Related
I RECENTLY PURCHASED A VOGUE ONLINE IT KEEPS RESETTING ITSELF TRIED NEW ROMS AND THE MINUTE I DISCONNECT THE USB CONNECTION IT RESETS ITSELF EVERY COUPLE OF MINUTES...HELP PLEASE..I WILL BE HERE ALL NIGHT
Alright.
1. Stop posting new threads about this! You are not the only one who has ever had a problem like this.
2. Post the link to where you got the original ROM.
3. Give us a DETAILED overview of what you did. The more you leave out, the less anyone can help.
4. Relax, these things can typically be fixed.
I think i have the wrong radio and it wont let me upgrade
JARVISLEROUGE said:
I think i have the wrong radio and it wont let me upgrade
Click to expand...
Click to collapse
Again, post more details!
You are only saying this because of the post in your other thread.
please forgive me i am a newbie and i am scared that i ruined my phone
i downloaded a new radio for the vogue but evidently it was a older version and i wasnt supposed to downgrade..now says "no radio"
i know that i must of broken some forum rules but it wont happen again.....I just need my phone back...
did you get it fixed?
still need help
STILL need help now my phone says no radio...no matter what rom i put on it..whats next? is this what they call bricked?
Did you try putting the phone into bootloader and flashing the stock ROM with radio?
Who is your provider?
taking steps forward....i think
i went back and reflashed radio 2.13.00 and now it is frozen at startup screen but the no radio is gone..
JARVISLEROUGE said:
i went back and reflashed radio 2.13.00 and now it is frozen at startup screen but the no radio is gone..
Click to expand...
Click to collapse
Who is your service with? I would like to find you the proper ROM.
sprint for now but want to flash to metro pcs...kinda want to prove that metro can handle a smartphone
thanks in advance
Flash it to radio 3.42.50, and install a proper Sprint ROM... you might as well have a working device than none at all.
can you send a link
please send me a link please
JARVISLEROUGE said:
sprint for now but want to flash to metro pcs...kinda want to prove that metro can handle a smartphone
thanks in advance
Click to expand...
Click to collapse
there are a few smart phones on metro flashed over...
UPDATE!!!!
Finally got the phone to boot
rom:1.12.651.1
radio:2.13.00
when i take it off the usb connection it shuts off after about 7 mins
so i either still have a radio conflict or i am just doomed with this phone...help me
WELL GO HERE FLASH OFFICAL UPGRADE...: http://www.htc.com/us/SupportDownloadList.aspx?p_id=76&cat=2 UPGRADE IS TO THE RIGHT UNDER DOWNLOAD...
THEN BEFORE YOU FLASH CUSTOM YOU NEED TO RUN IaMcOkEmAn'S UNLOCKER FOUND HERE :http://forum.ppcgeeks.com/showthread.php?t=20370 RUN2.31 BECAUSE AFTER THE OFFICAL UPGRADE YOU WILL BE GPS ENABLED...NOW LIKE I SAID SEARCH CUSTOMS!!!YOUR PHONE WILL BE A DIFFERENT DEVICE NOW...
Hoover is the man
Thanks hoover using nfsfans sprint 1.0 so far so good thank you so much you really helped me alot thanks for the patience....now whats next?:d
I have a simple question and i think ive seen some mention of it, but nothing quite definitive
I want to root my SGSIIX from Telus(989D), and ive figured out that i can follow the same instructions as the T-mobile version here:
http://forum.xda-developers.com/showthread.php?t=1332103
It suggests a ROM below that was originally posted for the T-mobile ver, is there any T-mobile branding on it visually such as boot screens etc?
Also...
If a ROM works flawlessly on the tmobile version, will it also work flawlessly on the telus version by default. Ive been eyeballing the possibility of Cyanogen or MIUI, and juggernaut...but i wanna make sure EVERYTHING works perfectly after doing so, or if there are certain things that might not work
Thanks! (sorry im rather new to android modding so im trying to learn)
And yes i searched around, but have only seen a few ppl post in threads saying 'it should work', then some say theyve had problems..so thought id make a post!
i have the same questions then you the tutorials i found are for the t-mobile rom
not the telus one but reading other post they are the same rom
but i dont whant to take the risk lol
rayman25 said:
i have the same questions then you the tutorials i found are for the t-mobile rom
not the telus one but reading other post they are the same rom
but i dont whant to take the risk lol
Click to expand...
Click to collapse
Same, specially since im new at this!
yes, they are identical software and hardware
i rooted the phone today there is alot of apps in the t-mobile version compare to the telus one I followed the instructions from this page
http://forum.xda-developers.com/showthread.php?t=1332103
the 4g network was gone could not connect to it only 3g was working
i uninstalled most apps with titanium backup pro but i end restoring to the back up i made from CWR
gonna give it another try when they are going to release a rom that is from telus version of the phone
i hope it helps you
The 4g is broken for me to ...it seems like the modders are only interested in the t-mobile version to, so it looks like even rooting(based on the fact that the rooted rom is also a t-mob) wont even be possible
Rekzer said:
The 4g is broken for me to ...it seems like the modders are only interested in the t-mobile version to, so it looks like even rooting(based on the fact that the rooted rom is also a t-mob) wont even be possible
Click to expand...
Click to collapse
What do you mean rooting? All you need to do is flash CWM and then the SU package, no need to change any ROM at all.
I rooted my Telus device using the T-Mobile instructions and all was well at home, it stayed on the Telus network and also keep 4G speed.
I went to work with it, where Telus service is very poor, and as soon as I lost Telus it roamed to Rogers and did not try and return to Telus even though I was in an area where Telus signal was good.
In the end I changed the device to wcdma mode only and set the device to manual provider and selected Telus and have had no problems with 4G or not being on Telus...
skadude66 said:
What do you mean rooting? All you need to do is flash CWM and then the SU package, no need to change any ROM at all.
Click to expand...
Click to collapse
Do you happen to have a link? I followed a guide on this forum that said the easiest way was to flash the rom!
I rooted my phone, it still said 4G.
When I installed beastMOD it says 3G. But I am definitely getting 4G speeds (20mbps). So.. maybe a bug with the difference in phones?
ughhh
trust me...stick with the telus rom. its actually better code then tmob. newer drivers and less debug code. I tried the tmob and its gawd aweful. if u want goodies...slap a kernel on it then theme it. best way to go imho.
Later
Chand.
haha, i only know how to follow step by step's for this stuff
i can only hope ppl switch over to the telus code i guess
Im trying to find how to root w/o flashing a rom though
Rekzer said:
haha, i only know how to follow step by step's for this stuff
i can only hope ppl switch over to the telus code i guess
Im trying to find how to root w/o flashing a rom though
Click to expand...
Click to collapse
For Telus you don't need to change roms when you root.
I'm running the stock rom on my phone with a modified kernel to allow the phone to run faster and the v6 memory mod as well as removing the clock from notification bar.
Installed Titanium and removed a bunch of the crap that came stock with phone too.
firebane said:
For Telus you don't need to change roms when you root.
I'm running the stock rom on my phone with a modified kernel to allow the phone to run faster and the v6 memory mod as well as removing the clock from notification bar.
Installed Titanium and removed a bunch of the crap that came stock with phone too.
Click to expand...
Click to collapse
Do i install a kernel the same way i install a ROM? Aka through CWM? And if so,which do you use?
Rekzer said:
Do i install a kernel the same way i install a ROM? Aka through CWM? And if so,which do you use?
Click to expand...
Click to collapse
I was using Jugs kernel but I switched to Synergy and like it better.
And yes.. I just download it to my sd card and install it thru CWM
Rekzer said:
haha, i only know how to follow step by step's for this stuff
i can only hope ppl switch over to the telus code i guess
Im trying to find how to root w/o flashing a rom though
Click to expand...
Click to collapse
Get the recovery.tar from here: http://forum.xda-developers.com/showthread.php?t=1315390
Flash that through ODIN (PDA mode in ODIN, Download mode on Phone)
Then, place the SU update (http://goo-inside.me/superuser/su-3.0.5-efgh-signed.zip) on the root of the SD card. Reboot to recovery, select install zip from SD Card and select the SU update. Reboot and you're rooted without having to use another ROM.
The reason why you keep getting a 3G signal when you are getting 4G speeds is because you are using a T-Mobile ROM. The way the Telus one works, if you don't have a ROM that is based off of Telus's source code, even though everything works perfectly fine, your signal will be "3G". It's really only an aesthetic thing, as the speeds themselves are 4G.
So what kernel do you recomend.
and is it the telus kernel with sudo rights ????
rayman25 said:
So what kernel do you recomend.
and is it the telus kernel with sudo rights ????
Click to expand...
Click to collapse
Not sure for kernel, I just used the stock one. I just finished flashing Synergy, haven't tried anything yet! I seem to have this issue where I need to re-search for my network after going into download mode (normal behavior?) so I need to get that working before I want to benchmark.
I fully tested a custom juggernaut rom and a rooted Telus stock rom and the juggernaut rom is waaayyy better. Smoother more options as well as better signal. True it says 3g but actually I get better speeds than stcok Telus rom. In my opinion after several tests don't use stock Telus. It may be better code than T-Mobile stock rom but custom juggernaut rom is way better
Sent from my SGH-T989 using XDA Premium App
Thanks guys!
Ive got it rooted with the lightning blue theme going, and froze a bunch of apps with Titanium that i hate seeing running in the background.
one last question though(i think)
I once had a Fascinate, when i flashed a voodoo mod kernel and tried to remove it, the phone became bricked and the entire insides of the phone had to be replaced
Can flashing a kernel mess with the boot loader(which i assume is cwm)? Is there anything i need to do differently when changing kernels as well, cause so far with ROMS ive just been resetting and flashing with ease.Also do Roms come with kernels, so flashing a rom will either go back to default/other kernels?
Hey guys
CSpire Wireless formerly Cellular South has finally released their Galaxy S3. The model number is SCH-L710. The reason I am asking this question here and not in a different carriers forum is the L710 in model number. I don't pretend to understand why certain carriers GS3's are labeled with different model numbers, but I thought that since your GS3 and mine both have L710 I thought that possibly the hardware was closer to the same than say verizon's which is a completely different model designation. That being said I am desperate for a custom rom but don't wanna just go flashing any GS3 roms out there to see if any will work on my network. I would feel more comfortable knowing that I had a way to odin flash a stock rom in case any problems arise. Anyway if someone is kind enough and generous enough to help me locate a stock odin flashable rom, then I would be willing to help in any way I can to find a usable rom or port for my version of this great phone.
Thank you so much in advance
I went ahead and flashed the latest CM10 nightly for the Sprint version. Everything seems to be fine, except for data. I still have data, but it is very flaky and won't hardly hold a signal. I suspect it to be the PRL or CM itself.
We definitely need a stock rom for CSpire. I am willing to help any way I can.
abcleanonme said:
I went ahead and flashed the latest CM10 nightly for the Sprint version. Everything seems to be fine, except for data. I still have data, but it is very flaky and won't hardly hold a signal. I suspect it to be the PRL or CM itself.
We definitely need a stock rom for CSpire. I am willing to help any way I can.
Click to expand...
Click to collapse
find the proper PRL for C Spire and use this method (http://forum.xda-developers.com/showthread.php?t=1880781) to flash it
nicholaaaas said:
find the proper PRL for C Spire and use this method (http://forum.xda-developers.com/showthread.php?t=1880781) to flash it
Click to expand...
Click to collapse
Good luck finding that. Cspire keeps things like that unattainable. Unless *228 will work properly to update prl. Should anyone come across it please let me know. Bout to flash CM10
What about using QPST or something to pull the PRL off of a stock device? Can we get someone to do this before flashing any ROMs?
Okay. First of all, I didn't think to look at the PRL before I went and flashed the Sprint CM10. But now it says 20005. I restored my nandroid backup and pulled this PRL from my phone with QPST 2.7.374. In DFS Tool, I noticed there was a CSpire PRL 10009. I wrote this PRL to the Phone and am getting much better service on the stock TW ROM.
HOWEVER, I flashed the Sprint CM10 again and the same thing happened. It says PRL 10009, but there is little to no service and when it does have a little service, it is very flaky and eventually ends up with no data connection at all. Any more suggestions or ideas?
abcleanonme said:
What about using QPST or something to pull the PRL off of a stock device? Can we get someone to do this before flashing any ROMs?
Click to expand...
Click to collapse
after a few hours of trying to get my phone into diagnostic mode i found this that worked. *#22745927 then enable hidden menu then *#7284#
now i think i need to find a newer version of qpst so that it will recognize my phone.
This one worked for me: https://www.dropbox.com/s/tcfsxo5d6vsxfnn/QPST.2.7.374.rar
abcleanonme said:
This one worked for me: https://www.dropbox.com/s/tcfsxo5d6vsxfnn/QPST.2.7.374.rar
Click to expand...
Click to collapse
while i try to get qpst to read my phone can you please upload a copy of our prl and link it please
abcleanonme said:
This one worked for me: https://www.dropbox.com/s/tcfsxo5d6vsxfnn/QPST.2.7.374.rar
Click to expand...
Click to collapse
pm me please
here are some useful links i found.
http://androidforums.com/lg-optimus-m/419514-how-get-prl-off-your-phone.html
http://www.s3forums.com/forum/galaxy-s3-hacking-mods/1614-backup-qpst-backup-your-nv-data-imei-us-variants.html
abcleanonme said:
here are some useful links i found.
http://androidforums.com/lg-optimus-m/419514-how-get-prl-off-your-phone.html
http://www.s3forums.com/forum/galaxy-s3-hacking-mods/1614-backup-qpst-backup-your-nv-data-imei-us-variants.html
Click to expand...
Click to collapse
qpst still says no phone under the phone column no matter what i try
So far, this is what I have done:
First I used the following tool to download drivers for my phone and root ( via option 4 in the program).
http://forum.xda-developers.com/showthread.php?t=1746680
I used CWM to make a nandroid backup.
Next, I flashed the latest CM nightly for the Sprint version here:
http://get.cm/?device=d2spr
After doing this, everything worked fine, EXCEPT for data. I dialed *228 and let it do its thing. I actually had data, but the signal was extremely weak and very flaky. After messing with settings it would usually drop it altogether.
I restored my nandroid backup and noticed that although I had data, it seemed to be weaker than before ( although that may just be me).
I decided to follow the following guide on how to get the PRL from the phone:
http://androidforums.com/lg-optimus-m/419514-how-get-prl-off-your-phone.html
The version of QPST on that post was outdated, so I found and used QPST 2.7.374, which I posted a link to earlier in the thread.
I managed to copy the 20005 PRL off of my phone and saved it.
I then started up DFS Tool and wrote the CSpire 10009 PRL to my phone.
I get much better service on the stock ROM, but the Sprint CM builds still do the same thing. No data.
UPDATE: I did a *228 to get back on the 20005 PRL and it is working just as well as the 10009 PRL now.
Also, as OBSt4l0n discovered, there's simultaneous voice and data. Not sure if anyone else has noticed this or if this was happening before flashing roms
and PRL's.
Okay. We no longer believe it's the PRL causing the problems. More info to come. May be slower over the weekend with weekend stuff and all.
Sent from my SCH-L710 using xda premium
abcleanonme said:
Okay. We no longer believe it's the PRL causing the problems. More info to come. May be slower over the weekend with weekend stuff and all.
Sent from my SCH-L710 using xda premium
Click to expand...
Click to collapse
Thanks for the update. I thought everybody had long abandoned trying to port a rom to the cspire gs3 lol.
bone39367 said:
Thanks for the update. I thought everybody had long abandoned trying to port a rom to the cspire gs3 lol.
Click to expand...
Click to collapse
Out of curiosity, Could it be the APN's causing the issues? And from what I've seen the vzw variant seems closer to the cspire. but its hard to say. Just to try and eliminate possible causes, I would reccomend flashing this here and see if you get the same issues. http://goo-inside.me/devs/aokp/d2vzw/aokp_d2vzw_jb_build-4.zip Its AOKP for the vzw variant. I have used it as my daily driver for the past week and I'm on Sprint. Dont have to change anything in it, just flash.
Just my 2 cents
billard412 said:
Out of curiosity, Could it be the APN's causing the issues? And from what I've seen the vzw variant seems closer to the cspire. but its hard to say. Just to try and eliminate possible causes, I would reccomend flashing this here and see if you get the same issues. Its AOKP for the vzw variant. I have used it as my daily driver for the past week and I'm on Sprint. Dont have to change anything in it, just flash.
Just my 2 cents
Click to expand...
Click to collapse
Thanks. I'm tempted to try this but the only problem is I don't have a way of going back to stock. I did, however make a backup through cwm but I wish there was an absolute stock cspire rom out there. I would love to test out developer's roms and provide feedback if somebody knows where I could get a stock rom to flash for cspire's gs3....
bone39367 said:
Thanks. I'm tempted to try this but the only problem is I don't have a way of going back to stock. I did, however make a backup through cwm but I wish there was an absolute stock cspire rom out there. I would love to test out developer's roms and provide feedback if somebody knows where I could get a stock rom to flash for cspire's gs3....
Click to expand...
Click to collapse
I've been trying to find out.... without success.....
billard412 said:
Out of curiosity, Could it be the APN's causing the issues? And from what I've seen the vzw variant seems closer to the cspire. but its hard to say. Just to try and eliminate possible causes, I would reccomend flashing this here and see if you get the same issues. http://goo-inside.me/devs/aokp/d2vzw/aokp_d2vzw_jb_build-4.zip Its AOKP for the vzw variant. I have used it as my daily driver for the past week and I'm on Sprint. Dont have to change anything in it, just flash.
Just my 2 cents
Click to expand...
Click to collapse
Just tried this and still no data. We need a dev to look into this. Apparently there is something internal in code stopping our radio from functioning properly. I have attempted to pull my RIL file and insert it in cm10 then rebooting and no luck. Still no data. Any devs out there willing to look into this for us?
Sent from my SCH-L710 using xda app-developers app
Bump ****
first of all i was lucky all I had to do was go back and use a root 66 image to recover using odin.
Now i know i will sound like a newb sorry please bear with me if you can.
From the start i was on 4.1.2 on SRx Mod i decided Hay i should encrypt my phone (bad idea i got stuck in a boot loop) so after searching for how to fix it i was told to use the unbrick then i wad told to use route 66 i choose route 66. I have since successfully flashed rooted 4.1.2 but i have a few questions.
First route 66 lets you choose which recovery you wish to use. now to install a recovery (my first root it came with CWM) Should i just download the app and install CWM with rom recovery or use Goo manager to install TWRP? or should i use odin to flash it? if i should flash it where should i get the correct files?
Second.
Say I would like to update to 4.3 and take advantage of roms again. What is the safest way to go about this. Depending on rls I have been able to update via recovery and a new rom and i have had to use odin. I believe (not sure) safest way to go from a major rls to another it should be done with odin. Like going from ICS to JB so should I use odin again to root to 4.3?
So to shorten my question
How do i install recovery on a freshly rooted (re rooted via route 66) Also i am currently runnning 4.12 to update to 4.3 do i need to use odin and a 4.3 image to be safe? or can i install a 4.3 rom and it will update.
In all now that my phone is working I am weary of just trying and want to do it the correct way and now i know trying to use encryption is dumb!
THANKS in ADVANCE i appreciate your help.
When it comes to Recoveries, choos if you want CWM or TWRP. Both are good. Based on that get either Rom Manager app for CWM or Goo Manager for TWRP. Let the app install the recovery for you.
If you want 4.3, then look for Stock Mod Rom in Android Development section. Flash that rom via CWM/TWRP. Make sure to follow the instructions in the Rom's thread. Particularly the part where it wants you to flash ATT insecure kernel. The Rom is Rooted. Do not flash 4.3 via Odin.
Thanks for the refresher
I have been away for a little while and i wanted to make sure. SO to get it straight
Right now I just got back from boot loop with route 66 via odin.
To go on i simply get CWM or TWRP with the respective program (rom manager or goo manager)
Then get the 4.3 rom from the rout66 thread and update to 4.3 via recovery.
If not which rom do i use.
Edit:
Ok now i think i understand your post you directed me to use a specific rom
http://forum.xda-developers.com/showthread.php?t=2501303
So from base 4.1.2 i can update to any 4.3 rom i choose? I just want to make sure as most major releases have some issues at the beginning maybe everything is sorted and their is no problems,
One thing i want to ask is can i choose another rom as sometimes i like to switch to and from touchwiz
So i guess my question now is once i install a recovery program of my choice (i always used CWM so ill probably stick with that)
Can I install any rom no problem? as far as changing versions only go up to 4.3 dont go back down with a recovery flash?
SO AFAIK right now that everything is all good and i wont mess my phone up again when loading a rom.
Is their anything i SHOULD NOT do, Beyond common sense i know not to flash a rom for another phone ETC
I appreciate your help I haven't been following the development for a couple months So i am Rusty also its been a while since i had to start from scratch with odin and at that time we did not have the GREAT list of Official Images so I got a rooted rom that had CWM already installed. I want to get to how i was before when i was enjoying the work of the devs and loving it. being in stock reminds me of how much work the devs do YOU GUYS ARE GREAT (if any even read this thread)
BeatnikBandit said:
Thanks for the refresher
I have been away for a little while and i wanted to make sure. SO to get it straight
Right now I just got back from boot loop with route 66 via odin.
To go on i simply get CWM or TWRP with the respective program (rom manager or goo manager)
Then get the 4.3 rom from the rout66 thread and update to 4.3 via recovery.
If not which rom do i use.
Click to expand...
Click to collapse
Do not do the Red Striked part. Search for Stock Mod Rom by @saranhai
Thank you to be safe i will use the ROM you suggested although this is the only thing that worries me as i never have or really want to flash modems
YOU MUST FLASH THE T999UVUEMJ4 MODEM OR T999UVUEMJC MODEM FOR T-MOBILE GALAXY S III IN ORDER FOR DATA TO WORK; OTHERWISE YOU WILL NOT HAVE DATA
AS USUAL, I'M NOT RESPONSIBLE FOR WHAT HAPPENS TO YOUR DEVICE! ONE WRONG MOVE (Especially with the Modem) AND YOU COULD END UP WITH A VERY EXPENSIVE BRICK. PROCEED AT OWN RISK.
Click to expand...
Click to collapse
This is from the page for the
[ROM][3.9.14] .::StockMOD ROM::. | TouchWiz 4.3 | Galaxy S5 | UVUEMJC | RLS2
http://forum.xda-developers.com/showthread.php?t=2501303
I hope this is the ROM you are talking about and if so what do i do about the modem issue as I am coming from 4.1.2 IDK if i have the correct modem installed. All i have right now is Route 66 rooted 4.1.2 and CWM recovery I also created a Nandroid as soon as i got recovery so i can ave a pretty clean android to go back to if anything happens.
I am sorry i may be annoyed if i were you possibly so i hope you are hanging in there with me i really appreciate it once i do this ill be back in the game and wont need any more help. I just need to get this part sorted, THANK YOU
So other than the modem thing I think i got it, i just hope i dont have to mess with the modem IDK if I'm ready to try something that could hard brick my phone after just recovering it
Flashing the modem won't brick it. It's the exact same procedure as flashing the kernel, and the risk level is pretty much the same. As long as your device is the T999, you don't have anything to worry about. Just check the md5 on the download to make sure its not a corrupted/bad download. Even if you flash the T999L/T999V/I535 modem, it shouldn't brick. It just wouldn't get signal till you flash the correct one again. Many, many people have flashed the modems with no problems at all.
Sent from my SM-N900T using Tapatalk
THANKS DOC
I really didnt think you would answer my post!
Anyway so even though the warning says i can brick it with a modem change really all that will happen is that i will just not get Data until i install the correct one got it.
And unless anyone posts otherwise The first 4.3 rom i should install is Stock Mod Rom by @saranhai and also flash the modem T999UVUEMJC via recovery?
I tried the modem map but i had no success with getting to to work, first it said the link was not supported and i needed to revert to GMaps Classic so i did but i got the same results. Random places all over the world (some in the sea) some said city and modem some were simply city's so i think its out of date so i suppose that the worst that can happen is that i get no data i suppose i can try the other modem listed on the roms page?
If someone knows (as their are two maybe its east west cost or something of the like i live in southern California south of la but furthest from the border of Mexico in San Diego so north San Diego county but anyone that knows the area may know of the massive military base i live south east of Camp Pendleton
(off topic but if a war comes to our shores i pray i am dead already or something divine as i live very close to a large Marine Training base and camp/base in General and right next to it (on the coast) is a dual Nuclear Reactor Power plant and one reactor has been malfunctioning and AFAIK its just being maintained to keep anything catastrophic from happening (which i believe IDK for sure was the reason why it is still running but not producing power)
BeatnikBandit said:
THANKS DOC
I really didnt think you would answer my post!
Click to expand...
Click to collapse
No problem! If I am able and have something to add...
Anyway so even though the warning says i can brick it with a modem change really all that will happen is that i will just not get Data until i install the correct one got it.
Click to expand...
Click to collapse
Many people warn about that because on many devices it is true. just like a kernel or recovery though, if you flash the wrong thing to its partition, it can brick. I.e. If you flash a recovery to the modems partition.
A lot of times people bring habits from their old devices. In our case, while it is possible, it's highly unlikely you'd brick flashing the modem. We know it's not going to flash the wrong item/partition. Several people have tried flashing the I535, T999L, T999N modems and all that happened was they got no working signal. Flashed back to the correct modem and all was good again.
And unless anyone posts otherwise The first 4.3 rom i should install is Stock Mod Rom by @saranhai and also flash the modem T999UVUEMJC via recovery?
Click to expand...
Click to collapse
This would be my recommendation, yes. Just follow instructions in the OP.
I tried the modem map but i had no success with getting to to work, first it said the link was not supported and i needed to revert to GMaps Classic so i did but i got the same results. Random places all over the world (some in the sea) some said city and modem some were simply city's so i think its out of date so i suppose that the worst that can happen is that i get no data i suppose i can try the other modem listed on the roms page?
Click to expand...
Click to collapse
The map is definitely screwed up and I apologize for that! I meant to start a new one a while back but just never got around to it. Still on my to do list!
Good Luck!
Sent from my SM-N900T using Tapatalk
Well thank you guys both I appreciate you gave me the correct info fast Perseus71 and thank you for clarifying DocHoliday77 And an extra thank you for all the work you do for the S III community!
i was just about to do this althoug i downloaded the rom and the modem but now what about the "insecure Kernal" I dont want to mess my phone up again sorry for all the questions its just after you mess up your phone when yoyu come back to roms and its just like getting a traffic ticket for a little bit you drive like you just got a ticket REALLY SAFE with no nerve so sorry but thats my mindset i just messed up my phone and dont want to do it again (i just finished paying for it too so i donk want to break my just paid off 600 dollar car lol.
so yeah AFAIK the post sys all i need is the modem but do i need the kernal too as it may not be listed as it is know its needed at one point when updating versions?
THANKS AND SORRY this is probably the last thing i need as i was just about to flash but just got worried
If wifi doesnt turn on, then try the kernel. If everything boots and runs as you like, then its up to you.
Sent from my SM-N900T using Tapatalk
I rooted my old milestone many years ago but havee been keeping my devices stock ever since, until today that is. Today I decided I wanted to try to root my Samsung SGH-I747M with Telus and everything seemed to start off smoothly. Once installed the SuperSU stopped working. I tried fixs I had read online such as updating the app, but this did not work. I read on a forum that you could flash something to disable know to help fix the problem. When I tried going this avenue I was not able to reboot my phone. I tried restoring from a backup taken before flashing, but I havent done any of this in so long im not entirely sure the backup took properly. At one point I got a message saying no OS was installed but after restoring this seemed to go away. I apparently do not remember anything about rooting from my milestone and am hoping someone may be able to help me get out of this mess. I am currently downloading the stock firmware and I think I will try flashing it tomorrow. I also was hoping someone could point me in the direction of a thread on xda that went into a more detailed explanation of how rooting works, what specifically roms and flashing all is and does. Any help is greatly appreciated.
cdriver said:
I rooted my old milestone many years ago but havee been keeping my devices stock ever since, until today that is. Today I decided I wanted to try to root my Samsung SGH-I747M with Telus and everything seemed to start off smoothly. Once installed the SuperSU stopped working. I tried fixs I had read online such as updating the app, but this did not work. I read on a forum that you could flash something to disable know to help fix the problem. When I tried going this avenue I was not able to reboot my phone. I tried restoring from a backup taken before flashing, but I havent done any of this in so long im not entirely sure the backup took properly. At one point I got a message saying no OS was installed but after restoring this seemed to go away. I apparently do not remember anything about rooting from my milestone and am hoping someone may be able to help me get out of this mess. I am currently downloading the stock firmware and I think I will try flashing it tomorrow. I also was hoping someone could point me in the direction of a thread on xda that went into a more detailed explanation of how rooting works, what specifically roms and flashing all is and does. Any help is greatly appreciated.
Click to expand...
Click to collapse
General section is most likely the best place for that.
Here's a How-to that should get you started: http://forum.xda-developers.com/showthread.php?t=2538991
And here is the Sticky index: http://forum.xda-developers.com/showthread.php?t=1725839 Lots of good guides and info in there!
General section is most likely the best place for that.
Click to expand...
Click to collapse
The Only problem is I already attempted to follow this and my phone will no longer boot up. Also I tried navigating through the stickies. couldn't find much info for my device. I will be trying to flash the stock firmware tonight but I want to have a clear understanding on what flashing is and what the difference is between os firmware kernel and rom and such BEFORE flashing this firmware tonight. I hope someone will be able to help.
cdriver said:
The Only problem is I already attempted to follow this and my phone will no longer boot up. Also I tried navigating through the stickies. couldn't find much info for my device. I will be trying to flash the stock firmware tonight but I want to have a clear understanding on what flashing is and what the difference is between os firmware kernel and rom and such BEFORE flashing this firmware tonight. I hope someone will be able to help.
Click to expand...
Click to collapse
Well that info is already in the Sticky Index. Understanding what you're doing (or about to do) is really important but you gotta start reading, it's all there.
OS, firmware and ROM are the same thing.
When your phone boots, it basically goes: Bootloaders -> Kernel -> ROM (OS).
The kernel has pretty much all the "underground" controls (RAM, Mhz, governor, scheduler, BT, Wifi, etc).
I won't write everything but those are the basics.
Also, having a Canadian variant of the S3 (that's what the M is for), doesn't change much other than flashing bootloaders and stock ROM (which you'll wanna use the Canadian variant bootloaders and Telus ROM for stock). Everything else is basically the same.
Also, having a Canadian variant of the S3 (that's what the M is for), doesn't change much other than flashing bootloaders and stock ROM (which you'll wanna use the Canadian variant bootloaders and Telus ROM for stock). Everything else is basically the same.
Click to expand...
Click to collapse
Sweet I will definitely check that out. So I did flash twrp to my phone. Is it possible that I flashed the version say for the i747 but not the m version and that is why the phone wont move past the samsung screen? Also should I attempt to get rid of twrp before flashing the stock firmware. This should answer all my questions and then I will explore the stickies some more.
cdriver said:
Sweet I will definitely check that out. So I did flash twrp to my phone. Is it possible that I flashed the version say for the i747 but not the m version and that is why the phone wont move past the samsung screen? Also should I attempt to get rid of twrp before flashing the stock firmware. This should answer all my questions and then I will explore the stickies some more.
Click to expand...
Click to collapse
If flashing a stock ROM, flash the Telus one. If flashing a custom ROM, it doesn't matter (I747 or M variant), as long as it's D2LTE.
Your recovery doesn't change anything to flashing with Odin, it will overwrite it.
Flashing the stock firmware fixed my problems. Thanks for all of your help and I will definitely be checking out the links that you sent me before trying to root again tomorrow.