After I flash XperiaPremiuM™ v1 on my acro s ,can I flash kernels like nova or stock???
joeywen0830 said:
After I flash XperiaPremiuM™ v1 on my acro s ,can I flash kernels like nova or stock???
Click to expand...
Click to collapse
Yes You Should Be Able To Flash Any STOCK and Nova Kernals.
Just as you normally do Using flashtools You can revert back to any stock
or
Flash any Custom ROM from Recovery.
dwarkesh2492 said:
Yes You Should Be Able To Flash Any STOCK and Nova Kernals.
Just as you normally do Using flashtools You can revert back to any stock
or
Flash any Custom ROM from Recovery.
Click to expand...
Click to collapse
Does it also work on other cm10 roms?
joeywen0830 said:
Does it also work on other cm10 roms?
Click to expand...
Click to collapse
Yes It Worked For Me!
Related
Everything find,just the wifi get error...is someone have the same problem?
PS.i flash this rom using 2.3.4(.64) stock kernel...
Are you using doomkernel? If you are you need to flash his wifi modules mate... they can be found in his kernel thread
Any trouble and ill point you in the right direction
Sent from my R800i using XDA
elspanish88 said:
Are you using doomkernel?
Click to expand...
Click to collapse
He said:
Maxil.L said:
PS.i flash this rom using 2.3.4(.64) stock kernel...
Click to expand...
Click to collapse
here http://forum.xda-developers.com/showthread.php?t=1539483 u have
Suggestions:
-Use DooMKernel (v11 for now), with smartassV2, frequency ~364.8-1305.6MHz.
Click to expand...
Click to collapse
try it? maybe its a solution for your problem? its here:
http://forum.xda-developers.com/showthread.php?t=1176502
no,i install at original rom...
I understand that u flash dixperia on stock rom and now u have stock kernel.
I think that u should try a custom kernel and i give u example - doomkernel, which is recommended by them too
Sent using r800i with DoomKernel v10 (1.21ghz)
Dixperia ROM has built in DOOM modules...therefore wont work with stock kernel....either you flash the stock wifi modules which u can find at the doom kernel post...or use the doom kernel...not sure...but try...
Wi-Fi should work on Stock Kernel too, but please try to apply DooMKernel with Wi-Fi fix and reply back how's going after this .
Hi,
I am planning to install PAC 23 Custom ROM.
Currently I unlocked my bootload,rooted and installed "CWM-Based Recovery 6.0.3.2 for Xperia S" by Doomlord.
Should I have to install any kernel/recovery to install PAC? Below link in PAC Rom page is not working(
LATEST BOOT.IMG
Just download the rom.It contains the boot.img.If want to move to 4.2 then first flash img by flashtool & then flash rom
Sent from my GT-I9300 using xda premium
RISHI RAJ said:
Just download the rom.It contains the boot.img.If want to move to 4.2 then first flash img by flashtool & then flash rom
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks. It worked. Successfully installed PAC custom ROM.
One doubt, how to return back to Stock Jelly bean 4.1.1 from 4.2 Pac custom rom(not now after a week, i am planning to switch if I am not comfortable with PAC Rom).
I have stock ttf LT26i_6.2.B.0.211.1257-8080_LBI for Xperia S. Just normal Flash is enough or any other kernel/recover/boot.img needs to be flashed/installed before returning(downgrade) to Stock JB 4.1.1?
Regards,
Chandru.
chandru155 said:
Thanks. It worked. Successfully installed PAC custom ROM.
One doubt, how to return back to Stock Jelly bean 4.1.1 from 4.2 Pac custom rom(not now after a week, i am planning to switch if I am not comfortable with PAC Rom).
I have stock ttf LT26i_6.2.B.0.211.1257-8080_LBI for Xperia S. Just normal Flash is enough or any other kernel/recover/boot.img needs to be flashed/installed before returning(downgrade) to Stock JB 4.1.1?
Regards,
Chandru.
Click to expand...
Click to collapse
Glad it worked.
chandru155 said:
Thanks. It worked. Successfully installed PAC custom ROM.
One doubt, how to return back to Stock Jelly bean 4.1.1 from 4.2 Pac custom rom(not now after a week, i am planning to switch if I am not comfortable with PAC Rom).
I have stock ttf LT26i_6.2.B.0.211.1257-8080_LBI for Xperia S. Just normal Flash is enough or any other kernel/recover/boot.img needs to be flashed/installed before returning(downgrade) to Stock JB 4.1.1?
Regards,
Chandru.
Click to expand...
Click to collapse
it's basically the same process..flash stock boot.img, then wipe data and flash stock rom
Hi everyone,
I've a question: can I flash all the ROMs with DoomKernel and .96 build ?
And if I can',t can I reflash stock kernel? And with this and .96 build can I flash all ROMs or do I need an other build?
Sorry for my bad english
Thanks!
Thecapa97 said:
Hi everyone,
I've a question: can I flash all the ROMs with DoomKernel and .96 build ?
And if I can',t can I reflash stock kernel? And with this and .96 build can I flash all ROMs or do I need an other build?
Sorry for my bad english
Thanks!
Click to expand...
Click to collapse
Are your bootlader unlocked? If the answer is yes, you can flash DoomKernel and you can reflash it to stock if you want to.
Your device is Xperia S? if yes, you can flash all ROMs related to your device in this section http://forum.xda-developers.com/xperia-s/s-development .
toylee1992 said:
Are your bootlader unlocked? If the answer is yes, you can flash DoomKernel and you can reflash it to stock if you want to.
Your device is Xperia S? if yes, you can flash all ROMs related to your device in this section http://forum.xda-developers.com/xperia-s/s-development .
Click to expand...
Click to collapse
Yes, my bootloader is unlocked!
But for exemple: I have the DoomLord kernel... Can I flash the Cm10 or I need the stock kernel?
thanks
Thecapa97 said:
Yes, my bootloader is unlocked!
But for exemple: I have the DoomLord kernel... Can I flash the Cm10 or I need the stock kernel?
thanks
Click to expand...
Click to collapse
For CM10 in XS you can use RaymanFX kernel itself for compatibility for his ROM. But for other ROM you can use DoomLord Kernel.
toylee1992 said:
Are your bootlader unlocked? If the answer is yes, you can flash DoomKernel and you can reflash it to stock if you want to.
Your device is Xperia S? if yes, you can flash all ROMs related to your device in this section http://forum.xda-developers.com/xperia-s/s-development .
Click to expand...
Click to collapse
toylee1992 said:
For CM10 in XS you can use RaymanFX kernel itself for compatibility for his ROM. But for other ROM you can use DoomLord Kernel.
Click to expand...
Click to collapse
I have to flash the kernel before flash the CM?
Thecapa97 said:
I have to flash the kernel before flash the CM?
Click to expand...
Click to collapse
Uh, I think CM ROM has a built-in kernel. All you need is Recovery to flash it.
Here's the instruction for CM10 by FXP http://forum.xda-developers.com/showpost.php?p=28942161&postcount=2
But if you're using different ROM like Trinity Vengeance or eXistenZ you can use DoomKernel.
toylee1992 said:
Uh, I think CM ROM has a built-in kernel. All you need is Recovery to flash it.
Here's the instruction for CM10 by FXP http://forum.xda-developers.com/showpost.php?p=28942161&postcount=2
But if you're using different ROM like Trinity Vengeance or eXistenZ you can use DoomKernel.
Click to expand...
Click to collapse
Thanks!
I've re-flashed the stock kernel... now I'm going to install cm10
I think all is ok, now
Can I Flash Stock FTF 4.1.2 (6.2.B.1.96) Through CWM On My Xperia SL?
Thanks In Advance...
Currently On Stock Based Trinity Vengance Rom 3.1 Android 4.1.2 Rooted CWM Installed
Sorry For My Bad English..
Nauju said:
Can I Flash Stock FTF 4.1.2 (6.2.B.1.96) Through CWM On My Xperia SL?
Thanks In Advance...
Currently On Stock Based Trinity Vengance Rom 3.1 Android 4.1.2 Rooted CWM Installed
Sorry For My Bad English..
Click to expand...
Click to collapse
You can't flash a ftf file in cwm, but there are flashable stock roms available like this - http://forum.xda-developers.com/showthread.php?t=2425192
Sent from my LT26i using Tapatalk
Use Flashtool. It's the best and safest way. Dont flash a ROM, through CWM.
That's Right!!
Mr.AnakinSkywalker said:
Use Flashtool. It's the best and safest way. Dont flash a ROM, through CWM.
Click to expand...
Click to collapse
That's Right!! flashing using flashtool is the safest way but i'm afraid of rooting the device again.. its a big task for me...
suggest me the easy rooting and also which kernel should i flash..
ROM?????????????????
Bro, which rom u currently using...
(Asking experts to do better)
Sent from my LT26i using Tapatalk[/QUOTE]
Nauju said:
Bro, which rom u currently using...
(Asking experts to do better)
Sent from my LT26i using Tapatalk
Click to expand...
Click to collapse
why would you want to flash stock rom via cwm?ok let me understand currently...you wanna install stock rom and retain root and cwm after flashing??
Yes ofcourse..
Dark Wraith said:
why would you want to flash stock rom via cwm?ok let me understand currently...you wanna install stock rom and retain root and cwm after flashing??
Click to expand...
Click to collapse
Yaa thats what i need!!!! Suggest me a way..
Sorry for my bad english..
Nauju said:
Yaa thats what i need!!!! Suggest me a way..
Sorry for my bad english..
Click to expand...
Click to collapse
Flash stock .96 FW via flashtools....
Flash recovery by doomlord or doomkernel for either locked Bl or unlocked depending upon your bootloader..This way you'll retain .96 FW and CWM..via CWM fix root permissions...and you get what you wanted...
Nauju said:
Can I Flash Stock FTF 4.1.2 (6.2.B.1.96) Through CWM On My Xperia SL?
Thanks In Advance...
Currently On Stock Based Trinity Vengance Rom 3.1 Android 4.1.2 Rooted CWM Installed
Sorry For My Bad English..
Click to expand...
Click to collapse
you can flash the stock Xperia SL ROM trough flashtool, set you phone into flashmode and flash the stock ROM
Is it possible to acquire flashable original stock kernel from FW I9195XXUBML4 ?
is that a jellybean rom? if so you can flash it onto stock jellybean roms only. If u are using kitkat or any rom other than stock jb then u cannot flash it. good luck
Ruwy said:
Is it possible to acquire flashable original stock kernel from FW I9195XXUBML4 ?
Click to expand...
Click to collapse
Yes, thanks to TheBootloader. http://forum.xda-developers.com/galaxy-s4-mini/development/kernel-brisk-v1-drain-patches-t2852609 download it here it's called "samsung_jb.zip"