So i just received the unlock code from at&t and id like to unlock the phone. but i dont have a non att sim. reason being, im going to try and get rid of the device and would like it unlocked prior. that way everything is done and they can just stick in there sim and go.
ive tried the few codes att gave me and no go.
all else fails i will just print out the text where at&t texted me the code. just would like it done before.
thanks in advance!!
You need a SIM from a different carrier to use that method. Also, check out this thread:
http://forum.xda-developers.com/showthread.php?t=2033225
Related
Hey guys,
I recently called T-Mobile and asked for an unlock code for my Dash, but when I received it I got my friends SIM card to try and it said the code was incorrect. I typed i *#06# on my phone and the IMEI matches the one I gave them, so does anyone know what the problem is? I recently installed Kavana's 6.1 ROM, so would that be a reason why? Thanks!
MKDaMan1818 said:
Hey guys,
I recently called T-Mobile and asked for an unlock code for my Dash, but when I received it I got my friends SIM card to try and it said the code was incorrect. I typed i *#06# on my phone and the IMEI matches the one I gave them, so does anyone know what the problem is? I recently installed Kavana's 6.1 ROM, so would that be a reason why? Thanks!
Click to expand...
Click to collapse
The 4-digit PIN code on a SIM card is something different to a SIM lock - which code are you talking about?
I'm talking about an 8-digit unlock code I got from T-Mobile. I borrowed my friend's SIM (which is a Cingular SIM) so I could test to see if the unlock code worked, but it didn't.
MKDaMan1818 said:
I'm talking about an 8-digit unlock code I got from T-Mobile. I borrowed my friend's SIM (which is a Cingular SIM) so I could test to see if the unlock code worked, but it didn't.
Click to expand...
Click to collapse
The unlock code sent from T-Mobile should've worked... The only thing I could recommend would be to double-check the code they sent you. Make sure it's the same one you're entering. You said that the IMEI that pulled up after entering *#06# is the same as the one you first gave them. That should eliminate the IMEI as a potential problem.
I ran into this when I unlocked mine... What I ended up doing was rebooting, entering in the code with My T-Mobile SIM in, then switching to an non T-Mobile SIM after the unlock to make sure it was unlocked.. it was.
Bupahs said:
I ran into this when I unlocked mine... What I ended up doing was rebooting, entering in the code with My T-Mobile SIM in, then switching to an non T-Mobile SIM after the unlock to make sure it was unlocked.. it was.
Click to expand...
Click to collapse
How do you enter the unlock code while using the T-Mobile SIM??? I always knew the phone to need a SIM of a different carrier.
Yeah I wanna know that too... I really want this thing unlocked! I appreciate all the help.
I should have been more clear. Reboot the device with the other providers SIM, the simlock dialog should kickin, then before you enter in the code take that SIM out and put yours in, enter the code then switch the cards again.. Thats how I got mine to work.
I used a Nextel SIM if it matters.
I've also heard that there has been success with a program called DASHv2Unlock, it forces the device into the simunlock mode without a forgien SIM in it. I was going to hunt it down but my method ended up working in the end
I was trying to change the theme on my shadow to shadow sliding panels.zip.However was promoted to load celecmd on my storage card and run the cmd. I don't know how to proceed from there cos i am not familiar with the cmds.Pls can somebody help me with this thing by outlining the cmd on this postp.i will appreciate the efforts from some one.
hey guys.. i bought valid unlck code for my imei for my device..but directions i got to do the unlock were very vague...i inserted a working non accepted at and t sim...but cant get prompt to enter unlock code...ive tried everything...can anybody help me?/// ive got sgs2 t989...anybody have tips to get it to say "enter sim unlock code?"...im dying to unlock...im currently running on tmobile MONTHLY 4g...id love to switch if i ever need to to AT+T or simply mobile....but cant seem to get it to promptfor the code...is there anyway to do it without using somebody elses non working activated sim?...im ertain my unlock code is good...just cant get to where i enter it...one time i think i did...it just says no mobile network...any help is GREATLY appreciated..thanks!!!
You're gonna need another sim to do it.
used good att sim it did nothing
i used my brothers att sim straight outta his phone...it did nothing...??
I have a European I9100 and a t-mob T989 (both gs2) and swapped the at&t and t-mob Sims they both phones worked. However the network features were non existent.
I got an unlock code from Tmo and borrowed a AT&T SIM from my friend. She doesn't have internet, and I put in the unlock code in and it was unsuccessful. Then, when I got home, I tried using another AT&T SIM, but this one is not active. When I put it in and rebooted, and there was no prompt to unlock. Am I doing anything wrong? Or what is the proper way to do it?
Oh yeah, I pulled the battery when I changed SIMs.
Does it matter if you are stock ROM or a custom? Mine worked on stock just fine, never tried it any other way though.. Maybe a factory restore? It shouldn't matter if the non-carrier SIM is active or not either..
Im on Jugg 5.0....
Should come up as it detects the different carrier. Try making a call on the ATT Sim. You might already be unlocked for some reason.
Hi.
I am unsure if my phone is unlocked and can proceed with porting my number over to Metro PCS. Please help me with advice how to proceed. I decided to move my service to Metro PCS since they are now a Tmobile company and after lots of research, I found that I can use my current phone/software as long as it was unlocked. I recently purchased my Galaxy s4 second hand and assumed it was not unlocked. I had immediately rooted it and flashed a new rom (Insane Kitkat 4.4.4). The phone has been working well. I already have requested and have my unlock code from Tmobile.
When I went to the Metro PCS store to port over my number, the phone did not request an unlock code when inserting their Metro PCS sim card (not activated). They said that my phone may already be unlocked or that it may not need to be unlocked since Metro is now owned by T-mobile. They stated that it may work if they go through the entire registration process, port over my number and activate it but that it would be a gamble. If it did not work, then I would not be able to go back and reactivate my sim immediately with Tmobile since it would then be in deactivated status with them.
I tried to find out if it is already unlocked by *#7465625# but my phone will not run this or any other USSD codes to verify. I keep getting errors when trying any USSD codes. A message says 'USSD code running' then "unable to process request".
A friend of mine has an activated Galaxy S4 on Metro PCS and I tried inserting her sim card to prompt for the unlock code but my GS4 just booted normally then showed 'not registered on network'. It did, however, have cellular signal bars. When I inserted my Tmobile sim into her GS4 it did ask for the unlock code normally.
I am at a loss now..
funny, I like to know if there is a way to check carrier unlock status for simcard without having to put a simcard in.
T-Mobile phones work with metropcs without the need to unlock
Could the custom rom be suspect?
Maybe need a stock rom to get carriers sorted out, then go to custom roms.
Pp.
serio22 said:
T-Mobile phones work with metropcs without the need to unlock
Click to expand...
Click to collapse
I ended up contacting Tmobile and they stated that the phone showed unlocked status already but I think you are correct. I wasn't aware they could tell me this. It was very fast and super easy to find out.
I have the phone working great on Metro PCS now. USSD codes still failing though...
I called and got my phone's unlock codes (domestic) however Sprint declined to provide how to unlock instructions. told me to go to my future carrier and give them the unlock code.
I called T-Mobile current provider and they told me... no Sprint can unlock and TMo, doesn't know how.
so I am stuck with legitimate Sprint unlock codes... and no idea how to use them.
Someone knows how this works here or it's better off just flash customs rom and unlock XDA way?
Thanks,
When you insert another carrier's SIM (in this case, T-Mob) it should ask for the code, then you just enter it.
Custom ROM isn't going to help you unlock the SIM, nor is there a working "hack" to do so without a code.
Thanks for your reply,
I've tried ATT, TMO sim and the phone does not ask for sim unlock code... it just says contact customer care.
or if someone knows how to get the phone to ask me for SIM/UICC unlock code... some hot keys to press, that can help too since I have the codes from Sprint.
**i am also reading about Sprint Sim unlock on One M8, so complicated!!!**
If you talking about the following mods, they are for unlocking the bands, which AFAIK is not the same as SIM (subsidy) unlock:
http://forum.xda-developers.com/htc-one-m8/general/unlock-bands-qualcomm-device-phone-t2880239
http://forum.xda-developers.com/htc-one-m8/general/how-to-convert-cdma-m8-sprint-vzw-gsm-t3303812
yeah, can't find a way to unlock sim to use w/ T-mo ATT. strange... I have the codes from Sprint and no one's done it? good thing I got HTC 10 factory unlocked this time no such problem later on