Hi there,
I have a very big problem after flashing the nightlies from the 05.25.
The LG Logo shows up twice and no cyanogen bootscreen is showing up - instead i see a bluescreen. The mobile is not stuck, it boots into the system (I get text and stuff) but I can't see a thing.
I don't have USB debugging turned on nor is it possible to boot into recovery (holding down Vol-Down never worked - I always start recovery from within the app).
Help would be appreciated
i posted your fix on nightlies discussion page check there
i got the same error
i had try Pac-Rom and aokp nightly both result on a blue screen after boot
I currently running aokp_p930_milestone-6 HONO
Lg Optimus Lte Bell
Related
Hello,
I have been slowly getting my OUYA rooted and with CWM Recovery over the last few day. I was successful tonight using the information on here, but I now have a problem I have gotten CM11 nightly installed but it gives me the loading logo and then goes blank.
Can someone offer some help and also if / how do i get back into Recovery mode?
Thanks
Q&A for [ROM][4.4.4][Official] CyanogenMod 11.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.4][Official] CyanogenMod 11.0. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Please help!
Please Help-
I have a HTC ONE M7 from Verizon that is rooted and running CM11 snapshot M10. I recently started using the phone after a couple of months. When I started using the phone it was still on CM10.2, working fine. I upgraded to CM11 and had an issue with google play services failing, so I wiped the device and did a fresh install of CM11. The install worked fine and but I had none of my previous apps so I began the process of setting my phone back up and downloading all of my apps. Certain apps would not install and come up with an error message. ( Unknown error code during application install "-24". So I did some research and found out how to get rid of the error code but it only worked for certain apps, others still came up with the same message. I had wanted to clean out my phones memory anyways because it was getting full so I decided to do a full factory data wipe/reset from the phones settings menu, not from recovery. So I proceeded to wipe the phone and it rebooted and showed the android logo with the crazy blue lines in his stomach and the blue loading bar below. I let the phone sit for a while and nothing was happening. It stayed on that screen for a couple of hours without rebooting or showing any signs that it was wiping the device. So I decided to to hard reboot the device with the power and volume down button ( probably a bad idea I know) and reboot the device. Now when I power on the device the CM logo shows up but it just keeps spinning, never boots into the device. If I try to boot into recovery, the bootloader shows up fine, and then I select recovery and it goes back to the same screen with the android logo and cray blue lines in his stomach and loading bar below. I have let the device sit for hours both trying to boot up or boot into recovery and it just either stays on the CM loading screen or the android logo with blue loading bar. I now do not know what to do and am a little worried. I am not new to rooting and roming android devices but I am also not a pro. Please help me recover my device to any rom.
Thank you for your help and sorry for the long post.
manklee said:
Please Help-
I have a HTC ONE M7 from Verizon that is rooted and running CM11 snapshot M10. I recently started using the phone after a couple of months. When I started using the phone it was still on CM10.2, working fine. I upgraded to CM11 and had an issue with google play services failing, so I wiped the device and did a fresh install of CM11. The install worked fine and but I had none of my previous apps so I began the process of setting my phone back up and downloading all of my apps. Certain apps would not install and come up with an error message. ( Unknown error code during application install "-24". So I did some research and found out how to get rid of the error code but it only worked for certain apps, others still came up with the same message. I had wanted to clean out my phones memory anyways because it was getting full so I decided to do a full factory data wipe/reset from the phones settings menu, not from recovery. So I proceeded to wipe the phone and it rebooted and showed the android logo with the crazy blue lines in his stomach and the blue loading bar below. I let the phone sit for a while and nothing was happening. It stayed on that screen for a couple of hours without rebooting or showing any signs that it was wiping the device. So I decided to to hard reboot the device with the power and volume down button ( probably a bad idea I know) and reboot the device. Now when I power on the device the CM logo shows up but it just keeps spinning, never boots into the device. If I try to boot into recovery, the bootloader shows up fine, and then I select recovery and it goes back to the same screen with the android logo and cray blue lines in his stomach and loading bar below. I have let the device sit for hours both trying to boot up or boot into recovery and it just either stays on the CM loading screen or the android logo with blue loading bar. I now do not know what to do and am a little worried. I am not new to rooting and roming android devices but I am also not a pro. Please help me recover my device to any rom.
Thank you for your help and sorry for the long post.
Click to expand...
Click to collapse
Are you s-off? You'll find it in your HBOOT
Help
I've upgraded my phone yesterday by CM 11.0 but i cant make a phone call or even draft a massage. It said Molbie network not available
hectorvo said:
I've upgraded my phone yesterday by CM 11.0 but i cant make a phone call or even draft a massage. It said Molbie network not available
Click to expand...
Click to collapse
You probably need to update your firmware to use the newer cm. Make sure you flash the latest with no boot.img.
Hi all,
I just rooted my G Pad on 4.2.2 and installed CWM 6.0.5.1, and then flashed the latest CM12 from their website. Now I'm stuck on the blue android loading screen. I've tried to get back into recovery, but I can't seem to boot into it with the key presses. It will show me the factory reset screen and then just tries to restart again. Any ideas on how to proceed from here?
EDIT: Was able to get into download mode and reflash stock 4.2. nothing to see here
Hi everyone, new member. Recently my g3 got in a bootloop so i hard reset it. Everything seemed to work fine but after a short time the device used to get stuck and restart. I followed a guide how to revert back everything to stock but something went wrong and the device got stuck on MiniOS and then Reset Status 2.
i tried to fix it by flashing it with .kdz file but for some reason now when i turn it on it says: Secure booting error and the screen turns black and the led starts flashing red and blue.
I cannot access download mode cause it goes straight to the lg logo and black screen but u can access recovery mode. i already tried a hard reset but its no use as the device gets back to the black screen.
Any help would be immensely appreciated as this is my second g3 in 4 months and im tempted to throw it away.
Thanks and good day
Post your device model variant (D850, D851, D852, etc.). Also check out these two threads...
[Q] Bricked LS990 - Can't access recovery or download mode ...Specifically post #16
http://forum.xda-developers.com/sprint-lg-g3/help/bricked-ls990-access-recovery-download-t3053985
[q] lg g3 d855 hard bricked no download mode or recovery!
http://forum.xda-developers.com/lg-g3/help/q-lg-g3-d855-hard-bricked-download-mode-t3090911
Hi guys. I have a factory refurbished AT&T E980 that had stock 4.2.2 on it when I got it. Assuming it was the last OTA that was pushed out. I attempted to downgrade to 10g because I was still learning the recovery options for this phone. I've since flashed most of the available JB builds with similiar results. From off, the phone will show the AT&T logo for a few seconds, then go to a black screen for several seconds. Then I have to hit the power button twice to bring up the home screen. There is no boot animation, but you can hear the accompanying sound. I seemingly cannot get any roms to boot, other than stock, as they all hang at a black screen, even after wiping/factory reset. I also cannot get any variants of recoveries to work, other than the CWM packaged with GPro Recovery. The TWRP included with that only shows a black screen with the back and menu buttons lit up, and the home button cycling through colors.
I've searched through the forums and haven't seen anyone experiencing this issue. My only clue to the problem is reading something about another LG phone that, once refurbished, came with updated display drivers that caused a similar issue. Here.
Any insight would be appreciated.
*Edit
I flashed SphinX Pro v2.0 after posting this. It corrected the above issues, and allowed me to boot into the included philz recovery with no problems. I then tried to use philz to flash the Cloudy TWRP in preparation for installing Super Mini V6.5 but was unsuccessful. What I assume is supposed to be recovery is now a black screen. The bootanimation is gone, but I no longer have to cycle the power button to show the home screen once it boots all the way up.