Friend of mine broke his screen on his note 2 and I was wondering if I bought a dummy phone and took all the guts and put it in the dummy phone will it work or tske the screen and digitizer and replace it on the broken phone with theone from the dummy phone. Does the digitizer Eben work in the dummy phones?
Sent from my SGH-T889 using Tapatalk 4 Beta
By dummy phone like the one in display at cell stores that don't work? I don't think they even use real glass for the screen. If you want to replace screen, go in ebay or craigslist and look for a blacklisted or broken note 2
Sent from my SGH-T889 using xda app-developers app
I just repaired mine. I bought the whole display assembly and backing plate for $200 off ebay. The only hard part was taking off the back housing. After removing all the screws and going around the inside of the chrome border with a guitar pick, there is a pastic clip at the top of the battery tray and you need to separate the housing from the speaker assembly before the housing comes off. The unnerving parts are removing the glued down ribbon cables for the vibrator motor and the power button. Use a pastic knife or the dull side of an exacto and slowly and patiently work the ribbon cables free. On a 10 scale where 10 is most difficult, I rate the job a 6 or 7.
The Youtube disassembly videos help a lot.
Doesnt Samsung charge 200 for screen fix including shipping and handling? Lolll you must like to live dangerously
Sent from my SGH-T889 using xda app-developers app
Related
Hi guys, I got my hands on a MT4G with a broken LCD.
First Q, is it worthy getting a replacement off cheapbay? What other options are there?
Second Q, is it hard to replace it? Is it possible to do it myself?
Thanks for your advise...
I haven't replaced an LCD myself but I am looking to replace a digitizer for my wife's phone.
Someone posted up this link for me in another thread I started.
http://www.ebay.com/itm/FULL-LCD-DI...984?pt=LH_DefaultDomain_0&hash=item2a12834fe0
This should take out the hard part of disassembling the digitizer from the lcd and reattaching and the adhesive itself.
It's the complete the front housing, digitizer AND LCD in one. Already assembled.
I haven't ordered it myself yet but I AM tempted. Especially after watching some of these disassembling videos.
Let me know what you decide and how it worked out.
Just PM me.
Thanks bro and good luck.
Thanks a lot, I will check it out, the adhesive part really has me in doubt.
I've replaced the LCD without the digitizer attached and you are both correct. It can be done but the finished product is not factory quality. I looked at the ebay part posted in the link and that would be the way to do it. Otherwise you have to use a hair dryer to heat the glue and its not fun.
If you are not familiar with taking electronics apart look for a video tutorial via google; I used one to take the MT4G apart. Also label the screws as they come out by drawing the phone on a piece of paper and placing the screw accordingly on the paper. Makes assembly much easier!
Hope you take on the challenge and good luck.
allenmehrer said:
I've replaced the LCD without the digitizer attached and you are both correct. It can be done but the finished product is not factory quality. I looked at the ebay part posted in the link and that would be the way to do it. Otherwise you have to use a hair dryer to heat the glue and its not fun.
If you are not familiar with taking electronics apart look for a video tutorial via google; I used one to take the MT4G apart. Also label the screws as they come out by drawing the phone on a piece of paper and placing the screw accordingly on the paper. Makes assembly much easier!
Hope you take on the challenge and good luck.
Click to expand...
Click to collapse
Yeah my only thing about ordering this complete assembly is that my wife's phone has the SO screen and I don't want to replace with an SH, which I'm sure that part is going to be. (99.99% sure)
Add to that, she doesn't even need a new LCD and the digitizer alone is just 25 bucks.
Decisions, decisions.
nguyendqh said:
Yeah my only thing about ordering this complete assembly is that my wife's phone has the SO screen and I don't want to replace with an SH, which I'm sure that part is going to be. (99.99% sure)
Add to that, she doesn't even need a new LCD and the digitizer alone is just 25 bucks.
Decisions, decisions.
Click to expand...
Click to collapse
I have to clean the dirt out between my digitizer and lcd! Can't tell you how annoying that is. Suppose someone could do a better job resealing it... It would be nice if a digitizer/lcd kit came with new adhesive.
http://www.papadigitals.com/advance...uch+4g&sgmid=aa6a532f59b343f82afc0aaa2d55c02d
I saw lcd screen and touch screen digitizer for HTC mytouch 4G there.
I've been taking electronics apart since I was 7 tears old. The MyTouch 4g finally beat me.
There are a lot of really delicate connectors that break easily. Be careful
dr_tracker said:
is it worthy getting a replacement off cheapbay? What other options are there? Second Q, is it hard to replace
Click to expand...
Click to collapse
You'd better to buy non-working phone (maybe from ebay) and make one from two phones. You should have the screwdriver. Easy to replace.
It is not really hard i saw a vid on youtube just search it up super easy actually
I bought a digitizer LCD already together for like 75 and it wasn't too bad to exchange and put this new one in but when I powered the phone the bottom left of the screen didn't work and it impossible to take it back out of the silver bezel without breaking it so I sent it back to get my money and lost the bezel. Its not too hard but be careful take your time and don't pull or yank anything.
Sent from my SGH-T959 using xda premium
I replaced my digitizer. I agree, there are many delicate connectors, but nothing to be afraid of. You should watch the YouTube video over and over. Also, be careful not to push on the bottom buttons while taking it apart. This was the most frustrating thing because they wouldn't sit properly when reassembled. I took it apart 5 times before I forgot to detach the power ribbon and ripped it off! There are motherboards available to fix this, but saving it for another day.
Sent from my HTC Glacier using Tapatalk
That's funny that's the same exact thing I did pulled the power ribbon right out so I just said screw it and just bought a new phone on eBay
Sent from my SGH-T959 using xda premium
I am working on replacing a samsung tmobile lcd screen. I bought a screen off ebay. As i got everything broke down i noticed the adhesive around the edge of the screen. Where can i find this die cut adhesive. I also need it for the flex cable light buttons at the bottom. As I removed the old screen I did not heat it hot enough. the buttons seperated and I do not want to waste a $180 lcd with bad buttons and no adhesive.
I wanna sell my phone you want that
Sent from my SGH-T989 using xda premium
What are you selling? Email me direct as I do not think this is where to post that. [email protected](dot)com
Ive never dropped a cellphone but today was that day. I had bought an invisible shield to put it on today when i got home. Right when i got home i put the phone in my pocket but it had it had hole. BAM. it dropped down my leg and hit the concrete face down. It shattered the digitizer but the lcd is intact. My question was, would i be able to buy a digitizer and change it without having to pay 180 for a new digitizer/lcd ? any help would be appreciated.
Sent from my SGH-T999 using xda app-developers app
I'm fairly sure I've read that the digitizer is fused with the screen.
Yeah there's no way going around it. They're glued together as one piece.
FFFFFFFUUUUUUUU dammit
Sent from my SGH-T999 using xda app-developers app
I spoke to some rep from samsung yesterday on my phone and they said it would be 179.99 to fix it. But my question is, do i have to include the lcd ? Because my lcd isnt broke and they sell the glass on ebay for 20 bucks. I would rather try and fix it myself and break it, THEN send it to samsung if i cant fix it instead of paying 180 bucks for just some glass since my lcd is not broken and have them rip me off because they will def reuse my lcd and win anyways.
kobe4rings said:
I spoke to some rep from samsung yesterday on my phone and they said it would be 179.99 to fix it. But my question is, do i have to include the lcd ? Because my lcd isnt broke and they sell the glass on ebay for 20 bucks. I would rather try and fix it myself and break it, THEN send it to samsung if i cant fix it instead of paying 180 bucks for just some glass since my lcd is not broken and have them rip me off because they will def reuse my lcd and win anyways.
Click to expand...
Click to collapse
It's been answered.. if you want to do it yourself you're going to end up breaking your LCD and need to buy the part or send it to Samsung anyways. There is no way around it.
There is a video on YouTube with somebody changing only the glass. Check on YouTube so you will have an idea about how to do it and if you will be able.
Sent from my GT-I9300 using Tapatalk 2
I dont believe they are "fused" together. from my history in repairing phones, there is just a small sliver of double sided tape holding the digitizer to the LCD screen. and all you need to do is use a plastic seperating tool to slowly seperate the two. Also, use a good hot hair dryer to help melt away the adhesive. good luck!
Go to a hardware store and pick up a heat gun. Take the phone completely apart, take out all the electronics. Heat the screen evenly and slowly start pulling the screen up little by little while hitting it with the heat gun.
Take your time and don't rush. It can be done but it's not easy and can damage the LCD.
Sent from my SGH-T999 using Tapatalk 2
If you do this HEAT the **** out of the LCD and digitizer. It will be very hard to separate the two. Please take pictures and tell us you're approach to help other S3 users.
I had a long ass post written but now it's gone. boo.
anyways. Here's something to consider as to why you can't separate it. If you believe there's a way to get around it then good luck.
http://www.youtube.com/watch?v=es8gezSdKv4&feature=youtu.be
Argh, cracked the screen on my 6 week old note 2. everything is shattered around the back button but it all still works fine. My galaxy s2 survived the same fall several times, stupid fat note.
I'm basically stuck with replacing the screen and the digitiser for £180 right? Any UK recommendations? I'm worried its never going to line up the same as it does now
I dropped mine and its cracked in the top right, great phone, **** glass
Sent from my GT-N7100 using XDA Premium HD app
You can replace glass only ( 20-30$ on ebay ) . You will have too heat up the screen with hairdryer and remove peaces of cracked screen. Its a bit annoying job but nothing complicated. There is enough videos on youtube. After you carefully remove old glass from screen you can apply new glass you bought from ebay. Used to change cracked glasses on several phones and all of them still works perfectly.
Sent from my GT-N7100 using xda premium
Mine too . suddenly crack
Sent from my GT-N7100 using xda premium
Cracked mine too. But I already bought a new glass on ebay and changed it. Works as good as stock glass.
Video of changing procedure:
http://www.youtube.com/watch?v=W4Gx5fLy0NQ
http://www.youtube.com/watch?v=KV-80zTAfyc
Mine dropped from two feet and hairline cracked across the whole screen. I bought the full assembly LCD/digitizer. Did the repair per LE55ONS. AOK now. afterwards, I tried to pry apart the digitizer glass. In my Note II it is bonded with transparent gum covering the entire LCD. No way to replace only the digitizer on my version of the Note II
Why do you keep reposting your comments about your dropped from a height...
One post is enough.
Annoying to keep reading your copy and paste spam messages
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Hey I just recently broke my screen and I bought my phone last july. Its not completely broken but its shattered most of the screen and its incredibly annoying. Is there anyway I could get a new phone or get a cheap screen replacement within 30-50$ range? Or should I just go ahead and get a new phone?
Sent from my SGH-I747 using xda premium
Tyler.Boston1 said:
Hey I just recently broke my screen and I bought my phone last july. Its not completely broken but its shattered most of the screen and its incredibly annoying. Is there anyway I could get a new phone or get a cheap screen replacement within 30-50$ range? Or should I just go ahead and get a new phone?
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
If the digitalizer isn't damaged, replacing the glass only is cheap and easy. Look it up :good:
BWolf56 said:
If the digitalizer isn't damaged, replacing the glass only is cheap and easy. Look it up :good:
Click to expand...
Click to collapse
How would I tell if the digitilizer is broken? It may look just like the glass is broken. If I didn't have my screen protector on I'm pretty sure it would fall apart
Sent from my SGH-I747 using xda premium
Tyler.Boston1 said:
How would I tell if the digitilizer is broken? It may look just like the glass is broken. If I didn't have my screen protector on I'm pretty sure it would fall apart
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
If the screen usable? Any color/light bleed? Or color distortion/fading?
BWolf56 said:
If the screen usable? Any color/light bleed? Or color distortion/fading?
Click to expand...
Click to collapse
Oh ok well then its still working
Sent from my SGH-I747 using xda premium
Tyler.Boston1 said:
Oh ok well then its still working
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Check out this thread for replacing your screen
http://forum.xda-developers.com/showthread.php?t=1945494
I highly recommend against trying to replace just the glass. That is what I tried to do, but the LCD is glued to the digitizer which is glued to the glass. I didn't use enough heat and though I got through the edge tape holding the glass to the frame, I shattered the digitizer and LCD as well as busted through the menu buttons.
If you think you can do it, go for it. Not real tool intensive, but there will be lots of heat and the success rate is probably 50/50.
The next step from that is to replace the whole LCD/DIGITIZER/GLASS. But that will set you back around $200. Same process, but you pretty much scrape the glass, digitizer and LCD from the metal frame. Lots of effort, lots of time, and little pieces of glass flying everywhere.
For about the same price, get the FRAME/LCD/DIGITIZER/GLASS asssembly. It only requires removing a few screws, unhooking a couple of cables, and replacing the hole front end. It can be done with care in about 15 minutes.
If you do that, be sure you get the right model number. If you are on AT&T in the US, you'll need the i747. The i9300 may come up a few bucks less, but it's not compatible. Color doesn't matter - you can change now, if you want.
The biggest disadvantage of removing the glass only is the risk of getting dust inbetween the LCD and the glass front. With the other two methods, the LCD/DIGITIZER/GLASS are already fused together. However, if you pull it off, no one will ever know you messed with it, and the warranty cheat won't be tampered with as it will be with a frame replacement.
According to the other post, you are still 13 months from an upgrade. That means around $450 to replace your S3 and $630 if you want to go the S4. For less than half that, you can get the frame replaced. I might even suggest that once you replace the frame, you spend that $10 to replace the glass and try it without any fear of consequences on the one you remove. If you do it well, you might could sell that assembly for $150-$200.
Good luck!
i9300 screen (no frame) will fit i747 frame
can you advise if a i9300 screen (no frame) will fit i747 frame? Mine is 747, I can see lots of posts on Ebay for screens with both 9300 and 747 compatible. Want to make sure before order.
k2lc said:
can you advise if a i9300 screen (no frame) will fit i747 frame? Mine is 747, I can see lots of posts on Ebay for screens with both 9300 and 747 compatible. Want to make sure before order.
Click to expand...
Click to collapse
Lcd, digitizer, and glass are all identical except color. Once you see the word "frame", the model matters.
I just recently did this successfully. The key is a good source of heat and patience. I used a heat gun and it took me about thirty minutes to do. There are screens you can order that come with the little tools to use. Start heating it slowly and use the tools to take the glass off. Heat it until its relatively easy to get the glass off but do not over heat it! Keep going until all the glass is off. Once its off, apply some sticky tape (or you can use the tape that was already on the phone if you don't destroy it) and it will be good to go. Make sure that you take the protective paper off the glass you ordered.
Should you have any issues feel free to PM me.
Sent from my SAMSUNG-SGH-I747 using xda premium