Hi All
After install Rom (GB) using Odin when the phone restarts I am presented with a password promt and I can go no futher and therefore cannot use the rom. Has anyone got any ideas?
Many thanks
go to Recovery mode and wipe data
midou16 said:
Hi All
After install Rom (GB) using Odin when the phone restarts I am presented with a password promt and I can go no futher and therefore cannot use the rom. Has anyone got any ideas?
Many thanks
Click to expand...
Click to collapse
use your password that you used before.
Related
Alright, so I dun goofed. If some kind soul could help me with this, or just point me in the right direction.
How I dun goofed:
I used the All-In-One Toolkit to unlock bootloader and flash a custom recovery. After that I pulled the boot.img out of the PrimoC CM10 rom and used the toolkit to flash that as the kernel (I realize now this was extremely stupid).
Symptoms:
Cyanogen loading screen comes up and just hangs there. When hboot runs it says "SD checking...Loading...[PK76DIAG.zip] No image! Loading [PK67DIAG.nbh] No image! etc etc etc" eventually, though, I can access the bootloader and from there, the recovery. But when I try to restore my original set up and then reboot the stock Virgin Mobile rom does the same thing and just hangs on the HTC loading screen.
Details:
-Virgin Mobile (CDMA)
-bootloader unlocked, custom recovery (TWRP v2.2.0)
I've tried everything I can think of. I've used the recovery's restore feature, I've tried to reflash a different kernel. Nothing
Any help would be greatly appreciated. Thanks.
Try cm9 ROM and try to flash the ICS boot.img cm10 causes weird problems sometimes
Sent from my One V using xda app-developers app
basalate said:
Alright, so I dun goofed. If some kind soul could help me with this, or just point me in the right direction.
How I dun goofed:
I used the All-In-One Toolkit to unlock bootloader and flash a custom recovery. After that I pulled the boot.img out of the PrimoC CM10 rom and used the toolkit to flash that as the kernel (I realize now this was extremely stupid).
Symptoms:
Cyanogen loading screen comes up and just hangs there. When hboot runs it says "SD checking...Loading...[PK76DIAG.zip] No image! Loading [PK67DIAG.nbh] No image! etc etc etc" eventually, though, I can access the bootloader and from there, the recovery. But when I try to restore my original set up and then reboot the stock Virgin Mobile rom does the same thing and just hangs on the HTC loading screen.
Details:
-Virgin Mobile (CDMA)
-bootloader unlocked, custom recovery (TWRP v2.2.0)
I've tried everything I can think of. I've used the recovery's restore feature, I've tried to reflash a different kernel. Nothing
Any help would be greatly appreciated. Thanks.
Click to expand...
Click to collapse
ok do the following
go to the fast boot menu
recovery
factory reset
wipe cache/dalvik cache
go here
http://forum.xda-developers.com/showthread.php?t=1878994
download the ROM
download boot.img
first flash the boot img in command prompt
then don't restart
go to recovery and flash the ROM
now restart
PM me if problem persists
cybervibin said:
ok do the following
go to the fast boot menu
recovery
factory reset
wipe cache/dalvik cache
go here
http://forum.xda-developers.com/showthread.php?t=1878994
download the ROM
download boot.img
first flash the boot img in command prompt
then don't restart
go to recovery and flash the ROM
now restart
PM me if problem persists
Click to expand...
Click to collapse
HOORAY! That did the trick. Thank you so much. My hat is off to you sir. :laugh:
basalate said:
HOORAY! That did the trick. Thank you so much. My hat is off to you sir. :laugh:
Click to expand...
Click to collapse
M glad to help and really glad it worked....hf
Sent from my One V using xda app-developers app
hello, i have a problem with my galaxy gio...
it is 2.2.1 and i wanted to upgradeit to a newer version.
first i tried to use the stock recovery mode (the one without many options) and so i tryed to install the clockwork recovery.
i forgot to do the root in the first place, so i have done it using superoneclick- the phone is now rooted and superuser is working great!
the only problem is that now every time i try to enter recovery mode it is stuck on the samsung logo.. and then i turn off and on to normal mode...
anybody can help me maybe restore the stock recovery?? or have a different solution??
thank's in advance! veryy much!!
solved )) if anyone meets this problem or a similar one tell me
dxdiadora said:
solved )) if anyone meets this problem or a similar one tell me
Click to expand...
Click to collapse
Why don't you just tell us right now, so we won't need to look for you and wait if you are online and stuff.
Dont install CWM on Froyo..
Thats is the problem,2.2.1 is froyo..
Sent from my GT-S5660 using Tapatalk 2
CWM isn't compatible with Froyo... You must upgrade to Ginger to use CWM. But ginger is hard to root with Super one click... So you must flash it! :good:
Flash stock 2.3.6 with Odin, then flash cwm with Odin directly afterwards.
Sent from my Nexus 7
thank you all for tips, i understood why it happened, and solved it by flashing the stock 2.3.6 using odin and then stock recovery apeared and working then i could do everything bec i got the recovery mode back to work!.
dxdiadora said:
hello, i have a problem with my galaxy gio...
it is 2.2.1 and i wanted to upgradeit to a newer version.
first i tried to use the stock recovery mode (the one without many options) and so i tryed to install the clockwork recovery.
i forgot to do the root in the first place, so i have done it using superoneclick- the phone is now rooted and superuser is working great!
the only problem is that now every time i try to enter recovery mode it is stuck on the samsung logo.. and then i turn off and on to normal mode...
anybody can help me maybe restore the stock recovery?? or have a different solution??
thank's in advance! veryy much!!
Click to expand...
Click to collapse
Same thing happened to me after i updated super user, it said 'super user signing error' when i accessed CWR from the os, and when i tried to boot it went straight to the OS (cm 7.2) - i fixed it by throwing out the battery for 5 minutes and re installing cm 7.2.
Xperia Arc LT15i, last installed was FXP150 - CyanogenMod 10 Android 4.1.2
- which I was using for almost 2 weeks without any reboots or crashes nor any setting tweaks.
Yes, I have tried checking through a lot of searches and googling, haven't found any solution so far.
I had initially rebooted my phone to recovery using the option within the OS. It went on and loaded CWM, there I just looked around the menu, and clicked "reboot system now". After that the phone started booting, but after the FreeXperia screen, just displays a blank screen and gets stuck there. I re-entered CWM, and tried rebooting, still won't boot the regular OS. I tried re-installing FXP from sd-card (the same one that I had installed 2 weeks back) but now it won't install that release either. I tried toggling signature and re-installing, it still doesn't install.
I tried connecting the phone as mass storage through CWM, but my laptop won't detect it. The adb drivers don't work despite being installed correctly. Fastboot is the only thing that seems to detect my phone. But I cannot install new ROM using fastboot.
Please help.
Switch off your phone (if you can't try battery pull)
Use flash tools and install stock firmware and follow onscreen instructions
(Search and download ics stock firmware
Connect phone in flash mode by pressing back button and connecting)
sakthi444 said:
Switch off your phone (if you can't try battery pull)
Use flash tools and install stock firmware and follow onscreen instructions
(Search and download ics stock firmware
Connect phone in flash mode by pressing back button and connecting)
Click to expand...
Click to collapse
Cant I use the tool SONY has launched for this purpose ?
Ya it'll install stock firmware... Then you have to start all over again
Sent from my Ultimate Arc S
sakthi444 said:
Ya it'll install stock firmware... Then you have to start all over again
Sent from my Ultimate Arc S
Click to expand...
Click to collapse
Is there no way to make it work on FXP from this point itself ?
I was kinda hoping I could get it to run FXP directly....
If you can access Cwm get a complete back up and then after installing stock after installing Cwm you can restore...
But the best way is to flash stock and install fresh to avoid problems
Sent from my Ultimate Arc S
sakthi444 said:
If you can access Cwm get a complete back up and then after installing stock after installing Cwm you can restore...
But the best way is to flash stock and install fresh to avoid problems
Sent from my Ultimate Arc S
Click to expand...
Click to collapse
yes, will do that ofcourse. But was wondering if there was any way to get it to work as it is.
CWM is already working, and the sd-card already contains the package too.....
Hi Guys,
I cant seem to enter recovery with DoomKernel.
My digitizer broke so I replaced it yesterday and all worked fine, it already had Doomkernel and stock Rom on and when turned on I pressed the back button and it entered recovery where I installed titanium backup from a backup.zip because I had previously done a factory reset.
I installed all my apps again (mainly games) using titanium backup and now wanted to load the Jokawild ROM, i turned the phone off and tried to enter recovery using the back key and the phone just wont go into recover.
I reflashed the firmware so it is a new install and re-flashed Doomkernel but still I can not get into recovery to load a ROM.
Can anyone please help me solve this issue?
Thanks in advance.
Fraymond said:
Hi Guys,
I cant seem to enter recovery with DoomKernel.
My digitizer broke so I replaced it yesterday and all worked fine, it already had Doomkernel and stock Rom on and when turned on I pressed the back button and it entered recovery where I installed titanium backup from a backup.zip because I had previously done a factory reset.
I installed all my apps again (mainly games) using titanium backup and now wanted to load the Jokawild ROM, i turned the phone off and tried to enter recovery using the back key and the phone just wont go into recover.
I reflashed the firmware so it is a new install and re-flashed Doomkernel but still I can not get into recovery to load a ROM.
Can anyone please help me solve this issue?
Thanks in advance.
Click to expand...
Click to collapse
Do you have same problem with other kernels?
Jecmenn said:
Do you have same problem with other kernels?
Click to expand...
Click to collapse
I have only ever used Doomkernel and never had this issue before
Fraymond said:
Hi Guys,
I cant seem to enter recovery with DoomKernel.
My digitizer broke so I replaced it yesterday and all worked fine, it already had Doomkernel and stock Rom on and when turned on I pressed the back button and it entered recovery where I installed titanium backup from a backup.zip because I had previously done a factory reset.
I installed all my apps again (mainly games) using titanium backup and now wanted to load the Jokawild ROM, i turned the phone off and tried to enter recovery using the back key and the phone just wont go into recover.
I reflashed the firmware so it is a new install and re-flashed Doomkernel but still I can not get into recovery to load a ROM.
Can anyone please help me solve this issue?
Thanks in advance.
Click to expand...
Click to collapse
Have you tried this https://play.google.com/store/apps/details?id=com.siriusapplications.quickboot&hl=en
Hello Im having a lot of problems with my device. Its the GT-P5220. I was trying to install a rom. But now I cant get out of the bootloop. I wiped everything and tried installing the rom but it says no os installed and then it keeps on going into a bootloop back to recovery. I can acess adb and push and sideload the rom. But I have no idea what to do now? I also think i wiped the internal storage via twrp if that is the problem. Thanks in Advance.
tcmixx said:
Hello Im having a lot of problems with my device. Its the GT-P5220. I was trying to install a rom. But now I cant get out of the bootloop. I wiped everything and tried installing the rom but it says no os installed and then it keeps on going into a bootloop back to recovery. I can acess adb and push and sideload the rom. But I have no idea what to do now? I also think i wiped the internal storage via twrp if that is the problem. Thanks in Advance.
Click to expand...
Click to collapse
why dont you use odin in download mode?
chchia said:
why dont you use odin in download mode?
Click to expand...
Click to collapse
I can't acess download mode via button press. It only goes into recovery.