[Q] How to install eXistenZ on Xperia S - Sony Xperia S, Acro S, Ion

I am using XZXperience 2 now.
How can I install the new ROM which is eXistenZ?
PHONE: Xperia S
ROM: XZXperience 2
KERNEL: Advanced Stock ICS Kernel Build 17

quezacotl0215 said:
I am using XZXperience 2 now.
How can I install the new ROM which is eXistenZ?
PHONE: Xperia S
ROM: XZXperience 2
KERNEL: Advanced Stock ICS Kernel Build 17
Click to expand...
Click to collapse
Here - http://forum.xda-developers.com/showpost.php?p=41112517&postcount=2
Please search and read the OP carefully before posting next time.
Regards,
abcdjdj

abcdjdj said:
Here - http://forum.xda-developers.com/showpost.php?p=41112517&postcount=2
Please search and read the OP carefully before posting next time.
Regards,
abcdjdj
Click to expand...
Click to collapse
Thanks!
I read it, but I am not sure that is XZX2 a .55 or .50 firmware
becuase in http://forum.xda-developers.com/showthread.php?t=2137561
he shows it is a stock 6.1.A.2.55 rom with the feeling of JellyBean.
However, in the end of his post, he shows the instruction for lock bootloader is flash official 6.1.A.2.50 with flashtool.
Anyway, I tried to flash eXistenZ from XZX2, but it shows ERROR.....

quezacotl0215 said:
Thanks!
I read it, but I am not sure that is XZX2 a .55 or .50 firmware
becuase in http://forum.xda-developers.com/showthread.php?t=2137561
he shows it is a stock 6.1.A.2.55 rom with the feeling of JellyBean.
However, in the end of his post, he shows the instruction for lock bootloader is flash official 6.1.A.2.50 with flashtool.
Anyway, I tried to flash eXistenZ from XZX2, but it shows ERROR.....
Click to expand...
Click to collapse
XZX is .55. Just flash the zip of leak JB over it in CWM.

davidbar93 said:
XZX is .55. Just flash the zip of leak JB over it in CWM.
Click to expand...
Click to collapse
No he can't because he will get status 7. He will first have to flash the kernel of eXiztenz rom and then flash the rom.
Sent from my LT26i using xda app-developers app

Its already posted on the OP of the Existenz thread

[ROM][S][JB][LB,UB] eXistenZ Ultra 2.0.5 | Honami Camera & more |
There are have 2 versions of roms under the download category...so how to install these 2 roms... i mean there are have two downloads eXistenZ Ultra v1.0.0 and eXistenZ Ultra v2.0.5 OTA...
http://forum.xda-developers.com/showthread.php?t=2476341
Plz rply me soon...

[email protected] said:
There are have 2 versions of roms under the download category...so how to install these 2 roms... i mean there are have two downloads eXistenZ Ultra v1.0.0 and eXistenZ Ultra v2.0.5 OTA...
http://forum.xda-developers.com/showthread.php?t=2476341
Plz rply me soon...
Click to expand...
Click to collapse
help me plzz

[email protected] said:
help me plzz
Click to expand...
Click to collapse
anyone help me plzz.....i want to know about that.........

[email protected] said:
anyone help me plzz.....i want to know about that.........
Click to expand...
Click to collapse
Install v1 first. v1.3.5 and v2.0.5 are updates to the ROM, not the entire ROM.
So install V1.
Then Flash V1.3.5
Then Flash v2.0.5
Edit: V1.3.5 link is not available in the ROM section. You will get that as OTA update when You flash v1 and connect to WiFi.

Mirhawk said:
Install v1 first. v1.3.5 and v2.0.5 are updates to the ROM, not the entire ROM.
So install V1.
Then Flash V1.3.5
Then Flash v2.0.5
Edit: V1.3.5 link is not available in the ROM section. You will get that as OTA update when You flash v1 and connect to WiFi.
Click to expand...
Click to collapse
How to install V1 ???
How to update V1.3.5 after V1..
What is OTA update??
Thanx 4 previous...
plz help me again..
---------- Post added at 03:39 AM ---------- Previous post was at 03:33 AM ----------
[email protected] said:
How to install V1 ???
How to update V1.3.5 after V1..
What is OTA update??
Thanx 4 previous...
plz help me again..
Click to expand...
Click to collapse
And also tell me how to flash V2 after v1.3.5

[email protected] said:
How to install V1 ???
How to update V1.3.5 after V1..
What is OTA update??
Thanx 4 previous...
plz help me again..
---------- Post added at 03:39 AM ---------- Previous post was at 03:33 AM ----------
And also tell me how to flash V2 after v1.3.5
Click to expand...
Click to collapse
Did You try the installation instructions specified by the developer? What ROM are You on currently?

Mirhawk said:
Did You try the installation instructions specified by the developer? What ROM are You on currently?
Click to expand...
Click to collapse
stil my rom is sony official rom...i'll hope to install this rom..
i know how to root,and other things.. but i want to know how to install these v1 , v1.3.5 and V2
And also want to know fixing the camera problem..
So help me soon...
thank u...

[email protected] said:
stil my rom is sony official rom...i'll hope to install this rom..
i know how to root,and other things.. but i want to know how to install these v1 , v1.3.5 and V2
And also want to know fixing the camera problem..
So help me soon...
thank u...
Click to expand...
Click to collapse
So I will consider that You are rooted and are on Sony Stock Jelly Bean 6.2.B.1.96 and have a cwm installed.
Download the v1 file and Copy it to Your Phone. Boot into the cwm, wipe Data, Cache and Dalvik Cache. Remember, don't wipe sdcard!! Install the zip. Boot the device. Enter all Your data and let it settle a bit. Don't yet install Your apps or restore Your data.
You can check the camera now. Only the superior mode doesn't mode doesn't work in this ROM, rest all modes of Camera work, and believe Me when I say, You can take great pics on manual mode too. Even if then You don't like the camera, You can flash the stock camera via cwm, no other things are needed to be done. Then when You are connected to wifi, You get a notification that You have an update for the ROM. Let it download. It won't show any progress bar while downloading, it just displays that Your update is being downloaded, so don't freak out when You don't see anything progress. Then after download is complete (52.1 MB), again reboot into cwm and install the zip in /sdcard/OTA-Updater/download and clear cache and dalvik. Don't clear data now. Then again boot and let it settle. You can either download v2.0.5 from OTA or directly download from website and then flash it via cwm and again clean dalvik and cache. Done.

Mirhawk said:
So I will consider that You are rooted and are on Sony Stock Jelly Bean 6.2.B.1.96 and have a cwm installed.
Download the v1 file and Copy it to Your Phone. Boot into the cwm, wipe Data, Cache and Dalvik Cache. Remember, don't wipe sdcard!! Install the zip. Boot the device. Enter all Your data and let it settle a bit. Don't yet install Your apps or restore Your data.
You can check the camera now. Only the superior mode doesn't mode doesn't work in this ROM, rest all modes of Camera work, and believe Me when I say, You can take great pics on manual mode too. Even if then You don't like the camera, You can flash the stock camera via cwm, no other things are needed to be done. Then when You are connected to wifi, You get a notification that You have an update for the ROM. Let it download. It won't show any progress bar while downloading, it just displays that Your update is being downloaded, so don't freak out when You don't see anything progress. Then after download is complete (52.1 MB), again reboot into cwm and install the zip in /sdcard/OTA-Updater/download and clear cache and dalvik. Don't clear data now. Then again boot and let it settle. You can either download v2.0.5 from OTA or directly download from website and then flash it via cwm and again clean dalvik and cache. Done.
Click to expand...
Click to collapse
Million thnx for your help Mirhawk....
If i have a doubt when doing this i will tell u
thnx again..

Mirhawk said:
So I will consider that You are rooted and are on Sony Stock Jelly Bean 6.2.B.1.96 and have a cwm installed.
Download the v1 file and Copy it to Your Phone. Boot into the cwm, wipe Data, Cache and Dalvik Cache. Remember, don't wipe sdcard!! Install the zip. Boot the device. Enter all Your data and let it settle a bit. Don't yet install Your apps or restore Your data.
You can check the camera now. Only the superior mode doesn't mode doesn't work in this ROM, rest all modes of Camera work, and believe Me when I say, You can take great pics on manual mode too. Even if then You don't like the camera, You can flash the stock camera via cwm, no other things are needed to be done. Then when You are connected to wifi, You get a notification that You have an update for the ROM. Let it download. It won't show any progress bar while downloading, it just displays that Your update is being downloaded, so don't freak out when You don't see anything progress. Then after download is complete (52.1 MB), again reboot into cwm and install the zip in /sdcard/OTA-Updater/download and clear cache and dalvik. Don't clear data now. Then again boot and let it settle. You can either download v2.0.5 from OTA or directly download from website and then flash it via cwm and again clean dalvik and cache. Done.
Click to expand...
Click to collapse
I want to know how to install the zip as u said above...
How to flash the stock camera using cwm??
Also how to do that.. "again reboot into cwm and install the zip in /sdcard/OTA-Updater/download and clear cache and dalvik"
Plz help me soon...

[email protected] said:
I want to know how to install the zip as u said above...
How to flash the stock camera using cwm??
Also how to do that.. "again reboot into cwm and install the zip in /sdcard/OTA-Updater/download and clear cache and dalvik"
Plz help me soon...
Click to expand...
Click to collapse
Okay, so first tell Me do You know how to use CWM? Like how to boot into CWM and wipe cache and all?

Mirhawk said:
Okay, so first tell Me do You know how to use CWM? Like how to boot into CWM and wipe cache and all?
Click to expand...
Click to collapse
Little bit i knw about that by watching videos...But i have no clear idea about how to use CWM...

[email protected] said:
Little bit i knw about that by watching videos...But i have no clear idea about how to use CWM...
Click to expand...
Click to collapse
Okay, I would recommend You read more about CWM. Here is a link about it: CWM TUT
Then follow the following instructions:
1. Download the ROM. It should be a zip file.
2. Copy the downloaded ROM to the storage card.
3. Take backup of all Your apps, contacts and sms. Nothing will happen to Your internal memory data(music, photos etc). Still I recommend You backup it as You are new to this.
4. Power your phone off and reboot it into recovery. To do this, power on the phone and keep on pressing volume up key. If the led is blue, you have entered the CWM. Once in recovery, you can navigate its menu using the volume up and volume down hardware keys and to select the option You have to press power key. You are now on the main recovery menu. It will look something like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Select the option ‘wipe data/factory reset’. You will be prompted to confirm this action. Select “Yes – Delete all user data”. This will delete only Your apps and the data stored by apps, it will not delete anything from Your internal memory.
6. From the main recovery menu, select ‘wipe cache partition’. You will be prompted to confirm this action. Select ‘Yes – Wipe Cache’.
7. From the main recovery menu, enter the ‘advanced’ menu. From this menu, select ‘Wipe Dalvik Cache’. You will be prompted to confirm this action. Select ‘Yes – Wipe Dalvik Cache’.
8. Go back to the main recovery menu by selecting the back button and select the ‘Install zip from SD card’ option.
9. Select ‘choose zip from sdcard’ to get a list of the files and folders on your SD card. Scroll to the ROM’s file that you copied there in step 2, and select it. You will be prompted to confirm this action. Select ‘Yes – Install file_name.zip’ where file_name.zip is the name of the zip file that you are trying to install. The process will be like this:
10. Wait patiently while the ROM is flashed to your phone via recovery.
11. Once the installation is complete, head back to the main recovery menu if you aren’t there, and select ‘reboot system now’. Your phone will now boot into the newly installed ROM.
Do this first, will tell the rest then.

Mirhawk said:
Okay, I would recommend You read more about CWM. Here is a link about it: CWM TUT
Then follow the following instructions:
1. Download the ROM. It should be a zip file.
2. Copy the downloaded ROM to the storage card.
3. Take backup of all Your apps, contacts and sms. Nothing will happen to Your internal memory data(music, photos etc). Still I recommend You backup it as You are new to this.
4. Power your phone off and reboot it into recovery. To do this, power on the phone and keep on pressing volume up key. If the led is blue, you have entered the CWM. Once in recovery, you can navigate its menu using the volume up and volume down hardware keys and to select the option You have to press power key. You are now on the main recovery menu. It will look something like this:
5. Select the option ‘wipe data/factory reset’. You will be prompted to confirm this action. Select “Yes – Delete all user data”. This will delete only Your apps and the data stored by apps, it will not delete anything from Your internal memory.
6. From the main recovery menu, select ‘wipe cache partition’. You will be prompted to confirm this action. Select ‘Yes – Wipe Cache’.
7. From the main recovery menu, enter the ‘advanced’ menu. From this menu, select ‘Wipe Dalvik Cache’. You will be prompted to confirm this action. Select ‘Yes – Wipe Dalvik Cache’.
8. Go back to the main recovery menu by selecting the back button and select the ‘Install zip from SD card’ option.
9. Select ‘choose zip from sdcard’ to get a list of the files and folders on your SD card. Scroll to the ROM’s file that you copied there in step 2, and select it. You will be prompted to confirm this action. Select ‘Yes – Install file_name.zip’ where file_name.zip is the name of the zip file that you are trying to install. The process will be like this:
10. Wait patiently while the ROM is flashed to your phone via recovery.
11. Once the installation is complete, head back to the main recovery menu if you aren’t there, and select ‘reboot system now’. Your phone will now boot into the newly installed ROM.
Do this first, will tell the rest then.
Click to expand...
Click to collapse
Thnx friend...
Before this, do we want backup the old rom??? How??
---------- Post added at 03:56 AM ---------- Previous post was at 03:50 AM ----------
Mirhawk said:
Okay, I would recommend You read more about CWM. Here is a link about it: CWM TUT
Then follow the following instructions:
1. Download the ROM. It should be a zip file.
2. Copy the downloaded ROM to the storage card.
3. Take backup of all Your apps, contacts and sms. Nothing will happen to Your internal memory data(music, photos etc). Still I recommend You backup it as You are new to this.
4. Power your phone off and reboot it into recovery. To do this, power on the phone and keep on pressing volume up key. If the led is blue, you have entered the CWM. Once in recovery, you can navigate its menu using the volume up and volume down hardware keys and to select the option You have to press power key. You are now on the main recovery menu. It will look something like this:
5. Select the option ‘wipe data/factory reset’. You will be prompted to confirm this action. Select “Yes – Delete all user data”. This will delete only Your apps and the data stored by apps, it will not delete anything from Your internal memory.
6. From the main recovery menu, select ‘wipe cache partition’. You will be prompted to confirm this action. Select ‘Yes – Wipe Cache’.
7. From the main recovery menu, enter the ‘advanced’ menu. From this menu, select ‘Wipe Dalvik Cache’. You will be prompted to confirm this action. Select ‘Yes – Wipe Dalvik Cache’.
8. Go back to the main recovery menu by selecting the back button and select the ‘Install zip from SD card’ option.
9. Select ‘choose zip from sdcard’ to get a list of the files and folders on your SD card. Scroll to the ROM’s file that you copied there in step 2, and select it. You will be prompted to confirm this action. Select ‘Yes – Install file_name.zip’ where file_name.zip is the name of the zip file that you are trying to install. The process will be like this:
10. Wait patiently while the ROM is flashed to your phone via recovery.
11. Once the installation is complete, head back to the main recovery menu if you aren’t there, and select ‘reboot system now’. Your phone will now boot into the newly installed ROM.
Do this first, will tell the rest then.
Click to expand...
Click to collapse
Thnx friend...
Which software used to backup my phone apps???
Before installing the zip, do we want backup the old rom??? How??

Related

I want to put on AOKP on my Nexus..

Is there more n00b friendly instructions than this to install AOKP? Sorry I am a former Blackberry owner, I am a little nervous but I am tech savvy. I just don't want to brick my phone..
My phone is rooted.. I have the latest AOKP and gapps from the AOKP site.
1. Make sure you're on the latest CWM
2. MAKE A NANDROID
3. wipe data/factory reset in recovery
4. flash ROM
5. flash Gapps
6. reboot
=
1. I have the latest ROM manager.
2. No idea what or how to use it... (I did a full backup with Galaxy Nexus Root Toolkit, good enough?)
3. Is this done in the ROM manager, I think so, or when I am in bootloader mode maybe?
4. Flashing it I assume with ROM manager, pick the zip and voila..
5. No idea about this one. With ROM manager too?
6. Dah.. I think I can handle this step..
Appreciate any help.. remember n00b, never had an android and never did anything with my BB. N00b. Thanks!
Since you are already rooted.... I'll keep it simple. You can backup your ROM in ROM manager.
Boot to CWM
Wipe data (wipes cache too)
Go to advanced, wipe Dalvik
Flash AOKP
Flash GAPPS
Reboot
Flash kernel if you are using a modified one. If you flash a kernel after you boot, just wipe dalvik.
Flukester69 said:
Is there more n00b friendly instructions than this to install AOKP? Sorry I am a former Blackberry owner, I am a little nervous but I am tech savvy. I just don't want to brick my phone..
My phone is rooted.. I have the latest AOKP and gapps from the AOKP site.
1. Make sure you're on the latest CWM
2. MAKE A NANDROID
3. wipe data/factory reset in recovery
4. flash ROM
5. flash Gapps
6. reboot
=
1. I have the latest ROM manager.
2. No idea what or how to use it... (I did a full backup with Galaxy Nexus Root Toolkit, good enough?)
3. Is this done in the ROM manager, I think so, or when I am in bootloader mode maybe?
4. Flashing it I assume with ROM manager, pick the zip and voila..
5. No idea about this one. With ROM manager too?
6. Dah.. I think I can handle this step..
Appreciate any help.. remember n00b, never had an android and never did anything with my BB. N00b. Thanks!
Click to expand...
Click to collapse
You don't have to flash through "Rom Manager" its much easier in ClockworkMod Recovery (assuming you have it installed, check at the top of Rom Manger to see if you have the latest recovery). To get there, you just have to hold down "Power + Volume Up + Volume Down," when you're there, you can move up and down with your volume up/down buttons and press "enter" with the power button. From there you can create a backup (backup and restore --> backup), wipe data/cache/dalvik (wipe data/factory reset), and flash your Rom/Gapps (install zip from sdcard --> choose zip from sdcard --> download --> find your rom/gapps). You should reboot after that, and it'll be set.
Ok that's cool..
few questions.. boot to CWM is that the recovery manager on my phone? or Do you mean select in ROM manager "Flash ClockworkMod Recovery"
Go to advanced, wipe Dalvik, I expect that is an option when phone is booted. I don't see that in ROM manager.
Flash Kernel? Now I'm kinda confused. I thought AOKP has the kernel, am I using a modified one? Uh, I just unlocked and rooted this with GNR Toolkit nothing else.
Another question I am curious in ROM manager, where do these rom backups go? Should I not put those on my pc hd somewhere safe?
Flukester69 said:
Ok that's cool..
few questions.. boot to CWM is that the recovery manager on my phone? or Do you mean select in ROM manager "Flash ClockworkMod Recovery"
Go to advanced, wipe Dalvik, I expect that is an option when phone is booted. I don't see that in ROM manager.
Flash Kernel? Now I'm kinda confused. I thought AOKP has the kernel, am I using a modified one? Uh, I just unlocked and rooted this with GNR Toolkit nothing else.
Another question I am curious in ROM manager, where do these rom backups go? Should I not put those on my pc hd somewhere safe?
Click to expand...
Click to collapse
You must have flashed ClockwordMod Recovery already... at the top in the Rom Manager application where it says Flash ClockwordMod Recovery, it should have something saying "Current Recovery: 5.5.0.4" and "Latest Recovery 5.5.0.4." Make sure your current and latest match up. If they do, then you already have CWM installed. Then you can boot into it from the instructions I provided in my post above (turn off phone, hold down power + volume up + volume down).
AOKP has a kernel, you can choose to download and flash a separate kernel if you want.
The rom backups go to your virtual SD card, and will not get wiped when you do a data wipe, so they are secure (i.e. you don't have to put them on your computer if you don't want to).
anton that makes sense mostly but..
"and flash your Rom/Gapps (install zip from sdcard --> choose zip from sdcard --> download --> find your rom/gapps). You should reboot after that, and it'll be set."
If I
"From there you can create a backup (backup and restore --> backup), wipe data/cache/dalvik (wipe data/factory reset)"
Wouldn't that mean there would be nothing on the SD card to flash with?
Flukester69 said:
anton that makes sense mostly but..
"and flash your Rom/Gapps (install zip from sdcard --> choose zip from sdcard --> download --> find your rom/gapps). You should reboot after that, and it'll be set."
If I
"From there you can create a backup (backup and restore --> backup), wipe data/cache/dalvik (wipe data/factory reset)"
Wouldn't that mean there would be nothing on the SD card to flash with?
Click to expand...
Click to collapse
No. Wiping data/cache/dalvik does not touch SD Card contents.
Flukester69 said:
Ok that's cool..
few questions.. boot to CWM is that the recovery manager on my phone? or Do you mean select in ROM manager "Flash ClockworkMod Recovery"
Go to advanced, wipe Dalvik, I expect that is an option when phone is booted. I don't see that in ROM manager.
Flash Kernel? Now I'm kinda confused. I thought AOKP has the kernel, am I using a modified one? Uh, I just unlocked and rooted this with GNR Toolkit nothing else.
Another question I am curious in ROM manager, where do these rom backups go? Should I not put those on my pc hd somewhere safe?
Click to expand...
Click to collapse
Yes, CWM is the recovery. Flashing CWM only flashes it to your phone, you still have to boot into it.
Don't wipe or anything from Rom Manger, that's an option that I don't recommend. From Rom Manager you can boot to CWM, do that and do the above I posted. You should be fine.
Just remember, do a factory reset, wipe dalvik, flash new ROM, then flash GAPPS. After that you are good. First boot will take some time.
You need to format /system too. It's under Mounts and storage.
Flukester69 said:
Is there more n00b friendly instructions than this to install AOKP? Sorry I am a former Blackberry owner, I am a little nervous but I am tech savvy. I just don't want to brick my phone..
My phone is rooted.. I have the latest AOKP and gapps from the AOKP site.
1. Make sure you're on the latest CWM
2. MAKE A NANDROID
3. wipe data/factory reset in recovery
4. flash ROM
5. flash Gapps
6. reboot
=
1. I have the latest ROM manager.
2. No idea what or how to use it... (I did a full backup with Galaxy Nexus Root Toolkit, good enough?)
3. Is this done in the ROM manager, I think so, or when I am in bootloader mode maybe?
4. Flashing it I assume with ROM manager, pick the zip and voila..
5. No idea about this one. With ROM manager too?
6. Dah.. I think I can handle this step..
Appreciate any help.. remember n00b, never had an android and never did anything with my BB. N00b. Thanks!
Click to expand...
Click to collapse
Ok this is what you need to do.
Step 1: Open ROM Manager and install CMR (first option). You need to make sure you select the correct version of your phone (verizon is CMDA all others are GSM, I think). After it is finished installing proceed to step 2.
Step 2: In ROM Manager select "Reboot into Recovery". It will reboot and you will see the Google splash screen then a black page with blue text. If you see this proceed to step 3.
Step 3: use the volume keys to navigate to the option "Backup and Restore". When you have highlighted this option use the power button to select it. You will then a select "backup". Let it do its thing (will take a few minuets). When its done it will return you to the first screen then continue to step 4.
Step 4: Select "wipe data/factory reset". You will be taken to a screen with a bunch of "no"s and one "yes" if you are sure you want to wipe then select "yes" and let it do its thing. When its done it will return you to the main menu. Proceed to step 5.
Step 5: Select "install zip from sdcard". Select "choose zip from sdcard". Browse the ROM file. Select it and you will be at the no no no... yes screen. Select "yes" and let it do its thing. When its done you will be taken to the screen that says "choose zip from sdcard". Select that option again and browse to the gapps file. Flash it like the ROM. When you are done it will take you to the "choose zip from sdcard" screen. From there select "*****Go Back*****" then Select the first option "reboot system now". Your phone will now reboot. Note that it will take a lot longer than usual.
Also note that navigating CMR is a pia because the volume keys are jumpy.
Enjoy...
Flukester69 said:
Ok that's cool..
few questions.. boot to CWM is that the recovery manager on my phone? or Do you mean select in ROM manager "Flash ClockworkMod Recovery"
Go to advanced, wipe Dalvik, I expect that is an option when phone is booted. I don't see that in ROM manager.
Flash Kernel? Now I'm kinda confused. I thought AOKP has the kernel, am I using a modified one? Uh, I just unlocked and rooted this with GNR Toolkit nothing else.
Another question I am curious in ROM manager, where do these rom backups go? Should I not put those on my pc hd somewhere safe?
Click to expand...
Click to collapse
1. In Rom Manager, select back up and restore. This creates an exact back up of what your phone has on it and the settings.
2. In Rom Manager, select reboot in recovery. Using the volume rocker to move to wipe/data factory reset. Select option with power button. When that is complete, select install zip from sd card. Select the AOKP Rome file and flash it. Select install rom from sd card a second time and flash the Gapps (google app pack). The reboot phone.
Wiping dalvik is little redundant IMO, most custom Roms are including scripts to wipe automatically.
Since you did a factory reset (a must when changing Roms), you will need to set your phone back up.
You will leave your back up of your sd card as this is the only way you can restore via Rom Manager.
When you flash the rom, it will come with the kernel. Some prefer different kernels and will flash those as well. I have used kernels by Heyitslou since my Incredible days and flashed his V3 defiant with AOKP. It can be found on Rootzwiki.
Ok guys, many thanks. I think I got enough info.
@mentose457 I got the ROM manager installed and under CWM recovery the current and latest do match up. Do I still need to do that?
That is what I was looking for a n00b guide. Hehehe! Thanks everyone I will study those instruction and try this out.
Appreciate your help and patience guys..
mentose457 said:
Ok this is what you need to do.
Step 1: Open ROM Manager and install CMR (first option). You need to make sure you select the correct version of your phone (verizon is CMDA all others are GSM, I think). After it is finished installing proceed to step 2.
Step 2: In ROM Manager select "Reboot into Recovery". It will reboot and you will see the Google splash screen then a black page with blue text. If you see this proceed to step 3.
Step 3: use the volume keys to navigate to the option "Backup and Restore". When you have highlighted this option use the power button to select it. You will then a select "backup". Let it do its thing (will take a few minuets). When its done it will return you to the first screen then continue to step 4.
Step 4: Select "wipe data/factory reset". You will be taken to a screen with a bunch of "no"s and one "yes" if you are sure you want to wipe then select "yes" and let it do its thing. When its done it will return you to the main menu. Proceed to step 5.
Step 5: Select "install zip from sdcard". Select "choose zip from sdcard". Browse the ROM file. Select it and you will be at the no no no... yes screen. Select "yes" and let it do its thing. When its done you will be taken to the screen that says "choose zip from sdcard". Select that option again and browse to the gapps file. Flash it like the ROM. When you are done it will take you to the "choose zip from sdcard" screen. From there select "*****Go Back*****" then Select the first option "reboot system now". Your phone will now reboot. Note that it will take a lot longer than usual.
Also note that navigating CMR is a pia because the volume keys are jumpy.
Enjoy...
Click to expand...
Click to collapse
Damn, you typed faster than I did!
spence341 said:
Damn, you typed faster than I did!
Click to expand...
Click to collapse
Hahaha he did.. great help all of you. I'm 99% there in terms of confidence here.
Step 1: Open ROM Manager and install CMR (first option). You need to make sure you select the correct version of your phone (verizon is CMDA all others are GSM, I think). After it is finished installing proceed to step 2.
I don't see anything in ROM Manager that specifically says install CMR (first option). First option is Flash ClockworkMod Recovery and it has a latest and current ...5.5.0.2
When I unlocked and rooted I had installed ROM Manager etc and I see a current and latest... they are the same... blah blah blah 5.5.0.2. Do I still need to do this step?
Flukester69 said:
Step 1: Open ROM Manager and install CMR (first option). You need to make sure you select the correct version of your phone (verizon is CMDA all others are GSM, I think). After it is finished installing proceed to step 2.
When I unlocked and rooted I had installed ROM Manager etc and I see a current and latest... they are the same... blah blah blah 5.5.0.2. Do I still need to do this step?
Click to expand...
Click to collapse
No, if current and latest are the same, then you're fine and you can move on to the next step.
Errm.. I used ROM Manager I selected Backup rom, i see the android guy and see files backing up. Which turns out to be the same as your step 2 and 3. LOL! hopefully multiple backups dont hurt. LOL I'm currently finishing step 3 I guess. Next is wipe etc.
No offense to guy who did rom, but a Pink unicorn with rainbow hair.... err
No offense but generally speaking a macho guy like me hopes nobody will see a pink unicorn on his android phone. Haha!
Thanks guys, I am restoring my apps now and I think I am good. Really appreciate your help! Can't wait to try this ROM out!
Flukester69 said:
Thanks guys, I am restoring my apps now and I think I am good. Really appreciate your help! Can't wait to try this ROM out!
Click to expand...
Click to collapse
A lot of people report problems restoring Apps+Data using Titanium Backup, so I recommend only restoring the App part and not the Data part if you want to have the least amount of FCs. Unless you're restoring from market... then disregard this post. =P

[Q] How do I install a kernel?

I have my device unlocked and rooted but when I try and flash with fastboot I can see the kernel logo but then my phone turns off and starts up normally? I have seen people put the kernel in the SD card but when I do that it doesn't show up? I am also on .69 Can someone help me?
To flash a kernel;
1. open file where fastboot is;this is where the boot.img you've downloaded should be too
2. press shift+right click in window and choose 'open command window here'
3. switch off/remove battery from phone, then hold menu button whilst connecting usb. led should be blue.
4 in command window type 'fastboot flash boot boot.img, or if you've renamed the boot.img file then the new name
fastboot will show progress(normally takes under 1-2 secs),once finished disconnect, reboot
sinkster said:
To flash a kernel;
1. open file where fastboot is;this is where the boot.img you've downloaded should be too
2. press shift+right click in window and choose 'open command window here'
3. switch off/remove battery from phone, then hold menu button whilst connecting usb. led should be blue.
4 in command window type 'fastboot flash boot boot.img, or if you've renamed the boot.img file then the new name
fastboot will show progress(normally takes under 1-2 secs),once finished disconnect, reboot
Click to expand...
Click to collapse
I did all of that but it still shows me the kernel image then just reboots again normally :/
If you're getting the kernel flash screen then press down volume key repeatedly when led/button leds come on during boot. That enters cwm menu.
sinkster©
sinkster said:
If you're getting the kernel flash screen then press down volume key repeatedly when led/button leds come on during boot. That enters cwm menu.
sinkster©
Click to expand...
Click to collapse
What do I do then?
Depends on which kernel you're using. Basically, if you've used fastboot to boot the kernel correctly then when you reboot you should see the kernel flashscreen e.g. doomkernel has doomlords android in cloak, etc. If that's the case, enter cwm by repeatedly spamming(pressing) the back key or volume key once the lights come on. You'll get a menu with cwm(clockword mod recovery) options such as format phone, backup/restore, install zip, and others. If you're flashing a rom then make sure it's on your sd card, use 'install zip' and select the rom(or update) zip to flash, and confirm. If it's a different dev from the rom your current rom then also select factory reset to wipe any previous data, and advanced/wipe dalvik, to ensure a clean install. then reboot.
sinkster said:
Depends on which kernel you're using. Basically, if you've used fastboot to boot the kernel correctly then when you reboot you should see the kernel flashscreen e.g. doomkernel has doomlords android in cloak, etc. If that's the case, enter cwm by repeatedly spamming(pressing) the back key or volume key once the lights come on. You'll get a menu with cwm(clockword mod recovery) options such as format phone, backup/restore, install zip, and others. If you're flashing a rom then make sure it's on your sd card, use 'install zip' and select the rom(or update) zip to flash, and confirm. If it's a different dev from the rom your current rom then also select factory reset to wipe any previous data, and advanced/wipe dalvik, to ensure a clean install. then reboot.
Click to expand...
Click to collapse
Okay, I have done everything there. I am now waiting for it to complete.
sinkster said:
Depends on which kernel you're using. Basically, if you've used fastboot to boot the kernel correctly then when you reboot you should see the kernel flashscreen e.g. doomkernel has doomlords android in cloak, etc. If that's the case, enter cwm by repeatedly spamming(pressing) the back key or volume key once the lights come on. You'll get a menu with cwm(clockword mod recovery) options such as format phone, backup/restore, install zip, and others. If you're flashing a rom then make sure it's on your sd card, use 'install zip' and select the rom(or update) zip to flash, and confirm. If it's a different dev from the rom your current rom then also select factory reset to wipe any previous data, and advanced/wipe dalvik, to ensure a clean install. then reboot.
Click to expand...
Click to collapse
Nope still nothing, now I just got bootloop :/ I'm trying to use doomlord ICS kernel with JJ's hybrid rom?
Try flashing the rom again, in this order; wipe data/factory reset, install zip, install wifi modules, wipe dalvik cache. reboot
sinkster said:
Try flashing the rom again, in this order; wipe data/factory reset, install zip, install wifi modules, wipe dalvik cache. reboot
Click to expand...
Click to collapse
Just got bootloop again :/
Are you getting the bootscreen, think in jj's it's the new xperia boot.
sinkster said:
Are you getting the bootscreen, think in jj's it's the new xperia boot.
Click to expand...
Click to collapse
To make it easier could you provide me a good rom and kernel that go together?
If you want ics then jj's or krabappels are probably the easiest, but use the ics beta kernel. Arconium with doomkernel 21(gingerbread) is probably your best bet due to the support.
sinkster©

ICS ROMS(Includes All ICS ROMS)/MODS FOR DEFY/DEFY+

CM9/ICS Ad-Hoc fix(WORKS ONLY FOR WINDOWS USERS): http://forum.xda-developers.com/showthread.php?t=1612454
ROOTING DEFY/DEFY+: http://forum.xda-developers.com/showthread.php?t=1614651
Is your DEFY/DEFY+ bricked??(UNBRICKING DEFY/DEFY+): http://forum.xda-developers.com/showthread.php?t=1618718
JIUI v4(MIUI v4) & JWP7(Windows Phone 7 MOD): http://forum.xda-developers.com/showthread.php?p=26890050#post26890050
DEFY/DEFY+ ICS BUILDS
Note: Please visit ORIGINAL THREAD for latest versions. I am trying my best to keep it up to date
- JIUI JB(MIUI JB) See here
-CM9
-JIUI v4(MIUI v4 Port)
-JWP7(Windows Phone 7 Mod)
-WIUI
-Codename Android 1.6.0
-IMM76I 4.0.4 AOKP
-CM9 kangs by FuZZ_
-[MOD Collection][CM9]All in One package v1.65 by Pottkopp
MODS:
CyanogenMod 9 UI Enhancements | All phones Thread Tools: http://forum.xda-developers.com/showthread.php?t=1531222
V6 Supercharger: http://forum.xda-developers.com/showthread.php?t=1531222
JIUI v4​
About JIUI v4
- Based on Epsylon 13/06/2012 and Quarx 08/03/2012
- Very Smooth
- Camera Works
- Updated drivers
- Updated Recovery(TWRP(Complete touch recovery))
Known Issues:
- Obviously wifi tether doesn't work
- FM Radio doesn't work
Original Thread: http://forum.xda-developers.com/showthread.php?t=1687856
Flashing Instructions:
1.Wipe data/factory Reset, wipe cache, wipe dalvik cache.
2.Flash JIUI v4
3.Reboot. First boot takes along time, be patient.
4.After boot, you might find it a bit lag. This happens. After first boot is complete, use it for 5 minutes and reboot it. Your lag issue will be solved
JWP7​
About JWP7
JWP7 is rom with few added apps to make it look like Windows Phone, also few tweaks are added to increase battery life. Try it, you will like it.
About JWP7(GB Stable) Also ICS version available
- Based on MIUI
- Added few applications to make it look like WP7
- Added few CPU tweaks
- Added 4-way Reboot Mod
- Added MIUI Extended Settings
- Added TWRP recovery
- V6 supercharged.
- Added WP7 style keyboard with SWIPE and lots more!!!!!!
DOWNLOAD LINKS:
Original Thread: http://forum.xda-developers.com/showthread.php?t=1687856
Flashing Instructions: (Same for all versions)
1. If you are on CWM, download and flash TWRP Recovery via CWM.
2. Reboot and enter into CWM. Mount your SDCARD(TOOLS->Share SDCARD).
3. In SDCARD you will find a folder called TWRP, open it and copy the JWP7 into TWRP->BACKUPS->0000000000 folder.
4. Now select TOOLS->Stop Usb Share.
5. Select Recovery->Stable Recovery->Wipe. Wipe Cache, Dalvik Cache, Factory Reset. Once done go back to previous menu.
6. Select Restore and now select JWP7. Restore it and go back to previous menu. Reboot->System. (Note: Don't wipe anything after selecting restore because everything is pre-configured)
CM9​
Thanks to QUARX and EPSYLON. It will easy for them to track bugs, if you guys use the thread below to report your bugs
CM9 Bug Tracking: http://forum.xda-developers.com/showthread.php?p=25458293#post25458293
Epsylon' original thread: http://forum.xda-developers.com/showthread.php?t=1353003 You can visit here for change log and related queries
Quarx thread: http://forum.xda-developers.com/showthread.php?t=1595898 You can visit here for change log and related queries
To make things easier, DEFY guys use the one in green and DEFY+/DEFY(RED LENS) use the one in RED
ROM LIST(Contains Links to CM9 All Builds)
Defy Green Lens Only
Defy CM9 nighties by Epsylon(Defy Green Lens Only): http://defy.wdscript.fr/defy-cm9/
Defy CM9 nighties by quarx2k(Defy Green Lens Only): http://quarx2k.ru/cm9-nightly-defy/
Defy RED Lens And Defy+
Defy CM9 nighties by quarx2k(Defy RED Lens And Defy+): http://quarx2k.ru/cm9-nightly-defy+/
Defy CM9 nighties by Epsylon(Defy RED Lens And Defy+): http://defy.wdscript.fr/defyplus-cm9/
Battery FIX for Defy Red Lense: http://www.4shared.com/zip/UR1QUISz/...ttery_Fix.html
GOOGLE APPS FOR CM9: http://goo.im/gapps/gapps-ics-20120317-signed.zip
YOU HAVE TO FLASH THIS KERNEL FOR CM9
Defy(GREEN LENS) Froyo kernel: http://m.cfa.aero/misc/CM7_Kernel-signed.zip
Defy(RED LENS) GB Kernel: http://m.cfa.aero/misc/CM9_Kernel-signed.zip
DEFY+ users don't flash any kernels.
FLASHING INSTRUCTIONS
Put the CM9 zip and google apps and kernel in case of DEFY(Red Lens)
Upgrading from Any version of ANDROID to CM9
1.Now REBOOT your phone. Press vol- when blue led appears. Now you will enter into CLOCKWORK MOD recovery. Make a NANDROID BACKUP.(PROCEDURE IS GIVEN BELOW)
2.Now navigate back to main menu. Select Recovery->Stable or Custom Recovery.Wipe data/Factory Reset,Wipe Cache. Then select Advanced->Wipe Dalvik Cache. Go back to previous menu.
3.Select install zip from SDCARD-> choose the ROM or UPDATE zip from SDCARD.Navigate to the zip file you downloaded and press POWER button.Now it will install.
4.Flash with respective kernel in the same way(DEFY Red Lens only). Use the same procedure to flash Google apps.
5.Once installation is complete, navigate back and select REBOOT.
6.First boot will take some time. Be patient.
Upgrading from CM7 to CM9 follow these steps
1.Now REBOOT your phone. Press vol- when blue led appears. Now you will enter into CLOCKWORK MOD recovery. Make a NANDROID BACKUP.(PROCEDURE IS GIVEN BELOW)
2.Now navigate back to main menu. Select Recovery->Stable or Custom Recovery.Wipe Data/Factory Reset,Wipe Cache. Then select Advanced->Wipe Dalvik Cache. Go back to previous menu.
3.Select install zip from SDCARD-> choose the ROM or UPDATE zip from SDCARD.Navigate to the zip file you downloaded and press POWER button.Now it will install.
4.Flash with respective kernel in the same way(DEFY Red Lens only). Use the same procedure to flash Google apps.
5.Once installation is complete, navigate back and select REBOOT.
6.First boot will take some time. Be patient.
Upgrading from CM9 to new version of any CM9 follow these steps
1.Now REBOOT your phone. Press vol- when blue led appears. Now you will enter into CLOCKWORK MOD recovery. Make a NANDROID BACKUP.(PROCEDURE IS GIVEN BELOW)
2.Now navigate back to main menu. Select Recovery->Stable or Custom Recovery.Wipe Cache. Then select Advanced->Wipe Dalvik Cache. Go back to previous menu.
3.Select install zip from SDCARD-> choose the ROM or UPDATE zip from SDCARD.Navigate to the zip file you downloaded and press POWER button.Now it will install.
4.Flash with respective kernel in the same way(DEFY Red Lens only). Use the same procedure to flash Google apps.
5.Once installation is complete, navigate back and select REBOOT.
6.First boot will take some time. Be patient.
Codename Android​
Codename Android is a fully open source rom that focuses on speed, usability, and getting every feature that we can get CRAMMED in there .
Our mission is to spread the Open Source Android love to as many people as possible, and get as many people involved as possible. Please visit the original thread it has lot of stuff. You will LOVE IT.
ORIGINAL THREAD:http://forum.xda-developers.com/showthread.php?t=1585905
Latest Version: http://www.wuala.com/Sesme/Android/AOSP/Codename-Android-(MOD)-1.6.0-DFY.zip/
FLASHING INSTRUCTIONS
BACKUP your APPS. Put the zip in SDCARD.
1. Make a backup
2. wipe data/factory,wipe cache, wipe dalvik cache reset in recovery
3. flash the rom
4. reboot
5. sign in(You don't have to flash GAPPS)
6. wait for the phone to restore all your apps
7. reboot
WIUI(ONLY FOR DEFY)​
Thanks to Wajk for doing a tremendous job. I am adding this to thread because this ROM is excellent.His rom are known as WIUI, its based on MIUI so don't get confused.
Note:ICS Rom by Wajk is based on CM9, so you might find the same bugs found in CM9 but UI is based on MIUI. If you want to change everything according to your wish, you can do it with this ROM. CM9 is no where near when it comes to customizing
Original Thread:http://forum.xda-developers.com/showthread.php?t=1161110
FLASHING INSTRUCTIONS
BACKUP your APPS. Put the zip in SDCARD.
1.Now REBOOT your phone. Press vol- when blue led appears. Now you will enter into CLOCKWORK MOD recovery.
2.Now navigate back to main menu. Select Recovery->Stable or Custom Recovery.Wipe data/Factory Reset,Wipe Cache. Then select Advanced->Wipe Dalvik Cache. Go back to previous menu.
3.Select install zip from SDCARD-> choose the ROM or UPDATE zip from SDCARD.Navigate to the zip file you downloaded and press POWER button.Now it will install.
4.Once installation is complete, navigate back and select REBOOT.
5.First boot will take a long time. Be patient.
IMM76I 4.0.4 AOKP​
Original Thread: http://forum.xda-developers.com/showthread.php?t=1585425
Latest build: Milestonte 5 beta 8: http://www.mediafire.com/?3css0qddwd9dl7d
aokp build 28: http://www.wuala.com/Sesme/Android/MIUI/AOPK/aopk-jordan-build28.zip/
Gapps: http://goo.im/gapps
FLASHING INSTRUCTIONS
BACKUP your APPS. Put the zip in SDCARD.
1.Now REBOOT your phone. Press vol- when blue led appears. Now you will enter into CLOCKWORK MOD recovery.
2.Now navigate back to main menu. Select Recovery->Stable or Custom Recovery.Wipe data/Factory Reset,Wipe Cache. Then select Advanced->Wipe Dalvik Cache. Go back to previous menu.
3.Select install zip from SDCARD-> choose the ROM or UPDATE zip from SDCARD.Navigate to the zip file you downloaded and press POWER button.Now it will install.
4.Once installation is complete, navigate back and select REBOOT.
5.First boot will take a long time. Be patient.
CM9 kangs by FuZZ_​
Source: http://forum.xda-developers.com/showthread.php?t=1673116
DEFY: http://fitsnugly.euroskank.com/skankwich/?id=jordan
DEFY+: http://fitsnugly.euroskank.com/skankwich/?id=jordanplus
Flashing Instructions:
BACKUP your APPS. Put the zip in SDCARD.
1.Now REBOOT your phone. Press vol- when blue led appears. Now you will enter into CLOCKWORK MOD recovery. Make a NANDROID BACKUP.(PROCEDURE IS GIVEN BELOW)
2.Now navigate back to main menu. Select Recovery->Stable or Custom Recovery.Wipe Cache. Then select Advanced->Wipe Dalvik Cache. Go back to previous menu.
3.Select install zip from SDCARD-> choose the ROM or UPDATE zip from SDCARD.Navigate to the zip file you downloaded and press POWER button.Now it will install.
4.Flash with respective kernel in the same way(DEFY Red Lens only). Use the same procedure to flash Google apps.
5.Once installation is complete, navigate back and select REBOOT.
6.First boot will take some time. Be patient.
[MOD Collection][CM9]All in One package v1.65 by Pottkopp​
Download Link: http://dl.dropbox.com/u/66678754/Android/AiO/AiO-aroma_v1.65.zip
Original Thread: http://forum.xda-developers.com/showthread.php?t=1535540
Flashing Instructions:
BACKUP your APPS. Put the zip in SDCARD.
1.Now REBOOT your phone. Press vol- when blue led appears. Now you will enter into CLOCKWORK MOD recovery. Make a NANDROID BACKUP.(PROCEDURE IS GIVEN BELOW)
2.Now navigate back to main menu. Select Recovery->Stable or Custom Recovery.Wipe Cache. Then select Advanced->Wipe Dalvik Cache. Go back to previous menu.
3.Select install zip from SDCARD-> choose the ROM or UPDATE zip from SDCARD.Navigate to the zip file you downloaded and press POWER button.Now it will install.
4.Flash with respective kernel in the same way(DEFY Red Lens only). Use the same procedure to flash Google apps.
5.Once installation is complete, navigate back and select REBOOT.
6.First boot will take some time. Be patient.
MAKING A NANDROID BACKUP:​
- In the CLOCKWORK MOD recovery, choose Recovery->Stable or Custom Recovery->Backup and Restore->Backup(all).
- Once Backup is complete you can continue your process. NOTE: Use vol+ and vol- and power button to navigate back.
Queries Are Welcomed
​IF THIS THREAD WAS USEFUL, PLEASE RATE IT.
ANY BROKEN LINKS, PLEASE REPORT.
Old one is closed so people can use this New thread ..Good Work
Nice one -_-
Edit : OK this is helpful
Sent from my MB525 using XDA
Well this thread was made by a fan of adimotion
Enviado desde mi MB526 usando Tapatalk
GUYS, GUYS solve it down all right. If a new user wants to flash CM9 he won't know anything about Epslyon or Quark builds and finding links is not that easy. So everyone end up with adi4motion thread which was very useful as you can find everything there, no need to search for any needed stuff. Its not that he was taking credit from either of DEV's neither i do. Just making things easier for users who want to try CM9 and that's just it. No offence. Just trying to help users.
Hai,
I've got a question about the battery life. Could it be that it is a lot shorter now i'm using cm9 than when i was on cm7? I could do a hole day, from evening to evening, but now sometimes i have to charge 2 times a day! I have battery fix installed on my red lens defy.
egmruigrok said:
Hai,
I've got a question about the battery life. Could it be that it is a lot shorter now i'm using cm9 than when i was on cm7? I could do a hole day, from evening to evening, but now sometimes i have to charge 2 times a day! I have battery fix installed on my red lens defy.
Click to expand...
Click to collapse
Try using CPU tuner from market also use V6 supercharger. You will find a huge difference and don't use any task killer.
Changelog?
Hey,
I was wondering if you could include a changelog in the 1st post? It'll be useful in case anybody didn't want to update everytime a new version came out.
Thanks!
Motorola Defy running CM7.2 RC2
Columban said:
Hey,
I was wondering if you could include a changelog in the 1st post? It'll be useful in case anybody didn't want to update everytime a new version came out.
Thanks!
Motorola Defy running CM7.2 RC2
Click to expand...
Click to collapse
ya would love to do that. but i can't do that because it makes bug tracking harder this is why they closed adi4motion thread. So you want, visit the original thread and ask the builder. If it was WIUI i can say but not for CM9 builds. I will try my best to post the change log. Have to ask people before doing anything like that.
This might help a few users but wasn't needed..
Even Multiple threads about same information makes stuff confusing sometimes..
Doesn't matter from where I send it, what matters is written above
neo.ank said:
This might help a few users but wasn't needed..
Even Multiple threads about same information makes stuff confusing sometimes..
Doesn't matter from where I send it, what matters is written above
Click to expand...
Click to collapse
It is never about CM9. Its about all ICS ROM and strictly no bug reports. I don't want to confuse users.
Columban said:
Hey,
I was wondering if you could include a changelog in the 1st post? It'll be useful in case anybody didn't want to update everytime a new version came out.
Thanks!
Motorola Defy running CM7.2 RC2
Click to expand...
Click to collapse
Change log included temporarily
Thanks! I'll visit the original post and ask regarding changelog
Sent from my MB525 using Tapatalk
Columban said:
Thanks! I'll visit the original post and ask regarding changelog
Sent from my MB525 using Tapatalk
Click to expand...
Click to collapse
Its been added here. In the first thread itself
Isn't the latest AOKP the milestone 5 beta 8?
Sent from my MB525 using XDA
NI55AN said:
Isn't the latest AOKP the milestone 5 beta 8?
Sent from my MB525 using XDA
Click to expand...
Click to collapse
Link added.
I know you've got a long op already but maybe it would be good to add links the various mods available to ics roms like ics reloaded and v6 supercharger.
Edit: http://forum.xda-developers.com/showthread.php?t=1535540 (CM9 all-in-one package)
http://forum.xda-developers.com/showthread.php?t=1531222 (reloaded ICS)
http://forum.xda-developers.com/showthread.php?t=991276 (v6 supercharger, 2nd post has ICS information.)
Sent from my MB525 using XDA
NI55AN said:
I know you've got a long op already but maybe it would be good to add links the various mods available to ics roms like ics reloaded and v6 supercharger.
Edit: http://forum.xda-developers.com/showthread.php?t=1535540 (CM9 all-in-one package)
http://forum.xda-developers.com/showthread.php?t=1531222 (reloaded ICS)
http://forum.xda-developers.com/showthread.php?t=991276 (v6 supercharger, 2nd post has ICS information.)
Sent from my MB525 using XDA
Click to expand...
Click to collapse
Links will be added for sure. thanks for your suggestion.
Forgot this flash video fix for 19/5/12 epsylon defy build.
http://forum.xda-developers.com/attachment.php?attachmentid=1068736&d=1337349712
Originally posted by ShurikKb
Thread: http://forum.xda-developers.com/showthread.php?p=26254762
Sent from my MB525 using XDA
I'd consider something a little more subtle.. color wise.
The start post and your signature make my eyes hurt.

[Q] Xperia Arc Issue

Hi guys, I have recently loaded UHD 3.0.2 onto my Sony Ericcson Xperia Arc, but when trying to complete the last step below, my phone wont enter CWM. The phone isn't in a boot loop but the Wifi isnt working and I do have the modules on my SD card.
C. Install custom rom
========================
. Turn on ur phone now then keep pressing volume down to enter CWM.
. Standard operation before installing new rom :
- wipe data/factory reset
- wipe cache partition
- mount and storage -> format /system
- advanced -> wipe dalvik cache
- advanced -> wipe battery stats
. Now install zip from sdcard -> choose the UHD zip file, and follow the instruction in aroma. After finish don't reboot yet.
. Unchecked the reboot in aroma, after finish, u will be back in cwm.
. Now install the wifi modules first ( usually the custom kernel have their own wifi modules).
. reboot system.
. Finish
Please Help!!
Ejazr said:
Hi guys, I have recently loaded UHD 3.0.2 onto my Sony Ericcson Xperia Arc, but when trying to complete the last step below, my phone wont enter CWM. The phone isn't in a boot loop but the Wifi isnt working and I do have the modules on my SD card.
C. Install custom rom
========================
. Turn on ur phone now then keep pressing volume down to enter CWM.
. Standard operation before installing new rom :
- wipe data/factory reset
- wipe cache partition
- mount and storage -> format /system
- advanced -> wipe dalvik cache
- advanced -> wipe battery stats
. Now install zip from sdcard -> choose the UHD zip file, and follow the instruction in aroma. After finish don't reboot yet.
. Unchecked the reboot in aroma, after finish, u will be back in cwm.
. Now install the wifi modules first ( usually the custom kernel have their own wifi modules).
. reboot system.
. Finish
Please Help!!
Click to expand...
Click to collapse
Hi Ejazr,
When you finish with aroma press the back key, then select advanced (the last option, in the bottom), and there you'll find the option reboot recovery, select it, then follow with the wifi modules etc.
Good luck.
Sent from my GT-S5830 with The Ultimatum, Swap All OC, Viper and Fly-On mod
BajoPrimate said:
Hi Ejazr,
When you finish with aroma press the back key, then select advanced (the last option, in the bottom), and there you'll find the option reboot recovery, select it, then follow with the wifi modules etc.
Good luck.
Sent from my GT-S5830 with The Ultimatum, Swap All OC, Viper and Fly-On mod
Click to expand...
Click to collapse
Hi BajoPrimate,
Thank you for your quick reply I really appreciate it!, I am very very new to this, but what I try to do to enter the CWM mode is shutdown the phone, turn it back on while pressing the down volume button, but it doesn't seem to do anything, it just boots into the normal phone screen, Please help as I desperately need to resolve the issue with my Wi-Fi not authenticating.
Ejazr said:
Hi BajoPrimate,
Thank you for your quick reply I really appreciate it!, I am very very new to this, but what I try to do to enter the CWM mode is shutdown the phone, turn it back on while pressing the down volume button, but it doesn't seem to do anything, it just boots into the normal phone screen, Please help as I desperately need to resolve the issue with my Wi-Fi not authenticating.
Click to expand...
Click to collapse
Hi Ejazr, try another key, in my brother's phone it's the back key, but it could be another, reboot and try eventually you'll get it.
Edited : my brother says that with this room he uses volumen down key also, so I don't know, perhaps you could try installing x-parts from the market, but be careful, I'm not sure now. Sorry and good luck.
Good luck, and you're welcome.
Sent from my GT-S5830 with The Ultimatum, Swap All OC, Viper and Fly-On mod
Well, just Flash the .587 ftf . and then flash the kernel, and then install ROM from CWM. It should work if your did this procedural properly.
Wish the best . :good:

[Q] Help me! Flash kernel problem!

Im a new with this kind thing.
I flash custom kernel which is cm_anzu-LX-20130926-NIGHTLY provided in moPROJECT42 v8 rom.
then, i open my phone the logo kernel is out.After that my phone is blank. Nothing happen.
I dont know my step using flashtool to flash kernel is right or wrong.. Somebody help me?
I cant open my Phone.
My step using flashtool- i connect my phone in fastboot (blue light)>Open FlashTool>Click Flash Device>Fastboot mode>i choose "select kernel to flash">then i choose that kernel boot.img>then only 2 or 3 second its say done. I disconnect my phone and i open, see the Logo, then just black screen.
somebody can help me?
My device is Xperia Arc S. Already unlock bootloader. Already root and install X-part for CWM.
next time read the instructions provided by the ones who posted whatever it is that you have downloaded.
> after using FlashTool to flash the kernel restart your phone.
> then right at the moment you see the kernel's logo on the screen press any of
the hardware buttons of your phone repeatedly until your phone enters recovery
mode.
> inside the recovery mode choose "install update zip" or something like that,
then choose the .zip file you wish to install, in this case, its the CM10.1 LX ROM
that you have downloaded. wait until it is done.
> then wipe data, cache and dalvik cache.
> restart the phone.
for more details i suggest that you go back and read the instruction provided in the thread where you saw that ROM, and use the search function for tutorial on how to properly install ROMS and Kernel and what not.
now, have a nice day!
vorne said:
next time read the instructions provided by the ones who posted whatever it is that you have downloaded.
> after using FlashTool to flash the kernel restart your phone.
> then right at the moment you see the kernel's logo on the screen press any of
the hardware buttons of your phone repeatedly until your phone enters recovery
mode.
> inside the recovery mode choose "install update zip" or something like that,
then choose the .zip file you wish to install, in this case, its the CM10.1 LX ROM
that you have downloaded. wait until it is done.
> then wipe data, cache and dalvik cache.
> restart the phone.
for more details i suggest that you go back and read the instruction provided in the thread where you saw that ROM, and use the search function for tutorial on how to properly install ROMS and Kernel and what not.
now, have a nice day!
Click to expand...
Click to collapse
thx sir! my problem have been solved. my problem is i not transfer my room zip into my sd card. so i cant install update zip. But what i do is flash back to stock kernel and do the right things back. Sorry for my noob question. Im just newbie here

Categories

Resources