Develop Bugs

iGO8.3.2.64873

Hi,
I use iGO8.3.2.64873 on WM6.1 with follow sys.txt:
[folders]
app="%SDCARD%/iGO8"
[sound]
mute_os_key=1
use_os_volume=0
ding=0
[route]
correctness=90
[device]
sdcard_dsk_num=7
[interface]
maxzoom2d=6000000
show_exit=1
show_minimize=0
skin="ui_igo8"
resolution_dir="480_800"
maxzoom2d=6000000
screen_x=480
screen_y=800
vga=1
wide=1
recalc_voice=0
mapfontscale=200
drive_carefully=0
popup_info=1
laneinfo_signpost_enabled=1
shutdown_time=0
show_orientation=1
defaultzoom3d=40
[rawdisplay]
highres=0
autoconfig=1
screen_x=480
screen_y=800
class="auto"
driver="GDI"
[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
skip_exit_numbers=0
announce_exit_direction=1
[3d_config]
disable_roadsign_navigation_mode=0
roadsign_lines_per_screen=18
rotated_roadsigns=0
[3d]
show_guidance_arrows=1
show_guidance_strip=1
[map]
2dheadup=1
show_oneway=1
3d_max_tiltlevel=8900
3d_default_tiltlevel=8900
map_mode="3D"
show_labels=1
textured_poly=1
3d_scale_carmodel=1
3dcarsizemin=3000
3dcarsizemax=4000
3dcarsizemul=10000
[feature]
signpost_coloring=1
[smartzoom]
restore_smartzoom_on=1
enabled=1
enabled2d=1
minangle=70
maxangle=81
[msnd]
enabled=0
[timezone]
sync_os_timezone=0
reset_os_timezone=0
[warning]
speedcam_visualtype=1
speedcam_soundtype=2
speedcam_snap_distance=200
speedcam_max_lookahead=600
speedcam_maxdistance_from_road=10
[navigation]
skip_grab_viewchanging=1
sim_speed_factor=3
show_current_city=1
show_countrychange=1
[debug]
sound_q_length=200
queue_length=200
disable_outlookpoi=0
show_oneway=1
show_speed_limit=1
skip_eula=1
enable_roadshadow=1
cache=2048
reserve_memory=2000000
tts_min_ready_wav=1
tts_getaway_time=100
tts_expected_engine_delay=1400
supress_trivial_left=1
supress_trivial_right=1
mute_os_key=1
screen_calibration=1
lang_registry_2006=1
bringtotop_afterresume=1
enable_roadsign=1
show_gps_pos=1
show_oneway_3d=1
show_lane_info=1
show_signpost=1
show_arrows_on_route=1
I installed newest data.zip and branding.zip (v9c)
most from my Problem was fixed after but i have a new one now
I copy the speedcam.txt on folder -> /content/spedcam. check folder iGO8 convert that -> ok
I can see the speed cams on maps but iG08 don't warn me.
I copy the audio files to -> igo8/audio but see only the pictures on navi and don't warning tones. Is my sys.txt wrong? or missing any audio oder voice files?
regards

You only get an audible warning if you're going over the speed limit I think.

The warnings are in the "Speed Camera" settings page. This page however only appears when there is a GPS lock.

i cant see Speed camera settings...
Where can i found this?
Settings->Warnings cant see any speed cam setting... may be wrong sys.txt?

Gozengo said:
i cant see Speed camera settings...
Where can i found this?
Settings->Warnings cant see any speed cam setting... may be wrong sys.txt?
Click to expand...
Click to collapse
i found: Speedcam settings are active if gps signal are available...

Can you please tell me where I could find the newest data.zip and branding.zip (v9c).
Thanks
BC

i been searching and found that the version you are using is the only version that i could use with the jensen nav101 and i was wondering if you or anybody could tell me exactly how to install this or point me to the right spot to find this cause i tried every thing and only getting the message "program database cannot be found"

igo8 htc touch pro 2

hi all ,
does any one know if igo8.3.2 works on this device?

Yep.
I use it without any problem in 800-400 and TTS.

sys.ini
how does your sys.ini looks like ?

http://forum.xda-developers.com/search.php
this link will have all answer of your questions....try it
[folders]
app="\SpeicherkartemSdcardWhatever\iGO8"
[interface]
maxzoom2d=6000000
show_exit=1
skin="ui_igo8"
resolution_dir="800_480"
maxzoom2d=6000000
screen_x=800
screen_y=480
vga=0
[device]
sdcard_dsk_num=7
[rawdisplay]
highres=0
screen_x=800
screen_y=480
class="landscape"
driver="GDI"

hebrew support
since you guys are more than helpfull i was wondering if touch pro 2 has hebrew support(not pdac or eyron..

[folders]
app="opslagkaart/iGO8"
[interface]
maxzoom2d=6000000
show_exit=1
popup_info=1
poi_show_all_btn=1
[rawdisplay]
highres=1
screen_x=800
screen_y=480
class="landscape"
[navigation]
sim_speed_factor=4.0
[debug]
show_oneway_3d=1
show_oneway=1
show_gps_pos=1
skip_eula=1
show_pedestrian=1
poi_labels=1
show_arrows_on_route=1
tts_min_ready_wav=1
tts_getaway_time=200
tts_expected_engine_delay=1400
reserve_memory=4197304
sound_q_length="200"
no_file_cache="0"
cache="2048"
enable_roadshadow=0
[map]
popup_info=1
show_labels=1
alternative_roadnames=1
3d_max_tiltlevel=9000
2dheadup=1
[msnd]
msnd.start=0
[tts]
tts_buffer=262144
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
announce_exit_directions=1
skip_exit_numbers=0

Can you use TMC in iGO? I tried it, but it doesn't work... :-/

deaad said:
Yep.
I use it without any problem in 800-400 and TTS.
Click to expand...
Click to collapse
I've been trying to get TTS to work for weeks, with no success so far. Whenever I select a TTS voice it's silent.
How did you install TTS? Would it be possible to post of list of the folders/files in your Igo setup?
I don't have sys.ini file - only a sys.txt file - could this be a problem?

hello,
i also have proplems with tts . has anyone a solution?
thx

This is what worked for me after half a day of trying different settings:
[folders]
app="%SDCARD%/iGO8"
save="%SDCard%/iGO8/save"
[device]
Type="ALIAS_TOUCH HD"
sdcard_dsk_num=7
[interface]
maxzoom2d=6000000
show_exit=1
show_minimize=0
skin="ui_igo8"
resolution_dir="480_800"
screen_x=480
screen_y=800
vga=1
wide=1
recalc_voice=0
mapfontscale=200
drive_carefully=0
popup_info=1
laneinfo_signpost_enabled=1
shutdown_time=0
show_orientation=1
defaultzoom3d=40
[rawdisplay]
highres=0
autoconfig=1
driver=GDI
[sound]
ding=0
[config]
autoset2donmap=1
autoset3doncockpit=1
[sound.announcer]
gps_disconnected=0
gps_signal_lost=0
Recalc_voice=0
[map]
3d_max_tiltlevel=8000
3d_max_zoomlevel=3000
3d_min_zoomlevel=40
3d_max_zfar=2000
3d_scale_carmodel=1
3dcarsizemin=3500
3dcarsizemax=5000
3d_carsizeemul=60000
[tts]
always_say_road_names=1
announce_exit_directions=1
announce_street_name=1
gps_disconnected=0
gps_signal_lost=0
Recalc_voice=0
[debug]
disable_outlookpoi=0
show_oneway=1
show_oneway_3d=1
show_lane_info=1
show_speed_limit=0
skip_eula=1
enable_roadshadow=1
[power]
powermgm_state=0
backlight_day=95
Backlight_night=15
[poi]
enable_pois_before_080217=1

what is the best baud rate to set up the GPS settings.
I also noticed that the GPS is little bit off in few meters how can I fix that.
I am running Rom 6.5 europe on T Mobile

I use unbranded TP2 with the below configuration:
[gps]
internal=1
source="virtserial"
port=0
baud=38400
It was working flawlessly with WM6.1; same with the latest official WM6.5.

I have been working on to get Igo 8 on it,
but everytime I start it up, it says:
failed to open file: ui_igo8\480_800\loading.bmp exiting application.
Can somebody explain what I am doing wrong?
tnx

An error you report means, you use "data.zip" file that does not support skin being selected.
Either you should change the skin or google for a right "data.zip" file.

all right, those of you who claim to be using 480-800 settings, i'm not saying you're wrong, but have you tried to install a 480-800 skin? whenever i put a 480-800 into my skins folder the program ignores it. however, the lower resolution version of the skin shows up and has no problem loading. this leads me to believe that the program is not actually running at 480-800. am i missing something here? any igo8 gurus have any idea?

iGO8 shows only skins fitting into it's settings so lack of 480x800 resolution means incorrect sys.txt
I use the below settings to get Gurjon skin working fine with 480x800 resolution:
[rawdisplay]
highres=0
autoconfig=1
driver="gx"
screen_y=800
screen_x=480
Additionally, you need to have data.zip file supporting this resolution, otherwise you will receive an error message as reported few posts before.
[edit]
Please note that there are TWO copies of sys.txt - one is located on your SD card while the second is (typically) located on your device in program files\igo8 folder.
iGO8 is using that SECOND one...

tovermars - first off your having that error because u have the wrong data.zip that doesnt have a 480x800 resolution in the zip file and or ur sys.txt file isnt in landscape mode...uur best bet to try to see if u have atleast one of them right..is to before u start igo8..open ur slideout keyboard and put ur screen in landscape mode vmanually..then start igo8..this should work and the program should open like normal because ur phone is alrdy in landscape mode before u start the program...#2 if that doe s work u may need to go to settings and turn ur screen to landscape mode everytime u want to start igo8..which will be a pain but atleast u get it to work..ur gonna need to adjust ur sys.txt settings and put landscape mode in the text..
people having tts problems u need to have the right audio folder in the root igo8 folder with the correct "EN" files that come with tts..theres a perfect site for this that will solve all of ur igo8 problems but u guys gotta find it urselves..the first pa4rt of the address is ppc the rest if "blank" cant use that word here in xda so search for ppc"blank".org and go to gps section ull solve all ur problems.

This version "iGO8.3.2.80621" works great on my T-Mo HTC TP2.

lorin.bute said:
This is what worked for me after half a day of trying different settings:
[folders]
app="%SDCARD%/iGO8"
save="%SDCard%/iGO8/save"
Click to expand...
Click to collapse
Thank you! your settings worked for me perfectly!

Hi,
I got the the 800 x 480 working properly on either portrait and landscape only. I can't seem to be able to change orientation to 800 x 480 as I please. It must be the sys.txt is either setting the resolution to portrait only, or landscape only. Is it just me having this issue ?

Friendstream.apk

anyone have a linky they can provide?

Asus P835 IGO08 finally works

Hi all,
finally after some time we were able to launch IGO08 on Asus P835.
But some difficulties still exists.
Requirements:
- older IGO8 version 8.0.0.41506 is working
- IGO VGA mode only
- no automatic landscape mode, default is always portrait (is neccessary to force landscape orientation before igo launching)
- gless driver only, as original DDI.DLL is partially defective. As Asus didnt pay enough attention to this device.
GPS device is operating on COM2, baudrate 57600.
Big thanks to my IGO master friend "Tomsoft".
See for sys.txt setting :
[folders]
app="my storage/igo8"
[device]
;type="asus"
[interface]
resolution_dir="320_240"
screen_x=640
screen_y=480
maxzoom2d=6000000
show_exit=1
mapfontscale=160
popup_info=1
vga=1
[rawdisplay]
class="rlandscape"
screen_x=640
screen_y=480
driver="GLESS"
;autoconfig=1
stretch=1
highres=1
[debug]
skip_eula=1
disable_outlookpoi=1
sound_q_length=200
queue_length=200
;show_performance=1
;show_device_type=1
;show_rawdisplay_info=1
[sound]
sound_q_length=200
queue_length=200
Click to expand...
Click to collapse

Fall detection

I do stuff at moderate heights--wiring on a ladder, aiming an antenna on the roof, whatever, and I like the idea of 'fall detection' popularized on Apple watches.
Fall detection apps promise to detect a hard fall followed by inactivity. That sequence is supposed to start a buzzing and alert tone on the watch and simultaneously display a message on the screen demanding the wearer respond. If the wearer responds then the fall detection event is cancelled. Otherwise, the app calls for help. Simple, right?
I love the concept but I'm a Google guy & switching to an iPhone's as appealing to me as binge-watching 'Sesame Street'. So I was excited last summer to see that hardware leader Samsung was building a watch and that feature was imminent. But the feature never came, a year after the watch's introduction, until now. Sunday Samsung's tech support said 'fall detection' is activated on the Samsung Galaxy Watch Active2, so I bought one.
But is it activated? I can find no mention of the feature in literature, online or in the watch's settings. Can fall sensitivity be adjusted? Alert tone? Time of alert before calling? On activation, what number does the app call? What message does it play? Is there an option for calling a 2nd responder, a 3rd? Perhaps a neighbor, co-worker, family member?
Does anybody else with one of these watches think Samsung is lying? And Sprint, too, 'cause after I couldn't find 'fall detection' info anywhere else I went to a Sprint Store and a quizzed a rep there--she says the feature is active.
I only bought the watch for this one, most useful, simple-as-hell feature. Did I f--k up?

I returned the Samsung Galaxy Watch Active2 today. Despite assurances from a Samsung rep and a local Sprint sales-babe that the SGWA² does fall detection, I couldn't find anything about it in Settings or anything positive written about it.
And, I've been reading this site for years and I'm convinced that, if such a feature existed, you guys would know all about it and figure out how to hack it.
I replaced the SGWA² with Apple's latest watch, the 5, a good piece of hardware but not great because Apple requires watch users to have an iPhone. So besides returning the SGWA² I traded my spectacular Samsung Galaxy Note 10+ for the cheapest new iPhone, the SE 2020.
It's my first Apple product since I sent my Apple Lisa in for repairs, 30 years ago. (I wonder if they are about done with that?)
The watch really is good but changing from the state-of-the-art GN10+ to an iPhone is like trading a Ferrari for a Chevette. Oh, well...

No idea, never installed nor tested...
Best Regards

After this:
https://www.sammobile.com/news/galaxy-watch-3-features-gesture-control-fall-detection/
And after checking this Plugin... decompiled...
Code:
"Show Fall Detection Dialog in first time"
"Primary contact is Exist. move to Send Fall Detection Page"
I've checked short SM-R840 Firmware again... only the old ATF3...
Code:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<manifest xmlns="http://tizen.org/ns/packages" [COLOR="Red"][B]api-version="5.5"[/B][/COLOR] package="com.samsung.fdam" version="2.0.3">
<label>fdam</label>
<description>[COLOR="Red"][B]fall detection[/B][/COLOR] audio message</description>
<profile name="wearable"/>
<ui-application appid="com.samsung.fdam" auto-restart="false" effectimage-type="edj-default" exec="fdam" hw-acceleration="on" indicatordisplay="false" launch_mode="caller" mainapp="true" multiple="false" nodisplay="true" portrait-effectimage="res/edje/fake_image.edj" process-pool="true" taskmanage="false" type="capp">
<label>fdam</label>
<label xml:lang="en-us">fdam</label>
<icon>fdam.png</icon>
<category name="com.samsung.wmanager.WATCH_APP"/>
<metadata key="http://developer.samsung.com/tizen/metadata/support-mode" value="ultra-power-saving"/>
<metadata key="http://developer.samsung.com/tizen/metadata/support-mode" value="screen-reader"/>
<metadata key="http://developer.samsung.com/tizen/metadata/support-mode" value="cool-down"/>
</ui-application>
<ui-application appid="com.samsung.fdam-test" exec="fdam-test" multiple="false" nodisplay="true" taskmanage="true" type="capp">
<label>fdam-test</label>
<icon>fdam-test.png</icon>
We can't use it... for now as Tizen 5.5 "required"...
Best Regards

adfree said:
After this:
https://www.sammobile.com/news/galaxy-watch-3-features-gesture-control-fall-detection/
And after checking this Plugin... decompiled...
Code:
"Show Fall Detection Dialog in first time"
"Primary contact is Exist. move to Send Fall Detection Page"
I've checked short SM-R840 Firmware again... only the old ATF3...
Code:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<manifest xmlns="http://tizen.org/ns/packages" [COLOR="Red"][B]api-version="5.5"[/B][/COLOR] package="com.samsung.fdam" version="2.0.3">
<label>fdam</label>
<description>[COLOR="Red"][B]fall detection[/B][/COLOR] audio message</description>
<profile name="wearable"/>
<ui-application appid="com.samsung.fdam" auto-restart="false" effectimage-type="edj-default" exec="fdam" hw-acceleration="on" indicatordisplay="false" launch_mode="caller" mainapp="true" multiple="false" nodisplay="true" portrait-effectimage="res/edje/fake_image.edj" process-pool="true" taskmanage="false" type="capp">
<label>fdam</label>
<label xml:lang="en-us">fdam</label>
<icon>fdam.png</icon>
<category name="com.samsung.wmanager.WATCH_APP"/>
<metadata key="http://developer.samsung.com/tizen/metadata/support-mode" value="ultra-power-saving"/>
<metadata key="http://developer.samsung.com/tizen/metadata/support-mode" value="screen-reader"/>
<metadata key="http://developer.samsung.com/tizen/metadata/support-mode" value="cool-down"/>
</ui-application>
<ui-application appid="com.samsung.fdam-test" exec="fdam-test" multiple="false" nodisplay="true" taskmanage="true" type="capp">
<label>fdam-test</label>
<icon>fdam-test.png</icon>
We can't use it... for now as Tizen 5.5 "required"...
Best Regards
Click to expand...
Click to collapse
afaik, FD is developed , but may be failed testing or need to be tuning, so it doesn't come as plan, I guess.

Oh...
FDAM in GW3 Firmware is Tizen 5.5 API...
But in FT40 ATH1 it is fully Tizen 4.0.0.6
...
I will later upload...
As still no idea how many apps need to run this feature..
Code:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<manifest xmlns="http://tizen.org/ns/packages" api-version="[COLOR="Green"][B]4.0.0.6[/B][/COLOR]" package="com.samsung.fdam" version="1.0.14">
<label>fdam</label>
<description>[B]fall detection[/B] audio message</description>
<profile name="wearable"/>
<ui-application appid="com.samsung.fdam" auto-restart="false" effectimage-type="edj-default" exec="fdam"
.
.
.
Best Regards
Edit 1.
Untested...
No idea how many parts needed to have full Fall Detect..

adfree said:
Oh...
FDAM in GW3 Firmware is Tizen 5.5 API...
But in FT40 ATH1 it is fully Tizen 4.0.0.6
...
I will later upload...
As still no idea how many apps need to run this feature..
Code:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<manifest xmlns="http://tizen.org/ns/packages" api-version="[COLOR="Green"][B]4.0.0.6[/B][/COLOR]" package="com.samsung.fdam" version="1.0.14">
<label>fdam</label>
<description>[B]fall detection[/B] audio message</description>
<profile name="wearable"/>
<ui-application appid="com.samsung.fdam" auto-restart="false" effectimage-type="edj-default" exec="fdam"
.
.
.
Best Regards
Edit 1.
Untested...
No idea how many parts needed to have full Fall Detect..
Click to expand...
Click to collapse
C:\Users\user\Downloads\sdb2260-20200618T081348Z-001\sdb2260\sdb\data\tools>sdb install com.samsung.fdam.tpk
pulled com.samsung.fdam.tpk 100% 147KB
1 file(s) pulled. 0 file(s) skipped.
com.samsung.fdam.tpk 260 KB/s (150581 bytes in 0.564s)
path is /opt/usr/home/owner/apps_rw/tmp/com.samsung.fdam.tpk
__return_cb req_id[1] pkg_type[tpk] pkgid[com.samsung.fdam] key[start] val[install]
__return_cb req_id[1] pkg_type[tpk] pkgid[com.samsung.fdam] key[install_percent] val[9]
__return_cb req_id[1] pkg_type[tpk] pkgid[com.samsung.fdam] key[install_percent] val[12]
__return_cb req_id[1] pkg_type[tpk] pkgid[com.samsung.fdam] key[install_percent] val[15]
__return_cb req_id[1] pkg_type[tpk] pkgid[com.samsung.fdam] key[install_percent] val[18]
__return_cb req_id[1] pkg_type[tpk] pkgid[com.samsung.fdam] key[install_percent] val[21]
__return_cb req_id[1] pkg_type[tpk] pkgid[com.samsung.fdam] key[install_percent] val[25]
__return_cb req_id[1] pkg_type[tpk] pkgid[com.samsung.fdam] key[error] val[-12] error message: :Non trusted certificate is used. Register valid certificate:<-32>
__return_cb req_id[1] pkg_type[tpk] pkgid[com.samsung.fdam] key[end] val[fail]
processing result : Check certificate error [-12] failed
spend time for pkgcmd is [1738]ms
rm: remove write-protected regular file `/opt/usr/home/owner/apps_rw/tmp/com.samsung.fdam.tpk'?

Thanx.
Internal preinstalled Apps have special Cert...
I was never able to identify how this exactly work.
So I can only bypass by resign... Signing again.
Something like this:
https://forum.xda-developers.com/smartwatch/gear-fit/howto-sign-sideload-tizen-applications-t3639793
Best Regards

adfree said:
Thanx.
Internal preinstalled Apps have special Cert...
I was never able to identify how this exactly work.
So I can only bypass by resign... Signing again.
Something like this:
https://forum.xda-developers.com/smartwatch/gear-fit/howto-sign-sideload-tizen-applications-t3639793
Best Regards
Click to expand...
Click to collapse
sorry not able to understand ...........poor knowledge .... i guess we just need to wait for 5.5 to come

Only short tested on my SM-R760...
Resigned...
Installed...
Code:
D:\SDB\SDB260>sdb shell
sh-3.2$ launch_app com.samsung.fdam
... successfully launched
sh-3.2$ launch_app fdam-test
... launch failed
sh-3.2$ launch_app com.samsung.fdam-test
... successfully launched
Attached is what I was able to see...
Best Regards

@adfree any way to do with my own cert?
Or is it about root stuff?