Ouya CM11 black screen on boot - Ouya Q&A, Help & Troubleshooting

Hello,
I have been slowly getting my OUYA rooted and with CWM Recovery over the last few day. I was successful tonight using the information on here, but I now have a problem I have gotten CM11 nightly installed but it gives me the loading logo and then goes blank.
Can someone offer some help and also if / how do i get back into Recovery mode?
Thanks

Related

[Q&A] [ROM][4.4.4][Official] CyanogenMod 11.0

Q&A for [ROM][4.4.4][Official] CyanogenMod 11.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.4][Official] CyanogenMod 11.0. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Please help!
Please Help-
I have a HTC ONE M7 from Verizon that is rooted and running CM11 snapshot M10. I recently started using the phone after a couple of months. When I started using the phone it was still on CM10.2, working fine. I upgraded to CM11 and had an issue with google play services failing, so I wiped the device and did a fresh install of CM11. The install worked fine and but I had none of my previous apps so I began the process of setting my phone back up and downloading all of my apps. Certain apps would not install and come up with an error message. ( Unknown error code during application install "-24". So I did some research and found out how to get rid of the error code but it only worked for certain apps, others still came up with the same message. I had wanted to clean out my phones memory anyways because it was getting full so I decided to do a full factory data wipe/reset from the phones settings menu, not from recovery. So I proceeded to wipe the phone and it rebooted and showed the android logo with the crazy blue lines in his stomach and the blue loading bar below. I let the phone sit for a while and nothing was happening. It stayed on that screen for a couple of hours without rebooting or showing any signs that it was wiping the device. So I decided to to hard reboot the device with the power and volume down button ( probably a bad idea I know) and reboot the device. Now when I power on the device the CM logo shows up but it just keeps spinning, never boots into the device. If I try to boot into recovery, the bootloader shows up fine, and then I select recovery and it goes back to the same screen with the android logo and cray blue lines in his stomach and loading bar below. I have let the device sit for hours both trying to boot up or boot into recovery and it just either stays on the CM loading screen or the android logo with blue loading bar. I now do not know what to do and am a little worried. I am not new to rooting and roming android devices but I am also not a pro. Please help me recover my device to any rom.
Thank you for your help and sorry for the long post.
manklee said:
Please Help-
I have a HTC ONE M7 from Verizon that is rooted and running CM11 snapshot M10. I recently started using the phone after a couple of months. When I started using the phone it was still on CM10.2, working fine. I upgraded to CM11 and had an issue with google play services failing, so I wiped the device and did a fresh install of CM11. The install worked fine and but I had none of my previous apps so I began the process of setting my phone back up and downloading all of my apps. Certain apps would not install and come up with an error message. ( Unknown error code during application install "-24". So I did some research and found out how to get rid of the error code but it only worked for certain apps, others still came up with the same message. I had wanted to clean out my phones memory anyways because it was getting full so I decided to do a full factory data wipe/reset from the phones settings menu, not from recovery. So I proceeded to wipe the phone and it rebooted and showed the android logo with the crazy blue lines in his stomach and the blue loading bar below. I let the phone sit for a while and nothing was happening. It stayed on that screen for a couple of hours without rebooting or showing any signs that it was wiping the device. So I decided to to hard reboot the device with the power and volume down button ( probably a bad idea I know) and reboot the device. Now when I power on the device the CM logo shows up but it just keeps spinning, never boots into the device. If I try to boot into recovery, the bootloader shows up fine, and then I select recovery and it goes back to the same screen with the android logo and cray blue lines in his stomach and loading bar below. I have let the device sit for hours both trying to boot up or boot into recovery and it just either stays on the CM loading screen or the android logo with blue loading bar. I now do not know what to do and am a little worried. I am not new to rooting and roming android devices but I am also not a pro. Please help me recover my device to any rom.
Thank you for your help and sorry for the long post.
Click to expand...
Click to collapse
Are you s-off? You'll find it in your HBOOT
Help
I've upgraded my phone yesterday by CM 11.0 but i cant make a phone call or even draft a massage. It said Molbie network not available
hectorvo said:
I've upgraded my phone yesterday by CM 11.0 but i cant make a phone call or even draft a massage. It said Molbie network not available
Click to expand...
Click to collapse
You probably need to update your firmware to use the newer cm. Make sure you flash the latest with no boot.img.

Stuck on CM restart screen

Hi all,
I just rooted my G Pad on 4.2.2 and installed CWM 6.0.5.1, and then flashed the latest CM12 from their website. Now I'm stuck on the blue android loading screen. I've tried to get back into recovery, but I can't seem to boot into it with the key presses. It will show me the factory reset screen and then just tries to restart again. Any ideas on how to proceed from here?
EDIT: Was able to get into download mode and reflash stock 4.2. nothing to see here

[Q] HELP: KF HD 7 (tate) - Recovery loop after CM12.1 install

OOOOPS - Wrong forum please disregard
Hi...
I got a Kindle fire HD 7 - tate. I had CM11 (kitkat) running for quite a while now nicely.
Today I decided to upgrade it to CM12.1 - Maybe a fault.
First I flashed TWRP 2.8.3 (previously I had 2.7.0) from xda here. Ok so far. Just it brings some
gibberish on top of the orange "kindle fire" text on boot. But otherwise it seems to work.
I installed CM12.1 nightly from today. Before I did a full wipe in TWRP. Ok so far. It bootet up nicely
in CM. Now I flashed the gapps and rebootet. Ok so far. Everything seemed to work.
But now I maybe made a deadly mistake. I decided to do a factory reset in CM12.1.
(I wanted to make a really fresh and clean install with also running googles first boot wizard).
My KFHD7 shutted down and rebootet. But since now It is stuck in some kind of a loop.
The blue TWRP boot splash appears. Every 2 seconds the screen turns black for a second
then the blue TWRP boot splash comes back and this happens now again and again.
I turned off my tablet by a long press on the power button a couple of times, but it does not help.
Any idea how I can revive my tablet?
Thanks for all your help!
OMG, this exact thing just happened to me tonight. I was trying to wipe the ROM clean to sell the Kindle from within CM12.1. After it rebooted automatically, I went into a teamwin loop blanking every few seconds with a pattern. Just posted a question over on Reddit. I haven't found an answer yet, but upgrading from twrp 2.7.0.0 to 2.8.7.0 changed the repeated teamwin loop into a orange kindle fire loop. With nothing to lose, I'm just going to keep loading stuff via fastboot until something else changes.

GT-I9190 stuck on TWRP Slash Screen and Unable to re-install

Hello guys,
Thank you for reading, any help is appreciated.
My device was running the latest release of CM13 (cm-13.0-20160418-SNAPSHOT-ZNH0EAO2NK-serrano3gxx) and TWRP v3.0.2-1
So yesterday afternoon my phone randomly shutdown and I was unable to get it turned back on until this morning.
However though when i did manage to get it powered on after hours of failed tries it was stuck on the Samsung boot screen.
I've since tried to access the TWRP Recovery (Pwr + Vol Up + Home) but it sticks on the TWRP slash screen and then attempts to reboot normally (which as i said stick on the Samsung boot screen).
I also tried re-installing TWRP via Odin and it appears to be installing properly and successfully but when i attempt to access TWRP it again sticks on the splash screen,
I've also tried installing CWM Record via odin and that also appears to be installing properly and successfully but when I attempt to access the recovery I am yet again greeted with the TWRP Slash Screen which has lead me to believe something is going wrong.
Any ideas or suggestions as to what may be going on here ?
Thanks in advance, any help is appreciated.
Hey again guys,
I have tried installing stock rom via Odin, It says Pass but nothing at all seems to be changing.
I'm beginning to think Odin may really not be working at all or something is wrong with the phone
Update: I tried flashing TWRP recovery via Heimdall and it appears to have completed successfully saying "RECOVERY upload successful" but when i reboot immediately after into Recovery mode it still sticks at the TWRP 3.0.0-0 Splash Screen then attempts to reboot normally which as mentioned earlier also sticks on samsung slash screen

tab s 8.4 wifi stuck in TWRP boot loop

I was an idiot and did a factory reset (not while in recovery mode) and when everything restarted I ended up with my tablet stuck trying to load TWRP - I am/was running the lastest CM nightly from the end of May, I don't know what version of TWRP is currently on there. I just get the blue teamwin screen that stays there for about 5 seconds, flashes black, then back to the teamwin screen again. I got it into download mode one time, but as I was not in a situation where I could take advantage, and have since forgotten what I did to get it into download mode. (I think) I've tried all the button combinations with the tablet in the bootloop, and with it off (dead battery) to no avail. I've checked the forums and the few that I've found with the same situation as me, there is either no solution offered, or the solution was never posted, just that the situation was resolved - the thread most resembling my situation is this one http://forum.xda-developers.com/galaxy-tab-s/help/galaxy-tab-s-sm-800-stuck-flashing-twrp-t3219865.
Any help would be greatly appreciated. If you need more information, let me know. Thanks!

Categories

Resources