Develop Bugs

Revert Back To Stock Rom At&t Gs3 from CyanogenMod Installer

Hello, I downloaded the installer and it did help me flash the rom but now i would like to go back to the stock rom, i have tried it with odin but it keeps stating that it fails. I also have the correct .tar file. This is the error it gives me. Thanks in advanced!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Stock backup?
jayyfresh said:
Hello, I downloaded the installer and it did help me flash the rom but now i would like to go back to the stock rom, i have tried it with odin but it keeps stating that it fails. I also have the correct .tar file. This is the error it gives me. Thanks in advanced!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
WHen you first rooted and installed your custom recovery, did you make a backup in that program before anything else?

electrojas said:
WHen you first rooted and installed your custom recovery, did you make a backup in that program before anything else?
Click to expand...
Click to collapse
I used the cyanogen mod installer on my nexus 7 and it never gave an option to backup. It was an automated process that installed without any way of going back.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Cyanogen
bellifritz said:
I used the cyanogen mod installer on my nexus 7 and it never gave an option to backup. It was an automated process that installed without any way of going back.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I guess Im not experienced with that mod installer but in order to even get that far didnt you have to root, and install a custom recovery? Or is that a totally different thing?

electrojas said:
WHen you first rooted and installed your custom recovery, did you make a backup in that program before anything else?
Click to expand...
Click to collapse
i backed it up with kies

CWM or TRWP?
jayyfresh said:
i backed it up with kies
Click to expand...
Click to collapse
Do you have a custom recovery installed on your device?

electrojas said:
Do you have a custom recovery installed on your device?
Click to expand...
Click to collapse
im not sure actually, im kinda new to flashing roms, how can i tell?

pLZ HELP flash failed

hi i tried to flash galaxy grand i9802 but in said failed
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082XXAMC7_I9082OJVAMC1_I9082XXAMC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> vc-firmware.img
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> BcmCP.img
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
plz help me i cant use my phone :crying::crying::crying:

jackeagle said:
hi i tried to flash galaxy grand i9802 but in said failed
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082XXAMC7_I9082OJVAMC1_I9082XXAMC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> vc-firmware.img
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> BcmCP.img
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
plz help me i cant use my phone :crying::crying::crying:
Click to expand...
Click to collapse
boot into recovery and wipe data/reset and reflash the rom via odin

jackeagle said:
hi i tried to flash galaxy grand i9802 but in said failed
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082XXAMC7_I9082OJVAMC1_I9082XXAMC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> vc-firmware.img
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> BcmCP.img
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
plz help me i cant use my phone :crying::crying::crying:
Click to expand...
Click to collapse
Try flashing with the stock again... Keep the phone untouched. I guess the phone got disconnected during the process. And flash process failed. Nothing to worry flash with odin again
Sent from my GT-I9082 using XDA Premium 4 mobile app

DMJoh said:
Try flashing with the stock again... Keep the phone untouched. I guess the phone got disconnected during the process. And flash process failed. Nothing to worry flash with odin again
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
THANKS for the reply...I tried to flash again but same error and i cant boot to recovery it says " FIRMWARE UPGRADE ENCOUNTERED AN ISSUE.PLEASE SELECT RECOVERY MODE IN KIES AND TRY AGAIN" plz help:crying:

DMJoh said:
Try flashing with the stock again... Keep the phone untouched. I guess the phone got disconnected during the process. And flash process failed. Nothing to worry flash with odin again
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
THANKS for the reply...I tried to flash again but same error and i cant boot to recovery it says " FIRMWARE UPGRADE ENCOUNTERED AN ISSUE.PLEASE SELECT RECOVERY MODE IN KIES AND TRY AGAIN" plz help PLZ i m not able to charge battery back so what might the backup time i get in download mode coz via kies it might take 7 hours...before failure it was 80% charged:crying::crying:

Try a different usb cable
Sent from my GT-I9082 using Tapatalk

jackeagle said:
THANKS for the reply...I tried to flash again but same error and i cant boot to recovery it says " FIRMWARE UPGRADE ENCOUNTERED AN ISSUE.PLEASE SELECT RECOVERY MODE IN KIES AND TRY AGAIN" plz help PLZ i m not able to charge battery back so what might the backup time i get in download mode coz via kies it might take 7 hours...before failure it was 80% charged:crying::crying:
Click to expand...
Click to collapse
Still you can go to download mode by pressing the keys... So using odin you can flash your device using pda. But the thing is you should see that the process is getting till pass. Also even if it shows that error message just plug in your phone and it will charge. Connecting to kies and updating is hell of a task and you will fail for 85℅.
So the point is you can go to download mode even now.
Connect it to pc and flash the firmware as before.
Your problem might have caused because of a faulty usb cable, usb port of pc or the micro usb port of your phone.
These are chances so try @nother port your computer, if needed. Change the cable.
Also take care that the phone is kept alone while downloading the ROM.
:thumbup: :thumbup:
Sent from my GT-I9082 using XDA Premium 4 mobile app

DMJoh said:
Still you can go to download mode by pressing the keys... So using odin you can flash your device using pda. But the thing is you should see that the process is getting till pass. Also even if it shows that error message just plug in your phone and it will charge. Connecting to kies and updating is hell of a task and you will fail for 85℅.
So the point is you can go to download mode even now.
Connect it to pc and flash the firmware as before.
Your problem might have caused because of a faulty usb cable, usb port of pc or the micro usb port of your phone.
These are chances so try @nother port your computer, if needed. Change the cable.
Also take care that the phone is kept alone while downloading the ROM.
:thumbup: :thumbup:
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yahooooooooooooooo My Galaxy Grand is back in action:victory::victory: Thanks A lot to everyone for replying me very soon As DMJoh said i did it..I changed my usb cable with my old Nokia usb cable (very short) and tried to flash the firmware via odin and it was successful so problem was my USB cable.. but my bin is 48 and all status are custom:laugh:....

jackeagle said:
Yahooooooooooooooo My Galaxy Grand is back in action:victory::victory: Thanks A lot to everyone for replying me very soon As DMJoh said i did it..I changed my usb cable with my old Nokia usb cable (very short) and tried to flash the firmware via odin and it was successful so problem was my USB cable.. but my bin is 48 and all status are custom:laugh:....
Click to expand...
Click to collapse
Kudos! Use Triangle Away to reset Bin counter :victory: :laugh:

[Q&A] [HOWTO][TAR][OUDHS] THE ODIN THREAD :: Return to stock, fix soft brick :: 5/7/

[Q&A] [HOWTO][TAR][OUDHS] THE ODIN THREAD :: Return to stock, fix soft brick :: 5/7/
Q&A for [HOWTO][TAR][OUDHS] THE ODIN THREAD :: Return to stock, fix soft brick :: 5/7/13 MDL
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [HOWTO][TAR][OUDHS] THE ODIN THREAD :: Return to stock, fix soft brick :: 5/7/13 MDL. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

i did all this to my s4 but now when i boot it, says Kernel Is Not Seandroid Enforcing, Set Warranty Bit
also when i booted the phone the wifi does not work. could you help with this problem?

Samsung Galaxy S4
Is This ''UVUAMDL Official TAR'' for Samsung Galaxy S4?

Ayaz Gill said:
Is This ''UVUAMDL Official TAR'' for Samsung Galaxy S4?
Click to expand...
Click to collapse
Yes

UPDATE: I fixed the issue while posting this, the solution is included. I am hoping by posting this it may help someone having the same problem, because I spent hours and days trying to solve the issue. Sorry the post is so long.
This is my first post.. I am in desperate need of help!
I have searched everywhere, and cannot find any answers really.
I rooted my M919 at one point, and I could not receive OTA updates.
I do not know if it was rooted when I tried to update it with Odin though.
I was in a hurry (I know BIG mistake) and I never wiped my phone or anything before trying to flash the phone.
I think the phone may not be working because I may have not used triangle away before, but I am not sure if I ever used it. I did the root a long time ago.
I have tried changing USB cords, computers, drivers, md5 files, different Odin versions, flashing PIT file, you name it, I have probably tried it
When I boot the phone the currupt recovery screen shows up. Kies will not recognize the phone.
In the left corner it says:
ODIN MODE
...SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE enabled
I can still access "downloading" mode, and it says the same as above.
Odin gives me different errors depending on the file I am attempting to flash
The reason I tried flashing the PIT file is because it would sometimes say
I am not completely sure what update I was using before this all happened, but I think it may have been this one, unrooted?:
CF-Auto-Root-jfltetmo-jfltetmo-sghm919.tar.md5
Error codes are as follows:
While flashing 4.4.4 (Odin 3.10)
M919UVUFNH7_M919TMBFNH7_M919UVUFNH7_HOME.tar.md5
JFLTE_USA_TMO_16G.pit
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUFNH7_M919TMBFNH7_M919UVUFNH7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Recovery File I found (Odin 3.09)
JFLTE_USA_TMO_16G.pit
openrecovery-twrp-2.8.0.1-jfltetmo.tar
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Recovery File I found (Odin 3.09)
JFLTE_USA_TMO_16G.pit
openrecovery-twrp-2.8.0.1-jfltetmo.tar
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
One time I tried using this and it passed!!!
This ONLY works on 3.07 to my knowledge though. It fails on every other Odin
Recovery File I found (Odin 3.07)
JFLTE_USA_TMO_16G.pit
openrecovery-twrp-2.8.0.1-jfltetmo.tar
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
The screen is now frozen on the "Samsung Galaxy S4" screen and just shuts off if trying to boot into recovery mode.
If plugged into USB while trying to boot into recovery it launches the recovery file I just flashed!
I went back into download mode, and plugged the phone back in.
I opened Odin 3.07 again, since I had success with the recovery file.
I tried flashing 4.4.4 again M919UVUFNH7_M919TMBFNH7_M919UVUFNH7_HOME.tar.md5
and it failed while only having Auto Reboot checked. I tried launching it with Auto Reboot AND F Reset Time, and it worked!! Hope this helps someone!!

Hi DarkMenace - would it be possible for you to send me signed M919 PIT file as well? Thanks

shaqto said:
Hi DarkMenace - would it be possible for you to send me signed M919 PIT file as well? Thanks
Click to expand...
Click to collapse
Replied to your email. Not sure if I still have it but I may be able to find it if you say it's not there.

alright i did a no no... I tried flashing back to stock odin when my phone was encrypted .. now its softbricked.
everytime i try to flash the stock odin, it always fails at system.img ext4. Need some help guys, its been softbricked for a week. I flashed philz touch twrp on it so I do recovery on it. any ideas?

doesnt work
Bricked my s4/but i had twrp installed to fix it

I'm getting a Fail message in Odin over and over. I've downloaded the .zip twice so I don't think it's an issue with a corrupt file... The .dll is in my Odin folder and everything. Pretty confused and today is my last day to send my phone back into T-Mobile before they charge me.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)

asmth00 said:
I'm getting a Fail message in Odin over and over. I've downloaded the .zip twice so I don't think it's an issue with a corrupt file... The .dll is in my Odin folder and everything. Pretty confused and today is my last day to send my phone back into T-Mobile before they charge me.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
What version Bootloader/Modems do you have now on the phone? If the version you have now has Knox, then you can't downgrade to MDL.
If you are not sure, you can use this free app: https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo&hl=en
If the version is MK2 or newer, you can't downgrade to MDL.
You can find newer firmwares either on the SamMobile.com site, or on this thread: http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508
Rob

<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!

In odin, it says 0:[COM4] on the top left
You have 0:[COM3] in your screenshot
Is there a problem or something?Or is it fine?

<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SGH-M919-UVUAMDB-k0nane.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
I get this when i click start
i have a gt-1905 softbricked
please help me

AziNoapte said:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SGH-M919-UVUAMDB-k0nane.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
I get this when i click start
i have a gt-1905 softbricked
please help me
Click to expand...
Click to collapse
If you have a GT-1905 (which I can't find), you shouldn't be trying to flash FIRMWARE for a T-Mobile phone (SGH-M919). That will brick your phone.
If it is an S4, you should be able to take off the back and look under the battery for the model number.
You can flash ROMs, but not firmware between different S4 models. Try finding the FIRMWARE for your phone, and flash that. Also, verify your model, because GT-1905 isn't a Samsung model number.
You can find firmwares here: http://www.sammobile.com/firmwares/
Rob

rlichtefeld said:
If you have a GT-1905 (which I can't find), you shouldn't be trying to flash FIRMWARE for a T-Mobile phone (SGH-M919). That will brick your phone.
If it is an S4, you should be able to take off the back and look under the battery for the model number.
You can flash ROMs, but not firmware between different S4 models. Try finding the FIRMWARE for your phone, and flash that. Also, verify your model, because GT-1905 isn't a Samsung model number.
You can find firmwares here: ------------To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links--------------
Rob
Click to expand...
Click to collapse
i messed up the writing cuz i was scared
I have 19505
I managed to get to 4.2.2 with konane`s guide,got the stock tar but wifi doesnt work on my S4
Can you help me fix it?
Or if it is impossible, can i upgrade to KitKat?

AziNoapte said:
i messed up the writing cuz i was scared
I have 19505
I managed to get to 4.2.2 with konane`s guide,got the stock tar but wifi doesnt work on my S4
Can you help me fix it?
Or if it is impossible, can i upgrade to KitKat?
Click to expand...
Click to collapse
Since this forum is for the T-Mobile variant of the S4, and I'm not familiar with the GT-I9505, I would suggest you try the forum for that model:
http://forum.xda-developers.com/galaxy-s4
If you flashed a T-Mobile tar to your I9505, it is probably because of the radio/modem which was designed for the T-Mo model. There should be links in that forum about no WiFi, etc.
Rob

Hello gang. Got a new circuit board installed two weeks ago. Got the phone back, started setting it up, and after about an hour the touchscreen quit working. >8\
I emailed the shop and they said "could be because you're rooted."
Smelled like bull**** to me, but giving them the benefit of the doubt I figured I'd try to flash back to stock. (Which I WAS actually stock, I had the 4.4.4 OTA update, and then rooted and de-bloated.)
Anyway, I downloaded the "Stock firmware" (SGH-M919-UVUAMDB-k0nane.tar.md5) from post 1 in the title thread and flashed it with Odin.
SEEMS to be working, but oddly enough I have a M919UVUFNH7 baseband and bootloader, but Android 4.4.2, which based on my reading, should be impossible?
Also, like several other posters, I have no wifi.
In any event, I am currently downloading the NH7 firmware from sammobile. Says 2 hours to go.
Will try to flash that with Odin and we'll see what happens. Anyone have suggestions in the meantime?

OK - follow-up. I downloaded M919UVUFNK2_M919TMBFNK2_M919UVUFNK2_HOME.tar and flashed it with Odin. Even though Odin said "Boot" and "Modem" in the flashing process, I still seem to have NH7 bootloaders and baseband.
Help?

Well, never mind. I don't care anymore. Tried to replace my glass and cracked the digitizer. Dunno if I'm down to drop another $120 on this thing now.
$300 purchase price
$100 circuit board replacement
$12 glass
Now $120 for a display? I might just call knock it off with this thing.

Stupid question, sorry, but I bricked my phone and I'm stumped...

So I followed the instructions here i found on google by searching "how to how to root s6 edge plus", second link down... and it was a bad idea. Now my phone will boot, and show the lock screen for a second or two, and then just reboot. So I'm stuck in a bootloop. I'm fairly new to the android rooting scene (I've been jailbreaking iPhones sice 2007). What do I do? I tried restoring the default firmware in Odin but it didn't work. HELP!

hereisalex said:
So I followed the instructions here i found on google by searching "how to how to root s6 edge plus", second link down... and it was a bad idea. Now my phone will boot, and show the lock screen for a second or two, and then just reboot. So I'm stuck in a bootloop. I'm fairly new to the android rooting scene (I've been jailbreaking iPhones sice 2007). What do I do? I tried restoring the default firmware in Odin but it didn't work. HELP!
Click to expand...
Click to collapse
Your phone is not bricked.
Best bet is to odin flash the official stock firmware and then go into recovery mode.
When in recovery do a factory reset.
Then reboot the phone.
After doing the above the phone will work fine.
Good luck,
Have a nice evening.
Sent from my SM-G928T using Tapatalk

Thank you for responding. I've done that, and it's failing. I tried to post a screenshot but XDA won't allow me since I"m a new user. So here's a transcript:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Perhaps I'm not using the right file? I have 20150409165121\G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5 if that means anything.
Thank you again for your help.
Misterjunky said:
Your phone is not bricked.
Best bet is to odin flash the official stock firmware and then go into recovery mode.
When in recovery do a factory reset.
Then reboot the phone.
After doing the above the phone will work fine.
Good luck,
Have a nice evening.
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse

hereisalex said:
Thank you for responding. I've done that, and it's failing. I tried to post a screenshot but XDA won't allow me since I"m a new user. So here's a transcript:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Perhaps I'm not using the right file? I have 20150409165121\G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5 if that means anything.
Thank you again for your help.
Click to expand...
Click to collapse
Here is the correct firmware and download link for the S6 EDGE+ phone.
https://www.androidfilehost.com/?fid=24052804347822287
Good luck.
Sent from my SM-G928T using Tapatalk

Misterjunky said:
Here is the correct firmware and download link for the S6 EDGE+ phone.
==========================================================
Good luck.
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse
Thank You! Now, if I do get my phone back up and running, how can I root it? I don't need any custom ROM or anything, I just want root permissions.

hereisalex said:
Thank You! Now, if I do get my phone back up and running, how can I root it? I don't need any custom ROM or anything, I just want root permissions.
Click to expand...
Click to collapse
Yes you can, follow the link below for full instructions .
http://forum.xda-developers.com/s6-edge-plus/development/arter97-kernel-galaxy-s6-edge-plus-t3189913
Good luck..
Sent from my SM-G928T using Tapatalk

It's still not working. It will boot up, play the T-Mobile jingle, and show me the lock screen, and then reboot after about half a second. This repeats indefinitely. Please help?

Stuck at Samsung Logo Tmobile Note II (T889)

Hello ! All
Couple of days ago my phone shutdown while it was on 7 % . from then whenever I try to charge or connect. It shows me SamsungNote II logo or when I pull the battery out and put it back and connect the cable it shows me empty battery logo (inside it refresher circling).
What I have done so far......
Factory Reset (Vol up /Home/Power)
I tried to reset to factory as soon as I select delete all data and select yes it restarts and back to Samsung Logo......
Download Mode (Vol Dwn /Home/Power)
I can get into Download Mode but It doesn't show up in the odin...my other note II pops up but not this phone.
Changing Ports/Cables
I have changed ports/Cables but nothing worked it out , other Note 2 which I have picked every cable/port ...
Led Lights : I dont see any lights flashing .......
Need Help ..Thanks

Could it be a battery problem?

audit13 said:
Could it be a battery problem?
Click to expand...
Click to collapse
the batteries working fine with my other Note II (T889), How about charging port is bad ????

Yes, could be a bad USB port which causes the phone to not appear in Odin.

How did it go? My Note II just had the same thing and I couldn't even get to recovery.

testrider said:
How did it go? My Note II just had the same thing and I couldn't even get to recovery.
Click to expand...
Click to collapse
Does it go in Download Mode ????
remove battery ...Put it back in (Remove sim/Sd card)
Hold Power /Home /Vol Down
or
Hold Power /Home /Vol Down ..Let go Power button
This is what I am planning to do
ordered the Charging Port Dock ..going to replace it ....
After search came to know few things
1. Bad Charging port
2. Charger/cable is not compatible i.e same voltage with Note 2
3. Batteries in the market are bad ..they say its OEM but they are bad (Found OEM battery which is $13)

Thank you for your reply and I appreciate it!
I already searched here and found no solution of my problem. I hope you could help me out.
- I have my Note II for 3 years and it never had any problem until today, when it rebooted by itself and now stuck at "Galaxy Note II" screen. I have tried all of the following:
1) Removed battery, retry many many times, same thing
2) Try to put it in recovery mode by VOL_UP+HOME+POWER, the same "Galaxy Note II" showed up and nothing further
3) I was able to put it in download mode but that didn't help
4) I tried different battery, same thing
5) when I plugged in the USB charger, the battery icon showed up with no battery level and only a circle on top of it.
Please advise what I should do next? My Note II was running stock firmware 4.1.2 and rooted. No CWM. It's a T-Mobile (model SGH-T889) if that makes any difference.
THank you very much in advance!
Mike

testrider said:
Thank you for your reply and I appreciate it!
I already searched here and found no solution of my problem. I hope you could help me out.
- I have my Note II for 3 years and it never had any problem until today, when it rebooted by itself and now stuck at "Galaxy Note II" screen. I have tried all of the following:
1) Removed battery, retry many many times, same thing
2) Try to put it in recovery mode by VOL_UP+HOME+POWER, the same "Galaxy Note II" showed up and nothing further
3) I was able to put it in download mode but that didn't help
4) I tried different battery, same thing
5) when I plugged in the USB charger, the battery icon showed up with no battery level and only a circle on top of it.
Please advise what I should do next? My Note II was running stock firmware 4.1.2 and rooted. No CWM. It's a T-Mobile (model SGH-T889) if that makes any difference.
THank you very much in advance!
Mike
Click to expand...
Click to collapse
Same here bought in jul 2013 (little over 3 yrs)
at this moment we are in the same boat
Still it is a soft brick ..with Note II T889 there is issue, usually it happen when battery drains out completely .....
once I replace the charging port and put OEM battery will let u know.
I am not sure that I can share ebay links here ....
********did u try to connect via odin in download mode ???

No, I have not tried to connect ODIN. I tried Samsung Kies and it does not see it. At this moment, I have no way to charge my battery or check battery level so I don't want to reflash the stock firmware (yet), otherwise, if it dies in the middle I guess I will be in bigger trouble
Mine was running stock Samsung 4.1.2 and rooted. Yesterday, it was working fine then it rebooted itself and hung on "Galaxy Note II" screen forever...

testrider said:
No, I have not tried to connect ODIN. I tried Samsung Kies and it does not see it. At this moment, I have no way to charge my battery or check battery level so I don't want to reflash the stock firmware (yet), otherwise, if it dies in the middle I guess I will be in bigger trouble
Mine was running stock Samsung 4.1.2 and rooted. Yesterday, it was working fine then it rebooted itself and hung on "Galaxy Note II" screen forever...
Click to expand...
Click to collapse
here is the update
I have replaced the charging port ....Now my phone is getting picked by Odin ..going to flash the stock ROm first tonight
hope it helps you ........Also I am pretty sure battery got some issues too .........

I just reflash the stock Samsung 4.1.2 firmware (downloaded from sammobile) and while ODIN completed successfully, the same thing happened. It still stuck on "Galaxy Note II". here was the progress (ODIN connected to it just fine) and I still could not get into RECOVERY by VOL_UP+HOME+POWER.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> modem.bin
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> sboot.bin
<ID:0/005> tz.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)

testrider said:
I just reflash the stock Samsung 4.1.2 firmware (downloaded from sammobile) and while ODIN completed successfully, the same thing happened. It still stuck on "Galaxy Note II". here was the progress (ODIN connected to it just fine) and I still could not get into RECOVERY by VOL_UP+HOME+POWER.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> modem.bin
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> sboot.bin
<ID:0/005> tz.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
check this page : Do I need to reset the Binary flash counter when already tripped?
http://www.androidayos.com/2013/04/...note-2-sgh-t889-to-original-stockromfirmware/

No you don't. You reset it only when you want to send it back to Samsung for warranty and you don't want them to know.
It doesn't affect the flashing of stock firmware.
---------- Post added at 02:35 PM ---------- Previous post was at 02:33 PM ----------
I was running stock 4.1.2, T889UVBMD1, so that was the firmware I downloaded. Unfortunately, after successfully flashing it, it still stuck at the logo!

testrider said:
No you don't. You reset it only when you want to send it back to Samsung for warranty and you don't want them to know.
It doesn't affect the flashing of stock firmware.
---------- Post added at 02:35 PM ---------- Previous post was at 02:33 PM ----------
I was running stock 4.1.2, T889UVBMD1, so that was the firmware I downloaded. Unfortunately, after successfully flashing it, it still stuck at the logo!
Click to expand...
Click to collapse
I am back online
Used odin 3 v 3.10 ...
Stock T889UVUCOH4_T889TMBCOH4_TMB >> 4.3 Jelly Bean
USB Driver 1.5.49.0 (5.0)
Links :
http://androidromupdate.com/tmobile-galaxy-note-2-sgh-t889-stock-firmware/

It's working for you now? What was the Android version you were running before this happened?

I just used ODIN 3.10 and flashed the same stock Stock T889UVUCOH4_T889TMBCOH4_TMB and it still stuck at the logo...
Everything was completed successfully but it still stuck...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T889UVUCOH4_T889TMBCOH4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> tz.img
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> modem.bin
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)

testrider said:
I just used ODIN 3.10 and flashed the same stock Stock T889UVUCOH4_T889TMBCOH4_TMB and it still stuck at the logo...
Everything was completed successfully but it still stuck...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T889UVUCOH4_T889TMBCOH4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> tz.img
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> modem.bin
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
dont know what to say I am no pro here
with my old Charging port when I was plugging it shows me battery and inside circling and with cable when I open I saw samsung logo , I came across a link which said remove the Charging port which could be faulty ...
try that option too ...it cost me only $5.50 and 15 minutes to do the replacement ....
https://www.youtube.com/watch?v=l9e9vIqZOUo
http://www.ebay.com/itm/311475649835?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT

qazafee said:
I am back online
Used odin 3 v 3.10 ...
Stock T889UVUCOH4_T889TMBCOH4_TMB >> 4.3 Jelly Bean
USB Driver 1.5.49.0 (5.0)
Links :
http://androidromupdate.com/tmobile-galaxy-note-2-sgh-t889-stock-firmware/
Click to expand...
Click to collapse
What exactly did you do? Just use ODIN and flash the firmware? That was what I did but mine still stuck...

testrider said:
What exactly did you do? Just use ODIN and flash the firmware? That was what I did but mine still stuck...
Click to expand...
Click to collapse
buy the charging port ...it may be the reason ....
with old charging port ..it was not charging but was still able to bring up logo/Battery sign ....
so it was not completely damaged ...there is no harm in buying only 5.50 ...

I already bought a brand new Samsung battery. I also borrowed a friend's Note 2 to charge the battery before putting it in my dead phone. No luck.
---------- Post added at 08:25 PM ---------- Previous post was at 08:20 PM ----------
I guess I can give it a try...
You replaced the port and did it boot all the way? You said you flashed the stock firmware too? If the port was working after you replaced it, why did you have to flash the stock rom?