Develop Bugs

[How to] Boot ALL Jellybean sense roms on cid unsupported devices

General Information
Since everything here is on fire because of the sense jellybean leaked firmware and many are crying that they do not have the appropriate CID to flash the new firmware, and some also replied to my post they are not able to boot with that UNOFFICAL and BETA METHOD i decided to write this short guide.
At first, i do not think that the rom flashed with this method is working as a daily for you, more a preview for when the devs found a way to bring the update also to carrier branded phones.
Things that are reported to work with trips 3.4.11 kernel but not with his 3.1.10 kernel are:
- Usb storage ( )
Things that will not work are:
- Sound
- Youtube App
- Wifi Dropouts, not for me but another person mentioned it
This method does not update your hboot. So you´re safe to go back. And one more time, this is just meant as a preview for now, so dont expect the full jellybean experience. be lucky that we have trip and can at least boot this
So here will be the general instructions for all jellybean sense roms.
1. Download your favourite jellybean sense rom and put it on your sdcard
A few of them:
ARHD: http://forum.xda-developers.com/showthread.php?t=1562603 (not available for now)
IC: http://forum.xda-developers.com/showthread.php?t=1588669
Maximus: http://forum.xda-developers.com/showthread.php?t=1601543
Ordroid: http://forum.xda-developers.com/showthread.php?t=1836919
2. Download trips kernel from here: http://tripndroid.bindroidroms.com/TripNDroid_RVISED_3.4.11-002.zip put one copy on your phones sdcard and one on your pc
3. Repack trips boot.img found in the previously downloaded .zip with the ramdisk from the kernel which is included in your rom that you downloaded in the first step using this nice little tool: http://forum.xda-developers.com/showthread.php?t=1815607
Put the repacked boot.img in your fastboot folder
4. Boot your phone into fastboot mode and flash the repacked boot.img you downloaded using following commands
------> fastboot flash boot boot.img
------> fastboot erase cache
5. after this boot into custom recovery and perform a full wipe (including system, data, cache, dalvik)
6. flash your rom (just in case: tick none of the options in aroma)
7. flash modules from trips kernel which you placed in step 2 on your sdcard
8. boot into your jellybean preview.
Credits to shnizlon for the rom, to TripNRaVeR for his 3.1.10 kernel that offers this possibility , finally to chrisoverson for online repacker
I´m not responsible for anything you do to your phone!

hi
im on CID 38 it is not supported as of now
by doing ur process u mean i can flash any of the JB roms
kindly tell me if the process done right it its ok
as i dont wana brick my phone cant afford another one as of now
can u kindly confirm that u have done it and it works:good:

Anyone have try it.. still waiting
Sent from my HTC One X using xda premium

it work ! Wifi work with screen on.

haree said:
hi
im on CID 38 it is not supported as of now
by doing ur process u mean i can flash any of the JB roms
kindly tell me if the process done right it its ok
as i dont wana brick my phone cant afford another one as of now
can u kindly confirm that u have done it and it works:good:
Click to expand...
Click to collapse
Hi a few people have confirmed that it works, but there are some bugs as stated in the op, so you can give it a try to see what all the fuss is about and so that you don't have to feel totally left out, but currently it can't really be used as a daily driver

bernyfur said:
it work ! Wifi work with screen on.
Click to expand...
Click to collapse
Are sure? Did you try it?
Sent from my HTC One X using xda premium

Already try it one the day 2.0.0 out.. but the most i hate is no in call sound.
about sd bug, I think it is because of vold.fstab, as the sd mount is different as ICS, that why it not detected in JB.

I tried this last night, and YES it does work.
However it's pretty unusable and i ended up flashing back to viperX. Still it was nice to sample Jelly Bean.
I'm on T-MOB005 UK

iamaniff said:
Are sure? Did you try it?
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Every JB sense rom boot using trip kernel, just repack it and flash.. Already try all JB ROM, but no fun for me, as it is too buggy for unsupported CID.
@OP : Why don't you change the thread to "how to flash Sense JB on unsupported CID device" as it could boot all JB Sense ROM.

haree said:
hi
im on CID 38 it is not supported as of now
by doing ur process u mean i can flash any of the JB roms
kindly tell me if the process done right it its ok
as i dont wana brick my phone cant afford another one as of now
can u kindly confirm that u have done it and it works:good:
Click to expand...
Click to collapse
iamaniff said:
Anyone have try it.. still waiting
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
iamaniff said:
Are sure? Did you try it?
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
i did it exactly as i described in the op yesterday in the evening and there were the bugs i explained above
your hboot is not upgraded while youre doing this procedure so you can easily flash back
and i also mentioned it´s most likely only for preview!

I try it my cid is t-mob101 and it work Sense jelly bean is nice but i have the Radio Bug..it works only if the screen is on...when it is locked and i turn it on i have Signal Bars but in lockscreen it shows no signal...it is Bad...but the hole rom is nice ..i hope someone fix the bugs
Sent from my HTC One X using xda premium

Stay with ics :thumbup:
Sent from my HTC One X using xda premium

nashshafrulrezza said:
Every JB sense rom boot using trip kernel, just repack it and flash.. Already try all JB ROM, but no fun for me, as it is too buggy for unsupported CID.
@OP : Why don't you change the thread to "how to flash Sense JB on unsupported CID device" as it could boot all JB Sense ROM.
Click to expand...
Click to collapse
it could but the boot.img i provided is only for ordroid. i don´t think it will boot with insertcoin or arhd as they made custom ramdisk modifications. But you´re right, basically if you repack trips kernel with the jb sense roms kernel ramdisk it will boot i think
I will update the thread in the evening i´m busy now because i have to break up my grandmother´s garden that sounds funny and i hope it´s correct

iamaniff said:
Are sure? Did you try it?
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
yes ! jb is amazing!

Freak07 said:
i did it exactly as i described in the op yesterday in the evening and there were the bugs i explained above
your hboot is not upgraded while youre doing this procedure so you can easily flash back
and i also mentioned it´s most likely only for preview!
Click to expand...
Click to collapse
hi
thanks for ur kind reply :good::laugh:
as i have just got my official 2.17 india and i cant fine the ruu or the stock recovery for this rom i think i wont take my chances now and wait for the above or the Off JB update :laugh:

bernyfur said:
yes ! jb is amazing!
Click to expand...
Click to collapse
Sent from my HTC One X using xda premium

haree said:
hi
thanks for ur kind reply :good::laugh:
as i have just got my official 2.17 india and i cant fine the ruu or the stock recovery for this rom i think i wont take my chances now and wait for the above or the Off JB update :laugh:
Click to expand...
Click to collapse
why you need RUU or stock recovery? This is the same way to flash custom rom with our own choice kernel.

nashshafrulrezza said:
why you need RUU or stock recovery? This is the same way to flash custom rom with our own choice kernel.
Click to expand...
Click to collapse
Precise! Just make nandroid, follow my instructions, and afterwards Flash Boot.img from your nandroid and restore your nandroid
Sent from my HTC One X using xda premium

Freak07 said:
Precise! Just make nandroid, follow my instructions, and afterwards Flash Boot.img from your nandroid and restore your nandroid
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
hi
now the stock recovrey av right now is 1.29
after i do the nand flash of the 2.17 off i need the stock recovery for this one right the above wont work right ie if i want to go back to stock and get the offcial OTA when it does come do correct me if im wrong

haree - What state is your phone in now? i.e. Is your bootloader unlocked?

[Q] Please Help! Trouble with updating to Jellybean

Hello this is my first post and I come to request some help.
I have a htc one v and was trying to update to jelly bean through steps from Android Authorty's guide
After completing this set of instructions I booted up my phone and sadly all I got was a htc screen with the red writing which then turned black and nothing happened after that.
Im pretty worried right now, I dont have much knowledge about androids and I have but a clue as to what I have just done.
Is it permanently damaged? How do i fix this or atlest restore it to the factory state.
Please help!

so-up said:
Hello this is my first post and I come to request some help.
I have a htc one v and was trying to update to jelly bean through steps from Android Authorty's guide
After completing this set of instructions I booted up my phone and sadly all I got was a htc screen with the red writing which then turned black and nothing happened after that.
Im pretty worried right now, I dont have much knowledge about androids and I have but a clue as to what I have just done.
Is it permanently damaged? How do i fix this or atlest restore it to the factory state.
Please help!
Click to expand...
Click to collapse
the red letters r normal if u have rooted. as for back to stock just restore ur original back up file you should of created.......... say u made a nandroid backup didnt u

have you flashed the kernel, that is the boot.img from fastboot?????

mihirengg19 said:
have you flashed the kernel, that is the boot.img from fastboot?????
Click to expand...
Click to collapse
which kernel, dude he just rooed the phone no ROM yet! :\

cybervibin said:
which kernel, dude he just rooed the phone no ROM yet! :\
Click to expand...
Click to collapse
learn to read. he stated:
I have a htc one v and was trying to update to jelly bean through steps from Android Authorty's guide
Click to expand...
Click to collapse
as for the OP: make sure you also flash the KERNEL for the respective rom. it is not enough to install only the ROM. You need also the kernel because we currently have S-ON devices.

cybervibin said:
which kernel, dude he just rooed the phone no ROM yet! :\
Click to expand...
Click to collapse
@1ce he changed the title today, yest it was help! :|

@cybervibin U need to learn to read dude... and yes d approp. kernel(boot.IMG) flashed is very imp. as icebox stated above...
Sent from my One V using xda app-developers app

I guess there is some thing wrong with my xda app...having problems with it:banghead::banghead::banghead:
Sent from my One V using xda premium

O I see...
Sent from my One V using xda app-developers app

sbkjuggalo said:
the red letters r normal if u have rooted. as for back to stock just restore ur original back up file you should of created.......... say u made a nandroid backup didnt u
Click to expand...
Click to collapse
Hey thanks yes i have tried to restore the nandroid and nothing happened still have the same result when trying to boot up my phone

1ceb0x said:
learn to read. he stated:
as for the OP: make sure you also flash the KERNEL for the respective rom. it is not enough to install only the ROM. You need also the kernel because we currently have S-ON devices.
Click to expand...
Click to collapse
Ok thanks i actually dont remember doing this step, but is there a way for me to strat over i feel like i have created a huge mess of my phone and i just really want to start new

To start over, u should have the stock kernel. U have restored the stock nandroid then u must flash stock kernel...or it will not boot...
Did u flash the kernel at time of installing JB??
Sent from my One V using xda app-developers app

mihirengg19 said:
To start over, u should have the stock kernel. U have restored the stock nandroid then u must flash stock kernel...or it will not boot...
Did u flash the kernel at time of installing JB??
Sent from my One V using xda app-developers app
Click to expand...
Click to collapse
is flashing the kernel when you install the zip files on the sd card using clockwork?
if so yes i have done this

so-up said:
is flashing the kernel when you install the zip files on the sd card using clockwork?
if so yes i have done this
Click to expand...
Click to collapse
no. flashing kernel is where u flash the boot.img from fastboot. if u do not flash the kernel. your rom wont boot. btw which rom were u installing??

mihirengg19 said:
no. flashing kernel is where u flash the boot.img from fastboot. if u do not flash the kernel. your rom wont boot. btw which rom were u installing??
Click to expand...
Click to collapse
Oh ok yes i did do that and the rom was aokpc_primoc_unoffical
But how can I restore my phone to the original state?

Don't forget to make a backup with CWM or what ever recovery you use.

served24 said:
Don't forget to make a backup with CWM or what ever recovery you use.
Click to expand...
Click to collapse
Hey i just tried to do this and got error while making backup image of /system

OK so i figured out that i am truly a noob.
I was attempting to install the CDMA version when i needed GSM.
Proud of myself for solving this i went to install the gsm version but sadly now i only get the htc screen with red writing.
It dosent change from there.
Have i done permanent damage because i installed the CDMA version!?

now im getting something really weird my phone goes to the htc screen with red writing then shuts off by itself and then turns on again by itself in a endless cycle of this red writing htc screen.

so-up said:
now im getting something really weird my phone goes to the htc screen with red writing then shuts off by itself and then turns on again by itself in a endless cycle of this red writing htc screen.
Click to expand...
Click to collapse
Alright... let's get your phone fixed!
I assume you have:
1. Unlocked bootloader
2. Installed a recovery
3. Installed a custom CDMA ROM
4. Then installed a GSM ROM
5. Now phone keeps rebooting?
Is that correct?

[Q] Cyanogenmod help needed

Hey people.
I'm completely noob into all this, I'm currently using the myONEv_RC5.0.fx for my HTC One V. But It has gone so slow.
I flashed Titanium kernel which allowed me to overclock upto 2.16 GHz. But its not helping me thought.
I wanted to flash cyanogenmod on my device. What should i do? From where do i get the Cyanogenmod 10 for my One V?
Plus how to flash CM10 compatible kernel? Somebody please help me with this, my phone has gone so slow. :crying: :crying:

rohanclassic said:
Hey people.
I'm completely noob into all this, I'm currently using the myONEv_RC5.0.fx for my HTC One V. But It has gone so slow.
I flashed Titanium kernel which allowed me to overclock upto 2.16 GHz. But its not helping me thought.
I wanted to flash cyanogenmod on my device. What should i do? From where do i get the Cyanogenmod 10 for my One V?
Plus how to flash CM10 compatible kernel? Somebody please help me with this, my phone has gone so slow. :crying: :crying:
Click to expand...
Click to collapse
Don't be lazy dude.. Read d forum. http://forum.xda-developers.com/showthread.php?t=1835285. Now you can find out which kernel you require from here.

ivanrvf said:
Don't be lazy dude.. Read d forum. http://forum.xda-developers.com/showthread.php?t=1835285. Now you can find out which kernel you require from here.
Click to expand...
Click to collapse
Thanks dude.. this is what i did,
I made a nandroid backup..
Copied the cm_primou-ota-eng.Lloir.zip onto the SD card
Booted the device in recovery, wiped the cache and did a factory reset and selected INSTALL .zip FROM SD CARD.. Its just showing cyanogemod animation and nothing happened for atleast 4-5 hours!
Am i doing anything wrong? Please help..

IIRC, you need the Hellboy kernel for cm10.

Do a nandroid backup FIRST.
1.put ROM is sdcard's root.
2. Put boot.img in fastboot folder.
3. Boot into bootloader,from there select fastboot and flash kernel in fastboot.
4. Then go into recovery and do full wipe and then install ROM.
5. Boot into ROM and then again boot into recovery and then flash gapps.
Download this kernel and flash it-
http://www.mediafire.com/?lo2ctaplonbdh
Select this kernel from the list-
boot-HELLBOY-201212251747.img
Flash the kernel using this command-
fastboot flash boot boot.img.
Refer this guide-
http://forum.xda-developers.com/showthread.php?t=1996665
Sent from my One V using xda app-developers app

rohanclassic said:
Its just showing cyanogemod animation and nothing happened for atleast 4-5 hours!
Click to expand...
Click to collapse
4-5 hours!!!???? U serious dude....!!" just wait for 5 min. Aprox. And if nothing happen..... u did something wrong..... btw, when u flashed cm, u must have read the thread..... it provide all the useful info. About rom....

Thanks people!
Flashed the hellboy kernel.. and flashed Paranoid Android.. Its working flawlessly now.. Thanks to all of you once again! :angel:

Just for the record, do NIT overclock over 1.4 GHz/1.5GHz. You will make your phone suffer. :thumbup:
Sent from my One V using Tapatalk 2

It does not damage the phone in any way!just at 1.9 or 2 GHz it reboots
Sent from my One V using xda app-developers app

I recommend MySense RC2.0 Lite.Boot file, and only hellboy Hellboy sense

[Q] Cant Flash Jelly Bean ROMS anymore [SOLVED]

hi..i have been trying out different ROMS and have been successfull at doing it.
when i first rooted my phone i flashed PACman v15, used it for a while and then kept flashing different ROMs
I then flashed [ROM-PrimoU|GSM] [18.3.13] myONEv RC9.5 FX+ (Sense 4.1 Lite), which also booted correctly..
i then decided to flash another jelly bean ROM. however none of the ROMs available are able to boot.
I also flashed the appropriate kernel, wiped everything, nothing works.. kept getting boot loops.
so nw m back to [ROM-PrimoU|GSM] [18.3.13] myONEv RC9.5 FX+ (Sense 4.1 Lite) this ROM.
could anyboody tell me what i could be doing wrong?

tell the procedure how you switch to other rom ?

gulsher said:
tell the procedure how you switch to other rom ?
Click to expand...
Click to collapse
1) took backup in twrp
2) wiped everything
3) flashed ROM in sd card
(step 3 and 4 were also interchanged cause i read somewhere, looking for solutions to this, that u need to flash kernel first then ROM )
4) rebooted into bootloader -flashed appropriate kernel
5) reboot system.
6) bootloop occured!

ninad.mt said:
1) took backup in twrp
2) wiped everything
3) flashed ROM in sd card
(step 3 and 4 were also interchanged cause i read somewhere, looking for solutions to this, that u need to flash kernel first then ROM )
4) rebooted into bootloader -flashed appropriate kernel
5) reboot system.
6) bootloop occured!
Click to expand...
Click to collapse
Some roms also depend on recovery you are using did you try flashing using cwm..??
I am nt sure wheather it will work but you can try this.

myOne will work will work with twrp
Just Flash the kernel INSIDE ROM ZIP FILE

Pranav Sharma (PS) said:
Some roms also depend on recovery you are using did you try flashing using cwm..??
I am nt sure wheather it will work but you can try this.
Click to expand...
Click to collapse
Earlier i had flashed all jb ics roms on twrp only.. each time it worked well.
Seraz007 said:
myOne will work will work with twrp
Just Flash the kernel INSIDE ROM ZIP FILE
Click to expand...
Click to collapse
myOne is booting.. jellybean ROMs seems to be a problem

ninad.mt said:
myOne is booting.. jellybean ROMs seems to be a problem
Click to expand...
Click to collapse
sorry misunderstood
which ROM are u trying to flash exactly?

Seraz007 said:
sorry misunderstood
which ROM are u trying to flash exactly?
Click to expand...
Click to collapse
[JDQ39][4.2.2][GSM] Evervolv *AOSP* 3.2.0 [BETA][PMEM][20130511]
[ROM]{WIP}[GSM][4.2.2] PACman v20.1.0 | All-In-One | PA-3.1 | AOKP-JB-MR1| CM10.1 (v15, v19a)
[AOSPA 4.2.2 JDQ39] PARANOIDANDROID 3.1x [beta][08/03/2013]

ninad.mt said:
[JDQ39][4.2.2][GSM] Evervolv *AOSP* 3.2.0 [BETA][PMEM][20130511]
[ROM]{WIP}[GSM][4.2.2] PACman v20.1.0 | All-In-One | PA-3.1 | AOKP-JB-MR1| CM10.1 (v15, v19a)
[AOSPA 4.2.2 JDQ39] PARANOIDANDROID 3.1x [beta][08/03/2013]
Click to expand...
Click to collapse
PARANOID ANDROID is not booting for some people as well
for Evervolv have u flashed the correct kernel? try this one http://www.mediafire.com/?s9arad4h3ppydy9
havent tried Pacman

Seraz007 said:
PARANOID ANDROID is not booting for some people as well
for Evervolv have u flashed the correct kernel? try this one http://www.mediafire.com/?s9arad4h3ppydy9
havent tried Pacman
Click to expand...
Click to collapse
I have flashed various versions of PACman before, 15a,19a,19.3a..
yes.. i flashed that kernel only..
will try on a friends one v and will revert back!

strange really

Seraz007 said:
strange really
Click to expand...
Click to collapse
Seriously have no clue!!

dont know why but i think that it has something to do with recovery ..coz i also change roms frequently.. currently running evervolv and it booted without any problem i flashed the kernel mentioned in the op then the rom...(after wiping everything cache,data,dalvik cache through cwm)
and it was a success..

ninad.mt said:
1) took backup in twrp
2) wiped everything
3) flashed ROM in sd card
(step 3 and 4 were also interchanged cause i read somewhere, looking for solutions to this, that u need to flash kernel first then ROM )
4) rebooted into bootloader -flashed appropriate kernel
5) reboot system.
6) bootloop occured!
Click to expand...
Click to collapse
Have you ever used pimpMyRom or such apps to do some tweaks?
Sent from my HTC T320e using xda app-developers app

[email protected]@ said:
Have you ever used pimpMyRom or such apps to do some tweaks?
Sent from my HTC T320e using xda app-developers app
Click to expand...
Click to collapse
yeah.. i did install pimpMyROM once.. but didnt make any tweaks..and simply uninstalled it.
can apps like these be a problem while flashing?

ninad.mt said:
yeah.. i did install pimpMyROM once.. but didnt make any tweaks..and simply uninstalled it.
can apps like these be a problem while flashing?
Click to expand...
Click to collapse
I don't know if it will create any problem or not. But i had once issue like that.
I installed PimpMyRom and did some tweaks. After that i rebooted my phone and at that time my device gets soft bricked.
So i just thought it might be that issue.
Just try reflashing rescue package if u have downloaded it.
And if you are sure that u have not done any tweaks then its ok.
But the thing is that you are having a strange problem, so its worth a try.

[email protected]@ said:
I don't know if it will create any problem or not. But i had once issue like that.
I installed PimpMyRom and did some tweaks. After that i rebooted my phone and at that time my device gets soft bricked.
So i just thought it might be that issue.
Just try reflashing rescue package if u have downloaded it.
And if you are sure that u have not done any tweaks then its ok.
But the thing is that you are having a strange problem, so its worth a try.
Click to expand...
Click to collapse
i never made any tweaks.. so didnt even create a rescue package..

Are you flashing the kernel
Sent from my HTC One X+ using Tapatalk 2

had something like this too, factory reset, wipe dalvik cache, flash rom, flash kernel, done!
Sent from my One V using xda premium

ninad.mt said:
i never made any tweaks.. so didnt even create a rescue package..
Click to expand...
Click to collapse
OK.
Try out something I am out of solutions. And one thing after getting a solution post here what worked for you. :thumbup:
Sent from my HTC T320e

HurtSky' Kernel V3.3 problem .. plz help

hi ... i just downloaded the HurtSky' Kernel V3.3 on my galaxy wonder and did what exactly was said in this topic : http://forum.xda-developers.com/show....php?t=2204669
but my phone now refuse to work at all , after the samsung screen with cyanogenmod logo the device don`t show anything and keeps restarting ... i registered in the site to post about my problem in the topic above ... but because i`m new so i can not post ... please help me i don`t know what to do

Hum, try to flash the older kernel v3.2. You are using cm9 right?

ilusi0n_ said:
Hum, try to flash the older kernel v3.2. You are using cm9 right?
Click to expand...
Click to collapse
no i don`t ... should i ???
and now i formated everything .. but still the same and i can`t access to the phone

Your link doesn't work. I assume you were using this kernel right? http://forum.xda-developers.com/showthread.php?t=2204669
That kernel is just for cm9. There are different kernels for each version.

ilusi0n_ said:
Your link doesn't work. I assume you were using this kernel right? http://forum.xda-developers.com/showthread.php?t=2204669
That kernel is just for cm9. There are different kernels for each version.
Click to expand...
Click to collapse
this is the link : http://forum.xda-developers.com/showthread.php?t=2204669
sorry i don`t know much about these things ... so plz if u can tell me what to do step by step cause im really confused

You still didn't tell what version of cm you were using. As far as I know a wrong kernel flash can brick the phone. Though that stuff is beyond my knowledge so you should wait untill someone more qualified could answer you. I'm not sure if a simple flash rom would solve the problem.

ilusi0n_ said:
You still didn't tell what version of cm you were using. As far as I know a wrong kernel flash can brick the phone. Though that stuff is beyond my knowledge so you should wait untill someone more qualified could answer you. I'm not sure if a simple flash rom would solve the problem.
Click to expand...
Click to collapse
i was not using cm at all ... but i downloaded the CM9 rc9 .. and my phone start working again ... thnx for ur help

ah, so that was the problem. Glad everything worked out : D

Yes, that should fix. Bootloop occurs when our system crash. So, it cant be loaded. It is also called a softbrick. But it is not really dangerous, as we can simply flash back our rom back, as long it is save on your sdcard. Also you can restore nandroid backup. Nandroid backup is a backup for our system if our system crash. It can crash, if the rom we download did not aborted or something, our system should not be crash. That's why after every download, we need to verify the md5sum.
Sent from my CM10.1 Wonder using xda premium