Develop Bugs

[Q] cm-7.1.0.1-Xperia Arc-LT15i vibrate not work?

hi!
After installing update-cm-7.1.0.1-Xperia Arc-LT15i I have a problem that vibrate Broken Is there any solution?

Yeah, wait for the update with the fix in it

First backup ur current rom..then flash with .368 den insatl cm 7,it s worked for me..
Sent from my LT15i using Tapatalk

So it means to boot into CWM recovery, wipe all datas, boot and dalvik cache,
power down the phone, use flashtool to flash the .368 ftf file?
after that use flashboot to flash the img file of cwm again?
then go into recovery, wipe all datas, boot and dalvik cache, install cm7 zip from sd card? reboot then go into recovery again to install gapps zip then reboot?
Did I miss anything here?

Yes..then u wil get back vibration..
Sent from my LT15i using XDA App

I tried flashtool on my PC to flash the stock SE .368 rom...it keeps aborting...And because it aborted, the phone can't be switched on...
So I try to flash the .ftf file on another PC, and strangely enough, it flashed without problem...I was able to revert back to .368 rom after that, flashboot the CWM boot.img, rebooted into CWM recovery, wipe data, wipe cache, wipe battery, wipe dalvik...
Installed the CM7.1 rom and GAPPS thereafter...it booted into CM7.1.
Question is...why is it my PC keeps aborting the flashing of the .ftf file?
I am using windows 7 home 64bit.
The other PC that flashed without problem is a windows 7 home 32bit.
If my experience can help people here...thanks.

lowizi said:
Yeah, wait for the update with the fix in it
Click to expand...
Click to collapse
yes that's right no any problem with new KERNEL
http://forum.xda-developers.com/showthread.php?t=1303635
Thanks for all and special thanks for DooMLoRD

CWM Disappears after installing any new rom.

CWM is no more there after installing a new rom and new rom won't load. Then i have to flash the stock rom again > root it > install CWM. Again when i install any rom it would install normally but nothing gives a blank screen after reboot and the stock rom is not even there.
The situation is occurring with the following;
Phone: Sony Xperia ARC S (LT18i)
Bootloader: unlocked
Android version 2.3.4 (Build 4.0.2.A.42) -
I have made multiple attempts on installing new roms but nothing works. Every time i reboot after installation im left with a blank screen. Can anyone advise what the problem could be ?
Thanks

Did u flash the kernel for the ROM u flashed ? The ROM will not boot without its kernel.
Sent from my Xperia Arc S using Tapatalk 2

mtpocketz said:
CWM is no more there after installing a new rom and new rom won't load. Then i have to flash the stock rom again > root it > install CWM. Again when i install any rom it would install normally but nothing gives a blank screen after reboot and the stock rom is not even there.
The situation is occurring with the following;
Phone: Sony Xperia ARC S (LT18i)
Bootloader: unlocked
Android version 2.3.4 (Build 4.0.2.A.42) -
I have made multiple attempts on installing new roms but nothing works. Every time i reboot after installation im left with a blank screen. Can anyone advise what the problem could be ?
Thanks
Click to expand...
Click to collapse
you must be installing CWM into the system through one touch command prompt program.. as such as soon as the ROM changes and you wipe out data and cache, CWM disappears..try flashing a custom recovery kernel which are available even for stock roms.
Also follow these steps for a custom ROM (eg CM9):
download the ROM, extracted it into a folder, copy the boot.img where you can remember, then copy the original cm9 ZIP - not the extracted folder- into the root of SD..use fastboot mode of flashtools to flash the kernel boot.img which you had copied..its a recovery kernel so CWM should open..wipe out SD data..then cache..and then go into advanced option and clear dalvik..and then proceed to install zip from sd..then gapps.zip if u want..it should install fine..and then reboot.
Press Thanks if you think i was of help to you..:good:

Thanks
iwarind said:
you must be installing CWM into the system through one touch command prompt program.. as such as soon as the ROM changes and you wipe out data and cache, CWM disappears..try flashing a custom recovery kernel which are available even for stock roms.
Also follow these steps for a custom ROM (eg CM9):
download the ROM, extracted it into a folder, copy the boot.img where you can remember, then copy the original cm9 ZIP - not the extracted folder- into the root of SD..use fastboot mode of flashtools to flash the kernel boot.img which you had copied..its a recovery kernel so CWM should open..wipe out SD data..then cache..and then go into advanced option and clear dalvik..and then proceed to install zip from sd..then gapps.zip if u want..it should install fine..and then reboot.
Press Thanks if you think i was of help to you..:good:
Click to expand...
Click to collapse
Got it - Yes i was installing CWM within stock rom via market. though i tried to install it through adb/windows but still i guess the problem was all about not installing a custom recovery kernel.
Thanks a lot !

Installation aborted error status 7 xperia mini
I succesfully rooted my xperia mini and installed cyanogenmod 9 rc2 (smultron). The device was running fine with no problems then i did a huge mistake i entered in the cwm recovery and i formatted cache data syatem and all that listed there.then i reboot device it stuck on free xperia project logo.then i tried to install rom via cwm i started to give error installation aborted status 7 error. Please help no backup of official rom.

aditya naik said:
I succesfully rooted my xperia mini and installed cyanogenmod 9 rc2 (smultron). The device was running fine with no problems then i did a huge mistake i entered in the cwm recovery and i formatted cache data syatem and all that listed there.then i reboot device it stuck on free xperia project logo.then i tried to install rom via cwm i started to give error installation aborted status 7 error. Please help no backup of official rom.
Click to expand...
Click to collapse
Download stock ROM and install it via Flashtool.
My signature, there is link to download stock ROMs. Search for proper one and install it.

[Q] Stuck on loading screen

hi everyone,
I have a problem with my GALAXY WODER I8150 a CM10 alpha 4.1, it stuck on loading screen, before the problem occur I downloaded the "COMBINE MODS MODEL-1" for CM10 alpha 7.. after I boot it and flash using CWM it only run trough loading screen and it always stuck..
I tried to reflash it using ODIN and used the firmware of my phone afterwards my phone still stuck on Loading screen
Please help me with this
thanks

try go to recovery mode and
1. wipe cache
2. go to advance and /format dalvik cache

emmerson00 said:
hi everyone,
I have a problem with my GALAXY WODER I8150 a CM10 alpha 4.1, it stuck on loading screen, before the problem occur I downloaded the "COMBINE MODS MODEL-1" for CM10 alpha 7.. after I boot it and flash using CWM it only run trough loading screen and it always stuck..
I tried to reflash it using ODIN and used the firmware of my phone afterwards my phone still stuck on Loading screen
Please help me with this
thanks
Click to expand...
Click to collapse
Of course it will still be stuck, you didn't clean the mess in your /system folder. ) You now have 2.3.6 and 4.1 having wild fun over there.
So, I assume, at this point, you have the stock ROM, with the stock recovery. So, what I suggest is that you read the little tutorial below and follow it exactly as it was written.
1. Download CWM for Samsung Galaxy Wonder from here. (It's also available in the development section here.)
2. Flash it via ODIN, by following exactly the same steps as for the ROM flashing.
3. Enter CWM and:
clear data (factory reset)
clear dalvik cache (under "advanced" menu)
go back one step and under "mounts & storage menu -> select "format /system" option. This step is crucial for a clean install!! Especially when changing Android versions.
under the same menu, go ahead and format /sdcard. (Be careful NOT to format /external_sd !)
At this point, you can choose if you want to flash the Samsung stock ROM again via ODIN or flash CM10 again (If you choose to flash CM10, I would suggest the latest version).
Now, if you want to reinstall the stock ROM:
4. exit from there and put your phone into Download Mode again (Home button + Volume DOWN + Power Button).
5. flash the stock ROM via ODIN
If you want to reinstall CM10:
4. go back to the main screen in CWM
5. go to "install zip from sdcard"
6. browse to the location of your CM ROM and flash it
7. flash the correct Gapps for your ROM
8. reboot
That's all. Good luck!

just wanna add one more thing in the end, if u wanna re install cm10 then install the alpha7 version so u can apply the combined mod which will work only on cm10 alpha7

[Q] Custom Rom not installed properly

Hello,
Today i rooted my Galaxy grand with CWM using Odin and intalled SuperSu through recovery mode. Then i entered recovery mode again to install Xperia Z rom for Galaxy Grand , which i had placed in my external sd card. When i installed it using all the steps(Wipe data,cache etc etc) and reeboted my device, it got stuck on the boot screen with Samsung Galaxy grand logo running in loop for several time. Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin.
Can u please tell me what went wrong while installing the rom.

nish1991 said:
Hello,
Today i rooted my Galaxy grand with CWM using Odin and intalled SuperSu through recovery mode. Then i entered recovery mode again to install Xperia Z rom for Galaxy Grand , which i had placed in my external sd card. When i installed it using all the steps(Wipe data,cache etc etc) and reeboted my device, it got stuck on the boot screen with Samsung Galaxy grand logo running in loop for several time. Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin.
Can u please tell me what went wrong while installing the rom.
Click to expand...
Click to collapse
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.

soralz said:
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
Click to expand...
Click to collapse
Source file? Are you speaking about the rom file I downloaded ?
Yes after installing the rom there is message Updated Successfully in CWM.
But i wiped the data and cache before installing the rom and dalvik cache after installing the rom..
Please help....can you give me detailed steps for installing rom.

If you are coming from stock rom after it shows installation complete again wipe all DATA frm cwm and reboot
Sent from my GT-I9505 using Tapatalk 2

Sulaimanshariff said:
If you are coming from stock rom after it shows installation complete again wipe all DATA frm cwm and reboot
Sent from my GT-I9505 using Tapatalk 2
Click to expand...
Click to collapse
Hey no worries...
I just installed another Xperia Z rom...and everything is grt nw....

Same Problem it is stucked now on that sceen and I too got the massage that it is install successfully... I cant install any other ROM as I want to use dual sim and most of the ROM are not compatible with dual SIM.... PLEASE HELP
soralz said:
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
Click to expand...
Click to collapse

nish1991 said:
Hello,
Today i rooted my Galaxy grand with CWM using Odin and intalled SuperSu through recovery mode. Then i entered recovery mode again to install Xperia Z rom for Galaxy Grand , which i had placed in my external sd card. When i installed it using all the steps(Wipe data,cache etc etc) and reeboted my device, it got stuck on the boot screen with Samsung Galaxy grand logo running in loop for several time. Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin.
Can u please tell me what went wrong while installing the rom.
Click to expand...
Click to collapse
"Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin."
can you tell me how you did?? i am a newbie

stuck in boot loop
soralz said:
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
Click to expand...
Click to collapse
yes everything went right but after i click reboot than i try to start samsung galaxy grand i9082 logo appears there it blink 4 5 times then i remove my battery and try to start again but now it is not even opening not cwm recovery menu and not going to the odin download mod also
ODIN mode is also not opening without usb cavle mean opening when plugged into charging.
please help me ,-_-,
, ,

Xperia Z Rom GT-I9082
Which CWM i recovery i use please tell me
i'm using CWM 6.0.2 recovery but when try to install i stuck in installing screen and then automatically back in recovery mode.
MD5 not found

yogeshp007 said:
Which CWM i recovery i use please tell me
i'm using CWM 6.0.2 recovery but when try to install i stuck in installing screen and then automatically back in recovery mode.
MD5 not found
Click to expand...
Click to collapse
Ik think that the CWM version is to old.
Also if you want to go to lollipop later then you can't do this with CWM 6.0.2.
Download a new CWM with an minimum version 6.4.5 or TWRP 2.8.6.0.
Never tried to install the older version roms with TWRP but with CWM I was able to install all.

Installing Rom
Sir i want to install xperia z rom please help me!!
tell me in details please

[Q] Problem Installing ANY AOSP Roms

Hey guys. I have a problem installing any AOSP based roms after upgrading to stock KK.
Here's what i did previously:
1. Upgrade KK using flashtool CSE method
2. Root using towelroot (tried using framaroot before but it was failed)
3. unlock bootloader using freegee, mako unlock and install TWRP
4. flash twrp multirom
5. made a nandroid backup
6. wipe data, cache, etc
7. install carbon rom, pa gapps
8. reboot
now my device stuck on boot animation. i've waited for an hour, nothing happened.. I've tried carbon, omni, CM, 4.4.4 and 4.4.2 version, all failed. However, i was able to install artmod without problem.
i wonder what went wrong? is it something to do with partition? can anyone help me please?
Thanks.

grunch21 said:
Hey guys. I have a problem installing any AOSP based roms after upgrading to stock KK.
Here's what i did previously:
1. Upgrade KK using flashtool CSE method
2. Root using towelroot (tried using framaroot before but it was failed)
3. unlock bootloader using freegee, mako unlock and install TWRP
4. flash twrp multirom
5. made a nandroid backup
6. wipe data, cache, etc
7. install carbon rom, pa gapps
8. reboot
now my device stuck on boot animation. i've waited for an hour, nothing happened.. I've tried carbon, omni, CM, 4.4.4 and 4.4.2 version, all failed. However, i was able to install artmod without problem.
i wonder what went wrong? is it something to do with partition? can anyone help me please?
Thanks.
Click to expand...
Click to collapse
Boot into Recovery > Factory Reset > Wipe Cache > Wipe Dalvik > Flash Rom > Flash Gapps > Reboot System

erkasmoter said:
Boot into Recovery > Factory Reset > Wipe Cache > Wipe Dalvik > Flash Rom > Flash Gapps > Reboot System
Click to expand...
Click to collapse
Well, i think i know the standard procedure, having flashed roms countless times before. But thanks anyway.
Just an update, i tried to flash gproj rom. It was successfully installed, but i got no data and wifi working. So probably it's modem problem. Hopefully someone can help me here..

Just try with a different recovery, like Philz touch.

nlooooo said:
Just try with a different recovery, like Philz touch.
Click to expand...
Click to collapse
I've tried that too. Phillz's, CWM, all don't work. Still stuck on boot ani.

grunch21 said:
I've tried that too. Phillz's, CWM, all don't work. Still stuck on boot ani.
Click to expand...
Click to collapse
That happens to me too

In my case, GPROJ works fine but GEEB get stuck at the logo only. Maybe you are only using GEEB ROM, or vice versa.
For example SLIM LP v0.6 uses GPROJ and v0.7 uses GEEB. v0.6 works fine for me and v0.7 doesn't work. Same with BLISSPOP v3.4(gproj) and v4(geeb).
I wonder if there's a way to use GEEB.
I have a E970.