Related
Hi. I have a problem with Touch Pro 2. There is stock rom, never updated. But system is behaving very bad. Even touch works only when it wants (maybe physical damage, but I want to have new WM). But installation stops at 1% and phone reboots. Problem is that I have set a password on WM. There is a problem with touch in menu, so I can't remove it. May that be the problem that this secure makes flashing even stock roms impossible? I have no free SD, so only flash via RUU.
kubekpop said:
Hi. I have a problem with Touch Pro 2. There is stock rom, never updated. But system is behaving very bad. Even touch works only when it wants (maybe physical damage, but I want to have new WM). But installation stops at 1% and phone reboots. Problem is that I have set a password on WM. There is a problem with touch in menu, so I can't remove it. May that be the problem that this secure makes flashing even stock roms impossible? I have no free SD, so only flash via RUU.
Click to expand...
Click to collapse
Have you tried a hard reset? I believe it's called "Clear Storage" from settings.
Or hold talk/send + power + vol down while the device is OFF.
I can't clear storage because touch is broken in menu. That's why I want to reinstall it.
kubekpop said:
I can't clear storage because touch is broken in menu. That's why I want to reinstall it.
Click to expand...
Click to collapse
Then do my other suggestion...
But it doesn't work. It boots into bootloader. Does it work for you?
kubekpop said:
But it doesn't work. It boots into bootloader. Does it work for you?
Click to expand...
Click to collapse
Perhaps those weren't the right keypresses...
Try this:
A Hard Reset restores the device to its default settings — the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on the device will be lost. Only Windows Mobile software and other pre-installed programs will remain.
There are 2 ways to perform a Hard Reset on this device:
Menu Path
Access the Settings Tab>All Settings>System>Clear Storage
Follow the onscreen instructions.
Keystroke Method
1. With the device turned off, press and hold the VOLUME DOWN, TALK/SEND, and END/POWER buttons until you see this message on the screen.
2. This operation will delete all your personal data, and reset all settings to manufacturer default. Press Vol Up to restore manufacturer default, or press other keys to cancel.
3. Release the VOLUME DOWN, TALK/SEND, and END/POWER buttons.
4. Press the VOLUME UP button to restore the operating system to the factory default configuration, press the VOLUME DOWN button to restore the factory default configuration and remove any operator customization, or press any other button to cancel the reset.
Click to expand...
Click to collapse
Ok, I will try this when I will heve access to it It's my friend's phone, I wanted to help. GR8 THX, I hope it will help.
So the problem is when i go into certain apps and then
A) Press sleep
B) Quit (by pressing back button)
The soft-key/button backlight on Samsung Gio stays on BUT the screen will go off if i press sleep.
-The button-backlight DOES NOT turn of even when its been in sleep mode foor an hour
Any help will be Appreciated
THANK YOU
Solution!
Rooted devices and install GioKlight app, or open "/sys/class/leds/button-backlight/brightness" file on text editor and replace "255" to "0" for advanced user
Do you use stock rom?
Or a custom rom?
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Since many requests to port it to N8000, here it is finally released
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
I would appreciate a screen shot from your device, mainly under GUI options or custom backup menu where you select partitions
To take a screen shot, just slide left
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download links
Last version can be found here:
n8000
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
n8010
http://d-h.st/users/philz_touch/?fld_id=17913#files
n8013
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
n8020
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
Click to expand...
Click to collapse
Phil3759 said:
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
Since many requests to port it to N8000, here it is the first release, untested by me
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
I would appreciate a screen shot from your device, mainly under GUI options or custom backup menu where you select partitions
To take a screen shot, just slide left
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download: Flash at your own risk, this is a first release, untested
http://www.mediafire.com/file/458qik1k72tczg1/philz_touch_4.90.8-n8000.tar.md5
http://www.mediafire.com/file/mc71ezq8eg6oqo8/philz_touch_4.90.8-p5100.zip
Click to expand...
Click to collapse
I use your recovery on my Note 2 so very excited to see it here.Only problem is i have the N8010.Is this recovery only for the N8000 or can it be flashed on all variants?
Is this compatible with all ROMs? Aosp, CM!?
Re: [N8000][CWM Advanced Edition] PhilZ Touch
iRoNX said:
Is this compatible with all ROMs? Aosp, CM!?
Click to expand...
Click to collapse
Yes
ttav said:
I use your recovery on my Note 2 so very excited to see it here.Only problem is i have the N8010.Is this recovery only for the N8000 or can it be flashed on all variants?
Click to expand...
Click to collapse
Probably yes
Sent from my GT-I9100 using Tapatalk 2
Phil3759 said:
Yes
Probably yes
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I had a hang up on the Note 10.1 splash screen trying to enter recovery after flashing the zip file but no problems after flashing the tar file with mobile odin.
I`m going out soon so haven`t been able to test it much.
Initally it isn`t working very well.The touch screen interface is very erratic.Pretty much unusable so have to use the power up/down button to navigate.
Once i get home i`ll try changing some of theGUI settings to see if that helps.
Thanks for porting the recovery over here and i`m sure the glitches will be sorted out soon.
I see in Post #1 the .zip file is for the P5100 (Galaxy Tab 10.1). Any ideas where I can find the .zip version for the Galaxy Note 10.1 (N8000)? Thanks
robmeik said:
I see in Post #1 the .zip file is for the P5100 (Galaxy Tab 10.1). Any ideas where I can find the .zip version for the Galaxy Note 10.1 (N8000)? Thanks
Click to expand...
Click to collapse
Well spotted mate.I had my sleepy eyes on this morning and flashed it with predictable results
The tar file flashes fine with mobile odin.Why don`t you try it?
Sorry, fixed the zip version, now it is the one for N8000
About touch behavior:
1- when you touch a menu to select: is the selection precise and working as expected
2- bottom virtual buttons: do they work as expected?
3- If it is slow, try to reduce the Scroll Sensitivity setting and reduce menu height. Play with both to find a sweet point¨
Try to describe what happens with precision. A video would even be better, so that I can get what you mean. I won't be able to help much as I do not have the device, without these
Phil3759 said:
Sorry, fixed the zip version, now it is the one for N8000
About touch behavior:
1- when you touch a menu to select: is the selection precise and working as expected
2- bottom virtual buttons: do they work as expected?
3- If it is slow, try to reduce the Scroll Sensitivity setting and reduce menu height. Play with both to find a sweet point¨
Try to describe what happens with precision. A video would even be better, so that I can get what you mean. I won't be able to help much as I do not have the device, without these
Click to expand...
Click to collapse
1-no. For example i touch Backup and restore and the highlight changes to Install zip from SDcard. Go back picks another option or is unresponsive.
2-Totally unresponsive. (Edit:The back button works.)
3-Haven`t tried this as it is very difficult to navigate anywhere.
Maybe a N8000 user could post some findings as i`m on a N8010.
Thank you (out of my 8 daily :good
Ok, maybe it is a kernel issue in fact, as the kernel is stock N8100, but wired anyway
Post the recovery.img from N8010XXUCMA8 and I will look at it
Re: [N8000][CWM Advanced Edition] PhilZ Touch
Phil3759 said:
Thank you (out of my 8 daily :good
Ok, maybe it is a kernel issue in fact, as the kernel is stock N8100, but wired anyway
Post the recovery.img from N8010XXUCMA8 and I will look at it
Click to expand...
Click to collapse
i use n8000 and touch is also unresponsive.. when i touch the screen its always 'scroll down' .. when i touch bottom keys its always 'select'.. changed touch gui and also disabled it but still the same... so have to use volume rocker..
but so far all options i ticked works fine (backup., wipe., flash theme/mod)..
Sent from my GT-N8000 using Tapatalk HD
nadmaj said:
i use n8000 and touch is also unresponsive.. when i touch the screen its always 'scroll down' .. when i touch bottom keys its always 'select'.. changed touch gui and also disabled it but still the same... so have to use volume rocker..
but so far all options i ticked works fine (backup., wipe., flash theme/mod)..
Sent from my GT-N8000 using Tapatalk HD
Click to expand...
Click to collapse
Ah, bad news
So, the kernel swap won't fix it
Can you try to hide bottom virtual buttons in GUI settings and let me know if it fixes anything?
Also, Stock CWM Touch does work for N8000?
Ok,
Here is another repack:
Deleted
If touch doesn't work, try also to hide bottom virtual buttons in the GUI Settings
This version is is same recovery but repacked with original cm-10.1 ramdisk and kernel for N8xxx devices
Maybe the touch code issues are related to differences between stock and cm-10.1 kernels!
The adverse effects are:
- no exfat support
- aroma file manager could not work
Take it as a debug version just to rule out kernel from the touch issue
Phil3759 said:
Ok,
Here is another repack:
http://www.mediafire.com/file/asb9dfdem9tiw50/philz_touch_4.90.8-n8000-cm10.1.tar.md5
If touch doesn't work, try also to hide bottom virtual buttons in the GUI Settings
This version is is same recovery but repacked with original cm-10.1 ramdisk and kernel for N8xxx devices
Maybe the touch code issues are related to differences between stock and cm-10.1 kernels!
The adverse effects are:
- no exfat support
- aroma file manager could not work
Take it as a debug version just to rule out kernel from the touch issue
Click to expand...
Click to collapse
Flashed the latest repack and it made no difference.
Just flashed on 8010 and echo what ttav said scrolling up and down results in it flying up and down menu.
Turned off the virtual buttons and no diff at all.
Re: [N8000][CWM Advanced Edition] PhilZ Touch
Figured it out. Probably key setup. It will be fixed. Meanwhile stick to version in post 1 and use hardware keys
Sent from my GT-I9100 using Tapatalk 2
Let's do it the hard way:
I changed the Key up / down mapping, but from the video I saw on P3100 thread and your description, not sure it would be enough. So, this a debug version only:
http://www.mediafire.com/file/l970z1wgn9ncpsv/philz_touch_4.90.8-n8000-debug-touch.zip
On each touch, it will print a lot of info about screen touch events
Please do exactly the following, do not touch screen other than below instructions, until you are done with log file
1- Boot into recovery, do not touch screen at all
2- Touch and lift finger on top left corner
3- Touch and lif on top right
4- Touch and lift on bottom left
5- Touch and lift on bottom right
6- Touch and lift on a menu
7- Touch and lift on a second menu
For steps 6 and 7, describe what happens
Now, using hardware keys vol up/down, navigate to Advanced / Error Reporting
Attach here the /sdcard/clockworkmod/recovery.log file you get
This will help me spot the issue
Re: [N8000][CWM Advanced Edition] PhilZ Touch
Phil3759 said:
Let's do it the hard way:
I changed the Key up / down mapping, but from the video I saw on P3100 thread and your description, not sure it would be enough. So, this a debug version only:
http://www.mediafire.com/file/l970z1wgn9ncpsv/philz_touch_4.90.8-n8000-debug-touch.zip
On each touch, it will print a lot of info about screen touch events
Please do exactly the following, do not touch screen other than below instructions, until you are done with log file
1- Boot into recovery, do not touch screen at all
2- Touch and lift finger on top left corner
3- Touch and lif on top right
4- Touch and lift on bottom left
5- Touch and lift on bottom right
6- Touch and lift on a menu
7- Touch and lift on a second menu
For steps 6 and 7, describe what happens
Now, using hardware keys vol up/down, navigate to Advanced / Error Reporting
Attach here the /sdcard/clockworkmod/recovery.log file you get
This will help me spot the issue
Click to expand...
Click to collapse
Step 6 i touched and lifted on mounts and storage.The menu highlight moved one step down from top of menu.
Step 7 selected advanced and the menu highlight moved one step down.
http://db.tt/7ACmzmuu
Sent from my GT-N8010 using xda premium
Things seems a bit more complicated
I thought it was the x / y flipped, but not
The log you provided shows 4000x4000 board HxW coordinates
I need more debugging, sorry
Here's a new debug version. It will write into log many useful info regarding all the gui events
http://www.mediafire.com/file/0mnlne32jnof1v3/philz_touch_4.90.9-n8000-debug-touch.zip
Please proceed again exactly as below:
Each time, only touch screen and immediately lift finger, do not keep it on screen
1- Boot into recovery, do not touch screen at all
2- Touch and lift finger on top left corner (outside any menu)
3- Touch and lif on top right (outside any menu)
4- Touch and lift on bottom left (outside any menu)
5- Touch and lift on bottom right (outside any menu)
6- Touch and lift on "Install Zip menu"
7- Touch and lift on "PhilZ Settings" menu
Now, do not touch the screen any more
Use hardware buttons:
- Go to Advanced / Error Report
- upload here the /sdcard/clockworkmod/recovery.log file you get
If you continue debugging, I'll be able to fix it
Many thanks
Re: [N8000][CWM Advanced Edition] PhilZ Touch
Phil3759 said:
Things seems a bit more complicated
I thought it was the x / y flipped, but not
The log you provided shows 4000x4000 board HxW coordinates
I need more debugging, sorry
Here's a new debug version. It will write into log many useful info regarding all the gui events
http://www.mediafire.com/file/0mnlne32jnof1v3/philz_touch_4.90.9-n8000-debug-touch.zip
Please proceed again exactly as below:
Each time, only touch screen and immediately lift finger, do not keep it on screen
1- Boot into recovery, do not touch screen at all
2- Touch and lift finger on top left corner (outside any menu)
3- Touch and lif on top right (outside any menu)
4- Touch and lift on bottom left (outside any menu)
5- Touch and lift on bottom right (outside any menu)
6- Touch and lift on "Install Zip menu"
7- Touch and lift on "PhilZ Settings" menu
Now, do not touch the screen any more
Use hardware buttons:
- Go to Advanced / Error Report
- upload here the /sdcard/clockworkmod/recovery.log file you get
If you continue debugging, I'll be able to fix it
Many thanks
Click to expand...
Click to collapse
Sorry for the delay.
http://db.tt/7ACmzmuu
I'll be at work for at least 12 hours today so won't be around for anymore debugging.Hope someone else can help until i get home.
Sent from my GT-N8010 using xda premium
Issue:
No BT call.
Broken audio in VOIP (viber,skype,teamspeak etc). Tinyalsa would fix that, but it breaks calls.
Mic key (voice search) works, you need to enable: settings -> system -> hardware keys -> enable custom actions (check) and app switch set to voice search.
To get home key logn press action: settings -> system -> hardware keys -> enable custom actions (check) and home key (long press) set to Recent app switcher
When you upgrade, phone app may not work, you must remove the shourtcut, and readd. (thanks scotte9999)
Sometimes it stuck boot logo (cm,samsung,roger), please remove the battery and wait atleast 5 minutes,
Offline charger, you can leave with removing charger and holding power button for 2 sec, and glide will boot.
Liblight works very simple, when your lcd birghtness low buttons and keyboard light is on. You can use qwertyled or other liblight,read more.
Slow storage performance in some apps.
download
http://dualhoki.vim.hu/bubor/dev/pac_i927_4.3.Build-1_20140225-111215.zip
http://rpi.bubor.hu/bubor/dev/pac_i927_4.3.Build-1_20140225-111215.zip
changelog
20130912: phone encrypt support
20130913: BT LPM support, overclock support
20130921: PACMAN update
20130925: camera and charger
20131002: www/com key fix
20131007: PACMAN update
20131018: keyboard arrow fix
20131028: vibration intesity
20140102: just PACMAN update
20140225: just PACMAN update, I havent tested.
install
factory default
install zip
gapps included in my zip file, you dont need to install any gapps
reserved
can´t swap SDCards
edit /sysrem/build.prob and add:
Code:
# Change to 1 for swapping SD cards
persist.sys.vold.switchexternal=1
below
Code:
# Storage configuration
ro.vold.switchablepair=/storage/sdcard0,/storage/sdcard1
You can use recovery installable zip: http://dualhoki.vim.hu/bubor/dev/swap-internalsd-externelsd.zip
gyroscope fix
power off the phone (better remove battery for sure), put on a desk, power on and wait, it shoud calibrate itself.
Credits:
* tonyp https://github.com/tonyp/android_vendor_google
* Epsylon3 https://github.com/tpruvot/android_device_samsung_i9103
* kick buttowski
* Adam77Root
* yohan4ws
* gtmaster303
* The-Covenant team
* dman3285
* thegreatergood
* spyke555
yippppy downloading right now
thanks bubor, looks great
How do I make the keyboard lights work ?
---------- Post added at 03:18 AM ---------- Previous post was at 03:14 AM ----------
greeneyez15o said:
How do I make the keyboard lights work ?
Click to expand...
Click to collapse
nvmd
Do I need to download gapps for this? Or is it included?
Kombatant said:
Do I need to download gapps for this? Or is it included?
Click to expand...
Click to collapse
included, original gapps doesnt compatible with tegra2 devices.
Thanks for the quick reply man, flashing as we speak; haven't updated my ROM in ages Will report back any findings.
edit: Apart from some text to speech crashes, everything's peachy so far
so far so good gooodwork!
flashed, no problem so far (except the known issues). No lag wake or delayed-until-wake SMS seen, but i've just flashed the ROM for 12 hours so I can say that they are reduced, but i'm not sure if they are fixed or not. I prefer the old style quick setting button, but this is good tho
Wow, I was surprised at how functional this was for how new the thread is.Everything I've tried has worked with no issue (basic functions, data, a2dp bluetooth, sd card, wifi, gps). going to try and Wifi tether and actually trying to use the "phone" functins when I get a chance.
One thing so far, I don't think this has been said, is that the recents takes forever to pop up (like 6-7 seconds!). I tried remapping it away from the home button, but it still didn't speed up.
Also, where do I customise those handy shortcuts in the recents? and wtf is a ribbon?
it looks like there's some problem with the WiFi toggling.
Action: pressing the WiFi button on quick setting panel and the quick pulldown menu
Expected result: the button flipped and show the new icon indicate that the WiFi has been turned on
Actual result: the button flipped, but the icon is still the old one (it's the icon when WiFi is off)
I tried going to setting and press the WiFi button, it switched from "Off" to "On" and stayed there for about 10 seconds, then switched bak to "Off" again.
It's pretty rare 'cause I only met this twice after 2 days using, a reboot will solve the problem.
Tyfighter said:
Wow, I was surprised at how functional this was for how new the thread is.
Click to expand...
Click to collapse
Seconded and signed, this is a quality release from the get go. Cheers man!
Question for you, since I am currently running PAC do I need to do a complete wipe/reset prior to flashing this update?
PghSportsGuy said:
Question for you, since I am currently running PAC do I need to do a complete wipe/reset prior to flashing this update?
Click to expand...
Click to collapse
better, but not must.
Phone app changed, so you must remove shortcuts and readd.
Bug: when you try to use the navbar widgets, the system UI get crash.
Sent from my SGH-I927 using xda app-developers app
Today I got a lot of "Cell Broadcasts" messages, contents are unreadable (only weird symbols), this ended after a reboot, anyone ?
BTW, when plugin in the charger while the phone is off it displays a charging icon (a circle with a battery), normally it will automatically turns on the phone when the battery reaches - let's say - 15%. But to this ROM it doesn't, I have to do a manual reboot.
hi
help
I can not download apps from google play
expl:
facebook could not be download due to an error. (error retrieving information from server . [RPC:S-5:AEC-0])
dadashi.reza said:
hi
help
I can not download apps from google play
expl:
facebook could not be download due to an error. (error retrieving information from server . [RPC:S-5:AEC-0])
Click to expand...
Click to collapse
did you do full wipe install?
bubor said:
did you do full wipe install?
Click to expand...
Click to collapse
yes dear bubor...
I had to flash 4.2.2
4.3 rom after reset stay on rogers logo
This is a support thread for the ROM posted here.
http://forum.xda-developers.com/showthread.php?p=49394355
* It is very important to clear factory data/cache after installing the CM7 rom.
* If your stuck on the android boot screen, connect usb and do a logcat to see what it is crashing on.
* The battery_charger has been replaced in this build as a safety backup to get into bootmenu. Anytime the phone is powered off and then plugged in it will boot to bootmenu instead of the charging screen.
* It is very important to clear factory data/cache after installing the CM7 rom.
Click to expand...
Click to collapse
I make all wipe data/cache and even Dalvik cache before and after install CM7 - but I stuck on the android boot screen.
But note: I made all wipes from CWM, because stock recovery is not works on my phone (only green robot and yellow triangle and that's all - nothing key works, only pull battery helps).
* If your stuck on the android boot screen, connect usb and do a logcat to see what it is crashing on.
Click to expand...
Click to collapse
How can I make this (run logcat)?
Thanks for the advices.
Im not sure the clear data/cache works right in CWM. I have not tested it. To access the menu in the stock recovery hit the Home key.
To output a logcat open a command prompt and run "adb logcat"
If you want to output it to a file use "adb logcat > filename.txt"
so there is some querrys:
- torch app does not work as a flashlight, while it stay in status bar and even task killer wont help
- led notification light does not work at all, i guess there is no app for that and original is missing
- it wont unlock sim card, or lock it while it's unlocked. message is "incorrect pin". previously unlocked on other phone sim works fine. pin correct.
- the reboot menu list wont operate with joystick, only touch.
- both cameras wont work in skype, when forced induce crash.
- dev tools options become a force close
- voice dialer started by long press call button opens in wrong screen orientation and does not work. it work if started from all apps.
- superuser does not ask about allowing su permissions, there is no app listed as allowed su perm. while all super su apps works fine as usual.
- yandex maps app issue. rendering map result is quite not what it should be
I did it! Thanks for stock recovery main key (Home) .
And now some my notes (first, I use Russian language and CM7 has it).
- torch app doesn't work - this right for me too;
- about led - not work too;
- about sim - not check this yet;
- the reboot menu OPERATE for me with D-Pad;
- I don't use Skype;
- dev tools work in full for me;
- all correct about voice dialer;
- it's right too;
- don't install yandex maps yet.
wifi is not work
clxer said:
wifi is not work
Click to expand...
Click to collapse
was't been working for me too, but first reboot solved it
a lot of apps that uses the hardware gpu does not work properly, i guess this is same as camera driver problem and it can't be resolved till motorola releases it freely(only if)
also i am having issue with call ringtone - it rings for fraction of a second and then goes silent
I missed some egl librarires in the build, copying the attached files to /system/lib/egl should correct some of the graphic issues.
retr13 said:
was't been working for me too, but first reboot solved it
a lot of apps that uses the hardware gpu does not work properly, i guess this is same as camera driver problem and it can't be resolved till motorola releases it freely(only if)
also i am having issue with call ringtone - it rings for fraction of a second and then goes silent
Click to expand...
Click to collapse
superdave said:
I missed some egl librarires in the build, copying the attached files to /system/lib/egl should correct some of the graphic issues.
Click to expand...
Click to collapse
antutu now running, mx harddecoding on the other hand dont
yandex. maps still weird
Good Job, and thank you
By the way, Pls tell me how to root defy pro.
I had tried many tools but both fail.
jimway said:
By the way, Pls tell me how to root defy pro.
I had tried many tools but both fail.
Click to expand...
Click to collapse
With poot.apk
http: / / ofimatica-programacion[dot]blogspot[dot]com/2014/02/rootear-telefonos-android-sin-necesidad[dot]html
Any updates?
edit- specifically, does CM7 fix the poor bluetooth A2DP quality of the stock ROM?
Sent from my XT560 using xda app-developers app