My mother powered down her phone and when she turned it back it comes back up to this screen
Bravoc DVT2 Ship S-0N
HBOOT-1.06.0000
MICROP-051e
TOUCH Panel-SYNT0101
Radio-2.15.00.02.17
Dec 22 2010 16:16:39
HBOOT USB PLUG
<vol up> to previous item
<vol down> to next item
<power> to select
FASTBOOOT
RECOVERY
CLEAR STORAGE
SIMUNLOCK
a few secs after the phone starts up it flashs PB99diag.zip and pb99img.zip missing
the buttons on the phone do not function
I have tried installing android-sdk, htc sync, hboot drivers and cannot get the phone to found when on my Windows 7 64 bit machine, so I can push a new pb99img.zip to the phone...but i cannot get the phone to be found.
In device mananger it shows up as Android 1.0.
I can manually install the drivers but adb will still not show the device as listed.
The phone is not in USB debugging mode since none of this was intentional.
If anyone has any tips or advice it would be most aprreciated.
Did you root the phone previously? Did you install a custom ROM on it?
What you see is the HBOOT menu. To move the marker down you press the volume down button, to move it up you press the volume up button, and to make a selection you press the power button. Can you tell me if this works?
What happens if you take out the battery, put it back in and press the power button? I doubt it that the phone enters the HBOOT menu on it's own. Is that what you are saying? Normally you need to press and hold down the volume down button and the power button to enter this menu. So to stop entering the HBOOT menu just stop holding down the volume button when you power it on. If it enters HBOOT menu by its own will then something is wrong.
When you enter the HBOOT menu the phone will automatically look for a file called PB99img.zip or PB99diag.zip. This is sort of a fail-proof mechanism. It allows you to flash images or diagnose the phone when everything else fails, like in the case you loose button control. If it doesn't find any such file it will skip the operation. This is normal. It's the equivalent of putting a bootable CD or DVD in your Windows computer - if it's present at system boot it will boot off the CD/DVD and if it's not it will just skip it and continue booting current OS.
As for the ADB driver, check this out. You may need to change the hardware IDs in the driver INF file (android_winusb.inf).
Fractalogic said:
Did you root the phone previously? Did you install a custom ROM on it?
What you see is the HBOOT menu. To move the marker down you press the volume down button, to move it up you press the volume up button, and to make a selection you press the power button. Can you tell me if this works?
What happens if you take out the battery, put it back in and press the power button? I doubt it that the phone enters the HBOOT menu on it's own. Is that what you are saying? Normally you need to press and hold down the volume down button and the power button to enter this menu. So to stop entering the HBOOT menu just stop holding down the volume button when you power it on. If it enters HBOOT menu by its own will then something is wrong.
When you enter the HBOOT menu the phone will automatically look for a file called PB99img.zip or PB99diag.zip. This is sort of a fail-proof mechanism. It allows you to flash images or diagnose the phone when everything else fails, like in the case you loose button control. If it doesn't find any such file it will skip the operation. This is normal. It's the equivalent of putting a bootable CD or DVD in your Windows computer - if it's present at system boot it will boot off the CD/DVD and if it's not it will just skip it and continue booting current OS.
As for the ADB driver, check this out. You may need to change the hardware IDs in the driver INF file (android_winusb.inf).
Click to expand...
Click to collapse
Thank you for the quick reply...apparently my mother spilled something on the phone and it was acting up a little so she powered it down and when you powered it back up it came up to the HBOOT screen. The phone is stock it has never been rooted and no custom roms either. When I pull the battery the phone turns off, I can then put it back in and press power and then i am stuck at HBOOT. Once on the HBOOT screen none of my buttons function, not the volume or power buttons none of them. I have made sure to only press the power button when powering up and yes it still enters HBOOT. Thanks for the link on the adb driver info I will check it out with all haste.
Thank you for ADB driver info it was truly appreciated...my Hardware IDs are correct...the driver installs as Android ADB Interface yet adb or htc's ruu utility neither one acknowledges the phones existence. Is is possible that the phone is hosed?
have you tried selecting fastboot and then selecting reboot?
Flash the stock HBOOT image
sadklown2 said:
Thank you for the quick reply...apparently my mother spilled something on the phone and it was acting up a little so she powered it down and when you powered it back up it came up to the HBOOT screen. The phone is stock it has never been rooted and no custom roms either. When I pull the battery the phone turns off, I can then put it back in and press power and then i am stuck at HBOOT. Once on the HBOOT screen none of my buttons function, not the volume or power buttons none of them. I have made sure to only press the power button when powering up and yes it still enters HBOOT. Thanks for the link on the adb driver info I will check it out with all haste.
Thank you for ADB driver info it was truly appreciated...my Hardware IDs are correct...the driver installs as Android ADB Interface yet adb or htc's ruu utility neither one acknowledges the phones existence. Is is possible that the phone is hosed?
Click to expand...
Click to collapse
I'm thinking that maybe... only maybe... the spilled liquid was sticky (and surely conductive) so that the volume down button is kept depressed, so when you press the power on button it acts as you are pressing volume down and power button. It's probably far fetched but it is possible that the volume down button is depressed for one or another reason.
Yes, I think it will say like "Android ADB Interface" when you plug the phone in while in HBOOT. It will say something else I think when you plug it in while in recovery, etc.
I don't think you can use ADB commands while in HBOOT. I think ADB commands only work when the phone is booted up. If you can enter fastboot mode you can use Fastboot commands to flash a new HBOOT for instance.
But since you can't control the interface at all and no button seems to work on the phone, I think you have to try flashing a new HBOOT by placing a ZIP file on the SD card.
Go to AlphaRev website.
Download PB99IMG_stock.zip
Rename it to PB99IMG.zip.
Take out the SD card and put it in the computer.
Copy the PB99IMG.zip file to the SD card.
Take out the SD card and put it in the phone.
Insert the battery and power on the phone.
It will now automatically flash it with stock HBOOT image. Keep in mind that this may or may not erase personal data from either the phone or the SD card. I don't take any responsibilities for any data loss. I know you can't access the phone apps and internal data right now, but you can at least take a backup of the SD card, most apps are storing data on the SD card so you could use that to restore at least parts of the data later.
Fractalogic said:
I'm thinking that maybe... only maybe... the spilled liquid was sticky (and surely conductive) so that the volume down button is kept depressed, so when you press the power on button it acts as you are pressing volume down and power button. It's probably far fetched but it is possible that the volume down button is depressed for one or another reason.
Yes, I think it will say like "Android ADB Interface" when you plug the phone in while in HBOOT. It will say something else I think when you plug it in while in recovery, etc.
I don't think you can use ADB commands while in HBOOT. I think ADB commands only work when the phone is booted up. If you can enter fastboot mode you can use Fastboot commands to flash a new HBOOT for instance.
But since you can't control the interface at all and no button seems to work on the phone, I think you have to try flashing a new HBOOT by placing a ZIP file on the SD card.
Go to AlphaRev website.
Download PB99IMG_stock.zip
Rename it to PB99IMG.zip.
Take out the SD card and put it in the computer.
Copy the PB99IMG.zip file to the SD card.
Take out the SD card and put it in the phone.
Insert the battery and power on the phone.
It will now automatically flash it with stock HBOOT image. Keep in mind that this may or may not erase personal data from either the phone or the SD card. I don't take any responsibilities for any data loss. I know you can't access the phone apps and internal data right now, but you can at least take a backup of the SD card, most apps are storing data on the SD card so you could use that to restore at least parts of the data later.
Click to expand...
Click to collapse
No, no, no. Whats flashing hboot going to do? the phone is "water damaged". Also his phone is s-on and never rooted and u can only use alpharev hboots while s-off. Also he has a BravoC so i dont think Alpharev hboots work. Please learn some basic stuff before telling other to do things that r wrong and wont work.
@ OP i have no solution really apart from taking the phone apart and cleaning it maybe. but its water damaged so i think the only solution would be to run the correct ruu for ur phone and hope it boots or take it to a repair shop. If it was me, i would take it apart, clean it, put back together and try the ruu for ur device. But thats just my opinion. Seeing that the phone is not working then its prob worth a shot.
jmcclue said:
No, no, no. Whats flashing hboot going to do? the phone is "water damaged". Also his phone is s-on and never rooted and u can only use alpharev hboots while s-off. Also he has a BravoC so i dont think Alpharev hboots work. Please learn some basic stuff before telling other to do things that r wrong and wont work.
@ OP i have no solution really apart from taking the phone apart and cleaning it maybe. but its water damaged so i think the only solution would be to run the correct ruu for ur phone and hope it boots or take it to a repair shop. If it was me, i would take it apart, clean it, put back together and try the ruu for ur device. But thats just my opinion. Seeing that the phone is not working then its prob worth a shot.
Click to expand...
Click to collapse
Ooops!! Me bad... sorry! Thanks for correcting me though. So his only option is running the RUU for a BravoC?
Where can you find RUU for a BravoC? On Shipped-ROMs I can only find BravoC for AllTel, Verizon and VZW. Do you have to take carrier name into consideration when choosing RUU? Are there no BravoC that are not locked to a carrier?
Nice suggestions, but I'm pretty sure the phone is just physically broken. Take it in and see if you can get a replacement/fix. BravoC is hard to wrestle with.
droid_<3er said:
Nice suggestions, but I'm pretty sure the phone is just physically broken. Take it in and see if you can get a replacement/fix. BravoC is hard to wrestle with.
Click to expand...
Click to collapse
Thanks for all the suggestions...I had tried running the ruu from htc, but since i could never hammer out the usb issues the utility kept saying that the phone has less than 30% power and would promptly fail...anyway mom decided to turn it in on the insurance so its all a moot point now...again thanks to every one who tried to help and all the great guides/info on this site at least i learned quite a bit...
Related
hi i have used evo3 on my htc desire to root and then used alpharev and boht said succussfull. Now phone starts and only shoes joker and written why so serious? doesnt go further at all. any help please
Regards
got a bootloop.. try running an RUU file (this will flash back to stack, get rid of root)
then try to root again, just a different method?
hope this helps!
how to flash with ruu if your phone is stuck not even being detected by PC. any detail please thanks regards
faisal_sherry said:
how to flash with ruu if your phone is stuck not even being detected by PC. any detail please thanks regards
Click to expand...
Click to collapse
First of all: be sure you know what you're doing. The below listed solutions might help but might also end up bricking your phone dead.
If you can enter fastboot (back while powering on the phone) and if you have a nandroid backup, you can try to flash it back using the fastboot flash command.
OR
It's possible to run the RUU update while in fastboot or hboot usb mode (back button while powering on the phone) I had the modified usb drivers installed http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install, not sure if that is needed - but the original drivers didn't work very well with my setup in general: Win7 x64 , also I uninstalled HTC Sync.
OR
If that fails, you can try to extract the rom.zip from the RUU and flash it manually (help on extracting http://lukasz.szmit.eu/2010/04/extracting-rom-files-from-htc-android.html ) JUST DON'T USE THE ROM FROM THAT TUTORIAL, THE LINK IS JUST FOR REFERENCE ON HOW TO EXTRACT THE rom.zip
The offcial RUU are in this thread, just BE SURE TO USE THE CORRECT ONE http://forum.xda-developers.com/showthread.php?t=695667
Code:
fastboot oem rebootRUU
fastboot erase cache
fastboot flash zip rom.zip
@quanchi, thanks for your help i'll try and let you know tomorrow thanks again
Regards
hi i have tried the method putting phone in fastboot mode pressing back and power phone was detected and then flashed with this rom 'RUU_Bravo_TMO_UK_1.21.110.4_Radio_32.36.00.28U_4.06.00.02_2_release_127570_signed'' and it was successufll now my phone is not turning on when i press power it vibrates but nothing on the screen but good thing is when i connect the phone with pc it still detects it its not brick yet i think any help
Regards
faisal_sherry said:
hi i have tried the method putting phone in fastboot mode pressing back and power phone was detected and then flashed with this rom 'RUU_Bravo_TMO_UK_1.21.110.4_Radio_32.36.00.28U_4.06.00.02_2_release_127570_signed'' and it was successufll now my phone is not turning on when i press power it vibrates but nothing on the screen but good thing is when i connect the phone with pc it still detects it its not brick yet i think any help
Regards
Click to expand...
Click to collapse
Is your phone SLCD? I reckon you may have flashed an incorrect RUU, in which case you'll need to get a more up-to-date one and flash it again. In case that's the most recent one for T-Mobile, you'll need to make a gold card and then flash a generic RUU. Hope that helps.
hi thanks for your reply i don't know what is slcd? and let me tell you the stat of the phone now
when i press power phone vibrates i can see button lights on the phone but nothing on the lcd screed. Phone is not going in boot mode when i press back and power nothing happens, volume up and power nothing happens. Phone is being recognized in device manager as a usb mass storage and i can see battery light on the top of the screen as well. I dont know what is the real state of my phone and what do you call it but its a t mobile UK phone that's what i know and what should i do now thanks
Regards
SLCD is a type of display present in some Desires, earliest Desires had an AMOLED display. You most probably flashed your SLCD Desire with RUU prepared for an AMOLED Desire, hence the display problems. Search the forum for "SLCD BRICK". Your phone should be able to enter fastboot/hboot, but doesn't display anything because the display handling is screwed up. Before trying to resolve your situation BE SURE TO READ ALL THE INFO ON SLCD UNBRICKING.
I have no experience with SLCD models so can't help you much on the subject, but there are numerous threads on xda detailing dealing with this particular issue.
I don't want to sound rude or holier than thou (as I had my share of bricks and semi bricks) but I did write that you should make sure you get the correct RRU...
best of luck
Sent from my HTC Desire using XDA App
hi thanks for your reply i'll try n post the result here
Regards
So here I will describe what I did to solve the exact same issue.
Remove the battery from the phone
Copy the proper RUU file to the root of my SD card naming it PB99IMG.zip
Insert battery
Power on phone holding the power and the back buttons until the fastboot menu opens
Choose recovery
Then it will go through a bunch of stuff and ask you if you want to flash the file you put on the SD card, I said yes then a few minutes later Bobs your uncle I was back to factory.
faisal_sherry said:
hi thanks for your reply i'll try n post the result here
Regards
Click to expand...
Click to collapse
Faisal, it seems apparent that your device is an SLCD Desire. When you put Alpharev on it, it did S-OFF and your boot got corrupted for some reason and looped. When you ran the RUU (which was incompatible for your SLCD, and actually meant for an AMOLED Desire), you effectively unrooted it, though not restoring it.
Check my thread for a similiar problem.
If you had made a Goldcard earlier, you're in luck. You can restore your device with a generic SLCD RUU available for your device, by either running the RUU or by flashing the rom.zip from the RUU.exe file (Tip. This file gets extracted to %TEMP% folder when you run an RUU)
Things you need to know before you try solving your problem:
Know how to use adb from the command prompt,
Search for the links to shipped-roms site containing the list of Bravo (Desire) ROMS
How to create and use a goldcard
How to navigate to the temporary folder of your Windows PC
How to turn your device on into Recovery mode and Fastboot without seeing the screen
Simple search on XDA can unravel these simple mysteries.
Now, the steps to go about solving your problem:
Find out if you have a generic unbranded HTC Desire, or a branded one. A branded Desire has a special Code which prevents you from flashing a ROM meant for any other brand and also blocks a Generic RUU. If you're from India, it is branded with HTC Asia_India. If you're unbranded, things are looking much easier for you, as generic RUUs for SLCD are easily available.
Check if you have a goldcard (A goldcard is a special microsd card you made while your device was in working condition. It will allow you to restore your device using a generic RUU or an OTA)
If you dont have a goldcard, you might try to see if Recovery can be booted up. Poweroff phone, then power it on by pressing Vol- and Poweron key, then wait 30sec and press Vol Down and Poweron button again. At this time, phone gets detected in Windows (as shown by the icon in the bottom right of taskbar and a notification sound.
Type:
Code:
adb devices
If this displays a code SH**** after "List of devices", you're in luck. You can issue an adb command and get a CID of your device, following which you can create a goldcard.
After creating a goldcard, it will allow you to run a generic SLCD RUU. Check my thread for a latest RUU.
If you dont have a goldcard, and adb doesnt show the device in Recovery mode, it means Recovery is corrupted too. In this case, Power off device. Then Poweron by pressing Back key and Power on key. Again try adb devices command. If it shows the device, follow the steps of previous step.
You can also create a goldcard by putting your microsd card into a friend's phone and following the steps needed to create a gold card
If adb doesnt show your device in either Fastboot (previous step) or in Recovery, then you're in trouble. The only way to unbrick your softbricked device is to get a Generic RUU for your device (Check shipped roms site, or search XDA), and flash it. There is also a method if you have the original OTA zip for your device. Check teppic74's posts on XDA for this method.
If you have an Indian Desire, you're done for as I found out. If you dont have a goldcard for an Indian Desire, or the OTA zip, you have no option than to return it to HTC. Dont worry about Warranty being lost if it is a new phone. HTC has to repair it according to their Warranty policy.
Goodluck. I've summarized all methods available to unbrick an SLCD. For more details on any one method, try searching with the appropriate keywords from my post. It's all on XDA.
@droidzone, hi thanks for your time and reply here. the thing is i am very very basic user. Can you please tell me do i have to install htc sync first and i dont have any gold card before rooting. after following this procedure
"switch off phone. press and hold volume down. press power. release volume down after 5 seconds. wait for 30 seconds. press volume down. press power. the phone should vibrate. wait 40 seconds. the phone should be in recovery."
pc detects the phone but when i run ruu it doesn't find the phone and i have OTA downloaded as well and i have copied to micro sd but i dont know how to use this OTA. i'm sorry for being very basic
Regards
faisal_sherry said:
@droidzone, hi thanks for your time and reply here. the thing is i am very very basic user. Can you please tell me do i have to install htc sync first and i dont have any gold card before rooting. after following this procedure
"switch off phone. press and hold volume down. press power. release volume down after 5 seconds. wait for 30 seconds. press volume down. press power. the phone should vibrate. wait 40 seconds. the phone should be in recovery."
pc detects the phone but when i run ruu it doesn't find the phone and i have OTA downloaded as well and i have copied to micro sd but i dont know how to use this OTA. i'm sorry for being very basic
Regards
Click to expand...
Click to collapse
@Faisal,
No prob. Everyone is a newbie at the beginning!
But, you need to search and find out some things on XDA, and there are a lot of newbie centric guides over here which explain procedures step by step..
You need to do these by yourself though:
1. Install Android SDK. It just involves downloading the setup file, running it, and finding out where in Windows it has been installed. In the main installation folder, there is a Folder called Tools. You need to open a command prompt in that folder and run adb.exe for most of the procedures. Follow this guide to install the SDK.
2. After you have the sdk installed, boot your phone into recovery using the procedure you quoted. As you said, the phone will be detected in Windows. At this point, run the following command from a command prompt in your tools folder.
Code:
adb devices
This will output "List of devices" followed by a code starting with SH. If it does, you're in luck. You can now create a goldcard, and proceed. Follow this guide for this.
3. If the "adb devices" does not show any devices (in recovery/Boot mode), and you dont have a goldcard, you've run out of luck, pal. Honestly, no one on any forum has solved the issue with this combo.
There would still be a solution, if you have the RUU. I dont see why your RUU does not run. Try to run it in one of the following modes.
a. Switch off phone
Switch it on by pressing Back key followed by Back+Power key, then slowly releasing Powerkey while keeping Back key. This is the bootloader mode.
b. Recovery mode. Power off, power on by Vol down + Power key, then slowly release Power key. After 30 sec, press Vol down once, then power key once. Wait 1 min and see if pc detects device. Else press power key once again.
In either of these modes, the RUU you downloaded should down. If it is the incorrect RUU for your location, it will give a customer id error. If it has an incorrect bootloader version, it will show a Bootloader version error. In either of these cases, try the newest generic SLCD RUU from shipped roms. If this still gives one of the above errors, your phone is a branded phone. In this case, you WILL NEED a gold card to work.
Note that if adb devices shows your phone, then you can create a goldcard at this point.
If adb does not show your devices, and the latest generic RUU does not run, and you cant find a correct RUU for your device, then tough luck. I am yet to find a solution to this problem. Return it to HTC.
faisal_sherry said:
@droidzone, hi thanks for your time and reply here. the thing is i am very very basic user. Can you please tell me do i have to install htc sync first and i dont have any gold card before rooting. after following this procedure
Click to expand...
Click to collapse
Yes, you need to have HTC sync installed for the drivers. But the HTC sync main program should not remain in the system tray (bottom right). If it is, close it by rightclicking and Exiting.
The problem with what devin mm said is that an SLCD desire doesnt show anything on screen if bricked. Yet, recovery may be selectable for some, without seeing anything. But if you ran the RUU, then most probably the recovery itself is corrupted and selecting a zip file on memory card wont be possible at this point.
Sorry that I wont be able to follow this thread for the next few days. I'm travelling, and since my Desire is with HTC repair centre, no Net. Hopefully, someone else on XDA can help out with any more qns..
I appoligise if this has been asked before.
I have a HTC Desire Z which I have rooted using the Cyanogen Wiki Method which i believe was successful, I wanted to check whether I was S-Off before loading custom roms.
wiki.cyanogenmod.com/index.php?title=HTC_Desire_Z:_Rooting
I read on a forum you should bootload to check, so i held power and VOL up on restart however now i have a black screen with a flashing red led at the top and am unable to get out of this mode does anyone have any advise what I need to do?
Anything would be helpful I'm in the UK military currently deployed on OPS this is my only means of comms to family. Thanks in advance.
Crap, so you're stuck in bootloader huh? Well if you have a PC with you then thats good news. Cause you can just flash something via your bootloader if you have ADB set up.
Wait, you said it has a red led lit right?... the battery might have died on you in all honesty because that's the only time a red/amber led would come on. If this is the case just leave it charging for like 20 minutes before try to turn it on.
Anyways, if that isn't the issue try getting the screen onto that bootloader page. As soon as you get to that you can start fixing it. It should say FASTBOOT_USB or something similar to that. Now on your pc start up your CMD Prompt (Run > 'cmd'). From there try typing Fastboot devices and it should list your device as HT########. If you can get to that then we're doing well.
BEFORE you try this, just note I've never fastboot flashed a ROM and I only posted this because you seem to need it urgently. If you can wait, then post what you've actually done to the phone so I can provide you with a more tailored solution that will work. (post whether the phone is rooted, s-off or superCID or just the guides and where you got stuck)
Now what you need to do is plug your microSD into your laptop and do this:
Aegishua said:
Before you do this please do the following:
1a. Download the RUU I’ve linked (it should be a ~300mb exe file)
1b. Run the setup until you get to the screen with the tick boxes
1c. Goto C:\Users\<your account name>\AppData\local\temp. Then right click and Sort By Date Modified. Look for the most recently created folder which should look like {xxxxxxx-xxxxxx-xxxxxxxx}. Then navigate into it and its parent folder. Look for rom.zip and copy that to your goldcard/memory card.
1d. Rename the rom.zip on your memory card to PC10IMG.zip
1e. Mount your sd card back onto your phone.
Click to expand...
Click to collapse
In this case you want it to be called update.zip. Now you can pop the microSD back into your phone and from there get back into your bootloader and switch to fastboot. Now when it says fastboot_usb you can run this on your PC's CMD Prompt. fastboot update /sdcard/update.zip
did you try something as simple as a battery pull? also, I noted you said power + vol up, you need to do power + vol down to enter bootloader. I seem to remember something similar happening to me back in the day.
chances are it's fine. I'd do a battery pull and boot it normally just to make sure, then power off and enter bootloader to ensure you are s-off by pressing power + vol down.
It is supposed to be volume DOWN + power, I just tried volume up, my phone vibrated 3 times and an orange light flashed continuously, but it was solved by a battery pull, and it was back to normal
Sent from my HTC Desire Z using XDA App
only charge led shows lifesigns.
**moved to new post**
[Q] Tried to install Beatmod ICS, stuck on "screensaver" usb and recovery won't work
Hi guys,
I've watched the n00b video and been googling for the last few hours as well as reading through various pages on the XDA forum. I've found a lot of problems that are kinda similar and tried various solutions but don't seem to be quite getting there.
Basically I had Virtuous Affinity as the OS and clockworkmod installed (should be the most up to date versions of both, they were put on no more than a week ago) as well. I also had a backup of current OS and so on on the SD card, as well as the original zip of the rom.
I decide I want to give ICS a go and so I downloaded the betamod ICS and then loaded it. It asked me if I wanted to do a dalvik cache wipe, a dalvik cache + data wipe and a third option I don't recall. I went with the dalvik cache wipe (at the time I was under the impression that was the correct course of action) then put it back in my pocket while ICS installed.
I get my phone out of my pocket later and it's kinda stuck on what looks like (but logically isn't, I'm guessing it was meant to be a splash screen type thing while ICS installed or some such) a screensaver which just loops endlessly. The only thing you can really do is take the battery out and turn her on again, in which case you once again end up in the endless screensaver loop.
I've tried booting to recovery using volume - and the power button and unfortunately it just boots straight into the looping screensaver again.
Getting a bit worried and feeling adventurous I tried seeing what I could do with ADB, however the computer seemed unable to recognise that any device was connected with ADB devices not listing anything.
I've read up a lot and I'm at a loss as to what to do - there's a rom on the SD card and there also should have been a backup but I just can't get it into recovery.
I do have the ability to view the SD card on another device and interact with it, so if there's a potential SD fix, that's certainly not out the window.
But yeah, I'm clueless how to proceed here and very green at the whole rom business. Can anyone advise what I might try to do from here? I don't care what state I end up going back to, or if I lose my data, I can get all that back, I just want the phone in some semblance of basic operation.
I'll be keeping an eye on the thread, if I've left out any pertinent data ask away and thanks in advance for anyone with a clue how I can fix this mess .
EDIT: Post may be better off in ICS thread above and I do apologise if so, I would move it but I seem unable to delete it.
Remove battery for 5 seconds and then try again to boot into recovery using volume -and power button.
ik222 said:
Remove battery for 5 seconds and then try again to boot into recovery using volume -and power button.
Click to expand...
Click to collapse
I have, it doesn't work. I've left the battery out for a fairly long period. Volume - + power still just brings it back to the "screensaver" loop.
Thanks for the suggestion though.
Turn the phone off completely; pull the battery out for a bit then replace it and don't touch anything. Don't try to turn it on. Plug the phone by usb to your pc (still turned off). At the command prompt in the folder containing adb.exe type "adb reboot recovery" - the phone should power on and go to recovery where you can wipe properly and reflash whatever you want.
You should be able to boot to recovery using the volume down + power button combo (hold the volume-down key, then press and hold the power button and keep both held until you get to the bootloader menu); the only thing that's wrong with your phone is that you've flashed one ROM over another without wiping it first, so the ROM can't load but this shouldn't affect your bootloader or recovery.
Worst case you can flash a RUU which will restore it to the official firmware; you'll then need to re-root and re-install a recovery image to be able to flash custom ROMs again.
Very helpful post, thanks! I'll try all that and see how I go, I'll post if I still have trouble.
Yeah I dunno why I can't boot to recovery it's weird. The volume button wasn't working, so I removed it and am pressing in the volume down portion of the volume button with a pen while holding down the power button. It's possible perhaps I'm not successfully depressing volume down, but I'm 99% sure I am and that that's not it. I am however doing it as you and other guides advise, depress volume down, hold it and then depress power and hold both for about three seconds, no joy!
Anyway, as said, I'll try what you're recommending and see how I go. Thanks!
hopscotchjunkie said:
At the command prompt in the folder containing adb.exe type "adb reboot recovery"
Click to expand...
Click to collapse
Curious what you mean by this? Cause there's no command prompt in the folder ADB is in. Do you mean in command prompt, be in the folder, i.e. c:\abd kinda thing? I tried just loading command prompt and typing abd reboot recovery, no device detected - no joy.
Ethicistabdiel said:
Curious what you mean by this? Cause there's no command prompt in the folder ADB is in. Do you mean in command prompt, be in the folder, i.e. c:\abd kinda thing? I tried just loading command prompt and typing abd reboot recovery, no device detected - no joy.
Click to expand...
Click to collapse
Yeah that was what I meant; I've got a feeling that that only works when the phone is powered off if you had USB debugging activated on the phone beforehand, so if that's not working that might be why.
c:\adb
results in error: device not found.
ADB app itself is in C:\adb\platform-tools but when I try that it goes The System cannot find the path specified. I've tried cd/adb and I can get that far but I can't get to adb/platform-tools.
EDIT:
Okay, I managed to get to c:\adb\platform-tools but adb reboot recovery is still advising error: device not found. Guessing perhaps I didn't have usb debugging enabled. Are you able to suggest another work around at all? I'm happy to flash it to whatever, I don't mind losing data, just want to get it in working order again. I don't see how I can though when I seemingly don't have access to recovery or USB...hrmm, must be some way around.
Accidental double post, sorry.
You need to try get into recovery mode, where you can do a full wipe and see if that fixes anything.
Firstly, remove your battery then re-install it, your phone should still be turned off at this stage. Press and hold the volume down button, then additionally press and hold the power butter, until something appears on the screen. If the bootloader appears, you can then boot into recovery from there.
If the above fails to work, report back with your results and hopefully something else will be suggested.
Ethicistabdiel said:
c:\adb
results in error: device not found.
ADB app itself is in C:\adb\platform-tools but when I try that it goes The System cannot find the path specified. I've tried cd/adb and I can get that far but I can't get to adb/platform-tools.
EDIT:
Okay, I managed to get to c:\adb\platform-tools but adb reboot recovery is still advising error: device not found. Guessing perhaps I didn't have usb debugging enabled. Are you able to suggest another work around at all? I'm happy to flash it to whatever, I don't mind losing data, just want to get it in working order again. I don't see how I can though when I seemingly don't have access to recovery or USB...hrmm, must be some way around.
Click to expand...
Click to collapse
Your only other option to get into recovery is the volume-down/power-on combination. Like I said, I can't think why that's not working unless it's related to your missing volume button (maybe it's not maintaining a constant pressure on the button when you're using whatever to press through the hole).
If you still can't get that to work, I would suggest finding a stock RUU and flashing that. It's an .exe file that runs from your PC and will return your ROM, bootloader and radio back to stock. Obviously that means you'll lose root and your custom recovery so you'll need to do all that again from scratch. There's a sticky in the dev section with a link to a thread with various RUUs (it's named something along the lines of "shipped & test ROMs" - I'll check that and link to it once I've dragged myself out of bed to the computer). You'll lose all your data, but if you took a backup beforehand you can restore that once you're back up and running.
//sent from my Desire HD using Tapatalk; all errors entirely intentional.
Yeah I'm starting to think perhaps the down button is just broken.
What state should the phone be for the RUU, turned off with usb plugged in or turned on? Bearing in mind, that when on, all it will do is the "screensaver". Will it work in either of those states?
Thanks, will deffo research more when I get home. Appreciate the help immensely.
http://forum.xda-developers.com/showthread.php?t=824357&page=5
Guessing you mean that as far as the ruu thread. Am downloading a stock rom atm, with shaped internet till tomorrow, meh! Will see how I go. Have a feeling phone was probably Vodafone branded at stock though, so that could make for extra fiddling but yeah, fingers crossed.
If you are able too install a stock-rom you can work from their than install 4EXT recovery
touch than you doen't need the volume buttons.
I downloaded the most recent stock rom on the link above. When I try to install it though, phone off or on, it advises a USB connection error. Is this likely to be because I originally had vodafone stock and need to make a gold card, or should it still at least be recognising it? It does advise not to run any programs on the phone or anything when while installing the update, but of course, as long as my phones turned on it's stuck on the damned screensaver loop.
http://forum.xda-developers.com/archive/index.php/t-841890.html
Gonna give that a go, fingers crossed!
D'oh, just found out my mobile was Three at stock and not Vodafone, the search continues .
Gah, I'm about tearing my hair out here, I want my damned phone back . Stuck using a $79 Huwawei Vodafone thing at the moment and it's so so so awful.
Anyway. I was under the impression that making a goldcard would mean I could RUU a non-Three stock rom on the phone. I made a goldcard following these instructions; http://www.addictivetips.com/mobile/how-to-make-gold-card-for-htc-desire-hd/
Then I turned the phone on as the RUU advises, (meaning it's scrolling through the feckin' "screensaver") and start the process and once again get a USB connection error.
What's the better process at this stage, try and take it back to Three stock? I don't see how I can at the moment, the only Three stock I can find seems to be rom, not RUU, meaning I'd need to load from the phone, which I can't due to no recovery. Or should I keep trying to get the goldcard thing to work, maybe try some different RUU's or something?
I'm open to any other suggestions as well. Had a bit more of a fiddle around with my volume down button, no matter what I do though, I can't get recovery mode. Always boots first to the white HTC screen and then starts the infernal "screensaver" loop.
Ethicistabdiel said:
Yeah I'm starting to think perhaps the down button is just broken.
What state should the phone be for the RUU, turned off with usb plugged in or turned on? Bearing in mind, that when on, all it will do is the "screensaver". Will it work in either of those states?
Thanks, will deffo research more when I get home. Appreciate the help immensely.
Click to expand...
Click to collapse
How come the volume down button be broken. When you were using Affinity Rom weren't you able to use your volume button for music. Remove SD card from phone then press "First - Volume down gently for 2 sec" & press-hold power button when it goes into bootload place your sd card back select option "REBOOT RECOVERY". I think your panicking too much just be patient nothing is wrong, i think your just hurrying it up...
The volume button didn't work before either. I had to manually adjust volume from settings. I thought it was just because of the dodgy plastic button on top, but using a pen to depress the button underneath doesn't work either.
Believe me, I've been trying to fix this for days now, every different way of depressing volume down in order to get to recovery has not worked. Short of taking the phone apart and seeing if I can see what's wrong with the button (doubtful with my level of expertise) then it ain't happening via that method.
Got a little bit hopeful with this;
http://www.htcdev.com/bootloader/ruu-downloads
But that too requires my phone to be in usb debugging mode, which of course, it isn't.
Is there anyway to force the phone into usb debugging mode using some form of hack or some such? The thing is, it is powered and everything, I can turn it on, the screen works and all that jazz and indeed the phone will charge from USB and the computer makes a noise when I plug or unplug it, the phone itself however won't do anything other than the "screensaver" ICS installation loop. I guess I'm thinking where there's life there's hope and perhaps there's some way in that state I can get it to switch debugging on, though I think I'm reaching at this point .
Ethicistabdiel said:
The volume button didn't work before either. I had to manually adjust volume from settings. I thought it was just because of the dodgy plastic button on top, but using a pen to depress the button underneath doesn't work either.
Believe me, I've been trying to fix this for days now, every different way of depressing volume down in order to get to recovery has not worked. Short of taking the phone apart and seeing if I can see what's wrong with the button (doubtful with my level of expertise) then it ain't happening via that method.
Got a little bit hopeful with this;
http://www.htcdev.com/bootloader/ruu-downloads
But that too requires my phone to be in usb debugging mode, which of course, it isn't.
Is there anyway to force the phone into usb debugging mode using some form of hack or some such? The thing is, it is powered and everything, I can turn it on, the screen works and all that jazz and indeed the phone will charge from USB and the computer makes a noise when I plug or unplug it, the phone itself however won't do anything other than the "screensaver" ICS installation loop. I guess I'm thinking where there's life there's hope and perhaps there's some way in that state I can get it to switch debugging on, though I think I'm reaching at this point .
Click to expand...
Click to collapse
The only option i can think of is "Fix your volume button from your nearest Service centre". Without that you cant do anything. I am Sorry....
its been like 2 months since this happened i never tried to upgrade or anything i just used to throw it around and sometimes wash it with water but still it was perfect nothing wrong then one day it stopped working and i got those 3 android guys with the skateboard at the bottom the volume button wont let me chooose any option and today for some reason i wanted to turn it on i pushed the battery in
pretty hard with no sim,sd card and it worked everything was normal so then i decided to let it charge so i turned it off and now it wont budge same as above i tried using a hair-dryer was that a miracle that happened today?
It's stuck on the white screen with the 3 androids? Select fasboot with the volume keys, press power, select reboot, press power.
If you cant scroll with the volume buttons remove the sdcard and try again.
Sent from my HTC Sensation XE with Beats Audio using xda premium
@vbhtt it is stuck on the screen no buttons work
@heavy_metal_man i tried that heaps of times i usually leave the sim and sd card out
You have to wait till it finishes scanning the sd card. It should take around a minute even if you remove the sd card
i understand but i still cant do anything after that
What happens when you try to boot normally? (remove and replace battery, press power)
it says fastboot instead of hboot but still the buttons dont work after its on
Maybe your volume buttons are faulty, do you still have you warranty?
im pretty sure there not faulty because i can get to hboot and i dont have warranty im gonna buy a new phone in a couple of weeks so i dont know what to do with it
Make a goldcard, Download your ruu, extract the rom.zip rename it to PG76IMG.zip, place it on your sd card and follow the instructions. You can ask if you want this more detailed
i want to try what you said, explain brother
Search google for how to make a goldcard.
Download an ruu from the shipped rom collection(stickied in the dev section).
Clear your temp folder (start-run-(only start if win 7)- %temp%)
run the ruu exe wait till it comes to the 1st screen where it says to accept the terms etc. (dont close it)
go back to your temp folder, search for a rom.zip (it will be buried somewhere so use the search button)
Copy it somewhere else, rename it to PG76IMG
Place it on your sd card (not in any folder) remove and replace your battery
Press and hold volume down+power
Op needs to search on how to do the things that hes requesting, the information is out there.
My HTC One M8 (Verizon) is seemingly bricked. My phone is rooted, S-Off, with the stock ROM. I have been trying to update to the latest OTA update by returning to stock. I had previously modified some entries in the Build.prop and Platform.xml. I knew those had to be default in order for the OTA to work. I had copied the original files and pasted them to my SD Card so that I could simply cut the modified versions, paste them to my SD Card, and cut the originals from my SD Card and put them in their corresponding system folders.
Upon a reboot something apparently went horribly wrong because all my phone does now is boot with the white screen and green HTC Logo, then the screen goes black. I have tried the typical Power Button + Volume Down but it won't enter the boot loader. The good news is that the USB port seems to still work for my windows computer recognizes a device connecting to it but it doesn't show up as an interactive device in windows explorer..if that makes sense.
Please Help!
SF-Echo18 said:
My HTC One M8 (Verizon) is seemingly bricked. My phone is rooted, S-Off, with the stock ROM. I have been trying to update to the latest OTA update by returning to stock. I had previously modified some entries in the Build.prop and Platform.xml. I knew those had to be default in order for the OTA to work. I had copied the original files and pasted them to my SD Card so that I could simply cut the modified versions, paste them to my SD Card, and cut the originals from my SD Card and put them in their corresponding system folders.
Upon a reboot something apparently went horribly wrong because all my phone does now is boot with the white screen and green HTC Logo, then the screen goes black. I have tried the typical Power Button + Volume Down but it won't enter the boot loader. The good news is that the USB port seems to still work for my windows computer recognizes a device connecting to it but it doesn't show up as an interactive device in windows explorer..if that makes sense.
Please Help!
Click to expand...
Click to collapse
When you connect it to the PC can you pick up the device with adb? If so, have you tried to run the command from adb to boot it into bootloader? adb devices ... if found, adb reboot bootloader
:fingers-crossed:
BerndM14 said:
When you connect it to the PC can you pick up the device with adb? If so, have you tried to run the command from adb to boot it into bootloader? adb devices ... if found, adb reboot bootloader
:fingers-crossed:
Click to expand...
Click to collapse
I'm not too familiar with ADB commands but I typed in "adb reboot recovery" and it said: "error: device not found" so even if my command was wrong it's still not detecting it. I also tried: "fastboot reboot bootloader" and it just says "waiting for device"
Also I feel like it's worth mentioning the phone is automatically rebooting every two minutes or so (haven't timed it exactly but it's a while). Still showing the green HTC Logo then the screen goes dim, then the screen turns off.
SF-Echo18 said:
I'm not too familiar with ADB commands but I typed in "adb reboot recovery" and it said: "error: device not found" so even if my command was wrong it's still not detecting it. I also tried: "fastboot reboot bootloader" and it just says "waiting on device for device"
Also I feel like it's worth mentioning the phone is automatically rebooting every two minutes or so (haven't timed it exactly but it's a while). Still showing the green HTC Logo then the screen goes dim, then the screen turns off.
Click to expand...
Click to collapse
Try holding volume UP + Power button, this simulates a "battery pull", just hold it in for a while it can take a while to "pull", when it's off try again booting into bootloader, volume DOWN + Power button.
BerndM14 said:
Try holding volume UP + Power button, this simulates a "battery pull", just hold it in for a while it can take a while to "pull", when it's off try again booting into bootloader, volume DOWN + Power button.
Click to expand...
Click to collapse
I held Volume Up + Power Button and it showed the white screen with the green HTC logo. I then released all buttons. Once the screen turned off I then held Volume Down + Power Button for two minutes straight and nothing happened.
Even though we haven't found a solution yet, I am appreciative of the help.
sounds like you never installed the htc drivers for your phone, hence your pc doesn't see the phone when you are doing ADB commands.
install the drivers for it, then try the ADB commands via your pc
and dont mess with the build prop or other system files unless you have a working back up and are 101% certain about what you are doing..
Just remember to change directory in command prompt to the folder where adb.exe is located.
I don't know why the device doesn't reboot into bootloader though when you hold volume down + power button, shouldn't have to hold it for 2minutes. Holding volume up + power button to simulate a "pull" should only take up to 20 seconds or so at most and pressing volume down + power will then immediately take you into bootloader mode, or at least it's supposed to.
Did you release the volume up / power combo when the screen went dead or before? Try holding it until the phone shuts off and then right away press volume down + power.
Sorry if I'm not answering right away though, busy eating, and will be here and away for the next hour or so while I get ready for work =o( once I leave for work I'll only be able to help some more after like 2 hours or so. Hopefully we can do something before then though =o)
wase4711 said:
sounds like you never installed the htc drivers for your phone, hence your pc doesn't see the phone when you are doing ADB commands.
install the drivers for it, then try the ADB commands via your pc
and dont mess with the build prop or other system files unless you have a working back up and are 101% certain about what you are doing..
Click to expand...
Click to collapse
You're right, I didn't install the drivers. I did so and ADB was able to recognize it and I was able to access the bootloader. Thank you everyone for your help. I won't be making the mistake again.
SF-Echo18 said:
You're right, I didn't install the drivers. I did so and ADB was able to recognize it and I was able to access the bootloader. Thank you everyone for your help. I won't be making the mistake again.
Click to expand...
Click to collapse
So you'll be able to fix it from here on then? I was just about to link this thread to you as well should you have gotten adb to work again, it's for the RUU for Verizon seeing as you said you're on Verizon.
But going by your response up there you might already know how to fix this issue further :good:
BerndM14 said:
So you'll be able to fix it from here on then? I was just about to link this thread to you as well should you have gotten adb to work again, it's for the RUU for Verizon seeing as you said you're on Verizon.
But going by your response up there you might already know how to fix this issue further :good:
Click to expand...
Click to collapse
Indeed I appreciate it, but I just finished installing the RUU ha. Hopefully this thread will be of use to someone in a similar circumstance in the future.
Share another method of getting into recovery mode on non-responsive blank screen
Hi,
I just want to share how I accessed recovery mode with the same build.prop issue but with S-ON (might work with S-Off too).
I found the solution from here:
http://forum.xda-developers.com/htc...ter-download-mode-t2853100/page2#post62490577
To get into recovery mode on a non-responsive blank screen, hold the power button and volume up button at the same time and then approximately after 10 seconds, switch from pressing the volume up to volume down button before the HTC logo white screen shows while still holding down the power button. After, a white boot screen will give an option to go into recovery mode.