Develop Bugs

Updating my SGY on custom rom

I hav creeds rom 2.1 nw if there is an update for gingerbread will my samsung galaxy y go back to the stock rom
Thanks

no, coz kies will never detect ur phone, so you cant update

ronnieryan said:
no, coz kies will never detect ur phone, so you cant update
Click to expand...
Click to collapse
And what if I update through mobile

reflash it to stock rom, then you can update again

jeffcleds said:
reflash it to stock rom, then you can update again
Click to expand...
Click to collapse
Can you please tell me hw I can do it
Thnkx

Follow what doky posted, find you're location firmware version here

this should have been posted under FAQs for Galaxy Y...

i can connect my phone to kies , it has creed's v2.0
i have same question, can i update via kies or OTA??

dhruvpandit said:
i can connect my phone to kies , it has creed's v2.0
i have same question, can i update via kies or OTA??
Click to expand...
Click to collapse
You cant! Flash to stock rom first! Before you can update on kies or OTA
Sent from my GT-S5360

problem with connecting in download mode galaxy gio

i installed cwm and cyanogenmod 10.1 w/ android ics for gio rom and now i want to get back to original stock rom but my computer doesnt recognize my gio when it is in download mode. the phone works perfectly but i dont really like the ics, thats why i want touchwiz and 2.3.6 version back! and yes, i have tried multiple cables and uninstalled and installed drivers, tried different computer and EVERYTHING

Dude just install a stock based rom like s'perience or adrenaline rom
Sent from my GT-S5660 using xda app-developers app

tcris45 said:
Dude just install a stock based rom like s'perience or adrenaline rom
Click to expand...
Click to collapse
thats the problem, i cant because my computer doesnt recognize my phone in download mode so i cant do the rom installation from odin.

Do you have a custom recovery installed? I can do both of the following for you: Send you a good custom recovery for the Gio and send you a custom recovery flashable .zip of the Galaxy Gio 2.3.6 Stock ROM. Though I wouldn't be able to do it right away (I can do it this weekend), how about it?

i have clockworkmod recovery installed. if you can and its not a problem i would love to have the flashable stock rom, i really appreciate that you want to help me )

ukleee said:
i installed cwm and cyanogenmod 10.1 w/ android ics for gio rom and now i want to get back to original stock rom but my computer doesnt recognize my gio when it is in download mode. the phone works perfectly but i dont really like the ics, thats why i want touchwiz and 2.3.6 version back! and yes, i have tried multiple cables and uninstalled and installed drivers, tried different computer and EVERYTHING
Click to expand...
Click to collapse
Your ops file is the real mess behind all this. Just rename it. Remove any model number from its name. For example:- (for mini) "S5570_TASS_v1.0.ops" is wrong. & the correct name is "TASS_v1.0.ops"
★Remember that Odin will display the model number of ur device in its title bar as soon as u place the correct ops file under OPS field regardless of whether the phone is physically connected to PC or not★
Sent Via XDA™ Premium

Galaxy_Rohit said:
Your ops file is the real mess behind all this. Just rename it. Remove any model number from its name. For example:- (for mini) "S5570_TASS_v1.0.ops" is wrong. & the correct name is "TASS_v1.0.ops"
★Remember that Odin will display the model number of ur device in its title bar as soon as u place the correct ops file under OPS field regardless of whether the phone is physically connected to PC or not★
Sent Via XDA™ Premium
Click to expand...
Click to collapse
my ops file says "GIO_v1.0.ops" do i remove the GIO from it?

ukleee said:
my ops file says "GIO_v1.0.ops" do i remove the GIO from it?
Click to expand...
Click to collapse
No No No... Not at all. It's correct(if model no. appears in Odin's title bar) You should check ur phone's drivers then or install them again on PC to get ur phone detected coz that's only the possible reason left then.
Sent Via XDA™ Premium

galaxy grand not getting detected on usb[SOLVED]

hi
when i connect my galaxy grand with usb the computer does not detects it.Windows does not ask for any driver installation.I have tried reinstalling samsung kies and drivers several times.restore the phone to factory settings,wipe all the cache ,tried switching usb debugging on and off but no help.but still it does not gets detected..What could be the problem.And how can i claim warranty.I can reset the counter to zero using triangle away.But the official status is custom.How do i remove it without flashing.I am on stock rom,rooted.It does not get detected in download mode also.
i tried using moborobo also but no use
[SOLVED] It was the connector issue.I cleaned the connector terminals with a pin and now it works like a charm

bansalayush said:
hi
when i connect my galaxy grand with usb the computer does not detects it.Windows does not ask for any driver installation.I have tried reinstalling samsung kies and drivers several times.restore the phone to factory settings,wipe all the cache ,tried switching usb debugging on and off but no help.but still it does not gets detected..What could be the problem.And how can i claim warranty.I can reset the counter to zero using triangle away.But the official status is custom.How do i remove it without flashing.I am on stock rom,rooted.It does not get detected in download mode also.
i tried using moborobo also but no use
Click to expand...
Click to collapse
Change the usb cable...
Sent from Gt-I9082 stock AMCD firmware

dude try changing the usb cable.

Tried with the new cable on different pc but the problem still persists.can CWM be used to flash the stock firmware so I can claim warranty
Sent from my GT-I9082 using xda app-developers app

bansalayush said:
Tried with the new cable on different pc but the problem still persists.can CWM be used to flash the stock firmware so I can claim warranty
Sent from my GT-I9082 using xda app-developers app
Click to expand...
Click to collapse
do u have a cwm backup of the official firmware.

yes i have a backup which i restored but cwm still remains.
now how can i change the system status to official and how to remove cwm
so that i can give my phone for repair

bansalayush said:
yes i have a backup which i restored but cwm still remains.
now how can i change the system status to official and how to remove cwm
so that i can give my phone for repair
Click to expand...
Click to collapse
R u sure the Samsung drivers are installed on your computer.. If not your phone will not very detected..
Sent from Gt-I9082 stock AMCD firmware

For removing cwm check out d videos at youtube...
Sent from my GT-I9082 using xda premium

Actually if your phone cannot be detected how do you flash CWM?
The only way to reset everything to official is, you must Reset the BIN counter using Triangle Away, then flash your country's official ROM through ODIN (which about 700++MB, very large).
After flash and setup your phone, everything will be revert to official. (Go into Download mode to check)

try using mobile odin to uninstall cwm.

It is certainly driver issue.
Try killing Kies (all related processes) before plugging your device.

soralz said:
Actually if your phone cannot be detected how do you flash CWM?
Click to expand...
Click to collapse
LOL-nobody noticed that you were able to root so after all you were connected via usb before? If so 3 things-
1. Your usb cable is defective.
2. Your grand usb connector is defective.
3. Your grand motherboard is defective
Sent from my GT-I9082 using xda app-developers app

soralz said:
Actually if your phone cannot be detected how do you flash CWM?
The only way to reset everything to official is, you must Reset the BIN counter using Triangle Away, then flash your country's official ROM through ODIN (which about 700++MB, very large).
After flash and setup your phone, everything will be revert to official. (Go into Download mode to check)
Click to expand...
Click to collapse
my phone is not getting detected so cannot use odin
Anyways I cleaned up the usb connector terminals with a pin and it worked

lol... thats horsecrap. It probably worked because you charged it.
For all the others looking for an answer to this, try charging the battery to more than 80% and then try again.
I noticed that while the phone is out of juice, its not detected in download mode.
Noticed the bug a while back.

[Q] Brick Gio 5/5 :D

i installed samsung galagy mini's CWM-recovery to samsung galaxy gio so my gio is now broken and going to trash if dont can fix it so is it possible to instal CWM-recovery with odin answer please D

NoGoodNameLeft said:
i installed samsung galagy mini's CWM-recovery to samsung galaxy gio so my gio is now broken and going to trash if dont can fix it so is it possible to instal CWM-recovery with odin answer please D
Click to expand...
Click to collapse
You can flash a stock system from Odin and flash CWM from its stock recovery.

Connect phone to pc, put your phone in download mode, open Odin: (https://db.tt/sBJggJ9w) click on one package and select this recovery: https://db.tt/3s64xA7R
Sent from my GT-S5660 using xda premium

I think your GIO is BOOTLOOP, try to search with google.. keyword is "Galaxy GIO BOOTLOOP"

Downgrading the Official Firmware...

Hi there...
I am on 4.2.2 official stock rom... Can i revert back to 4.1.2 official stock rom via Odin ?
Plz guide...

vatsalbh9 said:
Hi there...
I am on 4.2.2 official stock rom... Can i revert back to 4.1.2 official stock rom via Odin ?
Plz guide...
Click to expand...
Click to collapse
yes. just download 4.1.2 firmware from your country and search google on how to flash via Odin.
remember after successful flash, your phone will stuck at samsung logo, while at it just press and hold HOME+VOL-UP+POWER button
then factory reset, wipe dalvik, wipe cache and reboot system. enjoy 4.1.2 goodluck!

kaiserlourdes said:
yes. just download 4.1.2 firmware from your country and search google on how to flash via Odin.
remember after successful flash, your phone will stuck at samsung logo, while at it just press and hold HOME+VOL-UP+POWER button
then factory reset, wipe dalvik, wipe cache and reboot system. enjoy 4.1.2 goodluck!
Click to expand...
Click to collapse
Ok... So its like we r repairing a soft bricked fon...
Can u plz also give me/PM me link for the 4.1.2 official firmware...cz i cant find it... Links are removed...
Im from India...
Samsung Galaxy Grand Duos i9082
Sent from my GT-I9082 using XDA Free mobile app

vatsalbh9 said:
Ok... So its like we r repairing a soft bricked fon...
Can u plz also give me/PM me link for the 4.1.2 official firmware...cz i cant find it... Links are removed...
Im from India...
Samsung Galaxy Grand Duos i9082
Sent from my GT-I9082 using XDA Free mobile app
Click to expand...
Click to collapse
Here just search thru this
http://www.sammobile.com/firmwares/database/GT-I9082/INS/