Dear All.
My F180K brick becase I try to flash freegee. I unbrick it using flashing E975 KDZ files (E975K10D_00.kdz),
I cannot use F180K KDZ it show unpack error.
Now my F180K can boot into android but not found internal storage.
in storage menu it show only internal storage about 400Mb.
I try to factory reset via vol up + power menu same result.
any one can help me
Thanks a lot.
I successful recovery my phone.
flash E97120C_00.kdz then factory reset.
all my storage show
extrct erro
[Help] F180K KDZ brush 20i following situations occur:
Is how else ah? I drive installed. KDZ download is complete and correct, and how it has been said Compression error? Help ~ ~ ~ ~ ~ ~ ~ ~
[R & D Test Tools Log File]
22:31:16: Launching SW update
22:31:16: Unpacking KDZ
22:32:57: KDZ file extraced
22:32:57: Extract file error
22:32:59: === FINISHED ===
i cannot update via lg mobile support tool,becose phone says battry is low but i fully chaged the battrey
brick my lg f180k help me plz
[R&D Test Tools Log File]
20:04:42 : Launching SW update
20:04:42 : Unpacking KDZ
20:05:41 : KDZ file extraced
20:05:42 : Extract file error
20:05:44 : ===FINISHED===
i updated F180K20N_00.kdz via kdz updater but it cannot successes
then i tried lg support tool then it said lack off battery power ,but i fully charged
plz help me how to unbrick my phone
chamaraaa said:
[R&D Test Tools Log File]
20:04:42 : Launching SW update
20:04:42 : Unpacking KDZ
20:05:41 : KDZ file extraced
20:05:42 : Extract file error
20:05:44 : ===FINISHED===
i updated F180K20N_00.kdz via kdz updater but it cannot successes
then i tried lg support tool then it said lack off battery power ,but i fully charged
plz help me how to unbrick my phone
Click to expand...
Click to collapse
Did you try new flash tool in http://forum.xda-developers.com/showthread.php?t=2498102
Hi I'm a noob who just bricked my F240L (korean ver.):crying: I somehow wiped my system partition and the result is disastrous; KDZ flashing is impossible via R&D / support tool and I can't even get into the recovery mode. Only download mode is available.
I heard that it could be fixed by using NPST but I only can find the files for E980 at
http://forum.xda-developers.com/showthread.php?t=2272177, not 240x series. Moreover, KDZ files for OG Pro cannot be extracted by using LGExtractor so there is no way I can get this file by my own.
So is there any possible way for me to get those files??
-------------------------------------------------------------------------------------------------------SOLVED----------------------------------------------------------------------------------------------------------------------
How to solve it ? I'm also having the same problem
I got the same problem also, mine is F240L (Korean version)
The differences is I can manage to enter CWM, but the CWM can't mount external SDcard. As if my MicroSD doesn't exist.
I got no backup file to restore via CWM 6.0.3.3.
Using R&D Tool to flash, after 10s update process. Appear error message "Insufficient Battery Level to Proceed", that's strange because the battery is 100% full.
Using KDZ Updater, the error message appear "File Extracted Error" for 2 KDZ files I got (10T and 10V).
Hard Reset didn't solve the problem.
Now I'm stuck in DOWNLOAD MODE and CWM 6.0.3.3 (can't do anything in CWM).
Before entering CWM, there's an error message "Secure Booting Error ! Cause : Device Unlock, so Boot success !"
Please, anyone would be so kindfull to HELP.
@stupididiotism can you explain how you solve it ?
@chimmot307 have you ever tried this version to flash (translate from chinese)
so my phone was bricked (only download mode available) 1hour ago:
go in download mode->install LG support tool->in menu go to "customer support"->"recovery phone"->(your imei should be here or enter it if not)->click check
and now wait it download the whole img and flash it for you
The firmware 10T in baidu.com is broken, asking for username and password to resume. Little HELP with the username and password, fellas ?
I follow your advice go to "customer support"->"recovery phone"
After 10s update process. Appear error message "Insufficient Battery Level to Proceed", that's strange because the battery is 100% full same with 2nd battery whose 100% full also.
It seems LG Corps. tried to block anyone outside Korean to update their phone (I live in Indonesia, got this phone from real Korean people who sale this phone in Indonesia illegally, because Indonesian market is E988-16GB storage compare to F240L more spacious).
chimmot307 said:
I follow your advice go to "customer support"->"recovery phone"
After 10s update process. Appear error message "Insufficient Battery Level to Proceed", that's strange because the battery is 100% full same with 2nd battery whose 100% full also.
It seems LG Corps. tried to block anyone outside Korean to update their phone (I live in Indonesia, got this phone from real Korean people who sale this phone in Indonesia illegally, because Indonesian market is E988-16GB storage compare to F240L more spacious).
Click to expand...
Click to collapse
ok i'm in France, so try with LG pc suite it have it own version of LG support tool in it
just go in device->firmware recovery
that's the method i used
smaybe said:
ok i'm in France, so try with LG pc suite it have it own version of LG support tool in it
just go in device->firmware recovery
that's the method i used
Click to expand...
Click to collapse
Following your 1st advice, I managed to download the KDZ from baidu.com, and run the tutorial step by step. Everything runs smoothly.
Thanks in advance @smaybe. I owe you BIG one.
:good:
For those who got stuck in DOWNLOAD mode, you can follow these steps (in attachment).
LG PC Suite won't recognise my device (in DOWNLOAD MODE), it only recognise when in LG SOFTWARE MODE (Settings => PC Connection => USB Connection Type => LG Software).
So I can't go to Device => Firmware Recovery.
Why did you delete the 1st advice, @smaybe ? Totally recommended.
hi guys
I was in the worst condition : wiped system partition and moreover, I hard reset my 'rooted' phone.
Recovery mode not supported and kdz flashing also not working.
Then I found this divine tool called 'LG mobile flash tool v1.5' and I could find the tot and dll files for F240 series from some china website (I paid for that tho)
So my point is if anyone holding F240L and having the same problem as me. Then I can send you the files. I feel like posting the file here is a violation of intellectual property of the chinese devleoper(?! what am I saying?)
chimmot307 said:
LG PC Suite won't recognise my device (in DOWNLOAD MODE), it only recognise when in LG SOFTWARE MODE (Settings => PC Connection => USB Connection Type => LG Software).
So I can't go to Device => Firmware Recovery.
Why did you delete the 1st advice, @smaybe ? Totally recommended.
Click to expand...
Click to collapse
It's strange I will look after work but for me it recognise even in download mode
I deleted because I thought the last solution is easier i will take it back
LG PC Suite sucks
I've updated to the latest version, it still doesn't recognise my F240L (in SOFTWARE MODE), it said "Need to change with the right cable" even when I swap with different USB cable.
Or maybe my Windows 7 Ultimate (64bit) having problem in compatibility with PC Suite that won't recognise the USB. Cause, I haven't try with different operating system (Mac, or Windows XP)
Stuck in U+ LTE Logo
Dungeon Hunter 4 messing my Optimus G Pro in this thread http://forum.xda-developers.com/showthread.php?t=2380374
So I decided, to wipe system & data partition.
Hope that KDZ Updater will bring it back normal the way smaybe told me to.
KDZ Updater show 100% Finished, but my F240L still stuck in U+ LTE Logo.
So I try new LG Mobile Support Tool, Upgrade Recovery => IMEI=> OK. Updating to 1.69 GB, 100% finished, still stuck in U+ LTE Logo.
I haven't try LG Mobile Flash Tool 1.5, maybe stupididiotism could tell me step by step ! And not to forget to send the TOT & DLL files.
This is my email : [email protected]
Thanks in advance.
LG Flashtool Error Message
I run LG Flashtool according to website http://forum.gsmhosting.com/vbb/f177/lg-flash-tool-free-no-need-b2b-user-pass-1628819/index2.html
Extract F240L10t_00.kdz from Baidu.com, got 2 file :
- LGUP_GKV.dll
- F240L10t_00.dz
So I used those 2 file in LG Flashtool ( I don't know if those the correct files to use in LG Flashtool, cause I can't seem to find DLL file for F240L, but I think for S/W file is correct ).
Used port COM41 to flash (DOWNLOAD MODE is activated on F240L). Then I unplugged the USB cable for 5s, and replugged it. Error message appears as follow.
Am I using the correct DLL file to flash ? If not, would you be so kind to upload the DLL so I can flash my F240L ?
Thanks.
I need DLL file for LG FlashTool
stupididiotism said:
I was in the worst condition : wiped system partition and moreover, I hard reset my 'rooted' phone.
Recovery mode not supported and kdz flashing also not working.
Then I found this divine tool called 'LG mobile flash tool v1.5' and I could find the tot and dll files for F240 series from some china website (I paid for that tho)
So my point is if anyone holding F240L and having the same problem as me. Then I can send you the files. I feel like posting the file here is a violation of intellectual property of the chinese devleoper(?! what am I saying?)
Click to expand...
Click to collapse
I need it badly, do you mind sending the DLL and TOT files for me, @stupididiotism ?
Here's my email : [email protected]
Thanks in advance.:angel:
LG Flashtool DOES the job
Finally, get my F240L working after stuck in U+ LTE Logo.
Using this method http://forum.gsmhosting.com/vbb/f177/lg-flash-tool-free-no-need-b2b-user-pass-1628819/index2.html
And got LGUP_GKV.DLL from extracting F240L10t_00.kdz from pan.baidu.com (see attachment)
And got TOT file from http://www.gaojituan.com/thread-90-1-1.html or http://www.optimusforums.com/threads/f240-optimus-g-pro-firmware-downloads.7679
I hope this solution might help someone who ever got this problem.
Enjoy this super AWESOME phone.
chimmot307 said:
Finally, get my F240L working after stuck in U+ LTE Logo.
Using this method http://forum.gsmhosting.com/vbb/f177/lg-flash-tool-free-no-need-b2b-user-pass-1628819/index2.html
And got LGUP_GKV.DLL from extracting F240L10t_00.kdz from pan.baidu.com (see attachment)
And got TOT file from http://www.gaojituan.com/thread-90-1-1.html or http://www.optimusforums.com/threads/f240-optimus-g-pro-firmware-downloads.7679
I hope this solution might help someone who ever got this problem.
Enjoy this super AWESOME phone.
Click to expand...
Click to collapse
Could you post TOT file please. I'm stuck in CWM, what do I do?
chimmot307 said:
Following your 1st advice, I managed to download the KDZ from baidu.com, and run the tutorial step by step. Everything runs smoothly.
Thanks in advance @smaybe. I owe you BIG one.
:good:
For those who got stuck in DOWNLOAD mode, you can follow these steps (in attachment).
Click to expand...
Click to collapse
I have the same probleme, low battery...
This quality is to bad can't see the picture. Can you re up please?
stupididiotism said:
I was in the worst condition : wiped system partition and moreover, I hard reset my 'rooted' phone.
Recovery mode not supported and kdz flashing also not working.
Then I found this divine tool called 'LG mobile flash tool v1.5' and I could find the tot and dll files for F240 series from some china website (I paid for that tho)
So my point is if anyone holding F240L and having the same problem as me. Then I can send you the files. I feel like posting the file here is a violation of intellectual property of the chinese devleoper(?! what am I saying?)
Click to expand...
Click to collapse
Hi , pls i really need the f240l files, can u pls send me?
thx in advance
Follow this link
http://forum.xda-developers.com/showthread.php?t=2396048
Sent from my LG-F240L using xda app-developers app
What did you use to extract the DLL? I tried 7zip and it doesn't recognize the format
chimmot307 said:
I run LG Flashtool according to website http://forum.gsmhosting.com/vbb/f177/lg-flash-tool-free-no-need-b2b-user-pass-1628819/index2.html
Extract F240L10t_00.kdz from Baidu.com, got 2 file :
- LGUP_GKV.dll
- F240L10t_00.dz
So I used those 2 file in LG Flashtool ( I don't know if those the correct files to use in LG Flashtool, cause I can't seem to find DLL file for F240L, but I think for S/W file is correct ).
Used port COM41 to flash (DOWNLOAD MODE is activated on F240L). Then I unplugged the USB cable for 5s, and replugged it. Error message appears as follow.
Am I using the correct DLL file to flash ? If not, would you be so kind to upload the DLL so I can flash my F240L ?
Thanks.
Click to expand...
Click to collapse
so after an allnighter and alot of brainstorming i finally got my device into download mode but when i start the process the KDZ_FW_UPD freezes at the unpacking process.anyone have an idea of what might be wrong ?
install msx something in the kdz updater folder ,
zenalc said:
install msx something in the kdz updater folder ,
Click to expand...
Click to collapse
Just installed it and i still get (Not Responding) after like 30 sec
Im downloading the .kdz again and see if that helps
it usually packs the data in c/programdata ( u need to turn hidden files on ) depending on ur pc
but u can try redownloading the kdz
try first to replug the usb. i think the driver for download mode fails on first plug which also happened with me.
I have a new LG G3 D855 whith 4.4.2 firmware and im trying to update to lollipop.
i use booth LG flash tool and LGMobile Support Tool and its allways stuck at 2%...
please help my
Why have you tried manually the upgrade from computer? Your device won't to recognize updates by itself?
However... be sure you have downloaded latest LG driver (I presume you're using Windows on your PC), here you can download the proper ROM file, while to flash them you only need LG Flash Tool 2014 (only one of the two cited softwares is needed).
At this point it's very simple to proceed:
> Plug the device into computer, probably your PC need to recognize phone drivers, if it happens be patient and wait for it to finish;
> Open LG Flash Tool;
> Select the downloaded KDZ file (the rom file to be flashed).
> Now if you want to keep upgrade without losing data, press the Normal flash button, if you want to do a clean and surely working installation, press the CSE Flash one.
Tell me if you solved or the flash have a failed result.
Hello hello,
I unlocked bootloader, installed TWRP 2.8.7.0 (adb -> fastboot method) and then I flashed SuperSU 2.46 zip. After reboot from TWRP my phone stuck.
I can't access TWRP or i don't know how to…
System isn't starting BUT sometimes after few minutes of seeing LG logo i see standard wallpaper and suddenly animation freezes. That's all.
When i go to recovery mode (voldown+power, release power and press power again) I can "do" factory reset. I choose 2xYES and i see green android. Then phone is restarting but i should enter to TWRP, right?
I tried to flash stock system (kdz, tot, dz) via:
- LG Flash Tool 2014
- LG Flash Tool 1.8.6.527
- LGUP
- LG Bridge
but nothing…
My phone PID and IMEI is null :/ (and "CUMSS" to :?)
I tried fix that with QPST (2 different versions) but in device manager my phone is only detected as COM port. No "Android Device". I can't read and write anything…
adb isn't working
I tried all USB 2.0 ports, different drivers, roms (even not for 815), dlls.
I fought 3 days and still have brick, not smartphone
I have only download mode working.
I can send commands to com port (Send_Command.exe) but sometimes nothing happen, sometimes i see "fail" after sent command.
Any ideas? Can I install recovery through download mode? Or maybe somebody know how to send files to phone in download mode but without adb?
I had stock rom MM V20L. What else you need to know?
Thanks for any suggestions, sorry for chaos in post and my english.
After trying different roms in different programs with 3 versions of dlls and different drivers…
I found solution: just reinstalled .NET Framework and then finally i flashed by LGUP (refurbish, v20L, kdz, dll 0.0.3.23)!
Welcome back H815
2 0 said:
After trying different roms in different programs with 3 versions of dlls and different drivers…
I found solution: just reinstalled .NET Framework and then finally i flashed by LGUP (refurbish, v20L, kdz, dll 0.0.3.23)!
Welcome back H815
Click to expand...
Click to collapse
where did you founf v20L kdz i need it because my phone wont flash any kdz i think its to prevent downgrades
https://lg-firmwares.com/lg-h815-firmwares/
Try some from skdubg's link. This is probable the same as mine
PLS Europe PL/Poland H81520l_00_0928.kdz 1.68 G 2016-11-25
Click to expand...
Click to collapse
download-file/?fileId=4325 I can't post links
This is MD5 of my file 8f685baf42869c50ec5f1b7770aa3957 *H81520l_00_0928.kdz
If you still can't flash then i will upload my kdz somewhere. GL
LG G4 Model F500L Stuck on download mode After Downgrade
Hi
i have a problem with my LG G4 Model F500L i try to downgrade from Marsmallow to Lolilpop By Flashing with LGUP Tool when i flash it. it error at 16% boot fail. So i disconnect USB and pull out battery and when i turn on it stuck on download mode.. i have try to flash with any firmware and any LG Tools but it's still fail at writing boot step i had try with Optopus box but it's still fail at wrting boot fail what is the problem . i need help now.... i just bought my phone for a week. Thanks for your helping ....