Develop Bugs

[Q] ROM question for Telus SGH-T989D

I have a simple question and i think ive seen some mention of it, but nothing quite definitive
I want to root my SGSIIX from Telus(989D), and ive figured out that i can follow the same instructions as the T-mobile version here:
http://forum.xda-developers.com/showthread.php?t=1332103
It suggests a ROM below that was originally posted for the T-mobile ver, is there any T-mobile branding on it visually such as boot screens etc?
Also...
If a ROM works flawlessly on the tmobile version, will it also work flawlessly on the telus version by default. Ive been eyeballing the possibility of Cyanogen or MIUI, and juggernaut...but i wanna make sure EVERYTHING works perfectly after doing so, or if there are certain things that might not work
Thanks! (sorry im rather new to android modding so im trying to learn)
And yes i searched around, but have only seen a few ppl post in threads saying 'it should work', then some say theyve had problems..so thought id make a post!

i have the same questions then you the tutorials i found are for the t-mobile rom
not the telus one but reading other post they are the same rom
but i dont whant to take the risk lol

rayman25 said:
i have the same questions then you the tutorials i found are for the t-mobile rom
not the telus one but reading other post they are the same rom
but i dont whant to take the risk lol
Click to expand...
Click to collapse
Same, specially since im new at this!

yes, they are identical software and hardware

i rooted the phone today there is alot of apps in the t-mobile version compare to the telus one I followed the instructions from this page
http://forum.xda-developers.com/showthread.php?t=1332103
the 4g network was gone could not connect to it only 3g was working
i uninstalled most apps with titanium backup pro but i end restoring to the back up i made from CWR
gonna give it another try when they are going to release a rom that is from telus version of the phone
i hope it helps you

The 4g is broken for me to ...it seems like the modders are only interested in the t-mobile version to, so it looks like even rooting(based on the fact that the rooted rom is also a t-mob) wont even be possible

Rekzer said:
The 4g is broken for me to ...it seems like the modders are only interested in the t-mobile version to, so it looks like even rooting(based on the fact that the rooted rom is also a t-mob) wont even be possible
Click to expand...
Click to collapse
What do you mean rooting? All you need to do is flash CWM and then the SU package, no need to change any ROM at all.

I rooted my Telus device using the T-Mobile instructions and all was well at home, it stayed on the Telus network and also keep 4G speed.
I went to work with it, where Telus service is very poor, and as soon as I lost Telus it roamed to Rogers and did not try and return to Telus even though I was in an area where Telus signal was good.
In the end I changed the device to wcdma mode only and set the device to manual provider and selected Telus and have had no problems with 4G or not being on Telus...

skadude66 said:
What do you mean rooting? All you need to do is flash CWM and then the SU package, no need to change any ROM at all.
Click to expand...
Click to collapse
Do you happen to have a link? I followed a guide on this forum that said the easiest way was to flash the rom!

I rooted my phone, it still said 4G.
When I installed beastMOD it says 3G. But I am definitely getting 4G speeds (20mbps). So.. maybe a bug with the difference in phones?

ughhh
trust me...stick with the telus rom. its actually better code then tmob. newer drivers and less debug code. I tried the tmob and its gawd aweful. if u want goodies...slap a kernel on it then theme it. best way to go imho.
Later
Chand.

haha, i only know how to follow step by step's for this stuff
i can only hope ppl switch over to the telus code i guess
Im trying to find how to root w/o flashing a rom though

Rekzer said:
haha, i only know how to follow step by step's for this stuff
i can only hope ppl switch over to the telus code i guess
Im trying to find how to root w/o flashing a rom though
Click to expand...
Click to collapse
For Telus you don't need to change roms when you root.
I'm running the stock rom on my phone with a modified kernel to allow the phone to run faster and the v6 memory mod as well as removing the clock from notification bar.
Installed Titanium and removed a bunch of the crap that came stock with phone too.

firebane said:
For Telus you don't need to change roms when you root.
I'm running the stock rom on my phone with a modified kernel to allow the phone to run faster and the v6 memory mod as well as removing the clock from notification bar.
Installed Titanium and removed a bunch of the crap that came stock with phone too.
Click to expand...
Click to collapse
Do i install a kernel the same way i install a ROM? Aka through CWM? And if so,which do you use?

Rekzer said:
Do i install a kernel the same way i install a ROM? Aka through CWM? And if so,which do you use?
Click to expand...
Click to collapse
I was using Jugs kernel but I switched to Synergy and like it better.
And yes.. I just download it to my sd card and install it thru CWM

Rekzer said:
haha, i only know how to follow step by step's for this stuff
i can only hope ppl switch over to the telus code i guess
Im trying to find how to root w/o flashing a rom though
Click to expand...
Click to collapse
Get the recovery.tar from here: http://forum.xda-developers.com/showthread.php?t=1315390
Flash that through ODIN (PDA mode in ODIN, Download mode on Phone)
Then, place the SU update (http://goo-inside.me/superuser/su-3.0.5-efgh-signed.zip) on the root of the SD card. Reboot to recovery, select install zip from SD Card and select the SU update. Reboot and you're rooted without having to use another ROM.
The reason why you keep getting a 3G signal when you are getting 4G speeds is because you are using a T-Mobile ROM. The way the Telus one works, if you don't have a ROM that is based off of Telus's source code, even though everything works perfectly fine, your signal will be "3G". It's really only an aesthetic thing, as the speeds themselves are 4G.

So what kernel do you recomend.
and is it the telus kernel with sudo rights ????

rayman25 said:
So what kernel do you recomend.
and is it the telus kernel with sudo rights ????
Click to expand...
Click to collapse
Not sure for kernel, I just used the stock one. I just finished flashing Synergy, haven't tried anything yet! I seem to have this issue where I need to re-search for my network after going into download mode (normal behavior?) so I need to get that working before I want to benchmark.

I fully tested a custom juggernaut rom and a rooted Telus stock rom and the juggernaut rom is waaayyy better. Smoother more options as well as better signal. True it says 3g but actually I get better speeds than stcok Telus rom. In my opinion after several tests don't use stock Telus. It may be better code than T-Mobile stock rom but custom juggernaut rom is way better
Sent from my SGH-T989 using XDA Premium App

Thanks guys!
Ive got it rooted with the lightning blue theme going, and froze a bunch of apps with Titanium that i hate seeing running in the background.
one last question though(i think)
I once had a Fascinate, when i flashed a voodoo mod kernel and tried to remove it, the phone became bricked and the entire insides of the phone had to be replaced
Can flashing a kernel mess with the boot loader(which i assume is cwm)? Is there anything i need to do differently when changing kernels as well, cause so far with ROMS ive just been resetting and flashing with ease.Also do Roms come with kernels, so flashing a rom will either go back to default/other kernels?

[Q] CSpire GS3 SCH-L710 rom???

Hey guys
CSpire Wireless formerly Cellular South has finally released their Galaxy S3. The model number is SCH-L710. The reason I am asking this question here and not in a different carriers forum is the L710 in model number. I don't pretend to understand why certain carriers GS3's are labeled with different model numbers, but I thought that since your GS3 and mine both have L710 I thought that possibly the hardware was closer to the same than say verizon's which is a completely different model designation. That being said I am desperate for a custom rom but don't wanna just go flashing any GS3 roms out there to see if any will work on my network. I would feel more comfortable knowing that I had a way to odin flash a stock rom in case any problems arise. Anyway if someone is kind enough and generous enough to help me locate a stock odin flashable rom, then I would be willing to help in any way I can to find a usable rom or port for my version of this great phone.
Thank you so much in advance

I went ahead and flashed the latest CM10 nightly for the Sprint version. Everything seems to be fine, except for data. I still have data, but it is very flaky and won't hardly hold a signal. I suspect it to be the PRL or CM itself.
We definitely need a stock rom for CSpire. I am willing to help any way I can.

abcleanonme said:
I went ahead and flashed the latest CM10 nightly for the Sprint version. Everything seems to be fine, except for data. I still have data, but it is very flaky and won't hardly hold a signal. I suspect it to be the PRL or CM itself.
We definitely need a stock rom for CSpire. I am willing to help any way I can.
Click to expand...
Click to collapse
find the proper PRL for C Spire and use this method (http://forum.xda-developers.com/showthread.php?t=1880781) to flash it

nicholaaaas said:
find the proper PRL for C Spire and use this method (http://forum.xda-developers.com/showthread.php?t=1880781) to flash it
Click to expand...
Click to collapse
Good luck finding that. Cspire keeps things like that unattainable. Unless *228 will work properly to update prl. Should anyone come across it please let me know. Bout to flash CM10

What about using QPST or something to pull the PRL off of a stock device? Can we get someone to do this before flashing any ROMs?

Okay. First of all, I didn't think to look at the PRL before I went and flashed the Sprint CM10. But now it says 20005. I restored my nandroid backup and pulled this PRL from my phone with QPST 2.7.374. In DFS Tool, I noticed there was a CSpire PRL 10009. I wrote this PRL to the Phone and am getting much better service on the stock TW ROM.
HOWEVER, I flashed the Sprint CM10 again and the same thing happened. It says PRL 10009, but there is little to no service and when it does have a little service, it is very flaky and eventually ends up with no data connection at all. Any more suggestions or ideas?

abcleanonme said:
What about using QPST or something to pull the PRL off of a stock device? Can we get someone to do this before flashing any ROMs?
Click to expand...
Click to collapse
after a few hours of trying to get my phone into diagnostic mode i found this that worked. *#22745927 then enable hidden menu then *#7284#
now i think i need to find a newer version of qpst so that it will recognize my phone.

This one worked for me: https://www.dropbox.com/s/tcfsxo5d6vsxfnn/QPST.2.7.374.rar

abcleanonme said:
This one worked for me: https://www.dropbox.com/s/tcfsxo5d6vsxfnn/QPST.2.7.374.rar
Click to expand...
Click to collapse
while i try to get qpst to read my phone can you please upload a copy of our prl and link it please

abcleanonme said:
This one worked for me: https://www.dropbox.com/s/tcfsxo5d6vsxfnn/QPST.2.7.374.rar
Click to expand...
Click to collapse
pm me please

here are some useful links i found.
http://androidforums.com/lg-optimus-m/419514-how-get-prl-off-your-phone.html
http://www.s3forums.com/forum/galaxy-s3-hacking-mods/1614-backup-qpst-backup-your-nv-data-imei-us-variants.html

abcleanonme said:
here are some useful links i found.
http://androidforums.com/lg-optimus-m/419514-how-get-prl-off-your-phone.html
http://www.s3forums.com/forum/galaxy-s3-hacking-mods/1614-backup-qpst-backup-your-nv-data-imei-us-variants.html
Click to expand...
Click to collapse
qpst still says no phone under the phone column no matter what i try

So far, this is what I have done:
First I used the following tool to download drivers for my phone and root ( via option 4 in the program).
http://forum.xda-developers.com/showthread.php?t=1746680
I used CWM to make a nandroid backup.
Next, I flashed the latest CM nightly for the Sprint version here:
http://get.cm/?device=d2spr
After doing this, everything worked fine, EXCEPT for data. I dialed *228 and let it do its thing. I actually had data, but the signal was extremely weak and very flaky. After messing with settings it would usually drop it altogether.
I restored my nandroid backup and noticed that although I had data, it seemed to be weaker than before ( although that may just be me).
I decided to follow the following guide on how to get the PRL from the phone:
http://androidforums.com/lg-optimus-m/419514-how-get-prl-off-your-phone.html
The version of QPST on that post was outdated, so I found and used QPST 2.7.374, which I posted a link to earlier in the thread.
I managed to copy the 20005 PRL off of my phone and saved it.
I then started up DFS Tool and wrote the CSpire 10009 PRL to my phone.
I get much better service on the stock ROM, but the Sprint CM builds still do the same thing. No data.
UPDATE: I did a *228 to get back on the 20005 PRL and it is working just as well as the 10009 PRL now.
Also, as OBSt4l0n discovered, there's simultaneous voice and data. Not sure if anyone else has noticed this or if this was happening before flashing roms
and PRL's.

Okay. We no longer believe it's the PRL causing the problems. More info to come. May be slower over the weekend with weekend stuff and all.
Sent from my SCH-L710 using xda premium

abcleanonme said:
Okay. We no longer believe it's the PRL causing the problems. More info to come. May be slower over the weekend with weekend stuff and all.
Sent from my SCH-L710 using xda premium
Click to expand...
Click to collapse
Thanks for the update. I thought everybody had long abandoned trying to port a rom to the cspire gs3 lol.

bone39367 said:
Thanks for the update. I thought everybody had long abandoned trying to port a rom to the cspire gs3 lol.
Click to expand...
Click to collapse
Out of curiosity, Could it be the APN's causing the issues? And from what I've seen the vzw variant seems closer to the cspire. but its hard to say. Just to try and eliminate possible causes, I would reccomend flashing this here and see if you get the same issues. http://goo-inside.me/devs/aokp/d2vzw/aokp_d2vzw_jb_build-4.zip Its AOKP for the vzw variant. I have used it as my daily driver for the past week and I'm on Sprint. Dont have to change anything in it, just flash.
Just my 2 cents

billard412 said:
Out of curiosity, Could it be the APN's causing the issues? And from what I've seen the vzw variant seems closer to the cspire. but its hard to say. Just to try and eliminate possible causes, I would reccomend flashing this here and see if you get the same issues. Its AOKP for the vzw variant. I have used it as my daily driver for the past week and I'm on Sprint. Dont have to change anything in it, just flash.
Just my 2 cents
Click to expand...
Click to collapse
Thanks. I'm tempted to try this but the only problem is I don't have a way of going back to stock. I did, however make a backup through cwm but I wish there was an absolute stock cspire rom out there. I would love to test out developer's roms and provide feedback if somebody knows where I could get a stock rom to flash for cspire's gs3....

bone39367 said:
Thanks. I'm tempted to try this but the only problem is I don't have a way of going back to stock. I did, however make a backup through cwm but I wish there was an absolute stock cspire rom out there. I would love to test out developer's roms and provide feedback if somebody knows where I could get a stock rom to flash for cspire's gs3....
Click to expand...
Click to collapse
I've been trying to find out.... without success.....

billard412 said:
Out of curiosity, Could it be the APN's causing the issues? And from what I've seen the vzw variant seems closer to the cspire. but its hard to say. Just to try and eliminate possible causes, I would reccomend flashing this here and see if you get the same issues. http://goo-inside.me/devs/aokp/d2vzw/aokp_d2vzw_jb_build-4.zip Its AOKP for the vzw variant. I have used it as my daily driver for the past week and I'm on Sprint. Dont have to change anything in it, just flash.
Just my 2 cents
Click to expand...
Click to collapse
Just tried this and still no data. We need a dev to look into this. Apparently there is something internal in code stopping our radio from functioning properly. I have attempted to pull my RIL file and insert it in cm10 then rebooting and no luck. Still no data. Any devs out there willing to look into this for us?
Sent from my SCH-L710 using xda app-developers app

Bump ****

All Things Boost Galaxy S III

1. Since the Galaxy S III became available as a Boost variant, there’s been an increasing amount of questions, issues, and requests for builds. I have collaborated with the powers that be, and it was determined that it might be a good idea to start a Boost only thread. This thread is dedicated to anything and everything Boost Galaxy S III related.
2. I will update and bump and sticky and edit and whatever else needs to be done the best that I can, but it is open and available to all. This is YOUR thread, just as much as it is mine. I encourage folks to ask questions, post relevant links, tutorials, helpful hints, and anything else they come across while tinkering with their new phone that may help others related to the Boost S3.
3. First and foremost, as always is the disclaimer. We are all responsible for our own actions. I am not responsible for what you do to your phone, so please do not flame me or anyone else in this thread if you do something that potentially fries your device.
4. If you post a link to something flashable, either through Odin, CWM, Heimdall, TWRP, etc, please test it on your own phone first or have someone test it before you do so. If it works, and will benefit someone, feel free to include it. I will most likely PM the dev and ask to put it in the OP.
5. And finally, please be courteous and respectful. We are all here to learn from one another, and do not need sarcasm, unkindness, flaming, or disrespect, of any kind. Thank you and enjoy.

Stock Unrooted OTA Odin Tar
This is the official, stock, right out of the box, Boost MD7. This will unroot your device, and take everything back to the way it was when you got it. Please thank the OP, Smith058, over at AF (link to OP at the bottom), since he was so gracious to let me post it here, and to let me use it to cook up something good for you folks More to come on that one! The only issue I’ve noticed on this build is there’s no boot up sound. But it flashed modem, stock recovery, put the device status back to “normal” and made the “custom” in Odin mode back to “official.” This should come in handy if you need to send it back for repair, or just want to start anew. The coming zip (once it’s uploaded) has working sound.
Stock MD7 Odin Tar Link https://mega.co.nz/#!ARkXGZCS!RITkIjvPnT51c6nyDdFvE2Z4oBNQt0PTcKnCGWuavdo
Link to Smith058’s OP(be sure to give him a shout out!)
http://androidforums.com/boost-mobile-galaxy-s3-all-things-root/753772-odin-backup-sph-l710_md7-stock.html
Stock OTA MG2 Tar:
http://www.androidfilehost.com/?fid=23212708291678209
Flashing Instructions:
1. Download and Install Odin to your PC
2. Download the ROM to your computer, and remember where you put it
3. Boot your phone into download(Odin) mode by pressing volume down, home button, and power button simultaneously
4. Once in Odin mode, connect your phone to your PC
5. Once the “COM” block turns blue, click the PDA button, and navigate to the ROM tar.
6. As a habit, I uncheck the F. Reset Time and Auto Reboot boxes as well
7. Click Start. When it’s done, pull the battery.
8. Reinsert battery, boot up, and profit

Links to Boost ROMs
Stock Rooted MD7 Flashable Zip -http://forum.xda-developers.com/showthread.php?t=2478888
Stock Unrooted MD7 Flashable Zip - http://forum.xda-developers.com/showthread.php?p=46367914#post46367914
Stock Rooted, Deodexed MG2 Zip - http://forum.xda-developers.com/showthread.php?p=47537971

One more, just to be on the safe side

jdsingle76 said:
The only issue I’ve noticed on this build is there’s no boot up sound. The coming zip (once it’s uploaded) has working sound.
Click to expand...
Click to collapse
My phone is running a rooted version of the stock MG2 ROM. While it has the Boost startup splash "4G" screen, I don't think there ever was a sound component.
Also - If I recall correctly, some custom ROMs labelled as compatible with the Sprint Galaxy S3 will cause us to LOSE 4G SERVICE, because they do not have the Boost-specific APN settings in them, and changing APN settings on Jellybean ROMs is (apparently) not possible as it was on Ice Cream Sandwich ROMs. So beware, and make sure that any ROMs that you want to flash will not kill your 4G!

SweetBearCub said:
My phone is running a rooted version of the stock MG2 ROM. While it has the Boost startup splash "4G" screen, I don't think there ever was a sound component.
Also - If I recall correctly, some custom ROMs labelled as compatible with the Sprint Galaxy S3 will cause us to LOSE 4G SERVICE, because they do not have the Boost-specific APN settings in them, and changing APN settings on Jellybean ROMs is (apparently) not possible as it was on Ice Cream Sandwich ROMs. So beware, and make sure that any ROMs that you want to flash will not kill your 4G!
Click to expand...
Click to collapse
I think it was an issue with the Tar, because when I built the flashable zips, they not only had the Boost animation, but the sound component as well. And I have seen around that some Sprint ROMs will cause issues with 4g. I know that it is possible to get into change the "guts" of your phone if you have your MSL by with JB Touchwiz ROMs by dialing ##3282# from your phone's dialer. However, for some reason, with the zip I just built, it's not cooperating. I'm going to swap out secphone.apk later today, from another stock build, and see if that fixes the issue. But thanks for the heads up. That's what this thread is all about.

I've been prompted for a system update... safe?

beneliezer said:
I've been prompted for a system update... safe?
Click to expand...
Click to collapse
If you flashed the rooted one, chances are it won't let you update, but give it a try. Additionally, if you have custom recovery, which you had to in order to flash the zip, it most likely won't let you update it either. It's an Android Software update, not a firmware. I would try it, and I'm sure it will fail, but at least you won't get prompted anymore for software updates But yes, it is safe to try.

jdsingle76 said:
If you flashed the rooted one, chances are it won't let you update, but give it a try. Additionally, if you have custom recovery, which you had to in order to flash the zip, it most likely won't let you update it either. It's an Android Software update, not a firmware. I would try it, and I'm sure it will fail, but at least you won't get prompted anymore for software updates But yes, it is safe to try.
Click to expand...
Click to collapse
jdsingle76 is correct. It won't hurt anything, it just won't work. If you accept the update, your phone will reboot into recovery, process for a few seconds, and fail with an error. However in my experience, that will not stop the software update prompts from re-occurring. If I recall, the best way to stop them was to use something like Titanium Backup and freeze something having to do with 'OTACERTS'. It's been a while, so my info may be out-of-date on that front.

can someone please reupload the stock SPH-L710 odin tar file else where before I brick my phone accidentally, its not letting me use recovery. The root method i used did not work correctly, now my phone is now working properly and i just want to get back to stock to try a different method for rooting, i need this odin file please!

nickdagreat said:
can someone please reupload the stock SPH-L710 odin tar file else where before I brick my phone accidentally, its not letting me use recovery. The root method i used did not work correctly, now my phone is now working properly and i just want to get back to stock to try a different method for rooting, i need this odin file please!
Click to expand...
Click to collapse
http://androidforums.com/boost-mob...backup-sph-l710_md7-stock-3.html#post6238089
Post #106

smith058 said:
http://androidforums.com/boost-mob...backup-sph-l710_md7-stock-3.html#post6238089
Post #106
Click to expand...
Click to collapse
Good to see ya bro. Thanks for throwing that up there. Just noticed the dropbox link was broken for too much traffic. I have the MG2 tar from Kies as well. This weekend if I get time I'll throw both of them in AFH and/or dev-host. Hope all's well, thanks for helping out!
J

Guys, i know this post is a little bit old, but i was wondering if I could flash this file with the Sprint Version (same one, SPH-L710) I know this will not harm my phone but I just want to make sure. is it safe?

erick1457 said:
Guys, i know this post is a little bit old, but i was wondering if I could flash this file with the Sprint Version (same one, SPH-L710) I know this will not harm my phone but I just want to make sure. is it safe?
Click to expand...
Click to collapse
What file from this op are you referring to? But to answer your question, yes, you can flash ant sprint file to the boost variant, and vice versa, you just might have to change apn, mmsc, stuff like that, to get mms to work.
Sent from my SPH-L710 using Tapatalk

Boost Stock 4.3
jdsingle76 said:
What file from this op are you referring to? But to answer your question, yes, you can flash ant sprint file to the boost variant, and vice versa, you just might have to change apn, mmsc, stuff like that, to get mms to work.
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
Thanks to all of u guys out there especially jdsingle76, Can anyone help with untouched Stock BoostMobile S3 4.3.tar ODIN ROM, i would be glad for any help in this regard, Meanwhile are we seeing Kitkat for BM S3? , Again is there a chance we can be KNOX free again in our lives?

alemosman said:
Thanks to all of u guys out there especially jdsingle76, Can anyone help with untouched Stock BoostMobile S3 4.3.tar ODIN ROM, i would be glad for any help in this regard, Meanwhile are we seeing Kitkat for BM S3? , Again is there a chance we can be KNOX free again in our lives?
Click to expand...
Click to collapse
I have not gotten my hands on a 4.3 Odin tar yet. If you do remember it'll have Knox, and I think Knox is here to stay. Ice heard rumors about Kit Kat for this phone but nothing's come out yet. Thanks for the support!
Sent from my SPH-L710 using Tapatalk

jdsingle76 said:
I have not gotten my hands on a 4.3 Odin tar yet. If you do remember it'll have Knox, and I think Knox is here to stay. Ice heard rumors about Kit Kat for this phone but nothing's come out yet. Thanks for the support!
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
Thank you Jdsingle76, Boost Mobile are doing a hell of a job there keeping the 4.3 Odin tar under their sleeves.

Are your enjoying my build
Sent from my SPH-L710 using Tapatalk

knox scares me
knox bootloader scares me soo much that am still running stock unrooted, am afraid when i void my warrant i might not be able to upgrade to kitkat if it ever comes out

alemosman said:
knox bootloader scares me soo much that am still running stock unrooted, am afraid when i void my warrant i might not be able to upgrade to kitkat if it ever comes out
Click to expand...
Click to collapse
Don't fret. .. If kitkat comes out there will definitely be a custom rom made with it that you will be able to flash. With root you will have many more options than you ever will with stock.

cm installer?

will it work with i747m? (canadian version, it's not listed as a supported device, and the android app says im not supported :s)
also, how do they expect you to make a nandroid backup without root?

ejatds said:
will it work with i747m? (canadian version, it's not listed as a supported device, and the android app says im not supported :s)
also, how do they expect you to make a nandroid backup without root?
Click to expand...
Click to collapse
Yeah the second I saw that (Rogers GS3) I just stopped. I swear this phone, or rogers, or samsung, does _NOT_ want me putting CM on this device.

If you want to risk bricking/soft bricking, then don't try it. The d2att version might work, but it also might not. And yeah, AT&T bugs me too with their super slow updates and the soon to be added Samsung Knox for the 4.3 update

You know guys, it's a pretty easy phone to deal with once you rack your brain for a night and understand everything. No use for CM installer.

polobunny said:
You know guys, it's a pretty easy phone to deal with once you rack your brain for a night and understand everything. No use for CM installer.
Click to expand...
Click to collapse
I agree completely. This device is perhaps one of the easiest I have rooted. It is easier now than it was a year ago.
While I like CM, I foresee some problems coming up because even with the process made "simple", someone will screw it up royally. I'm of the mind that if you don't know how to do it and don't want to take the time to read up and learn how to do it properly, you should not be rooting and installing a custom Rom whatever the means of doing so.
Sent from my Inspire 4G using xda app-developers app

Not sure where else to post about it but I'll ask here.
I've successfully rooted my Rogers GS3 using the how-to section and installed CWM and installed version 5.5.0.4 just fine. But things started acting up once I tried to install CM 10.2 nightly and CM 10.1 stable. (From what I've read the Rogers GS3 is supposed to be treated exactly like the AT&T version) During the flash I got a status 7 error something something getprop assert error. Search around the forums and one solution was to get rid of some lines of code in the actual ROM itself. Tried that, still same error.
So I tried downloading the newest version of CWM off their site but it was a .img file rather than a odin flashable .tar.
Using the tool here http://forum.xda-developers.com/showthread.php?t=2281287 To convert the .img to .tar and while the file converted properly odin said the recovery was invalid.
So I was stuck for about a week stressing out about it and CM installer app/Desktop client came out which was pretty cool. Opened it up and it says it's not applicable to this phone. Don't know where else to go but no where at all with this.

[Q] Virgin Mobile Samsung Galaxy S3 Question

Hello everybody!!
My friend gave me his Virgin mobile Samsung Galaxy S3 to root and install a custom ROM on. I have install the latest TWRP recovery, and flashed the Super SU. I am not rooted on stock. I was wondering how to go about installing a custom ROM. I think that the Virgin Mobile and the Sprint are very similar, but I noticed something on the ROMs posted in the development forum. For example, http://forum.xda-developers.com/showthread.php?t=2750674 shows that it is meant to work on versions with NJ2 and ND8. My S3 here has NJ3. I am wondering what this means. I have NJ3 on my S3, and I was wondering that meant. Does it mean that it is different version completely, or does it mean that it simply says that because it is Virgin Mobile and is still pretty much the same thing? That being said, would that ROM work on my S3 with NJ3?
Thanks everybody for your help and development to make this community awesome!

Okay, well I installed it anyways. It works great, but I need to find the APNs for Virgin Mobile. If someone can point that out to me, I would really appreciate it. Virgin Mobile US internet.

Jayfeather787 said:
Okay, well I installed it anyways. It works great, but I need to find the APNs for Virgin Mobile. If someone can point that out to me, I would really appreciate it. Virgin Mobile US internet.
Click to expand...
Click to collapse
Here's the APN fix. You flash the zip in a custom recovery: http://androidforums.com/threads/vi...rgin-mobile-apn-fix-wip-cm-aosp-4-4-x.840298/ My Virgin Mobile SIII is on NJ3, and the APNs work fine. NJ3, ND8, etc is just the modem. AFAIK it allows for connecting to the network, and newer modems have better connections. Any d2spr ROM should work fine on Virgin Mobile SPH-L710 (NOT SPH-L710T, be careful) if you flash the APN fix.
---------- Post added at 09:40 PM ---------- Previous post was at 09:37 PM ----------
Jayfeather787 said:
Hello everybody!!
I have install the latest TWRP recovery, and flashed the Super SU.
Click to expand...
Click to collapse
Did you use some modified version of TWRP? The normal official version can't mount partitions properly. I tried installing it and sh*t hit the fan. I had to use a gummified version of TWRP 2.8.0.0.

Thanks for the reply! I found the same problem, and I installed CWM. I did the APN fix, but mobile data won't work. Do I now have to put the APNs for the data to work?

No, after you flash the fix in recovery, everything should be taken care of. Sometimes you might have to flash it a few times to get it to stick, I suppose. The only thing I can think of to recommend is to make sure you follow the instructions and give the FAQs a read. That should explain evertything you need to do.
As a side note, here's a link to the Gummified TWRP that I'm using, in case you want TWRP (I personally prefer TWRP over CWM/PhilZ). You can just install it using the dd method with a terminal emulator on your phone using the instructions on the TWRP site. It's the TWRP 2.8.0.0.img. https://drive.google.com/folderview?id=0B1mtB5XM-ndHQThQX08xRWFVSzQ#

Thanks for the APN fix for Virgin Mobile. I just updated to CM12.1 on my S3 and had no data until I applied this fix.

Thanks so much, I will give that a try! I flashed it once, and it did not work. I will try flashing it a couple times in order to get it to work.

Are you trying to flash an android 5.1 ROM? Sh*t hit the fan on cm12.1 and all ROMs using cm as a base, and the APN fix doesn't have LTE on 5.1. If you want stability, I'd just go with a kitkat d2lte ROM. This bug is getting worked out, though. They just fixed it on cm, I think

Yep, I found that out the hard way lol. Thanks anyways, I will let my friend back it up, and I will just install kitkat on it. Thanks for your help.

You could also install a touchwiz ROM like wicked s5 for stability, but if you ask me, half the reason to root is to get away from touchwiz

Touchwiz must die.

Hi, guys!
I have a friend who also has a VM S3, and, of course, I told him he could have a way better Android experience if he let me help him put Cyanogenmod on it. He agreed to it, liking the idea of revitalizing his phone, and I went right ahead to the XDA forums to do some research. I came across this thread (obviously), and while it was immensely helpful (thank you everyone who contributed and provided links), it has got some out of date information and a few things gone unmentioned. So, I'll briefly compile a list of everything I know here to save future VM S3 modders some trouble and headache.
1) The latest TWRP (as of right now, it's 3.0.2-0) does work on the VM S3. Whatever issue was there in older versions is taken care of.
2) It is true that one will need to flash the APN fix linked in previous comments. That will get mobile data working.
3) However, in the very article linked, one will also see a Stock MMS fix, because even with the APN fix, the stock AOSP messaging app (in our case, that of Cyanogenmod 12.1) will not receive MMS. However, as users have commented in that forum, DO NOT flash that Stock MMS fix on anything above Android 4.4.4. As I discovered the hard way, it will only result in bootloop, as well as much headache and angst.
4) So, how do we fix the MMS glitch? Directly, there's no way (that I know of/can find). What I ended up doing for my friend was, when installing GAapps, I used the Aroma installer (because why wouldn't I?), and I had it install Google's Messenger app (in Aroma, it's labeled as just "Messenger"), and I had it block the installation of the Stock CM Messenger app. MMS now works fine.
5) Not a fan of Google Apps, or specifically Google's Messenger? Well, I hear Textra is good too. :fingers-crossed:
6) For the comment by @Powered_By_Linux on the issue concerning not getting LTE, I cannot say for certain as I no longer have my friend's phone with me, and I didn't think to test it. However, I know this: the comment was made in April 2015, and the snapshot release of CM12.1 is dated for November 2015, so I imagine it's possible something got fixed in between, as he said. Also, my friend hasn't complained to me yet about any sort of service problems (only praise for his rejuvenated phone), so I'm going to assume everything's working as it should. Also, there are other users in the linked APN fix article also saying their 4G/LTE works.
Again, thank you everyone who commented and provided links, as this thread was of great help to me. Here's to keeping those S3s alive and going strong!