Related
Hi!
Does anyone know where to find ROMS for HKC G1000 (DUAL SIM WM6)?
Many thanks!
i have one. they sent it to me coz i complained about noise being picked up by phone1. tried reflashing, but still the same problem.
Hi I have a HKC G1000, and do not do as a HARD RESET, as you know, thanks
I've got the last (november 2008) English ROM for HKC G1000 when been in ShenZhen month ago. If you need - I can upload it somewhere.
THOMYROS said:
Hi I have a HKC G1000, and do not do as a HARD RESET, as you know, thanks
Click to expand...
Click to collapse
There is Icon with green tree in Settings menu - search for it!
Hkc G1000 hard reset
Hi,
i have the same problem, i have installed a program now the phone is blocked in the windows boot up screen.
Did you solve the problem?
Could you help me please?
Thanks
try this
3 key press together for re-start:
G2 (Dial sim card 2 key) + Camera key (on the right side, near the on/off key) + on/off key.
9rinder said:
I've got the last (november 2008) English ROM for HKC G1000 when been in ShenZhen month ago. If you need - I can upload it somewhere.
Click to expand...
Click to collapse
hi, can i have it? please provide a link for download. thanks... hopefully it will solve my noise problem on phone 1. thanks...
can you post your rom versions?
mine is Under Device Information: WM6_HKC_G1000_VER_07
Hkc G1000
Thank you very much Pranix,
it worked ,
but only after take off the battery for 15 min. and with G1 button at place of G2.
I'm also interested to have the Rom (just in case
If you can provide a link it will be much appreciated.
mine is:
ROM: WM6_HKC_G1000_VER_07
RADIO: PPC_DMDC_RIL_01.01
PROTOCOL: W8.5P8.4
DRAGONFLY: DV17-MODULE-VER-07.12.2
Just a curiosity: this pda it supposed to have 64 Mb of ram, but on "about" i read only 43,74 Mb,
it's your the same or not?
Thanks again
we have the same version.
http://uploading.com/files/G05UZJ16/HKC G1000.rar.html
hopefully someone here can modify and update it to wm 6.1
how's the sound quality of your phone?
i have a problem with phone 1, it picks up alot of ambience noise.
difficult to hear the other person you're talking to.
if you put your hand over the mouthpiece, and also the earpiece, it creates a feedback sound.
no problem on phone 2.
Hkc G1000
Hi Pranix,
thanks for the rom file after i'll ask you how to flash it.
My phone works good both sims, your, sounds to be an hardware
problem, since you told that you have flashed the rom.
The set of the microphone for the sim 1 is too sensible, and when you put the hand on the micro, it cause what is called "larsen effectc", that happend when the sensibility of the microphone is too high and trigger a feedback from the earphone that cause an annoying whistle .
In an italian forum, I heard about an engineering code to write down in the
china phones with WM6, that allow you to set some hardware features
of the phone including the sound level, I don't know if this is possible also with our phone. but it worth a try.
I'll go to ask in the forum and if pertinent, i'll post you the answer.
Bye
hi,
the procedure to flash is in the rar file that i have uploaded.
just open the text file.
hope you can find some way to minimize the sensitivity of microphone setting for phone 1.
regards,
pranix
Hi Pranix,
he say that the code "engineer mode" it is available only on the china phones with the RTOS operating system, and in some motorola and Nokias,
but he say that maybe it is possible to change the parameters set on the windows registry, with a pc program like CeRegEditor.
Connect the phone to the pc, start CeRegEditor, make it read the registry, click on unlock (if not you can't save the changes), after that you have to look where are located the keys regarding the audio, and see if modifiyng the key value you can solve the problem.
I will look further if i find some else solution
good luck
i already tried editing registry however still the same.
maybe i was editing the wrong registry. hehe
i just hope that 9rinder gets to post his rom here
Pranix said:
i just hope that 9rinder gets to post his rom here
Click to expand...
Click to collapse
Here is link, try it, guys:
http://rapidshare.com/files/195288870/HKC.ZIP.html
Hi Pranix,
take a look here, maybe help:
http://forum.xda-developers.com/showthread.php?t=256734
then search on the registry with the keyword "volume"
9rinder said:
Here is link, try it, guys:
http://rapidshare.com/files/195288870/HKC.ZIP.html
Click to expand...
Click to collapse
hi,
can you post your rom details?
i downloaded the rom, it seems your rom & my rom are the same.
i checked the date & time stamp, its identical.
i also asked my contact at hkc, still no new rom since i asked for it sometime june.
how's the audio quality on your phone 1 & phone 2?
can you hear the calling party clearly?
oxyjo said:
Hi Pranix,
take a look here, maybe help:
http://forum.xda-developers.com/showthread.php?t=256734
then search on the registry with the keyword "volume"
Click to expand...
Click to collapse
i've actually tried editing those registries before however still the same.
the question here is that do we have one or two mircrophones?
coz if only one, then there must be a setting somewhere to adjust phone 1 & phone 2. phone 2 sound is better than phone 1.
if two microphones, i cant find the settings as there is only one setting to tweak.
Hello. I have one of this PDa.
Mine has this ROM:
ROM version:WM6_SITRONICS_SD106_VER_05
Radio version: CYNTHIA850_DMDC_RIL_01.01
Protocol version: W8.5P8.4
Dragonfly Version:CYNTHIA850 TF-DV17-MODULE-VER-07.16 Feb 18 2008 13:02:06
Do you recommend me to update?
Is any way to "extract" its original ROM?
And is any way to "edit" any of your roms to change the language of the OS?
Thanks
Hi!
I find this web site with flash and rom for x18i:
translate.googleusercontent.c...WmzgU6W-gvPo9g
And other with flashtools to MT6573:
china-gsm.ru/2011/11/22/flash-tool.html
forum with a lot information x18i:
translate.google.com/translate?hl=en&sl=zh-CN&tl=es&u=http%3A%2F%2Fproducts.mobileuncle.com%2Findex.php%3Fgid%3D32
I don´t test any aplicattion. If somebody try to test it, please post it.
Happy Christmas!!
framework damaged on Star X18i
hello,
I damaged the folder framework of this phone and I can not start it.
Is freezing on the blue android honeycomb screen.
I'm trying to install the new Android 2.3.4 firmware but I can not connect to SP Flash Tool.
How do I? The program does not recognize it. Help me please!
Sorry, but in this moment I can´t help you because i don´t have the knowledge required for it.
I see you on other forum. Now, I have collecting information of X18i. Is difficult, because the phone is new and only find chinese information.
Information gathered will pass it for you.
1- Explain me: What have you done to break the framework?
2- I want to install other rom. The last version of Whatsapp don´t run.Do you know to install other rom?
Merry Crhistmas!
I did flash the phone but now will not start. Turns on but nothing appears on screen.
I need the complete rom for this phone, but I can not find on the net.
: (
Factory ROM
I deleted some system files — rooted. Now I have 'android.process.acore' when I try to see my contacts.
I need to reinstall the factory ROM.
Can anyone pack and send me a link of the X18i's ROM?
hp/w ww.medi afire.com/?k5hrll515rrntrh
It s a cooked Rom, from vnese community, chínese things free. Hope it helps
Nhà quê 2 said:
hp/w ww.medi afire.com/?k5hrll515rrntrh
It s a cooked Rom, from vnese community, chínese things free. Hope it helps
Click to expand...
Click to collapse
How to flash that ROM? Please......
Jazalogo said:
I deleted some system files — rooted. Now I have 'android.process.acore' when I try to see my contacts.
I need to reinstall the factory ROM.
Can anyone pack and send me a link of the X18i's ROM?
Click to expand...
Click to collapse
how u rooted this android?
New rom
Is there any new rom for Star X18i? I saw 2.3.7 rom in a Chinese website but I couldn't sign up.
bulentcandan said:
Is there any new rom for Star X18i? I saw 2.3.7 rom in a Chinese website but I couldn't sign up.
Click to expand...
Click to collapse
Hi !!!
Have you rooted you star x18i ??
can help me because I dont find info about
Thanks
Star X18i Cam & flashlight Problem
Here i am finding some thing about Star X18i Camera, Screen and flashlight problem..
Just a little trick for those who are worried about Blank Screen, Or Camera Problem, Or Flash light Problem.
Many complain that after flashing the phone "fall off" the camera (front or rear), the display is not working properly (does not show anything, skewed, wrong brightness, wrong color and so on). The fact is that the manufacturer of the device changes over time. In different batches of devices can be set to the same array of cameras, different display controllers. To account for these situations in uboot firmware file made every possible driver (at the time of the release of firmware) for the cameras and display specific device. All you have to do - is to specify the correct sensors front and rear camera and a faithful display controller. Do not worry if you make a mistake in these parameters. Just ask one more time and options.
If both options are not suitable, then ... If the display is not working properly - Pick up the correct display of the controller are available for selection. If not working the front or rear camera (or both), pick the correct sensor for the camera. Of the camera is easy to check by running a standard Camera program.
OPEN uboot file in any hex editor and find these lines..
AGOLD$LCM$DRV
Here put your Display driver name i.e (truly3p2049$R) without braces.
And then find this line.
AGOLD$CAM$DRV hi253yuv hi704yuv NONE
Replace hi253yuv with ov3660yuv and do not edit anything else.
---------------------------------------------------------------------------------------------
After specifying all the data for the cameras and the display controller save and close the program.
Open the program SP Flash Tool.
Push the button Scatter-loading and select the file Android_scatter.txt (he is in the folder with the firmware).
Remove all ticks except uboot and Flash this file..
\\Have a good luck :good:
babarali321 said:
Here i am finding some thing about Star X18i Camera, Screen and flashlight problem..
Just a little trick for those who are worried about Blank Screen, Or Camera Problem, Or Flash light Problem.
Many complain that after flashing the phone "fall off" the camera (front or rear), the display is not working properly (does not show anything, skewed, wrong brightness, wrong color and so on). The fact is that the manufacturer of the device changes over time. In different batches of devices can be set to the same array of cameras, different display controllers. To account for these situations in uboot firmware file made every possible driver (at the time of the release of firmware) for the cameras and display specific device. All you have to do - is to specify the correct sensors front and rear camera and a faithful display controller. Do not worry if you make a mistake in these parameters. Just ask one more time and options.
If both options are not suitable, then ... If the display is not working properly - Pick up the correct display of the controller are available for selection. If not working the front or rear camera (or both), pick the correct sensor for the camera. Of the camera is easy to check by running a standard Camera program.
OPEN uboot file in any hex editor and find these lines..
AGOLD$LCM$DRV
Here put your Display driver name i.e (truly3p2049$R) without braces.
And then find this line.
AGOLD$CAM$DRV hi253yuv hi704yuv NONE
Replace hi253yuv with ov3660yuv and do not edit anything else.
---------------------------------------------------------------------------------------------
After specifying all the data for the cameras and the display controller save and close the program.
Open the program SP Flash Tool.
Push the button Scatter-loading and select the file Android_scatter.txt (he is in the folder with the firmware).
Remove all ticks except uboot and Flash this file..
\\Have a good luck :good:
Click to expand...
Click to collapse
Hi Friend
There is anyway i can check wich driver my camera uses? both front and back camera and flash are not working.
I tried ov3660yuv with no sucess.
Thanks
Yesterday I bricked my brand new P8000(B) - the new version with Marshmallow 'out of the box' (and the new SIM slots etc...)
I tryed to reflash several stock- and custom ROM's but they don't work because they are made for the 'old' version and there must be major differences in the hardware. At the moment the main problem is that the LCD driver is wrong and the display shows only lines and blurry spots
The Phone was running on ROM "P8000_6.0_20160516" - this ROM is not available at needrom or bbs.elephone.hk even Google doesnt know
It would help a lot if some could supply the ROM "P8000_6.0_20160516" - thank you!
FrauHofrat said:
Yesterday I bricked my brand new P8000(B) - the new version with Marshmallow 'out of the box' (and the new SIM slots etc...)
I tryed to reflash several stock- and custom ROM's but they don't work because they are made for the 'old' version and there must be major differences in the hardware. At the moment the main problem is that the LCD driver is wrong and the display shows only lines and blurry spots
The Phone was running on ROM "P8000_6.0_20160516" - this ROM is not available at needrom or bbs.elephone.hk even Google doesnt know
It would help a lot if some could supply the ROM "P8000_6.0_20160516" - thank you!
Click to expand...
Click to collapse
I can do nothing else than blaming you, I wrote a reply yesterday to the eragon forum that there's someone else who flashed -not even a custom rom- just the root .zip that was for the "old" p8000 and got his phone bricked the same way as you (LCD driver problem). That's why I asked for a dump/backup. It could have been useful for you too (as in this case) and for the other guy too. But nevermind, I hope that you learn from this for later things... anyways, the other guy has contacted elephone on their facebook, so I hope you'll get the rom so you can use your device again. Good luck!
I have this version too, just got it today.
If someone can explain to me how to create the scatter file and the backup, I'll do it.
I have some experience with this stuff, but MTKDroidTools tells me unknown rom structure.
Any help?
I do have the same problem (see here: http://forum.xda-developers.com/elephone-p8000/general/rom-p8000-t3431571 ). I just wanted to root the phone because I liked to change the wifi modem file but i didn't even realize that I got another version of the phone at this point, so I bricked it.
I also contacted the support via facebook, but the support guy had to ask the engineers for help.
But maybe someone can help Emileh taking a dump of his phone, that would be really great!
@ardrift
you are sooo right but I have'n expected that two phones of the same type contain conplete different hardware respectively the firmware is not supporting both hardware versions. Even the manufacturer does not metion to check the hardware version before flashing...
@Emileh @flo1k
I do have a second 'untouched' P8000(B) too - and I'm starving to copy the firmware from this working phone to the faulty phone if someone could explain how...
problem solved
flo1k managed to get a stock ROM for this hardware version - the softwarepackage is named K06TE-A.A.vR14.E1.160707 and should be available at the elephone forum soon....
Further information you can get here http://forum.xda-developers.com/elephone-p8000/general/2016-version-fingerprint-scanner-t3436270
My LG G3 wifi and bluetooth stucked at turning on. Tried factory reset and flashed the ROM but still not working. Have not tried changing to another Kernel yet, you know one? Could it be hardware problem? I read Marshmallow update would be the solution...or install another rom. Please someone give a solution
gsmunlockremote said:
Wifi and bluetooth adress can be fixed with profesional tool
Click to expand...
Click to collapse
A oc
What kind of professional tools are we referring here?
probably a hardware issue...
Hi there!
First of all, someone in the forums mentioned that this (your) problem could be caused by the battery, that changing the battery may solve the issue.
Second, I had the same problem on my G2 and I believe this sort of problem occurs mostly on all kind of LG devices. I wrote a detailed post of what I have researched, you might want to check it out here: http://forum.xda-developers.com/general/help/qa-wifi-stuck-mac-020000000000-g2-g3-g4-t3452133
Good luck!
i heatead the wifi antenna at 180°C and now are working !!
Ciao guys,
I have a problem with this goddamn device: Huawei P30 Lite. It's about one week I'm trying to downgrade it 'cause there is the FRP situation (the owner has wiped data/cache and he forgot his e-mail and pw of his Google account). I tried EVERYTHING: dongle, keys, unlock softwares, downgrades but nothing to do. This particular device is from Singapore (Region code C636) and is called MAR-LX2. At the moment the only upgrade I can do is from the 9.1.0.310 to the 9.1.0.215 firmware.
Could you help me?
Love you guys, waiting for your help.
Best regards,
Enrico
No one could help me?
lordfreedom93 said:
No one could help me?
Click to expand...
Click to collapse
Bro i also have this phone... & I have this situation
Kindly help me... The extracted apk of Always on display (downloaded from xda) dont work on my p30lite like hw,recorder worked as an emveded feature of my phone after installing it via xda
I want this feature but without any other app bcz they consume bettery & interfere when i unlock my phone (I've tried using glance plus or other AOD apks form playstore)
I want this function in My settings & as a default feature like hwRecorder (hwRecorder wasnt in my phone built-in,i installed it from by downloaing from XDA.
same problem here any solution thanks