I have flashed [SAMSUNG] PSSR - ver.2B1 -10.06.2013 custom ROM on my HTC One V(PrimoU) and i am using HELLBOY-CM10-201305202359 kernel. After booting, when I select Language and click next, Setup Wizard crashes and restarts. All i can do is pull notification bar down and use toggles. I cant open launcher or any other app. Please Help
try it again and again until it works.. it happen to me also
Sent from my One V using xda premium
panha510 said:
try it again and again until it works.. it happen to me also
Sent from my One V using xda premium
Click to expand...
Click to collapse
Already attempted so many times, before I flashed Hellboy kernel it stopped at samsung boot animation
Atleast now the ROM boots up
Anveshak said:
Already attempted so many times, before I flashed Hellboy kernel it stopped at samsung boot animation
Atleast now the ROM boots up
Click to expand...
Click to collapse
may be a bad download try to download it again
gulsher said:
may be a bad download try to download it again
Click to expand...
Click to collapse
No, the download is alright. Still thanks
Tried wiping cache/dalvik cache system factory reset
Sent from my One V using xda app-developers app
Nishblueweapon said:
Tried wiping cache/dalvik cache system factory reset
Sent from my One V using xda app-developers app
Click to expand...
Click to collapse
Tried that too but It didnt work, now i am using Shpongle Rom and its working fine. Thanks:laugh:
Related
i restarted my phone and its stuck on bootloop, what do i do?
Try reflashing the ROM without wiping. BTW, for better help, honestly, you need to explain a lot more than the 3-4 words you have posted.
Actually i got the same prob. I disconnected from usb without pressing turn off (i use cyanogen 7.0.3 stable). After doing so, adw launcher didnt seem to respond so i decided to reboot. After that, i got boot loop on reboot. Flashing the rom again seems to solve the problem, but only until next reboot. Any suggestions?
Sent from my HTC Wildfire using XDA App
The same type of question,2-3 sentance, no spec of phone. Dude post your spec.
Else try a clean install, formatting boot,system,cache,dalivc cache,user data, ext , etc.
Sent from my HTC Wildfire using XDA App
Bootloop on 'splashics'
hi
I tried to install splash ics onto my phone and it kept on repeating the bootanimation.
so i used adb logcat and i saw that it was bootlooping.
please help me actually boot into the rom
thanks
Try a permission fix after wiping cache and dalvic cache from cwm
Sent from my HTC HD2 using xda premium
Thanks :-0
showlyshah said:
Try a permission fix after wiping cache and dalvic cache from cwm
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
thanks for that, i will give it a go tommorow. hopefully it will work this time.
showlyshah said:
Try a permission fix after wiping cache and dalvic cache from cwm
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
Do I perform the permission fix after I install the rom
Sent from my HTC Wildfire using XDA App
Nop,not necessarily. Cos some will do it as default. But some wont. But it will do no harm if u do, other than consuming 2-5 minutes .
Sent from my HTC HD2 using xda premium
showlyshah said:
Nop,not necessarily. Cos some will do it as default. But some wont. But it will do no harm if u do, other than consuming 2-5 minutes .
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
Ok, just wanted to be sure I'll post again if the Rom still bootloops, thanks again for your help
Sent from my HTC Wildfire using XDA App
radders1997 said:
Ok, just wanted to be sure I'll post again if the Rom still bootloops, thanks again for your help
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
I still can't boot into the Rom still bootloops, I am not sure that the permission fix did anything.
Sent from my HTC Wildfire using XDA App
Ok , then the option remaining is restore from backup. If u have the backup of current rom, go to advanced backup in cwm and do system resrore only. And check if it works. If it wont, do full wipe and do a complete restore. No more optns.:-(
Sent from my HTC HD2 using xda premium
Oh Wel
showlyshah said:
Ok , then the option remaining is restore from backup. If u have the backup of current rom, go to advanced backup in cwm and do system resrore only. And check if it works. If it wont, do full wipe and do a complete restore. No more optns.:-(
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
i dont have a backup, unfortunantly, looks like i will have to wait until future releases of splash ics then to see if the problem is with other wildfires trying to run that ROM or if it is just mine :-(
Should i redownload the rom to see if that works for me?
Tried wiping data/cache/dalvik cache/system/data-factory reset, and then reflash? 1st boot always takes more time btw.
Sent from my HTC Wildfire using Tapatalk
I used CWMR and installed this ROM: http://forum.xda-developers.com/showthread.php?t=1778190
When I power it on, it stays on a Boot Animation screen (a colorful X that glows) for an indefinite amount of time. I left it there for around an hour before giving up and restoring to my backup (rooted) Gingerbread.
Anyone know what might be my problem? Thanks.
P.S: I searched the thread, I couldn't find a solution to my problem.
Install TWRP recovery ... wipe everything and rewipe dalvik and cache before reboot
Sent from my ADR6300 using xda app-developers app
zachf714 said:
Install TWRP recovery ... wipe everything and rewipe dalvik and cache before reboot
Sent from my ADR6300 using xda app-developers app
Click to expand...
Click to collapse
I don't see the HTC Droid incredible on the supported device list?
Atunzuman said:
I don't see the HTC Droid incredible on the supported device list?
Click to expand...
Click to collapse
Install it from goo manager I have it fro. There on my Dinc... hit menu.. install open script recovery
Sent from my ADR6300 using xda app-developers app
zachf714 said:
Install it from goo manager I have it fro. There on my Dinc... hit menu.. install open script recovery
Sent from my ADR6300 using xda app-developers app
Click to expand...
Click to collapse
Never mind I fixed my problem, thanks for replies though.
/thread.
Atunzuman said:
Never mind I fixed my problem, thanks for replies though.
/thread.
Click to expand...
Click to collapse
For future people who may encounter this problem, it's always nice to say what you actually did to fix it.
Zimeron said:
For future people who may encounter this problem, it's always nice to say what you actually did to fix it.
Click to expand...
Click to collapse
I tried installing it again, this time wiping data, cache, and d.cache.
I think I missed data the first time.
zachf714 said:
Install TWRP recovery ... wipe everything and rewipe dalvik and cache before reboot
Sent from my ADR6300 using xda app-developers app
Click to expand...
Click to collapse
I have HTC ONE X. I am trying to flash pacman 4.3 build/4.4 alpha ROM. But everytym i flash these ROM I stuck at pacman logo screen. Though i had gone through standard procedure of flashing lyk wiping cache and dalvik. Dont know what's the problem is plzz help. I have HBOOT 1.72, TWRP 2.7.0.
abhinav625 said:
I have HTC ONE X. I am trying to flash pacman 4.3 build/4.4 alpha ROM. But everytym i flash these ROM I stuck at pacman logo screen. Though i had gone through standard procedure of flashing lyk wiping cache and dalvik. Dont know what's the problem is plzz help. I have HBOOT 1.72, TWRP 2.7.0.
Click to expand...
Click to collapse
Use your devices forums. This is droid incredible not One X
Sent from my d2lte using Tapatalk
I have an HTC one v CDMA (Virgin Mobile(PrimoC)), and i tried to install AOKP, but when it booted it never got past the "Initiating Swagger" boot screen.
I followed all the instructions, using TWRP to wipe the dalvik, cache, and system, and then install the zip and gapps.
I'm using the build "aokp_primoc_unofficial_Nov-18-12.zip", the gapps "gapps-jb-20121011-signed.zip", and the boot.img that came in the zip.
Does anyone know why this is happening and how to fix it?
Thanks.
download titanium kiss USB kernel or hellboy kernel and flash that one.
kernel from CM10 wrx flawlessly.
Sent from my One V
mihirengg19 said:
download titanium kiss USB kernel or hellboy kernel and flash that one.
kernel from CM10 wrx flawlessly.
Sent from my One V
Click to expand...
Click to collapse
Aren't those only for PrimoU?
I'm PrimoC.
Use kernel from primoc CM10 rom.
Sent from my One V
tell me how u flashed the kernel !?
cybervibin said:
tell me how u flashed the kernel !?
Click to expand...
Click to collapse
I held the volume down button as it booted, and when the menu came up I hit fastboot.
Then I typed into cmd from there:
Code:
fastboot flash boot boot.img
and it said it was successful.
AND
mihirengg19 said:
Use kernel from primoc CM10 rom.
Sent from my One V
Click to expand...
Click to collapse
Tried.
Didn't work.
Same problem, stuck on "Initiating Swagger" screen.
You didn't do a full wipe
Sent from my HTC One V using xda premium
donhashem.dh said:
You didn't do a full wipe
Sent from my HTC One V using xda premium
Click to expand...
Click to collapse
I'm pretty sure I did.
I went into recovery (TWRP), went to wipe, and hit dalvik, then cache, then system (I didn't hit factory reset)
Is there something I missed?
Sent from my HTC One V using xda app-developers app
Yeah,you left the important one,factory reset...if you don't the phone won't boot mate
Sent from my HTC One V using xda premium
@don: it will boot but there will b million FCs and many other probs.
now do this--->
1. download rom and gapps,transfer them to root of SD card.
2. place boot.img in fastboot folder.
3. go into bootloader, FIRST flash the boot.img in fastboot(does the screen say FASTBOOT USB when u connect the phone to the PC?)
4. go into recovery, then FULL WIPE-factory reset, erase cache and dalvik cache.
5. then flash the ROM.
6. boot into the rom.then again enter into recovery and then flash gapps.
do the above steps in the same order all over again....
I tried to factory reset from TWRP and it said:
Factory Reset Complete
Failed​Why is it doing that?
I need to factory reset!
agentms11 said:
I tried to factory reset from TWRP and it said:
Factory Reset Complete
Failed​Why is it doing that?
I need to factory reset!
Click to expand...
Click to collapse
It just fails to wipe your sd card is all.
Sent from my One V using Tapatalk 2
simply flash CWM and then do the steps i mentioned above.
Did my thread help
Sent from my One V using xda premium
I got it running! :victory:
Thank you very much all those who helped.
Your help was greatly appreciated.
One more question: Will I need to flash a different kernel if I want to use, say, CM10, or PACman, or Paranoid Android?
(I used the kernel that came in the AOKP zip)
agentms11 said:
I got it running! :victory:
Thank you very much all those who helped.
Your help was greatly appreciated.
One more question: Will I need to flash a different kernel if I want to use, say, CM10, or PACman, or Paranoid Android?
Click to expand...
Click to collapse
the kernel from CM10 works with all JB..
which kernel did u finally flash?
mihirengg19 said:
the kernel from CM10 works with all JB..
which kernel did u finally flash?
Click to expand...
Click to collapse
I flashed the one that came in the AOKP zip.
Are CM10, PACman, and Paranoid Android JB?
yes.
what is ur kernel? go to settings>about phone.
mihirengg19 said:
yes.
what is ur kernel? go to settings>about phone.
Click to expand...
Click to collapse
3.0.46 JmzPrimoC+.
Will that work for those?
Sent from my Full Android on PrimoC using xda app-developers app
Yep .....good good ...happy to help
Sent from my One V using xda premium
Ok, i'm not a noob (at least i don't think so),
I've flashed every which rom before to play with, no problems ever.
Currently i'm on CM10 Nightly, with stock CM10 kernel and last ATT Modem (JB)
Wanted to go and try out the TW official release but need to stay rooted for TB.
I got CWM - cleared cache, cleared data, cleared davlik, formated /system /data /cache /sdcard
Went to download mode, kicked off ODIN
phone reboots and gets stuck at Samsung glowing loader
Tried above with TeamWin recovery - same thing
Tried to dirty flash over CM10 - same thing.
Tried to flash cache/davlik/ etcc with CM10 installed and flash with Odin, same thing.
Tried even all above steps with stock / unrooted JB rom, same thing.
Re-downloaded both stock and rooted roms and tried all of the above steps, same thing.
I can Nandroid back to CM10 no problem and it loads with no issues....
I'm about to give up on TW but just wanted to see if anyone has any ideas what am i missing?
Try reinstalling the samsung usb drivers. Seems like something went wrong while flashing from ODIN...
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
---------- Post added at 10:14 AM ---------- Previous post was at 10:09 AM ----------
Could also be an issue with the ROM file itself...where did you download it?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
After flashing the rom you need to do a factory reset in recovery
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Whenever it gets stuck, hold down the power button, up volume, and home key... Once shut off let go do the same, when you feel it vibrate, let off the power button and hold up and home key. It should reboot into recovery and you can do a factory reset to wipe your data. wipe Data/factory rest and wipe cache, then reboot. Mine booted right up. :good:
Someone else's post that I saved for myself on note pad for when it happens to me so I don't forget
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
jerrycoffman45 said:
After flashing the rom you need to do a factory reset in recovery
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
+1
Sent from my SGH-I747 using xda premium
mar5hal said:
+1
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
I did the reset /wipe after odin load, same thing, stops at Samsung
gravedigger76 said:
I did the reset /wipe after odin load, same thing, stops at Samsung
Click to expand...
Click to collapse
how long are you giving it to boot after a factory reset it can take up to 10 min
you cam also try this
http://forum.xda-developers.com/showthread.php?t=2031840
Really?10 min? I was not that patient. I'll give it another shot
Sent from my SAMSUNG-SGH-I747 using xda premium
let us know how it goes
jerrycoffman45 said:
how long are you giving it to boot after a factory reset it can take up to 10 min
you cam also try this
http://forum.xda-developers.com/showthread.php?t=2031840
Click to expand...
Click to collapse
jerrycoffman45 said:
After flashing the rom you need to do a factory reset in recovery
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
second this...it can take a while
mar5hal said:
+1
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
illmatic24 said:
second this...it can take a while
Click to expand...
Click to collapse
Not working for me.
I'm stuck at Samsung Logo.
Tried to do the factory reset in stock recovery that's loaded after ROM install with Odin, no go.
Installed CWM recovery and tried to do reset / wipe cache/ wiped davlik/ no go
Tried to re-download ROM and tried again, no go.
Tried to load TeamWin recovery and do the same thing no go.
Still stuck at Samsung logo -
Waited good 15 20 min and still stuck
sorry i am at a loss
Try downloading a different version of tw stock rom.
It could most likely be because the original one you downloaded in corrupted or a incomplete file.
Sent from my SGH-I747M using xda app-developers app
Where can I get stock recovery for the JB Ron separate from rom itself that I can 're flash?
Sent from my SAMSUNG-SGH-I747 using xda premium
gravedigger76 said:
Where can I get stock recovery for the JB Ron separate from rom itself that I can 're flash?
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
here is the stock recovery
http://forum.xda-developers.com/showthread.php?t=2026751
sent from the dark side of the universe....
Well for one I find it a bit odd after I wipe dalvik data and cache when I go to install the Rom after I click install it says instantly install successful so I was like ok maybe that's normal but when I boot up I'm still on stock what's a fix for this?
Sent from my LG-E980 using xda app-developers app
Class_of_punk26 said:
Well for one I find it a bit odd after I wipe dalvik data and cache when I go to install the Rom after I click install it says instantly install successful so I was like ok maybe that's normal but when I boot up I'm still on stock what's a fix for this?
Sent from my LG-E980 using xda app-developers app
Click to expand...
Click to collapse
What ROM you want to flash
What Recovery you have installed
.............
Sent from my LG-E980 using Tapatalk
I solved it earlier I forgot to reply back to tel everyone know but I was using twrp I switched to cwm it worked like a charm lol
Sent from my LG-E988 using xda app-developers app