Hi,
I use iGO8.3.2.64873 on WM6.1 with follow sys.txt:
[folders]
app="%SDCARD%/iGO8"
[sound]
mute_os_key=1
use_os_volume=0
ding=0
[route]
correctness=90
[device]
sdcard_dsk_num=7
[interface]
maxzoom2d=6000000
show_exit=1
show_minimize=0
skin="ui_igo8"
resolution_dir="480_800"
maxzoom2d=6000000
screen_x=480
screen_y=800
vga=1
wide=1
recalc_voice=0
mapfontscale=200
drive_carefully=0
popup_info=1
laneinfo_signpost_enabled=1
shutdown_time=0
show_orientation=1
defaultzoom3d=40
[rawdisplay]
highres=0
autoconfig=1
screen_x=480
screen_y=800
class="auto"
driver="GDI"
[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
skip_exit_numbers=0
announce_exit_direction=1
[3d_config]
disable_roadsign_navigation_mode=0
roadsign_lines_per_screen=18
rotated_roadsigns=0
[3d]
show_guidance_arrows=1
show_guidance_strip=1
[map]
2dheadup=1
show_oneway=1
3d_max_tiltlevel=8900
3d_default_tiltlevel=8900
map_mode="3D"
show_labels=1
textured_poly=1
3d_scale_carmodel=1
3dcarsizemin=3000
3dcarsizemax=4000
3dcarsizemul=10000
[feature]
signpost_coloring=1
[smartzoom]
restore_smartzoom_on=1
enabled=1
enabled2d=1
minangle=70
maxangle=81
[msnd]
enabled=0
[timezone]
sync_os_timezone=0
reset_os_timezone=0
[warning]
speedcam_visualtype=1
speedcam_soundtype=2
speedcam_snap_distance=200
speedcam_max_lookahead=600
speedcam_maxdistance_from_road=10
[navigation]
skip_grab_viewchanging=1
sim_speed_factor=3
show_current_city=1
show_countrychange=1
[debug]
sound_q_length=200
queue_length=200
disable_outlookpoi=0
show_oneway=1
show_speed_limit=1
skip_eula=1
enable_roadshadow=1
cache=2048
reserve_memory=2000000
tts_min_ready_wav=1
tts_getaway_time=100
tts_expected_engine_delay=1400
supress_trivial_left=1
supress_trivial_right=1
mute_os_key=1
screen_calibration=1
lang_registry_2006=1
bringtotop_afterresume=1
enable_roadsign=1
show_gps_pos=1
show_oneway_3d=1
show_lane_info=1
show_signpost=1
show_arrows_on_route=1
I installed newest data.zip and branding.zip (v9c)
most from my Problem was fixed after but i have a new one now
I copy the speedcam.txt on folder -> /content/spedcam. check folder iGO8 convert that -> ok
I can see the speed cams on maps but iG08 don't warn me.
I copy the audio files to -> igo8/audio but see only the pictures on navi and don't warning tones. Is my sys.txt wrong? or missing any audio oder voice files?
regards
You only get an audible warning if you're going over the speed limit I think.
The warnings are in the "Speed Camera" settings page. This page however only appears when there is a GPS lock.
i cant see Speed camera settings...
Where can i found this?
Settings->Warnings cant see any speed cam setting... may be wrong sys.txt?
Gozengo said:
i cant see Speed camera settings...
Where can i found this?
Settings->Warnings cant see any speed cam setting... may be wrong sys.txt?
Click to expand...
Click to collapse
i found: Speedcam settings are active if gps signal are available...
Can you please tell me where I could find the newest data.zip and branding.zip (v9c).
Thanks
BC
i been searching and found that the version you are using is the only version that i could use with the jensen nav101 and i was wondering if you or anybody could tell me exactly how to install this or point me to the right spot to find this cause i tried every thing and only getting the message "program database cannot be found"
guys, please, read with full attention, this can help us all.
what about we working together to explain each of the lines in the sys.txt, some of them are self-explanatory but most of them aren't.
this would be extremely helpful for newbies and not-too-newbies.
the reason is that i realized that everytime someone posts a new sys.txt people will try it and in the process, some features that were enabled previously will disappear or something new will come up that will get us freaking out. specially because it seems that every new sys.txt posted here has a bunch of new parameters.
everyone wants the best settings to suit their needs and the best is if they could achieve that themselves by knowing what they are doing.
i'd like everyone to contribute, don't be afraid to be wrong, try and if it's not right someone else will fix. just copy, paste and edit the bottom sys.txt with the explanation of each line really replacing the ;???????????? for what you think this line will do.
I'm using the sys.txt posted by andrewpmoore with some add-ins found in this thread. I deleted the explanations in the original sys.txt. i just found that although saying "makes map drawing a lot faster" will make me think that it really does what it says, however it still won't say exactly what it is and what are its parameters.
The tags in blue were added by me, if you think they're incorrect, please correct me.
>>>Update:
Added more lines found in other examples as well as some info provided by Shetlander.
V.4 - houston, we have a problem!
ok, the sys.txt file now features 14k which is bigger than a post could hold.
and to show it with text formatting it would take other 5k or more, so it was impossible to put it here.
please download the zip file.
in it, you'll find the sys.txt in normal text-only, in word 2003 and in excel 2003.
the reason i added a version in excel is cause it's much easier to edit, sort, add and delete comments in batches.
please have a go.
recalc_voice=0 Supposed to disable the annoying "route recalculation" voice.
mapfontscale=200 I think its to do with the size of road names etc on the map.
drive_carefully=0 ;Disable the voice "drive carefully"
skin="ui_igo8" ;????????????
;resolution_dir="800_480" ;Tells the program which directory the ui files are in. I think pointless if you use - autoconfig=1 ;It will make iGo work with TouchHD native rotation.
auto_nightmode=0 ;Stops the prog switching to nightmode automatically
;screen_x=800 ;????????????
;screen_y=480 Tells the prog the dimension of x & y of the screen, again I think irrelevant if you use autoconfig.
show_oneway_3d=1 ; 3d arrows in one way streets ;Draws 3d arrows in the direction of travel on one way streets
show_oneway=1 ; show one way on or off ;?Will either show on not show one way streets.
Shetlander said:
recalc_voice=0 Supposed to disable the annoying "route recalculation" voice.
mapfontscale=200 I think its to do with the size of road names etc on the map.
drive_carefully=0 ;Disable the voice "drive carefully"
skin="ui_igo8" ;????????????
;resolution_dir="800_480" ;Tells the program which directory the ui files are in. I think pointless if you use - autoconfig=1 ;It will make iGo work with TouchHD native rotation.
auto_nightmode=0 ;Stops the prog switching to nightmode automatically
;screen_x=800 ;????????????
;screen_y=480 Tells the prog the dimension of x & y of the screen, again I think irrelevant if you use autoconfig.
show_oneway_3d=1 ; 3d arrows in one way streets ;Draws 3d arrows in the direction of travel on one way streets
show_oneway=1 ; show one way on or off ;?Will either show on not show one way streets.
Click to expand...
Click to collapse
i will update it to the first post, but just occured to me the mapfontscale=200 is more for the street names showing on the map (the ones that follow the road while you move).
thanks for the input, mate.
thanks to PedroDaGr8 i am bringing to you "some more"
this are the options/possibilities existing for the different settings in the sys.txt and some explanations of what they are and what they are doing.
look for the comments after the ; but most of them are self explanatory.
[2d]
[3d]
[3d_config]
[bluetooth]
[config]
[debug]
[defaults]
[device]
[feature]
[folders]
[gps]
[interface]
[itiner]
[kml]
[loading]
[local]
[map]
[msnd]
[mydata]
[mydata.tracks]
[navigation]
[other]
[phone]
[poi]
[power]
[rawdisplay]
[route]
[screen]
[settings]
[smartzoom]
[speedcam]
[sound]
[timezone]
[tmc]
[tripcomputer]
[tts]
[usb]
[warning]
Code:
[2d]
guidancearrow_disappearlevel=600
guidancearrow_maxshift=12
minguidancearrowsize=20
minguidancearrowsize_zoomlevel=1200
maxguidancearrowsize=65
maxguidancearrowsize_zoomlevel=0
[3d]
3d_tmc_road_extra_width=200 ;
building_camera_distance_far=500
building_camera_distance_medium=50
building_camera_distance_near=10
disable_3d_labels=0 ;
fade_distance_for_car=50
fade_distance_for_guidance_arrow=500
guidancearrow_contour ;
guidancearrow_first_size=1.1 ; [COLOR="RoyalBlue"][I]scale of 1st arrow[/I] [/COLOR]
guidancearrow_first_alpha=24 ; [COLOR="RoyalBlue"][I]transp of 1st arrow[/I] [/COLOR]
guidancearrow_second_size=0.8
guidancearrow_second_alpha=12
guidancearrow_skew ;
guidancearrow_thickness ;
guidancearrow_width ;
guidancearrow_zoomfactor ;
max_poly_distance_lower
max_poly_distance_upper
max_poly_segments_shown
max_track_distance_lower
max_track_distance_upper
max_track_segments_shown
min_poly_distance
min_poly_segments_shown
min_track_distance
min_track_screen_ratio
min_track_segments_shown
road_clip_plane_camera_delta=50 ;
road_clip_plane_to_camera_height= ;
show_guidance_strip=1
show_guidance_arrows=1
track_screen_ratio
use_all_building_textures=0 ; not?
[3d_config]
disable_roadsign_navigation_mode=1
roadsign_lines_per_screen=12
rotated_roadsigns=1
[bluetooth]
send_showphoneui_on_dial=1
[config]
autoset2donmap=1
autoset3doncockpit=1
hideroadaltname=1
overspeedrewarnbelow=1
SafeModeMinSpeed=40
[debug]
autosave=1
bringtotop_afterresume=1
buildneworderlist=1
cache=2048
compass_type=2
disable_3d=0 ;[COLOR="RoyalBlue"][I]disables 3d buildings and roads [/I][/COLOR]
disable_outlookpoi=1
double_pixel_mode=2 ;[I]3d mode fastdraw[/I]
doublepixel_stable_frame_time=500 ;[COLOR="RoyalBlue"][I]time in ms before leavin fastdraw[/I][/COLOR]
earth=1
enable_buildings=1
enable_landmark_occlusion=1
enable_roadshadow=1
enable_roadsign=1
fov=40
gnome_dem_files=1
hide_itiner_crossing=1
join_dual=0
lang_registry_2006=1loop_sim=1
loop_sim=1
max_memory=
mute_os_key=1 ; [COLOR="RoyalBlue"][I]a value of 1 mutes the click noise from the OS when touching a touchscreen[/I][/COLOR]
no_file_cache="0"
nortc=1 ; [COLOR="RoyalBlue"][I]RTC = real time clock aka the devices internal clock[/I][/COLOR]
pin_sets_start=1
poi_labels=1
replay_tmc=1
reserve_memory
run_on_mio_mantas=1
screen_calibration=1
show_arrows_on_route=1 ;[COLOR="RoyalBlue"][I] little arrows in direction of route [/I][/COLOR]
show_device_type=0
show_gps_pos=1 ;[COLOR="RoyalBlue"] [I]this works again ;O) [/I][/COLOR]
show_lane_info=1
show_ltn=1
show_multinode_maneuvers=1
show_oneway_3d=1 ; [COLOR="RoyalBlue"][I]3d arrows in one way streets [/I][/COLOR]
show_oneway=1 ; [COLOR="RoyalBlue"][I]show one way on or off [/I][/COLOR]
show_pedestrian=1
show_performance=0 ;[COLOR="RoyalBlue"][I] cpu / mem / whatever bars on top of screen[/I] [/COLOR]
show_plural=1
show_poi_areas=1
show_poi_boundingrects=1
show_priority_maneuvers=1
show_prohibited_maneuvers=0
show_rawdisplay_info=0 ; [COLOR="RoyalBlue"][I]handy for seeing what igo chooses as display driver [/I][/COLOR]
show_residentonly=0
show_speed_limit=1
show_turn_penalty=1
show_signpost=1
sim_speed_factor_max=8.0
skip_eula=1 ;[COLOR="RoyalBlue"][I]skips the End User License Agreement at start-up (only happens on first run anyways)[/I][/COLOR]
slowsim=1
smart_2d=1
sound_q_length=200
speedcam_enabled=1
split_dual=0
strap_waypoints=1
supress_highway_enter=0
supress_straight=0
supress_trivial_left=0
supress_trivial_right=0
tmc_all_stations=1 topmost=1
traincrossing=1
tts_expected_engine_delay=1400
tts_getaway_time=200
tts_min_ready_wav=1
[defaults]
mainroadness=60
shortessness=50
simplificationness=40
[device]
type="MIOC210" ;[COLOR="RoyalBlue"][I] force device type [/I][/COLOR]
typeid=3 ;In Igo8.exe: [COLOR="RoyalBlue"][I]MIO device detected, use KernelIOControl method
[/I][/COLOR]
[feature]
text_guidance=1
signpost_coloring=1
tmc_event_coloring=1
tmc_traffic_side=1
[folders]
app="%SDCARD%/iGO8" ; [COLOR="RoyalBlue"][I]change this if applicable [/I][/COLOR]
sdcardpath="\Storage Card"
exe=""
data="\Storage Card\igo" ;[COLOR="RoyalBlue"][I]custom,save [/I][/COLOR]
content="\Storage Card\igo\CONTENT"
textures="custom"
models="custom"
secondary_root="IPAQ\NAV"
[gps]
background_navigation=1
logging=0 ; [I][COLOR="RoyalBlue"]see also mydata.tracks [/COLOR][/I]
port=2
baud=38400
source="nmea"
disable_advanced=0
default_longitude=2.294760 ;[COLOR="RoyalBlue"][I]starting postion on the map before GPS is found.[/I][/COLOR]
[interface]
angleoffset=
autotilt=0
autotilt_minzoom3d=40
autotilt_maxzoom3d=1000
autoscroll_on_click=1
default_poi_icon="Contacts" ;
defaulttilt3d=75000
defaultzoom2d=1000
defaultzoom3d=500
disable_3dstick_labels=1 ;
drive_carefully=0
empty_favorites=1
exit_on_restart=0
laneinfo_signpost_enabled=1
mapfontscale=130 ;[COLOR="RoyalBlue"] [I]for 2d and 3d map[/I][/COLOR]
maxzoom2d=60000 ; [COLOR="RoyalBlue"][I]zoom out level (disabled get you into space ;O) [/I][/COLOR]
minzoom2D=40 ; [COLOR="RoyalBlue"][I]zoom in level 2d[/I] [/COLOR]
minzoomglobe=100000
msgbox_max_width=50
newalignment=1 ;
poi_show_all_btn=1
popup_info=1
resolution_dir="320_240" ; [COLOR="RoyalBlue"][I]tells what resolution to use in a multires skin[/I][/COLOR]
screen_snap_distance=40
showselection=1
show_exit=1 ; [COLOR="RoyalBlue"][I]obvious [/I][/COLOR]
show_gps_config=1
show_minimize=1
show_orientation=1
show_timezoneslider=1 ;
show_tmc_config=1
show_zoombar=1 ; [COLOR="RoyalBlue"][I]also see zoomscale_disappearing [/I][/COLOR]
shutdown_time=0
skin="ui_igo8"
spec_fav_count=4
theme="skin\igo8_plus.zip"
use_big_lang_flag=1
use_spec_fav=1
waypoint_list_ignore_autosource=1
vga=1
Zoom2dpercent=
[itiner]
show_only_ahead_of_car=1
[kml]
default_icon=1
[loading]
loading_bmp="loading.jpg"
progressbar_bmp="loading_progressbar.bmp"
progressbar_x=85
progressbar_y=134
show_progressbar=0
show_statustext=1
supress_straight=0
supress_highway_enter=0
supress_trivial_left=0
supress_trivial_right=0
text_align=1 ;[COLOR="RoyalBlue"][I]Left=0,Center=1,Right=2 and Justify=3[/I][/COLOR]
text_fontcolor=xFFFFFF
text_fontsize=30
text_w=600
text_x=100
text_y=400
traincrossing=1
[local]
; [COLOR="RoyalBlue"][I]Date Format: To select your desired format, delete the ; infront of the format you want and ; in front of the rest (or just delete all of the other lines)[/I][/COLOR]
; Dateformat = 0; YYYY-MM-DD
; Dateformat = 1; AAAA.MM.GG
; Dateformat = 2; YYYY / MM / DD (DEFAULT)
; Dateformat = 3; YYYY-MM-DD
; Dateformat = 4; AAAA.GG.MM
; Dateformat = 5; YYYY / MM / DD
; Dateformat = 6; DD-MM-YYYY
; Dateformat = 7; DD.MM.YYYY
; Dateformat = 8; DD / MM / YYYY
; Dateformat = 9; MM-DD-YYYY
; Dateformat = 10; MM.GG.AAAA
; Dateformat = 11; MM / DD / YYYY
[map]
2dheadup=1
3d_brunnel_shutdown=
3d_buildings=1
3d_buildings_distance=2
3dcarsizemin=5000
3dcarsizemax=10000
3dcarsizemul=30000
3d_dem=1
3d_dem_detail=2
3d_landmarks=1
3d_max_tiltlevel=7500
3d_max_zfar=500
3d_max_zoomlevel=2000
3d_min_zoomlevel=40
3d_roads=1
3d_scale_carmodel=1
3d_tunnels=1
alternative_roadnames=0
auto_nightmode=0 ; [I]see also nightmode [/I]
cross_border_routes=1
follow_gps=1
inertia_on_map_move=1 ; [COLOR="RoyalBlue"][I]sets autoscroll on the map, tends to be buggy though sometimes doesn't stop.[/I][/COLOR]
map_mode="3D"
maxFovRatioForPoly=8
maxPolyDistances0 = 2000
maxPolyDistances1 = 3000
maxPolyDistances2 = 4000
maxPolyDistances3 = 5000
maxTrackDistances0 = 2500
maxTrackDistances1 = 3500
maxTrackDistances2 = 4500
maxTrackDistances3 = 5500
minPolyDistances0 = 500
minPolyDistances1 = 500
minPolyDistances2 = 500
minPolyDistances3 = 500
minTrackDistances0 = 500
minTrackDistances1 = 500
minTrackDistances2 = 500
minTrackDistances3 = 500
roadblockicon_maxzoom=2000
rotation="0"
shields=1
show_labels=1 ;
show_oneway=1 ; [COLOR="RoyalBlue"][I]turns on or off the arrows showing one way streets[/I][/COLOR]
stop_rotate_on_map_move=1
terrain_in_2d=0
textured_poly=1
viewpreset_front1="30,100,7200,10"
viewpreset_front2="140,7000,6000,10"
viewpreset_front3="140,7000,6000,10"
viewpreset_top="600,50000,225,10"
zoomscale_disappearing=1 ;[COLOR="RoyalBlue"] [I]works with show_zoombar[/I][/COLOR]
and some more:
Code:
[msnd]
; [I][COLOR="RoyalBlue"]How does msdn work? Movies, Weather, Petrol prices, etc..... [/COLOR][/I]
msnd.start=0
[mydata]
favicon=""
max_favorites=16
max_histories=40
num_favicons=7
[mydata.tracks]
auto_track_visible=1
record_auto_track=0
tracklog_folder=""
[navigation]
autoreplan_action="AUTO"
gps_pos_to_road=1
show_countrychange=1
show_current_city=1
sim_speed_factor=1.0 [COLOR="RoyalBlue"][I];Determines how fast the simulation runs, 1=realtime[/I][/COLOR]
skip_grab_viewchanging=1
[other]
demo_mode=1
[phone]
driver="TAPI"
exe_path="\Windows\cprog.exe"
win_name="Phone"
[poi]
enable_pois_before_080217=1 ;[COLOR="RoyalBlue"][I]080217 is the date can be changed as needed[/I][/COLOR]
multipoi=1 ;[I]allows you to use more than one set of POIs at a time (will show duplicates though)[/I]
[power]
backlight_day=100
backlight_night=54
backlight_slow_api=1
backlight_sync_with_OS=1
battery_warning_limit=10
powermgm_state=0
power_off_mode=1
power_off_timeout=300
skip_resume_process=1
skip_suspend_process=1
[rawdisplay]
class="landscape" ; [COLOR="RoyalBlue"][I]adjusts the orientation, other options are rlandscape, portrait, square,wide [/I][/COLOR]
driver=GX ;GDI or GX
highres=0
screen_x=320
screen_y=240
stretch=0
[route]
allow_carpool=0
allow_charge=1
allow_ferry=1
allow_highway=1
allow_special=0
allow_unpaved=0
allow_uturn=1
correctness=80 ; [I][COLOR="RoyalBlue"]we used to have a slider for that[/COLOR][/I]
cross_border_routes=1
fast_car_multiplactor
fast_car_speed
motorcycle_multiplactor
motorcycle_speed
planned_route_weight=7
route_type="ECO"
scenic_highway_weight=4
scenic_scenic_weight=2
slow_car_multiplactor
slow_car_speed
tmc_weight=6
vehicle_type="truck"
[screen]
current_background="default.bmp"
focus=1
focus_activator_key
focus_color
focus_followlinks
focus_halign
focus_sprite
focus_type=2
focus_valign
focus_list_keydown
focus_list_keyleft
focus_list_keyright
focus_list_keyup
focus_list_move_before_scroll
menu_animation=0
nightmode=0
[settings]
accident_map=1
accident_panel=1
accident_recalc=0
closed_map=1
closed_panel=1
closed_recalc=0
closures_map=1
closures_panel=1
closures_recalc=0
congestion_map=1
congestion_panel=1
congestion_recalc=0
danger_map=1
danger_panel=1
danger_recalc=0
heavy_map=1
heavy_panel=1
heavy_recalc=0
invalid_map=1
invalid_panel=1
invalid_recalc=0
police_map=1
police_panel=1
police_recalc=0
roadworks_map=1
roadworks_panel=1
roadworks_recalc=0
weather_recalc=0
weather_map=1
weather_panel=1
[smartzoom]
autozoom_address=100
autozoom_coord=200
autozoom_cos=200
auto_follow_on=1
auto_follow_time=10
auto_smartzoom_time=8
default_visibility_altitude=4000
enabled=1
enabled2d=1
maxangle=85
maxzoom=250
minangle=8
minzoom=60
overview=0
overview_distance=20000
overview_zoomlevel=10000
restore_smartzoom_on=1
use2d=1 ;[COLOR="RoyalBlue"][B]use2d is to use separate smartzoom for 2d and 3d. Once this is implemented in a UI it should be set to 1. [/B][/COLOR]
zoom_after_find=1
[speedcam]
disable="_SUI", "_GER", "_AUT"
enable_at_startup=1
speedcam_sound="!alert1"
usemio=-12,90,37,27
[sound]
auto_mute=0
ding=0
device_bps=
device_samplerate=
device_stereo=
dynamic_volume_maxspeed=100
dynamic_volume_minspeed=40
dynamic_volume_os_volume_max=255
dynamic_volume_type=1
dynamic_volume_voicemaxspeed=80
dynamic_volume_voice_volume_max=100
incomingcallsetting=0
queue_length=200
sound_volume=255
sound_muted=0
suspend_time=5 ;[I][COLOR="RoyalBlue"]timeout for wavedev to goto sleep [/COLOR][/I]
use_os_volume=1
voice_muted=0
voice_volume=255
[timezone]
auto_index=29
default_timezone=29 ; [I][COLOR="RoyalBlue"]GMT+1 amsterdam[/COLOR][/I]
index=29
manual_dst=0
reset_os_timezone=0
sync_os_timezone=0
sync_time=1
use_auto=1
[tmc]
auto_detour_calc=0
;announce_total_route=1
baud=38400
ignore_all_events=0
port="COM,1"
source="gns"
;[I][COLOR="RoyalBlue"]harman eten galik opentmc2 opentmc1 hyundai samsung amaryllo royaltek gns [/COLOR][/I]
[tripcomputer]
num_of_trips=4 ; default igo8 has only 3
[tts]
always_say_road_names=1
announce_exit_directions=1
announce_street_name=1
priority="HIGH"
skip_exit_numbers=0
tts_buffer=131072
tts_logics=3
[usb]
disable_on_startup=0
enable_on_shutdown=1
quitmap_msg_quits=0
[warning]
approach_beep_distances=200
approach_beep_sound="!sectionbeepB"
max_section_time=240
overspeed_sound= "!alert3" ; speedcam sound
pedestrian_warning=0
pedestrian_warning_threshold=10
section_beep_distance=200
section_beep_sound= "!sectionbeepA"
section_end_sound= "!sectionend"
section_start_sound="!sectionstartA"
speedcam_maxdistance_from_road=
speedcam_max_angle=20
speedcam_max_lookahead=400
speedcam_snap_distance=200
speedcam_soundtype=1
speedcam_visualtype=1
speedcam_warning=1
speedlimit_warning=1
speedlimit_warning_visual=1
speedlimit_warning_voice=1
speedwarn_alt_builtup_based=1
speedwarn_alt_limit
speedwarn_alt_tolerance
speedwarn_tolerance=110
speedwarn_alt_toltype
speedwarn_toltype
warn_distances=130:450,110:350,90:300,60:200,40:10 0 ;[B]These numbers are apparently in the format of Speed:Distance[/B].
An important setting for the Touch HD:
[device]
type="HTC Touch HD T8282"
I am using the latest iGO8 and I don't use an sys.txt?
niels_90 said:
I am using the latest iGO8 and I don't use an sys.txt?
Click to expand...
Click to collapse
are you absolutely sure about that? sys.txt is like the bible for iGo. it is where you can change almost everything in the app to suit your needs. if it's working without it you may be using the factory settings which are not optimal.
@everyone: guys, i'm nearly finished re-editing the sys.txt with all the additions provided and will update the post #2 later today.
@KukurikU: why some of the itens in the screen, sound and 3d have no parameters? an example is focus_activator_key, shouldn't it be focus_activator_key=NNN?
easyriider said:
An important setting for the Touch HD:
[device]
type="HTC Touch HD T8282"
Click to expand...
Click to collapse
This is very interesting. I have seen that some people are using type="Touch HD", some have even suggested using type="ALIAS XPERIA"
I looked in the latest "data file" that I could find, and under the subdirectory config\devices I found only one config file that relates directly to the Touch HD and it is called:
ALIAS_BLACKSTONE
I just started using this line type="ALIAS_BLACKSTONE" and with a ; in front of almost all of the entries in my sys.txt file to make them inactive. Everything is working great so far including landscape/portrait. I looked in the file and there wasn't much in it but I figure at least I actually found a file name that corresponded to the HD in the list.
Matterhorn said:
... I found only one config file that relates directly to the Touch HD and it is called:
ALIAS_BLACKSTONE
I just started using this line type="ALIAS_BLACKSTONE" and with a ; in front of almost all of the entries in my sys.txt file....
Click to expand...
Click to collapse
that is definitely an important info. using the default settings for a specific model would suit a lot of users.
sys.txt's main job is tweak the app to optimize the experience. editing it wisely would make the whole thing much better.
This is the contents of the ini file from the latest DATA.zip file for the Touch HD.
info_names="HTC Blackstone"
[device]
SDCard_dsk_num=7
[gps]
port = 4
baud = 9600
[rawdisplay]
highres=0
autoconfig=1
As you can see, the rawdisplay settings are the important ones to control the size of screen. My iGO8 uses a baud rate of 56000 so id rather not use the ini file.
SlakerBoi said:
are you absolutely sure about that? sys.txt is like the bible for iGo. it is where you can change almost everything in the app to suit your needs. if it's working without it you may be using the factory settings which are not optimal.
Click to expand...
Click to collapse
Yes i'm absolutely sure.
In version v8.3.2.64873 and lower you need a sys.txt where you need to tell iGO that it should use 800x480 graphics etc etc.. I am using v8.3.2.80621 and the only setting sys.txt contains is:
Code:
[interface]
show_exit=1
It automatically detects your device and configures itself. I am using it for a few weeks now and there is no need for adding settings because it's working perfect
I have a data.zip with in the map config/devices a file with the name "HTC Touch HD T8282.ini" with the following content:
info_names="HD"
[device]
SDCard_dsk_num=7
[gps]
port="4"
baud="57600"
[rawdisplay]
highres=0
autoconfig=1
driver="gdi"
[power]
backlight_manage_values = 1
backlight_manage_keys = 1
backlight_max = 10
backlight_min = 1
backlight_reverse = 0
backlight_key_bright_BA1 = "Brightness"
backlight_key_bright_AC1 = "ACBrightness"
backlight_key_bright_BA2 = "BacklightLuminanceLevel"
backlight_key_bright_AC2 = "ACBacklightLuminanceLevel"
backlight_key_timeout_BA = "BatteryTimeout"
backlight_key_timeout_AC = "ACTimeout"
backlight_key_ontap_BA = "BacklightOnTap"
backlight_key_ontap_AC = "ACBacklightOnTap"
backlight_key_on_BA = "OnOff"
backlight_key_on_AC = "ExtOnOff"
backlight_methods = 25
backlight_events = 3
[interface]
use_big_lang_flag=1
In sys.txt in version v8.3.2.80621, I only have:
[folders]
app="%SDCARD%/iGo8"
[device]
type="HTC Touch HD T8282"
(If you have installed iGO in the device memory it is important that you edit the sys.txt at that location instead of the sys.txt on the sdcard)
hi,
i've added all the new lines and the sys.txt file became way too big to fit in a post. it can be found in a zip file in doc, xls or txt.
it took me so long to post the additions simply because a few lines were making my blackstone crash and i had to work out which one.
as you can see in the files, a lot of lines are lacking explanation. please let's work on it a bit more, mates.
and thank you again for the inputs.
OK, If you want to stop the "route recalculation" voice, under [TTS] in your sys.txt file add = recalculate=0.
Ive just tried it this morning and it works fine.
Finally got rid of that annoying voice.
I have a strange problem.
The first time I try and search for an adress, I can use the
smart search funktion were letters greys out if there is no street adress
matching the previous letter.
But after I have closed a route, and try to search for a new adress, the letter "å or a" is automaticly pressed multiple times. I cant even go back and push another letter myselfe.
So far the only way to restore this is to resset user data.
Can this problem be solved by useing some command i the sys.txt file?
Ethania said:
I have a strange problem.
The first time I try and search for an adress, I can use the
smart search funktion were letters greys out if there is no street adress
matching the previous letter.
But after I have closed a route, and try to search for a new adress, the letter "å or a" is automaticly pressed multiple times. I cant even go back and push another letter myselfe.
So far the only way to restore this is to resset user data.
Can this problem be solved by useing some command i the sys.txt file?
Click to expand...
Click to collapse
are you sure this is not a bug in the version you're using? i have recently been to portugal where the words have accents such as çãâáàü and everything worked just fine. i'm still using the version 8.3.2.64873.
Ethania said:
I have a strange problem.
The first time I try and search for an adress, I can use the
smart search funktion were letters greys out if there is no street adress
matching the previous letter.
But after I have closed a route, and try to search for a new adress, the letter "å or a" is automaticly pressed multiple times. I cant even go back and push another letter myselfe.
So far the only way to restore this is to resset user data.
Can this problem be solved by useing some command i the sys.txt file?
Click to expand...
Click to collapse
i found the solution!
Add this to sys.txt
[device]
Type="ALIAS_TOUCH HD"
sdcard_dsk_num=7
The only problem I'm having is that iGO doesn't respond when I press the hardware sound buttons. Nothing happens..
I'm using the latest version with no sys.txt, but I used a lot of sys.txt earlier when I used older versons. And there was the same problem. I'm using custom roms. Maybe that's the problem, because when I used stock rom I didn't have the problem.
Anyone having a solution?
So you want to run TMC in iGO Primo on a HTC Touch HD? Here's how to do it.
These are the files in the Primo folder I think are relevant to getting TMC working;
iGO.exe v8.5.11.168090
atmc_ce.dll v8.0.0.49
avqtmc.dll v8.0.235.21
nnghal.dll v8.5.9.152270
tmcgps.dll v8.0.0.49
This is a copy of my sys.txt file, it's the complete list. Look for the TMC entries and add them to your sys.txt file. Note the sections in the sys file i.e. the [sections].
[device]
type="HTC Touch HD"
[folders]
tts_loq="\Storage Card\Primo\TTS_LOQ"
tts_nua_v5="\Storage Card\Primo\tts_nua_v5"
has_secondary_root=0
[interface]
show_exit=1
show_minimize=1
extra_settings=1
resolution_dir="800_480"
vga=0
shutdown_time=0
home="Acasa"
car="CAR"
maxzoom2d=6000000
defaulttilt3d=6900
show_gps_config=1
show_tmc_config=1
show_zoombar=1
show_tmc_eventlist=1
[dynamiccompressor]
compressor="1"
a0="56806"
thrs="24703"
ratio="8"
gain="8"
[rawdisplay]
highres=0
screen_x=800
screen_y=480
stretch=1
class=landscape
[screen]
preferred_orientation=2
[map]
3d_scale_carmodel="1"
3dcarsizemin="9500"
3dcarsizemax="15000"
3dcarsizemul="15000"
show_oneway="1"
tmczoommin=1
tmczoommax=40
tmczoommini=10
tmczoomsmall=5
[gps]
port=4
baud=57600
disable_advanced=0
;protocol="nmea"
set_messages=0
background_navigation=1
logging=0 ; see also mydata.tracks
[power]
skip_suspend_process=1
skip_resume_process=1
skip_suspend_process_all=1
skip_resume_process_all=1
power_off_mode = 0
power_off_timeout = 0
powermgm_state = 0
[sound]
ding=1
sound_q_length=200
queue_length=200
mute_os_key=1
pause_mp3_sooner=1
[other.fm_transmitter]
fmtx_ena
[warning]
speedcam_warning="1"
[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
skip_exit_numbers=2
[tmc]
saved_config_available="1"
saved_config_classname="NMEA_GPSTMC_ROYALTEK"
saved_config_portname="COM"
saved_config_port="9"
auto_tuning="1"
saved_last_tuning_mode="1"
You will need HyperGPS installed, configured and running before you start Primo. This install is free and can be found online. If you already use it with iGO 8 you don't have to do anything more. Just make sure it's running before starting Primo.
These are the settings I have for HyperGPS on the HTC Touch HD;
COM Port = 9
FM Band = CCIR 87.5-108MHz
Data output = TMC Data
Sound output = Speaker
Mute radio = Tuned sound
Log mode = Not Logged
Protocol = Royaltek
You will need to plug some headphones into the ear-jack. If you have HyperGPS running you will still hear sound coming from the handset even though the headphones icon appears on the display. This is required for the radio to pick up the TMC data. I use an old pair of headphones, I've cut the earpieces off the other end and then looped the wire so as to make it tidy but long enough in length to pick up TMC data over the radio (the headphones acts as an antenna for the radio).
You will then need to start Primo and go to the settings panel for Traffic. Enable the first two options and eventually you should start to see TMC data flow into the handset (you may need to restart Primo).
If it doesn't work it might be that you do not have a valid license file in the \Primo\license\ folder (.lic file).
Give it a go and let me know if you have any problems.
wsowka said:
So you want to run TMC in iGO Primo on a HTC Touch HD? Here's how to do it.
These are the files in the Primo folder I think are relevant to getting TMC working;
iGO.exe v8.5.11.168090
atmc_ce.dll v8.0.0.49
avqtmc.dll v8.0.235.21
nnghal.dll v8.5.9.152270
tmcgps.dll v8.0.0.49
This is a copy of my sys.txt file, it's the complete list. Look for the TMC entries and add them to your sys.txt file. Note the sections in the sys file i.e. the [sections].
[device]
type="HTC Touch HD"
[folders]
tts_loq="\Storage Card\Primo\TTS_LOQ"
tts_nua_v5="\Storage Card\Primo\tts_nua_v5"
has_secondary_root=0
[interface]
show_exit=1
show_minimize=1
extra_settings=1
resolution_dir="800_480"
vga=0
shutdown_time=0
home="Acasa"
car="CAR"
maxzoom2d=6000000
defaulttilt3d=6900
show_gps_config=1
show_tmc_config=1
show_zoombar=1
show_tmc_eventlist=1
[dynamiccompressor]
compressor="1"
a0="56806"
thrs="24703"
ratio="8"
gain="8"
[rawdisplay]
highres=0
screen_x=800
screen_y=480
stretch=1
class=landscape
[screen]
preferred_orientation=2
[map]
3d_scale_carmodel="1"
3dcarsizemin="9500"
3dcarsizemax="15000"
3dcarsizemul="15000"
show_oneway="1"
tmczoommin=1
tmczoommax=40
tmczoommini=10
tmczoomsmall=5
[gps]
port=4
baud=57600
disable_advanced=0
;protocol="nmea"
set_messages=0
background_navigation=1
logging=0 ; see also mydata.tracks
[power]
skip_suspend_process=1
skip_resume_process=1
skip_suspend_process_all=1
skip_resume_process_all=1
power_off_mode = 0
power_off_timeout = 0
powermgm_state = 0
[sound]
ding=1
sound_q_length=200
queue_length=200
mute_os_key=1
pause_mp3_sooner=1
[other.fm_transmitter]
fmtx_ena
[warning]
speedcam_warning="1"
[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
skip_exit_numbers=2
[tmc]
saved_config_available="1"
saved_config_classname="NMEA_GPSTMC_ROYALTEK"
saved_config_portname="COM"
saved_config_port="9"
auto_tuning="1"
saved_last_tuning_mode="1"
You will need HyperGPS installed, configured and running before you start Primo. This install is free and can be found online. If you already use it with iGO 8 you don't have to do anything more. Just make sure it's running before starting Primo.
These are the settings I have for HyperGPS on the HTC Touch HD;
COM Port = 9
FM Band = CCIR 87.5-108MHz
Data output = TMC Data
Sound output = Speaker
Mute radio = Tuned sound
Log mode = Not Logged
Protocol = Royaltek
You will need to plug some headphones into the ear-jack. If you have HyperGPS running you will still hear sound coming from the handset even though the headphones icon appears on the display. This is required for the radio to pick up the TMC data. I use an old pair of headphones, I've cut the earpieces off the other end and then looped the wire so as to make it tidy but long enough in length to pick up TMC data over the radio (the headphones acts as an antenna for the radio).
You will then need to start Primo and go to the settings panel for Traffic. Enable the first two options and eventually you should start to see TMC data flow into the handset (you may need to restart Primo).
If it doesn't work it might be that you do not have a valid license file in the \Primo\license\ folder (.lic file).
Give it a go and let me know if you have any problems.
Click to expand...
Click to collapse
add this
[tmc]
enable_subscription="1"
saved_config_available="1"
saved_config_classname="NMEA_GPSTMC_ROYALTEK"
saved_config_portname="COM"
saved_config_port="9"
saved_config_baud="38400"
auto_band_search_up="1"
auto_tuning="1"
My HTC HD work with this. Remove your tmc string.
Set HyperGPS com 9!
soso72 said:
add this
[tmc]
enable_subscription="1"
saved_config_available="1"
saved_config_classname="NMEA_GPSTMC_ROYALTEK"
saved_config_portname="COM"
saved_config_port="9"
saved_config_baud="38400"
auto_band_search_up="1"
auto_tuning="1"
My HTC HD work with this. Remove your tmc string.
Set HyperGPS com 9!
Click to expand...
Click to collapse
I'll give it a try
TMC primo 1.2 working
Hi,
I got TMC working on the Touch HD in primo 1.2 using HyperGPS.
Altough before I start primo 1.2 I have to reload the GPS Intermediate driver.
(External GPS Icon->Access-> Manage GPS Auto off -> OK, and External GPS Icon->Access-> Manage GPS Auto on -> OK) It looks like after using primo the GPSID doesn't work anymore for COM 9. The GPS on COM 4 allways works...
Any idea's
1) How to reload the GPSID using a script or something else.
2) What could be the problem here....???