Is it possible to acquire flashable original stock kernel from FW I9195XXUBML4 ?
is that a jellybean rom? if so you can flash it onto stock jellybean roms only. If u are using kitkat or any rom other than stock jb then u cannot flash it. good luck
Ruwy said:
Is it possible to acquire flashable original stock kernel from FW I9195XXUBML4 ?
Click to expand...
Click to collapse
Yes, thanks to TheBootloader. http://forum.xda-developers.com/galaxy-s4-mini/development/kernel-brisk-v1-drain-patches-t2852609 download it here it's called "samsung_jb.zip"
Related
I have c6503 model.Build no. is10.1.A.1.434. Bought officially in the Philippines. Planning to flash one of the few custom ROMs available. Just for backup purposes, which stock ROM should I flash when I feel like it? Are those FTF files the stock roms? If so, the only available stock ROMs for 6503 are Nordic version.
Same question that I had!
Is it possible to flash a stock ROM and still have root access?
check in the android device section... there is a list there for the available stock roms with download links
Sent from my C6506 using xda app-developers app
TinySarabia said:
I have c6503 model.Build no. is10.1.A.1.434. Bought officially in the Philippines. Planning to flash one of the few custom ROMs available. Just for backup purposes, which stock ROM should I flash when I feel like it? Are those FTF files the stock roms? If so, the only available stock ROMs for 6503 are Nordic version.
Click to expand...
Click to collapse
if you would like stock based roms there are plenty of that.. go to threads android develpoment for ur device.. pinoy din ako..
"which stock ROM should I flash when I feel like it?" based on ur firmware as always..so choose wisely..
"Are those FTF files the stock roms?" yes,its the stock FW..FTF file are flashable FW using flashtool..
if i helped you just press ""THANKS""
So far the only stock .434 for c6503 is the Nordic firmware. Here's a list compiled by hyelton on the stock ZL firmware.
Hi,
I am planning to install PAC 23 Custom ROM.
Currently I unlocked my bootload,rooted and installed "CWM-Based Recovery 6.0.3.2 for Xperia S" by Doomlord.
Should I have to install any kernel/recovery to install PAC? Below link in PAC Rom page is not working(
LATEST BOOT.IMG
Just download the rom.It contains the boot.img.If want to move to 4.2 then first flash img by flashtool & then flash rom
Sent from my GT-I9300 using xda premium
RISHI RAJ said:
Just download the rom.It contains the boot.img.If want to move to 4.2 then first flash img by flashtool & then flash rom
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks. It worked. Successfully installed PAC custom ROM.
One doubt, how to return back to Stock Jelly bean 4.1.1 from 4.2 Pac custom rom(not now after a week, i am planning to switch if I am not comfortable with PAC Rom).
I have stock ttf LT26i_6.2.B.0.211.1257-8080_LBI for Xperia S. Just normal Flash is enough or any other kernel/recover/boot.img needs to be flashed/installed before returning(downgrade) to Stock JB 4.1.1?
Regards,
Chandru.
chandru155 said:
Thanks. It worked. Successfully installed PAC custom ROM.
One doubt, how to return back to Stock Jelly bean 4.1.1 from 4.2 Pac custom rom(not now after a week, i am planning to switch if I am not comfortable with PAC Rom).
I have stock ttf LT26i_6.2.B.0.211.1257-8080_LBI for Xperia S. Just normal Flash is enough or any other kernel/recover/boot.img needs to be flashed/installed before returning(downgrade) to Stock JB 4.1.1?
Regards,
Chandru.
Click to expand...
Click to collapse
Glad it worked.
chandru155 said:
Thanks. It worked. Successfully installed PAC custom ROM.
One doubt, how to return back to Stock Jelly bean 4.1.1 from 4.2 Pac custom rom(not now after a week, i am planning to switch if I am not comfortable with PAC Rom).
I have stock ttf LT26i_6.2.B.0.211.1257-8080_LBI for Xperia S. Just normal Flash is enough or any other kernel/recover/boot.img needs to be flashed/installed before returning(downgrade) to Stock JB 4.1.1?
Regards,
Chandru.
Click to expand...
Click to collapse
it's basically the same process..flash stock boot.img, then wipe data and flash stock rom
Hi everyone,
I've a question: can I flash all the ROMs with DoomKernel and .96 build ?
And if I can',t can I reflash stock kernel? And with this and .96 build can I flash all ROMs or do I need an other build?
Sorry for my bad english
Thanks!
Thecapa97 said:
Hi everyone,
I've a question: can I flash all the ROMs with DoomKernel and .96 build ?
And if I can',t can I reflash stock kernel? And with this and .96 build can I flash all ROMs or do I need an other build?
Sorry for my bad english
Thanks!
Click to expand...
Click to collapse
Are your bootlader unlocked? If the answer is yes, you can flash DoomKernel and you can reflash it to stock if you want to.
Your device is Xperia S? if yes, you can flash all ROMs related to your device in this section http://forum.xda-developers.com/xperia-s/s-development .
toylee1992 said:
Are your bootlader unlocked? If the answer is yes, you can flash DoomKernel and you can reflash it to stock if you want to.
Your device is Xperia S? if yes, you can flash all ROMs related to your device in this section http://forum.xda-developers.com/xperia-s/s-development .
Click to expand...
Click to collapse
Yes, my bootloader is unlocked!
But for exemple: I have the DoomLord kernel... Can I flash the Cm10 or I need the stock kernel?
thanks
Thecapa97 said:
Yes, my bootloader is unlocked!
But for exemple: I have the DoomLord kernel... Can I flash the Cm10 or I need the stock kernel?
thanks
Click to expand...
Click to collapse
For CM10 in XS you can use RaymanFX kernel itself for compatibility for his ROM. But for other ROM you can use DoomLord Kernel.
toylee1992 said:
Are your bootlader unlocked? If the answer is yes, you can flash DoomKernel and you can reflash it to stock if you want to.
Your device is Xperia S? if yes, you can flash all ROMs related to your device in this section http://forum.xda-developers.com/xperia-s/s-development .
Click to expand...
Click to collapse
toylee1992 said:
For CM10 in XS you can use RaymanFX kernel itself for compatibility for his ROM. But for other ROM you can use DoomLord Kernel.
Click to expand...
Click to collapse
I have to flash the kernel before flash the CM?
Thecapa97 said:
I have to flash the kernel before flash the CM?
Click to expand...
Click to collapse
Uh, I think CM ROM has a built-in kernel. All you need is Recovery to flash it.
Here's the instruction for CM10 by FXP http://forum.xda-developers.com/showpost.php?p=28942161&postcount=2
But if you're using different ROM like Trinity Vengeance or eXistenZ you can use DoomKernel.
toylee1992 said:
Uh, I think CM ROM has a built-in kernel. All you need is Recovery to flash it.
Here's the instruction for CM10 by FXP http://forum.xda-developers.com/showpost.php?p=28942161&postcount=2
But if you're using different ROM like Trinity Vengeance or eXistenZ you can use DoomKernel.
Click to expand...
Click to collapse
Thanks!
I've re-flashed the stock kernel... now I'm going to install cm10
I think all is ok, now
Can I Flash Stock FTF 4.1.2 (6.2.B.1.96) Through CWM On My Xperia SL?
Thanks In Advance...
Currently On Stock Based Trinity Vengance Rom 3.1 Android 4.1.2 Rooted CWM Installed
Sorry For My Bad English..
Nauju said:
Can I Flash Stock FTF 4.1.2 (6.2.B.1.96) Through CWM On My Xperia SL?
Thanks In Advance...
Currently On Stock Based Trinity Vengance Rom 3.1 Android 4.1.2 Rooted CWM Installed
Sorry For My Bad English..
Click to expand...
Click to collapse
You can't flash a ftf file in cwm, but there are flashable stock roms available like this - http://forum.xda-developers.com/showthread.php?t=2425192
Sent from my LT26i using Tapatalk
Use Flashtool. It's the best and safest way. Dont flash a ROM, through CWM.
That's Right!!
Mr.AnakinSkywalker said:
Use Flashtool. It's the best and safest way. Dont flash a ROM, through CWM.
Click to expand...
Click to collapse
That's Right!! flashing using flashtool is the safest way but i'm afraid of rooting the device again.. its a big task for me...
suggest me the easy rooting and also which kernel should i flash..
ROM?????????????????
Bro, which rom u currently using...
(Asking experts to do better)
Sent from my LT26i using Tapatalk[/QUOTE]
Nauju said:
Bro, which rom u currently using...
(Asking experts to do better)
Sent from my LT26i using Tapatalk
Click to expand...
Click to collapse
why would you want to flash stock rom via cwm?ok let me understand currently...you wanna install stock rom and retain root and cwm after flashing??
Yes ofcourse..
Dark Wraith said:
why would you want to flash stock rom via cwm?ok let me understand currently...you wanna install stock rom and retain root and cwm after flashing??
Click to expand...
Click to collapse
Yaa thats what i need!!!! Suggest me a way..
Sorry for my bad english..
Nauju said:
Yaa thats what i need!!!! Suggest me a way..
Sorry for my bad english..
Click to expand...
Click to collapse
Flash stock .96 FW via flashtools....
Flash recovery by doomlord or doomkernel for either locked Bl or unlocked depending upon your bootloader..This way you'll retain .96 FW and CWM..via CWM fix root permissions...and you get what you wanted...
Nauju said:
Can I Flash Stock FTF 4.1.2 (6.2.B.1.96) Through CWM On My Xperia SL?
Thanks In Advance...
Currently On Stock Based Trinity Vengance Rom 3.1 Android 4.1.2 Rooted CWM Installed
Sorry For My Bad English..
Click to expand...
Click to collapse
you can flash the stock Xperia SL ROM trough flashtool, set you phone into flashmode and flash the stock ROM
how to downgrade to stock 4.1.2... i m on genxt rom using touch cwm... help plzzz?
shubhamverma27 said:
how to downgrade to stock 4.1.2... i m on genxt rom using touch cwm... help plzzz?
Click to expand...
Click to collapse
download stock firmware 4.1.2 from sammobile.com and flash it with odin or from this thread you can download stock firmware flashable via CWM