I'm having trouble running AOKP on my phone. After wiping and flashing the ROM then Gapps the phone continues to reboot. Is there anything else that should be done?
Make sure you wipe all caches ams ext partition. Also male sure that you used the correct gapps. I know if you use the wrong gapps it will bootloop.
Are you s-off or just htc-dev unlocked?
Sent from my daughter's CLONED Og Evo using xda-developers app
edfernandez2 said:
I'm having trouble running AOKP on my phone. After wiping and flashing the ROM then Gapps the phone continues to reboot. Is there anything else that should be done?
Click to expand...
Click to collapse
Heres the correct GApps..... http://goo.im/gapps/gapps-jb-20130301-signed.zip
Diablo67 said:
Heres the correct GApps..... http://goo.im/gapps/gapps-jb-20130301-signed.zip
Click to expand...
Click to collapse
I'm s-off, that was the g-apps that I used on the phone.
edfernandez2 said:
I'm s-off, that was the g-apps that I used on the phone.
Click to expand...
Click to collapse
Did you install a different kernel?
Diablo67 said:
Did you install a different kernel?
Click to expand...
Click to collapse
I didn't change the kernel. In the first reply it mentions "ams ext"- did you mean to wipe external partition? Do I need to do any special formatting of the SDcard before flashing the ROM?
edfernandez2 said:
I didn't change the kernel. In the first reply it mentions "ams ext"- did you mean to wipe external partition? Do I need to do any special formatting of the SDcard before flashing the ROM?
Click to expand...
Click to collapse
You will need an ext4 partition for the a2sd and it will need to be a clean flash too cause I'm on it now and I dirty flashed into no WiFi. So partition sdcard and clean flash.
_thrasher_x said:
You will need an ext4 partition for the a2sd and it will need to be a clean flash too cause I'm on it now and I dirty flashed into no WiFi. So partition sdcard and clean flash.
Click to expand...
Click to collapse
Thank you, is there a link with instructions available on how to properly format the SDcard?
edfernandez2 said:
Thank you, is there a link with instructions available on how to properly format the SDcard?
Click to expand...
Click to collapse
http://androidforums.com/evo-4g-all...ooting-dummies-guide-gingerbread-edition.html
_thrasher_x said:
http://androidforums.com/evo-4g-all...ooting-dummies-guide-gingerbread-edition.html
Click to expand...
Click to collapse
Thank you very much for providing that link. Would you recommend to follow the partitioning scheme in that link or use different partition sizes? Should the remaining partition stay at Ext3 or updated to Ext4?
edfernandez2 said:
Thank you very much for providing that link. Would you recommend to follow the partitioning scheme in that link or use different partition sizes? Should the remaining partition stay at Ext3 or updated to Ext4?
Click to expand...
Click to collapse
I'd use 0 swap, 1048 ext and remainder fat. Afterward upgrade to 3 then upgrade to 4 yes.
Sent from my PC36100 using Tapatalk 2
Related
I have a problem with InsertCoin A2SD+ 1.0.8. After flashing everything seems OK but it shows me Desire's default wallpaper and then.. nothing. Nothing happens. Can't see the buttons etc only wallpaper and top status bar. I flashed it 2 times already and still nothing. Of course I wiped all data/cache.
This may have something to do with S-OFF?
SD Card
2.5 GB FAT32
1 GB EXT3
~100 MB EXT3
~100 MB SWAP
Your SD card partitions are not appropriate. You need two partitions: fat32 for you stuff and 1gb ext2/3/4 for apps, both primary. Nothing more, like third partition or swap.
Right after I wrote first post I changed partitions on SD card to ~2.80 GB FAT223 and 1GB EXT4 both primary, wiping, flashing and STILL ALL THE SAME
Hm.. Then?
- Do you have the correct hboot?
- Did you wipe Dalvik as well?
- Maybe a corrupt download?
I'm out of ideas.
- Do you have the correct hboot?
Click to expand...
Click to collapse
0.93, S-ON, S-OFF is required?
- Did you wipe Dalvik as well?
Click to expand...
Click to collapse
Yep, with ROM manager
- Maybe a corrupt download?
Click to expand...
Click to collapse
Nope, I downloaded it 2 times.
I wouldn't use ROM manager for things like this. Try wiping/flashing manually, in recovery. ROM manager likes to cause problems to users.
Try wiping/flashing manually, in recovery.
Click to expand...
Click to collapse
I've been trying - 2 times. Only one time I tried ROM manager.
Serpher said:
I've been trying - 2 times. Only one time I tried ROM manager.
Click to expand...
Click to collapse
Rom manager is a really bad software. Better use gparted.
are you following correct order for partition??
1st fat 32
2nd ext 3/4
if you have windows then try partitioning with some software like easus partition manager..also order is very important
also see to it tht you are downloading the rom for stock hboot..the rom is available for stock hboot and cm7 hboot
Sent from my HTC Desire using Tapatalk
MatDrOiD said:
Rom manager is a really bad software. Better use gparted.
Click to expand...
Click to collapse
Im using MiniTool Partition Wizard
lordvoldemort said:
are you following correct order for partition??
1st fat 32
2nd ext 3/4
if you have windows then try partitioning with some software like easus partition manager..also order is very important
Click to expand...
Click to collapse
Yes, my order was from very start FAT32 as 1st and EXT3 2nd partition.
lordvoldemort said:
also see to it tht you are downloading the rom for stock hboot..the rom is available for stock hboot and cm7 hboot
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
I used InsertCoin Sense 2.1 1.0.8 A2SD
Do you use the recoomended radio? 5.17.05.23?
You can download from here.
This one is recommended.
I remember my friend flashed this rom with and older radio and he got bootlops/hangs - flashed the latest one and it worked.
sorry guys can't make mods for a long time anymore my phone won''t boot into CM7 i dont know why sorry for this!
greetings safariking
what happened? bricked?
voetbalremco said:
what happened? bricked?
Click to expand...
Click to collapse
i don't know can boot into my old mods but if i want to install normal CM7 than stuck on bootscreen en have done full whipe en evrything
what if you go back to stock, wipe EVERYTHING, also SD, and format system etc so its a really FULL wipe, and then try to flash cm7 again..?
voetbalremco said:
what if you go back to stock, wipe EVERYTHING, also SD, and format system etc so its a really FULL wipe, and then try to flash cm7 again..?
Click to expand...
Click to collapse
i will try it android 2.3.5 downloading now than flashing en than formatting the sytem and installing cm7 again i hope it will work
also backup a stock rom, when its clean installed, and save backup on your pc, so you always have a clean backup of a stock rom, then flash cm7
voetbalremco said:
also backup a stock rom, when its clean installed, and save backup on your pc, so you always have a clean backup of a stock rom, then flash cm7
Click to expand...
Click to collapse
stock rom needs to be in ext4
Sent from my GT-S5830 using xda premium
spacecaker said:
stock rom needs to be in ext4
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Yeah but if you flash back to Stock Rom using Odin your filesystem is back to RFS
Not necessarily, the /data and /cache partitions aren't touched by Odin.
Darkshado said:
Not necessarily, the /data and /cache partitions aren't touched by Odin.
Click to expand...
Click to collapse
Ohhhhhhhh
I would Click Thanks but:
Sorry, you are limited to 8 thanks per day
Click to expand...
Click to collapse
The solution to that is to format within recovery mode. If that doesn't work, dd RFS-formatted empty /data and /cache back into place. Let me know if someone needs those.
Did anyone manage to configure a2sd on the latest CM7 by phiexz? My Gio goes in infinite boot loop. Any suggestion besides s2e?
20120325?
Thats from March the 25th.
Latest version is 20120518.
Why don't you use S2E? I used to use a2sd, but after trying S2E I preferred it.
huh? is there any update last may 18? the latest is last april 26.
---------- Post added at 02:13 AM ---------- Previous post was at 02:03 AM ----------
oh, my bad. i found what you're talkin about. you're right haha.
emesex said:
Did anyone manage to configure a2sd on the latest CM7 by phiexz? My Gio goes in infinite boot loop. Any suggestion besides s2e?
Click to expand...
Click to collapse
check your ext partition type in PC it should be of ext4 type. If not just format it with the partition mini tool. Amd try a2sd it work without any problems
Sent from my GT-S5660 using xda premium
waqasleo17 said:
check your ext partition type in PC it should be of ext4 type. If not just format it with the partition mini tool. Amd try a2sd it work without any problems
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
There is a problem with a2sd in new release. This method won't work. Only S2E is working.
waqasleo17 said:
check your ext partition type in PC it should be of ext4 type. If not just format it with the partition mini tool. Amd try a2sd it work without any problems
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
Nope, my partition is ext4 and before installing I've done a wipe of everything.
emesex said:
Nope, my partition is ext4 and before installing I've done a wipe of everything.
Click to expand...
Click to collapse
doing a factory reset changes the partition type. Its a bug in the phiex recovery.
S2E is not working for me after installing my backup is restarted when installing applications.
bill_kevin said:
S2E is not working for me after installing my backup is restarted when installing applications.
Click to expand...
Click to collapse
This is S2E bug. Try this;
Disable S2E.
Format your sd-card through pc using any software like MiniTool Partition, etc.
Then re-enable S2E. This should resolve the issue with S2E.
waqasleo17 said:
doing a factory reset changes the partition type. Its a bug in the phiex recovery.
Click to expand...
Click to collapse
So are You saying it is a px-recovery problem? Then, I'm gonna try to use cwm-recovery and I'll let you know if the problem is solved.
Inviato dal mio GT-S5660 con Tapatalk 2
Help!
Opinions???
SensuAOSP ROM vs. Shooter for the EVO 4G?
SensuAOSP
http://forum.xda-developers.com/show...ight=sensuaosp
Shooter
http://forum.xda-developers.com/show...hlight=shooter
Shooter seems like a quick install with an amazing build!
whereas SensuAOSP ROM (amazing build as well) has:
1. Wipe everything except your SDcard 3x
2. Partition your SD card to 1024, 0 swap
3. Upgrade ext2 to ext3
4. Upgrade ext3 to ext4
5. Flash the ROM
6. Wipe cache and dalvik-cache
7. Reboot
8. Dont touch your phone for at least 15 minutes
Also, if anyone can direct me to how to perform steps 1-4 or elaborate - would rock!
RAPTORZE
Raptorze said:
Help!
Opinions???
SensuAOSP ROM vs. Shooter for the EVO 4G?
SensuAOSP
http://forum.xda-developers.com/show...ight=sensuaosp
Shooter
http://forum.xda-developers.com/show...hlight=shooter
Shooter seems like a quick install with an amazing build!
whereas SensuAOSP ROM (amazing build as well) has:
1. Wipe everything except your SDcard 3x
2. Partition your SD card to 1024, 0 swap
3. Upgrade ext2 to ext3
4. Upgrade ext3 to ext4
5. Flash the ROM
6. Wipe cache and dalvik-cache
7. Reboot
8. Dont touch your phone for at least 15 minutes
Also, if anyone can direct me to how to perform steps 1-4 or elaborate - would rock!
RAPTORZE
Click to expand...
Click to collapse
Do you already have a partitioned sd-card?
SensuAOSP will NOT boot unless you have a partitioned SDcard.
SensuAOSP is an AOSP build (2.3.7) whereas GWs Shooter is sense 3.0.
Robobob1221 said:
Do you already have a partitioned sd-card?
Click to expand...
Click to collapse
I have a rooted - full access --
phone -- I never partitioned anything when first installing CM7 - just wiped everything, cleared cache, etc...
It seems like the steps 1-4 are easy ? just a few button clicks?
I'm using clockworkmod...
Raptorze said:
I have a rooted - full access --
phone -- I never partitioned anything when first installing CM7 - just wiped everything, cleared cache, etc...
It seems like the steps 1-4 are easy ? just a few button clicks?
I'm using clockworkmod...
Click to expand...
Click to collapse
If you want to run my ROM, parition your SD and get rid of your crappy recovery and go with smelkusMOD.
Then it'll be easy. :good:
MBQsniper said:
If you want to run my ROM, parition your SD and get rid of your crappy recovery and go with smelkusMOD.
Then it'll be easy. :good:
Click to expand...
Click to collapse
I know I'm acting like noob - AH! but I'm really not that sucky at this - sorry man!
Definitely want to install it correctly!
I've just never done the whole...
set partition to 1024
ext2-3
ext3-4
etc...
Any elaboration on the steps?? and DEFINITELY : where to get smelkusMOD ??
a little begging for some assistance!
RAPTORZE
Raptorze said:
I know I'm acting like noob - AH! but I'm really not that sucky at this - sorry man!
Definitely want to install it correctly!
I've just never done the whole...
set partition to 1024
ext2-3
ext3-4
etc...
Any elaboration on the steps?? and DEFINITELY : where to get smelkusMOD ??
a little begging for some assistance!
RAPTORZE
Click to expand...
Click to collapse
You'll find it a few pages back in the dev section
In the recovery, youll see an option to partition your sd card, hit it, set swap to 0, and set the SDext size to 1024.. when it finishes, youll see an option to upgrade ext2 to ext3, do that, then select the option upgrade ext3 to ext4.
PARTITIONG YOUR SD WILL DELETE EVERYTHING OFF OF YOUR SDCARD
Do you have any more questions? Also, never apologize. I'm here to help.
MBQsniper said:
You'll find it a few pages back in the dev section
In the recovery, youll see an option to partition your sd card, hit it, set swap to 0, and set the SDext size to 1024.. when it finishes, youll see an option to upgrade ext2 to ext3, do that, then select the option upgrade ext3 to ext4.
PARTITIONG YOUR SD WILL DELETE EVERYTHING OFF OF YOUR SDCARD
Do you have any more questions? Also, never apologize. I'm here to help.
Click to expand...
Click to collapse
Ok -- got it! and YES : where and which version of Smelkus do i install first?
http://goo.im/devs/smelkus
thanks
RAPTORZE
Raptorze said:
Ok -- got it! and YES : where and which version of Smelkus do i install first?
http://goo.im/devs/smelkus
thanks
RAPTORZE
Click to expand...
Click to collapse
Download whichever one, make sure it is smelkusMOD 4.3, and download the one ending with .zip, rename it to PC36IMG, and put it on the root of your SD, boot into the bootloader, and select yes when it asks to update, dont restart the system, then boot into recovery from hboot.
(I wont be replying for another hour or two)
Raptorze said:
Ok -- got it! and YES : where and which version of Smelkus do i install first?
http://goo.im/devs/smelkus
thanks
RAPTORZE
Click to expand...
Click to collapse
They are all the same. Only themed differently.
stuck - says "Parsing PC36IMG.zip" forever?
Evilone69tmg said:
They are all the same. Only themed differently.
Click to expand...
Click to collapse
stuck - says "Parsing PC36IMG.zip" forever?
darn my luck.
R
Raptorze said:
stuck - says "Parsing PC36IMG.zip" forever?
darn my luck.
R
Click to expand...
Click to collapse
Make sure you didn't rename it PC36IMG.zip.zip that might be why.
Sent by an enviousOG
Robobob1221 said:
Make sure you didn't rename it PC36IMG.zip.zip that might be why.
Sent by an enviousOG
Click to expand...
Click to collapse
^ Yep. Make sure the file says: PC36IMG.zip
SensuAosp Help
Hi,
I rooted & flashed SensuAosp last night...I love it . Thanks for the clear instructions (definitely one of the easier ones ) So its running. But I have one issue. I've searched Google'd and even read through over 156 pages of forum q&a tips tricks etc..
So my problem is that some of the apps (Facebook, Slice It, etc) won't open (error msg & force closes) .
Went to Google play (figured maybe they needed updating) its stuck on downloading but doesn't download ( using WiFi).
I cleared cache, uninstalled play update, cleared service framework, even cleared media storage, & reboot several times.
None of them worked.
My mobile service SPRINT is intentionally disconnected I have an abundance of wifi. Why is this not working?
Here are my specs:
PC36100
Droid Version : 2.3.7
Baseband: 2.15.00.19
Kernel V: [email protected]#1
CPU info :ARM v7Processor rev 2(v71)
Men info: 194MB/414MB
Mod version: SENSUAOSP 2.3
Build Date: Monday/1-21-13
Build Number: Gingerbread
Did you try fixing permissions?
Sent from my PC36100 using xda app-developers app
CyanJustice said:
Did you try fixing permissions?
Sent from my PC36100 using xda app-developers app
Click to expand...
Click to collapse
How can I go about that or is there a link? Everything I've seen on these forum's say to fix permissions but no one goes in detail..
Thank you soo much for responding :fingers-crossed:
RubyLouise said:
How can I go about that or is there a link? Everything I've seen on these forum's say to fix permissions but no one goes in detail..
Thank you soo much for responding :fingers-crossed:
Click to expand...
Click to collapse
What recovery are you using? If you're using amon ra v. 2.3 it's under the other menu, and called fix uid mismatches. If your using smelkusmod, it's under the other menu, and called fix permissions. If your using clockworkmod it's called fix permissions
Sent from my PC36100 using Xparent ICS Tapatalk 2
CRIME INC. said:
What recovery are you using?
Sent from my PC36100 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
AmonRa
RubyLouise said:
AmonRa
Click to expand...
Click to collapse
Then under you recovery menu, click on other, and then fix uid mismatches
Sent from my PC36100 using Xparent ICS Tapatalk 2
Tried to fix Permissions to no avail ...
CRIME INC. said:
Then under you recovery menu, click on other, and then fix uid mismatches
Sent from my PC36100 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
Hey, I tried it...even did it three times just in case and still a no go. I even rebooted cleared devlik cache etc. three times also... I'm stuck ... I loooovvveee my new ROM...
P.s. I think SPRINT put a hex on my phone since I'm temporarily boycotting their retarded service ...
H....E...L...P!!!!! *le sigh
Hi, I have a problem where the phone only allows me to install about four 3-4mb apps before is says 'storage space is running low'. This has been the case for a long time over many roms.
Tried with and without an 1gb ext4 partition on a 16gb and 32gb memory card. Roms tried include most ICS, JB 4.1 and JB 4.2. Have also tried with a2sd and without. Result: no changes.
Am currently on Nikez's 4.2 roms.
I hope there is a solution...
Thanks
Did ya activate a2sd via terminal emulator?
a2sd install (grant superuser perm)
Then answer....
y
n
y
Thanks for reply. :good:
Yes, but it didn't make any difference.
RiThBo said:
Thanks for reply. :good:
Yes, but it didn't make any difference.
Click to expand...
Click to collapse
A2sd works fine on nikez, what did you partition you're sdcard with?
Sent from my HTC Desire using xda app-developers app
sywats said:
A2sd works fine on nikez, what did you partition you're sdcard with?
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
Using 4ext recovery. But shouldn't I be able to install more than 4 apps without a2sd?
RiThBo said:
Using 4ext recovery. But shouldn't I be able to install more than 4 apps without a2sd?
Click to expand...
Click to collapse
How much space do you have before activating a2sd? What hboot are you using
Sent from my HTC Desire using xda app-developers app
sywats said:
How much space do you have before activating a2sd? What hboot are you using
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
About 100mb - but it gets 'used up' with about 20mb. I am s-off, stock hboot. Is there a way to completely return it to factory settings so i can start over again. Factory resetting doesnt help the problem, nor does swapping sd cards
RiThBo said:
About 100mb - but it gets 'used up' with about 20mb. I am s-off, stock hboot. Is there a way to completely return it to factory settings so i can start over again. Factory resetting doesnt help the problem, nor does swapping sd cards
Click to expand...
Click to collapse
Exactly after flashing the rom, flash this:
http://db.tt/m4sQLDOI
It should get you a lot more space by also moving dalvik cache to sd-ext (no need for terminal commands anymore)
abaaaabbbb63 said:
Exactly after flashing the rom, flash this:
http://db.tt/m4sQLDOI
It should get you a lot more space by also moving dalvik cache to sd-ext (no need for terminal commands anymore)
Click to expand...
Click to collapse
My sd card is currently not partitioned, and i don't really want to re partition it. Is there any way to fix this without partitioning sd card. I have previously tried a similar file to the one you posted, and it allowed more apps to be installed but still not as many as was used to
Edit: Having seen your sig, i read the how to partition guide, and I used the 4ext recovery method. Is it possible to remove and then recreate a partition from that recovery?
RiThBo said:
My sd card is currently not partitioned, and i don't really want to re partition it. Is there any way to fix this without partitioning sd card. I have previously tried a similar file to the one you posted, and it allowed more apps to be installed but still not as many as was used to
Edit: Having seen your sig, i read the how to partition guide, and I used the 4ext recovery method. Is it possible to remove and then recreate a partition from that recovery?
Click to expand...
Click to collapse
Yes, it is possible. Partition away.
Ok, I will try that later on - I don't have time now. Thanks for your help