Stock Telus SGH-I747M, Android 4.1.1. Everything worked fine until yesterday, did not install anything which could have caused this problem.
When I set my lock screen options (I had a password set before, but I've tried with every option), it will work the first time I turn the screen off. But as soon as I unlock the phone, the lock screen reverts to "swipe". I've also noticed that the "Lock automatically" option now only displays "immediately" and doesn't give the timeout options it used to.
Has anyone else experienced this or have any idea how to fix it?
Related
Hey fellas, to lock my phone I use the pattern lock, but since yesterday every time I lock the phone with power button or sleeps itself after 2 minutes, it doesn't show me the 'draw pattern screen', just the regular 'slide to unlock'.
So, I go and set the pattern up again, and lock it, it shows the 'draw pattern screen' and only shows once, after I lock the phone again, it won't appear anymore.
I'm using CM6.1.1, obviously rooted phone.
Any help or suggestions? Moderators feel free to move this post to cyanogen's thread if needed. Don't know if this might be a problem of CM itself.
Did you enable any of the quick unlock settings in Cyanogenmod settings? I bet my breakfast (which I already ate, sorry) that its because you need to review those CM settings. In User Input or something or other.
Uncheck all of those settings (that enable quick unlock)
(besides those pattern locks are easily hacked -- with the right light and the right amount of grease from your finger anyone can see your "path to unlock" - Im just sayin!)
Sorry man, that quick unlock feature is definetly not checked, it's under "settings/cyanogenmod settings/input settings", quick unlock not checked.
U owe me a pancake lol.
I dont remember getting creative with locking and unlocking settings, the weirdest thing I did was to install a few themes to the phone. Imma try putting everything to default, and start from there.
I've experienced some unlock and lock issues with cm6 aswell. It seemed as if there are settings that conflict with eachother. What happened to me was I changed it to rotory unlock with lock set to immediately engage on screen off. After changing that it wouldn't lock but the screen would turn off. I had to set it to 1 second and then reboot then it would lock just fine.
Sent from my HTC Vision using XDA App
What surprises me is that it stopped working for some reason, because I've been using cm6.1.1 for a couple of weeks and worked perfectly..
Sent from my HTC Vision using XDA App
don't remember where the setting is but it sounds like the time-out setting is not proper, the phone does not lock right away if it is sitting on the table and goes to sleep on it's own but you can set it to do that, i had mine set to 30 seconds so that if the screen turned off while i was waiting for something to download or happen i didn't have to unlock with my pin each time. look through the settings (probably security or cm settings) for the proper tweak, i would give better instructions but i'm currently on miui ROM
g_grey said:
don't remember where the setting is but it sounds like the time-out setting is not proper, the phone does not lock right away if it is sitting on the table and goes to sleep on it's own but you can set it to do that, i had mine set to 30 seconds so that if the screen turned off while i was waiting for something to download or happen i didn't have to unlock with my pin each time. look through the settings (probably security or cm settings) for the proper tweak, i would give better instructions but i'm currently on miui ROM
Click to expand...
Click to collapse
Yeah, these settings are found under CM Settings->User Interface (down at the bottom). I don't think these will be the cause though, since the OP said he didn't really mess with any of the settings. Also, I don't think the settings would cause the "Slide to Unlock" screen to appear (the phone would simply turn the screen back on to whatever was last on, no pattern unlock, no lock screen).
Have you installed any new widgets or lockscreen apps recently? Out of curiosity, have you tried any of the other lock types just to see if they do the same thing (like PIN or password).
Hi all,
One thing that I wish I could do with my phone is have the swipe lock always turn on when the screen goes off, but the security lock only come on automatically after a set time. As is (on MC2), I find that it's all or nothing. With the swipe lock activates with the pattern lock or neither activates. I've been using the security lock for a while, but with the screen turning on at every text, I was hoping to have the swipe lock so I don't butt-dial people.
Is this possible? I had this option when running a custom ROM on my Evo 3d. I'm on the stock, rooted, deodexed, MC2 ROM. Do any of the custom ROMs offer this option?
Hello,
My Galaxy Note 2 has been doing something strange the last few days.
The swipe to unlock screen comes on in addition to any other locking screen lock mode (pattern, pin). Even if I disable "With swipe lock" under settings/Lock Screen.
The swipe screen also ignores any settings under "Lock screen options" and always comes up with the default shortcuts and camera. Which means anyone can get to my email, browser or camera without unlocking the phone.
This seems like a bug. Anyone else encountered this?
-PW
similar issue
i had similar problem... the lockscreen image used to flash often.... on my stock rom...
anyways.... its not happening now on JoelDroid N2 V3
It turned out to be some stupid Homebase app that installed itself along with another app. I'm not sure which app was the offender since I uninstalled a bunch at and haven't reinstalled them all yet to figure out which one it was.
I'm curious if anyone else has had this issue. I have to enable a PIN or pattern lock to allow a corporate secure wifi network setting to be saved and for something else (I think for my bank app). From the G4 settings it seems like you can set it to NOT lock when turning off with power button (last option), and a 30 minute timeout before it auto-locks. Yet despite that, mine still seems to lock requiring a pattern input and not just a swipe if I leave it on the table for just a minute. What am I missing?
Thanks all!
Verizon LG G4 VS986, stock.
CPngN said:
I'm curious if anyone else has had this issue. I have to enable a PIN or pattern lock to allow a corporate secure wifi network setting to be saved and for something else (I think for my bank app). From the G4 settings it seems like you can set it to NOT lock when turning off with power button (last option), and a 30 minute timeout before it auto-locks. Yet despite that, mine still seems to lock requiring a pattern input and not just a swipe if I leave it on the table for just a minute. What am I missing?
Thanks all!
Verizon LG G4 VS986, stock.
Click to expand...
Click to collapse
These settings are under Lockscreen. Right at the end. It should work, unless you have another app controlling locking.
Exactly.. it "should work"... but it isn't. It insist on locking all the time.. Could the fact that I"m connected to said secure WIFI cause that?? (vs just having an entry for it)
You could try going under the setting for Security - Phone administrators. Look if there is something that is controlling phone lock.
I know for my example, I must enable PIN locking, but my phone administrator for that account enables up to 30 minutes before forcing lock. So as long as I uncheck the setting for "Lock phone immediately on power button," my phone will immediately be unlocked within a 30 minute window where I don't need to enter my PIN.
KingFatty said:
You could try going under the setting for Security - Phone administrators. Look if there is something that is controlling phone lock.
I know for my example, I must enable PIN locking, but my phone administrator for that account enables up to 30 minutes before forcing lock. So as long as I uncheck the setting for "Lock phone immediately on power button," my phone will immediately be unlocked within a 30 minute window where I don't need to enter my PIN.
Click to expand...
Click to collapse
Right, that's what I'm going for / expecting. I have 3 in there, Android Device Manager, Support & Protection (Verizon thing it looks like) and AirDroid. Only Android Device Managers is checked ON. ADM can obviously affect the lock screen and can change the lock password, but I don't see anything else which would affect this timeout being ignored. hmmmm
(Thanks, BTW!)
I was looking at my Smart Lock section and read the blurb about On-body detection, which was the only Smart Lock I had enabled. It says "Just unlock once and your device stays unlocked as long as you keep holding your device or carry it on you." .... "Your device will lock when it detects that it's been set down"..!! So, I've now turned on-body detection OFF as, in this case, it's working against me. Seems it's not too well integrated with the other options (ignores the Security Lock Timer).
If I don't post back, it's probably working as hoped.
Disabling on-body detection has definitely solved my issue with the G4 locking shortly after setting it down on the desk.
SOLVED
This has been annoying me lately but I don't know when it started. I'm running 5.1.1, using fingerprint lock (tried also with pin lock, same thing), with a 10 minute delay of locking after screen off. For some reason, in the lock screen I no longer have access to quick settings, even when the screen isn't pin/fingerprint locked (within the 10 minutes). Was this changed on purpose for "security purposes" and now even when you don't want the lock screen protected, you have no access to quick settings?
Is it just me? Or is that the way it's meant to be/has always been?