Related
Hey guys,
I recently received an E4GT, and threw on Caulkin's latest rom with the FE22 modem. I notice that in comparison to other devices (iphone 4s, original samsung galaxy tab, OLD dell laptop) my phone can't receive signals that these other devices get. I was hoping for some assistance if possible. I searched through the forums and didn't really see anyone with the same exact problem. Any assistance is greatly appreciated.
Try flashing a different modem. Some modems work better than others and different devices prefer different modems. I'm actually using FE22 modem and it works great for me. Remember to update profile and prl after you change modem.
Here is more info http://forum.xda-developers.com/showthread.php?t=1352310
someguyatx said:
Try flashing a different modem. Some modems work better than others and different devices prefer different modems. I'm actually using FE22 modem and it works great for me. Remember to update profile and prl after you change modem.
Here is more info http://forum.xda-developers.com/showthread.php?t=1352310
Click to expand...
Click to collapse
How do I update the PRL and profile? I dont see a how to for that :crying:
Anyone able to help me out pleaaase
Also, the prl would affect wifi?
nx1no said:
How do I update the PRL and profile? I dont see a how to for that :crying:
Click to expand...
Click to collapse
Go to system setting... System updates.. Update prl and profile! :thumbup:
nx1no said:
Anyone able to help me out pleaaase
Also, the prl would affect wifi?
Click to expand...
Click to collapse
To update, (from home screen) MENU>SYSTEM SETTINGS>(scroll all the way down)ABOUT PHONE>SYSTEM UPDATE.
As far as affecting the wifi I am at a lose, sorry.
Yeah my original question was asking why my device gets poor wifi reception, when other devices side by side get better reception...does the modem and prl affect this? What else could it be
nx1no said:
Hey guys,
I recently received an E4GT, and threw on Caulkin's latest rom with the FE22 modem. I notice that in comparison to other devices (iphone 4s, original samsung galaxy tab, OLD dell laptop) my phone can't receive signals that these other devices get. I was hoping for some assistance if possible. I searched through the forums and didn't really see anyone with the same exact problem. Any assistance is greatly appreciated.
Click to expand...
Click to collapse
You may want to try one of the later builds to see if it will help. Also doing a clean install helped me when I had problems.
nx1no said:
Yeah my original question was asking why my device gets poor wifi reception, when other devices side by side get better reception...does the modem and prl affect this? What else could it be
Click to expand...
Click to collapse
Yes the modem affects wifi signal strength. Updating the prl and profile is something you do after flashing a new modem or a new rom. A prl update has nothing to do with wifi but it helps data and voice. Feel free to search for better definitions if you want more info.
nx1no said:
Hey guys,
I recently received an E4GT, and threw on Caulkin's latest rom with the FE22 modem. I notice that in comparison to other devices (iphone 4s, original samsung galaxy tab, OLD dell laptop) my phone can't receive signals that these other devices get. I was hoping for some assistance if possible. I searched through the forums and didn't really see anyone with the same exact problem. Any assistance is greatly appreciated.
Click to expand...
Click to collapse
Also check ur wifi settings....go to wifi and hit the menu button for advanced. Might be ur phone is looking for dual band connections. There is also a wifi fixer app in the market but I'm not positive on its usefulness
Sent from my SPH-D710 using xda app-developers app
dante32278 said:
Also check ur wifi settings....go to wifi and hit the menu button for advanced. Might be ur phone is looking for dual band connections. There is also a wifi fixer app in the market but I'm not positive on its usefulness
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
It is set to auto, looking for both. Should I set it to one or the other? Which one should it be?
I love JB - it's very smooth. True it's still in kang stage but am consistently getting dropped calls. Either I cannot hear the caller or vice versa. The workaround has to call 2 or 3 times then i get a clear voice connection. I looked in the development forums and nobody seems to address this issue. Being a new xda member am not able to post in the CM10 Kang thread.
Epic 4g/ 0726 gapps/0730 build/fc09
mbezite said:
I love JB - it's very smooth. True it's still in kang stage but am consistently getting dropped calls. Either I cannot hear the caller or vice versa. The workaround has to call 2 or 3 times then i get a clear voice connection. I looked in the development forums and nobody seems to address this issue. Being a new xda member am not able to post in the CM10 Kang thread.
Epic 4g/ 0726 gapps/0730 build/fc09
Click to expand...
Click to collapse
Hmmmm... never had that happen before.. how is the signal where you are it, is it possible that signal is just super flaky? Have you tried using odin or heimdall to flash a new modem?
flastnoles11 said:
Hmmmm... never had that happen before.. how is the signal where you are it, is it possible that signal is just super flaky? Have you tried using odin or heimdall to flash a new modem?
Click to expand...
Click to collapse
I live in a 4G zone so I always have all 3G and 4G bars full all the time with this and other roms. This is the first ROM am having connection issues with. I flashed fc09 about a month ago and was on cm9 and aokp with no connection issues. Only flashed cm10 last week with different builds and they all seem to have this connection issue. What modem are u recommending?
mbezite said:
I live in a 4G zone so I always have all 3G and 4G bars full all the time with this and other roms. This is the first ROM am having connection issues with. I flashed fc09 about a month ago and was on cm9 and aokp with no connection issues. Only flashed cm10 last week with different builds and they all seem to have this connection issue. What modem are u recommending?
Click to expand...
Click to collapse
The best modem is the one that works best for you... and 3g and 4g run off of different towers.. I also live in a 4g area, and while 4g is pretty reliable 3g can crap out pretty often... just try a different modem and if that don't help I can bring this up in the cm10 thread to see if anyone else is experiencing this or if there are more things you can try....
You should have posted this in the CM10 thread. Instead of creating a new one.
Also, I have no clue.
darkierawr said:
You should have posted this in the CM10 thread. Instead of creating a new one.
Also, I have no clue.
Click to expand...
Click to collapse
He can't... not enough posts yet....
flastnoles11 said:
He can't... not enough posts yet....
Click to expand...
Click to collapse
I have the same problem... here's where lurking sucks.... when you finally either need help or have something good to say.... you can't say anything other than to curse the noobs that came before and ruined it for you....
gfdos.sys said:
I have the same problem... here's where lurking sucks.... when you finally either need help or have something good to say.... you can't say anything other than to curse the noobs that came before and ruined it for you....
Click to expand...
Click to collapse
Just lurk around q&a and general and if you see something you can CONTRIBUTE (did ya catch the key word there) to, go for it... you'll have that 10 post count in no time! I got it in the first day trying to figure out how to make the stock headphones buttons work with the music player... and figured it out that first day to... ahhh memories... lol
flastnoles11 said:
Just lurk around q&a and general and if you see something you can CONTRIBUTE (did ya catch the key word there) to, go for it... you'll have that 10 post count in no time! I got it in the first day trying to figure out how to make the stock headphones buttons work with the music player... and figured it out that first day to... ahhh memories... lol
Click to expand...
Click to collapse
I will odin FC19 and hope the call connection is way better than FC09.
mbezite said:
I will odin FC19 and hope the call connection is way better than FC09.
Click to expand...
Click to collapse
Decided to go back to aokp m6 after the broken call connection was still evident in all FC19/FC09/EL30 modems. Thanks everyone for the help. I'll try Jelly Bean some other time. The devs are already doing a lot porting JB to Epic. Now seriously considering getting the SIII.
mbezite said:
Decided to go back to aokp m6 after the broken call connection was still evident in all FC19/FC09/EL30 modems. Thanks everyone for the help. I'll try Jelly Bean some other time. The devs are already doing a lot porting JB to Epic. Now seriously considering getting the SIII.
Click to expand...
Click to collapse
Update: I went to a Sprint store and they confirmed(admitted) the call connection issues were being caused by the ongoing 4g lte tower by tower upgrades. Thought i'd post this update in case someone else needs it.
Answering
Does Any Body Have The Problem When Answering A Call, It Wont Let Me Pick Up, Just Deny
Titles says it all. I live in the baltimore MD area, and where i used to get 3-4 bars of 4g it wont connect to it anymore. I boot it up and it defaults to 3G. Ive tried playing with the mobile data settings and nothing has worked.
Does anyone have any ideas...because i use my phones data connection as home internet right now...
How long has it been happening? It possible the tower is being worked on.
Sent from my SPH-L710 using xda app-developers app
CrfEpic4g said:
How long has it been happening? It possible the tower is being worked on.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
It just started today. Im on CM10 and i would occasionally lose a 4g connection and would have to swtich the mode from lte/whatever/whatever to the other mode...and then back to reconnect..but thats not working anymore....
Edit: This is killing me because I use it for home internet. Im paranoid simply because this is the first month ive used 4G ever...meaning i never even turned lte mode on in the mobile data settings..i didnt even know it was in my area until the beginning of this month.. Im just wondering if me toggling it on and off to get it to connect through CM10 caused this... Thats why im coming here..to smarter people then myself begging and pleaing for assistance and guidance.
Could it perhaps be that sprint was just testing my area for 4g?? OR how long does tower maintenance usually take.. Or that they cut me off from using 4g after using 30gb so far? I mean i have an unlimited plan so it shouldnt be an issue
No they didnt cut you off, they would send a letter before doing that
Second, it usually takes about 2-3 weeks for maintenance to complete on a tower. If you're really concerned, call Sprint and ask if they're in the process of upgrading towers in your area. Who knows, they might even give you some sort of "we're sorry for the inconvenience" credit
Sent from my PG06100
CNexus said:
No they didnt cut you off, they would send a letter before doing that
Second, it usually takes about 2-3 weeks for maintenance to complete on a tower. If you're really concerned, call Sprint and ask if they're in the process of upgrading towers in your area. Who knows, they might even give you some sort of "we're sorry for the inconvenience" credit
Sent from my PG06100
Click to expand...
Click to collapse
Im eyeballing this thread like a hawk for opinions and posts like this. Thanks for your input.
When I first used 4G It was actually by accident on the CM10.1 Nightly. I pressed the Mobile data toggle square in the settings and i saw 4g, I was thrilled that it was in my area. Switched back to stable CM10 and checked if it was up and running. and much to my surprise it wasnt some weird graphical error just showing the 4g icon. It was legit working.
Still isnt working on any rom ive flashed here. Now though since the issue began.
What are the chances in the short time ive used it, that i could have possibly damaged my phones abaility to connect to 4G? Sorry if that question is dumb.
Very little. I doubt that its a hardware issue, because if it were, you would see other things like core apps FCing, the other radios taking longer to connect, maybe even hot reboots when trying to turn on 4G
Like I said, when you have time call Sprint. Most likely the towers are being worked on and they turned it off meanwhile
You might wanna also wanna get Sensorly (from the Play Store) just to doublecheck for LTE in your area
Sent from my PG06100
When 4G lte came on in my area it was on for a couple of weeks then they shut it down for 4 or 5 days then it came on and it's been on for almost 3 months. Just fyi this might be what's going on.
Transmitted with a portable device using Xparent Blue Tapatalk 2
Wow thanks guys, you have put my mind at ease about all this. I was just so paranoid that I had specifically done something to the radio. So ill make a call to sprint to see whats up.
Thanks given to all !
XxsydenxX said:
Wow thanks guys, you have put my mind at ease about all this. I was just so paranoid that I had specifically done something to the radio. So ill make a call to sprint to see whats up.
Thanks given to all !
Click to expand...
Click to collapse
No problem, let us know if the issue is on their side
Sent from my PG06100
I'm experiencing the similar issues, though I flashed over a ASOP Rom that has parts from cm10.1 though the Rom was ported from Verizon, but 4g worked perfectly fine, then when I flashed back to cm10 it stopped working. I'm debating on flashing back to that rom and see if it also does not have access to 4g at this time.
Edit/Update: I flashed back to my stock rom with root then flashed an updated MA6 Rom, updated the PRL, Profile and such, still no 4G. Decided that I'd mess with a few 4g settings, still problems. Then I flashed back to CM10 and my 4G works again.
IcerJo said:
I'm experiencing the similar issues, though I flashed over a ASOP Rom that has parts from cm10.1 though the Rom was ported from Verizon, but 4g worked perfectly fine, then when I flashed back to cm10 it stopped working. I'm debating on flashing back to that rom and see if it also does not have access to 4g at this time.
Click to expand...
Click to collapse
Do that and post the results here, i will do the same. Sprint was less then helpful with this situation not giving me heads or tails over the phone.
XxsydenxX said:
Do that and post the results here, i will do the same. Sprint was less then helpful with this situation not giving me heads or tails over the phone.
Click to expand...
Click to collapse
Right before you posted your reply I had updated my post.
Update: I flashed back to my stock rom with root then flashed an updated MA6 Rom, updated the PRL, Profile and such, still no 4G. Decided that I'd mess with a few 4g settings, still problems. Then I flashed back to CM10 and my 4G works again.
I used http://forum.xda-developers.com/showthread.php?t=1910947
odex MA6, MA6 firmware and Stock MA6 kernel
and I accessed the LTE Mode Menu from the following
http://forum.xda-developers.com/showthread.php?t=1815580
I don't think the LTE Mode menu needs to be utlized but I did see some interesting settings in there.
IcerJo said:
Right before you posted your reply I had updated my post.
Update: I flashed back to my stock rom with root then flashed an updated MA6 Rom, updated the PRL, Profile and such, still no 4G. Decided that I'd mess with a few 4g settings, still problems. Then I flashed back to CM10 and my 4G works again.
I used http://forum.xda-developers.com/showthread.php?t=1910947
odex MA6, MA6 firmware and Stock MA6 kernel
and I accessed the LTE Mode Menu from the following
http://forum.xda-developers.com/showthread.php?t=1815580
I don't think the LTE Mode menu needs to be utlized but I did see some interesting settings in there.
Click to expand...
Click to collapse
Thats a bit of work, so this could possibly be some janky setting on my phone still huh?
EDIT: I dont have my stock rom backed up. Dont know what happened to it. Could you explain what exactly I need to do to achieve the results you have posted man?
Sorry for the late reply. It could possibly be a setting on your phone. I say make a backup of your rom, flash a stock based rom, kernel & firmware, if it's not ma6 find an update or one based on it. Update the prl and profile. See if you can get 4g working on tw, if not then either restore back to cm10 or try messing with the lte settings, their are some that allow you to enable or disable and such. I also do recall a setting for ehpd 4g or lte 4G. After messing with them try restoring back to cm10. If you take a picture of the lte menu I can look and tell you what settings I clicked.
Edit: Just looked at the link try the lte force cause I know I pushed that button as well as a few others.
Sent from my SPH-L710
IcerJo said:
Sorry for the late reply. It could possibly be a setting on your phone. I say make a backup of your rom, flash a stock based rom, kernel & firmware, if it's not ma6 find an update or one based on it. Update the prl and profile. See if you can get 4g working on tw, if not then either restore back to cm10 or try messing with the lte settings, their are some that allow you to enable or disable and such. I also do recall a setting for ehpd 4g or lte 4G. After messing with them try restoring back to cm10. If you take a picture of the lte menu I can look and tell you what settings I clicked.
Edit: Just looked at the link try the lte force cause I know I pushed that button as well as a few others.
Sent from my SPH-L710
Click to expand...
Click to collapse
Could you suggest a good stock based rom perhaps, sorry for the inconvenience. Because like as soon as i got my S3 i rooted and installed cm10. I didnt have stock for more then 5 minutes.
XxsydenxX said:
Could you suggest a good stock based rom perhaps, sorry for the inconvenience. Because like as soon as i got my S3 i rooted and installed cm10. I didnt have stock for more then 5 minutes.
Click to expand...
Click to collapse
I'm looking through the forums and so far the only stock with root only is what I linked above but those are mianly updates. One Possibility if its not a problem I'd sugged Unrooting with odin and flashing a stock rom, reroot then flash the update linked above, then just make a Backup Called Stock with root MA6 or something. I'll keep looking though.
XxsydenxX said:
Could you suggest a good stock based rom perhaps, sorry for the inconvenience. Because like as soon as i got my S3 i rooted and installed cm10. I didnt have stock for more then 5 minutes.
Click to expand...
Click to collapse
Try The Peoples Rom it is stock based TW rom. It is fantastic and everything works.
Transmitted with a portable device using Xparent Blue Tapatalk 2
IcerJo said:
I'm looking through the forums and so far the only stock with root only is what I linked above but those are mianly updates. One Possibility if its not a problem I'd sugged Unrooting with odin and flashing a stock rom, reroot then flash the update linked above, then just make a Backup Called Stock with root MA6 or something. I'll keep looking though.
Click to expand...
Click to collapse
Unrooted, stocked it up. 4g didnt work. Re rooted..installed cm10 stable 4g worked. Seems like a consistent fix for this bug. Solved.
XxsydenxX said:
Unrooted, stocked it up. 4g didnt work. Re rooted..installed cm10 stable 4g worked. Seems like a consistent fix for this bug. Solved.
Click to expand...
Click to collapse
Good to hear that it's working for you as well ^_^
Sent from my SPH-L710
IcerJo said:
Right before you posted your reply I had updated my post.
Update: I flashed back to my stock rom with root then flashed an updated MA6 Rom, updated the PRL, Profile and such, still no 4G. Decided that I'd mess with a few 4g settings, still problems. Then I flashed back to CM10 and my 4G works again.
I used http://forum.xda-developers.com/showthread.php?t=1910947
odex MA6, MA6 firmware and Stock MA6 kernel
and I accessed the LTE Mode Menu from the following
http://forum.xda-developers.com/showthread.php?t=1815580
I don't think the LTE Mode menu needs to be utlized but I did see some interesting settings in there.
Click to expand...
Click to collapse
I just had this issue after flashing that Rootbox ROM which was ported from Verizon. I performed the above steps and everything's working fine.
THANKS!
Ok, So I have an Epic 4g flashed to Cricket, I have made everything work(mms,test,talk,ect.) I have it on Android 4.1.2. My problem is I only get 3G and its not very dependable. I live in Phoenix, A.Z. Anyone have any ideas on what to do?
Did you change anything with the phone recently? Did you recently move homes?
Sent from my SPH-D700 using Tapatalk 2
Ihave not moved at all....
Sent from my SPH-D700 using xda app-developers app
shaunfrazier said:
Ihave not moved at all....
Sent from my SPH-D700 using xda app-developers app
Click to expand...
Click to collapse
Ok, and what of the first question.
How do I fix the data problem.. I can't just use 3g it not stable in phx. Goes in and out a lot even sitting still and not moving the phone.
Sent from my SPH-D700 using xda app-developers app
shaunfrazier said:
How do I fix the data problem.. I can't just use 3g it not stable in phx. Goes in and out a lot even sitting still and not moving the phone.
Sent from my SPH-D700 using xda app-developers app
Click to expand...
Click to collapse
Look, I'm trying to assist you. If all you are going to do is plead for help over and over again without providing answers, then I cannot help you.
Have you done anything to the phone since you last had stable connections?
nikon120 said:
Look, I'm trying to assist you. If all you are going to do is plead for help over and over again without providing answers, then I cannot help you.
Have you done anything to the phone since you last had stable connections?
Click to expand...
Click to collapse
I think he's implying that that's how it's always been, or possibly that he has done all of this within the last few days. However long it's been, to me it doesn't sound like a recent issue that has cropped up.
Just my obversvation though. Unfortunately that's all the help I can offer heh
Burban502 said:
I think he's implying that that's how it's always been, or possibly that he has done all of this within the last few days. However long it's been, to me it doesn't sound like a recent issue that has cropped up.
Just my obversvation though. Unfortunately that's all the help I can offer heh
Click to expand...
Click to collapse
Well, you're reading into what he typed; which means that he wasn't clear. lol
nikon120 said:
Well, you're reading into what he typed; which means that he wasn't clear. lol
Click to expand...
Click to collapse
haha Definitely no argument there! :highfive:
So hears what happen, I bought this phone 2 months ago I rooted the phone than flashed acouring to a tutorial I found on this site. (http://forum.xda-developers.com/showthread.php?t=780742)
After that I instealed the Provision Rom
(http://forum.xda-developers.com/showthread.php?t=2129233)
After that I flashed the Cricket mms fix found here
(http://forum.xda-developers.com/showthread.php?t=1649508&highlight=cricket+mms)
So I did not notice the 3g to 2g/1g switch because most of the time I am around wifi.. I have changed it since then or added anything.. I hope this is a better disription...
thanks
shaunfrazier said:
So hears what happen, I bought this phone 2 months ago I rooted the phone than flashed acouring to a tutorial I found on this site. (http://forum.xda-developers.com/showthread.php?t=780742)
After that I instealed the Provision Rom
(http://forum.xda-developers.com/showthread.php?t=2129233)
After that I flashed the Cricket mms fix found here
(http://forum.xda-developers.com/showthread.php?t=1649508&highlight=cricket+mms)
So I did not notice the 3g to 2g/1g switch because most of the time I am around wifi.. I have changed it since then or added anything.. I hope this is a better disription...
thanks
Click to expand...
Click to collapse
I don't use a MVNO, so I am not sure which regular troubleshooting steps would clear away your carrier settings. (I'm thinking using EFS Clear in Odin is the only concern, but that is sometimes needed for modem issues.)
Based off that rom's thread, you must be using the NS4G modem. Since your issue is with connectivity:
Perform a CWM backup of your current setup.
Flash an Epic modem rom and FC09 modem. (You can flash the modem using CWM. There's a thread in the dev forum w/ links.)
Try testing connection again.
I'd normally tell a Sprint Epic user to boot into FC09 multiboot and update profile & PRL, but I don't even think the PRL update would work for you. I'd then say, start from scratch by using Odin to flash FC09 with repartition checked. If they still had issues with connectivity, then I'd recommend using EFS clear in Odin when reflashing either just the FC09 modem or the entire FC09 tar.
Because you are on another carrier, I'm weary of suggesting you use Odin so quickly. If you haven't already, dive into your phone settings and document your carrier specific info you changed to get it working. This way, if you end up doing something that resets your original changes, then you can reconfigure it.
So give the suggestion that is listed above a try.
Since I'm very much a noob myself, I'm only tossing this out to possibly trigger an idea for someone else: Would perhaps the issue lie in the Build.prop or one of those similar files? I've poked around so many of them I can't remember which hold what tidbits of info... I know the Build.prop holds most of the primary carrier info, but I seem to recall another one that stored a bunch of info for a bunch of the other carriers (though that might have been for roaming and may not be of any help here).
*shrug* Otherwise, I's gots nothin' lol
Hello Guys,
I am having WIFI Tether issues with any custom AOSP or AOKP rom. Installing a touchwiz related rom somehow resolves the tethering issues.
I've trying all the usual steps before installing a custom rom including wiping everything, factory reset and all that good stuff. But the native tether wont work on these roms. I tried the wifi tether apps in the app store but no success there.
However, what really gets to my nerves is that my daily driver is 4.1.2 liquid smooth rc7 version of the rom which i assume is based on aosp does allow wifi tether but only through the app in the app store. The native app continues to fail.
Someone once told me to install the wifi driver for the phone. Is that possible? If so how? By the way i am running a rogers s3 which is the at&t equivalent in US.
Also, just so you guys know, my other devices do pick up the wireless set up by my phone's tether, but it wont connect to it. password or not, it takes forever to connect and eventually fails.
Any advice?
gutlessmerc said:
Hello Guys,
I am having WIFI Tether issues with any custom AOSP or AOKP rom. Installing a touchwiz related rom somehow resolves the tethering issues.
I've trying all the usual steps before installing a custom rom including wiping everything, factory reset and all that good stuff. But the native tether wont work on these roms. I tried the wifi tether apps in the app store but no success there.
However, what really gets to my nerves is that my daily driver is 4.1.2 liquid smooth rc7 version of the rom which i assume is based on aosp does allow wifi tether but only through the app in the app store. The native app continues to fail.
Someone once told me to install the wifi driver for the phone. Is that possible? If so how? By the way i am running a rogers s3 which is the at&t equivalent in US.
Also, just so you guys know, my other devices do pick up the wireless set up by my phone's tether, but it wont connect to it. password or not, it takes forever to connect and eventually fails.
Any advice?
Click to expand...
Click to collapse
If you carrier is Rogers, you need to make some mods to tether 4G (H+, 3G will work w/o mods). There's a post about it somewhere in Task's AOKP thread, which I believe a search should find it. Google can also help.
Same issue here, Rogers LTE tethering didn't work and tried to google and find the mods as posted.
couldn't find the mods.
Please advise.
BWolf56 said:
If you carrier is Rogers, you need to make some mods to tether 4G (H+, 3G will work w/o mods). There's a post about it somewhere in Task's AOKP thread, which I believe a search should find it. Google can also help.
Click to expand...
Click to collapse
detdett said:
Same issue here, Rogers LTE tethering didn't work and tried to google and find the mods as posted.
couldn't find the mods.
Please advise.
Click to expand...
Click to collapse
Took me 5min... http://forum.xda-developers.com/showpost.php?p=37174490&postcount=21220
Thanks
BWolf56 said:
Took me 5min... http://forum.xda-developers.com/showpost.php?p=37174490&postcount=21220
Click to expand...
Click to collapse
Wow!!
Thank you sooooo soooo much. I spent hours trying to figure a way out to get the tethering to fix. This worked out super easily. You've honestly saved me hours i wouldve spent.
Thank you for persisting with the solution for us.
Cheers.
Yeah, Thanks for the link too
However I am not able to get LTE tethering speed
I am able to get LTE speed (10mbps+) on my S3, however the device that's using the tethering only able to get (~1mbps)
any idea?
gutlessmerc said:
Wow!!
Thank you sooooo soooo much. I spent hours trying to figure a way out to get the tethering to fix. This worked out super easily. You've honestly saved me hours i wouldve spent.
Thank you for persisting with the solution for us.
Cheers.
Click to expand...
Click to collapse
detdett said:
Yeah, Thanks for the link too
However I am not able to get LTE tethering speed
I am able to get LTE speed (10mbps+) on my S3, however the device that's using the tethering only able to get (~1mbps)
any idea?
Click to expand...
Click to collapse
It's dependent of the device receiving it. If it's too old or it's drivers are too old it won't get the speed it should. Also tethering shares the connection, therefor, you won't get full speed on the receiving device.
Could be so many things actually that's it's hard to troubleshoot.
Thanks for the quick reply,
However, I am using CM10.1 latest Nightlies 04/26.
BWolf56 said:
It's dependent of the device receiving it. If it's too old or it's drivers are too old it won't get the speed it should. Also tethering shares the connection, therefor, you won't get full speed on the receiving device.
Could be so many things actually that's it's hard to troubleshoot.
Click to expand...
Click to collapse
detdett said:
Thanks for the quick reply,
However, I am using CM10.1 latest Nightlies 04/26.
Click to expand...
Click to collapse
I think you got me wrong.
Your S3 doesn't really matter here as much as the device receiving the connection.
BWolf56 said:
I think you got me wrong.
Your S3 doesn't really matter here as much as the device receiving the connection.
Click to expand...
Click to collapse
so what do you suggest in order to improve the data speed for the tethered device? or is there no way around this?
detdett said:
so what do you suggest in order to improve the data speed for the tethered device? or is there no way around this?
Click to expand...
Click to collapse
Like I said, it's dependent of so many things. First off, what device it receiving it? Is that device old? Are it's drivers up to date? Does it have a good reception/connectivity?
Did you try tethering to other devices?
BWolf56 said:
Like I said, it's dependent of so many things. First off, what device it receiving it? Is that device old? Are it's drivers up to date? Does it have a good reception/connectivity?
Did you try tethering to other devices?
Click to expand...
Click to collapse
I use it to tether my HP Touchpad running Jellybean 4.1.2 developed my J.C. Sullins. Link
detdett said:
I use it to tether my HP Touchpad running Jellybean 4.1.2 developed my J.C. Sullins. Link
Click to expand...
Click to collapse
Did you try USB, WiFi and BT tethering? (test their respective speed)
oh, Sorry,
I am using my laptop with windows 7.
BWolf56 said:
I think you got me wrong.
Your S3 doesn't really matter here as much as the device receiving the connection.
Click to expand...
Click to collapse