What is Odex and deodex?
There are a lot of threads that explain this. Google it
http://forum.xda-developers.com/showthread.php?t=2200349
IMPORTANT NOTE: Use CWM recovery. If you try in TWR, you end up in boot loops. REASON : The reason it doesn't work with TWRP is because TWRP is dynamically linked and TWRP is usually set up to prevent linking to libraries in /system.
ANOTHER IMPORTANT NOTE: Setup your MyOneV ROM as per your preference and then Use this script. Once you use this script you can't do any changes to SystemUI.apk and frameworks.
Credits goes to,
R_a_z_v_a_n
androidphone2012
exactly what I need
Thank you very much! I will try!
U can also use Kuban odexer
It's an app, no flashing required
russellvone said:
U can also use Kuban odexer
It's an app, no flashing required
Click to expand...
Click to collapse
So your ready to pay that much when you can get it here for free?
It hardly takes 5 secs to flash a recovery... which is better, you tell me? I have tried such apps before for eg. Odex me, it gave me problems during calls and wifi. My script is 100% gauranteed to work well if you follow my instrustions.
Sent from my One V using xda app-developers app
Will this script work for all phones or just the One v? I don't have a One of any kind, but I am running a 4.2.2 Evervolv nightly.
ivanrvf said:
So your ready to pay that much when you can get it here for free?
It hardly takes 5 secs to flash a recovery... which is better, you tell me? I have tried such apps before for eg. Odex me, it gave me problems during calls and wifi. My script is 100% gauranteed to work well if you follow my instrustions.
Sent from my One V using xda app-developers app
Click to expand...
Click to collapse
Yeahh, well... I don't know if it's because I'm PrimoC, but I've tried 3 different ClockWorkdMod recoveries, and all failed to boot after flashing this.
On a Fresh Wipe, and flashing this right after the rom, it boots, but it's still deodexed. I've also mounted the system.
Kuban Odexer, and Odex Me also fails to work for me on Sense roms.
Any thoughts?
Curiousn00b said:
Yeahh, well... I don't know if it's because I'm PrimoC, but I've tried 3 different ClockWorkdMod recoveries, and all failed to boot after flashing this.
On a Fresh Wipe, and flashing this right after the rom, it boots, but it's still deodexed. I've also mounted the system.
Kuban Odexer, and Odex Me also fails to work for me on Sense roms.
Any thoughts?
Click to expand...
Click to collapse
Primoc is different. If u post your init.rc file from the root then I can make a script to work with Primoc.
Sent from my One V using xda app-developers app
Sleepycloud said:
Will this script work for all phones or just the One v? I don't have a One of any kind, but I am running a 4.2.2 Evervolv nightly.
Click to expand...
Click to collapse
Only MyOneV, but if you want your rom odexed, post your init.rc file from the root.
Sent from my One V using xda app-developers app
ivanrvf said:
Only MyOneV, but if you want your rom odexed, post your init.rc file from the root.
Sent from my One V using xda app-developers app
Click to expand...
Click to collapse
Here you go buddy. What do you have planned?
Let me know if that doesn't work.
ivanrvf said:
Only MyOneV, but if you want your rom odexed, post your init.rc file from the root.
Sent from my One V using xda app-developers app
Click to expand...
Click to collapse
The Kuban Odexer only odexes my framework, not the apps. Will your's do the apps too? If your wondering why I posted here it was because this thread popped up in a search.
Just for your info, I have an Evo 4G running the 4.2.2 stable Evervolv nightly release, dated 12-13-12 with Wambo_Bomb's Hammerslammer Kernel. Dude, I am so sorry. I just realized I sent you the wrong init.rc. Let me send it again. My bad. i hope your not already working on it. Gimme a few minutes.
Sleepycloud said:
The Kuban Odexer only odexes my framework, not the apps. Will your's do the apps too? If your wondering why I posted here it was because this thread popped up in a search.
Just for your info, I have an Evo 4G running the 4.2.2 stable Evervolv nightly release, dated 12-13-12 with Wambo_Bomb's Hammerslammer Kernel. Dude, I am so sorry. I just realized I sent you the wrong init.rc. Let me send it again. My bad. i hope your not already working on it. Gimme a few minutes.
Click to expand...
Click to collapse
no haven't started yet.. PM me.
ivanrvf said:
no haven't started yet.. PM me.
Click to expand...
Click to collapse
Okay. I forgot that I loaded up a different nightly to test out the new squishy script. The stable release is my daily driver. I'll send you a PM in a few. Sorry bro.
ivanrvf said:
no haven't started yet.. PM me.
Click to expand...
Click to collapse
Here it is dude. Thanks for helping me with this. I've tried a few odexers but none of them work. Maybe your's will. The info I gave above is correct for this init.rc in case you need to know anything about my device and what I'm running.
Only for SleepyCloud
Sleepycloud said:
Here it is dude. Thanks for helping me with this. I've tried a few odexers but none of them work. Maybe your's will. The info I gave above is correct for this init.rc in case you need to know anything about my device and what I'm running.
Click to expand...
Click to collapse
this should work. try it and pm me if any issues. Important thing is it requires CWM recovery and init.d support in your rom, without that you'll end up in bootloop.
Also give credits to androidphone2012
ivanrvf said:
Only MyOneV, but if you want your rom odexed, post your init.rc file from the root.
Sent from my One V using xda app-developers app
Click to expand...
Click to collapse
I'm using the CDMA version of myOne, but I think I understand what your saying. That's a kernel file, isn;t it?
Sleepycloud said:
The Kuban Odexer only odexes my framework, not the apps. Will your's do the apps too? If your wondering why I posted here it was because this thread popped up in a search.
Just for your info, I have an Evo 4G running the 4.2.2 stable Evervolv nightly release, dated 12-13-12 with Wambo_Bomb's Hammerslammer Kernel. Dude, I am so sorry. I just realized I sent you the wrong init.rc. Let me send it again. My bad. i hope your not already working on it. Gimme a few minutes.
Click to expand...
Click to collapse
Kuban Odexer just stayed on Odexing, please wait. When I turn the phone sideways, it just stops and goes to " Ready to Odex! ". Didn't do a thing. :/
EDIT: Uploaded. Hopefully that's the right file. :victory:
Curiousn00b said:
I'm using the CDMA version of myOne, but I think I understand what your saying. That's a kernel file, isn;t it?
Kuban Odexer just stayed on Odexing, please wait. When I turn the phone sideways, it just stops and goes to " Ready to Odex! ". Didn't do a thing. :/
EDIT: Uploaded. Hopefully that's the right file. :victory:
Click to expand...
Click to collapse
Seems Primoc also have the same classpath. What I think is the CWM recovery must not be proper. I suggest you take a backup and try with TWRP. But a backup so that you don't have to flash the rom again. Use the same script in the op.
Sent from my One V using xda app-developers app
ivanrvf said:
Seems Primoc also have the same classpath. What I think is the CWM recovery must not be proper. I suggest you take a backup and try with TWRP. But a backup so that you don't have to flash the rom again. Use the same script in the op.
Sent from my One V using xda app-developers app
Click to expand...
Click to collapse
This has also failed. I pulled the system folder and it seems like the only thing there is system/bin, although, the bin folder is empty as well.
I was wondering if I could ask a favor. I'll PM you.
Curiousn00b said:
This has also failed. I pulled the system folder and it seems like the only thing there is system/bin, although, the bin folder is empty as well.
I was wondering if I could ask a favor. I'll PM you.
Click to expand...
Click to collapse
Sure!!
I'm also primoc.. kuban odexer works if you have init.d it worked just fine for me.
Also, I'm not trying to take away from the OP I'm just giving my experience of using Kuban odexer with myOne CDMA before this thread was even created.
ivanrvf said:
Sure!!
Click to expand...
Click to collapse
Baaah. Waiting for Dev Host to accept the upload. :/!
russellvone said:
I'm also primoc.. kuban odexer works if you have init.d it worked just fine for me.
Also, I'm not trying to take away from the OP I'm just giving my experience of using Kuban odexer with myOne CDMA before this thread was even created.
Click to expand...
Click to collapse
I know what you mean, but I'm really trying to become Odexed. xD
What rom did you use and how long did it take?
Related
I've wiped cache and downloaded stock gingerbread notification mod, vivow_stock_gingerbread_notification_bar_mod.zip but it does not seem to remove my GPS icon as it has for others. Any suggestions?
[email protected] said:
I've wiped cache and downloaded stock gingerbread notification mod, vivow_stock_gingerbread_notification_bar_mod.zip but it does not seem to remove my GPS icon as it has for others. Any suggestions?
Click to expand...
Click to collapse
are u using my mod?
I'm using the one from this post: http://forum.xda-developers.com/showthread.php?t=1206358&highlight=remove+gps+notification
Is there another that works that I should be using? I'd love to try another.
[email protected] said:
I'm using the one from this post: http://forum.xda-developers.com/showthread.php?t=1206358&highlight=remove+gps+notification
Is there another that works that I should be using? I'd love to try another.
Click to expand...
Click to collapse
yea I make this MOd for every ROM.
[email protected] said:
I'm using the one from this post: http://forum.xda-developers.com/showthread.php?t=1206358&highlight=remove+gps+notification
Is there another that works that I should be using? I'd love to try another.
Click to expand...
Click to collapse
Is your current rom deodexed? That is a must in order for it to work.
It may not be. Is there a quick way to tell? Is there a simple process to deodex? The rooting process went fine, and I assumed this opened the phone to all mods, but I must have been wrong. I'll search for a good link to deodex unless you have a better suggestion. Thanks.
[email protected] said:
It may not be. Is there a quick way to tell? Is there a simple process to deodex? The rooting process went fine, and I assumed this opened the phone to all mods, but I must have been wrong. I'll search for a good link to deodex unless you have a better suggestion. Thanks.
Click to expand...
Click to collapse
deodexing the ROM requires knowledge of using android kitchen and in a sense re-building the ROM, it's fairly simple if you know what you're doing. a good way to check if you'er rom is deodexed is with root explorer, and check out system/apps and if u see double things like MMS.apk and MMS.odex that odex, in deodex you would just see the mms.apk
+1 andybones.
The first question I guess would be are you running a custom rom? If not then you are not deodexed.
Sent from my HTC Droid Incredible 2 via the XDA app.
Yep, the .odex files are there, so I am NOT deodexed. Seems like it might not be worth the trouble to deodex. although I do have ROM manager backup and can reinstall if I severely screw up. I'm running the rooted 2.3.3 verizon gingerbread.
OK, Switched to VU 2.3.9 and now all seems to work fine! Thanks.
[email protected] said:
OK, Switched to VU 2.3.9 and now all seems to work fine! Thanks.
Click to expand...
Click to collapse
Glad to hear you have solved your issue.
Sent from my HTC Droid Incredible 2 via the XDA app.
This will remove the "Select input method" notification and the keyboard icon that's placed on the status bar.
Update zip is attached, but here's a guide on how to do it:
Follow my guide here for specifics on pulling files and decompiling/compiling.
In services.jar open com\android\server\InputMethodManagerService.smali
In setImeWindowStatus comment out line 8866
Code:
# if-eq v12, v0, :cond_3a
Save, compile, push to device.
--------------------------------------------------------------
This also makes the setImeWindowStatus function in InputMethodManagerService output this line to logcat
Code:
W/InputManagerService( 495): Ignoring setImeWindowStatus of uid 10084 token: [email protected]
As far as I can tell (did a lot of testing), this only ever gets called when you bring up the keyboard and it tries to display the "select input method" notification.
If you want to be on the safe side, do a nandroid backup or backup services.jar.
Enjoy!
Can you PM me? Please? LOL! Thank You!
Does this work for racing's ics skyrocket rom?
rlee008 said:
Does this work for racing's ics skyrocket rom?
Click to expand...
Click to collapse
It might. I've only tried it on RaverX3X's ROM.
Ok, i just tried flashing the zip file on racing's ics skyrocket port and it does remove the "select input notification". it doesnt seem to affect anything else so it seems safe.
Thanks for the tweak. Everything helps make these ports so much better!
Rlee
So just download and flash no wipe or anything I'm using the same one racer ics port
Sent from my SAMSUNG-SGH-I727 using xda premium
peppersu812 said:
So just download and flash no wipe or anything I'm using the same one racer ics port
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
never mind flashed it couldn't wait lol
Sent from my SAMSUNG-SGH-I727 using xda premium
Going to try this, thanks
rlee008 said:
Does this work for racing's ics skyrocket rom?
Click to expand...
Click to collapse
I should, all of these port roms all have the same base
I will test this on HTC Sensation ARHD 6.5.5 and will report.
I just ran the zip on HTC Rezound, amon recovery, latest leaked ICS, stock, rooted and it didn't work. Let me know if there is anything I can let you know to help make it work, otherwise I'll just wait.
teckels said:
I just ran the zip on HTC Rezound, amon recovery, latest leaked ICS, stock, rooted and it didn't work. Let me know if there is anything I can let you know to help make it work, otherwise I'll just wait.
Click to expand...
Click to collapse
Post or email me your services.jar
Sent from my SAMSUNG-SGH-T989 using xda premium
services.jar
thank you for taking a look.
Works on easy does it, just took a minute to boot up.
Sent from my SAMSUNG-SGH-T989 using XDA
teckels said:
thank you for taking a look.
Click to expand...
Click to collapse
You have to post the original services.jar from that ROM. The one you posted is the one from my patch
services.jar
this is from the rom I flashed. Sorry to hijack your thread.
Here you go.
Thanks again for helping. Unfortunently no luck. I do not expect any more assistance and don't want you to waste more time unless more folks with my phone are willing to try and see if it it just my issue or the phone. Also, I'll probably jump into a new rom in a few weeks if the rezound ota comes out so I wouldn't want you to go out of your way when who knows how long I will keep this one.
teckels said:
Thanks again for helping. Unfortunently no luck. I do not expect any more assistance and don't want you to waste more time unless more folks with my phone are willing to try and see if it it just my issue or the phone. Also, I'll probably jump into a new rom in a few weeks if the rezound ota comes out so I wouldn't want you to go out of your way when who knows how long I will keep this one.
Click to expand...
Click to collapse
Something went wrong earlier. I decompiled the one I made for you and the change wasn't in there. Try this one.
Sky ICS: This patch Does Not work on SKY custom Rom..... Not asking for any assistance, just wanted to let other skyrocket users know
Big thanks to
kennethpenn - for this wonderful Enable CRT Animation in Gingerbread guide
CarpeNoctem - for (OsiMood's) update-binary and install-script reference material
Brut.all - for apktool
blast0id - for easyFLASHABLEzipBUILDER
and of course everyone who put in the work to build the foundations on which all of this is built and everyone else I'm forgetting
Without further ado, here is the
CRT Animation for Captivate Glide I927
Here is the install zip for CWM - automatic install
i927-CRT-mod.zip
Here is the framework-res.apk - manual install, use a root file manager to copy to /system/framework/
framework-res.zip
Warning: This is made for the ATT stock rom. It may work on the Rogers rom as well. It may not work on a custom rom, if possible you should find the framework-res.apk specific to your rom, ask the rom creator to make one, or make your own using the guide and resources listed above. To be safe, always make a backup using CWM before installing ANY mod. It only takes a few minutes and can save you hours in the long run.
Disclaimer: Use at your own risk I'm not responsible if you brick your phone, yadda yadda. I have only tested this on an ATT 2.3.6 stock rom with ardatdat kernel. So far it seems to work great and looks awesome. There is a weird effect that if the screen is off and I push the power in for just the perfect number of milliseconds, the screen starts to turn on and then turns itself off again. But I have difficulty trying to get this to happen on purpose so I doubt it will prove much of an issue. It's probably just a quirk of having the CRT animation enabled. Anyway, all of that said,
Enjoy!
UPDATE:
Here are the uninstall files for the ATT 2.3.6 stock rom. All warning and disclaimers above also apply to these so always make a CWM backup first.
Here is the uninstall zip for CWM (reinstalls stock file) - automatic uninstall
i927-CRT-mod-removal.zip
Here is the stock framework-res.apk - manual install, use a root file manager to copy to /system/framework/
framework-res(stock).zip
Umm.. I made this mod 3 months ago... just saying
Sent from my SGH-I897 using xda premium running jellybean cm10
dman3285 said:
Umm.. I made this mod 3 months ago... just saying
Click to expand...
Click to collapse
Really? Well, where the heck did ya post it? I searched through the dev and general forum before I made this one. I found a couple request/discussion threads but no attachments that appeared to be confirmed working. Trust me, I'm lazy, I wouldn't have made it otherwise.
And yeah, I know it's old news but it still amuses me.
Edit: Ah, yes! The broken link! I do remember now. I guess I should have asked you to repost it first!
transce080 said:
Really? Well, where the heck did ya post it? I searched through the dev and general forum before I made this one. I found a couple request/discussion threads but no attachments that appeared to be confirmed working. Trust me, I'm lazy, I wouldn't have made it otherwise.
And yeah, I know it's old news but it still amuses me.
Click to expand...
Click to collapse
In my ROM thread... and my ROM has had it since release..look at my how to thread in my sig
Sent from my SGH-I897 using xda premium
dman3285 said:
In my ROM thread... and my ROM has had it since release..look at my how to thread in my sig
Click to expand...
Click to collapse
Ah well that kind of explains it. I was looking for a thread specific to CRT animation. I did suspect that some of the custom roms would already have it enabled but I wanted to give the stock run a good run for the money before trying any custom roms. Also, having the info in the middle of a custom rom thread doesn't make it very accessible. This thread was geared more towards people with stock roms who wanted an easy, confirmed way of enabling the animation.
Also, I have all signatures turned off in this forum because so many of them were large and intrusive that they were really hurting the readability (imo) of the site.
dman3285 said:
Umm.. I made this mod 3 months ago... just saying
Sent from my SGH-I897 using xda premium running jellybean cm10
Click to expand...
Click to collapse
Yes dman is right i have this mod with his rom so he gets all the credit just saying
Sent from my SAMSUNG-SGH-I927R using xda premium
jayjayjoker2 said:
Yes dman is right i have this mod with his rom so he gets all the credit just saying
Click to expand...
Click to collapse
FYI, this particular mod was not taken from his rom. It was created from the framework-res.apk in my own stock ATT rom and altered using the guide and resources mentioned in the first thread. So while he gets credit for doing it first, none of his work was used in the creation of this mod. (Edit: That I know of. Apologies if I'm mistaken. I'm not trying to rip off anyone's work or belittle anyone's contributions.)
It's fantastic, thanks man.
transce080 said:
FYI, this particular mod was not taken from his rom. It was created from the framework-res.apk in my own stock ATT rom and altered using the guide and resources mentioned in the first thread. So while he gets credit for doing it first, none of his work was used in the creation of this mod. (Edit: That I know of. Apologies if I'm mistaken. I'm not trying to rip off anyone's work or belittle anyone's contributions.)
Click to expand...
Click to collapse
Well I just love dman's work I mean he got rid of dead development for the glide!
Sent from my SAMSUNG-SGH-I927R using xda premium
Didn´t worked for me and now the power button just don´t work anymore. Any hints to uninstall it? I flashed the zip. Ozimood Rom.
Um, reflash? See here for CRT made by dman (confirmed working)
Flashed dman crt but i think my system was corrupted, stucked on bootloop. Done recovery now i´ll try dman.
Sorry about that, this is made specifically for the stock rom. If you have custom rom, you should get the framework-res.apk specific to that rom, as the rom creator may have made other changes as well. I'll edit the first post to make it more clear that this is for the stock rom.
Restored Osimood and flashed crt.zip... no luck.
All the install zip does is copy that one file to your system directory. I think it's absolutely impossible to hard brick from that. Don't you have a CWM backup you can restore?
Aquethys said:
Um, reflash? See here for CRT made by dman (confirmed working)
Click to expand...
Click to collapse
That link has been a 404 for at least the last couple weeks, so I greatly appreciate the work of the OP here.
Aquethys said:
Um, reflash? See here for CRT made by dman (confirmed working)
Click to expand...
Click to collapse
Tyfighter said:
That link has been a 404 for at least the last couple weeks, so I greatly appreciate the work of the OP here.
Click to expand...
Click to collapse
Damn. I was going to mention this but I was waiting to get enough posts to post in this forum. xD
Neither of the CRT On or CRT Off links work on this end.
So thanks a ton transce080. ^_^
Could you possibly add a CRT On as well? I know there's a guide in the Captivate Glide thread that Aquethys linked to but it'd be nice to have just have a flashable method.
Pyho said:
Could you possibly add a CRT On as well?
Click to expand...
Click to collapse
Sure thing. It will have to wait until later tonight after work or the weekend.
The first post is updated with the stock files for removing the mod.
transce080 said:
The first post is updated with the stock files for removing the mod.
Click to expand...
Click to collapse
Crt on has to have major modifications to the powermanagerservice.smali in the services.jar, it is by no means an easy mod as crt off
Sent from my SGH-I897 using xda premium
Does anyone know how to port over Google Now on the the GS2 running rooted stock ICS???
Yes, there's a zip file in the Themes and Apps section.
incredible315 said:
Does anyone know how to port over Google Now on the the GS2 running rooted stock ICS???
Click to expand...
Click to collapse
I guess going to themes and apps or just searching w/ google was too much... hahahaha
Hey don't forget to tell Gatorstew thanx! LOL :laugh:
Oh yea and GNow works lovely :good:
gatorstew said:
Yes, there's a zip file in the Themes and Apps section.
Click to expand...
Click to collapse
Yea i tried that one and it just continues to force closed, i spoke about the problem in the thread but got no reply.
Sent from my SGH-T989 using xda app-developers app
Here are the instructions:
http://forum.xda-developers.com/showpost.php?p=29756226&postcount=2856
Use Mikeyxda's version 6. I'm having no issues with it on my phone.
incredible315 said:
Yea i tried that one and it just continues to force closed, i spoke about the problem in the thread but got no reply.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Ok now you got to break it down for us, which one did you try - what link did you use - did you clear cache before flashing - you know all the particulars. Honestly its download flash profit
The link two posts above me is the latest. Zero issues its version 6 and the one in the themes in apps section is version 2
Sent from my SGH-T989 using xda app-developers app
v6 works good so far
shaunlit said:
v6 works good so far
Click to expand...
Click to collapse
+1
Sent from the pink Unicorn from the Darkside.
Running CM 9 Stable build, TDJ kernel 6.2. Works like a champ! I was hoping it'd ACTUALLY show me the scores for the teams I ask about, but I can't argue with how accurate it is when I speak.
I hit "search" to bring up the GNow app, not double tapping home.
i dont understand how to intsall it
guitarmon691 said:
i dont understand how to intsall it
Click to expand...
Click to collapse
ok there are different ways to install it all clearly laid out for you in the thread. I sugges take your time and read carefully. if you have rooted your phone then I dont see how this can be an issue. Honestly there are only a few ways to install anything android related:
Flash it - placing zip on sd card, booting into recovery and flash
install it - placing apk on sd card and clicking on it
Push it - done by using adb codes
Quite sure on that page its nothing more than flashing thru recovery since I have already done it.
I finally figured out why bootanimations no longer work in FI03 (I didn't bother checking FH23, I'm sure it will work for that build too).
I did a diff of all the lib files (there were 33) and narrowed it down to libsurfaceflinger.so. The file is showing a different binary signature between FH13 and FI03 even though they are exactly the same size byte for byte. If you take the file from FH13, custom bootanimation now works. :victory:
Give it a try and let me know if it works for you.
That is the same file you replace to fix the flicker after crt off animation. Nice job, i wonder how it changed to stop boot animations.
Sent from my SPH-D710 using xda app-developers app
_dan said:
That is the same file you replace to fix the flicker after crt off animation. Nice job, i wonder how it changed to stop boot animations.
Click to expand...
Click to collapse
That's correct, I almost forgot about that. Once I finally got around to trying the lib, it was the first file I replaced when I spotted it in the list.
tdunham said:
I finally figured out why bootanimations no longer work in FI03 (I didn't bother checking FH23).
I did a diff of all the lib files (there were 33) and narrowed it down to libsurfaceflinger.so. The file is showing a different binary signature between FH13 and FI03 even though they are exactly the same size byte for byte. If you take the file from FH13, custom bootanimation now works. :victory:
Give it a try and let me know if it works for you.
Click to expand...
Click to collapse
By any chance did you look at the file itself to see what was different?
rwilco12 said:
By any chance did you look at the file itself to see what was different?
Click to expand...
Click to collapse
I've never attempted to decompile libxxxx.so files. Do you know how?
Just wanted to say thanks for this find....awesome work man, i knew it was something more than just the standard samsungani switch...seriously, thank you!!!!!
Sent from my SPH-D710 using xda premium
I'm assuming we flash through recovery. Is a cache/delvik wipe necessary?
jmocherman said:
I'm assuming we flash through recovery. Is a cache/delvik wipe necessary?
Click to expand...
Click to collapse
Not really necessary but I suppose it couldn't hurt. If anyone finds out one way or another let us know and I can alter the flashable to wipe cache as well.
Thank you sir.
Works! Major thanks for this!
So.... Still how do you make bootanimations work? I've got one in system/media and one in data/ etc. ..... Still no luck. Just does the international s2 animation
moparfreak426 said:
So.... Still how do you make bootanimations work? I've got one in system/media and one in data/ etc. ..... Still no luck. Just does the international s2 animation
Click to expand...
Click to collapse
Have a look here to see if this helps.
http://forum.xda-developers.com/showthread.php?t=1818542
Page 3, the post from Venum.
Sent from my SPH-D710 using xda premium
I couldnt get any but the stock ones to work on CleanBlue FI25 would this help the .zips jus werent working i seen it said they were now working in FI25 i thought.
KrAyZiEOnE said:
I couldnt get any but the stock ones to work on CleanBlue FI25 would this help the .zips jus werent working i seen it said they were now working in FI25 i thought.
Click to expand...
Click to collapse
Yes, FI25 is working for custom bootanimations again (as long as the kernel you are using has custom bootanimation support).
I have a bunch of custom bootanimations ported over from Rom Toolbox if anyone wants to try them out. The link is in my sig.
tdunham said:
Yes, FI25 is working for custom bootanimations again (as long as the kernel you are using has custom bootanimation support).
I have a bunch of custom bootanimations ported over from Rom Toolbox if anyone wants to try them out. The link is in my sig.
Click to expand...
Click to collapse
I too have a bunch on a thread over in themes and apps if anyone wants some newer boot animations. Some classic ones too!
timmetal6669 said:
I too have a bunch on a thread over in themes and apps if anyone wants some newer boot animations. Some classic ones too!
Click to expand...
Click to collapse
Link?
Sent from my SPH-D710 using xda premium
moparfreak426 said:
Link?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=26159544
---------- Post added at 09:42 PM ---------- Previous post was at 09:11 PM ----------
tdunham said:
I have a bunch of custom bootanimations ported over from Rom Toolbox if anyone wants to try them out. The link is in my sig.
Click to expand...
Click to collapse
Thanks, although it wasn't easy to find them from the link in your sig... here is a direct link: http://forum.xda-developers.com/showthread.php?p=31624758
Excuse my ignorance, but when you say they, have been converted to work with ICS, do the Rom Toolbox versions not work with ICS? Just wondering what the difference is? Thanks!
rsngfrce said:
http://forum.xda-developers.com/showthread.php?p=26159544
---------- Post added at 09:42 PM ---------- Previous post was at 09:11 PM ----------
Thanks, although it wasn't easy to find them from the link in your sig... here is a direct link: http://forum.xda-developers.com/showthread.php?p=31624758
Excuse my ignorance, but when you say they, have been converted to work with ICS, do the Rom Toolbox versions not work with ICS? Just wondering what the difference is? Thanks!
Click to expand...
Click to collapse
The ones I did from that version of rom toolbox didn't work with ics. Even with the current version its hit or miss.
Sent from my SPH-D710 using xda premium
How do you get sounds put with boot animations to work? Where do they go?
Sent from my SPH-D710 using xda premium
moparfreak426 said:
How do you get sounds put with boot animations to work? Where do they go?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Put your sound in etc/ and name it PowerOn. Backup the sound that's there first if you don't want to loose it.