.
The only thing i can think of would be something like cyber clean putty so has anyone got some and does it work?
iStasis said:
A small issue thats bugging me is that the top speaker grill gets easily clogged up when using the phone. as they are so small to even clean correctly and already mines looking horrible and dirty but no way to get into the grills to pick it clean or blow it out.
a fine needed however slow and sometimes painful as the needle needs to be so small you end up hurting your thumb.
tape over the grill doesnt seem to be collecting it
ive read compressed air may not work if it cant blow it up due to the size.
The only thing i can think of would be something like cyber clean putty so has anyone got some and does it work?
Click to expand...
Click to collapse
Worth trying a Dyson vacuum or the likes
I have a normal Dyson but and tried it but doesnt seem strong enough to get it out the gril. hair products probally didnt help the grill
I have an Axon 7 and I heard using a clean toothbrush to clean the speakers helps. Maybe the same can be done on the Razer phone
I have used a strong magnet to get metal and a kneaded eraser to get some of the rest. I would not use compressed air, blowing into the speakers may ruin it.
Flicking the holes with a needle a few times and then a very soft tooth brush has worked good enough nice to have a pair of awesome speakers again
Try getting a small bristles paint brush guys, I've had front firing speakers on phones since the HTC One M7 and it works so well
Covlinuxguy said:
Try getting a small bristles paint brush guys, I've had front firing speakers on phones since the HTC One M7 and it works so well
Click to expand...
Click to collapse
Thanks for the tip, got it looking a lot cleaner now with a normal tooth brush but had to apply a little more pressure and cover screen just to prevent any damage
Another method i found useful is using those sticky gel to pick up the dirt, works for me, call Gulu cleaner gel, pick them up from amazon real cheapie
How do you prevent it from happening in the first place
How do you prevent it from happening in the first place
Slowly, day by day, incall volume decreased.
I compared mi mi6 with a newer one, a friend's MI6, and I found out that my top speaker grid is completely clogged with dust and dirt... I tried to clean that with a needle and a vacoon, it worked, but after some hours the volume decreased another time...
How about you? Are you facing a similar problem? How you solved? Or how would you solve?
P.s.: Top speaker also have very little holes, is pretty difficult to clean.
use old toothbrush to clean the grill
face the grill downside so that the dust come out
wahaj0892 said:
use old toothbrush to clean the grill
face the grill downside so that the dust come out
Click to expand...
Click to collapse
That happened to you too? I'm going to try
Mi6 is almost water resistang BUT NOT THE USB PORT
So basically you can clean it with water or alcohol. Be careful with pointy objects.
pi4a7a said:
Mi6 is almost water resistang BUT NOT THE USB PORT
So basically you can clean it with water or alcohol. Be careful with pointy objects.
Click to expand...
Click to collapse
I don't really suggest any liquids other than ones made specifically for electronics. Alcohol is a good one or some water with its charge removed (forgot the name). The Mi 6 has no water resistance rating. They just say it has some sealing against water so take the advice with a pinch of salt. Sony made all their phones "water resistant" and later recalled the claims :/
I cleaned some small fibers from my ear speaker using bluetac gently pressed against it. GENTLY!!!
You can clean the bottom speaker with a pin gently around the very outer part.
Don't put the pin actually inside or it will get damaged. Just the outside parts.
Its not too bad to clean luckily. Not ideal that there are places for dirt to build up but many phones have this issue
Hello friends:
In the same way, over time the volume was decreasing until reaching the point of not listening to anything!
the problem is the blessed speaker, it seems to be clogged with dirt or I really do not know what happens.
I cleaned it with a contact cleaner for electric circuits and then with a suction vacuum for the outside ... and I really improved a lot, but I do not stay 100% as when I was new, a pity I am disappointed by this Mi6, apparently they are equipment with failures factory.
regards,
JC
Hi, with a toothbrush and contact cleaner (electronic) on the speaker call, with circular movements I cleaned it and now if it sounds much better, I can say 100%, I noticed when I cleaned the speaker, there were some white particles, I guess that had saturated, obstructed in its entirety the output of the sound, even until the stereo mode is better heard in that front speaker .. greetings and luck!
JC