So , let's start again with jb kernel .
It's only for stock JB(4.1.2) based rom, don't use it for AOSP BASED ROM (CM9,CM10,CM10.1,AOKP,EOS, etc... ) I'm not responsible for any damage caused by my kernel , use it as your risk
Features
[V1] Prerooted and with cwm recovery (thanks to Doomlord)
[V1] CPU OC up to 1900 Mhz and UC to 30 Mhz
[V1] Build Optimization
[V1] Compiled with Linaro
[V1] VDD sysfs (voltage control interface)
[V1.1] Boot freq capped at 1512Mhz
[V1.1] Upstream to Linux 3.4.3
[V1.1] Two version : 1.7 Ghz and 1.9 Ghz
[V1.4] WriteBack tweaks
[V1.4] Gpu 2D/3D OC
[V1.4] Tweaked a bit Lionheart
[V1.4] Use glibc for memcpy and memmove
[V1.4] Increased Sd card cache(READAHEAD)
[V1.4] LINUX 3.4.4(from 3.4.0)
[V2] Added and tweaked MpDecision to have best performance and battery life
[V2] LOAD_FREQ (4*Hz+61) avoids loadavg moire
[V2] Some scheduler Tweak
[V2] Pipe compiling
[V2] Arm Thumbee support
[V2] Emmc latency decreased (more reactive)
[V2] Tweaked slub allocator
[V2] Tweaked Lionheart Governor to be less aggressive , so more battery friendly
[V2] Tweaked Pegasusq Governor to be more interactive and with better hotplug decision
[V2] Linux 3.4.20
[V2] Reworked a bit GPU OC
[V3] Improved WorkQueue for high priority
[V3] Switched build optimization
[V3] Tweaked Badass governor
[V3] msm :kgsl : Process all idle checks
[V3] Cpu1 fix : Cpu1 will follow cpu0 governor and min/max freq
[V3] Added Simple GPU governor (thanks to @faux123 ) ->>>>>>>>> To enable it use Trickster Mod app or Fauxclock app
[V3] Base for thermal management
[V3] Switched to westwood TCP congestion algorithm
[V4] Updated Fm radio drivers from CAF
[V4] Added Fastcharge , thanks to @DooMLoRD http://forum.xda-developers.com/showthread.php?t=2305591
[V4] Added optimized AES and SHA1 algorithms
[V4] Enabled thermal managment
[V4] Enabled Mpdecision inputboost
[V4] Enabled NTFS
[V4]Enabled UTF8 (unicode character)
Governor
[V1] Enabled Interactive governor
[V1.4] Lionheart governor
[V2] Added Pegasusq governor -> [Removed in V3 ]
[V3] Added Badass governor ( thanks to @show-p1984 )
[V4] Added Dancedance governor
Scheduler
[V1] Added SIO scheduler
[V1.4] Added Zen scheduler
[V2] Added Row scheduler
[V3] Added Fifo scheduler
[V3] Added Row scheduler
[V3] Added Fiops scheduler
Credits
Doomlord for his ramdisk and for helping me http://forum.xda-developers.com/showthread.php?t=2305591
Sony for the source
Dpiroto for the bootlogo (it's the same of the ICS v3.1)
Showp1984 for mpdecision and help
Faux123
Download link
V4 1.7 GHz version :https://app.box.com/s/9oadz509u6jw7epsp0p5
V4 1.9 GHz version :https://app.box.com/s/408x8ft0ar48qbesocc7
Older version
1.9 Ghz version V1.4 : https://www.box.com/s/65palxlrf2csznvccyb9
V3 1.7 Ghz version : https://www.box.com/s/vnfd8qo08554i4jq82zh[/URL]
V2: 1.7 Ghz version : https://www.box.com/s/zq1utioo2ucjcug68bqy
V2: 1.9 GHz version : https://www.box.com/s/6p0v26wode816plmvwa5
1.7 Ghz version V1.4 : https://www.box.com/s/2ss323q9v71m5dak5b2m
My sources are visible on github : https://github.com/Forzaferrarileo/fuji-msm8660-JB-3.4.0
The thread is going to be improved
The bootlogo is going to be changed
FAQ
WIFI PROBLEM
If you want leave my kernel , remember to flash stock wifi modules in recovery . You can download it from here : https://www.box.com/s/jcl0as39lz1zxdlcwrcc
[PAY ATTENTION , ITS ONLY FOR V2 ]If your wifi doesn't turn on try to reflash the kernel , or flash this : https://www.box.com/s/fhjo0zfciti5gfab7dt7
if the problem persist , reflash it in recovery and next fix permission
Does the kernel boot with those frequencies or the stock ones?
WOOOW..... XS has so many great developer ...... thank you ... will try this ... :good: :good: :good:
revan17 said:
Does the kernel boot with those frequencies or the stock ones?
Click to expand...
Click to collapse
Yes the kernel boots at 1900. This evening 1.7 ghz version and also 1.5 ghz. V2 will have boot freq capped at 1512 mhz
Sent from my LT26i using xda app-developers app
thanks for your good work
can i use this for SL too?
Jamal_RS said:
thanks for your good work
can i use this for SL too?
Click to expand...
Click to collapse
Yes
Sent from my LT26i using xda app-developers app
Forzaferrarileo said:
Yes
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
hi ..i use xs
on first run i've got 10117 score on antutu v3.3 ( antutu set on 1900 mhx x 2, even though i set on 1.782 mhz ) ...., using no frills cpu and set to 384 - 1.782 , interactive and sio ....
on other run ( 5 time ) , no mather seting on no frills cpu i use, the score never get pass 6000 .... did i miss something ?
Try setting both cores with performance governor, which keep the cpu at max freq.
The frequencies above 1728 mhz(1782 , 1836 and 1900) have an overclocked bus (360 mhz instead of the stock 310) , so you'll get more boost using these frequencies.
Sent from my LT26i using xda app-developers app
. elf file please.
edit: sorry, elf file included. thanks.
Sent from my LT26i using xda premium
jaxzkeren said:
hi ..i use xs
on first run i've got 10117 score on antutu v3.3 ( antutu set on 1900 mhx x 2, even though i set on 1.782 mhz ) ...., using no frills cpu and set to 384 - 1.782 , interactive and sio ....
on other run ( 5 time ) , no mather seting on no frills cpu i use, the score never get pass 6000 .... did i miss something ?
Click to expand...
Click to collapse
During test put phone into fridge (freezer is the best), coz it reaches 80*C and decreases freq to 800MHz. In freezer it doesn't heat itself so much But I got 10260 points and I don't think that more is reachable without any other tweaks than OC...
How is the performance? Anyone tried play games with this kernel?
I'm on Trinity's kernel right now and it works great ,performance is very good and games work super fast. Please ,any feedback?
davidbar93 said:
How is the performance? Anyone tried play games with this kernel?
I'm on Trinity's kernel right now and it works great ,performance is very good and games work super fast. Please ,any feedback?
Click to expand...
Click to collapse
For now only Antutu, but 2d/3d is similar, so should be similar
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
kubekpop said:
For now only Antutu, but 2d/3d is similar, so should be similar
Click to expand...
Click to collapse
There's no gpu oc, this will come later
Sent from my LT26i using xda app-developers app
What's the difference between this and doomkernel? Except overclocking coz I don't use it
Sent from my LT26i using xda app-developers app
Forzaferrarileo said:
There's no gpu oc, this will come later
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
All right, but does it give sth? On ICS it didn't give any points for me, dk how about games...
zaidx said:
What's the difference between this and doomkernel? Except overclocking coz I don't use it
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
Governor
[V1] Enabled Interactive governor
Scheduler
[V1] Added SIO
Also the compiler and the build optimization(they made a very little speed up)
Sent from my LT26i using xda app-developers app
Forzaferrarileo said:
Also the compiler and the build optimization(they made a very little speed up)
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
Thanks Linaro 4.7 Works xD
1.9Ghz?
Nice, but XS won't last long with that kind of OC...
Excellent work, many, many tnx but are you sure it's wise to OC to 1.9?
Sent from my LT26i using Tapatalk 2
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SaberKernel This Kernel Is Compatible with all TW/Samsung based JB ROMS for this device--- (Not AOSP)
READ, READ, READ before downloading, flashing, or posting questions
Not all phones are created equal meaning some phones will not handle Overclocking / Underclocking or Undervolting as well as others.
Features
Kernel Version 3.0.96
UC to 100
OC to 1960
UV Support
Added Support For 3rd Party OC apps---
Advanced Power Emulation
Default Scheduler= Zen
Default Governor= Pegasusq
Default boot set to 1600
Built using arm 4.4.3 toolchain
Ramdisk Mods to support Custom Boot Animations
Boeffla Sound Support
Touchwake
GPU Control
Github
In my GITHUB you can find my sources and code changes
Credits
Samsung for Official Source Code
Andreilux
Faux123
Cmenard
Simone 201
Gregkh
Sarcastillo
supercurio
Der Teufel
Ezeekel
ZaneZam
Yank
Instructions
TWRP Recovery HIGHLY Recommended!
-Download Kernel
-Nandroid
-Flash Kernel
-Boot system and DO NOT TOUCH FOR 2-3 MIN
Changelog
Code:
10|03
Upgrade to Linux 3.0.97
Revert of GPU edits to fix glitches in Graphics/reboots
Raise Voltages on 1960 for stability
Update zram_drv.c … thanks to insanemal
9|26
Raised Max Clock Speed --1960
Edits to GPU Clocks and scaling for Max performance (while preserving battery at stock values)
New compression
ADB Remount Enabled
9|18
Complete Rebuild from Updated Source
Zen default sched
Upgraded to 3.0.96
Fixed GPU freq scaling
More voodoo code removal
9|11
Upgrade to Linux Version 3.0.95
Edits to GPU Voltage Allocation
Boeffla Sound Replaces Voodoo (by request)
Boeffla and Trickster apps now added with flash
Clean Up of Version
Remove Dirty in Version Description
USB Charging Rate Increased to match A/C rate
ZZmoove Updated to 7d
Fixed Memory/cache leak that was causing instability and poor battery
8|28
I have been slacking on releasing kernels outside of my ROMs so this changelog is kind of a mess.
If you cannot follow the log please see my git for itemized changes
--Upraded to Linux 3.0.93
-- Added in exfat module source thanks to Faux123 and SORC
-- ZZMOOVE updated to v0.7 (ZaneZam/Yank)
-- LulzactiveQ added in (Gohkanmoral)
-- Upgraded to Linux 3.0.91
-- Wifi driver edit for reduce wakelock
-- All sources Merged!!
-- Upgraded to Linux 3.0.87
-- Added ZZMOOVE
---- zzmoove edited to support more frequencies
-- Edits to WIFI handling for less wakelock issues/performance
-- Some Peg gov Edits
-- Edit to I/O que
-- Edits to kernel/module.c in hopes of further work on exfat later on
7|2 --
Upgraded to Linux Version 3.0.84
New Under Clock Frequency --STABALIZED
- 100 mhz UC all set
Triangle away support
---All testers have reported back as things being stable and most
have run it through intensive and reg use and no SOD at 100mhz low.
I believe the times of certain devices not liking the low step is over. Have Fun
6|24 --
Upgraded to Linux Version 3.0.83
2 Versions
--- One with UC for those who's chips dont mind
---One Stock Low end
New Under Clock Frequencies
- 120 mhz UC VERSION ONLY
Edits to Peg GOV in Both Versions
6|19 --
Upgraded to Linux Version 3.0.82
New Under Clock Frequencies
- 160 mhz
- 140 mhz
6|13 --
Complete Clean Rebuild from updated sources
Linux 3.0.81
ZRAM
Freq Voltage Edits
Compression Edits
Freq "Bleeding" fixed
Intelliplug/Ecomode
More Mali Edits
Dynamic Filesync
5|05 --
Upgraded to Linux Version 3.0.76
GPU Handling is Back And Fixed
Touchscreeen Mods
TouchBoost Control Added
SetLocalversion Modification ( Just Shows differently in about)
More...
4|26 --
Upgraded to Linux Version 3.0.75
TouchWake Added (Control With TricksterMod)
Voltages/Voltage interface Fixed for Undervolting Compatibility
FlexRate Edits
Fsync Edits
IntelliPlug
4|18 --
Upgraded to Linux Version 3.0.74
Edits to Freq/Voltage Handling
4|11 --
Upgraded to Linux Version 3.0.72
sysfys-helpers edit
double flexrate
Voltage control/UV voltage edits
Freq Edits
3|20 --
Upgraded to Linux Version 3.0.69
Etc
3|11 --
Voodo Sound Enabled
Upgraded to Linux Version 3.0.68
2|22 --
MHL Tv Out Audio Officially Fixed Damnit lol
Updated to Linux 3.0.64
2|15 --
Edit Frequencies
-OC to 1920
-Fix for CPU sticking Etc
-Removed GPU Edits From Last Version For Now
2|6 --
Mali Rework
GPU Can Now Be Adjusted By 3rd Party App
Ramdisk Modifications
- Fixed Memory Swap
- Probable MHL Audio Fix
Edit to Module.c
Added Lazy Governor
Added BFQv5 Sched
Added V(R) Sched
Set ReadAhead to 1024
Fixed Wonky Frequencies: No Issues With 3rd Party Apps Holding Freq
2|4 --
3.0.59 Revised
3.0.60
3.0.61
1900mhz OC!
Voltage Optimization
Edits to mali/gpu
Increased Charging Rate
2|1 --
Linux 3.0.59
Deadline Edit
Edits to sched.c
Multiple Updates from Samsung OSRC
1|28 --
Updated 27 Kernel Versions to Linux Kernel Version 3.0.58
-(ALOOOTTT of code updates)
Update to device sensors
1|21-- Initial Public Release
Downloads
SaberKernel_45.3- http://d-h.st/MkN
Support this Development By clicking this Button,,, Thank you
http://forum.xda-developers.com/donatetome.php?u=4488450
Guide to Thread Participation":
Generally speaking, we are a pretty calm group of people, but as with so many other things in life, there are those that evoke a negative response from the very start. THAT is why we are such believers in maintaining a polite, respectful thread. Most everyone here is eager to help, and the only thing we ask is (despite the associated tedium) read the entire thread, it can only help. If and when you are still stuck, feel free to ask questions, we're all here to help one another.
--TMobTim
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
XDA:DevDB Information
|KERNEL| SaberKernel_45.3 || 3.0.97 || UC-100mhz || OC-1960mhz || exFAT | 10|03, a Kernel for the T-Mobile Samsung Galaxy Note II
Contributors
ptmr3
Kernel Special Features:
Version Information
Status: Stable
Created 2013-09-11
Last Updated 2013-10-03
Thanks.. will give 8 a try.
I wish someone would invest some time in making a AOSP kernel with uv.
this kennel will support ExFat ? thank ,Ptmr
Re: |KERNEL| SaberKernel |3.0.31| 1|21
going to work with att? or are u posting there next?
Sent from my SGH-I317 using xda app-developers app
Re: |KERNEL| SaberKernel |3.0.31| 1|21
redrider54 said:
going to work with att? or are u posting there next?
Sent from my SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Post says will work with all touch wiz roms.
Sent from my SGH-T889 using xda premium
Re: |KERNEL| SaberKernel |3.0.31| 1|21
yeah but just not sure if its proprietary to t-mobile only, like tweaks designed just for it or not..
Sent from my SGH-I317 using xda app-developers app
Re: |KERNEL| SaberKernel |3.0.31| 1|21
redrider54 said:
yeah but just not sure if its proprietary to t-mobile only, like tweaks designed just for it or not..
Sent from my SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
I will ve posting saber for att as well later
Sent from my SGH-T889 using xda app-developers app
Re: |KERNEL| SaberKernel |3.0.31| 1|21
ptmr3 said:
I will be posting saber for att as well later.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Sent from my SGH-T889 using xda app-developers app
No offense or disrespect but I went back to my back-up. It seems 8 less snappier than 7 that came with X9. Thanks for your hard work, really appreciated just reporting what I experience on 8.
Re: |KERNEL| SaberKernel |3.0.31| 1|21
zoth said:
No offense or disrespect but I went back to my back-up. It seems 8 less snappier than 7 that came with X9. Thanks for your hard work, really appreciated just reporting what I experience on 8.
Click to expand...
Click to collapse
Then re flash, 8 catches an extra 1000 on antutu, and is much snappier for me and my testers
Sent from my SGH-T889 using xda app-developers app
Re: |KERNEL| SaberKernel |3.0.31| 1|21
ptmr3 said:
Then re flash, 8 catches an extra 1000 on antutu, and is much snappier for me and my testers
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Im going to agree I am a much bigger fan of 8 over 7
Sent from my SGH-I317M using XDA Premium HD app
Re: |KERNEL| SaberKernel |3.0.31| 1|21
Went ahead and flashed 8 on master and it is much faster! I flashed via cwm no issues
Sent from my SGH-T889 using Tapatalk 2
ptmr3 said:
Then re flash, 8 catches an extra 1000 on antutu, and is much snappier for me and my testers
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
I guess my Note 2 does not like 8 first set of screen shots are from x9 out of the box.
This after 8 wipe cache/dalvik 3x before and after fixed permissions.
Re: |KERNEL| SaberKernel |3.0.31| 1|21
I just ran it at 41% Battery Bro & I'm getting 7300+, with 100% Battery I get 7500 to 7800.
Sent from my SGH-I317M using XDA Premium HD app
just wondering but does this kernel work with 64gb microsd cards?
Re: |KERNEL| SaberKernel |3.0.31| 1|21
bapurado said:
just wondering but does this kernel work with 64gb microsd cards?
Click to expand...
Click to collapse
Yes it does. Format your sd to fat32
Sent from my SGH-T889 using xda app-developers app
ptmr3 said:
Yes it does. Format your sd to fat32
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
How about exfat support? For those that want to get around that 4gb file size limit.
Re: |KERNEL| SaberKernel |3.0.31| 1|21
ptmr3 said:
Then re flash, 8 catches an extra 1000 on antutu, and is much snappier for me and my testers
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Lol
Sent from my SGH-T889 using Tapatalk 2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DeviantKernel This Kernel Is Compatible with all TW/Samsung based JB ROMS for this device--- (Not AOSP)
READ, READ, READ before downloading, flashing, or posting questions
Not all phones are created equal meaning some phones will not handle Overclocking or Undervolting as well as others.
Features
Code:
Updated Linux Kernel Version 3.0.63
Built with Linaro 4.7
OC - 1944Mhz
UV
GPU
Added Govs
-Lulzactive
-SmartassV2
-Pegasusq
-Abyssplug
-Lagfree
-Virtuous
Added Sched
-Zen
-Sio
-Row
Module.c edit to begin Exfat support (in the works)
Deadline sheduler edits
Sched Compute time optimization
Advanced Power Emulation
Boot Animation Support
Github
In my GITHUB you can find my sources and code changes
Credits
Samsung for Official Source Code
Gregkh
Gokhanmoral
imoseyon
Faux123
Ktoonsez
task650
showp1984
sbreen94
Instructions
TWRP Recovery HIGHLY Recommended!
-Download Kernel
-Nandroid
-Flash Kernel
-Boot system and DO NOT TOUCH FOR 2-3 MIN
Changelog
Code:
2|15--
Linux 3.0.63!
2|12--
Update to Linux Version 3.0.62
mpdecision Overhaul (showp1984)
Edits to sched.c
OC Freq Edits!
- No more issue with sticking/ settings not sticking
- Lowered Max OC but with better performance than 1988
Better Battery Managment
More responsive
Lower Temp
2|1--
Remove Gentle_fair_sleepers (Better Performance)
Optimizations to Interactive
Revert Edits to Core behavior
2|1--
Linux 3.0.61
Added
-Abyssplug
-Lagfree
-Virtuous
Total Interactive Overhaul
Conservative Edit
SmartassV2 Edit for better battery
Charge Current Interface && Default Charge Current Increased
1|28--
Added 192 as Min Freq
Upped OC to 1988
Voltage Edits
-Complete Pegasusq Overhaul
Added Schedulers
-Zen
-Sio
-Row
1|25--
Initial Release
HTML:
Note To Donators!
Every donation is more than appreciated! To show my appreciation for my
supporters, I will now begin listing every Donator in the OP as a special
thank you.
THANK YOU
Special Thanks To The Following Supporters Of This Kernel
*Akapaul26
* Steely123
Downloads
My Recommended Settings: Pegasusq Gov & Either Zen or CFQ Scheduler
DeviantKernel_06-- Download
Read About Some Different Governors HERE
If you dont find one you are looking for there, Google is a GREAT tool
mine
Mine. Well this seems interesting.
Sent from my SPH-L710 using Tapatalk 2
Nice another kernel! Looking forward to trying it out!
Sent from my SPH-L710 using xda app-developers app
Going to try kernel on goodness 8.0.5 will let you all know how it is... Thanks for the new kernel
Sent from my SPH-L710 using xda premium
If you dont mind me asking what is your GPU OC set at? Or is it at stock? Just curious as I was going over OP. Will def check out this kernel either way. Appreciate the work and the contribution.
ill give it a spin
Cool something new!!! Much appreciated!
Sent from my SPH-L710 using Tapatalk 2
Love seeing a new kernel. I'm on it. Much tks!:thumbup:
Sent from my SPH-L710 using Tapatalk 2
Any reccomendations for a kernel tunning app for this kernel??
Going to try this out
Whenever I try and change the governor in setcpu my phone freezes and reboots... TN MA4.1.2 stock rom
Sent from my SPH-L710 using xda app-developers app
Thanks for this!! :good:
Somehow my rotation got flipped with this kernel -.- lol
Sent from my SPH-L710 using xda app-developers app
twister99403 said:
Money to support that guy. No thanks. There are better free ones
sent from my anthrax ROM/kernel s3
Click to expand...
Click to collapse
then at least offer up a suggestion as the the original poster was asking...don't just drop a criticism of a developer and walk out.
https://play.google.com/store/apps/details?id=com.darekxan.voltagecontrol&feature=search_result
https://play.google.com/store/apps/details?id=rs.pedjaapps.KernelTuner&feature=search_result
https://play.google.com/store/apps/...DEsIml0LnNpbmVvLmFuZHJvaWQubm9GcmlsbHNDUFUiXQ..
ImEVO said:
Efff that...
Thanks..
Click to expand...
Click to collapse
Next time pm me, no need for this type of non-productive stuff here. You are a veteran in these posts and should know better. And, again, another post that does not offer a suggestion to the query about kernel or cpu tuners.
So, here is another option for the person who asked...
https://play.google.com/store/apps/details?id=ccc71.pmw
Sent from my SPH-L710 using Tapatalk 2
Thread cleaned
If you do not have something contributing to say then DON'T POST
I will be watching this thread now
Users causing trouble will be infracted/banned...period!
I am sick of this crap
You all think it is so easy PLEASE make your own kernel and enjoy it
Thank you for your cooperation
Friendly Neighborhood Moderator
I did experience the rotation bug w latest kernel and odex blue. Even my camera flipped... Other than that seemed really fast.
Sent from my SPH-L710 using Xparent BlueTapatalk 2
For those that like to come here from that other site and cause trouble
You should know that an agreement has been reached to permban troublemakers from both sites by NiN and myself
If you do not have a bug report or a post to contribute to further development then do not post
Thank you for your cooperation
Friendly Neighborhood Moderator
This kernel is working great for me on Stock Jellybean 4.1.1 rooted and running MA6 Modem/Radio update
I was running AGAT 0.3.3 and then tried this one - very smooth and no issues so far - can't tell battery life yet
I couldn't get KToonsez kernel working on my phone - not sure why but Deviant seems to be very nice so far!
--------------------------
Edit: Ok yeah, I do see how when you turn the phone to the right or left (sideways) the display is upside down.
Sprint phone (not Verizon) so that might be the issue - only one I've seen. I usually use the phone upright anyway so not a big deal to me.
THIS PROJECT IS NO LONGER ACTIVE
THERE WILL BE NO FURTHER UPDATES
Firstly, huge thanks go to these individuals & teams (for code I have kanged, ideas I have been inspired by, help I have received):
Pawitp, Stratosk, DerTeufel, Kasper_h, Ezekeel, Neldar, Mialwe, Edoko, and my testers kaza and saszseb
THANK YOU ALL
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a clone of my well-established non-LVM kernel but it has been turned to the Dark Side of mainstream partitoning!
It should work on all Android 4.2 ROMs that use the LVM (Logical Volume Manager) partition method, like Official CM 10.1
All kernel features (with the exception of RAM size - note below) can be activated/adjusted using NSTools
Changelog 08/05:
Code:
+ FINAL RELEASE
+ Linux 3.0.76
+ LMK Whitelisting (thanks to Stratosk)
+ USB OTG Support
Downloads:
KERNEL FOR RECOVERY
KERNEL FOR ODIN/HEIMDALL
KERNEL MIRROR
(modified NSTools included in Kernel package)
Fishears Kernel customisations:
Kernel 3.0.76
Ultra Kernel Samepage Merging
Live OC
Overclock @ 1400, 1300, 1200, 1100
Aroma Filemanager (1.80) in Recovery
Kernel compiled with Linaro 4.7-2013.03 + O3 optimization
RAM Size selectable through sysfs (see note below). 383mb (default), 396mb (bigmem), 409mb (hugemem - breaks 720p video recording so set camera to 480p before reboot)
Media libs automatically patched at reboot when RAM Size changes
720p recording option removed from camera settings in hugemem mode (thanks Kagadar)
CPU unaligned accesses enabled
LowMemoryKiller Whitelist support
[*} USB OTG Host Support
Deep Idle
BLN 9
FastCharge
Touch Wake
Battery Life eXtender
Battery polling reduced
Smartassv2 governor
Lulzactive governor
Lazy governor
Wheately governor
IntelliDemand governor
Interactive governor tweaks from 3.4
SIO I/O Scheduler (updated)
ROW I/O Scheduler
BFQ I/O Scheduler
ZEN I/O Scheduler
FIFO I/O Scheduler
tuned CFQ Scheduler
LOAD_FREQ (4*HZ+61) avoids loadavg moire
Logger from 3.4
Neon VFP enabled
Lowmemorykiller from 3.5
Time gpio from 3.4
Battery indicator in Recovery
Clear NSTools settings from Recovery
Clear init.d from Recovery
Touch key control in Recovery (Menu=up, Back=down)
Repeat on keys for up/down in Recovery
RAM Selection:
the RAM selection values are:
0 for default
1 for 396mb
2 for 408mb
To change the current setting you need to change the value stored in /sys/kernel/bigmem/enable
You can do this with a text editor or in a terminal/adb shell like this:
Code:
echo 2 > /sys/kernel/bigmem/enable
Source Code:
fishears at github
Re: [KERNEL][4.2] FISHEARS-LVM for all LVM partitioned 4.2 ROMs
1st. Now to test. So are we going to see fishears rom lvm soon too?
Sent from my GT-P7500 using xda app-developers app
Re: [KERNEL][4.2] FISHEARS-LVM for all LVM partitioned 4.2 ROMs
Thank you fishears.
Sent from my GT-I9300 using xda premium
ts1506 said:
1st. Now to test. So are we going to see fishears rom lvm soon too?
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
I pressed "submit" instead of "preview"
The post is a bit unfinished still...
An LVM ROM might happen
Re: [KERNEL][4.2] FISHEARS-LVM for all LVM partitioned 4.2 ROMs [22/02/13]
I guess i found a suitable kernel for my future lvm roms too.
The only issue i am facing is that when i tne ondemand through nstools, the sampling down factor is not sticking, whereas it sticks on semaphore with semaphore manager.
Sent from my GT-P7500 using xda app-developers app
---------- Post added at 02:34 PM ---------- Previous post was at 02:32 PM ----------
fishears said:
I pressed "submit" instead of "preview"
The post is a bit unfinished still...
An LVM ROM might happen
Click to expand...
Click to collapse
Why. What did you miss out?
Hope a lvm rom comes out too.
Sent from my GT-P7500 using xda app-developers app
Re: [KERNEL][4.2] FISHEARS-LVM for all LVM partitioned 4.2 ROMs [22/02/13]
Didn't see any Mention of auto brightness in the line up of features so am wondering if the kernel supports that and how to turn it on. Thanks for the great developmental work you are doing.
Sent from my GT-N7100 using xda premium
Re: [KERNEL][4.2] FISHEARS-LVM for all LVM partitioned 4.2 ROMs [22/02/13]
ugoms said:
Didn't see any Mention of auto brightness in the line up of features so am wondering if the kernel supports that and how to turn it on. Thanks for the great developmental work you are doing.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Auto brightness is a rom feature. Turn it on from settings, display, brightness
Sent from my GT-P7500 using xda app-developers app
ugoms said:
Didn't see any Mention of auto brightness in the line up of features so am wondering if the kernel supports that and how to turn it on. Thanks for the great developmental work you are doing.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
If you don't see it in the list then I don't have it
Re: [KERNEL][4.2] FISHEARS-LVM for all LVM partitioned 4.2 ROMs [22/02/13]
Easy boss, just asking no disrespect
Sent from my GT-N7100 using xda premium
ugoms said:
Easy boss, just asking no disrespect
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
it was typed with a big smile - sorry - I don't know what the cowboy means, is it bad? I thought it was funny...
Re: [KERNEL][4.2] FISHEARS-LVM for all LVM partitioned 4.2 ROMs [22/02/13]
Already downloaded. Thanks again man.
Sent from my GT-N7100 using xda premium
Once again, thank you very much for your hard work in making this LVM version of your kernel and for letting me test the beta :good:
I'm facing the same problem that @ts1506, sampling down factor its not sticking with NSTools neither with init.d, this is the only problem I had so far
Re: [KERNEL] [4.2] FISHEARS-LVM for all LVM partitioned 4.2 ROMs [22/02/13]
kaza said:
Once again, thank you very much for your hard work in making this LVM version of your kernel and for letting me test the beta :good:
I'm facing the same problem that @ts1506, sampling down factor its not sticking with NSTools neither with init.d, this is the only problem I had so far
Click to expand...
Click to collapse
Yes, I'll look into it
Sent from my GT-I9000 using Tapatalk 2
Re: [KERNEL] [4.2] FISHEARS-LVM for all LVM partitioned 4.2 ROMs [22/02/13]
ts1506 said:
I guess i found a suitable kernel for my future lvm roms too.
The only issue i am facing is that when i tne ondemand through nstools, the sampling down factor is not sticking, whereas it sticks on semaphore with semaphore manager.
Sent from my GT-P7500 using xda app-developers app
---------- Post added at 02:34 PM ---------- Previous post was at 02:32 PM ----------
Why. What did you miss out?
Hope a lvm rom comes out too.
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
Download Semaphore Manager and change it! After reboot it'll be stick.
Sent from my GT-I9000 using Tapatalk 2
I have a question that its not really related to this kernel but I hope that someone can help me, so my phone can handle 1200mhz with 1300mV / 1125mV set in 1200mhz step, and can run at 110% live oc with stock voltage. If I want to run 110% live oc with 1100mhz normal OC to reach 1210mhz where should I set the 1300mV / 1125mV in the 1200mhz step or 1100mhz step, I really dont know
kaza said:
I have a question that its not really related to this kernel but I hope that someone can help me, so my phone can handle 1200mhz with 1300mV / 1125mV set in 1200mhz step, and can run at 110% live oc with stock voltage. If I want to run 110% live oc with 1100mhz normal OC to reach 1210mhz where should I set the 1300mV / 1125mV in the 1200mhz step or 1100mhz step, I really dont know
Click to expand...
Click to collapse
To 1100MHz step, cause live oc makes 1100 -> 1210.
Ynt: [KERNEL] [4.2] FISHEARS-LVM for all LVM partitioned 4.2 ROMs [22/02/13]
İs this kernel for inand like your rom?
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi
I've just uploaded a new build that fixes the ondemand sampling down factor setting - see startpost
tivac said:
İs this kernel for inand like your rom?
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi
Click to expand...
Click to collapse
This kernel is for moviNAND (with LVM partition)
Re: [KERNEL] [4.2] FISHEARS-LVM for all LVM partitioned 4.2 ROMs [23/02/13]
Not only for MoviNand!
Sent from my GT-I9000 using xda premium
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SaberN3Kernel This Kernel Is Compatible with all TW/Samsung based JB ROMS for this device--- (Not AOSP)
READ, READ, READ before downloading, flashing, or posting questions
Not all phones are created equal meaning some phones will not handle Overclocking / Underclocking or Undervolting as well as others.
So far this is tested and working on:
(SD 800 Processor N3 Only!!)
SM-N900T
SM-N9005
SM-N900W8
Features
OC to 2.649GHz
UC to 266MHz
Kernel Version 3.4.75
UV Support to 700
Advanced Power Emulation
Default Scheduler= Row
Default Governor= Ondemand
Default boot set to 2..3Ghz (2.2656)
Built using arm 4.7 toolchain
Touchwake
CPU Boost Driver
Init.d
Ramdisk Mods
- Temporary patch solution for wifi, forcing change in build.prop (Jovy23)
- SELinux= Permissive
- Insecure (Remount not yet online)
Exfat Supported
Added Schedulers:
-FIOPS
-ZEN
-SIO
Edits to DEADLINE for better performance
Added Gov:
-Wheatley
USB FastCharge (USB Charges at AC level)
Faux's Overall Stats for quad core devices (This will show overall CPU frequency statistics via sysfs.)
Faux's CPU Freq Limiter (This driver limits MSM CPU frequency through sysfs file system)
More...
Github
In my GITHUB you can find my sources and code changes
Credits
Samsung for Official Source Code
Xiaolu
Faux123
DoomLord
danieljamie
dormanx
Jovy23
markbencze
livlogik
Imoseyon
Yank555!
Instructions
TWRP Recovery HIGHLY Recommended!
-Download Kernel
-Flash Kernel
-Boot system and DO NOT TOUCH FOR 2-3 MIN
Changelog
Code:
12|23--10.7
There have been many Jedi Elite exclusive versions of Saber so this is a catch up Changelog
-Upgraded to to 3.4.75!
-Touch Wake Implementation Thanks to Yank555!! (will drain battery faster)
-CPU boost driver thanks to Yank555 and Saravana Kannan
-Voltage Modifications
-Removed ifdefs. Unified kernel now
-Edits to Defconfigs
-Dropped bottom freq to 266mhz
-Voltage mods for STABILITY ;)
-Thermal edits
-Edits to Defconfigs
10|25-- 5.2
Patched All the way up to 3.4.67!! (Imoseyon responsible for patches from 3.4.6-3.4.66)
Cores should now all behave as instructed
ALOOTT of voltage work, we can now ALL Run with a RED Saber!!!
Thermal edits
Edits to Defconfigs
Ramdisk edits to improve USB connection Recognition
10|16-- 3.0
3 different kernel choices
-Green = No OC + All Features
-Yellow = OC to 2.5 + All Features
-Red= OC to 2.7 + All Features
Added Schedulers:
-FIOPS
-ZEN
-SIO
Edits to DEADLINE for better performance
Added Gov:
-Wheatley
USB FastCharge (USB Charges at AC level)
Faux's Overall Stats for quad core devices (This will show overall CPU frequency statistics via sysfs.)
Faux's CPU Freq Limiter (This driver limits MSM CPU frequency through sysfs file system)
10|15-- 2.3
-Dropped UV limit
-Work with cpu
10|15-- Initial Release (See Features List)
Downloads
READ BEFORE DOWNLOADING
SaberN3Kernel_Red-10.7
http://d-h.st/znG
Support this Development By clicking this Button,,, Thank you
http://forum.xda-developers.com/donatetome.php?u=4488450
Guide to Thread Participation":
Generally speaking, we are a pretty calm group of people, but as with so many other things in life, there are those that evoke a negative response from the very start. THAT is why we are such believers in maintaining a polite, respectful thread. Most everyone here is eager to help, and the only thing we ask is (despite the associated tedium) read the entire thread, it can only help. If and when you are still stuck, feel free to ask questions, we're all here to help one another.
--TMobTim
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
XDA:DevDB Information
|KERNEL| SaberN3Kernel_10.7 || 3.4.75 || OC for all || exFAT | 12|23, a Kernel for the T-Mobile Samsung Galaxy Note 3
Contributors
ptmr3
Kernel Special Features:
Version Information
Status: Stable
Created 2013-10-15
Last Updated 2013-12-23
mine
Great work as always bro. Killing it already!
Sent from my SM-N900W8 using Tapatalk now Free
Very nice work done, looking forward to using this when I get my note 3.
Sent from my note 2 ya bish!
You are the man, again!
Sent from my SM-N900T using Tapatalk now Free
Downloading now!!! Thank you for your hard work and support of the Note 3 :thumbup:
Sent from my SM-N900T using XDA Premium 4 mobile app
Thanks for for the Beast, banging on it right now:good:
Woot!
Sent from my SM-N900T using Tapatalk
Nice downloading now. Thanks once again ptmr3
Sent from my SM-N900T using Tapatalk
Installed fine with darthstaker rom wifi seems to be working great as well. Thanks for the kernel. Looking forward to a rom son too hopefully .
Edit: it seems that using an app like trickster mod to put the max cpu at say 1.3ghz only caps cpu 1. Cpu2,3,4 still go to 2.5ghz. Anyone else have this problem?
Sent from my SM-N900T using Tapatalk
For uv do we need trickster mod, or should setcpu work?
Sent from my SM-N900T using Tapatalk
Nice to see you around ptmr3. Been looking forward to seeing you post in here.
Sent from my SM-N900T using XDA Premium 4 mobile app
Admiral2145 said:
For uv do we need trickster mod, or should setcpu work?
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
Trickster will flash right in along with the kernel. One of the best apps for kernel control available IMO
Admiral2145 said:
For uv do we need trickster mod, or should setcpu work?
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
I usually try to stick with what the Dev uses, in this case I'm fairly certain it's Trickster, but to each his own.. Let us know either way you go what kind of results you're getting.. :thumbup:
Sent from my SM-N900T using XDA Premium 4 mobile app
This one will not go lower than 800 on voltages. Have a more aggressive kernel testing now
Sent from my SM-N900T using xda app-developers app
ptmr3 said:
This one will not go lower than 800 on voltages. Have a more aggressive kernel testing now
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
so i assume we need to wipe cache and dalvik correct? thats what i always did for kernels.
So much smoother, the responsiveness is better, not just blowing smoke. My floating toucher app is actually working flawlessly now, it would be unresponsive to my first touch half the time, now no issues .. I'm pretty happy already and I haven't done any tweaking.. So happy you're working on this device
Sent from my SM-N900T using XDA Premium 4 mobile app
XxLostSoulxX said:
so i assume we need to wipe cache and dalvik correct? thats what i always did for kernels.
Click to expand...
Click to collapse
Not necessary but you can if you want
Sent from my SM-N900T using xda app-developers app
ptmr3 said:
This one will not go lower than 800 on voltages. Have a more aggressive kernel testing now
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
When i load up tickster it shows everything from 576mhz and lower at 775. This is the default that loads for me? is it going to that or is it only really at 800.
Prod1702 said:
When i load up tickster it shows everything from 576mhz and lower at 775. This is the default that loads for me? is it going to that or is it only really at 800.
Click to expand...
Click to collapse
It is that low, but if you go to change them, they will default to 800. I will have a fresh one up in maybe an hour
Sent from my SM-N900T using xda app-developers app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to Quantum, a ROM built around having the latest (stable) boosts in speed possible, a constantly updated base and upstream merges from Kernel.org and CodeAurora for the newest features and bugfixes.
Quantum.4 Changelog
Quantum.4-
Based on SlimKat, tweaked to Quantum standards
Utilizes the GCC 4.8.3 SM Toolchain for the ROM
Utilizes the GCC 4.9 SM Toolchain for the Kernel
Forced the ROM into hard float mode for faster math performance
-O3 optimizations for the ROM and Kernel
Upstream with all Android optimizations at Googlesource
Forced compiler to build for A15 chipset in lieu of A9
Random GCC optimizations throughout ROM
Heavily optimized Dalvik
Synced and optimized Bionic with OpenMaster
EXFAT support
Scalable DPI built in
The Real Dark Slim
Shake to Secure
Navigation Buttons
Much much more...
Quantum Kernel 4/27.4-
BFQ updated to 3.4.0-BFQ-v7r3 (First!)
Tweaked BFQ for flash media and performance
Quick CPU_Util checker
Custom Quantum GCC 4.9.1 for Krait
Align build with GCC Graphite/remove unnecessary and harmful optimizations
Linux 3.4.88
Workqueue updates
Simplify hotplug code
Optimize cpufreq tables for quicker access
Low-Memory Killer tweaked in same was as our OoM
Native Hashtable for Workqueue so it doesn't have to be placed everywhere
Audio stutter fixes
Fix a mismatch
Click to expand...
Click to collapse
DOWNLOADS
Quantum.4- http://d-h.st/pgJ
QuantumKernel 4/27.4- http://d-h.st/j6i
AIO GAPPS- http://d-h.st/0SD
Barebone GAPPS- http://d-h.st/vEL
Google Camera Compatibilty Fix- http://d-h.st/8jy
ExFAT Fix- http://d-h.st/ELH
Click to expand...
Click to collapse
QuantumKernel Features
GCC 4.9
User Voltage
Dynamic FSync for improved battery life
Simple GPU Governor
FRandom
Governors: Asswax, Intellidemand, Intelliactive, SmartMax, Ondemand, InteractiveX
I/O: SIO, TripnDroid, FIFO, ZEN, SIOPLUS, 0 ms deadline, BFQ, FIOPS,
Auto Hotplug
Extreme battery optimizations from Power Efficient Workqueues to ARM Topology, and numerous others
Universal screen off frequency for any governor
Dynamic Dirty Page Writeback for better speed and battery life while screen is on
Increased Sound Quality through overclocking of hardware
Click to expand...
Click to collapse
Flashing Instructions
Download ROM and GApps
Reboot into Recovery
Wipe /system, /cache, /dalvik, and data (ONLY SYSTEM, CACHE, DALVIK CACHE IF DIRTY)
Install ROM, install GApps, install latest kernel
Wipe Cache/Dalvik Cache
Reboot system!
Click to expand...
Click to collapse
Kernel Source
Credits
mastamoon
Chris123TNT
nardholio
aeppacher
imoseyon
ktoonsez
gideonx
All my great users: for most of them being here since the beginning, this one's to you
Click to expand...
Click to collapse
Woot something new to flash ☺ I'm assuming it's a d2lte?
Thanks for starting a thread here, been a big fan of Quantum kernel since finding it on the AT&T forums a few weeks ago. Keep up the good work!
Knew about this great kernel but didn't know you had a Quantum ROM as well (and based on the best, SlimKat!). Thanks for putting this in the Sprint thread as well.
It's all d2lte but there's also some fixes in there to make sprint LTE work. Enjoy it!
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Bah for some reason, I can never flash this and go back to another kernel like LeanKernel. I just flashed this and noticed it doesn't have interactiveX built in (at least not according to Trickster Mod), so I reflashed Lean Kernel and while it doesn't boot loop, I get tons of system process FCs at startup yielding the phone pretty much useless until I flash Quantum again. Any reason that is? I've usually gone between different kernels like stock, Lean, and BMS without any issues.
Anyway, going to test drive Quantum for a bit with the smartmax / row combo.
Thread cleaned. Linking to banned members work is against the rules, please refrain from further posts of this kind.
Thanks.
MOD UNIVERSAL BOOST APN FIX FOR D2LTE BUILDS FLASHABLE ZIP.
http://androidforums.com/boost-mobi...universal-boost-apn-fix-d2lte-builds-mod.html
Sent from my SPH-L710 using XDA Premium 4 mobile app
Flashed this late yesterday evening (after trying AICP) so far so good. Can someone explain to me like a 5 yr old how this differs from Slim ?
Sent from my Quantum-Energized SPH-L710 using xda premium
TexasLTE said:
Flashed this late yesterday evening (after trying AICP) so far so good. Can someone explain to me like a 5 yr old how this differs from Slim ?
Sent from my Quantum-Energized SPH-L710 using xda premium
Click to expand...
Click to collapse
An extreme amount of optimizations that increase performance and battery life.
TexasLTE said:
Flashed this late yesterday evening (after trying AICP) so far so good. Can someone explain to me like a 5 yr old how this differs from Slim ?
Sent from my Quantum-Energized SPH-L710 using xda premium
Click to expand...
Click to collapse
That explains things at a 5 yr level - THX :thumbup: ... OP you might wanna put a possible seizure disclaimer regarding the boot animation
Sent from my Quantum-Energized SPH-L710 using xda premium
nimaim said:
Bah for some reason, I can never flash this and go back to another kernel like LeanKernel. I just flashed this and noticed it doesn't have interactiveX built in (at least not according to Trickster Mod), so I reflashed Lean Kernel and while it doesn't boot loop, I get tons of system process FCs at startup yielding the phone pretty much useless until I flash Quantum again. Any reason that is? I've usually gone between different kernels like stock, Lean, and BMS without any issues.
Anyway, going to test drive Quantum for a bit with the smartmax / row combo.
Click to expand...
Click to collapse
InteractiveX only has a screen off profile, I enabled it for all governors,
TexasLTE said:
That explains things at a 5 yr level - THX :thumbup: ... OP you might wanna put a possible seizure disclaimer regarding the boot animation
Sent from my Quantum-Energized SPH-L710 using xda premium
Click to expand...
Click to collapse
Yeah... it's nice isn't it?!
I found a few cool images to use as wallpaper
Is this sprint d2lte any different than the one released on at&t forum? I'm on boost using at&t release and signal isn't great. Would you recommend I try flashing this one? I will eventually when I get a chance. I'm on L710
Sent from my SPH-L710 using XDA Premium 4 mobile app
TexasLTE said:
I found a few cool images to use as wallpaper
Click to expand...
Click to collapse
Lol please no
Sent from my SPH-L710 using XDA Premium 4 mobile app
Yeah! LTE once again! Bravo developer!
Sent from my SPH-L710 using Tapatalk
Following the download link takes you to the "flo" build. Also following the d2lte" folder and "quantum.4" reveals nothing in folder
Sent from my SPH-L710 using Tapatalk
Flashed the rom but lost root. Restored my backed up rom.
Just installed and enabled root for apps and adb, but root is broke. I can't get titanium to work as it can't get root permissions. Joey Kim's root checker says its not, and if I keep checking it then says it is, but can't get root in titanium. This was a very clean install. Any ideas?
Sent from my SPH-L710 using XDA Free mobile app
Is there a way to kill recent apps in one fell swoop?
Sent from my SPH-L710