This thread is to keep the PAC-man development thread clean.
First check the PAC FAQ for Xperia RAY to see if your question has been anwsered there ---- orum.xda-developers.com/showthread.php?t=1965674
When posting in here all XDA forum rules apply as usual. This thread is to help eachother, please no flaming of any sort.
If you are not aware of the FORUM RULES click HERE
wedgess said:
This thread is to keep the PAC-man development thread clean.
First check the PAC FAQ for Xperia RAY to see if your question has been anwsered there ---- orum.xda-developers.com/showthread.php?t=1965674
When posting in here all XDA forum rules apply as usual. This thread is to help eachother, please no flaming of any sort.
If you are not aware of the FORUM RULES click HERE
Click to expand...
Click to collapse
The ROm is great and no random reboot. trying to daily use... for a couple question, it is support themes for CM10.1??
arc_n_krizt said:
The ROm is great and no random reboot. trying to daily use... for a couple question, it is support themes for CM10.1??
Click to expand...
Click to collapse
Finally some one who uses the Q&A.yes it should support AOKP/CM themes.
I'm thinking test your ROM, but whats is the kernel included in the zip file?
Lupus v11? 3.X Kernel?
The main post said dont work JB Camera (4.2.2). There is other camera app included in ROM (CM camera 4.1.2 perhaps) or we must install other third party camera app.
setup wizard pac-man
Hey I flashed the inkludet kernel and did a full wipe and installed the ROM. The Rom boots but then the Setup Wizard does not respond and I cant set upp my phone. A tested this tvice and then re downloadet the rom but got the same results.Is it only me or are others having the same problem Im comming from a nother JB 4.2.2. rom if that helps. I realy want to try this rom and a realy like your work, been using lupus kernel for a long time now. Thanks
device: Lt18i last rom: CM 10.1
ghostmirror said:
I'm thinking test your ROM, but whats is the kernel included in the zip file?
Lupus v11? 3.X Kernel?
The main post said dont work JB Camera (4.2.2). There is other camera app included in ROM (CM camera 4.1.2 perhaps) or we must install other third party camera app.
Click to expand...
Click to collapse
No its nAa kernel as I havent started on a 3.x kernel. Of course there is legacy camera like in cm10 included in the R no need to flash extras.
dimmalimm said:
Hey I flashed the inkludet kernel and did a full wipe and installed the ROM. The Rom boots but then the Setup Wizard does not respond and I cant set upp my phone. A tested this tvice and then re downloadet the rom but got the same results.Is it only me or are others having the same problem Im comming from a nother JB 4.2.2. rom if that helps. I realy want to try this rom and a realy like your work, been using lupus kernel for a long time now. Thanks
device: Lt18i last rom: CM 10.1
Click to expand...
Click to collapse
Others seem to be having no problems. Perhaps its something to do with gapps. I'm assuming you used full gapps. Try the mini or light version of gapps. So long as u done your full wipes I can't see any other reason. Maybe try flash ROM let it boot then go back to recovery and flash gapps.
Edit - OK so apparently light gapps just causes FC'ing I'll link to other gapps when I'm home.
i flashed this ROM with full Gapps in Xperia Arc S, and it's working really fine, until now had twice random reboots, but that's not really a problem to me.
other than that the ROM is awesome. :good:
Q: is it okay if i use Lupus JBv11 Kernel? (qurrently using kernel included in ROM)
thanks in advance
Bagne said:
i flashed this ROM with full Gapps in Xperia Arc S, and it's working really fine, until now had twice random reboots, but that's not really a problem to me.
other than that the ROM is awesome. :good:
Q: is it okay if i use Lupus JBv11 Kernel? (qurrently using kernel included in ROM)
thanks in advance
Click to expand...
Click to collapse
See I'm pretty sure its the kernel giving random reboots. But with LuPuS or Fusion kernel, WiFi and Bluetooth will not work on 4.2.
Hey, one question:
Why the Wifi doesn't work on LuPuS or FusioN Kernel? :/
I#m using Paranoidmod now, because od that...
LuPuS Kernel v11 by wedgess + P.A.C.man by wedgess = Doesn't work?
Bobby2013 said:
Hey, one question:
Why the Wifi doesn't work on LuPuS or FusioN Kernel? :/
I#m using Paranoidmod now, because od that...
LuPuS Kernel v11 by wedgess + P.A.C.man by wedgess = Doesn't work?
Click to expand...
Click to collapse
All 4.2 ROMs changed firmware binaries and changed wifiload script. But... suppose I could try get get kernel to install and use old firmware binaries and run lupus wifiload script?? We will see!! maybe I'll push back kernel update until I give it a go and get someone to test.
wedgess said:
All 4.2 ROMs changed firmware binaries and changed wifiload script. But... suppose I could try get get kernel to install and use old firmware binaries and run lupus wifiload script?? We will see!! maybe I'll push back kernel update until I give it a go and get someone to test.
Click to expand...
Click to collapse
Okay that would be very nice
And if you'll need a tester I will be your man
Thanks very much
EDIT: The LuPuS kernel works nearly perfect with Paranoidrom, but not with CM10.1, PAC and AOKP...really?!
Bobby2013 said:
Okay that would be very nice
And if you'll need a tester I will be your man
Thanks very much
EDIT: The LuPuS kernel works nearly perfect with Paranoidrom, but not with CM10.1, PAC and AOKP...really?!
Click to expand...
Click to collapse
Paranoid was last updated before 3.x kernels were released.
Sent from my PAC-ed LT18i.
Press the thanks button if I helped.
wedgess said:
No its nAa kernel as I havent started on a 3.x kernel. Of course there is legacy camera like in cm10 included in the R no need to flash extras.
Others seem to be having no problems. Perhaps its something to do with gapps. I'm assuming you used full gapps. Try the mini or light version of gapps. So long as u done your full wipes I can't see any other reason. Maybe try flash ROM let it boot then go back to recovery and flash gapps.
Edit - OK so apparently light gapps just causes FC'ing I'll link to other gapps when I'm home.
Click to expand...
Click to collapse
I instal the ROM with full gapps and it is running fine now. In one day of testing I got one fc and one random reeboot. Thanks for the info.
Sent from my Xperia Arc S using xda app-developers app
wedgess said:
All 4.2 ROMs changed firmware binaries and changed wifiload script. But... suppose I could try get get kernel to install and use old firmware binaries and run lupus wifiload script?? We will see!! maybe I'll push back kernel update until I give it a go and get someone to test.
Click to expand...
Click to collapse
yea do this as soon as possible. 2.6 kernel + cm10.1 = Super Awesome and stable
Sent from my Xperia Arc using xda premium
Hi,
May I also post on the Pro version here? There is no seperate thread for it.
It's my first attempt on a custom rom after using stock ICS. Unfortunately, I found it to be very unstable
My first attempt was Lupus/v21, now I'm on Fusion/v22. Both seem to be highly unstable. Just using apps is normally fine, but a few things seem to provoke lockups including unlocking the screen, listening to music and using the camera.
I did a full wipe before installing (system, cache, dalvik cache, data), I even tried the permissions fix.
Otherwise it seems a great rom, perfect feature set and very fast, but the unstability makes it unusable for me
Sent from my Xperia Pro using xda app-developers app
theNfan said:
Hi,
May I also post on the Pro version here? There is no seperate thread for it.
It's my first attempt on a custom rom after using stock ICS. Unfortunately, I found it to be very unstable
My first attempt was Lupus/v21, now I'm on Fusion/v22. Both seem to be highly unstable. Just using apps is normally fine, but a few things seem to provoke lockups including unlocking the screen, listening to music and using the camera.
I did a full wipe before installing (system, cache, dalvik cache, data), I even tried the permissions fix.
Otherwise it seems a great rom, perfect feature set and very fast, but the unstability makes it unusable for me
Sent from my Xperia Pro using xda app-developers app
Click to expand...
Click to collapse
Yes u can post here also. Comparing any 4.2 ROM to STOCK ICS, stock ICS would be the winner in terms of stability. 4.1 is the best if you want JB IMO. But 4.2 and especially PAC 4.2 has a lot more features, customization amongst other things. It doesn't matter on the kernel its going to be the same. This is why FXP stopped developing after CM10 for the XPERIA 2011 line-up. It will never be 100% stable as will any 4.2 ROM for Xperia 2011.
I don't know what calls you stabillity, but 4.1 is very stable, almost as 4.0. 4.2 isn't stable specially with 3.x kernels, but 4.1 is perfect. And FXP stop the development for 2011 line becase they have to develop for a lot of devices, i think.
sinholueiro said:
I don't know what calls you stabillity, but 4.1 is very stable, almost as 4.0. 4.2 isn't stable specially with 3.x kernels, but 4.1 is perfect. And FXP stop the development for 2011 line becase they have to develop for a lot of devices, i think.
Click to expand...
Click to collapse
I said 4.1 is stable. And no they stopped because without a stable 3.x kernel it would be impossible for a stable 4.2 J. There was no 3.x kernel for 2011 device back then, but even still they knew if there was a 3.x kernel it would need a lot of work to get stable, if it even can.
wedgess said:
I said 4.1 is stable. And no they stopped because without a stable 3.x kernel it would be impossible for a stable 4.2 J. There was no 3.x kernel for 2011 device back then, but even still they knew if there was a 3.x kernel it would need a lot of work to get stable, if it even can.
Click to expand...
Click to collapse
But 3.4 kernel is pretty stable now na?
I think that crapy random reboot is the only problem now.
Sent from my arc s using xda premium
jithuelad said:
But 3.4 kernel is pretty stable now na?
I think that crapy random reboot is the only problem now.
Sent from my arc s using xda premium
Click to expand...
Click to collapse
yes and that's instability my friend
Sent from my Xperia Arc S using xda premium
Related
Currently running the latest version of Dark Forest ROM and a slightly too old version of DoomKernel.
I notice that there is some serious performance drops with ICS. Any suggestions on getting this back up to speed? Better ROM to use?
Also, off topic, I haven't been able to find a link to a version of the Beta ROM with WiFi, data, etc enabled and NO OTHER CHANGES. A link would be helpful and I have searched.
Thanks in advance for both requests!
CM9 based roms seem to be the smoothest - AOKP is the best for me. You can try overclocking on darkforest rom and updating your kernel may help alot as well.
Nabeel_Nabs said:
CM9 based roms seem to be the smoothest - AOKP is the best for me. You can try overclocking on darkforest rom and updating your kernel may help alot as well.
Click to expand...
Click to collapse
Thanks! Been meaning to update the kernel but I guess I'm just lazy. I'll get that done and try your other suggestions later but for now I've got a pile of coursework to do. Already overlocked to 1.4 Ghz but I guess the old kernel may be holding me back. Also is there a CM9 available for R800i that supports the gamepads?
Cheers again!
Touchpads do work in all cm9 roms but they're app specific - some apps allow them to work and some do not, it depends on how the app developer implemented them or so I've read.
Can anybody please compare the three (and possibly other) popular custom ROMs? Thanks!
I think every roms are great and smooth, for example Bionic 2, Kezra VP 1.1, Black Note Hybrid 2nd gen, Bagux project, Kedai, FAW rom, and CM9, AOKP, MIUI V4...
Sent from my GT-I8150 using xda premium
erickho0407 said:
Can anybody please compare the three (and possibly other) popular custom ROMs? Thanks!
Click to expand...
Click to collapse
Hmm. If youre referring those 3 as roms, which you probably see in development section, id say nothing much. Miui and aokp are both ported from CM9 which means those 3 are on ICS. The difference though will most likely be seen on how it was modded, themes, tweaked etc.
As alidsd mentioned regarding AOKP, cm9+more customization=AOKP.
Well this is as far as I know. Correct me if im wrong.
Sent from my GT-I8150 using xda premium
Karmalot said:
Hmm. If youre referring those 3 as roms, which you probably see in development section, id say nothing much. Miui and aokp are both ported from CM9 which means those 3 are on ICS. The difference though will most likely be seen on how it was modded, themes, tweaked etc.
As alidsd mentioned regarding AOKP, cm9+more customization=AOKP.
Well this is as far as I know. Correct me if im wrong.
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
ok can i also ask for help?
im kinda new and i have galaxy wonder & im confused @[email protected] i have been reading about this roms like CM9, MIUI V4 & AOKP so as u said "cm9+more customization=AOKP."
now i come across a thread about Kernels now what are this?
there is also 3 types XXLM8 Kernel, DXLM3 Kernel, Cow Kernel...
do i need this to???
what is the difference between kernel and rom?
or do i need them both in my phone?
it says that XXLM8 is best for games...
can you help me by explaining kernels and roms...
and which rom is better? is it CM9 coz MIUI & AOKP is based from CM9? or did MIUI & AOKP fixed the errors CM9 has like camera... in 1 theared it said the camera in CM9 has a problem.. did MIUI & AOKP fixed it????
thank you so much ^_^
inzikmafia said:
ok can i also ask for help?
im kinda new and i have galaxy wonder & im confused @[email protected] i have been reading about this roms like CM9, MIUI V4 & AOKP so as u said "cm9+more customization=AOKP."
now i come across a thread about Kernels now what are this?
there is also 3 types XXLM8 Kernel, DXLM3 Kernel, Cow Kernel...
do i need this to???
what is the difference between kernel and rom?
or do i need them both in my phone?
it says that XXLM8 is best for games...
can you help me by explaining kernels and roms...
and which rom is better? is it CM9 coz MIUI & AOKP is based from CM9? or did MIUI & AOKP fixed the errors CM9 has like camera... in 1 theared it said the camera in CM9 has a problem.. did MIUI & AOKP fixed it????
thank you so much ^_^
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1698751
You can find in there what is rom and kernel. In choosing kernels, it depends on you, as they say, its a trial and error process. As for me, im using DXLM3, its works perfectly for me. Runs smooth, I havent experienced any lag. But then again, it will depend on you. Try them out and experienced for your self. As for rom, I heared the newly release cm9 alpha 4 is bit buggy and unstable, but im pretty sure it will be fixed soon. But if you really want to experience cm9 go for cm9 aplha 3. Aokp and miui as i mentioned are ported from cm9 but with different mods, and more stable atm.
Sent from my GT-I8150 using xda premium
Karmalot said:
http://forum.xda-developers.com/showthread.php?t=1698751
You can find in there what is rom and kernel. In choosing kernels, it depends on you, as they say, its a trial and error process. As for me, im using DXLM3, its works perfectly for me. Runs smooth, I havent experienced any lag. But then again, it will depend on you. Try them out and experienced for your self. As for rom, I heared the newly release cm9 alpha 4 is bit buggy and unstable, but im pretty sure it will be fixed soon. But if you really want to experience cm9 go for cm9 aplha 3. Aokp and miui as i mentioned are ported from cm9 but with different mods, and more stable atm.
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
ok i read the definitions thanx so much..
so i need both Kernel and ROM ^_^
so you are using DXLM3 Kernel what is its benefits based from your exp.?
they say
XXLM8 Kernel (good for games)
Cow Kernel (good battery life span)
DXLM3 Kernel (what benefits?) ^_^
what ROM are you using right now?
MIUI & aokp was ported from CM9 alfa 3 or 4?
based from your trial and error which worked better and no bugs
MIUI, AOKP or Alfa3? i still cant do trial and error coz im still reading how to do it and some of the steps i really dont understand doing.. ^_^
Karmalot said:
Hmm. If youre referring those 3 as roms, which you probably see in development section, id say nothing much. Miui and aokp are both ported from CM9 which means those 3 are on ICS. The difference though will most likely be seen on how it was modded, themes, tweaked etc.
As alidsd mentioned regarding AOKP, cm9+more customization=AOKP.
Well this is as far as I know. Correct me if im wrong.
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
Ok, thanks!
inzikmafia said:
ok i read the definitions thanx so much..
so i need both Kernel and ROM ^_^
so you are using DXLM3 Kernel what is its benefits based from your exp.?
they say
XXLM8 Kernel (good for games)
Cow Kernel (good battery life span)
DXLM3 Kernel (what benefits?) ^_^
what ROM are you using right now?
MIUI & aokp was ported from CM9 alfa 3 or 4?
based from your trial and error which worked better and no bugs
MIUI, AOKP or Alfa3? i still cant do trial and error coz im still reading how to do it and some of the steps i really dont understand doing.. ^_^
Click to expand...
Click to collapse
but be careful, you cannot use GB kernels on ICS ROMs and you cannot use ICS kernels on GB ROMs because GB and ICS has different ramdisk, drivers, etc...
as far as i know, kernels that available for GT-I8150 are:
- stock GB kernels (XXLM8, DXLM3, etc)
- CWG GB kernels (OC and non-OC version)
- arco's ICS kernel
usually if you download ROMs here, they also have the kernel included, so you don't have to flash the kernel separately... except if you want to some experiment, you could flash different kernel after flashing the ROM... for example, after you're finished flashing XXLM8 stock GB ROM, you want to experiment with CWG kernel, so you should flash the CWG kernel only after finished flashing the XXLM8 ROM...
Sent from my GT-I8150 using xda premium
inzikmafia said:
ok i read the definitions thanx so much..
so i need both Kernel and ROM ^_^
so you are using DXLM3 Kernel what is its benefits based from your exp.?
they say
XXLM8 Kernel (good for games)
Cow Kernel (good battery life span)
DXLM3 Kernel (what benefits?) ^_^
what ROM are you using right now?
MIUI & aokp was ported from CM9 alfa 3 or 4?
based from your trial and error which worked better and no bugs
MIUI, AOKP or Alfa3? i still cant do trial and error coz im still reading how to do it and some of the steps i really dont understand doing.. ^_^
Click to expand...
Click to collapse
Yes you need both kernel and rom. But dont worry about it, if you flash rom, its likely that the developer already updated the kernel of the rom you are going to flash. But of course if you dont feel like it, there is called flashing of kernel on your desired rom. But the problem is, not all kernels are compatible to different roms. So take time to read updates. As for my kernel dxlm3, for me, its fast, smooth, no lags, also good for games though im not avid gamer. Its a stock kernel so its stable and i havent encountered any issues at all.
I havent tried cm9 yet coz I needed the camera. But I did try miui released by alidsd, but the camera as well is not yet fully working so I have to switch back to my stock rom. And the latest released aokp by alidsd is the one Im going to test later on, havent tried it yet coz im busy.
Of course there will be bugs on newly released roms like cm9, miui and aokp since they are still on the process of development. :beer:
Sent from my GT-I8150 using xda premium
edit: nvm delete thread.
JellyBean isn't fully stable on our DHD/I4G just yet. There are always going to be some issues because HTC didn't give us a full 3.0 kernel for ICS. That could be the reason you are experiencing some lag. Kernels could also help you, try the KangBang performance kernel, although the kernel is leaning towards performance, so it could cause instability
I bought the xda app. Problem?
...
I can't link to the kernel (cause I'm lazy and on the xda app). But when you install a kernel wipe your cache and Dalvik Cache and then flash. That's the proper way of flashing a kernel
I bought the xda app. Problem?
...
sullyy94 said:
Hey thanks for the reply, yeah i successfully installed the stable and performance kernel from this thread : http://forum.xda-developers.com/showthread.php?t=1931386
But the gaming performance still lags compared to 2.3.5. I guess its due to not being fully stable yet.
I had an idea, what if i flash the stock 2.3.5 kernel? Would i get stock performance back or not?
Click to expand...
Click to collapse
You'll ruin your phone. A 2.3.X kernel I'd meant for that specific version of Android. If you mix versions (e.g. a Gingerbread kernel with a Jelly Bean ROM) you'll most likely get bootloops and your phone. At worst you'll brick your phone. Don't ever mix kernel versions. Also don't flash a Sense kernel on a AOSP/AOKP/CyanogenMod based ROM (or vice versa), you'll also have a phone that won't boot.
I bought the xda app. Problem?
...
sullyy94 said:
Hey, thanks for the reply. Yeah I was guessing it had something to do with the kernel. I tried a kernel yesterday not sure which one it was from memory, but when I put the kernel zip onto the phone and installed it through recovery it said install complete. But when I rebooted the phone it gets stuck on a black screen. I can't do anything else unless I take the battery out. I was wondering if anyone can give me a link to the kangbang kernel and instructions in how to install properly if the recovery mode isn't the right way, even though it said kernel updated successfuly. Thanks!
Click to expand...
Click to collapse
The only compatible alternative kernel for JB is the KangBang (at least that i know of). If you flashed another one, that might be why it booted to a black screen.
...
Hello,
i`m new here with a a100.
I´m ready to flash after root, unlock bootloader and install recovery.
So my question is here in the jungle of rom`s:
Witch rom is in the moment the best usefull and completly work with all stuff in the a100?
I read some threads but for me its very difficult to find out.
Please help.
frischeis
The CM10 builds from pio_masaki are running great. I recommend you to use it together with the gm_2.0 Kernel.
depredations ancrean
dtrail1 said:
The CM10 builds from pio_masaki are running great. I recommend you to use it together with the gm_2.0 Kernel.
Click to expand...
Click to collapse
Thanks for the information!!
I read a bit this tread before i start this post here.
Okay so i will try to install this:
Build 3 Linaro Tablet UI Modded FINAL
+
gapps-jb-20121011-signed.zip
right?
But what you mean with gm_2.0 kernel?
Is this included in the rom or i must flash this separately after install the rom+gapps?
Where can i download?
Sorry for my odd questions but i will do all right...
Hi frischeis and welcome!
Keep in mind the CM10 builds are not "officially" supported so there is the odd quirk here and there, overall all of the CM10 roms here are running pretty good. In terms of Pio's roms, he suggests using the kernel that is already packaged in his roms. The gm_2.0 kernel is a kernel that was developed with CM10 in mind: http://forum.xda-developers.com/showthread.php?t=1818924 and some say don't work well with his ROMS which is ok, because the prepackaged kernels in those ROMs are rock solid.
Also note that the CM10 roms are not ICS, they are Jellybean roms. There are still a few ICS roms out there if that is what you are interested in: These are listed from newest to oldest:
http://forum.xda-developers.com/showthread.php?t=2042725
http://forum.xda-developers.com/showthread.php?t=2008292
http://forum.xda-developers.com/showthread.php?t=1589034
http://forum.xda-developers.com/showthread.php?t=1629453
hardslog said:
Hi frischeis and welcome!
Keep in mind the CM10 builds are not "officially" supported so there is the odd quirk here and there, overall all of the CM10 roms here are running pretty good. In terms of Pio's roms, he suggests using the kernel that is already packaged in his roms. The gm_2.0 kernel is a kernel that was developed with CM10 in mind: http://forum.xda-developers.com/showthread.php?t=1818924 and some say don't work well with his ROMS which is ok, because the prepackaged kernels in those ROMs are rock solid.
Also note that the CM10 roms are not ICS, they are Jellybean roms. There are still a few ICS roms out there if that is what you are interested in: These are listed from newest to oldest:
http://forum.xda-developers.com/showthread.php?t=2042725
http://forum.xda-developers.com/showthread.php?t=2008292
http://forum.xda-developers.com/showthread.php?t=1589034
http://forum.xda-developers.com/showthread.php?t=1629453
Click to expand...
Click to collapse
He pretty much nailed it, if you want a stock ish ICS I'd suggest his keebers work, there's also very outdated but functional CM9 builds around if that's to your liking.
It isn't so much I don't recommend the GM kernel with my roms, it's that I know it has issues that didn't get sorted out and reflects as users reporting Rom issues that aren't Rom issues, and to report issues with the included kernel first. If your setup likes the GM kernel, by all means enjoy it, it's been a great addition to the development on this device.
It also wasn't meant for JB, it was a purely ICS kernel, however our ICS kernels worked on 4.1 with no modding required, so it worked with JB with no changes. Got lucky and Acer had stuff going that ICS didn't need but JB does. It should also work in 4.2 with minimal fuss.
Tapatalked from my HTC DNA
First: Thank you pio_masaki, hardslog and dtrail1!!
Sorry i made a false statement__i want of course JB 4.1.x not ICS.
Now i have ICS 4.0.3 ota and i want to make a step forward.
You guys will help me to make the decision.
So i will try KEBBERSROM_CMFLEX_V1.2 - Based on 4.1.2/CM10 (03-29-2013) foundet on hardslog post end.
Downloading...
I hope all works fine and i dont brike my tab
frischeis said:
First: Thank you pio_masaki, hardslog and dtrail1!!
Sorry i made a false statement__i want of course JB 4.1.x not ICS.
Now i have ICS 4.0.3 ota and i want to make a step forward.
You guys will help me to make the decision.
So i will try KEBBERSROM_CMFLEX_V1.2 - Based on 4.1.2/CM10 (03-29-2013) foundet on hardslog post end.
Downloading...
I hope all works fine and i dont brike my tab
Click to expand...
Click to collapse
Just read the instructions, don't flash stock roms, and you'll be fine. Enjoy it.:beer:
Tapatalked from my HTC DNA
So after flashing the first impression is:
GREAT!!!!!
So all in all __ awesome.
Thanks again!
For me the gm kernel works very well with CM10. Nothing to report until now - but I'm running for 2 days now.... Let's see.
Gesendet von meinem XT910 mit Tapatalk 2
I'd recommend flashing different ROMs to see what you like. I like baked, and cm10 but I like the dark theme and on baked you can switch from tab UK and phab. Which is nice. Should help my tab last a while longer....lol the gm kernels have worked for me for quite a while. He had an over clock to. 1.7 MHz too.... no wonder his tab died...lol I think I still have a copy on my SD card! They run best on the older boards. So the community says. But my new one likes it. Over clock to 1.2 and lionheart and boom. I did like green ICS. And cm9 was a consistent winner. Cm10 has come a long way...
Sent from my vangogh using xda app-developers app
Everybody talk about the gm_2.0 Kernel.
So i have flashed KEBBERSROM_CMFLEX_V1.2 - Based on 4.1.2/CM10.
So is this kernel included or i must flash separately?
One issue two times i have with this rom: i got this notification: "Trebuchet is closed" and i dont come on the homescreen.
Only over the status bar-settings-apps i reset trebuchet and it works normaly.
I dont no was happend...
frischeis said:
Everybody talk about the gm_2.0 Kernel.
So i have flashed KEBBERSROM_CMFLEX_V1.2 - Based on 4.1.2/CM10.
So is this kernel included or i must flash separately?
One issue two times i have with this rom: i got this notification: "Trebuchet is closed" and i dont come on the homescreen.
Only over the status bar-settings-apps i reset trebuchet and it works normaly.
I dont no was happend...
Click to expand...
Click to collapse
That launcher is buggy. Install and use Nova or Apex launcher and you won't have to worry about the force close.
Godmachine kernel is not in this ROM, it is packing ezTerrys version, which is the source for GodMachines kernel.
So technically it is almost the same but older and not tweaked as much. Solid kernel on this ROM.
Sent from my LG-P999 using xda premium
Thanks!
I will try out...
Also don't disable Google search bar in trebuchet or it'll constantly crash. Another launcher would be better but to stop that particular issue, leave Google search bar enabled.
Tapatalked from my HTC DNA
So i change the launcher.
Now i have nova launcher_works good.
In the moment no buggy situations.
:good:
Keep in mind though that this ROM isn't perfect. There are a few albeit very minor quirks. I have the issues in the OP of thread.
So what is your opinion about a Rom with JB 4.1.x
Witch one is your favorit?
Or better witch one has no bugs?
frischeis said:
So what is your opinion about a Rom with JB 4.1.x
Witch one is your favorit?
Or better witch one has no bugs?
Click to expand...
Click to collapse
There is no bugless 4.1 as there wasn't one made for us, it's all done by developers on their own time. It more like, which bugs can you live with, most any of the 4.1 are daily drivable.
Tapatalked from my HTC DNA
So which rom has the fewest bugs?
I now is a difficult question.
And - or a better question:
In which rom is the further development or is the tablet too old to develop it further?
Which rom is pushing forward?
I read in some threads development is terminated!??
--------------------------------------------------------------------
At the moment I must say I am very satisfied with the KEBBERSROM_CMFLEX_V1.2!
So thank you again for to work behind the stage!!!
Some stopped development, yes. I'm going to start 4.2.2 builds soon...
"soon" doesn't mean that these builds will be available soon. I have to start from scratch..
Gesendet von meinem XT910 mit Tapatalk 2
Unofficial-Official JellyBean for P930/935/936
Unofficial-Official JellyBean for P930/935/936 - N2 - with working WiFi. Just clean ROM like original from SU640.
Download: (Need minimum 630mb free size on System part )
http://dfiles.ru/files/w4gujg5ef
For information:
For JellyBean ROM for I-Project need 1Gb system size. So when you flash KDZ it will repart you eMMC.
I unpack KDZ from SU640, and repack System part.
Deleted all Operator Apps and Google Apps, remove SecurityCheck, adapt ROM for GSM, and now size of ROM ~ 630mb. And we can flash it via CWM without problem on old partition table and it working with old MODEM.
I ported new kernel 3.4 from LG F120S and SU640, adaptive it for P930.
My port Sphinx V4.1 - 4.1.2 JB for P930
Probably fix copability with different bootloaders;
Rework battery and charger drivers;
Translated to RUS/UKR
Need 646mb. free space on System part!
Download:
http://dfiles.ru/files/1er0nv65u
First patch for Sphinx ROM
Fix some bugs in sound driver;
Fix proximity sensor;
Some fixes for telephony.
Download: Global_Patch_1.zip
Second patch for Sphinx ROM
Fix random boots during sleep;
Added 2 new LG apps: PhotoAlbum widget + Photo wallpaper;
Restore EasySettings.
Download: Global_Patch_2.zip
Bugs:
Blue screen of death on Widows PC (try different mode connections); - turn-off "USB-debug"
Big thanks All authors who made Sphinx ROM!
Link available!
Awesome, awesome work. Can't wait to have official 4.1.2 on the P930!
miroslav_mm said:
Unofficial-Official JellyBean for P930/935/936
For JellyBean ROM for I-Project need 1Gb system size. So when you flash KDZ it will repart you eMMC.
Click to expand...
Click to collapse
Will this introduce any problems if switching between the already existing ICS, CMx ROMs other than needing the corresponding gapps lite from there on out?
I would be interested in your 3.4 kernel. Do you have the source on github?
I also be interested in his 3.4 kernel
tdmcode said:
I would be interested in your 3.4 kernel. Do you have the source on github?
Click to expand...
Click to collapse
tdmcode said:
I would be interested in your 3.4 kernel. Do you have the source on github?
Click to expand...
Click to collapse
Will available on my Github later.
Who install ROM please install patch_1.zip
If you delete strings from build.prop
ro.build.target_operator=SKT
ro.build.target_country=KR
you will see new settings for GSM and it remove T Roaming Settings.
miroslav_mm said:
Will available on my Github later.
Who install ROM please install patch_1.zip
If you delete strings from build.prop
ro.build.target_operator=SKT
ro.build.target_country=KR
you will see new settings for GSM and it remove T Roaming Settings.
Click to expand...
Click to collapse
Thanks for your work!
I have flashed this rom on my ATT P930，but Phone has been restarted and cant get into system.
so I restore to 20E.
Looking forward to your 3.4 kernel too!
navik said:
Thanks for your work!
Phone has been restarted and cant get into system.
so I restore to 20E.
Click to expand...
Click to collapse
Did you wipe your Phone via recovery? Its working without any problem.
miroslav_mm said:
Did you wipe your Phone via recovery? Its working without any problem.
Click to expand...
Click to collapse
Yeah no problems here. But I did install through CWM and not ROM manager. Out of habit I install new ROMs through CWM due to issues I have had with installing new ROMs through ROM manager.
Sent from my LG-P930 using xda app-developers app
miroslav_mm said:
Did you wipe your Phone via recovery? Its working without any problem.
Click to expand...
Click to collapse
Sure，I used recovery 5.82 and had wiped data ，wipe cache and wipe dalvik cache.
Thanks for reply and your work.
I will try again！
Sent from my LG-SU640 using xda premium
What are the advantages of the 3.4 kernel ? more compatible with JB 4.x.x ?
EDIT: Got the answer here for those interested: http://rootzwiki.com/topic/39958-what-is-the-value-of-the-linux-34-kernel/
Btw, great work.
just1nsama said:
What are the advantages of the 3.4 kernel ? more compatible with JB 4.x.x ?
Click to expand...
Click to collapse
Yes of course. Full ION support, better capability with CAF, JB-camera, full support Adreno (KGSL), bla-bla-bla....
miroslav_mm said:
Yes of course. Full ION support, better capability with CAF, JB-camera, full support Adreno (KGSL), bla-bla-bla....
Click to expand...
Click to collapse
Alight thanks ... i found more specifics here: http://rootzwiki.com/topic/39958-what-is-the-value-of-the-linux-34-kernel/
I see you created the repo on your github, but as of now it is empty, will you be adding the content in the near future ? Would really like to compile a PAC build with it and try it out
Thanks and keep up the good work :good:
Yeah that's all cool but the thing I am hoping to see is more stability. The 2.6.35 kernel was very stable. The 3.0.x kernel is not so stable.
tdmcode said:
Yeah that's all cool but the thing I am hoping to see is more stability. The 2.6.35 kernel was very stable. The 3.0.x kernel is not so stable.
Click to expand...
Click to collapse
Dont know about 2.6.35, but 3.0.x not stable because all using CM kernel for base. CM kernel base on CAF sources, not on LG original sources.
3.4 working very good for me. Battery life and performance on Stock 4.1 are great without any dirty tweaks and patches in kernel!
miroslav_mm said:
Dont know about 2.6.35, but 3.0.x not stable because all using CM kernel for base. CM kernel base on CAF sources, not on LG original sources.
3.4 working very good for me. Battery life and performance on Stock 4.1 are great without any dirty tweaks and patches in kernel!
Click to expand...
Click to collapse
CM took the lu6200 ICS sources and added display stuff from caf.
The original lge ICS ota was unstable for all iproj devices.
I have a weak p930 that will be the judge of the new 3.4 kernel. It reboots about every 5 to 15 minutes under the ics kernel. I will try when I get sources... No sources, no install...
Can't wait to flash this once WiFi is working
I don't have unlimited data and use WiFi a lot.
Flashed this ROM. It looks very good except WIFI issue. Am now testing battery drain. Looking for WiFi fix.
I've been checking this thread every
Hour for a WiFi fix... I use this as a WiFi only device so the lackthereof is a killer right now for me... That being said if anyone has a lead on what's breaking it I would love to help find a fix for the problem. Really never thought we would see a jb release for our device from LG but I believe it will be a major stepping stone for future development of our P93x's. Once again I wanna thank miroslav and all the other great devs and tinkerers who bust their asses to make our phones into beasts, and I look forward to seeing what awesomeness will come with these recent leaks.
Sent from my LG-P930 using xda app-developers app