Related
Hey all can't post in the rom's thread so here will have to do hope someone can answer this.
Got the rom working fine. The issue is A.) I lose CMW
why? and is there a guide for installing cmw standalone without flashing a kernel?
B.) gapps don't appear even though i def flashed them as OP said to.
Permutations tried so far:
- OP verbatim
- OP + F10AOKP kernal as recommended in OP
Thanks to any and all
using cwm with an ics kernel has been causing bricks. It happened to me once already had the have best buy replace my phone. Most devs aren't packing cwm with ics kernels for the time being this may change but for now its safer this way. When I need to flash something I use mobile Odin to flash back to el26 then I wipe cache flash what I need then flash an aosp kernel : ) and boot
Sent from my SPH-D710 using xda premium
Irshin said:
using cwm with an ics kernel has been causing bricks.
Click to expand...
Click to collapse
Thanks for clearing that up for me! Also I figured out my gapps issue some trial and error led me to follow CM9's gapps link and that did the trick.
you lose your recovery because of two related reasons:
1) on this device (not sure if it applies to all samsung devices, though i think it does apply to most), kernel and recovery are packaged together and therefore always flashed at the same time. when you flash a kernel, you always lose whatever recovery you had before.
1.1) since you flashed aokp, which includes a kernel, you therefore lost your recovery because of reason 1. no big. next time you need to flash something over AOKP or make a nandroid, just odin el26 kernel which includes cwm (search for it, not gonna link it), and do your thing. just remember to reflash the ROM before rebooting cuz el26 is a gb kernel which wont work with aokp (because it's ICS).
Also you should read the first couple post in the thread....it explains what is what with the ROM and that it doesn't have cwm ...etc
Sent from my SPH-D710 using Tapatalk 2
Ive got this message in cwm when was restoring (jj's hybrid for locked bootloader): no app2sd partition found, any ideas?
Locked Bootloader Arc S.
When i want to format sd-ext --> same message.
Prince
Bump
Prince
That means that CWM didn't find a second partition in your SD card used by Link2SD.
Is it working fine, JJ ROM?
Im just wondering if i can flash it with this 'error'.
Prince
I presume jj's rom has app2ext built in, but it shouldn't affect the rom. But check on the rom thread.
sinkster©
I was asking, but no1 replied.
Prince
It will work. That "error" is just a check if a sd partition exists to make use of. Wont affect sysyem if missing.
Typed down from the sky with sexy LT15i
Thx then xd
Prince
hints that migh be helpful to prevent trouble when flashing custom roms & kernels
hi there,
i'm not entirely sure if this will help you but generally speaking i came made a few observations about the fact that some people, mostly repeatingly the same users, encounter problems with their custom roms and/or flashing them, while others don't, albeit they are using the same devices.
i myself use 3 different devices, all rooted and running on pac 4.3, always latest nightly, as there are GT-N7100 - GT-I9100 - Nexus 4
not to the point
a) other than most other users i usually clean cache and dalvik cache as well before and after flashing the new rom and/or new nightly
and never encountrer any problems except those which everybody, using the same rom and nightly encounters.
b) whenever i flash an totally different rom and/or upgrade and/or downgrade to another level of android os, i.e. from 4.2.2 to 4.3, i perform
a clean install, including not only a factory reset, but as well a format sd-card, format cache and format system etc., again i cannot proof
which of these steps make a or the differnce but however, i never have problems others than thosw which everyone has with a version.
c) when using cusome kernels and due to the fact that some roms come with a kernel included, as well as with a custom recovery included,
it is strongly recommended not to forget to flas the kernel again after each flashing the new rom. one good example ist dorimanx kernel
for GT-I9100 which will not boot into recovery and reluctantly boot at all after a new flash of a pac nightly without reflashing the kernel.
d) try to fix permissions on reboot instead of doing it from recovery. one reason is that not every recovery has this option and further i
found that when fixing permissions before the first boot after flashing a new rom, there might be bootloops, albeit i cannot explain exactly
why that should, but however, sometimes it's better to be on the safe sid.
e) try to run whether the lastes version of custom recovery for your device, and or the use the included custom recovery of the rom or the
kernel. this again is one thing that can help to avoid some unexpected and hard to explain bootproblems and/or fc's etc.
hope that i could give you some new ideas how to avoid trouble while using custom roms and other hacks
Pulkit_i21 said:
hi ...i need your help...i am also using xperia arc s (2.3.4), rooted. i tried to install ultimate HD 5 around 6-7 times from different ways, all instructions on internet i followed, in my arc but always it stuck on sony ericson logo and i need to flash it again and again....please help me..why i a, not able to install ultimate hd ..waiting for your reply thanks
Click to expand...
Click to collapse
You must use ICS kernel, either unlock bootloader and install custom ICS kernel, or first install/update to stock ICS and then follow the same method.
i already did 6 times
i already tried 6-7 time to install custom rom when it stuck on sony logo i flashed it with orignal stock rom and tried again but every times same problem arise. now i am not understanding where i missed
Someguyfromhell said:
You must use ICS kernel, either unlock bootloader and install custom ICS kernel, or first install/update to stock ICS and then follow the same method.
Click to expand...
Click to collapse
Pulkit_i21 said:
i already tried 6-7 time to install custom rom when it stuck on sony logo i flashed it with orignal stock rom and tried again but every times same problem arise. now i am not understanding where i missed
Click to expand...
Click to collapse
Kernel. You must use appropriate kernel!
Already tried
i already tried flashing kernel too.....and also in ultimate HD there are option of instaling with locked boot loader.................................i just want to install ultimate HD..........
Someguyfromhell said:
Kernel. You must use appropriate kernel!
Click to expand...
Click to collapse
Pulkit_i21 said:
i already tried flashing kernel too.....and also in ultimate HD there are option of instaling with locked boot loader.................................i just want to install ultimate HD..........
Click to expand...
Click to collapse
Did you install full ICS firmware with kernel prior installing Ultimate HD ROM?
yes
yes i did around 6 times after bootloot i goot in my androing so i flash 2.3.4 gingerbread ftf file again in it
Someguyfromhell said:
Did you install full ICS firmware with kernel prior installing Ultimate HD ROM?
Click to expand...
Click to collapse
Pulkit_i21 said:
yes i did around 6 times after bootloot i goot in my androing so i flash 2.3.4 gingerbread ftf file again in it
Click to expand...
Click to collapse
First install stock ICS firmware, Android 4.0.4 (4.1.B.0.587 or 4.1.B.0.431), and then install the custom ROM. Did you do it so? Can you write the file, which you used?
no..i flashed only base version 4.0.2.A
i always flash "LT18i_4.0.2.A.0.58(2.3.4)_HK" after every bootloop, i not tried to flash 4.1.B.587....few month before tried it to flash but i think it is not able to flash because of system partition is is less because of 4.0.2.................well benifit of installing upgraded rom "4.0.4 (4.1.B.0.587 or 4.1.B.0.431)" and are you sure after that i will able to install it..?
Someguyfromhell said:
First install stock ICS firmware, Android 4.0.4 (4.1.B.0.587 or 4.1.B.0.431), and then install the custom ROM. Did you do it so? Can you write the file, which you used?
Click to expand...
Click to collapse
Hey guys,
I'm new to the Xperia Arc development and need some help with installing a custom rom. I've done quite a bit of reading but still can't figure out what is wrong and why it's simply not working.
So from what I gathered the steps to ensure a successful flash are:
Firstly flash a stock rom via flashtool ie LT18i_4.1.B.0.587.ftf
flash LT18i_4.1.A.0.562_Kernel > root the device > flash back to LT15a_4.1.B.0.587_Kernel
Then now that the device is rooted, I need to install a recovery such as CWM via RecoverX
So, so far so good as I can access CWM, stock rom works fine as well
So then next step is to unlock the bootloader
pretty sure this worked, as when i tried to unlock it again, it said it failed as it was already unlocked
Now flash a custom kernel, in this case i flashed the 146 FXP CM kernel
This also seemed successful as I was presented with a custom splash screen
So then after custom kernel is installed I enter recovery, wipe the cache and reset factory settings, format the data system and cache as well as wiping the dalvik and battery stats.
After, I installed the custom rom zip file, in this case it was aokp_anzu-ota-eng.kxp_build5 and then google apps and then reboot.
So my problems begin here.
My phone seems to be stuck in the boot process (sometimes), on the "initiating swagger" splash screen and it goes crazy. I've tried flashing this rom with other kernels (fusion 3.9) and sometimes it actually loads up into the rom. But the rom is extremely laggy, applications freeze and close and the wifi never works
So my question is, is there any steps or procedures that I am missing, not doing right or in the correct order?
I don't think it's any hardware issues as wifi works in the stock rom, and it's fairly smooth and fluid.
Also, is there a better way to flash roms so that I don't need to do this entire process of flashing a stock rom, rooting, unlocking bootloader, installing recovery every time I want to flash a new rom? And when I flash a custom kernel first, then flash a custom rom that has a kernel inbuilt (cm10) does the custom rom's kernel replace the one i just flashed, reason for asking is that the instructions say to flash the custom kernels and then the roms, but yeh just hasn't been working for me so not really sure how to do what.
I'd really appreciated any help or insight!
Thanks
http://forum.xda-developers.com/showthread.php?p=18445331#post18445331
XperienceD said:
http://forum.xda-developers.com/showthread.php?p=18445331#post18445331
Click to expand...
Click to collapse
Thanks! I've read your guide (what I based my flashing on) and it seems consistent with what I have done, on the surface of it anyway. If you think I missed or overlooked something, would it be possible to point it out?
If your boot loader is unlocked it's as simple as this...
1. Flash kernel
2. Wipe cache etc
3. Install ROM
...I always reboot before installing anything else as I've found it can break the installation of the ROM.
XperienceD said:
If your boot loader is unlocked it's as simple as this...
1. Flash kernel
2. Wipe cache etc
3. Install ROM
...I always reboot before installing anything else as I've found it can break the installation of the ROM.
Click to expand...
Click to collapse
As ExpirienceD says,just one more thing flash kernel modules if you need to.
So:
1.Flash kernel
2.Full wipe data/cach...etc...
3.Flash ROM
4.Flash kernel modules
Sent from my LT15i using xda premium
So, I was relocking my HOX in order to get the OTA JB update from carrier (H3G) in order to use the new Viper ROM.
All went well and managed this. Got re rotted and installed CWM ans Super SU.
However, I read that before installing the JB Viper ROM it was important to do a full wipe. Using CWM i did this. Specifically I did the wipe data/factory reset, wipe cache partition, wipe dalvik cache and format system.
Now my phone is stuck on the white HTC screen. Please help.
Thanks
You formatted system, which basically wiped the rom. Reflash and don't format system.
Sent from something that's BETTER THAN YOURS
You should probably read what bricking your phone means.
Sent from my HTC One X
And don't forget to flash the boot.img file !
Thanks for the quick response and apologies for the basic and wrongly termed questions. Just panicking a little.
How do i get the ROM and boot.img on to the fone? Because it sticks at the white screen the pc doesn't seem to detect it.
Last time i used a stock RUU and followed that process. Will i be able to flash the new Viper ROM instead?
thanks
The boot.img is supposed to be flashed from the PC. To get the Rom into the phone you need to go back to clockworkmod, go into mounts and storage and press the mount usb thing
Edit - to flash the boot.img find a thread about fastboot. Don't worry you'll get there
To get the ROM on the phone boot into cwm and GOTO mounts & storage
Then mount USB storage
It should now be detected as a drive on your PC and you can copy the ROM back over
Sent from my HTC One X using xda app-developers app
Thanks. I did as you guys suggested and was able to install the Viper ROM (used the tweaked stock kernel as recommended in the download).
So have a ROM now but I have no service with my carrier and when I try to connect to wifi it says 'error'. Have I missed or done something wrong?
Cheers
columbo67 said:
Thanks. I did as you guys suggested and was able to install the Viper ROM (used the tweaked stock kernel as recommended in the download).
So have a ROM now but I have no service with my carrier and when I try to connect to wifi it says 'error'. Have I missed or done something wrong?
Cheers
Click to expand...
Click to collapse
While installing the rom, did you choose at the kernel question to keep the stock kernel and modules
Sent from my GT-P5110 using xda app-developers app
Mr Hofs said:
While installing the rom, did you choose at the kernel question to keep the stock kernel and modules
Sent from my GT-P5110 using xda app-developers app
Click to expand...
Click to collapse
Got it resolved. I had used the tweaked kernel and assumed that this was not standard, so when asked about which kernel i was using i said it wasn't the viper one.
So i went back to basics and used the kernel that came with the ROM zip and just flashed both. Working fine now. The only question is whether I could have used the tweaked kernel and answered yes to using the viper version?
Thanks for your help. Felt like I have learned a fair bit in the last 12 hours though!
Well if you flashed a different custom kernel you can answer that with the question so it won't load the stock modules but backs up the custom modules from the custom kernel. This way it won't mess up functionality.
When you use a boot.img without it proper modules it can mess up those things you experienced. Hope i make my self clear
Mr Hofs said:
Well if you flashed a different custom kernel you can answer that with the question so it won't load the stock modules but backs up the custom modules from the custom kernel. This way it won't mess up functionality.
When you use a boot.img without it proper modules it can mess up those things you experienced. Hope i make my self clear
Click to expand...
Click to collapse
Ye, perfectly. cheers
Looking at this thread, makes me realize that there are still a lot of polite helpful guys out there :thumbup:
Sent from my Bladed One X. Blade v5.0.0 is here. Based on RUU and with OTA.
Hello there,
I'm new to Android (got me note 2 three days ago) and I rooted the phone yesterday, I flashed cm ROM into the note, because It was as simple as an iPhone, and it was fast, but I lost some of the greatest features that note 2, offers which are the multiscreen and the S-Pen features, I have posted a help thread about that and they replied that I need a Touchwiz ROM, I went to my close friend Google and searched for Touchwiz rom(s) but there were way too many, can you recommend a good light one with nice interface and noob-friendly? I would really appreciate it.
With regards,
OverDub
Sent from my GT-N7100 using xda app-developers app
It's hard to say which is best. A twizz rom is a stock based rom. If you want a rom with lots of features I'd look at one of the note 3 based roms like ditto. If you want something light any rooted stock rom will do then you can use titanium backup to freeze or remove anything you don't use. If you want to increase battery life then check out apps like greenify and receiver stop. They help to stop rogue programs running in the background
Sent from my GT-P3110 using XDA Premium 4 mobile app
Thanks for your help, seems that dn3 is good but I have a question, I'm using a Cyanogenmod ROM, will upgrading from cm to dn3 cause me any problems?
Sent from my GT-N7100 using xda app-developers app
No there will be no problem at all. If you are already on a 4.3 bootloader you will be fine If you aren't you just need to flash either the wifi patch or devil kernel to get wifi. I am on the n7105 which is slightly different. If you follow any of Dr ketan's guides you will not go wrong. Airview pen window and quad screen multi window are all pretty cool features in dn3
Sent from my GT-N7105 using XDA Premium 4 mobile app
You can try Tiagra ROM, its supposed to be 4.3 Touchwiz ROM with the features of Note 3.
sawdoctor said:
No there will be no problem at all. If you are already on a 4.3 bootloader you will be fine If you aren't you just need to flash either the wifi patch or devil kernel to get wifi. I am on the n7105 which is slightly different. If you follow any of Dr ketan's guides you will not go wrong. Airview pen window and quad screen multi window are all pretty cool features in dn3
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you a bunch, I'm running a 4.3.1 jellybean CyanogenMod, im I going to need to flash a WiFi patch or a kernel ?
Sent from my GT-N7100 using xda app-developers app
Just do a full wipe (is a must and most advisable) when you jump from 1 rom to another.
If you are not sure which bootloader you are in now (noobproof in my opinion) :
1) try download all the files you need first, and put them all on the SD card (ROM, Wifi patch N7100 dr. ketan).
2) Full wipe (if you are on philz cwm, do a clean wipe to flash new rom), and flash new rom.
3) let it boot. Try the wifi, if it doesn't work, it means you are on the old bootloader, then you have to follow the wifi patch instructions (or flash devil kernel on my device N7105).
antique_sonic said:
Just do a full wipe (is a must and most advisable) when you jump from 1 rom to another.
If you are not sure which bootloader you are in now (noobproof in my opinion) :
1) try download all the files you need first, and put them all on the SD card (ROM, Wifi patch N7100 dr. ketan).
2) Full wipe (if you are on philz cwm, do a clean wipe to flash new rom), and flash new rom.
3) let it boot. Try the wifi, if it doesn't work, it means you are on the old bootloader, then you have to follow the wifi patch instructions (or flash devil kernel on my device N7105).
Click to expand...
Click to collapse
Thank you for the reply, I have the ROM manager app which is associated with CWM, it has the (install a ROM from SD card) option, and if u press it There are two checks which are (wipe data) and (wipe cache).
Is it safe to use the ROM manager way of installing a ROM ?
P.S: I used the ROM manager way yesterday to change ROMs from cm 10.2 to cm 10.2 nightly and it worked perfectly.
Sent from my GT-N7100 using xda app-developers app
OverDub said:
Thank you for the reply, I have the ROM manager app which is associated with CWM, it has the (install a ROM from SD card) option, and if u press it There are two checks which are (wipe data) and (wipe cache).
Is it safe to use the ROM manager way of installing a ROM ?
P.S: I used the ROM manager way yesterday to change ROMs from cm 10.2 to cm 10.2 nightly and it worked perfectly.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Better flash MJ5 bootloader than Wifi-patch. A lot of people reported problems without new bootloader. MJ5 is knox-free.
OverDub said:
Thank you for the reply, I have the ROM manager app which is associated with CWM, it has the (install a ROM from SD card) option, and if u press it There are two checks which are (wipe data) and (wipe cache).
Is it safe to use the ROM manager way of installing a ROM ?
P.S: I used the ROM manager way yesterday to change ROMs from cm 10.2 to cm 10.2 nightly and it worked perfectly.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
You can try what dalanik suggest for the bootloader.
as for the flashing of DN3, I would suggest u flash Philz CWM, or TWRP. I myself use Philz CWM (I always use his since Note1, and so far give me less headache in my personal opinion/experienced).
Anyway, CM10.2 to CM10.2 nightly are still the same base CM. When you want to jump into TW from CM, I would highy recommend to do a full wipe. And the full wipe is the best do from recovery.
I'm sorry, I have no idea on using ROM manager to flash ROM on Note device. I left it long time ago. Galaxy S1 is my last device to use ROM manager.
antique_sonic said:
You can try what dalanik suggest for the bootloader.
as for the flashing of DN3, I would suggest u flash Philz CWM, or TWRP. I myself use Philz CWM (I always use his since Note1, and so far give me less headache in my personal opinion/experienced).
Anyway, CM10.2 to CM10.2 nightly are still the same base CM. When you want to jump into TW from CM, I would highy recommend to do a full wipe. And the full wipe is the best do from recovery.
I'm sorry, I have no idea on using ROM manager to flash ROM on Note device. I left it long time ago. Galaxy S1 is my last device to use ROM manager.
Click to expand...
Click to collapse
Good advice. Most people seem to have more success with phils revovery on DN3. Aroma can be buggy at times and different recoveries can struggle with aroma
Sent from my GT-N7105 using XDA Premium 4 mobile app
antique_sonic said:
You can try what dalanik suggest for the bootloader.
as for the flashing of DN3, I would suggest u flash Philz CWM, or TWRP. I myself use Philz CWM (I always use his since Note1, and so far give me less headache in my personal opinion/experienced).
Anyway, CM10.2 to CM10.2 nightly are still the same base CM. When you want to jump into TW from CM, I would highy recommend to do a full wipe. And the full wipe is the best do from recovery.
I'm sorry, I have no idea on using ROM manager to flash ROM on Note device. I left it long time ago. Galaxy S1 is my last device to use ROM manager.
Click to expand...
Click to collapse
Well , I Wiped , cleared cache and dalvik cache, then flashed the DN3 rom , now im stuck in a bootloop after the DN3 finished installing, i cant access my recovery menu , i tried flashing philz and still cant access, the only thing i can access is the download mod[VolumeDown+Home+Power]
I would really appreciete some help because i might have bricked my phone, im a completely new to this, so please help in the "noob" language.
OverDub said:
Well , I Wiped , cleared cache and dalvik cache, then flashed the DN3 rom , now im stuck in a bootloop after the DN3 finished installing, i cant access my recovery menu , i tried flashing philz and still cant access, the only thing i can access is the download mod[VolumeDown+Home+Power]
I would really appreciete some help because i might have bricked my phone, im a completely new to this, so please help in the "noob" language.
Click to expand...
Click to collapse
So... you really did it from ROM manager ? I guess you are faster then I reply earlier.
ok.. Now you go to this website : http://www.mediafire.com/?v6cyi52g2ydbd
and then download : philz_touch_5.00.5-n7100.tar.md5
after that you can flash it from PC Odin (since you said u still can go into download mode).
Once you see pass and your phone reboot, press vol up + home + power to go into recovery. You shall see Philz CWM there.
here is how to flash PHilz from PC Odin :
http://forum.xda-developers.com/showthread.php?t=2028103
(go to post #2)
antique_sonic said:
So... you really did it from ROM manager ? I guess you are faster then I reply earlier.
ok.. Now you go to this website : http://www.mediafire.com/?v6cyi52g2ydbd
and then download : philz_touch_5.00.5-n7100.tar.md5
after that you can flash it from PC Odin (since you said u still can go into download mode).
Once you see pass and your phone reboot, press vol up + home + power to go into recovery. You shall see Philz CWM there.
here is how to flash PHilz from PC Odin :
http://forum.xda-developers.com/showthread.php?t=2028103
(go to post #2)
Click to expand...
Click to collapse
I followed your steps , by going into recovery and doing a full wipe , then flashing it, but i ended up in a bootloop, thanks for the quick reply
antique_sonic said:
So... you really did it from ROM manager ? I guess you are faster then I reply earlier.
ok.. Now you go to this website : http://www.mediafire.com/?v6cyi52g2ydbd
and then download : philz_touch_5.00.5-n7100.tar.md5
after that you can flash it from PC Odin (since you said u still can go into download mode).
Once you see pass and your phone reboot, press vol up + home + power to go into recovery. You shall see Philz CWM there.
here is how to flash PHilz from PC Odin :
http://forum.xda-developers.com/showthread.php?t=2028103
(go to post #2)
Click to expand...
Click to collapse
Thank you so much for solving this , i now have my old CM 10.2 Nightly , so now DN3 is a no for me because of what happened , any similar roms you can recommend ?
Thank you again
OverDub said:
Thank you so much for solving this , i now have my old CM 10.2 Nightly , so now DN3 is a no for me because of what happened , any similar roms you can recommend ?
Thank you again
Click to expand...
Click to collapse
btw.. which version of CWM Philz installed on your phone ?
if you want the Note3 features, I only know DN3. Sorry I rarely see the N7100 ROM, because I only own a N7105.
But if you don't care about Note3 feature, I believe N7100 got so many rom you can try....
antique_sonic said:
btw.. which version of CWM Philz installed on your phone ?
if you want the Note3 features, I only know DN3. Sorry I rarely see the N7100 ROM, because I only own a N7105.
But if you don't care about Note3 feature, I believe N7100 got so many rom you can try....
Click to expand...
Click to collapse
My CWM is 6.0.4.3 and the philz i downloaded before you told me to download 5.00.5 was 6.70.9 , i think its the latest.
OverDub said:
My CWM is 6.0.4.3 and the philz i downloaded before you told me to download 5.00.5 was 6.70.9 , i think its the latest.
Click to expand...
Click to collapse
yep correct.
If you ever consider to try again, inside Philz, when you choose wipe data/factory reset, there's option something like "Clean wipe to install new ROM". choose this one. It will do necessary wiping + formatting system/data and necessary formatting. Then you can wipe cache & dalvik. Then you can go on on flashing again.
Or... The best way that I always use, is to clean the internal storage (if I jump from TW to AOSP or the other way around), by using Zoots script. This script (custom wipe => mega wipe), will remove everything inside the internal storage. It will make a very clean place (until your backside ) to flash new ROM.
Link : http://forum.xda-developers.com/showthread.php?t=1983489
Use it with Philz 5.0.0.5
Just an opinion, if you would ever like to try again in the future.
All recoveries can be a bit buggy with aroma and bootloop is common. Sometimes turning the phone on and off works sometimes it can take 3 or 4 attempts to work so don't panic. I don't think one of us has never had a bootloop with aroma. As antique_sonic said I think earlier versions of phils play better with aroma. I think it's version 5.15 not 5.05 that's the one I used anyway
Sent from my GT-N7105 using XDA Premium 4 mobile app
sawdoctor said:
All recoveries can be a bit buggy with aroma and bootloop is common. Sometimes turning the phone on and off works sometimes it can take 3 or 4 attempts to work so don't panic. I don't think one of us has never had a bootloop with aroma. As antique_sonic said I think earlier versions of phils play better with aroma. I think it's version 5.15 not 5.05 that's the one I used anyway
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks
5.15 it is :highfive: