Hello guys.. I am not new to the kindle fire 1st generation... however this time its different.
I went from ICS back to stock... but it bricked in the process. I tried different things in the KFU and the KF unbrick utility.
no luck.. PC sees the KF and it installed the drivers. but KFU doesnt see it at all. I did instal the drivers that came with the KFU.
any ideas would be great. thanks
All little more specific instead of "it just bricked" did you notice everything different? Still have FFF? Try to see it in fast boot?
sometimes in very cases, KFU will say that the device is offline but in fact if you try to do one of the options, it will end up working.
and yes, a little more info would be helpful
Just stuck at the KF stock logo... i cant get it into fastboot. (I have next to 0 xp with adb, i usually use kfu) I have restored my kindle to stock before... and bricked it many times. But everything that worked for me before doesnt anymore. I suspect it might be a driver issue. (Being i am using a different PC than last time)
Sent from my MZ609 using xda app-developers app
fiddlefaddle said:
Just stuck at the KF stock logo... i cant get it into fastboot. (I have next to 0 xp with adb, i usually use kfu) I have restored my kindle to stock before... and bricked it many times. But everything that worked for me before doesnt anymore. I suspect it might be a driver issue. (Being i am using a different PC than last time)
Sent from my MZ609 using xda app-developers app
Click to expand...
Click to collapse
which KF logo, blue one or the orange one?
fiddlefaddle said:
Just stuck at the KF stock logo... i cant get it into fastboot. (I have next to 0 xp with adb, i usually use kfu) I have restored my kindle to stock before... and bricked it many times. But everything that worked for me before doesnt anymore. I suspect it might be a driver issue. (Being i am using a different PC than last time)
Sent from my MZ609 using xda app-developers app
Click to expand...
Click to collapse
Plug yout kindle into your computer. And try going into command prompt and use 'cd' to get to Where ever/KindleFire Utility/tools and then use
"Fast boot devices" and see if you see your kindle
tobiascuypers said:
Plug yout kindle into your computer. And try going into command prompt and use 'cd' to get to Where ever/KindleFire Utility/tools and then use
"Fast boot devices" and see if you see your kindle
Click to expand...
Click to collapse
Sent from my MZ609 using xda app-developers app
I know this is a noob question can you give me the lines needed? I know how start comand prompt.. but thats about it.. thanks for fast answers guys
Ok So i got a memory flash and CDed to the'tools' folder.. no errors when i put in fastboot devices. What next?
Edit:
It is at the orange logo..
Sent from my MZ609 using xda app-developers app
fiddlefaddle said:
Ok So i got a memory flash and CDed to the'tools' folder.. no errors when i put in fastboot devices. What next?
Edit:
It is at the orange logo..
Sent from my MZ609 using xda app-developers app
Click to expand...
Click to collapse
Does your kindle show up?
Sent from my Kindle Fire running CM10.1/SGT7
goldflame09 said:
Does your kindle show up?
Sent from my Kindle Fire running CM10.1/SGT7
Click to expand...
Click to collapse
No.. nothing shows up. It just goes to the next command line
Edit:
Oh and my KF shows up as android phone in my PC management.
Sent from my MZ609 using xda app-developers app
fiddlefaddle said:
No.. nothing shows up. It just goes to the next command line
Edit:
Oh and my KF shows up as android phone in my PC management.
Sent from my MZ609 using xda app-developers app
Click to expand...
Click to collapse
OK so try this
Open kfu and it will most likely say offline. Make sure your kindle is plugged in and on
Run whatever option # it is to install fff and twrp and let me know what happens
Sent from my Kindle Fire running CM10.1/SGT7
Good news.. i was messing around with my drivers.. i used to be a KF expert lol... i got KFU to see the kindle
Sent from my MZ609 using xda app-developers app
Error in installing twrp or fff...
-exec '/system/bin/sh' failed: no such file or directory -
It is having trouble getting into fastboot... idk why
Edit 2...
Kindle fire unbrick utility is giving the same error
Sent from my MZ609 using xda app-developers app
is my kindle permanently bricked? anyone?
fiddlefaddle said:
is my kindle permanently bricked? anyone?
Click to expand...
Click to collapse
You need a factory cable fiddlefaddle.
Thepooch said:
You need a factory cable fiddlefaddle.
Click to expand...
Click to collapse
All i found on ebay is a cable from china.. that is what I would use?
Sent from my MZ609 using xda app-developers app
fiddlefaddle said:
All i found on ebay is a cable from china.. that is what I would use?
Sent from my MZ609 using xda app-developers app
Click to expand...
Click to collapse
post #9 fiddlefaddle http://forum.xda-developers.com/showthread.php?t=1392693
Hey guys quick update.. i got the fastboot cable and it worked first time... my kindle is now running gede ICS and everything works... thanks to all for helping me fix this issue
Sent from my MZ609 using xda app-developers app
Related
I used adb to install the u-boot and TWRP-blaze-2.0.0rc0.img ye got through to the / sdcard but my problem now is when I restart my kindle fire button and no lights no lights nor the Kindle Fire detected in the pc I can do and changed the boot or by older believe it happened so help me ..... Please can help me in spanish and english i in ubuntu linux now thank you
if its a kindle 2 then I believe it is permanently bricked. What happens when you connect it to the charger?
spekdro said:
I used adb to install the u-boot and TWRP-blaze-2.0.0rc0.img ye got through to the / sdcard but my problem now is when I restart my kindle fire button and no lights no lights nor the Kindle Fire detected in the pc I can do and changed the boot or by older believe it happened so help me ..... Please can help me in spanish and english i in ubuntu linux now thank you
Click to expand...
Click to collapse
How did you install TWRP and u-boot with adb? What commands did you use and like Thepooch said, what Kindle Fire do you have?
Is not chargin and noting happen the comand i not remember but now am working but the tablet no turn on and the botton no lighting but i use uboot pass to sdcard an de tpwr or someting .. help
Sent from my SPH-L710 using xda app-developers app
Thepooch said:
if its a kindle 2 then I believe it is permanently bricked. What happens when you connect it to the charger?
Click to expand...
Click to collapse
No not charging and the kindle fire is new but no turn on and not power on
Sent from my SPH-L710 using xda app-developers app
spekdro said:
No not charging and the kindle fire is new but no turn on and not power on
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Listen. The first and second generation Kindle Fires are vastly different in what you're allowed to do with them. So once again, for the third time, what Kindle Fire are you running?
Is a kindle fire them no have cam the os runing 10.1.3 version and i try to install twpr
Sent from my SPH-L710 using xda app-developers app
soupmagnet said:
Listen. The first and second generation Kindle Fires are vastly different in what you're allowed to do with them. So once again, for the third time, what Kindle Fire are you running?
Click to expand...
Click to collapse
the kindle fire I have is that left promera has no camera and has the button below oki enciender priblema is that and installed the uboot and tpwr and from running wl reboot command does not load anything no button light not do not charge anything
Sent from my SPH-L710 using xda app-developers app
spekdro said:
the kindle fire I have is that left promera has no camera and has the button below oki enciender priblema is that and installed the uboot and tpwr and from running wl reboot command does not load anything no button light not do not charge anything
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Unfortunately, you have bricked (broken) your device... perhaps permanently. None of the how-to guides for the original Kindle Fire will work on the Kindle Fire 2. Using them on the KF2 will almost certainly make them unbootable. You found this out the hard way.
There is currently no procedure to unbrick the KF2 in cases like yours. Flashing u-boot for the Kindle Fire onto the Kindle Fire 2 was the worst possible thing you could have done because the KF2 is unable to boot from it and there's no known way to replace it.
Sorry for the bad news. Live and learn.
but if I buy the usb factory think I can clear all
Sent from my SPH-L710 using xda app-developers app
kinfauns said:
Unfortunately, you have bricked (broken) your device... perhaps permanently. None of the how-to guides for the original Kindle Fire will work on the Kindle Fire 2. Using them on the KF2 will almost certainly make them unbootable. You found this out the hard way.
There is currently no procedure to unbrick the KF2 in cases like yours. Flashing u-boot for the Kindle Fire onto the Kindle Fire 2 was the worst possible thing you could have done because the KF2 is unable to boot from it and there's no known way to replace it.
Sorry for the bad news. Live and learn.
Click to expand...
Click to collapse
Hey i buy this one this is a kindle fire 1 or 2
http://pages.ebay.com/link/?nav=item.view&id=271067949003
Sent from my SPH-L710 using xda app-developers app
Sorry isnt of the picture but check the description and there is
Sent from my SPH-L710 using xda app-developers app
spekdro said:
but if I buy the usb factory think I can clear all
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
You are wrong. The factory cable will do nothing for you in this situation. The bootloader that your device came with was signed. Unless you are able replace it with the same signed bootloader, you will probably not get your device back. I sympathize with you. It is a tough lesson to learn but you should have been aware of the risks before you started getting into something you know nothing about.
The only suggestion I can give you (and it's probably a long shot) is to extract the bootloader from the software update downloaded from the Amazon Kindle Fire 2 website and flash it with fastboot. Since you flashed TWRP, you'll likely have to do the same for the original recovery as well.
Even then, I think it's highly unlikely you'll get your device working again.
---------- Post added at 02:14 PM ---------- Previous post was at 02:12 PM ----------
spekdro said:
Sorry isnt of the picture but check the description and there is
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
The original KF did not come in 8"
spekdro said:
but if I buy the usb factory think I can clear all
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
The bootloader handles fastboot and detects for the presence of a factory cable. You broke your bootloader by flashing a u-boot meant for a different device. Without a working bootloader, the factory cable does not help you.
Your only hope is to use usbboot to load a new bootloader over USB, but that requires a signed aboot binary. The chances of that getting leaked out of Amazon is probably near zero. Sorry. All you're going to get is bad news.
A factory cable will not work the damage you have done Is permanent untill a solution is found and at this point there`s no solution.
Hi,
I was attempting to install a custom ROM my Kindle Fire and was successful in rooting it, installing TWRP and installed a custom ROM, Simple CM9.
When the Kindle rebooted, the Simple CM9 loader appears, but then the system just hangs there. Now, when I do a reset but holding down the power button, the system boots up, but once again starts loading Simple CM9 which gets stuck in a few seconds.
I found some posts on the net, which say I would see a yellow triangle from TWRP but I do not see anything of this sort.
Can anyone help ?
You're still able to access TWRP, right?
Sent from my KFHD 8.9 using Tapatalk 2
soupmagnet said:
You're still able to access TWRP, right?
Sent from my KFHD 8.9 using Tapatalk 2
Click to expand...
Click to collapse
No I am not able to now. I did access it the first time when I installed the Simple CM9 ROM using it, but no clue how to get back to it now.
Also not able to detect the device using ADB.
Do you have the blue and white Kindle Fire logo?
Sent from my KFHD 8.9 using Tapatalk 2
soupmagnet said:
Do you have the blue and white Kindle Fire logo?
Sent from my KFHD 8.9 using Tapatalk 2
Click to expand...
Click to collapse
No, Its white and orange.
Can you send adb commands?
Sent from my KFHD 8.9 using Tapatalk 2
soupmagnet said:
Can you send and commands?
Sent from my KFHD 8.9 using Tapatalk 2
Click to expand...
Click to collapse
No I cannot. It is not recognized by the Kindle Fire utility.
You'll probably need a factory cable to get into fastboot.
Sent from my KFHD 8.9 using Tapatalk 2
Hello XDA-Developers,
This morning, my phone stopped working. I don't know why. I have a Huawei Ascend P6.
The following "symptoms" is all I could ascertain:
My phone still worked yesterday, in the evening my phone died. So I charged my phone during the whole night, after which it doesnt work anymore.
This morning, I pressed the power button, so the phone would start up again, after my phone died. First I see the logo of huawei, then it should be the normal phone menu, instead of this, I see an android logo, which is shining, the whole time. Like this but then in light blue with black background:
Ofcourse I tried to reboot the phone, by first turning it off. The strange thing is, it starts itself up automatically. All the time till the battery died.
Now my computer recognizes my phone, after using usb to plug my phone in the computer, as "Android" When clicking on "properties" it recognizes it as "linux file-cd gadget usb device"?
This is all I know, sorry for the bad English, I really need my phone to work again fast. D:
title
TItle is this, the webpage doesnt show the whole title:
My phone doesn't work anymore: How comes that my computer recognizes my phone, after using usb to plug my phone in the computer, as "linux file-cd gadget usb device"?
AFCA_Timon said:
TItle is this, the webpage doesnt show the whole title:
My phone doesn't work anymore: How comes that my computer recognizes my phone, after using usb to plug my phone in the computer, as "linux file-cd gadget usb device"?
Click to expand...
Click to collapse
Since it does establish a connection with the computer its probably not 100% dead yet. From what you say i think it goes into bootloader mode which means you can try using fastboot commands to get a reaction from the phone. If that doesnt work then im clueless.
Sent from my SM-G850F
tileeq said:
Since it does establish a connection with the computer its probably not 100% dead yet. From what you say i think it goes into bootloader mode which means you can try using fastboot commands to get a reaction from the phone. If that doesnt work then im clueless.
Sent from my SM-G850F
Click to expand...
Click to collapse
I have similar problem..
But I can go to Stock Recovery..
How can I make it work again?
Sent from my SM-G900F using XDA Free mobile app
noteandfound said:
I have similar problem..
But I can go to Stock Recovery..
How can I make it work again?
Sent from my SM-G900F using XDA Free mobile app
Click to expand...
Click to collapse
Try flashing a stick firmware through recovery. Put an uodate.app file in dload folder on your sdcard and see if it starts updating when you enter the recovery.
Sent from my P6-U06
tileeq said:
Try flashing a stick firmware through recovery. Put an uodate.app file in dload folder on your sdcard and see if it starts updating when you enter the recovery.
Sent from my P6-U06
Click to expand...
Click to collapse
Thanks bro..
Using this guide?
http://forum.xda-developers.com/showthread.php?p=57008427
Or what guide?
Im new to P6. Sorry
Sent from my SM-G900F using XDA Free mobile app
noteandfound said:
Thanks bro..
Using this guide?
http://forum.xda-developers.com/showthread.php?p=57008427
Or what guide?
Im new to P6. Sorry
Sent from my SM-G900F using XDA Free mobile app
Click to expand...
Click to collapse
Thats a guide to downgrade from kitkat to jellybean. If you had kitkat before you can use that if not just find a JB firmware from net ( i suggest that you get B132) and flash that.
Sent from my SM-G850F
tileeq said:
Thats a guide to downgrade from kitkat to jellybean. If you had kitkat before you can use that if not just find a JB firmware from net ( i suggest that you get B132) and flash that.
Sent from my SM-G850F
Click to expand...
Click to collapse
I have B119. Is it ok?
Sent from my SM-G900F using XDA Free mobile app
noteandfound said:
I have B119. Is it ok?
Sent from my SM-G900F using XDA Free mobile app
Click to expand...
Click to collapse
Sure why not.
Sent from my SM-G850F
I have rooted my kindle fire and installed play store but I was wondering how to bypass the "Continue to Amazon Appstore" when clicking on play store links.
I've tried using Titanium backup's Market Doctor, but that didn't help. I'm a noob and don't know where to start, so I could really need some help.
this is the forum for the kindle fire 1st gen.
you will get the best help if you post in the right forum.
select the forum for your device from here:
http://forum.xda-developers.com/kindle-fire/help/index-amazon-kindle-fire-t3205350
Thanks and sorry..
Everytime I run Install.bat, nothing is installed. Messages keep saying 'files not found'. they do exist in the Data folder. I looked at the .bat but cannot figure out where it is looking for the files. My WIN8.1 signed drivers were installed and my laptop recognized the Kindle Fire (6.4.4). Any ideas? Tnx
JonFoxJones said:
Everytime I run Install.bat, nothing is installed. Messages keep saying 'files not found'. they do exist in the Data folder. I looked at the .bat but cannot figure out where it is looking for the files. My WIN8.1 signed drivers were installed and my laptop recognized the Kindle Fire (6.4.4). Any ideas? Tnx
Click to expand...
Click to collapse
what install.bat?
Sent from my KFFOWI using Tapatalk
sd_shadow said:
what install.bat?
Sent from my KFFOWI using Tapatalk
Click to expand...
Click to collapse
The install.bat in saferoot.
JonFoxJones said:
The install.bat in saferoot.
Click to expand...
Click to collapse
why ask in this thread?
Sent from my KFFOWI using XDA Labs
sd_shadow said:
why ask in this thread?
Sent from my KFFOWI using XDA Labs
Click to expand...
Click to collapse
OK. Re-posting to what I hope is the correct thread:fingers-crossed:How To Root KF1 6.3.4
I bought a kindle fire second hand that had Android Jelly Bean 4.1.2 on it and i went to reset it back to the factory settings by downloading the newest Kindle software and following instructions online. It had TWRP as the loader on it and now when I use the KFU it will not let me change the boot mode (says it is unknown). No matter what I do the Kindle will not get out of the boot loop. Please help!!
BKizzle33 said:
I bought a kindle fire second hand that had Android Jelly Bean 4.1.2 on it and i went to reset it back to the factory settings by downloading the newest Kindle software and following instructions online. It had TWRP as the loader on it and now when I use the KFU it will not let me change the boot mode (says it is unknown). No matter what I do the Kindle will not get out of the boot loop. Please help!!
Click to expand...
Click to collapse
twrp is a custom Recovery
fff is a custom bootloader
stock firmware can only be installed using twrp 2.2.2.1 or older
what firmware version (filename) did you try installing?
KFU is dead
likely need a fastboot cable now
How to flash twrp and firefirefire with a Fastboot cable
Sent from my KFFOWI using XDA Labs
sd_shadow said:
twrp is a custom Recovery
fff is a custom bootloader
stock firmware can only be installed using twrp 2.2.2.1 or older
what firmware version (filename) did you try installing?
KFU is dead
likely need a fastboot cable now
How to flash twrp and firefirefire with a Fastboot cable
Sent from my KFFOWI using XDA Labs
Click to expand...
Click to collapse
I loaded Amazon Kindle Update 6.3.4 using the TeamWin loader. I ordered the fastboot/factory cable today and should have it by monday. KFU is no longer supported? Is there no other way around this issue using what I have? Thanks.
BKizzle33 said:
I loaded Amazon Kindle Update 6.3.4 using the TeamWin loader. I ordered the fastboot/factory cable today and should have it by monday. KFU is no longer supported? Is there no other way around this issue using what I have? Thanks.
Click to expand...
Click to collapse
installing stock is a little tricky
because it reinstalls stock recovery & bootloader, so no twrp or fff
you need to factory reset in twrp before rebooting
if doesn't boot to stock rom, you need a fastboot cable
Sent from my XT1080 using Tapatalk
sd_shadow said:
installing stock is a little tricky
because it reinstalls stock recovery & bootloader, so no twrp or fff
you need to factory reset in twrp before rebooting
if doesn't boot to stock rom, you need a fastboot cable
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
Thanks for the help. When I get the cable on Monday I am going to try the steps you sent in the post and see if that works. Have you seen the error I am talking about? Where it will startup with the normal Kindle Fire logo and then go into a loop with "android calendar not working, force close" then it reboots and on and on?
BKizzle33 said:
Thanks for the help. When I get the cable on Monday I am going to try the steps you sent in the post and see if that works. Have you seen the error I am talking about? Where it will startup with the normal Kindle Fire logo and then go into a loop with "android calendar not working, force close" then it reboots and on and on?
Click to expand...
Click to collapse
if you can root with kingroot or saferoot
you might be able to follow
[6.3.4][6.3.3] Flashing FFF and TWRP without Fastboot Cable with Video
then try a factory reset
Sent from my XT1080 using Tapatalk
sd_shadow said:
if you can root with kingroot or saferoot
you might be able to follow
[6.3.4][6.3.3] Flashing FFF and TWRP without Fastboot Cable with Video
then try a factory reset
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
Thank you so much for the help! I got the factory cable and was able to install the pre-rooted version. The only other question I have is how do i get Amazon Instant video to work? I have a Prime account and from what it looks like, when the rooted version is on there it knocks out the instant video. Any thoughts?
BKizzle33 said:
Thank you so much for the help! I got the factory cable and was able to install the pre-rooted version. The only other question I have is how do i get Amazon Instant video to work? I have a Prime account and from what it looks like, when the rooted version is on there it knocks out the instant video. Any thoughts?
Click to expand...
Click to collapse
don't know, root should not matter, but I may have removed something,
did you install the 6.3.3 or 6.3.4?
Sent from my XT1080 using XDA Labs
sd_shadow said:
don't know, root should not matter, but I may have removed something,
did you install the 6.3.3 or 6.3.4?
Sent from my XT1080 using XDA Labs
Click to expand...
Click to collapse
6.3.3
sd_shadow said:
don't know, root should not matter, but I may have removed something,
did you install the 6.3.3 or 6.3.4?
Sent from my XT1080 using XDA Labs
Click to expand...
Click to collapse
I flashed 6.3.4 on the Kindle Fire and if I have to do a restart for any reason, once it loads and recognizes my user name, it suddenly reboots itself? Any thoughts on why it would do that?
BKizzle33 said:
I flashed 6.3.4 on the Kindle Fire and if I have to do a restart for any reason, once it loads and recognizes my user name, it suddenly reboots itself? Any thoughts on why it would do that?
Click to expand...
Click to collapse
some times you have to factory reset
Sent from my XT1060 using XDA Labs