Develop Bugs

TV out

I did a search and didn't see anything about this, so I'll post my question.
Has anyone gotten this to work? I plugged in my a/v cable (3.5mm to RCA) into the adapter that came with the TP2, and it into the TP2 usb port, then connected the RCA ends to my TV and when I tried to start the TV out under settings, it said I needed the TV Out cable.
I couldn't find anything in the provided documentation about this (surprise). I don't have the HTC cable, nor do I have the iphone/ipod cable, but I can't believe that this one would be any different from the icrap one, it's a freaking standard.
Any one?

The video out is actually the usb port. You need to buy a cable that is usb to composite

If your cable is iPod compatible, you should be able to install this get TV Out to work.

this is what i bought and it works great with my sprint tp2 http://www.expansys-usa.com/d.aspx?i=179148

I dont understand what you mean by iPod compatible?
Dont I need HTC's special USB video cable? Does anybody have a wireing schematic on that so I can make one? I have a million 3.5mm to rca cables lying around but that wont work...

MustangChris04 said:
I dont understand what you mean by iPod compatible?
Dont I need HTC's special USB video cable? Does anybody have a wireing schematic on that so I can make one? I have a million 3.5mm to rca cables lying around but that wont work...
Click to expand...
Click to collapse
From my understanding (my tilt2 hasn't come yet, so I can't confirm) you should have an adapter that comes with your device that converts the ext-USB into a 3.5 mm headphone jack. You can plug an HTC 3.5mm to RCA cable in that jack, or put an iPod compatible RCA cable (uses the same pinouts as HTC's cable and is essentially identical, but cheaper) and change HKLM\Software\HTC\H2W\TVOutCableIn to "1" in the registry in order to get it working. The software I linked to should do this automatically, so you don't have to do that each time. However, I don't know if this works on the TP2 since I don't have mine yet.

My touch pro 2 didnt come with that. I actually have a usb jack, and a 3.5mm headphone jack on the bottom. It is the Verizon version.

Ok, I followed the instructions on this video: http://www.youtube.com/watch?v=2CLPjcImHAg&feature=fvw
I did both reg hack changing 0 to 1, as well as trying the icon under settings. The reg hack did bring up the screen, but nothing was outputted to the TV. I can't believe my 3.5mm -> RCA cable is any different than an "ipod compatible" one, it has the 4 bands on the 3.5mm jack and 3 RCAs for audio (l/r) and video. Is there something I'm missing? I don't want to buy the HTC usb/rca cable, and would be pretty upset if I got it and it still didn't work.

i tried it with my camcorder cable and the extusb adapter supplied with my phone. no luck. my camcorder cable only has 3 bands. does this make a difference? i have literally hundreds of cables. i'll have to search and try out a few others. or i'll just buy the official one on ebay if necessary.

I attempted this tonite. Did not work.
Sprint TP2
Apple iBook AV cable - 3.5mm -> 3way RCA yel, red, white
HTC EXTusb adapter.
tried 2 different cabs (enabletvout.cab and nuetvout-102-v1) as well as just changing the reg value to 1.
tried changing around the rca cables to the video input on tv..
I was able to get the tv out options to display on the phone, but NOTHING ever went out to the TV.
I hear people are having success with the oficial HTC tp2 tv out cable, which is a miniUSB -> 3 way rca.
Any success using the 3.5mm jack on a sprint tp2 ?

I had some luck with a cable I had but found that I needed to use the Red RCA as my video and the Yellow and White as audio.

JudgeDredd67 said:
I had some luck with a cable I had but found that I needed to use the Red RCA as my video and the Yellow and White as audio.
Click to expand...
Click to collapse
i was all excited but that didnt work for me.

I had to purchase the extusb to av jack like this one.
AV Cable Works great.
You don't need to install the TV out cab. It will auto pop up when the cable is inserted. Most roms have this built in. The Tilt 2 stock rom does.

I used the original HTC OEM multi adapter with my 3.5mm RCA cable after prying it open and cutting the blue cable, which enables Tv out on my Tilt 2, but disables headphone use which is why im putting a switch in there.

well, I purchased the USB to video output cable and it workd fine.. HOWEVER only certain program work.. for instance, I wanted to see if I could watch sprint TV using the TV out and it tells me it can not run wth tv out. is there any way to do this??

Do a search on PPCGeeks.com forums for "How did you get the tv out/video out to work on the touch pro 2." I had to remove/cut the blue wire from the multi-adapter which came w/ my TP2. Hook up a standard 3.5mm jack to composite cable that came with my camcorder. Then I was able to get audio and video working on my 47" TV. No other software was required. The only thing is, you have to swap the yellow cable with the red. Red now provides the video signal. Otherwise, everything else works great.
Credit goes to the original poster in PPCGeeks.com. I would have provided a link to the instructions, but since I'm still new on this site, my posting privileges are still limited. Good luck everyone. I hope this was the answer you were looking for.

What are we all talking about? on my TP2 (SPRINT) I bought a cable for video and audio output that has USB on one end and RCA plugs on the other end. I just plug it into the USB port of the TP2 and hook up the RCA to my TV. It also has a port for plugging in the charger while the video out cable is plugged it...

dahauss said:
What are we all talking about? on my TP2 (SPRINT) I bought a cable for video and audio output that has USB on one end and RCA plugs on the other end. I just plug it into the USB port of the TP2 and hook up the RCA to my TV. It also has a port for plugging in the charger while the video out cable is plugged it...
Click to expand...
Click to collapse
This is another option for those who do not wish to purchase the $20 - $25 USB to composite cables for the video outputs. Most of us received the USB multi-port device with our TP2. But by just cutting the blue wire from that device, you can have video output with a standard 3.5mm to composite cable (Red, white, yellow). Some of us may have this cable lying around the house. It usually comes with camcorders. If not, many places sell these standard cables for about $2 to $5. It's just information for those who wish to spend as little money as possible. That's all. Good luck.

All the video cables I find have the regular mini usb data cable port and not the different HTC mini usb port. Are there video cables with the HTC usb port?
To clarify, the part that plugs into the phone is the HTC plug, but the plug for the charger midway down the cable is the plug I'm referring to. Where can I find one with the HTC usb plug instead of the mini usb?

Mossesman said:
This is another option for those who do not wish to purchase the $20 - $25 USB to composite cables for the video outputs. Most of us received the USB multi-port device with our TP2. But by just cutting the blue wire from that device, you can have video output with a standard 3.5mm to composite cable (Red, white, yellow). Some of us may have this cable lying around the house. It usually comes with camcorders. If not, many places sell these standard cables for about $2 to $5. It's just information for those who wish to spend as little money as possible. That's all. Good luck.
Click to expand...
Click to collapse
I cannot find a USB to composite cable anywhere on the net. I don't think that it would even work with the TP2 video out capabilities.

[Q] Captivate Glide Reboot when Plugging in MHL Adapter

Running SGH-I927RUXKJ5_STOCK_ROOTED. Phone reboots when plugging in a Micro USB to HDMI MHL Adapter. Upon reboot phone operates normally but no display on the external monitor. Anybody have MHL adapter working on Captivate Glide? Thanks for any help.

I ordered mine on ebay.
Phone doesn't reboot when connecting MHL cable.
But no video output to HDMI ...
I'm running Rogers ROM + Cranium kernel.
Edit :
it works !
You just need to connect the adapter to the power supply.
Just tested it with a HDMI videoprojector.
Powerpoint presentation displayed full screen.
Video file as well.
No lag at all.
Didn't check if audio was routed through HDMI (the videoprojector I used doesn't support it).

frav said:
Didn't check if audio was routed through HDMI (the videoprojector I used doesn't support it).
Click to expand...
Click to collapse
I can confirm that audio works. Anything you can see or hear on the phone goes to the TV.

I get video but no audio but that might be because of my audio setup.

I have tried it as well with a MHL adapter I bought at Monoprice and you do get audio. I have noticed sometimes it does not work though when I plug it in. I do not know why. I am wondering if the MHL adapter I bought is flaky or if Our phone is sometimes picky.

i checked the connection, video and sound work great.
No connection loss.
Connection works everytime I connect the cable.
Sent from my SAMSUNG-SGH-I927R using XDA

Have you any issues with the length of your HDMI cable I found 3 feet works but 10 feet does not did not try a 6 foot as did not have 1 at the time. I think it can not be to long as it needs power from the micro USB and too long may not have enough power. Just curious on the length of your HDMI?

dudejb said:
Have you any issues with the length of your HDMI cable I found 3 feet works but 10 feet does not did not try a 6 foot as did not have 1 at the time. I think it can not be to long as it needs power from the micro USB and too long may not have enough power. Just curious on the length of your HDMI?
Click to expand...
Click to collapse
The cable I used was 6 feet long.
It worked great. It had no impact on video quality or sound quality.

paganinia said:
Running SGH-I927RUXKJ5_STOCK_ROOTED. Phone reboots when plugging in a Micro USB to HDMI MHL Adapter. Upon reboot phone operates normally but no display on the external monitor. Anybody have MHL adapter working on Captivate Glide? Thanks for any help.
Click to expand...
Click to collapse
know where i can find the rom for SGH-I927UCLG9 that has hdmi compatibility?

trevordale said:
know where i can find the rom for SGH-I927UCLG9 that has hdmi compatibility?
Click to expand...
Click to collapse
Are you asking where to download SGH-I927UCLG9, or are you asking whether SGH-I927UCLG9 is compatible with hdmi, or what are you asking?

What makes it work?
Is the MHL functionality connected to the ROM you use, or the device? or both? I have a kitkat rom and was hoping that would make it work, but it doesn't, and didn't with the official Ice Cream Sandwich version either.

I don't have an MHL adapter, but I'd try cleaning the USB connector on the phone. The reason I say this is that my i927 would sometimes have trouble connecting to the PC by USB and often, when receiving a phone call, it'd switch to car mode, as if I had a car accessory connected.
I cleaned the connector on my phone by rubbing the contacts first with an x-acto blade, then with a piece of paper with WD40 backed by the blade and finally with another piece of paper with ethyl alcohol. Don't forget to remove the battery before trying this and be very gentle to avoid breaking the connector.

working HDMI cable for acer A100. but no settings.

this one. works great.(
0.5FT 34AWG High Speed w/ Ethernet Micro-HDMI Male (Type D) to HDMI Female (Type A) Adapter Cable at amazon. (can't do links yet but search 34AWG and you will find it)
two issues though.
1. there are no resolution, etc. settings like on my HDMI laptop.
2. both TV's I have tried are cut off around the edges which sucks cause you can barely see the bottom bar.

the micro hdmi cord from the moto atrix works great with the a100, no cut off edges like you were stating.

thanks. I still have not tried it on a 1080p TV so ttyhe verdict is still out. also the cut off thing is not a huge deal since I just use it to watch video.

This is what I use. It works and cheaper.
http://www.amazon.com/gp/product/B003UH0Z9Q/ref=oh_o01_s00_i00_details

Here is the one I use, 6 foot:
http://www.monoprice.com/products/p...=10253&cs_id=1025301&p_id=6974&seq=1&format=2
But this is the one I am saving up for.
http://www.bestbuy.com/site/AudioQu...2?id=1218324437192&skuId=2383276#BVRRWidgetID

i have a simple micro hdmi cable and works fine

jackheart said:
this one. works great.(
0.5FT 34AWG High Speed w/ Ethernet Micro-HDMI Male (Type D) to HDMI Female (Type A) Adapter Cable at amazon. (can't do links yet but search 34AWG and you will find it)
two issues though.
1. there are no resolution, etc. settings like on my HDMI laptop.
2. both TV's I have tried are cut off around the edges which sucks cause you can barely see the bottom bar.
Click to expand...
Click to collapse
When connecting the device to the tv the bottom bar does not appear on the tv. Its not cut off its just how android displays it on the tv.
Sent from my Desire HD using xda premium

I think the problem isn't with the cable it is with the tv's. I have a LED tv and an LCD and at the LCD i don't have the cut edges on the bottom, but on the LED i get them. I also have a problem when watching movies online, flash player doesn't display my subs when i connect my tab on the tv's. I guess it's odd. I also have another problem with my cable. When i insert it in the tablet and just move the cable a little it looses the connection. I don't know if the cable has bad wirings or if it is from the micro-hdmi slot on my A100. Any suggestions?

dharr18 said:
...
But this is the one I am saving up for.
http://www.bestbuy.com/site/AudioQu...2?id=1218324437192&skuId=2383276#BVRRWidgetID
Click to expand...
Click to collapse
I was thinking it's a ripoff, but now I think it's impossible not to take advantage of this deal.... FREE SHIPPING? how can you pass that up?

Getting MHL/HDMI video out to work

I have both a genuine Samsung MHL adapter and the S2 mhl adapter with the 5pin to 11pin converter and I've seen both of these work on other phones.
However, I can't get my video out working on my S3. Both of them connect and bring up active charge and indicate onscreen that "HDMI cable connected". So I know the adapter and cable is being detected but no signal on HDTV. The HDMI cable is good as is TV and monitor I tested on and of course proper input is selected.
Now as far as I remember as soon as it is plugged in the video should automatically show up on HDTV screen...correct? No TV out setting has to be turned on as in past Galaxy correct?
Fyi..I have multiple S3's but currently only have one on hand...its a 747m with KyanROM on it... so not stock..it is rooted and has KT747 9-18 kernel as well.
I have a feeling its the rom(and I could easily test this if I had other phones but don't for a while).
So if both MHL adapters are confirmed working and both the HDMI cable and TV are working AND even the phone states that HDMI cable connected, then what is the issue with no video display?
Sent from my SGH-I747M using Tapatalk 2

pchemerys said:
I have both a genuine Samsung MHL adapter and the S2 mhl adapter with the 5pin to 11pin converter and I've seen both of these work on other phones.
However, I can't get my video out working on my S3. Both of them connect and bring up active charge and indicate onscreen that "HDMI cable connected". So I know the adapter and cable is being detected but no signal on HDTV. The HDMI cable is good as is TV and monitor I tested on and of course proper input is selected.
Now as far as I remember as soon as it is plugged in the video should automatically show up on HDTV screen...correct? No TV out setting has to be turned on as in past Galaxy correct?
Fyi..I have multiple S3's but currently only have one on hand...its a 747m with KyanROM on it... so not stock..it is rooted and has KT747 9-18 kernel as well.
I have a feeling its the rom(and I could easily test this if I had other phones but don't for a while).
So if both MHL adapters are confirmed working and both the HDMI cable and TV are working AND even the phone states that HDMI cable connected, then what is the issue with no video display?
Sent from my SGH-I747M using Tapatalk 2
Click to expand...
Click to collapse
Do you have the power plugged in? That is, a AC/DC charger to micro-USB cable plugged in to the micro-USB port on the adapter.

Should work automatically
I just received the Min-Suit 11-pin adapter sold on Amazon. Mine switches on automatically as soon as I plug in the adapter. Of course, to make it work, you should first plug a charging cable into the USB micro port on the adapter and you should connect an HDMI cable to the tv. Also, make sure you're selected the correct HDMI input on the tv. If you do all of that, the picture and sound should start up as soon as you plug in the cable.

Unless it was a mistake, your OP says you have s2 adapter. From my understanding, the pins are different on the s3 and will not work with the older adapters.

If you read closer Woody you will see that he says that he uses an old MHL adapter, WITH the 5 to 11 pin adapter
That should work. But I think your ROM is the guilty one...
Send from my GT-I9300 with Tapatalk

Jeurum_92 said:
If you read closer Woody you will see that he says that he uses an old MHL adapter, WITH the 5 to 11 pin adapter
That should work. But I think your ROM is the guilty one...
Send from my GT-I9300 with Tapatalk
Click to expand...
Click to collapse
Dont give up yet, I thought I had the same problem, but my ballistic case was preventing the MHL adapter from going all the way in. I took the phone out of the case and the adapter clicked in. Worked great on the TV, but best of all, worked in the truck via a down converter. Had to play with it to get in deep enough (kind of phone foreplay i guess:laugh to work, but it does.

Slimport connectivity issue

Hello XDA,
I have just purchased a HDMI slimport adapter to connect my nexus 5 to my LCD screen. But for some reason it is not showing anything. I wanted to know if the HDMI cable I am using is apt to connect the slimport to the TV set. This is the cable that I am using. I am also posting the link the slimport adapter that I purchased. Please help as soon as possible.
Thanks
HDMI cable
http://www.flipkart.com/ad-net-hdmi...e_accessory_datacable_1&ppid=ACCDS9XE3RQDEDHZ
Slimport adapter
http://m.shopclues.com/slimport-to-...5rSm7x4xXE7xM6ROpA9_dBoCQ_rw_wcB&gclsrc=aw.ds

rahul9five said:
Hello XDA,
I have just purchased a HDMI slimport adapter to connect my nexus 5 to my LCD screen. But for some reason it is not showing anything. I wanted to know if the HDMI cable I am using is apt to connect the slimport to the TV set. This is the cable that I am using. I am also posting the link the slimport adapter that I purchased. Please help as soon as possible.
Thanks
HDMI cable
http://www.flipkart.com/ad-net-hdmi...e_accessory_datacable_1&ppid=ACCDS9XE3RQDEDHZ
Slimport adapter
http://m.shopclues.com/slimport-to-...5rSm7x4xXE7xM6ROpA9_dBoCQ_rw_wcB&gclsrc=aw.ds
Click to expand...
Click to collapse
I had 2 slimport adapte, 1 was for a frind and they worked only 30 minutes the they started to freeze and give artifacts on screen and after 5 minutes completly black screen...The adapter box looks similar, now I want to buy a chromecast

I ended up buying Chromecast only. Returned that piece of plastic