Develop Bugs

CWM recovery for KARBONN A18!!!

CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
BUGS / Not functioning features :
Backing up the data not working
USB mount SDCARD through recovery not working
Credits:
I, Me & Myself..
EDIT:
i have tried removing some bugs, try and tell me u all!!!
I have also included the stock recovery.img file in the attatchment for people who want the stock recovery.
********************Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!*********************
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:

Good Job done
Built from source or using web builder?

i cant flash this through sp - tool
vshlkmr said:
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Credits:
I, Me & Myself..
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Click to expand...
Click to collapse
while downloading i got the error

reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
First Check if the MTK drivers are installed, check it by going tinto the device managers hardware section in my computer
If it is proper then try connecting your phone without the battery inserted

Same problem..
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
I'm facing the same problem.. I tried with battery in and out.. have installed the drivers as well..

i ported this recovery from a ZOPO Z900 Leader chinese android handset...i tried building from source, but i failed at it because of partition style in a18...
For people facing problems flashing it through sp tools, u all can try to flash it using another pc or alternatively view this youtube video -> http://www.youtube.com/watch?v=969xwsUTkSY

ujjwalk308 said:
I'm facing the same problem.. I tried with battery in and out.. have installed the drivers as well..
Click to expand...
Click to collapse
Same problem here.

Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!

vshlkmr said:
Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!
Click to expand...
Click to collapse
Ok.now waiting for the bugfix.

reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
always usb cable error
Connect usb cable & discconet auto & charging mode
this is usb driver ????

great job. im a noob at this so will try after people posting have successfully ported the cwm to their phone

There are two recovery.img files in your attachments. recovery.img and cwmfinal.img. Which one should be used in sp flash tool?

I recently purchased Karbonn a21, can I try this on it?
Sent from my GT-I9300 using xda app-developers app

Thnx bro worked like a charm.
Sent from my Karbonn_A18 using xda app-developers app

fail root
plz send device manager screen shot

Can anyone please upload stock rom of karbonn a18. My device stock at boot animation screen.
Sent from my GT-P1000 using xda premium

reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
same problem any help pz

Cwm flashed
I have successfully installed cwm on my karbonn a18.
I did it wit the help of mobileunckle tools.
What are the next motives now??
1) can we change the battery indicator at the notification area to percentage signs?

vshlkmr said:
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
BUGS / Not functioning features :
Backing up the data not working
USB mount SDCARD through recovery not working
Credits:
I, Me & Myself..
EDIT:
i have tried removing some bugs, try and tell me u all!!!
I have also included the stock recovery.img file in the attatchment for people who want the stock recovery.
********************Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!*********************
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Click to expand...
Click to collapse
will you please give CWM for Micromax A90 specification maybe same as A18
here is Specification
Micromax A90
Super Amoled Plus LCD with 262 k
MTK6575 CPU 1 Ghz
512 MB RAM (350 - 400) User available
512 MB ROM ( its not RAM ) for apps
2.5 GB external SD for media file ( Music/Video,,,etc.)
8 Mega Pixel Camera + 0. Mega Pixel Front Camera
Android OS 4.0.3
with Rooted cell
plz help us to create new CWM + Custom ROM
also its same specification from some Chinese Brand like Zoppo / Hero / Gionnee / HDC
plz help.

Pritesh.mohan said:
I have successfully installed cwm on my karbonn a18.
I did it wit the help of mobileunckle tools.
What are the next motives now??
1) can we change the battery indicator at the notification area to percentage signs?
Click to expand...
Click to collapse
You could do that before flashing Cwm aswell.. Use rom toolbox.. I did it the day I got this phone

ALCATEL ot 918n (2.3.5 / 2.3.6) how to ROOT and install CWM RECOVERY for NOOB

NOTE: READ with UNDERSTANDING and CAREFULLY FOLLOW THE STEPS INDICATED BELOW
IM NOT HELD RESPONSIBLE IF SOMETHING BAD HAPPENED TO UR PHONE
GOT IT? GET IT? GOODDDDDDDDD!!!!!... ^_^
*****Installing Custom Recovery for Unrooted / Rooted Phones*****
REQUIREMENTS:
DOWNLOAD THIS >>>>>>>>>> https://www.dropbox.com/s/z71f7ao9wio6vvi/download this.zip
note --->> extract all the RAR files in DOWNLOAD THIS folder
1. Android Usb Driver (PDA Net)
2. Android MT65xx PreLoader driver (xp/vista/7)
3. Android MT65xx Vcom driver (xp/vista/7) use this in case if PreLoader won't work
4. Alcatel One Touch Installer (use this IN CASE MT65xx PreLoader and Vcom drivers doesn't work)
5. SP Flash Tool
6. SCATTER FILE
7. RRECOVERY IMG FILE
8. USB DATA CABLE of your phone
9. YOUR DEVICE
10. USB DEBUGGING ENABBLED on your device -->>> (Settings > Application > Development > USB debugging)
***************************************************************************
HOW TO:
1. Install Android USB Driver (PDAnet).
2. Turn off your phone. Then connect your phone via usb data cable.
>>> [ a ] Then an unknown device will appear instantly, it will disappear and then it will reappear. Right click on it and choose to update driver manually. Now locate the folder where your Android MT65xx PreLoader is. Then press OK / Next. If prompt, choose “INSTALL DRIVER ANYWAY” OR
>>> [ b ] Find new software mt65xx preloader. Then choose install the software from a list. Now locate the folder where your Android MT65xx PreLoader is.
**NOTE: If nothing happens after plugging then boot to recovery by TURn OFF first your ddevice then PRESS and HOLD POWER + VOL UP Button then see your notification area on your desktop then follow either [a] or above.
- Done. Now disconnect your phone from the computer. And make it sure that your phone is turned off before proceeding to step 3..
3. Extract downloaded files to one folder for easy locating of the files. Open SP Flash Tool. Then choose scatter loading.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Look and find the scatter text file and open it.
note: the ver of scatterfile to choose should be the same ver of your device ( ex. ur device is 2.3.6 the you should choose 2.3.6 scater file)
5. Ignore and tick OK.
6. Check the box with the name "Recovery". Then look for the downloaded recovery file.
And open it.
7. Tick Option from the menu and check USB Mode.
8. Tick the Download button. Note: Look at the image carefully before ticking the download button. Make it sure nothing else is checked.
9. Plug your cellphone via your usb cable. Then wait for it to be finish.
***NOTE: If your phone isn’t detected after plugging then boot to recovery by PRESSING + HOLD POWER + VOL UP Button THEN go back to step 2. or try to install Alcatel Android Manager
10. A yellow bar will appear. Wait for it to reach 100%.
11. Done. Congratulations. You successfully installed a "CUSTOM RECOVERY".
*****Rooting the phone******
Requirements:
- Unrooted Phone
- Accomplished the method above. Or a Custom Recovery is already Installed
- SuperUser Zip file
>>>>>>> http://www.4shared.com/rar/a0y6F3s6/superuser.html
password:
akosikhyla
How to:
1. Copy and paste the downloaded zip file to the root of your SD Card.
2. Turn Off your phone and open custom recovery by pressing and holding Power Button + Volume Up.
3. Install zip from sdcard
4. Choose zip from sdcard.
5. Choose the file downloaded. (Superuser zip file)
Then confirm update.(choose YES -Install SuperUser)
6. Reboot.
7. Look for an icon with an Android Face named "SuperUser".
8. Done. Congratulations. Your phone is now rooted.
when your done on the steps above you should UPDATE your cwm recovery( this is important for flashing CUSTOM ROMS..etc)
>>>> follow the steps below:
*****CWM RECOVERY by SIR MARK
----->>>
https://www.dropbox.com/s/c6gryly8x1nxu9w/CMW_recovery_by_mark.zip
1.place the zip file(CWM_recovery_by_mark.zip) to sd card
2.go to recovery mode (vol up+power)
3.select "install zip from sdcard" then select "chose zip from sdcard"
4.locate the CWM_recovery_by_mark.zip then choose yes
5.wait until installing process done "!"
6.reboot.. DONE
---------------------------------->>>>>>>>> (optional)
CWM RECOVERY of SERGEY
http://www.4shared.com/zip/ijDqcind/recovery_2_3_5-6-signed.html
**************
POSSIBLE PROBLEMS THAT you MIGHT ENCOUNTER
PROB: paRtition change... etc
ANS: possible you used wrong SCATTER FILE
PROB: your device is undetectable
ANS: might be on the USB PORT or not SUCCESSFUL in installing the driver
for more possible QUESTIONS and ANSWERS go here;
>>>>>>> https://www.facebook.com/groups/237...m/groups/237333346380882/doc/446069185507296/
*********
there ur good to flash any kind of roms u want.. CREDITS to those who made the files... ^_^
****CREDIT to SIR RAIN of Symbianize
to Obcenity for the real creator of Tutorial
to Jbazt_katuforzs for the Flash Tutorial
dont forget to say THANKS

zatanika said:
NOTE: READ with UNDERSTANDING and CAREFULLY FOLLOW THE STEPS INDICATED BELOW
IM NOT HELD RESPONSIBLE IF SOMETHING BAD HAPPENED TO UR PHONE
GOT IT? GET IT? GOODDDDDDDDD!!!!!... ^_^
*****Installing Custom Recovery for Unrooted / Rooted Phones*****
REQUIREMENTS:
DOWNLOAD THIS >>>>>>>>>> https://www.dropbox.com/s/ucdvhqlefmktgna/download this.zip
1. Android Usb Driver (PDA Net)
2. Android MT65xx PreLoader driver (xp/vista/7)
3. Android MT65xx Vcom driver (xp/vista/7) use this in case if PreLoader won't work
4. Alcatel One Touch Installer (use this IN CASE MT65xx PreLoader and Vcom drivers doesn't work)
5. SP Flash Tool
6. SCATTER FILE
7. RRECOVERY IMG FILE
8. USB DATA CABLE of your phone
9. YOUR DEVICE
10. USB DEBUGGING ENABBLED on your device -->>> (Settings > Application > Development > USB debugging)
***************************************************************************
HOW TO:
1. Install Android USB Driver (PDAnet).
2. Turn off your phone. Then connect your phone via usb data cable.
>>> [ a ] Then an unknown device will appear instantly, it will disappear and then it will reappear. Right click on it and choose to update driver manually. Now locate the folder where your Android MT65xx PreLoader is. Then press OK / Next. If prompt, choose “INSTALL DRIVER ANYWAY” OR
>>> [ b ] Find new software mt65xx preloader. Then choose install the software from a list. Now locate the folder where your Android MT65xx PreLoader is.
**NOTE: If nothing happens after plugging then boot to recovery by PRESSING HOLD POWER + VOL UP Button then see your notification area on your desktop then follow either [a] or above.
- Done. Now disconnect your phone from the computer. And make it sure that your phone is turned off before proceeding to step 3..
3. Extract downloaded files to one folder for easy locating of the files. Open SP Flash Tool. Then choose scatter loading.
4. Look and find the scatter text file and open it.
5. Ignore and tick OK.
6. Check the box with the name "Recovery". Then look for the downloaded recovery file.
And open it.
7. Tick Option from the menu and check USB Mode.
8. Tick the Download button. Note: Look at the image carefully before ticking the download button. Make it sure nothing else is checked.
9. Plug your cellphone via your usb cable. Then wait for it to be finish.
***NOTE: If your phone isn’t detected after plugging then boot to recovery by PRESSING + HOLD POWER + VOL UP Button THEN go back to step 2. or try to install Alcatel Android Manager
10. A yellow bar will appear. Wait for it to reach 100%.
11. Done. Congratulations. You successfully installed a "CUSTOM RECOVERY".
*****Rooting the phone******
Requirements:
- Unrooted Phone
- Accomplished the method above. Or a Custom Recovery is already Installed
- SuperUser Zip file
>>>>>>> http://www.4shared.com/zip/EahpxSml/Superuser-312_-efghi-signed.html
How to:
1. Copy and paste the downloaded zip file to the root of your SD Card.
2. Turn Off your phone and open custom recovery by pressing and holding Power Button + Volume Up.
3. Install zip from sdcard
4. Choose zip from sdcard.
5. Choose the file downloaded. (Superuser zip file)
Then confirm update.(choose YES -Install SuperUser)
6. Reboot.
7. Look for an icon with an Android Face named "SuperUser".
8. Done. Congratulations. Your phone is now rooted.
****CREDIT to SIR RAIN of Symbianize
to Obcenity for the real creator of Tutorial
to Jbazt_katuforzs for the Flash Tutorial
when your done on the steps above FLASH CMW RECOVERY by MARK, its universal CMW recovery for CUSTOMIZED ROM
*****CWM RECOVERY by SIR MARK
----->>>
https://www.dropbox.com/s/dfvth3ep9o8bu1u/CMW_recovery_by_mark.zip
1.place the zip file(CWM_recovery_by_mark.zip) to sd card
2.go to recovery mode (vol up+power)
3.select "install zip from sdcard" then select "chose zip from sdcard"
4.locate the CWM_recovery_by_mark.zip then choose yes
5.wait until installing process done "!"
6.reboot.. DONE
---------------------------------->>>>>>>>> (optional)
CWM RECOVERY of SERGEY
------> after accomplishing the steps above DL this zip file >>>>> https://www.dropbox.com/s/3d1umegiill2s3s/recovery_2_3_5-6-signed.zip
-------> put it on the root of ur sdcard then flash it
*turn off your device , vol up+power, > install zip frm sd > chose zip file then flash it..
**************
POSSIBLE PROBLEMS THAT you MIGHT ENCOUNTER
PROB: paRtition change... etc
ANS: possible you used wrong SCATTER FILE
PROB: your device is undetectable
ANS: might be on the USB PORT or not SUCCESSFUL in installing the driver
for more possible QUESTIONS and ANSWERS go here;
>>>>>>> https://www.facebook.com/groups/237...m/groups/237333346380882/doc/446069185507296/
*********
there ur good to flash any kind of roms u want.. CREDITS to those who made the files... ^_^
dont forget to say THANKS
Click to expand...
Click to collapse
thank ypu so much your tut 100% works in my alcatel one touch 918N ,,,,

diordna_j said:
thank ypu so much your tut 100% works in my alcatel one touch 918N ,,,,
Click to expand...
Click to collapse
glad to help.. ^_^

password for superuser.rar

working fine, thank you

flipsonder29 said:
password for superuser.rar
Click to expand...
Click to collapse
password: akosikhyla

Help! After putting the downloaded zip file to my SD Card then turned off the phone and reboot by pressing the power button + volume up it displays the android symbol and Im stuck with it. Basically i cant open my phone. How can i fix this problem? please help!

ginger09 said:
Help! After putting the downloaded zip file to my SD Card then turned off the phone and reboot by pressing the power button + volume up it displays the android symbol and Im stuck with it. Basically i cant open my phone. How can i fix this problem? please help!
Click to expand...
Click to collapse
wew..why on earth u put the downloaded files on your sdcard? what files you put on it?

help
zatanika said:
NOTE: READ with UNDERSTANDING and CAREFULLY FOLLOW THE STEPS INDICATED BELOW
IM NOT HELD RESPONSIBLE IF SOMETHING BAD HAPPENED TO UR PHONE
GOT IT? GET IT? GOODDDDDDDDD!!!!!... ^_^
*****Installing Custom Recovery for Unrooted / Rooted Phones*****
REQUIREMENTS:
DOWNLOAD THIS >>>>>>>>>> https://www.dropbox.com/s/ucdvhqlefmktgna/download this.zip
note --->> extract all the RAR files in DOWNLOAD THIS folder
1. Android Usb Driver (PDA Net)
2. Android MT65xx PreLoader driver (xp/vista/7)
3. Android MT65xx Vcom driver (xp/vista/7) use this in case if PreLoader won't work
4. Alcatel One Touch Installer (use this IN CASE MT65xx PreLoader and Vcom drivers doesn't work)
5. SP Flash Tool
6. SCATTER FILE
7. RRECOVERY IMG FILE
8. USB DATA CABLE of your phone
9. YOUR DEVICE
10. USB DEBUGGING ENABBLED on your device -->>> (Settings > Application > Development > USB debugging)
***************************************************************************
HOW TO:
1. Install Android USB Driver (PDAnet).
2. Turn off your phone. Then connect your phone via usb data cable.
>>> [ a ] Then an unknown device will appear instantly, it will disappear and then it will reappear. Right click on it and choose to update driver manually. Now locate the folder where your Android MT65xx PreLoader is. Then press OK / Next. If prompt, choose “INSTALL DRIVER ANYWAY” OR
>>> [ b ] Find new software mt65xx preloader. Then choose install the software from a list. Now locate the folder where your Android MT65xx PreLoader is.
**NOTE: If nothing happens after plugging then boot to recovery by TURn OFF first your ddevice then PRESS and HOLD POWER + VOL UP Button then see your notification area on your desktop then follow either [a] or above.
- Done. Now disconnect your phone from the computer. And make it sure that your phone is turned off before proceeding to step 3..
3. Extract downloaded files to one folder for easy locating of the files. Open SP Flash Tool. Then choose scatter loading.
4. Look and find the scatter text file and open it.
note: the ver of scatterfile to choose should be the same ver of your device ( ex. ur device is 2.3.6 the you should choose 2.3.6 scater file)
5. Ignore and tick OK.
6. Check the box with the name "Recovery". Then look for the downloaded recovery file.
And open it.
7. Tick Option from the menu and check USB Mode.
8. Tick the Download button. Note: Look at the image carefully before ticking the download button. Make it sure nothing else is checked.
9. Plug your cellphone via your usb cable. Then wait for it to be finish.
***NOTE: If your phone isn’t detected after plugging then boot to recovery by PRESSING + HOLD POWER + VOL UP Button THEN go back to step 2. or try to install Alcatel Android Manager
10. A yellow bar will appear. Wait for it to reach 100%.
11. Done. Congratulations. You successfully installed a "CUSTOM RECOVERY".
*****Rooting the phone******
Requirements:
- Unrooted Phone
- Accomplished the method above. Or a Custom Recovery is already Installed
- SuperUser Zip file
>>>>>>> http://www.4shared.com/rar/a0y6F3s6/superuser.html
password:
akosikhyla
How to:
1. Copy and paste the downloaded zip file to the root of your SD Card.
2. Turn Off your phone and open custom recovery by pressing and holding Power Button + Volume Up.
3. Install zip from sdcard
4. Choose zip from sdcard.
5. Choose the file downloaded. (Superuser zip file)
Then confirm update.(choose YES -Install SuperUser)
6. Reboot.
7. Look for an icon with an Android Face named "SuperUser".
8. Done. Congratulations. Your phone is now rooted.
when your done on the steps above you should UPDATE your cwm recovery( this is important for flashing CUSTOM ROMS..etc)
>>>> follow the steps below:
*****CWM RECOVERY by SIR MARK
----->>>
https://www.dropbox.com/s/dfvth3ep9o8bu1u/CMW_recovery_by_mark.zip
1.place the zip file(CWM_recovery_by_mark.zip) to sd card
2.go to recovery mode (vol up+power)
3.select "install zip from sdcard" then select "chose zip from sdcard"
4.locate the CWM_recovery_by_mark.zip then choose yes
5.wait until installing process done "!"
6.reboot.. DONE
---------------------------------->>>>>>>>> (optional)
CWM RECOVERY of SERGEY
http://www.4shared.com/zip/ijDqcind/recovery_2_3_5-6-signed.html
**************
POSSIBLE PROBLEMS THAT you MIGHT ENCOUNTER
PROB: paRtition change... etc
ANS: possible you used wrong SCATTER FILE
PROB: your device is undetectable
ANS: might be on the USB PORT or not SUCCESSFUL in installing the driver
for more possible QUESTIONS and ANSWERS go here;
>>>>>>> https://www.facebook.com/groups/237...m/groups/237333346380882/doc/446069185507296/
*********
there ur good to flash any kind of roms u want.. CREDITS to those who made the files... ^_^
****CREDIT to SIR RAIN of Symbianize
to Obcenity for the real creator of Tutorial
to Jbazt_katuforzs for the Flash Tutorial
dont forget to say THANKS
Click to expand...
Click to collapse
Have a nice evening.
Please us your re-upload or another file sharing site in the http://forum.xda-developers.com/show...3162&nocache=1 page before you upload "download this.zip" file since it would need.
Thank you.

^_^
links updated.. ^_^

zatanika said:
links updated.. ^_^
Click to expand...
Click to collapse
DOWNLOAD THIS >>>>>>>>>> https://
www.dropbox.com/s/z71f7ao9wi...oad%
20this.zip - download not working. update please

thanks are you ako si khyla ?
thanks for this are you ako si kyla alcatel group?:fingers-crossed:

my phone just keeps on rebooting
what happened?

*****Rooting the phone******
Requirements:
- Unrooted Phone
- Accomplished the method above. Or a Custom Recovery is already Installed
- SuperUser Zip file
How to:
1. Copy and paste the downloaded zip file to the root of your SD Card.
2. Turn Off your phone and open custom recovery by pressing and holding Power Button + Volume Up.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I strictly followed all the rules but when I opened custom recovery, it stuck on the android logo (the start-up screen) for an hour.
can you please help me?

zatanika said:
links updated.. ^_^
Click to expand...
Click to collapse
i was stuck at step 3! huhuh my computer can't install my phone's driver, what shall i do?

zatanika said:
NOTE: READ with UNDERSTANDING and CAREFULLY FOLLOW THE STEPS INDICATED BELOW
IM NOT HELD RESPONSIBLE IF SOMETHING BAD HAPPENED TO UR PHONE
GOT IT? GET IT? GOODDDDDDDDD!!!!!... ^_^
*****Installing Custom Recovery for Unrooted / Rooted Phones*****
REQUIREMENTS:
DOWNLOAD THIS >>>>>>>>>> https://www.dropbox.com/s/z71f7ao9wio6vvi/download this.zip
note --->> extract all the RAR files in DOWNLOAD THIS folder
1. Android Usb Driver (PDA Net)
2. Android MT65xx PreLoader driver (xp/vista/7)
3. Android MT65xx Vcom driver (xp/vista/7) use this in case if PreLoader won't work
4. Alcatel One Touch Installer (use this IN CASE MT65xx PreLoader and Vcom drivers doesn't work)
5. SP Flash Tool
6. SCATTER FILE
7. RRECOVERY IMG FILE
8. USB DATA CABLE of your phone
9. YOUR DEVICE
10. USB DEBUGGING ENABBLED on your device -->>> (Settings > Application > Development > USB debugging)
***************************************************************************
HOW TO:
1. Install Android USB Driver (PDAnet).
2. Turn off your phone. Then connect your phone via usb data cable.
>>> [ a ] Then an unknown device will appear instantly, it will disappear and then it will reappear. Right click on it and choose to update driver manually. Now locate the folder where your Android MT65xx PreLoader is. Then press OK / Next. If prompt, choose “INSTALL DRIVER ANYWAY” OR
>>> [ b ] Find new software mt65xx preloader. Then choose install the software from a list. Now locate the folder where your Android MT65xx PreLoader is.
**NOTE: If nothing happens after plugging then boot to recovery by TURn OFF first your ddevice then PRESS and HOLD POWER + VOL UP Button then see your notification area on your desktop then follow either [a] or above.
- Done. Now disconnect your phone from the computer. And make it sure that your phone is turned off before proceeding to step 3..
3. Extract downloaded files to one folder for easy locating of the files. Open SP Flash Tool. Then choose scatter loading.
4. Look and find the scatter text file and open it.
note: the ver of scatterfile to choose should be the same ver of your device ( ex. ur device is 2.3.6 the you should choose 2.3.6 scater file)
5. Ignore and tick OK.
6. Check the box with the name "Recovery". Then look for the downloaded recovery file.
And open it.
7. Tick Option from the menu and check USB Mode.
8. Tick the Download button. Note: Look at the image carefully before ticking the download button. Make it sure nothing else is checked.
9. Plug your cellphone via your usb cable. Then wait for it to be finish.
***NOTE: If your phone isn’t detected after plugging then boot to recovery by PRESSING + HOLD POWER + VOL UP Button THEN go back to step 2. or try to install Alcatel Android Manager
10. A yellow bar will appear. Wait for it to reach 100%.
11. Done. Congratulations. You successfully installed a "CUSTOM RECOVERY".
*****Rooting the phone******
Requirements:
- Unrooted Phone
- Accomplished the method above. Or a Custom Recovery is already Installed
- SuperUser Zip file
>>>>>>> http://www.4shared.com/rar/a0y6F3s6/superuser.html
password:
akosikhyla
How to:
1. Copy and paste the downloaded zip file to the root of your SD Card.
2. Turn Off your phone and open custom recovery by pressing and holding Power Button + Volume Up.
3. Install zip from sdcard
4. Choose zip from sdcard.
5. Choose the file downloaded. (Superuser zip file)
Then confirm update.(choose YES -Install SuperUser)
6. Reboot.
7. Look for an icon with an Android Face named "SuperUser".
8. Done. Congratulations. Your phone is now rooted.
when your done on the steps above you should UPDATE your cwm recovery( this is important for flashing CUSTOM ROMS..etc)
>>>> follow the steps below:
*****CWM RECOVERY by SIR MARK
----->>>
https://www.dropbox.com/s/c6gryly8x1nxu9w/CMW_recovery_by_mark.zip
1.place the zip file(CWM_recovery_by_mark.zip) to sd card
2.go to recovery mode (vol up+power)
3.select "install zip from sdcard" then select "chose zip from sdcard"
4.locate the CWM_recovery_by_mark.zip then choose yes
5.wait until installing process done "!"
6.reboot.. DONE
---------------------------------->>>>>>>>> (optional)
CWM RECOVERY of SERGEY
http://www.4shared.com/zip/ijDqcind/recovery_2_3_5-6-signed.html
**************
POSSIBLE PROBLEMS THAT you MIGHT ENCOUNTER
PROB: paRtition change... etc
ANS: possible you used wrong SCATTER FILE
PROB: your device is undetectable
ANS: might be on the USB PORT or not SUCCESSFUL in installing the driver
for more possible QUESTIONS and ANSWERS go here;
>>>>>>> https://www.facebook.com/groups/237...m/groups/237333346380882/doc/446069185507296/
*********
there ur good to flash any kind of roms u want.. CREDITS to those who made the files... ^_^
****CREDIT to SIR RAIN of Symbianize
to Obcenity for the real creator of Tutorial
to Jbazt_katuforzs for the Flash Tutorial
dont forget to say THANKS
Click to expand...
Click to collapse
:good: thank you so much your thread is very 100% works device :fingers-crossed:

heeelllllpppp urgent
Help! After putting the downloaded zip file to my SD Card then turned off the phone and reboot by pressing the powerbutton + volume up it displays theandroid symbol and Im stuck withit. Basically i cant open my phone. How can i fix this problem?please help!

i m facing problem
Hi
I haved followed the above procedure mentioned by u, but since then i m not getting incoming calls and and the home button also stopped working, i dont know where i made mistake but plz help me coz this is my friends phone as he was facing low memory problem so by having faith on xda i took his phone to root it and uninstall unwanted apps to free up some space.
I also tried flashing two different custom roms but it goes in boot loop and i also flashed it with stock rom again boot loop problem.
Plz hel me its urgent i had to return this phone to my friend.

My phone USB is broken. Is there any way to install recovery, or root phone from sdcard, or any other method?

pano gagawin ko ?
kuya/ate pano po ito ? natapos ko nmn po yung sa may custom recovery pero kpag nag(vol up + power) di nmn nag iba yung recovery boot :3

Alcatel One touch X'pop 5035D Issue

Hello ,
Yesterday I tried to flash my Alcatel One touch X'pop 5035D using this tips
http://forum.xda-developers.com/showthread.php?t=2284347
"Currently there are 3 custom recovery's available (CWM/TWRP/COT), the installation of the recovery's are all the same.
Download and extract the above files (MTK droid Root & Tools & SP FlashTool)
Choose your preffered custom recovery
Put this folder in the MtkDroidTools\backups.
Start the Flash tool
Press the button at the right called "Scatter-Loading"
Go to that folder and look for the file called "MT6577_Android_scatter_emmc" And press open.
You will be returned to the Flash program, you might wanna extend the size of the application so you can see all the files that are loaded.(like Preloader/DSP_BL/MBR up till ANDROID)
Now uncheck all those boxes, so dont forget the ANDROID one.
Check Recovery and click on recovery, it should open another windows where you have to choose your recovery. Now pick the recovery you have chosen to use..
Once you done that, go do download and press yes on the upcoming error. Shut your phone off and connect your phone with USB to the phone. Now it should turn red to yellow and should copy the recovery to the phone. At the end you should see a green ring. (you might need to put out the battery and back in again to let it be recongized)
Press power and the volume button (+) to get in to the custom recovery.
Once succeeded use the volume buttons to navigate to the option reboot and press the power button. This should restart your phone and eventually you will be returned to Android"
I do it carefully but when I finished it , my phone opened once time and still turned of until now , and after that did not recognize it Laptop using USB cable
I used this recovery
"Clockworkmod
https://mega.co.nz/#F!TZxFTSKA!UsJc8CY9i3sI0T6iE-a3hQ "
and tools in this links
MTK droid Root & Tools
http://dfiles.eu/files/uivp7rw4e
SP FlashTool
http://www.mediafire.com/?agsj3n4neniq054
P.S : Sorry about my bad language ^^

100%&100% working ROOT TWRP Recovery & bootloop restart solution LeTV Le1s x507&x509

100%&100% working ROOT TWRP Recovery & bootloop restart solution LeTV Le1s x507&x509
TWRP Recovery & root & bootloop restart
solution LeTV Le1s x507&x509 Indian Version
No more brick and bootloop problem
100%tested solution 8s&14s​
New Method added
18/05/2016
Backup all internal storage
install pdanet and preloder driver​https://drive.google.com/file/d/0By_LtpUoEtFzUDNZLW9JeHhhNnc/view
http://pdanet.co/a/​
restart pc
Download new Rar file​https://drive.google.com/file/d/0B5KBP3GG99Q2aU1wNnYwakliUHM/view?usp=sharing?​Extract folder Desktop
Go to mobile settings >> About Phone >>
tap Version 7 Times and hit back
U will have a new option just
above the About Phone option called Developer Options
open it and select USB Debugging
Connect the mobile with pc through USB cable
how to unlock bootloder
duble click recovery bat press any key to enter fastboot mode
After it Reboots
close cmd.exe
press shift+right click select open command windows here
Type fastboot oem unlock HIT ENTER
press volume up confirm NOW THE BOOTLOADER IS UNLOCKED
how to install recovery
duble click recovery bat
press A key to Flash recovery img
again press a akey
switch off the mobile press 10 second power key
now mobile is boot loop
dont worry
open sp tool and flash user data
connect ur mobile Screen blank condition and wait for the process to finish
done
Remove usb cable
Most important
after flash userdata dont power on mobile
press volume up+power
first boot
leave both key showing letv logo
How To root
Start the mobile open twrp folder copy the Superuser.zip file to memory
Go to updater app and select reboot to recovery
select Install select superuser.zip swipe to install
done
Q.I completed the procedure as mentioned in tutorial, everything goes well even sptool download, but when I boot to recovery mode to install supersu the phone boots to stock recovery mode and not the twrp mode. Tried atlest ten times but same problem. How I can boot to twrp mode
Answer .after flash userdata dont power on mobile
press volume up+power first boot
leave both key showing letv logo
Video tutorial​​https://www.youtube.com/watch?v=v9X-a1DmU-g​

naeem210 said:
TWRP Recovery & root & bootloop restart
solution LeTV Le1s x507 Indian Version
No more brick and bootloop problem
100%tested solution
New Method added
24/04/2015
Twrp.3.0
Backup all internal storage
install pdanet and preloder driver
https://drive.google.com/file/d/0By_LtpUoEtFzUDNZLW9JeHhhNnc/view
http://pdanet.co/a/
Download new Twrp Rar file
https://drive.google.com/file/d/0B5KBP3GG99Q2NUpJSGVhWlB3X1E/view
Extract twrp folder Desktop
Go to mobile settings >> About Phone >>
tap Version 7 Times and hit back
U will have a new option just
above the About Phone option called Developer Options
open it and select USB Debugging
Connect the mobile with pc through USB cable
duble click recovery bat press any key to enter fastboot mode
After it Reboots
close cmd.exe
press shift+right click select open command windows here
Type fastboot oem unlock HIT ENTER
press volume up confirm NOW THE BOOTLOADER IS UNLOCKED
duble click recovery bat
press A key to Flash recovery img
again press a akey
switch off the mobile press 10 second power key
now mobile is boot loop
dont worry
open sp tool and flash user data
connect ur mobile Screen blank condition and wait for the process to finish
done
How To root
Start the mobile open twrp folder copy the Superuser.zip file to memory
Go to updater app and select reboot to recovery
select Install select superuser.zip swipe to install
done
Video tutorial
http://forum.le.com/in/index.php?th...-solution-letv-le1s-x507-new-method-add.1155/
Click to expand...
Click to collapse
Working!! Thanx

Hi , The Sp Tool does not show any progress at all.
I watched the video , connected the phone while it was blank , still SP tool remains stuck in Download forever and the phone keep looping.
Please help thanks
I tied in Windows 10 as well as Windows 7 64bit

csifreeman said:
Hi , The Sp Tool does not show any progress at all.
I watched the video , connected the phone while it was blank , still SP tool remains stuck in Download forever and the phone keep looping.
Please help thanks
I tied in Windows 10 as well as Windows 7 64bit
Click to expand...
Click to collapse
Nevermind, I used the new method you posted , which was x509 and it worked.
Thanks

compatible with Le 1s Eco?
will this method work with LeEco Le 1s Eco version - Le X509 aswell?

Can u give me stock recovery.img please of le eco 1s x509

can install on x501?

strangely i didnt have to flash the user data..maybe because i am in official marshmallow rom

By unlocking bootloader waranty will void?

What is the new method?
csifreeman said:
Nevermind, I used the new method you posted , which was x509 and it worked.
Thanks
Click to expand...
Click to collapse
What is the new method? As my phone is bricked after I used thus now can't do anything, any advice please.

If any one have le 1s related problem and solution or any one want to try new rom or kernal asap then all of u are welcome in our group on telegram so plz join with us
Requriemt
1. Download telegram from play store
2. Just click below link
https://telegram.me/LeSuperGroup
Thanks all of u

otg support or not tell me fast ?????

Twrp
How to install Twrp in letv le1s x507 Android 5.0.2 (Eui 5.5.008S?

Prabhmeet13 said:
How to install Twrp in letv le1s x507 Android 5.0.2 (Eui 5.5.008S?
Click to expand...
Click to collapse
If u want to use custom ROM or Chinese version upgraded version of ROM then u have to upgrade you official ROM version from lollipop to marshmallow (eui 19s) if you don't want to do that and happy with lollipop ROM and stick with it then u have to install kingroot app for rooting mobile ROM
Then install twrp app or fleasify from ply store
Then download twrp version 2.8.6or7 or otherwise 3.0.2
Image file
If you use twrp official app then find with code name x3 (le 1s eco) then application demand u certain permission then do so rest app can do automatically
If u use fleashify then download official twrp image file rename it to recovery. Img. And place such file into ur SD card or internal storage openly (not put such file into any folder )
Rest process can do the app itsalf if you open the app just follow procedure as app demand u
If u have any problem in above process just search in you tube
You can find both app application process
Thanks for read out such long post

sumitgp said:
If u want to use custom ROM or Chinese version upgraded version of ROM then u have to upgrade you official ROM version from lollipop to marshmallow (eui 19s) if you don't want to do that and happy with lollipop ROM and stick with it then u have to install kingroot app for rooting mobile ROM
Then install twrp app or fleasify from ply store
Then download twrp version 2.8.6or7 or otherwise 3.0.2
Image file
If you use twrp official app then find with code name x3 (le 1s eco) then application demand u certain permission then do so rest app can do automatically
If u use fleashify then download official twrp image file rename it to recovery. Img. And place such file into ur SD card or internal storage openly (not put such file into any folder )
Rest process can do the app itsalf if you open the app just follow procedure as app demand u
If u have any problem in above process just search in you tube
You can find both app application process
Thanks for read out such long post
Click to expand...
Click to collapse
when i boot in recovery only show LETV logo and after automatically reboot phone normally i didn't see any recovery in my phone what can i do?

Im not able to flash user data.. actually i unlocked bootloader in my le1s and wen im clicking on boatloder option in twrp it shows device verification failed ur device might work impropely..not able to flash userdata in sp tool option kindly guide me
Sent from my Le X507 using Tapatalk

asif2017 said:
Im not able to flash user data.. actually i unlocked bootloader in my le1s and wen im clicking on boatloder option in twrp it shows device verification failed ur device might work impropely..not able to flash userdata in sp tool option kindly guide me
Click to expand...
Click to collapse
Bro just PM to naneem bro
Just go to 1st page of this trend and click on naeem profile u found PM tab

brom error s_brom_download_da_fail (2004)

nice

Kk

Nextbook ares 11 nxa116qc164

How do I install remix on Nextbook ares 11 official build

Remix might be a NO-GO! Windows Rooting Easy!
Peggya said:
How do I install remix on Nextbook ares 11 official build
Click to expand...
Click to collapse
Message me for the link to the .zip file.
1) FULLY CHARGE YOUR NEXTBOOK!
2) Extract NXA11_root_kit.zip to C:\NXA116QC164
3) Install IntelAndroidDrvSetup1.10.0.exe
4) Copy SuperSU.zip to your micro SD card (Do not install it into the Tablet yet)
5) Open CMD as Administrator in Windows (Right click run as administrator)
6) In CMD (Command Prop) Type cd C:\NXA116QC164
7) Power off your NextBook completely press and hold the Volume Down and Power buttons at the same time until the NextBook logo apears and then let go of the power button and continue holding the power down button until it boots into the bootloader
8) Connect your tablet to the Windows computer with the micro USB data cable
9) In CMD type fastboot flash recovery twrp.img
10) Install the SD card to your tablet and disconect the USB cable and connect keyboard/touchpad
11) Using Volume down select Recovery Mode and press the Power Button
12) Using the touchpad on the attached keyboard click on Wipe Click on Format Data Type yes Click Go
13) Click the Home Icon on the bottom left Click on Install
14) Select SuperSU.zip (You may have to select external storage and navigate to find it, Swipe to Confirm Flash
15) Click the Home button and go to Wipe, swipe the do a Factory Reset
16) Reboot System (First Boot will take a while but it will work)
***What to do if you have no SD-Card***
1) Do all the above step skipping the SD-Card steps once booted into the system and Download the UPDATE-SuperSU-v2.82-20170528234214.zip from Chainfire to your downloads folder
2) Power off your NextBook completely press and hold the Volume Down and Power buttons at the same time until the NextBook logo apears and then let go of the power button and continue holding the power down button until it boots into the bootloader Using Volume down select Recovery Mode and press the Power Button
3) Click on Install Select UPDATE-SuperSU-v2.82-20170528234214.zip (You may have to select internal storage and navigate to Downloads to find it, Swipe to Confirm Flash
4) Reboot System
Message me for the link to the .zip file.
---------- Post added at 08:36 PM ---------- Previous post was at 08:32 PM ----------
Peggya said:
How do I install remix on Nextbook ares 11 official build
Click to expand...
Click to collapse
Contact info: [email protected]

Update Remix OS
Peggya said:
How do I install remix on Nextbook ares 11 official build
Click to expand...
Click to collapse
Once you completed rooting look for a file or link to a zip file named Ares8_NXA8QC116_RemixOS_v2.0-20161115.zip copy it to an sd card and install it using TWRP recovery. I did this to mine and it seems to work well so far. it boots and only been on it 5 minutes but good so far.
---------- Post added at 10:09 AM ---------- Previous post was at 09:15 AM ----------
My Tablet in a NXA116QC164 and the Remix I pointed out does indead work. The zip file i used in twrp came grom this post https://www.google.com/amp/s/forum....rt-remix-os-2-0-nextbook-ares-8-t3498015/amp/