Related
So I got a new SGS3 and it works fine, except when I am in 3G. When I am in 3G I can receive and place calls but no data. Att support was no help, so I figured I would check here. As far as I can tell it is either a APN, Gateway, or Account settings issue (the later being something I can not do anything about). I say this because my n1 gets signal fine here, and it seems to run fine, so long as it is 4g.
Any ideas? Also, does the SGS3 have EDGE support?
partyk1d24 said:
So I got a new SGS3 and it works fine, except when I am in 3G. When I am in 3G I can receive and place calls but no data. Att support was no help, so I figured I would check here. As far as I can tell it is either a APN, Gateway, or Account settings issue (the later being something I can not do anything about). I say this because my n1 gets signal fine here, and it seems to run fine, so long as it is 4g.
Any ideas? Also, does the SGS3 have EDGE support?
Click to expand...
Click to collapse
Bump: And also I tried to set an old APN but that didn't help.
Have you rooted and flashed it or are you stock? If you are just stock...there is nothing this forum can do to help really.
tomtommy306 said:
Have you rooted and flashed it or are you stock? If you are just stock...there is nothing this forum can do to help really.
Click to expand...
Click to collapse
I have not rooted or anything, I have tried some APNs but I was hoping other people might help me out with something else to try. I don't really buy the whole " if you are stock... there is nothing that can be done" What if I was trying to get help with a stock developer build of my n1 (which I have previously) or are you asserting that without rooting I will not be able to fiddle with the modem settings?
What I'm saying is the phone comes ready out of the box. Unless you have changed something then it is a network problem. You will have to take it up with AT&T.
U can only do so much stock....and thats not alot! Root and use stock rom so u will have root access to see whats what...and to be able to control what u do or dont want ur data to do
red s3 ocd 2.1
JB calhoun said:
U can only do so much stock....and thats not alot! Root and use stock rom so u will have root access to see whats what...and to be able to control what u do or dont want ur data to do
red s3 ocd 2.1
Click to expand...
Click to collapse
Thank you guys for trying to help but I know all this. I am just in the period of time I can take it back and I don't want to risk that by bricking it while monkeying around.
I (Maybe) have isolated the problem, they said that I was set up for LTE and there are some issues with proper propagation of properties. Anyway problem "May" only effect people on ATT with Samsung S3s bought at BestBuy locations and the upgrade includes unlimited data. Still working will update tonight....
BUMP!
'm gonna try and make a long story short. Yesterday I purchased A S3 from ATT..Everything was working fine right out of the box no problems, lte and everything..Well earlier today I rooted my phone and everything seemed to be fine, I even flashed a rom and that seemed to be running fine also, but I noticed when I flashed the rom on the tool bar where it shows what data your running other than Wifi, it said H, don't know what that would be but I know it wasen't lte....So I thought maybe something was wrong with my phone, so I took it to the att store and showed them I wasen't getting 4glte..So they looked on the compyter and everything looked right, then they took it to the back where the service center was and flashed it back to factory....AND WHAT DO YOU KNOW??? It worked...I got 4glte right away..It said it right on the toolbar..I was so happy its working again like it should be...So I get home and root the phone again..everything went fine with the root, well it seemed like it BUT WHAT DO YOU KNOW...YOU GUESSED IT..NO 4gLTE...WHAT is going on here...and this was just off a fresh root no roms or anything...So I'm stuck I don't know what to do or if anyone else has expierienced this or knows a fix...I really want to keep my phone rooted so I can run roms and programs like Titanium Backup
So if anyone knows and can help I'd really appriciate it...thanks for your help and time...
I'm keeping my fingers crossed
As you can see from the picture you can see 4g on the status bar, but check out the speeds...and I'm in a great spot for lte..so something is wrong
Its kind of normal that lte dont work on some roms, you could just stay stock and it will all work, Im not sure why root would kill your lte, how are you rooting?
shadyraver said:
'm gonna try and make a long story short. Yesterday I purchased A S3 from ATT..Everything was working fine right out of the box no problems, lte and everything..Well earlier today I rooted my phone and everything seemed to be fine, I even flashed a rom and that seemed to be running fine also, but I noticed when I flashed the rom on the tool bar where it shows what data your running other than Wifi, it said H, don't know what that would be but I know it wasen't lte....So I thought maybe something was wrong with my phone, so I took it to the att store and showed them I wasen't getting 4glte..So they looked on the compyter and everything looked right, then they took it to the back where the service center was and flashed it back to factory....AND WHAT DO YOU KNOW??? It worked...I got 4glte right away..It said it right on the toolbar..I was so happy its working again like it should be...So I get home and root the phone again..everything went fine with the root, well it seemed like it BUT WHAT DO YOU KNOW...YOU GUESSED IT..NO 4gLTE...WHAT is going on here...and this was just off a fresh root no roms or anything...So I'm stuck I don't know what to do or if anyone else has expierienced this or knows a fix...I really want to keep my phone rooted so I can run roms and programs like Titanium Backup
So if anyone knows and can help I'd really appriciate it...thanks for your help and time...
I'm keeping my fingers crossed
As you can see from the picture you can see 4g on the status bar, but check out the speeds...and I'm in a great spot for lte..so something is wrong
Click to expand...
Click to collapse
1st wrong thread, this has nothing to do with development, 2nd if ur getting 4g lte issues then speak to the company u got it from, because not alot of places can support lte atm its like a transition thats happenning 3rd what i can suggest you do is grab a tool like odin, and odin back to stock rom and then use snapdragon tool by mskip its the 2nd or 3rd from this forum up, and go from there and that should help u further on in getting back to normal , and if you're flashing jelly bean roms or what not, you have lte still but it'll show as 4g or what not, which rom have you flashed btw.
wali01x said:
1st wrong thread, this has nothing to do with development, 2nd if ur getting 4g lte issues then speak to the company u got it from, because not alot of places can support lte atm its like a transition thats happenning 3rd what i can suggest you do is grab a tool like odin, and odin back to stock rom and then use snapdragon tool by mskip its the 2nd or 3rd from this forum up, and go from there and that should help u further on in getting back to normal , and if you're flashing jelly bean roms or what not, you have lte still but it'll show as 4g or what not, which rom have you flashed btw.
Click to expand...
Click to collapse
You need to check your APN settings and make sure you're using the proper LTE APNs for your carrier and make sure that LTE is available in your area 100%.
Also you need to enable LTE on the mobile connections screen within whatever ROM you flash.
ka24e said:
You need to check your APN settings and make sure you're using the proper LTE APNs for your carrier and make sure that LTE is available in your area 100%.
Also you need to enable LTE on the mobile connections screen within whatever ROM you flash.
Click to expand...
Click to collapse
but he's saying he's flashing a rom and losing LTE, but apn most the times stick, thats why i was wondering which rom was it, because then we can let them know to make sure their apn sticks make its easier for anyone else that flashes.
I know first hand wali and his partner in crime have stellar ROMs flash one of those guarantee you won't be disappointed
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
It could also be that he has lte but the icons says 4G for lte I think it's the case for some roms. Because the phone companies made us believe that hsdpa+ was 4G when in fact it's more like 3.7G more or less. What I'm trying to say is did you do a speed test to make sure?
4G might just be lte after all.
Sent from my Nexus 7 using XDA Premium HD app
I know when on blackjelly it only shows 4 I believe but the speed test shows lte speeds.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
lets blame the companies for skrewing everything up with toggles.
run a speed test and look at more info and see what it shows, also check your apn settings via settings/more settings and mobile network then access point names and then take a screenshot if possible by holding power + home button and post it up, because if u should have LTE service ur apns must be LTE otherwise you will be defaulted to regular apn which might throttle you like whoa well i know our ics doesn't do that but not that i hate anyone's ics, Nun, Ariel and Kyan all have done a good job in their ics's.
I don't know if this helps but go to settings and then about, then status and check network, most likely says UMTS or well it does for me on ALL 4.1.1 rom's. But, go to mobile networks and try to connect to another provider than yours, then when it says it cannot connect, re-connect to your own and I bet you will get HS+. Only problem is, if you toggle on wifi or reboot, you will have to do this all over again to retain the higher network connection.
I have not been able to come up with a solution yet and do not know if it is a 747m problem only or if it effects 747 as well.
wali01x said:
lets blame the companies for skrewing everything up with toggles.
run a speed test and look at more info and see what it shows, also check your apn settings via settings/more settings and mobile network then access point names and then take a screenshot if possible by holding power + home button and post it up, because if u should have LTE service ur apns must be LTE otherwise you will be defaulted to regular apn which might throttle you like whoa well i know our ics doesn't do that but not that i hate anyone's ics, Nun, Ariel and Kyan all have done a good job in their ics's.
Click to expand...
Click to collapse
I'm trying to flash newer roms and I can't get data going anyone have any success
Up until a month ago everything was fine but not so anymore
Am I the only pageplus customer on these forums?
Can you update PRL and Profile via Wi-Fi? Report back your results
I did not try to update the prl when I tried these roms but I will
erickr13 said:
Can you update PRL and Profile via Wi-Fi? Report back your results
Click to expand...
Click to collapse
I updated the prl but I'm afraid I don't know what it means to update profile
erickr13 said:
Can you update PRL and Profile via Wi-Fi? Report back your results
Click to expand...
Click to collapse
the results of updating the prl were promising... I'm just downloading speedtest to see if I'm getting the speed I should
erickr13 said:
Can you update PRL and Profile via Wi-Fi? Report back your results
Click to expand...
Click to collapse
You are the man!!! I still don't know what profile is about but my speeds are what they should be thanks
Sorry that was a false alarm I accidentally flashed an old rom
Im glad it worked for you! I am not sure what updating PRL and Profile does but it works for data issues
Can you post your speeds that you mentioned you were measuring?
erickr13 said:
Im glad it worked for you! I am not sure what updating PRL and Profile does but it works for data issues
Can you post your speeds that you mentioned you were measuring?
Click to expand...
Click to collapse
actually it didn't work for me
Data is really weird for me right now... (a month ago it was fine) I'm constantly flashing new roms
I go between the pacman, liquidsmooth and cm remix
I actually thought it was a radio/prl/ programming issue but now think that it is a rom issue
My house gets horrible data about .4 megs (enough for streaming spotify)
My work gets awesome data about 2.2 megs
I'm about to flash the newest cm remix (because cm remix has been the most reliable when it comes to data
It is hard to believe that there are only two pp customers on this board
Actually I am on RingPlus so I guess that the stuff I do to fix my data issues after flashing a ROM will work on any Sprint network- based company.
Can you try flashing the latest Sprint radios? This link contains all the radios: http://forum.xda-developers.com/galaxy-nexus/sprint-develop/sprint-radio-collection-t2195481
I recommend flashing the radio GA02, report back with results please.
erickr13 said:
I am not sure what updating PRL and Profile does but it works for data issues
Click to expand...
Click to collapse
I've got a toroplus on Page Plus, and unfortunately the 'Update PRL and Profile' trick is no good for us. Page Plus uses Verizon's network, not Sprint's, so our phones have to be manually flashed using ETS and PRLs can be updated using a neat little app called CDMATools. (It's on the forum here somewhere, needs to be a system app) I'm thinking that 'Update Profile' is similar to *228 OTA programming on Verizon's network. That of course doesn't work either for us. The nearest equivalent involves setting up a donor phone, running *228 on that, then pulling the authentication keys from that and writing them to the Toroplus - not exactly something you want to do every day or two to get data working again. .
Do you have your 'preferred network type' set to 3G? May not help, but it's a thought. There are also some more involved network mode settings exposed in the CDMATools app., may be worth poking around in there. It sounds like you're getting good 3G speeds at work, not sure why it would be so slow at home.
Oh I see, I thought PP runs on Sprint network.
Also you mentioned that he need "CDMATools" right? Well installing VanirAOSP (A KK 4.4.2 ROM) will give you CDMATools as a system app if you cant manage to get the app by itself.
musical_chairs said:
I've got a toroplus on Page Plus, and unfortunately the 'Update PRL and Profile' trick is no good for us. Page Plus uses Verizon's network, not Sprint's, so our phones have to be manually flashed using ETS and PRLs can be updated using a neat little app called CDMATools. (It's on the forum here somewhere, needs to be a system app) I'm thinking that 'Update Profile' is similar to *228 OTA programming on Verizon's network. That of course doesn't work either for us. The nearest equivalent involves setting up a donor phone, running *228 on that, then pulling the authentication keys from that and writing them to the Toroplus - not exactly something you want to do every day or two to get data working again. .
Do you have your 'preferred network type' set to 3G? May not help, but it's a thought. There are also some more involved network mode settings exposed in the CDMATools app., may be worth poking around in there. It sounds like you're getting good 3G speeds at work, not sure why it would be so slow at home.
Click to expand...
Click to collapse
**EDIT** To start, I'd like to say that once you've configured your phone properly you can flash whichever ROM you'd like with no problem. I flash mine all of the time, it's great.
PRL stands for Preferred Roaming List. It's a bit of firmware(?) used to program the phone and tell it which cell towers to use. So far as I know, the newer the better.
The profile is the data profile. When you update this, it fine tunes the data settings and includes the information your phone needs to communicate with the network to negotiate your Internet/MMS access.
If you're on a Sprint-based provider, you'd normally be able to provide the information to the best of your ability (following a trustworthy guide) and then connect to wi-fi to have the final configuration updated. This is what I did, I had no data access until I did this part.
But... since you're on PagePlus(which is Verizon-based) I don't know how simple or difficult this is. It may be as simple as flashing a PagePlus PRL and a Verizon radio. It may be more complicated. There are guides like this one available that should be of some help. Just remember to follow the direction to the letter, a single screw up can result in you not having data or cell service, and even worse you may end up on the phone having to lie to PagePlus.
thanks so much for all of your responses
to be clear, Profiles are not for verizon based /PP users, correct????
Yeah I kind of figured out that Data was independent of rom after about a 2 day freak out session. I have activated data and mms through the long process which involved a donor phone etc.. hence the freak out session (about the thought of doing all over again)
That being said I think some of the newer roms are messing with the data somehow... maybe its the switching between wifi and data... I don't know but I'm on the newest cm remix which I like for a lot of reasons and get data
btw I have it set up on my phone (to save battery) that when my wifi is on my data is off and vice versa does anyone think that the constant switchin on and off is causing problems???
erickr13 said:
Also you mentioned that he need "CDMATools" right? Well installing VanirAOSP (A KK 4.4.2 ROM) will give you CDMATools as a system app if you cant manage to get the app by itself.
Click to expand...
Click to collapse
You can grab the .apk from a ROM like Vanir and push it to /system/app/, or use a flashable .zip like this one here:
http://forum.xda-developers.com/showpost.php?p=48083686&postcount=150
For bonus points, add CDMATools.apk to the list in /system/addon.d/70-gapps.sh and it will stay through flashing ROM upgrades, just like your gapps.
MoseIlla said:
PRL stands for Preferred Roaming List. It's a bit of firmware(?) used to program the phone and tell it which cell towers to use. So far as I know, the newer the better.
Click to expand...
Click to collapse
Not firmware, just a list of towers and networks - but you've got the idea. Here's a fairly recent PRL modified for a Sprint phone on PP, works well for me:
http://www.howardforums.com/showthr...ing-problem-Ver-53078?p=15256795#post15256795
But... since you're on PagePlus(which is Verizon-based) I don't know how simple or difficult this is. It may be as simple as flashing a PagePlus PRL and a Verizon radio.
Click to expand...
Click to collapse
Not Verizon radios, you need the Sprint one. Much more programmable. In fact, the only way to reprovision a Verizon GNex is to flash a modified Sprint CDMA radio. A Page Plus / Verizon prepaid PRL is needed though - that and the authentication keys which must be pulled from a donor phone.
uconnpat said:
thanks so much for all of your responses
to be clear, Profiles are not for verizon based /PP users, correct????
Click to expand...
Click to collapse
Correct. Mine tries to update its profile every time I reboot, maybe because I don't have the shared secrets for 3g data? The profile update always fails, says "can't connect to server." I say "OK" and move on. My 1x data works fine (if you're familiar with PP plans, I'm on the 12, so 3g would just let me chew through my 10Mb/mo. data a bit faster.)
musical_chairs said:
You can grab the .apk from a ROM like Vanir and push it to /system/app/, or use a flashable .zip like this one here:
http://forum.xda-developers.com/showpost.php?p=48083686&postcount=150
For bonus points, add CDMATools.apk to the list in /system/addon.d/70-gapps.sh and it will stay through flashing ROM upgrades, just like your gapps.
Not firmware, just a list of towers and networks - but you've got the idea. Here's a fairly recent PRL modified for a Sprint phone on PP, works well for me:
http://www.howardforums.com/showthr...ing-problem-Ver-53078?p=15256795#post15256795
Not Verizon radios, you need the Sprint one. Much more programmable. In fact, the only way to reprovision a Verizon GNex is to flash a modified Sprint CDMA radio. A Page Plus / Verizon prepaid PRL is needed though - that and the authentication keys which must be pulled from a donor phone.
Correct. Mine tries to update its profile every time I reboot, maybe because I don't have the shared secrets for 3g data? The profile update always fails, says "can't connect to server." I say "OK" and move on. My 1x data works fine (if you're familiar with PP plans, I'm on the 12, so 3g would just let me chew through my 10Mb/mo. data a bit faster.)
Click to expand...
Click to collapse
Thanks so much for this... right now I can get data but it takes a little longer to get working than I'm used to. sometimes I cant get data and about a few weeks back (at about the time my data problems began I did do #228 sel2 which I think updated my prl to 53401 (I didn't check it before hand. I'm flashing the prl you posted I'll report back soon
oh and I'm noticing horrible battery life on my cmremix but that would make sense because it is searching extra hard for towers ... right???
Thank you so much for this!!!!!!!!!!!!!!!
I downloaded vanir, changed the prl, backed up cdmatools so I could use it with any rom if need be and am flashing preferred rom now
will report back soon
says I'm on sprint... cool
the 3g icon works quickly and consistently
but there are two problems
one is that it is showing a '?' with a small version of the four bars
asking me to sign into the network
and speedtest is showing me network communication issues
I think its a 4g thing
I really think that is it... It is trying to get 4g and for the life of me I can't figure out how to tell it to stay away from 4g and just stick to 3g
uconnpat said:
I really think that is it... It is trying to get 4g and for the life of me I can't figure out how to tell it to stay away from 4g and just stick to 3g
Click to expand...
Click to collapse
Settings/Mobile Network Settings/Preferred Network Type/3G. At least that's where it's at in CM. Or, in CDMATools, Data Menu/Advanced/LTE off.
---------- Post added at 09:38 PM ---------- Previous post was at 09:30 PM ----------
uconnpat said:
Thanks so much for this... right now I can get data but it takes a little longer to get working than I'm used to. sometimes I cant get data and about a few weeks back (at about the time my data problems began I did do #228 sel2 which I think updated my prl to 53401 (I didn't check it before hand. I'm flashing the prl you posted I'll report back soon
oh and I'm noticing horrible battery life on my cmremix but that would make sense because it is searching extra hard for towers ... right???
Thank you so much for this!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Wait...*228 worked for you? I thought that was a no-go for us? But if it updated your PRL it must have at least sort of worked. I always thought I was never supposed to do a *228 as that would mess things up.
musical_chairs said:
Settings/Mobile Network Settings/Preferred Network Type/3G. At least that's where it's at in CM. Or, in CDMATools, Data Menu/Advanced/LTE off.
---------- Post added at 09:38 PM ---------- Previous post was at 09:30 PM ----------
Wait...*228 worked for you? I thought that was a no-go for us? But if it updated your PRL it must have at least sort of worked. I always thought I was never supposed to do a *228 as that would mess things up.
Click to expand...
Click to collapse
Yeah it worked and screwed things up!!! I think that is where I went wrong I did the *228 and got a new prl that didn't work well
But thanks to this thread I think I'm good again... I think I'm on the newest Pacman and so far so good but when I reboot it takes a while to normalize
Hoy hoy, my point and goal in this post is to get an answer for my question here. As well as a quick result to a Google search for anyone looking.
Text now is selling a galaxy s 3 for 99$. I had the T 999 model for T-Mobile and had good luck. But I know all too well the hazards of root.
So according to the info here, in the attached photos would I be in the right place. Also text now runs all the calling and texting thru data 4Glte so data is gone at 2Gb at that point there its all gotta be WiFi. Yam
WillieWonka1985 said:
Hoy hoy, my point and goal in this post is to get an answer for my question here. As well as a quick result to a Google search for anyone looking.
Text now is selling a galaxy s 3 for 99$. I had the T 999 model for T-Mobile and had good luck. But I know all too well the hazards of root.
So according to the info here, in the attached photos would I be in the right place. Also text now runs all the calling and texting thru data 4Glte so data is gone at 2Gb at that point there its all gotta be WiFi. Yam
Click to expand...
Click to collapse
You're in the right place
Im unsure if I will be able to use the native dialer. The stock Rom from this carrier always routes the calls thru the text now app. I have the bars for tower signal but it seems I won't be able to make calls unless I've a data connection, which will shut off completely once the allowed data is used. Then only works on wifi.
Am I doing something wrong or am I stuck with volte voice over lte?
And will this be changed during flash.
Any known hazards?
WillieWonka1985 said:
Im unsure if I will be able to use the native dialer. The stock Rom from this carrier always routes the calls thru the text now app. I have the bars for tower signal but it seems I won't be able to make calls unless I've a data connection, which will shut off completely once the allowed data is used. Then only works on wifi.
Am I doing something wrong or am I stuck with volte voice over lte?
And will this be changed during flash.
Any known hazards?
Click to expand...
Click to collapse
I dont know sprint nor this carrier well. But I can't say I've ever seen this before. (See attachment)
Under settings》 more》status》device status = "custom". What is this discribing?
WillieWonka1985 said:
Under settings》 more》status》device status = "custom". What is this discribing?
Click to expand...
Click to collapse
That you have modified the system
Okay well that makes sense because the phone number in settings and about phone is different than the phone number in text now and text now has rerouted any dials even from the native dialer over to their app to make calls. I wonder if I flash different ROM that has a native dialer allowed that I would call from the number in settings?
This root and flash will be very interesting I wonder what will happen I will definitely be posting the outcome.
I'll try and flash is stable rom and hope for the best
mattzeller said:
That you have modified the system
Click to expand...
Click to collapse
WillieWonka1985 said:
I'll try and flash is stable rom and hope for the boily a cwm toch. est
Click to expand...
Click to collapse
WillieWonka1985 said:
Im unsure if I will be able to use the native dialer. The stock Rom from this carrier always routes the calls thru the text now app. I have the bars for tower signal but it seems I won't be able to make calls unless I've a data connection, which will shut off completely once the allowed data is used. Then only works on wifi.
Am I doing something wrong or am I stuck with volte voice over lte?
And will this be changed during flash.
Any known hazards?
Click to expand...
Click to collapse
I went ahead and flashed an older Rom from 2013 the APN was not working properly. I should've pulled a log but didn't think of it. So I nand restored via cwm. Upon reboot I had two impassable errors logs providers stoped and android prosses.acore stopped surely the apn and latter issues are unrelated. Still I'm going to try and find a way around the apn issue. If it happens again (likely so) ill be sure to have a logcat .zip to flash as so not wasting time. Any suggestions for apn backup/restore apk's are helpfull. Thanks and sorry for the faulty question with no log for help to go on. Ill make sure I have one if I post again.
Running 10.2.1-d2tmo
Baseband is T999UVDLJC
SELinux is Permissive
I have no idea what is causing this issue, I'm not sure if my picture messages get sent...
How can I fix this or what ROM(s) would be better for me to have? I pretty much have no other issue that I can think of than this that I am having with this ROM.
Thank you for any and all help.
Is data enabled on your phone?
Yes, but I am usually connected to WiFi and I keep the 2g/edge data on usually. I have 3g/4g on if I'm using navigation.
I don't think I've had this problem before, but I only had this phone for a few months. Got it off eBay.
Not what to suggest. If it worked before and not now, maybe your carrier changed some settings?
Does this problem occur when running a stock ROM?
My sister-in-law had this problem. She doesn't have a data plan but does have sms and mms. Her carrier told her to enable data in order to get pictures.
I'm not sure, it's not something I noticed until recently.
Wow turn the WiFi off worked... That kinda sucks. Are there ways around this? My other phones didn't need me to do this, my other phones included g1, g2, and the s ii.
What's a good ROM to switch to that might not have this happening? Is there an app for this, radio, etc.?
Lastly where can I get the stock Roms that won't brick me lol?
Thank you for the help.
UKTone said:
I'm not sure, it's not something I noticed until recently.
Wow turn the WiFi off worked... That kinda sucks. Are there ways around this? My other phones didn't need me to do this, my other phones included g1, g2, and the s ii.
What's a good ROM to switch to that might not have this happening? Is there an app for this, radio, etc.?
Lastly where can I get the stock Roms that won't brick me lol?
Thank you for the help.
Click to expand...
Click to collapse
Sounds like a rom thing, you shouldn't have to disabled wifi for MMS. You can try another MMS app or switch to another rom or see if there is an update to it. No Roms will brick you in this section of the forum
Sent from my SM-G920T using Tapatalk