Develop Bugs

igo8 htc touch pro 2

hi all ,
does any one know if igo8.3.2 works on this device?

Yep.
I use it without any problem in 800-400 and TTS.

sys.ini
how does your sys.ini looks like ?

http://forum.xda-developers.com/search.php
this link will have all answer of your questions....try it
[folders]
app="\SpeicherkartemSdcardWhatever\iGO8"
[interface]
maxzoom2d=6000000
show_exit=1
skin="ui_igo8"
resolution_dir="800_480"
maxzoom2d=6000000
screen_x=800
screen_y=480
vga=0
[device]
sdcard_dsk_num=7
[rawdisplay]
highres=0
screen_x=800
screen_y=480
class="landscape"
driver="GDI"

hebrew support
since you guys are more than helpfull i was wondering if touch pro 2 has hebrew support(not pdac or eyron..

[folders]
app="opslagkaart/iGO8"
[interface]
maxzoom2d=6000000
show_exit=1
popup_info=1
poi_show_all_btn=1
[rawdisplay]
highres=1
screen_x=800
screen_y=480
class="landscape"
[navigation]
sim_speed_factor=4.0
[debug]
show_oneway_3d=1
show_oneway=1
show_gps_pos=1
skip_eula=1
show_pedestrian=1
poi_labels=1
show_arrows_on_route=1
tts_min_ready_wav=1
tts_getaway_time=200
tts_expected_engine_delay=1400
reserve_memory=4197304
sound_q_length="200"
no_file_cache="0"
cache="2048"
enable_roadshadow=0
[map]
popup_info=1
show_labels=1
alternative_roadnames=1
3d_max_tiltlevel=9000
2dheadup=1
[msnd]
msnd.start=0
[tts]
tts_buffer=262144
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
announce_exit_directions=1
skip_exit_numbers=0

Can you use TMC in iGO? I tried it, but it doesn't work... :-/

deaad said:
Yep.
I use it without any problem in 800-400 and TTS.
Click to expand...
Click to collapse
I've been trying to get TTS to work for weeks, with no success so far. Whenever I select a TTS voice it's silent.
How did you install TTS? Would it be possible to post of list of the folders/files in your Igo setup?
I don't have sys.ini file - only a sys.txt file - could this be a problem?

hello,
i also have proplems with tts . has anyone a solution?
thx

This is what worked for me after half a day of trying different settings:
[folders]
app="%SDCARD%/iGO8"
save="%SDCard%/iGO8/save"
[device]
Type="ALIAS_TOUCH HD"
sdcard_dsk_num=7
[interface]
maxzoom2d=6000000
show_exit=1
show_minimize=0
skin="ui_igo8"
resolution_dir="480_800"
screen_x=480
screen_y=800
vga=1
wide=1
recalc_voice=0
mapfontscale=200
drive_carefully=0
popup_info=1
laneinfo_signpost_enabled=1
shutdown_time=0
show_orientation=1
defaultzoom3d=40
[rawdisplay]
highres=0
autoconfig=1
driver=GDI
[sound]
ding=0
[config]
autoset2donmap=1
autoset3doncockpit=1
[sound.announcer]
gps_disconnected=0
gps_signal_lost=0
Recalc_voice=0
[map]
3d_max_tiltlevel=8000
3d_max_zoomlevel=3000
3d_min_zoomlevel=40
3d_max_zfar=2000
3d_scale_carmodel=1
3dcarsizemin=3500
3dcarsizemax=5000
3d_carsizeemul=60000
[tts]
always_say_road_names=1
announce_exit_directions=1
announce_street_name=1
gps_disconnected=0
gps_signal_lost=0
Recalc_voice=0
[debug]
disable_outlookpoi=0
show_oneway=1
show_oneway_3d=1
show_lane_info=1
show_speed_limit=0
skip_eula=1
enable_roadshadow=1
[power]
powermgm_state=0
backlight_day=95
Backlight_night=15
[poi]
enable_pois_before_080217=1

what is the best baud rate to set up the GPS settings.
I also noticed that the GPS is little bit off in few meters how can I fix that.
I am running Rom 6.5 europe on T Mobile

I use unbranded TP2 with the below configuration:
[gps]
internal=1
source="virtserial"
port=0
baud=38400
It was working flawlessly with WM6.1; same with the latest official WM6.5.

I have been working on to get Igo 8 on it,
but everytime I start it up, it says:
failed to open file: ui_igo8\480_800\loading.bmp exiting application.
Can somebody explain what I am doing wrong?
tnx

An error you report means, you use "data.zip" file that does not support skin being selected.
Either you should change the skin or google for a right "data.zip" file.

all right, those of you who claim to be using 480-800 settings, i'm not saying you're wrong, but have you tried to install a 480-800 skin? whenever i put a 480-800 into my skins folder the program ignores it. however, the lower resolution version of the skin shows up and has no problem loading. this leads me to believe that the program is not actually running at 480-800. am i missing something here? any igo8 gurus have any idea?

iGO8 shows only skins fitting into it's settings so lack of 480x800 resolution means incorrect sys.txt
I use the below settings to get Gurjon skin working fine with 480x800 resolution:
[rawdisplay]
highres=0
autoconfig=1
driver="gx"
screen_y=800
screen_x=480
Additionally, you need to have data.zip file supporting this resolution, otherwise you will receive an error message as reported few posts before.
[edit]
Please note that there are TWO copies of sys.txt - one is located on your SD card while the second is (typically) located on your device in program files\igo8 folder.
iGO8 is using that SECOND one...

tovermars - first off your having that error because u have the wrong data.zip that doesnt have a 480x800 resolution in the zip file and or ur sys.txt file isnt in landscape mode...uur best bet to try to see if u have atleast one of them right..is to before u start igo8..open ur slideout keyboard and put ur screen in landscape mode vmanually..then start igo8..this should work and the program should open like normal because ur phone is alrdy in landscape mode before u start the program...#2 if that doe s work u may need to go to settings and turn ur screen to landscape mode everytime u want to start igo8..which will be a pain but atleast u get it to work..ur gonna need to adjust ur sys.txt settings and put landscape mode in the text..
people having tts problems u need to have the right audio folder in the root igo8 folder with the correct "EN" files that come with tts..theres a perfect site for this that will solve all of ur igo8 problems but u guys gotta find it urselves..the first pa4rt of the address is ppc the rest if "blank" cant use that word here in xda so search for ppc"blank".org and go to gps section ull solve all ur problems.

This version "iGO8.3.2.80621" works great on my T-Mo HTC TP2.

lorin.bute said:
This is what worked for me after half a day of trying different settings:
[folders]
app="%SDCARD%/iGO8"
save="%SDCard%/iGO8/save"
Click to expand...
Click to collapse
Thank you! your settings worked for me perfectly!

Hi,
I got the the 800 x 480 working properly on either portrait and landscape only. I can't seem to be able to change orientation to 800 x 480 as I please. It must be the sys.txt is either setting the resolution to portrait only, or landscape only. Is it just me having this issue ?

[REF][Manila] Different approach to the BG4All mod

This thread is mainly intended for developers - it's a proof-of-concept to show a new approach to the classic background for all tabs mod.
This is only a proof-of-concept and I won't develop it further because I don't use BG4all myself. But my hope is that the basic concept will be helpful to others, and that it will develop from there.
Traditionally the mod is made by moving the "HomeBackgroud" instance from home.mode9 to manila.mode9. The problem with this is that those are 2 of the most important mode9 files in manila, so they are also needed for a lot of other manila mods.
The result of this is that other mods now have to be made in 2 version: one with bg4all and one without. Also, if a new manila build changes one of the mode9s, the bg4all mod needs to be remade.
A different way of doing it is thought the lua scripts. Specifically only one script needs to be modified to make bg4all: homebackground.luac.
This way no mode9 files are modified so bg4all can be compatible with a lot of other mods. This way mods don't have to be redone to include bg4all.
I've included the lua source of the modified homebackground.luac for manila 2.5 with comments about what’s been changed, but you can also compare it to the original to get a better idea. At the bottom is a ready-made cab with bg4all for manila 2.5.
Here's the lua code:
Code:
-- Decompiled using luadec 3.2
-- File name: 090a4ee8_manila -- \windows\htc\home\scripts\HomeBackground.luac
require("asyncimageloader")
require("shell_svc")
CachedImagePath = "\\Windows\\HomeBackground.img"
HomeBackground.Opacity.value = 0
-- Home Background is not needed at all, so it should be made invisible
-- and we can forget about it from here on
-- from this point on anything that operated on HomeBackground is replaced with BackGroundLevel0
-- compare with the original 090a4ee8_manila to see the differences
-- BackGroundLevel0 is the default manila background that appears on all tabs
InterpolateOpacity = function(l_1_0, l_1_1)
l_1_1.Opacity:Interpolate(l_1_0, 20, 0, Interpolate_EaseOutQuad)
end
BackgroundWidth = 480
BackgroundHeight = 696
LoadDefaultBackground = function()
InterpolateOpacity(0, BackGroundLevel0)
if HomeTitleBar ~= nil then
HomeTitleBar.Opacity.value = 0
_application.Navigation.TabTrayOpacity = 100
end
end
BackgroundImageLoaded = function(l_3_0, l_3_1)
if l_3_0 then
if l_3_1 == 1 then
BackGroundLevel0.TextureCoords.width = l_3_0.TextureCoords.width
BackGroundLevel0.TextureCoords.height = l_3_0.TextureCoords.height
local l_3_2 = l_3_0.TextureCoords.width * l_3_0.Image.Width
local l_3_3 = l_3_0.TextureCoords.height * l_3_0.Image.Height
_StoreImageWidth = l_3_2
_StoreImageHeight = l_3_3
local l_3_4 = l_3_2 / BackgroundWidth
local l_3_5 = l_3_3 / BackgroundHeight
if l_3_4 < l_3_5 then
BackGroundLevel0.Size.height = l_3_3 / l_3_2 * BackgroundWidth
BackGroundLevel0.Size.width = BackgroundWidth
else
BackGroundLevel0.Size.width = l_3_2 / l_3_3 * BackgroundHeight
BackGroundLevel0.Size.height = BackgroundHeight
end
BackGroundLevel0.Position.x = (BackgroundWidth - BackGroundLevel0.Size.width) / 2
BackGroundLevel0.Position.y = 696 - (BackgroundHeight - BackGroundLevel0.Size.height) / 2 -- +696 is added here because the BG0's camera y-axis is set at the bottom, while Home's camera was set at the top
BackGroundLevel0:SetTexture(l_3_0.Image)
InterpolateOpacity(100, BackGroundLevel0)
if HomeTitleBar ~= nil then
local l_3_6 = _application.Store:GetIntValue(Lifetime_Application, "ShowCacheHomePage")
if l_3_6 == 1 then
HomeTitleBar.Opacity.value = 60
_application.Navigation.TabTrayOpacity = 60
end
end
else
LoadDefaultBackground()
end
collectgarbage("collect")
BackgroundAsyncImageLoader = nil
elseif _StoreImageWidth and _StoreImageHeight then
local l_3_7 = _StoreImageWidth / BackgroundWidth
local l_3_8 = _StoreImageHeight / BackgroundHeight
if l_3_7 < l_3_8 then
BackGroundLevel0.Size.height = _StoreImageHeight / _StoreImageWidth * BackgroundWidth
BackGroundLevel0.Size.width = BackgroundWidth
else
BackGroundLevel0.Size.width = _StoreImageWidth / _StoreImageHeight * BackgroundHeight
BackGroundLevel0.Size.height = BackgroundHeight
end
BackGroundLevel0.Position.x = (BackgroundWidth - BackGroundLevel0.Size.width) / 2
BackGroundLevel0.Position.y = 696 - (BackgroundHeight - BackGroundLevel0.Size.height) / 2 -- +696 same as before
end
end
BeginLoadBackgroundImage = function(l_4_0)
if Shell_HaveDRMRightsToFile(machineStatus.HomeBackgroundPath.Value, false) then
BackgroundAsyncImageLoader = AsyncImageLoader()
BackgroundAsyncImageLoader.Priority = TaskPriority_Normal
BackgroundAsyncImageLoader.OnComplete:connect(BackgroundImageLoaded)
BackgroundAsyncImageLoader:BeginLoadFile(l_4_0, false, true)
else
machineStatus.HomeBackgroundPath.Value = ""
machineStatus.CachedBackgroundPath.Value = ""
LoadDefaultBackground()
end
end
BackgroundImageResized = function(l_5_0, l_5_1)
if l_5_1 == 1 and machineStatus.HomeBackgroundPath.Value ~= "" then
machineStatus.CachedBackgroundPath.Value = machineStatus.HomeBackgroundPath.Value
BeginLoadBackgroundImage(CachedImagePath)
else
LoadDefaultBackground()
BackgroundAsyncImageLoader = nil
end
collectgarbage("collect")
end
machineStatus_OnCustomBackgroundUpdate = function()
if _config_os == "windowsmobile" then
local l_6_0 = machineStatus.HomeBackgroundPath.Value
local l_6_1 = machineStatus.CachedBackgroundPath.Value
if l_6_0 ~= l_6_1 then
if BackgroundAsyncImageFactoryLoader ~= nil and BackgroundAsyncImageFactoryLoader:IsRunning() then
BackgroundAsyncImageFactoryLoader = nil
collectgarbage("collect")
end
if BackgroundAsyncImageLoader ~= nil and BackgroundAsyncImageLoader:IsRunning() then
BackgroundAsyncImageLoader = nil
collectgarbage("collect")
end
if l_6_0 == "" then
machineStatus.CachedBackgroundPath.Value = machineStatus.HomeBackgroundPath.Value
LoadDefaultBackground()
else
BackgroundAsyncImageFactoryLoader = AsyncImageFactoryLoader()
BackgroundAsyncImageFactoryLoader.Priority = TaskPriority_BelowNormal
BackgroundAsyncImageFactoryLoader.Quality = 100
BackgroundAsyncImageFactoryLoader.OnComplete:connect(BackgroundImageResized)
BackgroundAsyncImageFactoryLoader:ResizeImage(machineStatus.HomeBackgroundPath.Value, CachedImagePath, EncoderType_JPEG, 512, 512, true, false)
end
elseif l_6_1 ~= "" then
BeginLoadBackgroundImage(CachedImagePath)
else
LoadDefaultBackground()
end
else
LoadDefaultBackground()
end
end
if _application.Store:GetStringValue(Lifetime_Permanent, "EnableLandscape") == "true" then
require("RotationTemplate")
HomeBackground_ScreenRotation = class(RotationTemplate)
HomeBackground_ScreenRotation.__init = function(l_7_0)
RotationTemplate.__init(l_7_0)
trace("+++++++[HomeBackground] : __init")
end
HomeBackground_ScreenRotation.OnScreenRotation = function(l_8_0)
trace("+++++++[HomeBackground] : OnScreenRotation")
if _application.Orientation == ScreenOrientation_Portrait then
BackgroundWidth = 480
BackgroundHeight = 696
elseif _application.Orientation == ScreenOrientation_Landscape then
BackgroundWidth = 805
BackgroundHeight = 376
end
BackgroundImageLoaded(nil, nil)
end
end
if _config_os == "windowsmobile" then
if _application.Store:GetStringValue(Lifetime_Permanent, "EnableLandscape") == "true" then
_HomeBackground_ScreenRotation = HomeBackground_ScreenRotation()
end
machineStatus.HomeBackgroundPath.OnValueChanged:connect(machineStatus_OnCustomBackgroundUpdate)
_application.OnOrientationChanged:connect(machineStatus_OnCustomBackgroundUpdate) -- needed for correct rotation
machineStatus_OnCustomBackgroundUpdate()
end

I just wanted to say THANKS! for all you work on the community and tell you what a great find you did "it looks so obvious to do it that way now" also THANKS! on your work on the decompiler many mods would not have been made without it.
By the way THANKS! again

nice, thank you

Perfect, once again a fantastic mod from you!
Thanks a million

Thanks a lot cookiemonster. Any plans to do one that also works to assign landscape wallpaper?
edit* Just tried it on landscape manila and doesnt work at all. Just get plain black background in portrait and landscape.

Awesome. So does this method keep the animated weather on sense 2.1? Could you cab that up PLEASE!!!!!

Superboy007 said:
I just wanted to say THANKS! for all you work on the community and tell you what a great find you did "it looks so obvious to do it that way now" also THANKS! on your work on the decompiler many mods would not have been made without it.
By the way THANKS! again
Click to expand...
Click to collapse
Wow, that's 3 very big thanks' I'm very glad I can contribute to the community.
kwill said:
Thanks a lot cookiemonster. Any plans to do one that also works to assign landscape wallpaper?
edit* Just tried it on landscape manila and doesnt work at all. Just get plain black background in portrait and landscape.
Click to expand...
Click to collapse
You're referring to manila 2.5.1922.2911, right?
That one also needs the manila.mode9 to work, but that's only because it has a built in bug in it's original manila.mode9. (I've made a cab for it here: http://forum.xda-developers.com/showpost.php?p=5499189&postcount=47)
Now, it might seem a little contradictory, that in the first post I say "no need to modify the mode9s", and now I'm saying 2.5.1922.2911 needs a mode9. But, believe me 2.5.1922.2911 is an exception rather than the rule. That version is bugged, and it's the only reason it needs the mode9 to work.
rjmjr69 said:
Awesome. So does this method keep the animated weather on sense 2.1? Could you cab that up PLEASE!!!!!
Click to expand...
Click to collapse
I've made some cabs here: http://forum.xda-developers.com/showpost.php?p=5499189&postcount=47
I haven't tested the animated wallpaper, only the regular. This is only a proof-of-concept and I won't develop it further because I don't use BG4all tabs myself (I prefer making better quality wallpaper with HDWall).
But my hope is that the basic concept will be helpful to others, and that it will develop from there.

Thanks Man,
A great new applicaiton. It also works for me Many Thanks

Co0kieMonster said:
Wow, that's 3 very big thanks' I'm very glad I can contribute to the community.
You're referring to manila 2.5.1922.2911, right?
That one also needs the manila.mode9 to work, but that's only because it has a built in bug in it's original manila.mode9. (I've made a cab for it here: http://forum.xda-developers.com/showpost.php?p=5499189&postcount=47)
Click to expand...
Click to collapse
Thanks much cookiemonster! I'm actually getting used to not using bg4all too. Manila runs much smoother without. Maybe I'll make some high quality walls with hdwalls also. But, it doesnt work on manila 2.5.1922 does it?
edit** Ok, now this was kind of weird. Installed the cab and all was fine, til I switched to landscape and back. My wallpaper disappeared after that, never to return Naw, after soft reset, it came back. But, same thing keeps happening.

If not here, i dont know a better place to get capable people that could MAYBE help me on this matter.
I am Using the "old" Tf3d (not leo) on my X1 and i came across a pretty sad thing.
TF3D scales down the Wallpaper and makes it look worse. I made a mod for a self changing wallpaper for tf3d so i got into the lua files quite a bit half a year ago.
So my questions are:
Do you have any idea where the image is scaled down in the lua code?
can you think of any workaround to get a better image quality?
I think this would make it SO SO SO much better, as the images in full quality look just stunning..and on tf3d they look just blurry.
And another brief question, did the lua decompilers got better?..half a year ago almost any big lua file could not be decompiled properly..and so could not be changed at all.
thank you in advance,
Daranus

kwill said:
Thanks much cookiemonster! I'm actually getting used to not using bg4all too. Manila runs much smoother without. Maybe I'll make some high quality walls with hdwalls also. But, it doesnt work on manila 2.5.1922 does it?
edit** Ok, now this was kind of weird. Installed the cab and all was fine, til I switched to landscape and back. My wallpaper disappeared after that, never to return Naw, after soft reset, it came back. But, same thing keeps happening.
Click to expand...
Click to collapse
HDWall works with 1922, but my patch for that version needs to be applied.
The landscape problem: As I've said, it's just a proof-of-concept and I won't develop it further. Anyone who wishes to do so: In order to fix the landscape problem, the BackGroungLevel0 texture needs to be reapplied in the rotation function.
Daranus said:
If not here, i dont know a better place to get capable people that could MAYBE help me on this matter.
I am Using the "old" Tf3d (not leo) on my X1 and i came across a pretty sad thing.
TF3D scales down the Wallpaper and makes it look worse. I made a mod for a self changing wallpaper for tf3d so i got into the lua files quite a bit half a year ago.
So my questions are:
Do you have any idea where the image is scaled down in the lua code?
can you think of any workaround to get a better image quality?
I think this would make it SO SO SO much better, as the images in full quality look just stunning..and on tf3d they look just blurry.
Click to expand...
Click to collapse
It's scaled down to 512X512 in the homebackground.lua script.
One workaround is to make it use 480x800 jpegs or pngs, but that still isn't optimal because Manila displays those formats with some kind of dot artifacts.
The best quality solution is to use Manila's native QTC format, but you have to make your wallpapers with HDWall: http://forum.xda-developers.com/showthread.php?t=503511
Daranus said:
And another brief question, did the lua decompilers got better?..half a year ago almost any big lua file could not be decompiled properly..and so could not be changed at all.
thank you in advance,
Daranus
Click to expand...
Click to collapse
I've been developing LuaDec recently and made a lot of improvements - it can decompile more than 90% of all Manila script. The link to the tool is in my signature.

very goog , thanks.

hej Co0kie!
does this one work with your 16-20 Quicklinks/Appointments beta_1.5?
the QL app is a sure nomination for some HTC price. I'm getting used to not having a B4all, but would be sooo nice to have this working too

dXsL said:
hej Co0kie!
does this one work with your 16-20 Quicklinks/Appointments beta_1.5?
the QL app is a sure nomination for some HTC price. I'm getting used to not having a B4all, but would be sooo nice to have this working too
Click to expand...
Click to collapse
I just checked it and it's working fine with v1.5beta2. (on Manila 2.5.1922.3829)
And I really don't see why it should be causing any problems. The two mods use different files.

Co0kieMonster said:
The landscape problem: As I've said, it's just a proof-of-concept and I won't develop it further. Anyone who wishes to do so: In order to fix the landscape problem, the BackGroungLevel0 texture needs to be reapplied in the rotation function.
Click to expand...
Click to collapse
Anyone have done this?
I have tried doing it myself. I have modified
Code:
HomeBackground_ScreenRotation.OnScreenRotation = function(l_8_0)
trace("+++++++[HomeBackground] : OnScreenRotation")
if _application.Orientation == ScreenOrientation_Portrait then
BackgroundWidth = 480
BackgroundHeight = 696
elseif _application.Orientation == ScreenOrientation_Landscape then
BackgroundWidth = 805
BackgroundHeight = 376
end
[B]BeginLoadBackgroundImage(CachedImagePath)[/B]
end
Whithout luck... any hints why this is not working?

Thank you for your answer!
That doesnt sound good..i personally use S2U2 now, as the wallpapers there look just stunning..it's a shame that we cannot get it to work properly within manila...do you know if it is the same issue with version 2.5 cookiemonster?
Wow thats awesome..when i was developing a bit stuff it was just a pain in the ass because almost every big manila file couldnt be edited..
Big props to you mate, great great work, greatly appreciated!!!..maybe i will take a look at it again nuw...as making wallpapers like that sucks..and i think it wouldnt work with my bg changer mod....anyways, thank you man!!!!!!!!!!!!!!!!!!!
Edit: Yup, i will definitely try to figure something out there..is there any "comfortable" way to work with your new luatool thingy?..i only saw 12's kitchen and that is not using a new version and is not that easy configurable to use your new thing there...
atm i search for the asyncimageloader but didnt find a way to properly search for it *laughs*..i have to get into this stuff again for real..

mac_es said:
Anyone have done this?
I have tried doing it myself. I have modified
Code:
HomeBackground_ScreenRotation.OnScreenRotation = function(l_8_0)
trace("+++++++[HomeBackground] : OnScreenRotation")
if _application.Orientation == ScreenOrientation_Portrait then
BackgroundWidth = 480
BackgroundHeight = 696
elseif _application.Orientation == ScreenOrientation_Landscape then
BackgroundWidth = 805
BackgroundHeight = 376
end
[B]BeginLoadBackgroundImage(CachedImagePath)[/B]
end
Whithout luck... any hints why this is not working?
Click to expand...
Click to collapse
Not sure why that doesn't work. I'll do some testing this weekend to try to find out.
Daranus said:
Thank you for your answer!
That doesnt sound good..i personally use S2U2 now, as the wallpapers there look just stunning..it's a shame that we cannot get it to work properly within manila...do you know if it is the same issue with version 2.5 cookiemonster?
Click to expand...
Click to collapse
It's the same thing on 2.5 as previous versions.
Daranus said:
Wow thats awesome..when i was developing a bit stuff it was just a pain in the ass because almost every big manila file couldnt be edited..
Big props to you mate, great great work, greatly appreciated!!!..maybe i will take a look at it again nuw...as making wallpapers like that sucks..and i think it wouldnt work with my bg changer mod....anyways, thank you man!!!!!!!!!!!!!!!!!!!
Edit: Yup, i will definitely try to figure something out there..is there any "comfortable" way to work with your new luatool thingy?..i only saw 12's kitchen and that is not using a new version and is not that easy configurable to use your new thing there...
atm i search for the asyncimageloader but didnt find a way to properly search for it *laughs*..i have to get into this stuff again for real..
Click to expand...
Click to collapse
12aon and hilaireg are working on an updated kitchen. It should be easier to get things done once it's out.

Co0kieMonster said:
Not sure why that doesn't work. I'll do some testing this weekend to try to find out.
Click to expand...
Click to collapse
Great! Thank you very much!

Hi there, I still cannot find the cab to make M2.5.2011303 to work for background-for-all. Can somebody have a hint there ? Thanks

This one works
http://forum.xda-developers.com/attachment.php?attachmentid=274664&d=1264873157

Asus P835 IGO08 finally works

Hi all,
finally after some time we were able to launch IGO08 on Asus P835.
But some difficulties still exists.
Requirements:
- older IGO8 version 8.0.0.41506 is working
- IGO VGA mode only
- no automatic landscape mode, default is always portrait (is neccessary to force landscape orientation before igo launching)
- gless driver only, as original DDI.DLL is partially defective. As Asus didnt pay enough attention to this device.
GPS device is operating on COM2, baudrate 57600.
Big thanks to my IGO master friend "Tomsoft".
See for sys.txt setting :
[folders]
app="my storage/igo8"
[device]
;type="asus"
[interface]
resolution_dir="320_240"
screen_x=640
screen_y=480
maxzoom2d=6000000
show_exit=1
mapfontscale=160
popup_info=1
vga=1
[rawdisplay]
class="rlandscape"
screen_x=640
screen_y=480
driver="GLESS"
;autoconfig=1
stretch=1
highres=1
[debug]
skip_eula=1
disable_outlookpoi=1
sound_q_length=200
queue_length=200
;show_performance=1
;show_device_type=1
;show_rawdisplay_info=1
[sound]
sound_q_length=200
queue_length=200
Click to expand...
Click to collapse

TMC working in iGO Primo on HTC Touch HD

So you want to run TMC in iGO Primo on a HTC Touch HD? Here's how to do it.
These are the files in the Primo folder I think are relevant to getting TMC working;
iGO.exe v8.5.11.168090
atmc_ce.dll v8.0.0.49
avqtmc.dll v8.0.235.21
nnghal.dll v8.5.9.152270
tmcgps.dll v8.0.0.49
This is a copy of my sys.txt file, it's the complete list. Look for the TMC entries and add them to your sys.txt file. Note the sections in the sys file i.e. the [sections].
[device]
type="HTC Touch HD"
[folders]
tts_loq="\Storage Card\Primo\TTS_LOQ"
tts_nua_v5="\Storage Card\Primo\tts_nua_v5"
has_secondary_root=0
[interface]
show_exit=1
show_minimize=1
extra_settings=1
resolution_dir="800_480"
vga=0
shutdown_time=0
home="Acasa"
car="CAR"
maxzoom2d=6000000
defaulttilt3d=6900
show_gps_config=1
show_tmc_config=1
show_zoombar=1
show_tmc_eventlist=1
[dynamiccompressor]
compressor="1"
a0="56806"
thrs="24703"
ratio="8"
gain="8"
[rawdisplay]
highres=0
screen_x=800
screen_y=480
stretch=1
class=landscape
[screen]
preferred_orientation=2
[map]
3d_scale_carmodel="1"
3dcarsizemin="9500"
3dcarsizemax="15000"
3dcarsizemul="15000"
show_oneway="1"
tmczoommin=1
tmczoommax=40
tmczoommini=10
tmczoomsmall=5
[gps]
port=4
baud=57600
disable_advanced=0
;protocol="nmea"
set_messages=0
background_navigation=1
logging=0 ; see also mydata.tracks
[power]
skip_suspend_process=1
skip_resume_process=1
skip_suspend_process_all=1
skip_resume_process_all=1
power_off_mode = 0
power_off_timeout = 0
powermgm_state = 0
[sound]
ding=1
sound_q_length=200
queue_length=200
mute_os_key=1
pause_mp3_sooner=1
[other.fm_transmitter]
fmtx_ena
[warning]
speedcam_warning="1"
[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
skip_exit_numbers=2
[tmc]
saved_config_available="1"
saved_config_classname="NMEA_GPSTMC_ROYALTEK"
saved_config_portname="COM"
saved_config_port="9"
auto_tuning="1"
saved_last_tuning_mode="1"
You will need HyperGPS installed, configured and running before you start Primo. This install is free and can be found online. If you already use it with iGO 8 you don't have to do anything more. Just make sure it's running before starting Primo.
These are the settings I have for HyperGPS on the HTC Touch HD;
COM Port = 9
FM Band = CCIR 87.5-108MHz
Data output = TMC Data
Sound output = Speaker
Mute radio = Tuned sound
Log mode = Not Logged
Protocol = Royaltek
You will need to plug some headphones into the ear-jack. If you have HyperGPS running you will still hear sound coming from the handset even though the headphones icon appears on the display. This is required for the radio to pick up the TMC data. I use an old pair of headphones, I've cut the earpieces off the other end and then looped the wire so as to make it tidy but long enough in length to pick up TMC data over the radio (the headphones acts as an antenna for the radio).
You will then need to start Primo and go to the settings panel for Traffic. Enable the first two options and eventually you should start to see TMC data flow into the handset (you may need to restart Primo).
If it doesn't work it might be that you do not have a valid license file in the \Primo\license\ folder (.lic file).
Give it a go and let me know if you have any problems.

wsowka said:
So you want to run TMC in iGO Primo on a HTC Touch HD? Here's how to do it.
These are the files in the Primo folder I think are relevant to getting TMC working;
iGO.exe v8.5.11.168090
atmc_ce.dll v8.0.0.49
avqtmc.dll v8.0.235.21
nnghal.dll v8.5.9.152270
tmcgps.dll v8.0.0.49
This is a copy of my sys.txt file, it's the complete list. Look for the TMC entries and add them to your sys.txt file. Note the sections in the sys file i.e. the [sections].
[device]
type="HTC Touch HD"
[folders]
tts_loq="\Storage Card\Primo\TTS_LOQ"
tts_nua_v5="\Storage Card\Primo\tts_nua_v5"
has_secondary_root=0
[interface]
show_exit=1
show_minimize=1
extra_settings=1
resolution_dir="800_480"
vga=0
shutdown_time=0
home="Acasa"
car="CAR"
maxzoom2d=6000000
defaulttilt3d=6900
show_gps_config=1
show_tmc_config=1
show_zoombar=1
show_tmc_eventlist=1
[dynamiccompressor]
compressor="1"
a0="56806"
thrs="24703"
ratio="8"
gain="8"
[rawdisplay]
highres=0
screen_x=800
screen_y=480
stretch=1
class=landscape
[screen]
preferred_orientation=2
[map]
3d_scale_carmodel="1"
3dcarsizemin="9500"
3dcarsizemax="15000"
3dcarsizemul="15000"
show_oneway="1"
tmczoommin=1
tmczoommax=40
tmczoommini=10
tmczoomsmall=5
[gps]
port=4
baud=57600
disable_advanced=0
;protocol="nmea"
set_messages=0
background_navigation=1
logging=0 ; see also mydata.tracks
[power]
skip_suspend_process=1
skip_resume_process=1
skip_suspend_process_all=1
skip_resume_process_all=1
power_off_mode = 0
power_off_timeout = 0
powermgm_state = 0
[sound]
ding=1
sound_q_length=200
queue_length=200
mute_os_key=1
pause_mp3_sooner=1
[other.fm_transmitter]
fmtx_ena
[warning]
speedcam_warning="1"
[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
skip_exit_numbers=2
[tmc]
saved_config_available="1"
saved_config_classname="NMEA_GPSTMC_ROYALTEK"
saved_config_portname="COM"
saved_config_port="9"
auto_tuning="1"
saved_last_tuning_mode="1"
You will need HyperGPS installed, configured and running before you start Primo. This install is free and can be found online. If you already use it with iGO 8 you don't have to do anything more. Just make sure it's running before starting Primo.
These are the settings I have for HyperGPS on the HTC Touch HD;
COM Port = 9
FM Band = CCIR 87.5-108MHz
Data output = TMC Data
Sound output = Speaker
Mute radio = Tuned sound
Log mode = Not Logged
Protocol = Royaltek
You will need to plug some headphones into the ear-jack. If you have HyperGPS running you will still hear sound coming from the handset even though the headphones icon appears on the display. This is required for the radio to pick up the TMC data. I use an old pair of headphones, I've cut the earpieces off the other end and then looped the wire so as to make it tidy but long enough in length to pick up TMC data over the radio (the headphones acts as an antenna for the radio).
You will then need to start Primo and go to the settings panel for Traffic. Enable the first two options and eventually you should start to see TMC data flow into the handset (you may need to restart Primo).
If it doesn't work it might be that you do not have a valid license file in the \Primo\license\ folder (.lic file).
Give it a go and let me know if you have any problems.
Click to expand...
Click to collapse
add this
[tmc]
enable_subscription="1"
saved_config_available="1"
saved_config_classname="NMEA_GPSTMC_ROYALTEK"
saved_config_portname="COM"
saved_config_port="9"
saved_config_baud="38400"
auto_band_search_up="1"
auto_tuning="1"
My HTC HD work with this. Remove your tmc string.
Set HyperGPS com 9!

soso72 said:
add this
[tmc]
enable_subscription="1"
saved_config_available="1"
saved_config_classname="NMEA_GPSTMC_ROYALTEK"
saved_config_portname="COM"
saved_config_port="9"
saved_config_baud="38400"
auto_band_search_up="1"
auto_tuning="1"
My HTC HD work with this. Remove your tmc string.
Set HyperGPS com 9!
Click to expand...
Click to collapse
I'll give it a try

TMC primo 1.2 working
Hi,
I got TMC working on the Touch HD in primo 1.2 using HyperGPS.
Altough before I start primo 1.2 I have to reload the GPS Intermediate driver.
(External GPS Icon->Access-> Manage GPS Auto off -> OK, and External GPS Icon->Access-> Manage GPS Auto on -> OK) It looks like after using primo the GPSID doesn't work anymore for COM 9. The GPS on COM 4 allways works...
Any idea's
1) How to reload the GPSID using a script or something else.
2) What could be the problem here....???

Igo primo 2d display problem

Hi, I have a problem with the map in 2D displays an install different versions of igo and various maps currently installed iGO Primo I (2.4) Israel 9.6.29.404739 [KitKat HD] Q1.2014 maps and each time the same problem 2d mode appear horizontal stripes that look like roads but the roads do not exist everything else works without a problem ... sorry for my English

kenezor30 said:
Hi, I have a problem with the map in 2D displays an install different versions of igo and various maps currently installed iGO Primo I (2.4) Israel 9.6.29.404739 [KitKat HD] Q1.2014 maps and each time the same problem 2d mode appear horizontal stripes that look like roads but the roads do not exist everything else works without a problem ... sorry for my English
Click to expand...
Click to collapse
Same problem here, and Igo work very slowly on this tablet. Looking for solution but no luck.
Anyone can help ?

Answer
kenezor30 said:
Hi, I have a problem with the map in 2D displays an install different versions of igo and various maps currently installed iGO Primo I (2.4) Israel 9.6.29.404739 [KitKat HD] Q1.2014 maps and each time the same problem 2d mode appear horizontal stripes that look like roads but the roads do not exist everything else works without a problem ... sorry for my English
Click to expand...
Click to collapse
Add the following to sys.txt file:
[2d]
use_flat3d=1
Have a fun.

Answer
kenezor30 said:
Hi, I have a problem with the map in 2D displays an install different versions of igo and various maps currently installed iGO Primo I (2.4) Israel 9.6.29.404739 [KitKat HD] Q1.2014 maps and each time the same problem 2d mode appear horizontal stripes that look like roads but the roads do not exist everything else works without a problem ... sorry for my English
Click to expand...
Click to collapse
Add the following to sys.txt file:
[2d]
use_flat3d=1
If you want to speed up your iGO Primo you can add to the sys.txt the following line:
[debug]
max_memory=419430400
It will dramatically increase your iGO Primo work speed.
Enjoy!

I tried many, no one works...
What all I need to do to have igo on tab s 8.4 in full res
thanks

A.U. said:
Add the following to sys.txt file:
[2d]
use_flat3d=1
Have a fun.
Click to expand...
Click to collapse
works, thanks

Thanks for both solutions. Both works for me on Gallaxy S7 flat. Though, now when selecting rout alternatives the new route is not being refreshed on the rout alternatives screen, so I can not see the difference between them, only after going back to navigation mode. Any chance of fixing that as well?

Igo display black on Galaxy Tab S3
Hi,
I hope this problem may be related. 1st, I already tried with the entry in sys.txt but no success..
Just installed igo basar version iGO_Basar_9.18.27.717219.apk
Adapted sys.txt so that it does no longer ask for download. No message appears but the display
remains black and I need to hit several times the tab's buttons to get back to normal screen.
The app then is ended with a message..
Here is my sys.txt
---------begin-----------
[device]
type="android"
[android]
fullscreen=1
create_sdcard_dir=0
close_keyboard_on_back=1
background_shutdown_timeout=0
check_folders_after_rebuild=0
tablet=1
[rawdisplay]
screen_xy="auto"
[2d]
use_flat3d=1
[interface]
save_cheksum=0
minzoom2d=15
hide_eula=1
;show_glonass=1
[voice]
big_junction_prio=1
bridge_prio=2
tunnel_prio=3
;poi_prio=4
;natural_guidance_prio=5
[sound.announcer]
gps_signal_lost=0
gps_disconnected=0
[hnr]
ignored_missing_country_ids=*
[route]
hnr_ignored_missing_country_ids=*
[debug]
show_big_junction=1
skip_eula=1
max_memory=419430400
[gps]
background_navigation=1
location_log=0
location_log_filename="gpslog/LocationManager"
skip_announce_errors=1
accuracy_workaround=1
[folders]
data_folder_name="iGO_basar"
linked_root_list="/storage/emulated/0"
has_secondary_root=1
android_secondary_root_path=" /storage/0000-0000"
[naviextras]
boot_service_address="http://zippy.naviextras.com/services/index/rest"
[network]
available=1
[http]
enabled=1
[tmc.src.http]
enabled="1"
[tmc-http]
enabled=1
start=1
profile_name="nng-igo-tmc-igoworld"
profile_version=2
udp.enabled=0
dl_max_events_added=8000
[sound]
ding_muted=1
[vr]
disabled=0
[here]
show_trial_notice_onstart=0
[speedcam.disabled_countries]
[warning]
speedcam_maxdistance_from_road=15
speedcam_enabled=1
speedcam_warning=1
is_spoken=1
--------end---------
Did anyone install igo successfully on galaxy tab s3 ??