Is there any Indian 3 file firmware,,, i have tried all but couldn't find any one???So, If i have to use pit file so i have to use with with one file firmware or there is any Indian 3 file firmware??
Here you have Indian FW but I think they are only One Package.
It doesn't matter when flashing with .pit file.
Memphis_ said:
Here you have Indian FW but I think they are only One Package.
It doesn't matter when flashing with .pit file.
Click to expand...
Click to collapse
ok..thnks ..that's what i wanna know does it matter or not 3 file or one file ,,,
i have just tick these options??
pda
re partition
pit
pda
f rest time
auto reboot??
or there is something else??
No, it doesn't matter. The firmwares for Note 2 come with a single file, generally the Modem is included in the file. You can flash a Modem or a kernel separately later with Odin, if anything is wrong with your current one.
And in Odin you don't need to touch anything, the default settings are okay.
Sent from my GT-N7100 using Tapatalk 2
vasu1 said:
ok..thnks ..that's what i wanna know does it matter or not 3 file or one file ,,,
i have just tick these options??
pda
re partition
pit
pda
f rest time
auto reboot??
or there is something else??
Click to expand...
Click to collapse
Auto reboot is only useful if you want that the phone reboots itself once the firmware is flashed. You can also put the battery out.
There's nothing more before clicking on START expect usual advices about Odin: Run Odin as Admin, battery charged (>70%), Kies process are closed, official usb cable without any extension...
One or 3 files doesn't matter for me. The 3 files are useful if you only want to flash a specific partition like the modem.
what does NAND ERASE do???
I suggest you to do nothing with Nand erase... i have read it can brick ur phone..
Sent from my GT-N7100 using xda premium
Related
Hello everybody
First I want to apologize for the possible mistakes i'm french and my english is not perfect.
I have made a huge mistake. I've take a ROM made for the Gnote 1 and flashed it on my GNOTE 2, I even flashed the kernel and the modem.
I've tried to solve the problem with KIES by restore the microsoftware but i have a permanent bootloop.
I hope that my phone is not dead.
If anyone have a solution it will be great.
Thanks by advance.
Are you able to access recovery and use odin?
Sent from my GT-N7100 using xda premium
Yes I can use Odin an Download Mode.But my fear is after the update via Kies i think that debug mode is not enable.
You don't need USB debugging to be enabled while flashing in download mode. Just get the official ROM tar for your specific version of cell and flash it through Odin. Get a complete ROM from reliable source which should also include modem.
Sent from my GT-N7100 using Tapatalk 2
Ok i'm gonna made it. I'll tell you when it will finish
Thanks a lot
Flash stock ROM with pit
dr.ketan said:
Flash stock ROM with pit
Click to expand...
Click to collapse
Where can i find it ? When i download a rescue firmware in the specific thread there is only one file after unzip et no PIT file
Read first line on my signature
Post#1 have stock rom and post#4 you can find pit
If pit file is in zip then extract first then select for pit table (it will auto select reparations)
And select rom file for pda and flash
Sent from my GT-N7100 using xda premium
dr.ketan said:
Read first line on my signature
Post#1 have stock rom and post#4 you can find pit
If pit file is in zip then extract first then select for pit table (it will auto select reparations)
And select rom file for pda and flash
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Finally i send it to samsung because flash with odin give me the same issues bootloop
Hi everyone.
Samsung call me back to give me some news of my phone. They ask me 200$ to repair it, because they told me that the motherboard was damaged. Is there any solution ? They don't take the warranty because of the root. Is there a way to put the flash counter to zero with the recovery ? I mean flash a file by the recovery.
Thanks
So my phone just stopped working after two days of rooting. I decided to un root it and revert it back to stock with Odin. I downloaded the right file for my phone SGH-M919 but when I tried to flash it. I got there is no pit partition. I tried then using kies and that failed. So I googled s4 pit file and got to a thread that had it. But stupid me thinking that i9505 pit file is the same for my phone because Wikipedia said it was the quad core version which the tmobile is. So now i have a new error for flash.
Please help thank you
The stock tar or md5 file from Sammobile.com has the pit mappings in it.
Sent from my SGH-M919 using Tapatalk 2
elesbb said:
The stock tar or md5 file from Sammobile.com has the pit mappings in it.
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
So all I would need is that .tar and it would automatically fix the issue? Or do I have to extract the pit and use it another way? I've never had to deal with this myself but some one else is having the same problem and I'm trying to find the answer for the both of us really, I don't want to be blind if this were to happen to myself so I want to find what I need to correct it before it becomes a problem later.
Flash the stock .tar like the man said...
Sent from my SGH-M919 using xda app-developers app
Orical said:
So all I would need is that .tar and it would automatically fix the issue? Or do I have to extract the pit and use it another way? I've never had to deal with this myself but some one else is having the same problem and I'm trying to find the answer for the both of us really, I don't want to be blind if this were to happen to myself so I want to find what I need to correct it before it becomes a problem later.
Click to expand...
Click to collapse
Just use tar file place it in pda not pit section of odin . Click start after reboot you are back to stock.
Sent from my SGH-M919 using Tapatalk 2
richardlibeau said:
Just use tar file place it in pda not pit section of odin . Click start after reboot you are back to stock.
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
Sounds simple, I've been helping some one from here out a little and either he doesn't understand what he's doing or there's something else wrong that he doesn't know he did in the mean time but that's pretty simple for a fix. He's been "from what I gather" doing that same thing but when it starts it just hangs at the check in Odin. I told him it takes a few minutes before it actually shows progress but he's waited over an hour so maybe he did something to the partitions that's all I can think of that would cause this to happen but it's hard trying to figure out the problem when you don't have the device in hand.
Thanks for responding I'll send him the link to the thread.
Orical said:
Sounds simple, I've been helping some one from here out a little and either he doesn't understand what he's doing or there's something else wrong that he doesn't know he did in the mean time but that's pretty simple for a fix. He's been "from what I gather" doing that same thing but when it starts it just hangs at the check in Odin. I told him it takes a few minutes before it actually shows progress but he's waited over an hour so maybe he did something to the partitions that's all I can think of that would cause this to happen but it's hard trying to figure out the problem when you don't have the device in hand.
Thanks for responding I'll send him the link to the thread.
Click to expand...
Click to collapse
If it's hanging at the "check" in Odin, it's not even began to write things to the device. The "check" part is checking the tar file. So it may have just been an incomplete download of the tar file.
Sent from my SGH-M919 using Tapatalk 2
elesbb said:
If it's hanging at the "check" in Odin, it's not even began to write things to the device. The "check" part is checking the tar file. So it may have just been an incomplete download of the tar file.
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
That's what I thought too, it works for me so he must have flashed something he shouldn't have.
Sent from my SGH-M919 using xda premium
Same problem as above but still getting pit error
I have the same problem as the guy above. I tried to unroot and soft bricked my phone. Kies hasnt worked neither has anything I've read. I've tried the stock tar and modified tar file from this post ( http://forum.xda-developers.com/showthread.php?t=2258628) but still havent had much success. The tar check passes so I'm assuming the files are valid and I'm uploading the file in the PDA slot in Odin 3.07. But when the program runs it gets to (check pit mapping) then it says (device removed) then (device addded) then i get a failed message. Anyone have any ideas?
I'm using Galaxy S4 SGH-M919
Win 7 Home 64bit
So many variables, try original Odin 1.85, try a different USB cable and USB port on PC.
Pp.
sent from my P5113 using TouchPal mind control keyboard. (Beta)
Same problem. Nothing is working. I am using the SGH-M919 pit file, but still, Odin throws errors. "Re-partition operation failed"... I tried everything nothing wants to work so far. Any ideas?
Try using an original Samsung USB cable.
hello everyone ,
i want to ask something here ,,,,
my friend told me to upgrade his sga2 , from gb to jb and btw i get the XXMF1 from kryllos and it contains only 1 file . xxxx_Xxxx_HOME.tar.md5
so this is makin me freakin out because we need the .pit file and i get it from "Jellybean : How-To"
and at last , i got 1 pit file , and 1 firmware file..
now what i do on odin ?
im reallly noob at this friend .. because im using htc that completely different hardware ..
any advice ? thaaaankkkksssssss ..... :angel:
Put the md5 file In the PDA bit, leave the pit file for now, leave everything else. Don't tick repartition
Sent from my GT-I8160 using xda app-developers app
So , it will not brick the device than ?
Ok thankss ..
Sent from my hTC One S powered SourcE by FlyinGrub™
qazsxdcfv said:
So , it will not brick the device than ?
Ok thankss ..
Sent from my hTC One S powered SourcE by FlyinGrub™
Click to expand...
Click to collapse
It shouldn't, I'm not a real expert on this subject, if it does then I apologise
Sent from my GT-I8160 using xda app-developers app
To get from GB to JB first, i would use either the complete package that u got the pit file from (this should be f/w version XXMB2, use pit on this and select to repartition) and flash that, or handle the upgrade to JB via Kies.
then once that's happened just flash kyrillos' XXMF1 without using pit and without ticking repartition
Carpe-Dimi said:
To get from GB to JB first, i would use either the complete package that u got the pit file from (this should be f/w version XXMB2, use pit on this and select to repartition) and flash that, or handle the upgrade to JB via Kies.
then once that's happened just flash kyrillos' XXMF1 without using pit and without ticking repartition
Click to expand...
Click to collapse
I didnt used the .pit file BUT IT WORKS !! WITHOUT ERROR !!!
Sent from my hTC One S powered SourcE by FlyinGrub™
qazsxdcfv said:
I didnt used the .pit file BUT IT WORKS !! WITHOUT ERROR !!!
Sent from my hTC One S powered SourcE by FlyinGrub™
Click to expand...
Click to collapse
what about your RAM, is it 624 RAM?
Installing without repartitioning will made a broken RAM display. I don't know if the problem are affecting the phone process.
Long story short, directly after installing Swap Internal Sdcard to External Sdcard my phone rebooted into recovery mode saying that it could not mount /Data & /Cache. This was on Cyanogenmod 10.2 (latest nightly) and I was an idiot and tried to start over and failed at repartitioning my ROM. Does anyone have a ROM configuration directory tree for a PIT configuration so I can recovery my phone?
Model is: SPH-l900
Recovery: TWRP
This is my last resort D:
======Update======== 10/09/2013
I've done a lot of research, pretty much summed up my options. Since I do not have a PIT configuration for my SPH-l900 I can either buy a hardware / software combo to repair my phone, throw my phone away, or risk taking it to a sprint store.
Also what device would I use to repair my phone? JTAG / RIFFTag? or ???
And also no one can make a PIT file for the SPH-L900 (16GB) ?
I have
Just odin back to a stock rooted LJC rom and it will automagically repartition your phone back the way it needs to be.
Sent from my note 2 ya bish!
d12unk13astard said:
Just odin back to a stock rooted LJC rom and it will automagically repartition your phone back the way it needs to be.
Sent from my note 2 ya bish!
Click to expand...
Click to collapse
Last I researched and tried you cannot just Odin back without a .PIT configuration file with a corrupted ROM (EMMC). Does anyone have a .PIT configuration file for the SPH-L900?
Can you get into odin download mode by holding volume down and power? If so im 99.9% sure its an easy fix. Or you can try your luck finding a .pit configuration...
Sent from my note 2 ya bish!
d12unk13astard said:
Can you get into odin download mode by holding volume down and power? If so im 99.9% sure its an easy fix. Or you can try your luck finding a .pit configuration...
Sent from my note 2 ya bish!
Click to expand...
Click to collapse
I have the PIT file somewhere.... just need to find it.
*Edit* Attached. Use this and MC2 and you should be all set.
garwynn said:
I have the PIT file somewhere.... just need to find it.
*Edit* Attached. Use this and MC2 and you should be all set.
Click to expand...
Click to collapse
Thank you so much, I was hesitant to PM you directly and thought someone else might have the proper .PIT file...
Did you just create it yourself using Pit Magic or how did you get that .PIT configuration? If you don't mind me asking.
d12unk13astard said:
Can you get into odin download mode by holding volume down and power? If so im 99.9% sure its an easy fix. Or you can try your luck finding a .pit configuration...
Sent from my note 2 ya bish!
Click to expand...
Click to collapse
I was looking for a .PIT configuration file because my ROM (EMMC) was corrupted, from my experience Odin only works with regular Custom OS .tar installs if you only have a working ROM (EMMC). I had to repartition my phone first... And I did look lol, I couldn't find a working .PIT file for my phone sadly and on top of that I tried to create my own but failed it hard. I guess it was a great learning experience because sprint looked at my phone and just said that they would replace my old one, and since I've had it for about a year they just let me keep the old one
Guy_with_an_Axe said:
Thank you so much, I was hesitant to PM you directly and thought someone else might have the proper .PIT file...
Did you just create it yourself using Pit Magic or how did you get that .PIT configuration? If you don't mind me asking.
I was looking for a .PIT configuration file because my ROM (EMMC) was corrupted, from my experience Odin only works with regular Custom OS .tar installs if you only have a working ROM (EMMC). I had to repartition my phone first... And I did look lol, I couldn't find a working .PIT file for my phone sadly and on top of that I tried to create my own but failed it hard. I guess it was a great learning experience because sprint looked at my phone and just said that they would replace my old one, and since I've had it for about a year they just let me keep the old one
Click to expand...
Click to collapse
This one I got from a Heimdall pull.
Sent from my SPH-L900 using Tapatalk
garwynn said:
This one I got from a Heimdall pull.
Sent from my SPH-L900 using Tapatalk
Click to expand...
Click to collapse
Thanks again, I think I'll do that from now on lol
garwynn said:
I have the PIT file somewhere.... just need to find it.
*Edit* Attached. Use this and MC2 and you should be all set.
Click to expand...
Click to collapse
So if I have MC2 firmware and use your MC2 pit file this repartition the phone and restore firmware. so what do i click on in odin too run both files. Thanks
tommyjoesanders said:
So if I have MC2 firmware and use your MC2 pit file this repartition the phone and restore firmware. so what do i click on in odin too run both files. Thanks
Click to expand...
Click to collapse
Pit goes in pit slot, tar in pda.
Sent from my LG-LS980 using Tapatalk
garwynn said:
Pit goes in pit slot, tar in pda.
I have same problem and tried to do things as your guy have shown: get the t0lte.zip and MC2 but the pit re-partition is failed after all just seconds after hit the start. Tried to do with several USBs but no help.
What should I do next? I can get my phone into ODIN download mode but could not flash the any stock ROM. I got the message :There is no PIT partition and if I attach file t0tle.pit and check the re-partition box then I got the message second after hit the start button : Re-Partition operation failed.
Click to expand...
Click to collapse
abbuyacc said:
garwynn said:
Pit goes in pit slot, tar in pda.
I have same problem and tried to do things as your guy have shown: get the t0lte.zip and MC2 but the pit re-partition is failed after all just seconds after hit the start. Tried to do with several USBs but no help.
What should I do next? I can get my phone into ODIN download mode but could not flash the any stock ROM. I got the message :There is no PIT partition and if I attach file t0tle.pit and check the re-partition box then I got the message second after hit the start button : Re-Partition operation failed.
Click to expand...
Click to collapse
You should not need to repartition. I don't believe they changed to go to 4.3. What happens if you do just the tarball?
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
garwynn said:
abbuyacc said:
You should not need to repartition. I don't believe they changed to go to 4.3. What happens if you do just the tarball?
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
Could not do anything, and sorry what do you meant when saying "do just the tarball"?
Click to expand...
Click to collapse
abbuyacc said:
Could not do anything, and sorry what do you meant when saying "do just the tarball"?
Click to expand...
Click to collapse
My meaning is try flashing the tar file only. Don't add the pit file or check repartition.
Sent from my LG-LS980 using Tapatalk
garwynn said:
My meaning is try flashing the tar file only. Don't add the pit file or check repartition.
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
OH, OK... if so then I got the message something like there is no pit file. The phone if I don't do anything but just hit the power button it will come to a blank screen with nothing in it and you cannot control anything even power button and you will need to take the battery out in order to turn the phone off but I also mentioned that I can get into the Odin download mode and when you do the tarball (your term) you will get the message that said no pit file.
Did this end up working out for you? I've downloaded MC2 (4.1.2?) and another version (4.4 I think) and everything I try keeps telling me I need a PIT file. My phone is soft bricked where it'll go into download mode, but trying to go into recovery or booting it normally and it'll turn into a Poltergeist screeen and won't do anything - http://forum.xda-developers.com/note-2-sprint/help/odd-semi-brick-t3082102
garwynn said:
I have the PIT file somewhere.... just need to find it.
*Edit* Attached. Use this and MC2 and you should be all set.
Click to expand...
Click to collapse
I've tried literally everything possible....Cannot get anything to flash in Odin or Philz Recovery....Is there any other way to try to reset internal memory?
New logic board and now the phone is good as new, thanks eBay
kchannel9 said:
New logic board and now the phone is good as new, thanks
I am in the same boat.
Woke up this morning and phone is on "Galaxy Note 2" screen. Does not even get past the Sprint and Samsung boot anims. Try to boot into TWRP to send some commands and disable Xposed, I did some playing with Xposed last night but when I went to sleep, I had done multiple restarts and tests w/ Xposed modules and all was sound. Put it on the charger and slept. Until this morning!
Not able to send and ADB commands to phone during boot.
I can get into dl mode with Odin but so far the recovery files I've tried to flashed have returned either FAILED or NO PIT PARTITION error.
Kchannel9.. so you got a new motherboard. Were you ever able to recover any of your data off your old motherboard?
Click to expand...
Click to collapse
Nope.
I have been looking all over xda as well as searching Google. I need the PIT file for the SGH-T889 I clicked nand erase all inside of oden and I now have no imei no phone use, no sim reading, and my sd card is non existant when I get a rom to load. I am also having a problem with kies it wont let me go to a factory rom and fix the nand.
So main question does anyone have the SGH-T889 tmobile note 2 pit file
I already have seen the t889v which is canadian and does not work for me
or does someone no how I can fix my phone going step by step from when I erase everything?
Stephen009 said:
I have been looking all over xda as well as searching Google. I need the PIT file for the SGH-T889 I clicked nand erase all inside of oden and I now have no imei no phone use, no sim reading, and my sd card is non existant when I get a rom to load. I am also having a problem with kies it wont let me go to a factory rom and fix the nand.
So main question does anyone have the SGH-T889 tmobile note 2 pit file
I already have seen the t889v which is canadian and does not work for me
or does someone no how I can fix my phone going step by step from when I erase everything?
Click to expand...
Click to collapse
I got this following help from Ciphercodes when I needed a PIT file, just yesterday. I haven't tried it yet, but he was a great help to me. Here is his post from my question:
Here is the PIT file I had posted when my phone was still on 4.1.2.
Link: http://forum.xda-developers.com/show...&postcount=205
Download the attached file and make sure to change file extension from .txt to .pit.
Start ODIN, click PIT and browse to this pit file.
Make sure the Re-Partition box is checked.
Then under PDA load your T889UVBMD1 tar.md5 file and click start.
I sure hope this helps you.
hodgestl said:
I got this following help from Ciphercodes when I needed a PIT file, just yesterday. I haven't tried it yet, but he was a great help to me. Here is his post from my question:
Here is the PIT file I had posted when my phone was still on 4.1.2.
Link: http://forum.xda-developers.com/show...&postcount=205
Download the attached file and make sure to change file extension from .txt to .pit.
Start ODIN, click PIT and browse to this pit file.
Make sure the Re-Partition box is checked.
Then under PDA load your T889UVBMD1 tar.md5 file and click start.
I sure hope this helps you.
Click to expand...
Click to collapse
link no longer works...... can anybody provide the pit file for me?
Can someone please upload the pit file for this phone???
biglo said:
Can someone please upload the pit file for this phone???
Click to expand...
Click to collapse
Here you go...
http://forum.xda-developers.com/showthread.php?p=48398405
If you scroll down you will see another pit file in the same forum.
Sent from my SM-N910T using XDA Free mobile app
ciphercodes said:
Here you go...
http://forum.xda-developers.com/showthread.php?p=48398405
If you scroll down you will see another pit file in the same forum.
Sent from my SM-N910T using XDA Free mobile app
Click to expand...
Click to collapse
Thanks a lot.