I have a SaskTel Samsung Galaxy S3 (SGH-I747M, baseband version I747MVLLE8) that is locked, and I want to unlock it. But when I insert a foreign SIM (from AT&T) I get no prompt for an unlock code. Instead it just says "No SIM card. Emergency calls only." I've contacted several of the online unlock code suppliers and they say without this prompt I can't unlock the phone. I've also tried to enter variations of the *7465625* code, but they do nothing at all. SaskTel says they don't provide unlock code. This despite the fact that I purchased the phone outright, and have no contract with them. Am I totally hooped, or is there some way I can get this phone unlocked?
ddice said:
I have a SaskTel Samsung Galaxy S3 (SGH-I747M, baseband version I747MVLLE8) that is locked, and I want to unlock it. But when I insert a foreign SIM (from AT&T) I get no prompt for an unlock code. Instead it just says "No SIM card. Emergency calls only." I've contacted several of the online unlock code suppliers and they say without this prompt I can't unlock the phone. I've also tried to enter variations of the *7465625* code, but they do nothing at all. SaskTel says they don't provide unlock code. This despite the fact that I purchased the phone outright, and have no contract with them. Am I totally hooped, or is there some way I can get this phone unlocked?
Click to expand...
Click to collapse
try another SIM, maybe the one you're using is borked.
Try this
#7465625*638*# (Insert Network Lock Keycode)
Sent from my SGH-I747M using xda app-developers app
cue_32 said:
Try this
#7465625*638*# (Insert Network Lock Keycode)
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
I've already tried that, the phone doesn't respond to this keystroke sequence.
dLo GSR said:
try another SIM, maybe the one you're using is borked.
Click to expand...
Click to collapse
Possible, but I doubt it, since it works just fine in another phone. In any case I don't have another one to try.
Misread
#7465625*638*UNLOCKCODE#
I noticed in an earlier post, the place of the unlock code was after the #, it should be before. On the right track though. Probably just a typo.
unless you already tried that.
lamsik said:
#7465625*638*UNLOCKCODE#
I noticed in an earlier post, the place of the unlock code was after the #, it should be before. On the right track though. Probably just a typo.
unless you already tried that.
Click to expand...
Click to collapse
That and probably every variation of it I can think of! I am wondering though, is this code internal only to the phone, or does it go to the cellular network? When I do type it, it does nothing, though if I send it I get an "Invalid USSD" message returned from the network.
lamsik said:
#7465625*638*UNLOCKCODE#
I noticed in an earlier post, the place of the unlock code was after the #, it should be before. On the right track though. Probably just a typo.
unless you already tried that.
Click to expand...
Click to collapse
this code doesn't work on the LTE variants of the SGS3. most of the multi-stage codes (####*###) don't work, you just end up with an error.
Correct as stated. Additionally, if you have a foreign micro sim, and you are not on a stock ROM, the unlock screen prompt will not show. I was running AOKP, and could not get the prompt to show, so I flashed back to stock, unlocked phone, then flashed back to AOKP, bc TW sucks!
Sent from my SAMSUNG-SGH-I747 using xda premium
Gerbowski said:
Correct as stated. Additionally, if you have a foreign micro sim, and you are not on a stock ROM, the unlock screen prompt will not show. I was running AOKP, and could not get the prompt to show, so I flashed back to stock, unlocked phone, then flashed back to AOKP, bc TW sucks!
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
This is what I was starting to suspect. Can you refer me to a good, really clear step by step procedure to do this? I've never done this with a phone, and since I live in a small town, I doubt I can find anyone to help me here. So a step by step would be nice. Thanks.
ddice said:
This is what I was starting to suspect. Can you refer me to a good, really clear step by step procedure to do this? I've never done this with a phone, and since I live in a small town, I doubt I can find anyone to help me here. So a step by step would be nice. Thanks.
Click to expand...
Click to collapse
are you on a stock ROM?
i have a i747M and unlocked it with the at&t micro sim, so i know it works,
did u cut ur at&t sim down to size ? maybe u did it wrong and it wont recognize, or ur sim slot is ****ed up ....
ur best bet right now is to try another micro sim
Ok, I've now got my phone rooted. Can someone suggest how I can get the ROM set so that it will allow me to enter the unlock code when I insert a foreign SIM.
There's a 3rd potential method that hasn't been mentioned on here that we see working for most Samsung handsets. In fact, for some Samsung handsets (usually older ones) it is the only unlocking method that will work.
It is:
1. Turn on the phone with a non accepted or accepted SIM card inserted
2. Type #0111*CODE# replacing CODE with your network unlock code
However, if your service provider lock is active, then you'll need to use the code #0133*CODE# instead.
All unlocking methods (once you have the unlock code) are available here: http://www.mobileunlocked.co.uk/samsung-instructions.asp
Hope that helps.
Did you manage to unlock?
I'm facing the exact same issue. My S3 doesn't show the network unlock prompt when I insert a foreign SIM. Mine is locked to AT&T. It's also SGH-I747 model
You could try and unlock your phone as per this thread:
http://forum.xda-developers.com/showthread.php?t=2033225
Then try the SIM card after the phone is unlocked.
Oh, I believe this only works on Stock ROMS.
Tybalt said:
You could try and unlock your phone as per this thread:
http://forum.xda-developers.com/showthread.php?t=2033225
Then try the SIM card after the phone is unlocked.
Oh, I believe this only works on Stock ROMS.
Click to expand...
Click to collapse
Follow the link Tybalt quoted, you will unlock your phone and the sim won't ask for an unlock code because well, it's unlocked.... Follow the instructions, you need to be on JB 4.11 for this to work, some have had success on custom roms but not many....you don't need to root to do this and make sure when you see the success code you have 40 at the end not 30... i did this a couple times... 30 I think basically means you have locked it again ... and in the instructions when it says wait 30 or 60 seconds... you really do have to wait.. don't be impatient....it's a huge thread with many many successes.....
Samsung Galaxy S3
I have the same issue but I have a sgh-i747 Samsung galaxy S3 i brought it to koodo and was told it was a compatible phone with the company when unlocked. The problem/question i have is When i insert my new simcard the screen will not display any prompt to input a unlock code. It just says emergency calls only or unregistered sim. I inserted my sim card into another s3 same model, software versions, different provider, and the phone asked for the unlock code right when powered on. So i tried and flashed a new firmware but its doing the same thing.
I called koodo and they gave me instructions to create a new apn of Koodo SP it did not make my phone prompt me for an unlock code.
When i send an email to any website about unlocking my phone they advice me not to purchase there product if my phones not prompting me for a unlock code that will it more then likely not work.
I've seen methods online of using these to input an unlock code "#0111*UNLOCKCODE#" or "#7465625*638*UNLOCKCODE#" but when i tell the unlock website this information this still tell me not to purchase there product and i mean many numerous websites. I do not want to buy an unlock code only to try to input it with these methods and have it not work. Which i highly dought it would because the normal 7465625 command doesnt work either.
I also tried this factory unlock and it did nothing
PLEASE HELP!?!?
mobileunlocked said:
There's a 3rd potential method that hasn't been mentioned on here that we see working for most Samsung handsets. In fact, for some Samsung handsets (usually older ones) it is the only unlocking method that will work.
It is:
1. Turn on the phone with a non accepted or accepted SIM card inserted
2. Type #0111*CODE# replacing CODE with your network unlock code[/URL]
Hope that helps.
Click to expand...
Click to collapse
Thank you so much for this!
Whenever I typed any variation of the #7465625 code I would get the "emergency calls only" message. #0111*CODE# did the trick!
The provider didn't even know this, the best they could come up with after numerous calls to their hotline is that the phone was broken and/or that the SIM card was badly inserted, thus I should mail them the phone to the other side of the country for unlocking. Would they even have known how to do it over there?
My grandma says thanks!
So i just received the unlock code from at&t and id like to unlock the phone. but i dont have a non att sim. reason being, im going to try and get rid of the device and would like it unlocked prior. that way everything is done and they can just stick in there sim and go.
ive tried the few codes att gave me and no go.
all else fails i will just print out the text where at&t texted me the code. just would like it done before.
thanks in advance!!
You need a SIM from a different carrier to use that method. Also, check out this thread:
http://forum.xda-developers.com/showthread.php?t=2033225
I'm trying to unlock my phone, I bought used on ebay, I found found a thread here that shows you how to unlock, but can't even do the first step. when I install a different sim card, I don't get the message Unlock, the phone reads the sim as a non support sim.
the sim I'm putting in the phone doesnt have service on it, Is this the reason the unlock message doesn't come up?
Please Help
Maybe your phone is already unlocked
Sent from my SAMSUNG-SGH-T989
Not sure
cricketAC said:
Maybe your phone is already unlocked
Sent from my SAMSUNG-SGH-T989
Click to expand...
Click to collapse
I put a metro pcs sim that has service on it, but when I try to make a call, it say, not register to network, and or mobile network disconnected? Aso also tried to put the apn setting, but when I try to save the apn setting, they disappear??
Anyone have any idea?
Thanks for the reply
you can use free unlock from general http://forum.xda-developers.com/showthread.php?t=2024514
but of course you have to do it from uvkl1. but--you can do a nandroid, and after you unlock it, restore your backup! it will stay unlocked
juna1103 said:
I put a metro pcs sim that has service on it, but when I try to make a call, it say, not register to network, and or mobile network disconnected? Aso also tried to put the apn setting, but when I try to save the apn setting, they disappear??
Anyone have any idea?
Thanks for the reply
Click to expand...
Click to collapse
Seems your phone's ROM/Radio mismatched or not for MetroPCS. This exactly happened to my phone also, until I flashed a new radio for my rom(I am using TMobile, flashed new TMobile ROM but not new Radio. Then it had the problems as you have now).
New sim fixed
cr2069 said:
Seems your phone's ROM/Radio mismatched or not for MetroPCS. This exactly happened to my phone also, until I flashed a new radio for my rom(I am using TMobile, flashed new TMobile ROM but not new Radio. Then it had the problems as you have now).
Click to expand...
Click to collapse
'' Thanks for the reply ''
The sim card I was putting in the phone was already register to a different phone.. I had to put a new sim, not active yet, then register the new sim to my imei and it worked fine.. I bought the phone used from ebay and it was already unlocked..
Ok ill try and be brief regarding the issue im having...i bought a t mobile m8 off CL. Took it home unlocked the bootloader, rooted, and flashed viper rom. it wasnt until after I had done all this that I noticed the phone is actually s-off. Amyways, i got the phone for my wife to use on her metro pcs account. I found a site online and ordered the unlock code for it and received it 10 min later. I proceeded to put her metro sim in the phone expecting to be prompted to enter the unlock code but I never got the prompt. After that I spent the next 24 hours on the internet tryin to figure out wut to do. I wasn't sure if that meant that the phone is already unlocked or not and dont really know how to check that. I do know that when i put the metro sim in and set the proper apn i can't even get calls and text's to work. I get not signal of any kind, nothin. Nothing i tried produced any results. At this point I have gone back to bone stock kit kat, no root, and bootloader relocked. That didnt accomplish anything either. So basically Im wondering if anyone knows why Im not being prompted for the unlock code, if there is a way to check if the phone is unlocked other than putting a different sim in since we only have the metro one, and how to I get this phone activated and recognized on metro since I know ive put in the correct apn.
I tried to be brief but failed miserably. Any help at all would be phenomenal. Thank u!!
Hey I have my sim unlocked I did it using the hidden menu method I have used it on simple and more recently metro. I got a new Nexus so this is now my backup. The other day I put my girls tmo sim in and it worked fine but today I put my mother's metro sim in and it wouldn't get a signal. But it didn't say insert sim. So did I inadvertently relock my phone to tmo by putting a tmo sim in it?
Also I am on cm 12.1 and I don't have a PC to Odin back to stock so is there a way to unlock the sim without having to go back to stock?
No re lock is possible.
There's no way you can relock your phone , it doesn't work that way, once is unlocked stays forever.