Hi All,
I got my Note 2 today, and have run into a problem already
Mobile data (HSPA+) was working when I first got the phone and used it between the shop and the way home.
When I got home, I switched over to wifi to download things.
I then flashed CWM from the cwm-root-note2.tar.md5 file in Dr Ketan's guide using PC Odin.
Then, I flashed Omega v3 via CWM.
All went without a problem.
I was still on wifi and downloading and installing all of my apps.
After a while I turned off wifi and I noticed that I wasn't getting any mobile data connection. I was getting 3 or 4 bars of mobile signal, but no 3G, H or H+ symbol to indicate mobile data.
I messaged a nearby friend on the same carrier and he said his was working fine. So, I figured I must have messed up the mobile network settings,
I checked the APN settings and they were blank, so I put them back in manually.
Still no data connection,
I went into CWM and wiped cache, dalvik and user data.
Still no good.
I downloaded the stock XXALJ1 ROM for Thailand (where I am) and flashed that, did another 3 wipes, but still no luck.
I tried doing a factory reset from the settings menu. But still no joy.
I put the SIM card into my Note 1 and it got a H+ straight away and data was working fine.(when the shop cut it down, they made a nice neat job of it, so the excess makes a decent micro sim holder). So, the network and SIM card are OK.
I noticed that when I first got the phone, the boot screen said "N7100" under "Galaxy Note II".
Now, it doesn't. I'm not sure when it changed.
I also noticed that when I do the under/factory resets, there are still some settings that aren't reset, For example, I set it to WCDMA only to see if that helped and then when I did a factory reset, it was still set like that, rather than the default "auto" that it originally comes with.
Unfortunately I didn't do a nandroid backup, as my phone came with XXALIH (without the multiscreen), so I figured I'd updated to LJ1 first.
Does anyone have any suggestions of what I can do?
Is there a full wipe ROM, or a way to reflash the bootloader and ROM?
It's 3am now, so I need to go to sleep, but this is annoying the hell out of me.
Thanks,
Rich
Carrier please?
wonsanim said:
Carrier please?
Click to expand...
Click to collapse
True Move H in Thailand.
I don't think it's a carrier issue, as I can put the SIM into my Note 1 and get H or H+ data connection straight away.
Also, I compared the APN settings and I have the exact same settings in the Note 2 and Note 1.
Mobile data was working on the Note 2 when I first got it.
Thanks,
Rich
Turn mobile data on in settings/data usage.
I doubt that his data is turned off in the settings is the problem since he already stated that he tried resetting to factory settings.
I'd suggest simply using odin to reflash J1 onto the phone and start from scratch again. This is why the devs always remind people to do a nandroid backup. In case of situations like this.
Sent from my GT-N7100 using Tapatalk 2
Thanks. Yes, Mobile data is ticked. I tried toggling that early on in case it just wasn't connecting properly or something.
I've tried flashing the stock J1 a few ties, but no joy.
It doesn't seem to do a full install, as the circle battery mod I installed previously is still there after flashing stock J1...
I'm downloading a stock XXALIE for Thailand at the moment and will try that.
It's still got 30 mins to go, and I have to leave for work soon! So, I might have to spend the day relying on wifi when I can get it
I'm wondering if the change in boot loader has anything to do with it. (Originally had "N7100" on the boot screen and now I don't, just "Galaxy Note II")
maybe APN settings are wrong? I'm from sri lanka, and I had to add an apn for mobile data to work.
OK, I finally fixed it. Here is what I did (in case anyone else has a similar problem)
Flashed stock LJ1 via odin
Downloaded Galaxy S/S2/S3 CSC
Reset my CSC to THL
Now when it restarted it picked up mobile data signal without me doing anything to the mobile network settings.
I reflashed Omega 3 and lost mobile data again. I tried the Galaxy CSC app, but it says there is only 1 CSC.
So, I went back to stock Thai LJ1.
This time I got an OTA update straight away. After that installed I noticed the boot screen had changed back to showing GT-N7100 again.
ROM is now XXALJ3 and the modem is DXALJ1
Flashed CWM and reinstalled most of my apps from Titanium Backup.
Everything is still OK.
So, it looks like I can't use Omega ROM because it changes the CSC and I can't change it back to THL.
Is there any way to install the CSC separately after flashing Omega?
I've gotten my phone into a state where I see signal bars, I can make calls and send texts, but no LTE or H+ is displayed and if I try do anything involving the internet it says there's no network connection. Wifi works just fine.
Here's how I got into the predicament. I should have learned my lesson from last time I flashed a Verizon ROM, but I didn't, and I flashed SkyNote RC9Z-3.9.1. Data works just fine in THAT ROM, but any subsequent ROM flashed after that... the network data is completely HOSED. I've tried enabling and disabling network data in settings. I've tried flashing the Devil kernel. I've tried restoring several different ROMS from nandroid backups. All restore fine and all have completely non-working network data. Last time I ran into this I had to flash the stock image in Odin to fiz the issue. This time however, that didn't work. The images flashed successfully, but upon reboot all I got was a a welcome screen bootloop of the samsung swirly logo and the T-Mobile logo.
I'm guessing this has something to do with the 4.3 bootloader? I'm downloading T889UVUCMK7_T889TMBCMK7_TMB.zip from SamMobile site and boy is it taking FOREVER! 7 hours left on the download. My thinking thoug is that If I unzip this new 4.3 firmware and flash it with Odin (or Kies if I absolutle have to) my device will start behaving again, and Network data will work, and I can go about ROM flashing and hopping again (though I'm gonna stay away from those Verizon ROMs let met tell you!).
Does anyone else have any other suggestions on what I can do to get my data back or to patch my bootloader to the 4.3 version? I was looking at this thread and wondering if it's safe to follow this procedure for patching once I have installed the 4.3 stock image:
http://forum.xda-developers.com/showthread.php?t=2500823
Any help is appreciated.
ddi you check your APN settings?
Probably your apn like iamsixnine said
Sent from my GT-I9305 using Tapatalk
I apologize if i am not as clear in this post as I need to be. My dad tried to root his note 2 sgh i371 using odin but said that once he did this, he was unable to access the internet outside of connecting to wifi, he could not get any cellular data. Because of this issue, he tried to then un-root his phone by flashing 4.1.2 stock rom. Unfortunately, the issue of not being able to get cellular data persists. In his frustration, my dad bought a note 3 and gave his note 2 to me saying that if I could fix it I could keep it. This is my first android and I would like to make it my primary phone if possible. what I would like to simply to reset the phone to factory default settings by flashing the latest stock rom for the phone. I have Odin, I was hoping that someone could tell me where I could get the latest stock rom and, if they believed that flashing it would fix the cellular data issue. I do not believe my dad made a backup at all. Thank you in advance.
Can someone please help me.
A few days back I attempted to root my SPRINT NOTE 4 (SM-N910P) Android 5.0.1. [/B]The first root was somewhat successful, however it did not trip KNOX. When I tried to Re-root it, I bricked my phone. In a panic I tried to wipe my phone and restore back to STOCK, but mistakenly selected/checked to wipe the INTERNAL data using TwRP Recovery and totally wiped the phone clean. I then called Sprint to have them switch the line back to my NOTE 2. I think that, there is where I made the mistake. I should have left the line on my NOTE 4 and then Re-Installed the STOCK ROM or a Custom ROM.
I eventually installed CYANOGENMOD 12 (CM-12) hoping that somehow it would fix my problem. Well CM-12 worked, it installed perfectly. I even reflashed back to STOCK, but I could not connect to SPRINT'S LTE Network at all. So, I could not activate the phone. I have played with all of the suggest APN Settings to no avail. I took my phone back to Sprint help but they said that they could not help me because the phone is no longer in their system. I have be searching a FIX for days and no one seems to know how to fix this problem. Can someone PLEASE help this NEWBIE out of the tight spot that I have gotten myself in.
Got a Tab 3 7.0 from a coworker he tried to flash it
im a little knowledgeable with flashing Odin ect. i cant figure out what he did
its a SM-T217S Wi-Fi will not stay on for more than a Second BT same i used a active Ting Sim it says No sim card no data
i re flashed the Original Stock JB rom no luck
Any ideas ?
Sparky the clown said:
Got a Tab 3 7.0 from a coworker he tried to flash it
im a little knowledgeable with flashing Odin ect. i cant figure out what he did
its a SM-T217S Wi-Fi will not stay on for more than a Second BT same i used a active Ting Sim it says No sim card no data
i re flashed the Original Stock JB rom no luck
Any ideas ?
Click to expand...
Click to collapse
Have you performed a factory reset or full data wipe from recovery? (flashing an Odin package does not wipe data).
Wifi and bluetooth disconnecting can sometimes be resolved by deleting the wifi and bluetooth (or bluedroid) folders located in the /data/misc directory. A factory reset will also remove those directories and allow them to be re-generated after a reboot.
There is also KitKat firmware (4.4.2) available at sammobile.com that you could download and flash through Odin.