I have flashed CWM over my N5120,
I am not sure if I get anything wrong in the procedure.
However, everytime I start the machine. It get a screen malfunction.
Cwm and download mode work fine.
Then, I decided to flash back N5120 rom from sammobile thr. odin.
Screen malfunction still exist and I found out that snote will FC no matter which version of rom I flash.
Anyone has any idea on the issue?
How should I fix it?
Thank you very much for help.
Hope someone can help me.
Related
Hello,
I was recently attempting to flash the new Cyanogenmod 10 ROM to my phone and I've found myself in a bootloop (the logo just continuously circles). I actually know what error I made to cause this, but the problem is, I have no access to any recovery menus anymore. All I can access is download mode. I can still use Odin and connect to the phone, but other than that I'm at a loss for what to do. I have backups of everything, I just need to get the phone wiped and back to factory set and start over. Unfortunately, without a recovery menu I don't know what to do.
What should I do from here?
Solved it.
For anyone that has this issue in the future, I plugged into the computer and ran Odin and was able to have it install a stock ICS ROM and I just started over.
Good job with solving the issue on your own! :good:
Your issue and solution had been discussed on these forums already. As a tip for the next time you have an issue, make sure to use the search bar first. Cheers!
Hey guys, basically, i'm new-ish to flashing, but i was able to do it following all instructions. Yesterday i installed an s5 theme from this site that caused my phone to have problems such as the wifi not working. I was reading that flashing a custom kernel might help, it didn't.
So i woke up, entered my TWRP custom recovery and stupidly factory wiped everything, now my phone wont get past the 'Samsung galaxy s III' screen, it just stays there. I have no idea what to do, i'm dumb enough not to make a recovery file before i started all this so i've ****ed up there.
If anyone can help me get my phone back i'll be extremely happy, i just want it working again! I have work in a few hours and really hope to fix it before then! Any help is appreciated.
well i posted this for someone else who wiped their phone, maybe it would help you. OR i got it all wrong. lol (i know, not so funny).
can you take your ext.sd card , put in different phone, download a ROM and whatever else you need. then place ext.sd card back in your phone and flash away? IDK, might work.
good luck.
err on the side of kindness
What mrrocketdog said, and you can flash a ROM with S5 theme already built in.. If you just want it back to stock, flash newest firmware for your device with Odin
I ran into a problem when flashing and rooting my S4 Mini 4G LTE and after it leaves download mode, the screen goes black, and the wont turn on, except in the when the phone is of and it shows the battery charging, and in download mode itself.
Upon closer inspection, I noticed that I have flashed the wrong kernel and CWM, for the 3G version, not the 4G.
Is there anyway to fix this??
I have a feeling that if I tried to apply a stock kernel and firmware that it would solve the problem.
But without access to recovery I am not sure how to do this.
Would there be a way to do this with Odin or a computer program, or is there something I have missed.
Thanks in advance, and I'll be here all day till I can fix it
Simply download the stuff that is meant for 4g s4 mini and flash them via odin.
as u say download mode is available.
Hello there, all xda members.
I got Ace 2 to fix from my friend. He doesnt know exactly why did the phone becoming stuck on bootlogo. Maybe messing up with flashing GB or JB. or maybe wrong terminal command.
Ace 2 Condition :
- Its unable to pass boot logo samsung galaxy ace 2
- Its unable to enter recovery mode
- Its able to enter download mode, and its custom binary download : No, Current binary : Samsung official
Here all the thing that i have tried to fix the phone :
1. Flashing the phone with Russian Gingerbread with 3 files, Pit, CSC, and PDA. But it still stuck on bootlogo and unable to enter stock recovery. it shows succeed though on Odin, but it can't boot.
2. Flashing the phone with Latest Jelly bean, with Jelly bean pit file. Odin displaying succeed, but it doesnt boot either.
Can someone help me how to solve this problem?
Is there a condition where phone completely unable to recover from hardbrick such as stuck on bootlogo, but still able to enter download mode?
I'm going to download jelly bean mb2 or mb4 which include pit and csc from jelly bean and try to reflash it. Hope it gonna work.
Thanks for any help.
Anyone here to help me?
@ChronoMonochrome , maybe you've experienced something like this and able to resolve the problem.
The phone can't boot at all. and im a little frustrated here. I've already tried a 3 parted firmware MB4, and it doesnt work either. Tried to flash chrono 4.3 cwm through odin and it doesnt work either.
And if it really doesnt have a solution, maybe i'll just give it up. And doesnt continue researching to fix this phone. Thanks
maybe another devs that able to fix this. @ace2nutzer @fluffi444 or anyone??
It got the same case. Successfull flashing, but still doesnt boot, it just like flashing is fail. or it just like it reverted the way it was before flashing. Your help is very appreciated.
riyosakura said:
maybe another devs that able to fix this. @ace2nutzer @fluffi444 or anyone??
Click to expand...
Click to collapse
Very strange. And more strange is that several people have this "only boot to logo / only downloadmode issue"
Up to now I have no Idea - I asume that ADB is not working, because of missing recovery mode? With ADB there are plenty of possibilities.
An complete Factory reset could be helpfull - But how to do it out of downloadmode ?! Don't know.
Up to now I didn't had a Phone with this behaviour for repair at home. If it would be reproducible how this all happens, I would bring my phone to this state to find out how to repair it (riff box here - so dead ACE 2 is not a problem) - But even this is unclear - Every report regarding this said only "suddenly" "without any reason" "flashed this or that" - But no exact infomation what happend acctually.
I'm out of Ideas. Sorry!
Thanks for answering.
I dont know if i have to give up already or not. But i'll try to flash it with another pc and data cable. Maybe it gonna work.
riyosakura said:
Thanks for answering.
I dont know if i have to give up already or not. But i'll try to flash it with another pc and data cable. Maybe it gonna work.
Click to expand...
Click to collapse
Another try:
Flash with ODIN Ace2Nutzers Stock Kernel (search on FTP)
Do not let the Phone boot
After Flashing pull usb und press drictly the 3 keys to get into Rec. Mode
riyosakura said:
Anyone here to help me?
@ChronoMonochrome , maybe you've experienced something like this and able to resolve the problem.
The phone can't boot at all. and im a little frustrated here. I've already tried a 3 parted firmware MB4, and it doesnt work either. Tried to flash chrono 4.3 cwm through odin and it doesnt work either.
Click to expand...
Click to collapse
No, I haven't had the phone in such condition as described above. But I have heard that any odin-flashable file that's wrongly flashed via "Phone" entry can lead brick which is similar to this. I remember only one case - one user from 4pda has flashed some file via odin, wrongly putting file to the "phone", and wasn't able to restore it anyhow - but he also had some brick on GPIO side - vol.up worked like vol.down, and the real vol.down didn't work at all. I don't know however, what memory partitions / any devices capable of storing data would be messed after this operation, and whether it's reparable at all. I mentioned devices, that can also store data, I know only that touchscreen has small memory for its firmware(that what I had broke one day in the past after accidental firmware change in the kernel) - but maybe some other devices also has it?!
There are also some chances that it's dead flash memory - chances are pretty small, but should also be taken into account.
So my issue is pretty similar, see what you guys think. i been trying everything i can think of.
i updated from xtrestolite 2.1 to 2.2 with out wiping. everything worked fine except when i would make calls, the other people could not hear me. so i updated the bootloader and modem again (i had done it before) and the problem persisted. i flashed back to stock and was getting stuck at the s6 edge screen. the only way to get around this was and get my phone to boot was to flash aou kernel. i was still having a similar issue with calling so I download a modem from a diffrent server and all of a sudden, it was working again on stock firmware... AWESOME!
now that i had all that done and my phone working as it should, i reset my phone for the first time and i got the FRP lock, wont boot phone because custom kernel. GREAT
I then flashed stock of6 again, the tar ball, and the 4 piece version. no dice
i then found of8, tried to flash that still no dice.
id love to flash twrp and load a rom on, but FRP is a alsjdflajs.
the phone will flash successfully, but upon reboot, it will go into recovery, run its course, reboot, and get stuck that the galaxy s6 edge screen.
i use the vol and power click during recovery to see what its doing and everything seems to go fine. it will then say failed to mount /data. im hoping flashing this with the pit file will work, but i cannot download the pit file from my work computer (hahah its blocks on 4shard and mega).
anyone have any other advice? i will update if i figure it out.
Regards team,
-Mad
p.s. none of this is xtrestolite's fault, that rom has been nothing but good to me.. my phone has been picky though. after 5.1.1 i had to flash a custom kernel in order for the digitizer to function properly.... any help is appriciated guys.
SO UPDATE!
nothing good, i tried the pit with of6 and of8, no dice. still stuck.
anyone got a s6 edge w a broken screen? you can claim it lost for all i care.
no one?
i guess if anything past flash stock firmware people dont know? was hoping for alittle more insight.
im sure if i could flash a kernel i could get it to turn on, but FRP has be at bay...
no help for you bro...Samsung just needs to release there software fixing for this comunity...I'm looking a for a dev to answer my question in this section about just flashing zip files in twrp instead of using odin or whatever other methods that can avoid all these problems that are all similar...hopefully in next few months it will be addressed
Hey mate, try this...
http://forum.xda-developers.com/showthread.php?p=61531848
Sent from my SM-G925T using Tapatalk 2
holy... fu34%# /S45it.... IT BOOT?!
after flashing every firmware 100000 times...
THANK YOU!
I initially used odin to flash OI1 update, after a rom I was using caused problems and I got bootloop. It changed bootloader value to b:3 and I'm unable to downgrade now so I used smart switch which didn't recognize device so used emergency recovery and still bootloop. I have factory reset and wipe cache multiple times along with adb side load and individual flashes of bootloader, modem, kernel, flashed custom kernel and twrp to access fix permissions and to mount partitions with advanced wipe etc and still wont boot past logo. Also during one fix attempt phone said can't mount system.. Idk I'm not understanding where the problem is .everything says successful but I'm still in bootloop. Please help. I've spent hours everyday for the past week searching & trying different things that seem might help so open to any suggestions.