Related
so i want to change again my rom again but now i have a lot of things on my phone that important to me
so i would like to use titanium backup but im not quit sure how to use properly
so can somebody explain to me how do i backup everything
and when i mean everything i mean like saves from games and sms and music and pictures and more
so please i need your help
thanks
Using Titanium Backup:
1. Menu -> Batch -> Select RUN Backup all user apps + System data
2. The backup will be in the folder on ur SD card. Copy and save it in case u earse the entire SD card
Using Recovery:
To backup enitre ROM which ever you are currently using. Reboot into recovery..
Currently I use Clockword Mod, so I know how to do it only by this one
1. Reboot into recovery mode.
2.Under Backup & Restore do the nandroid Backup which backsup the currently using ROM with data.
3. This will also be under the folder ClockwordMod in ur SD card backit up in case u do SD card formatting
For SMS, Call Logs & Pictures I use McAfee Wavesecure which I bought long back and backsup all the data.. not sure about Titanium backup for SMS & stuff...
I think this might help you.
Excuse a newbie question, but doesn't the nandroid recovery just take a snapshot of the current setup with ROM and all?
How do you use it with a new ROM?
Sent from my HTC Desire using XDA Premium App
You use the nandroid if the new rom doesnt work or you of some other reason want to go back to the old rom.
aswinarun said:
Using Titanium Backup:
1. Menu -> Batch -> Select RUN Backup all user apps + System data
Click to expand...
Click to collapse
Don't backup System Data if you are changing from one ROM to another, you will invariably get problems backing up system files that won't work smoothly with the new ROM. Just backup user apps.
Kalavere said:
Don't backup System Data if you are changing from one ROM to another, you will invariably get problems backing up system files that won't work smoothly with the new ROM. Just backup user apps.
Click to expand...
Click to collapse
Hi,if i backup system data but do not restore them..will it still conflict?
JxXxn said:
Hi,if i backup system data but do not restore them..will it still conflict?
Click to expand...
Click to collapse
No, that's fine. You can back both up and just restore apps and app data with no problem. I've never backed up system data I really don't see the point, I guess you could backup and restore to the same ROM, but i'd rather just start afresh each time.
Kalavere said:
Just backup user apps.
Click to expand...
Click to collapse
I couldn't agree more with this.
Sent from my HTC Desire using Tapatalk
Being able to backup system data selectively isn't a bad idea, i.e. Wi-Fi access points and literally one or two other things, if someone is after a system backup this is where nandroid comes into play, in my opinion.
I do agree backup for user apps. Also I would prefer Nandroid to restore the old ROM fully. Since I have been using some CM7 RC builds & also nightly builds.. i started to restore system data as well, which literally helps me to have all settings as well.
Also he can run Restore apps with data alone...
But it is upto OP which method he prefers..
Kalavere said:
Being able to backup system data selectively isn't a bad idea, i.e. Wi-Fi access points and literally one or two other things, if someone is after a system backup this is where nandroid comes into play, in my opinion.
Click to expand...
Click to collapse
This is for sure, things like bookmarks, user dictionary, wifi are nice to be able to just restore.
Sent from my HTC Desire using XDA Premium App
mistaliu said:
This is for sure, things like bookmarks, user dictionary, wifi are nice to be able to just restore.
Click to expand...
Click to collapse
I may have gotten confused....
is there a method to selectively backup / restore bookmarks and wifi (wep/wpa passphrases) ?
fred_be9300 said:
I may have gotten confused....
is there a method to selectively backup / restore bookmarks and wifi (wep/wpa passphrases) ?
Click to expand...
Click to collapse
Open the app and select Backup/Restore and long press on the system data you want to backup. You should exercise caution and not backup system data that will potentially disrupt another ROM. Wi-Fi Access Points, User Dictionary etc can all be found in there. Hope this helps.
Kalavere said:
Open the app and select Backup/Restore and long press on the system data you want to backup. You should exercise caution and not backup system data that will potentially disrupt another ROM. Wi-Fi Access Points, User Dictionary etc can all be found in there. Hope this helps.
Click to expand...
Click to collapse
Or the way I did it was just go under the backup/restore tab and scroll till you find what you want to backup ie. Bookmarks, wifi, etc then you are just backing up what you want and need
Sent from my HTC Desire using XDA Premium App
I have a question regarding Titanium that I hope you can help with...
I've just upgraded to the Gingerbread RUU, so I lost root and can't get it back, or frankly want to have it back, but I've backed up a number of apps with Titanium Backup, and is there any way to reinstall them?
They're all saved to my SD card, and Titanium Backup obviously refuses to work.
I can't and don't want to get root back, so is there any way to manually use these backups, or use them with another program?
vszulc said:
I have a question regarding Titanium that I hope you can help with...
I've just upgraded to the Gingerbread RUU, so I lost root and can't get it back, or frankly want to have it back, but I've backed up a number of apps with Titanium Backup, and is there any way to reinstall them?
They're all saved to my SD card, and Titanium Backup obviously refuses to work.
I can't and don't want to get root back, so is there any way to manually use these backups, or use them with another program?
Click to expand...
Click to collapse
You can recover the apps by searching the TitanuimBackup folder and extracting the APKs from the Zip files. It's obviously not possible to recover the data as it's zipped up in a tarball and it requires Superuser rights to access if using Titanium, however I don't know that it's not possible to manually replace the data. If you unzip the tarball and extract the folder to your desktop. If it's the BBC News app for example the folder should look like this after you extract it.
'Data/Data/bbc.mobile.news.uk/cache
-----------------------------------/databases
-----------------------------------/files
-----------------------------------/shared_prefs'
I don't know if you can access Data/Data from the phones internal memory without root, I am using Root Explorer. Try with Astro, I am guessing you can read/write to Data/Data without having S-Off as I am not getting prompted to switch to R/W to delete files (I have Root and S-Off).
If you can read and write to Data/Data without root and S-Off you can manually copy and paste the data over after installing the app, it will take ages to do if you've got any number of apps and I am not ever sure it will work, but I suppose it's worth a go.
I hope this makes sense, it makes semi sense to me as I read it back!
can someone help me?
the wonder is my first android and I wanted to learn while before hacking on it ...
last night I did the root and installed ClockworkMod 6.0.1.2 to make a nandroid before flashing a ICS rom.
but I have come some doubts:
1) the nandroid with clockworkmod is done either on internal mem on external sd right? I tried with the internal memory and I did a backup of 17MB ... I have copied to the PC the folder ClockworkMod always 17MB: they seemed to me just a few for a nandroid backup... I did it again ... the same ...
2) then I added the external sd and I deleted the two previous backups from internal mem and redid the backup to external sd ... the process took about twenty minutes (slower then before), and in fact has made a backup of 790mb
3) I try to copy the backup on the PC with the phone attached but it don't work .... I removed the SD card and copied the folder on pc with win7: I did not copy some files because they are "too long" (???)... then I tried to copy it on a pc with ubuntu and makes the copy but when the transfer is finished tells me that the number of files copied is right but instead of 790mb is only 725mb: I need to trust this backup? ?? better to delete and redo everything? I do not want to flash something and do not have a working nandroid...
another question: when I flash a rom and do ALL wipe the sd external is reset? no I think, right? and to put on the contacts and messages and the settings I use those saved using kies or do I need to do a better titanium backup or save contacts synced to gmail?
sorry for the many questions but as I'm a true noob and before I do damage I want to have in mind what I was doing
I'm waiting your reply before flash a rom... thanks
bennymax said:
can someone help me?
the wonder is my first android and I wanted to learn while before hacking on it ...
last night I did the root and installed ClockworkMod 6.0.1.2 to make a nandroid before flashing a ICS rom.
but I have come some doubts:
1) the nandroid with clockworkmod is done either on internal mem on external sd right? I tried with the internal memory and I did a backup of 17MB ... I have copied to the PC the folder ClockworkMod always 17MB: they seemed to me just a few for a nandroid backup... I did it again ... the same ...
2) then I added the external sd and I deleted the two previous backups from internal mem and redid the backup to external sd ... the process took about twenty minutes (slower then before), and in fact has made a backup of 790mb
3) I try to copy the backup on the PC with the phone attached but it don't work .... I removed the SD card and copied the folder on pc with win7: I did not copy some files because they are "too long" (???)... then I tried to copy it on a pc with ubuntu and makes the copy but when the transfer is finished tells me that the number of files copied is right but instead of 790mb is only 725mb: I need to trust this backup? ?? better to delete and redo everything? I do not want to flash something and do not have a working nandroid...
another question: when I flash a rom and do ALL wipe the sd external is reset? no I think, right? and to put on the contacts and messages and the settings I use those saved using kies or do I need to do a better titanium backup or save contacts synced to gmail?
sorry for the many questions but as I'm a true noob and before I do damage I want to have in mind what I was doing
I'm waiting your reply before flash a rom... thanks
Click to expand...
Click to collapse
First thing: Why do you need to copy the backup to your PC? I can certainly assure you that the backup is working fine. Just leave your SD card within your device upon backing up. And just leave it there. If you ever really wanted to copy the backup to your pc, well don't get the file size(s) wrong. They will certainly be different since the systems you are trying to copy the files to uses a different file system. So it's normal for them to have different file sizes. To add to that, the CWM uses generated MD5 to confirm that the backup (it's related files) are correct before it will restore a certain backup. If something is wrong or the backup got corrupted, CWM will not continue in restoring it.
Second: when you flash, your personal files in your sd card will remain intact. Flashing (may) be only wiping an SD-EXT if you created such partition in your card since apps uses this. So don't worry.
For most customized ROM, I'm afraid components regarding the communication of your device and Kies won't be integrated since devs prefer your system to be our of bloats as possible. So upon flashing a custom ROM, you might not be able to use Kies anymore. In flashing, internal data such as contacts, messages, APN, wifi(s), etc. will be erased as the system will be erased. So;
For your contacts: Sync it with Google or export them to our SD for later import.
For your APN and messages: There's an app in the Play Store that allows you to backup and restore them.
The titanium backup is a very good tool too. Use it.
Thread moved
The [Q] in your thread title should have been reason enough to post it in Q&A .
Please don't post Questions in General Section in the future.
bbmadzky said:
First thing: Why do you need to copy the backup to your PC? I can certainly assure you that the backup is working fine. Just leave your SD card within your device upon backing up. And just leave it there. If you ever really wanted to copy the backup to your pc, well don't get the file size(s) wrong. They will certainly be different since the systems you are trying to copy the files to uses a different file system. So it's normal for them to have different file sizes. To add to that, the CWM uses generated MD5 to confirm that the backup (it's related files) are correct before it will restore a certain backup. If something is wrong or the backup got corrupted, CWM will not continue in restoring it.
Second: when you flash, your personal files in your sd card will remain intact. Flashing (may) be only wiping an SD-EXT if you created such partition in your card since apps uses this. So don't worry.
For most customized ROM, I'm afraid components regarding the communication of your device and Kies won't be integrated since devs prefer your system to be our of bloats as possible. So upon flashing a custom ROM, you might not be able to use Kies anymore. In flashing, internal data such as contacts, messages, APN, wifi(s), etc. will be erased as the system will be erased. So;
For your contacts: Sync it with Google or export them to our SD for later import.
For your APN and messages: There's an app in the Play Store that allows you to backup and restore them.
The titanium backup is a very good tool too. Use it.
Click to expand...
Click to collapse
thanks a lot bbmadzky, I understand what you say
I wanna copy backup in my pc to have a secure place where put the first nandroid of my wonder with stock rom as I have bougth it external sd can be corrupted or deleted and have a genuine nandroid of my phone I think is better
just do another backup to ha the certainty to have a good backup and now can I try to flash my first costomized rom
thanks a lot dude
ciao
It's been a pleasure in helping you with your doubt. Happy flashing and don't ever forget to do a nandroid backup.
Sent from my GT-I8150 using Tapatalk 2
This reply may be too late in coming...but I'll post it anyway. First, the size of your created nandroid....17mb.....WAY too small....the size of the backup I made was +/-800mb.
Second....if you REALLY have to copy it to a PC, zip it with minimal compression first....I found from personal experience that it copies MUCH more easily and safely....
Finally, keeping personal data (contacts, SMS, lists of installed apps [not including app data]) safe. You can install apps that will make data files of your texts and installed apps that can be accessed after flashing a custom ROM to enable recovery and re installation, and for your contacts (if you store them on the phone instead of the sim card) you go to your contacts, press the menu button and select import/export, then export to SD card. If you use these apps (appbak and SMS backup and restore) and the export to SD card function on your phone, you will find that data files have been created by using them.....these data files MUST be moved to your EXTERNAL SD card BEFORE flashing your custom ROM. They will be perfectly safe there as long as you haven't played around with the storage configurations on your phone....which I don't believe is possible with a stock ROM anyway....
Good luck and happy flashing
Hope this has helped....if it has, click thanks
Sent from my GT-I8150 using xda app-developers app
not so late dude
the problem is... I don't have a working backup still now!
I just flased cm9 and RemICS 1.5 rom and every time I tried to make a backup before flashing...
the first time I have the above doubt (as you can read above)
the second time I've tried to install CWM 6.0.1.0 instead 6.0.1.2 and the backup process is finish well (or it was what I belive ) then when I try to comeback to stock version an error has occurred in restore and I must re-do a flash with stock firmware because the SGW was freezed.
I don't know if there are problems with installation of CWM, the release of CWM (now I try with a CWM 5.5.0.4), with the type of backup files (n CWM6 you can choose the type of format file do you have from the backup process) but now before to flash another rom I want to have a WORKING nandroid!
thanks for your reply and your suggests too... maybe make I something wrong but I follow the tools on web and these are simple... maybe is only bad luck... I retry
Dude...if you read my thread here.......
http://forum.xda-developers.com/showthread.php?t=1846449
And specifically the replies posted by IvanKurnia, you'll find the links (and installation method) for the version of CWM that I'm using.....with success. When you make your nandroid backup, you need to make sure you have enough space for it to complete as you don't get any warning about lack of memory....the backup process will simply stop....and unless you know what to look for, you may not realise.
I'm not totally sure if flashing different versions of CWM on top of each other will cause instability or not....maybe somebody else can answer that one.....
I'd advise getting as much info as you can about EVERYTHING! before you make any more modifications to your phone.....read as many threads and ask as many questions as it takes.....most members of this community will be happy to help (though there are one or two who have a superiority complex...lol)....it's better to ask a hundred questions and get it right, than to ask none and turn your phone into an expensive paperweight.......
CM9...I don't HAVE to.....I just.....can..
first of all: I wanted to write mate not dude sorry for my bad english...
thanks keithross
I read your thread and all the replies in it...
yes the metheod for flashing the CWM is the same I knew. I prefer to flash it whit odin.
I don't think I have problems flashing other versione because I must do a replace of stock firmware before: I set the cell in the status as new... then I reflash on it the CWM.
the only thing I don't have made is to set on USB debugging ON... uhmmm maybe is this the problem?
I try now to flash, make a nandroid, try recovery by nandroid to understand if nandroid works! If not... I try to instal CWM witn the method has showed by ivankurnia
for free space I have enough space in my SD ext card (3gb ca.) and not so many app installed... and yes I use often forum and I think these are the greatest resource on the web xda for android is "the bible" I think so!
p.s. your thread has so many informations I need...
Hi Bennymax, I found ivankurnias method the easiest to use....I'd tried ODIN without success....but successfully installed CWM on the first try with the terminal emulator/busybox method.....others have successfully used this method too. I do still stand by my concerns about flashing different versions of CWM on top of each other as I've come to believe that the recovery partition is separate to the ROM partition and that changing the ROM partition has no effect on the contents of the recovery partition. I hope I'm wrong about that, and that the issues you are having with nandroid backup and restore are as you say bad luck....but I'm not convinced.....having said that, I'm not a developer, and I could be wrong. I feel that it is something that needs researching just in case the luck you've had is not bad, but good in so far as you haven't bricked your phone yet......
Anyway, good luck however you decide to proceed....
Keith
CM9...I don't HAVE to.....I just.....can..
Hi all - I freaking love these forums, you guys are awesome. What a great community here.
I searched the forums for a walkthru of setting up a new phone from the old one; if it's here somewhere and I missed it, feel free to just point me to it and I'll manage it from there.
So I'm just getting my new AT&T GS III probably today, replacing my stone-age Captivate. I've done a BIT of hack work on the Captivate, it's rooted etc with firmware v2.2, build Froyo.UCJI6. I've got Titanium Backup Pro v5.7.3 running currently. My question is regarding backing up and restoring my settings, market purchases, contacts, saved games (important!!), etc onto my new S III.
For backing up, is it simply a matter of running the batch "backup of all user apps + system data" on the Captivate (which I do weekly), then copying over all the backup files to my removable SD? As long as I run a backup of all apps/data so I just take the files with today's mod date? If I need them all, is there any easy way to batch copy ALL of the files to my SD rather than taking a half-hour to select/deselect the files I need on my tiny Captivate screen?
My bigger concern is that the restoration goes OK on the S III, as they have different versions of the OS. In the Titanium prefs, there are a TON of settings so I'm don't know what I need to focus on or if it's all set to 'auto-pilot' restore on a new phone. I assume I have to first root and then install Titanium on my new phone, just not sure what to do from there? (BTW, can I do a fully-functional restore on the free version of Titanium with my paid version backups? Or do I need to purchase it again on my new phone?)
Thanks in advance, I LOVE this place!!
Tom
teebob2000 said:
Hi all - I freaking love these forums, you guys are awesome. What a great community here.
I searched the forums for a walkthru of setting up a new phone from the old one; if it's here somewhere and I missed it, feel free to just point me to it and I'll manage it from there.
So I'm just getting my new AT&T GS III probably today, replacing my stone-age Captivate. I've done a BIT of hack work on the Captivate, it's rooted etc with firmware v2.2, build Froyo.UCJI6. I've got Titanium Backup Pro v5.7.3 running currently. My question is regarding backing up and restoring my settings, market purchases, contacts, saved games (important!!), etc onto my new S III.
For backing up, is it simply a matter of running the batch "backup of all user apps + system data" on the Captivate (which I do weekly), then copying over all the backup files to my removable SD? As long as I run a backup of all apps/data so I just take the files with today's mod date? If I need them all, is there any easy way to batch copy ALL of the files to my SD rather than taking a half-hour to select/deselect the files I need on my tiny Captivate screen?
My bigger concern is that the restoration goes OK on the S III, as they have different versions of the OS. In the Titanium prefs, there are a TON of settings so I'm don't know what I need to focus on or if it's all set to 'auto-pilot' restore on a new phone. I assume I have to first root and then install Titanium on my new phone, just not sure what to do from there? (BTW, can I do a fully-functional restore on the free version of Titanium with my paid version backups? Or do I need to purchase it again on my new phone?)
Thanks in advance, I LOVE this place!!
Tom
Click to expand...
Click to collapse
I did the whole transfer-of-backups process when I got my current device, migrating over from an even more ancient device than your Captivate.
For the backup process, you could fairly easily tell TiBu to use the SD card for its backup storage - that would probably be the easiest way to get the backups in the right place for the move. Other than that, you could, for example, use ADB to pull the backups off of your phone, use one of the cloud storage services that TiBu Pro supports, or find a file manager app that lets you select everything readily (or even just the TiBu folder - one folder isn't that much of a stretch to move) and move it over to the card.
For the restore process, you want to be careful with exactly which system data settings you choose to restore, as - especially across major Android versions and across devices - restoring many of them will just confuse your device as opposed to doing anything useful. Most of the important things - such as your contacts (assuming you have it set to do that, which is the case by default) and market account purchases - aren't stored on the device, but associated with your Google account, so just logging back in with your account on the new phone will restore a lot of that information easily; in particular, this makes it extremely easy for TiBu to find its licence again (once it's on your device).
Hope that's of help
Don't backup system data with titanium, just the apps. I've had some luck backing up sms and WiFi passwords with titanium and restoring them on different roms, though you should use the xml backups (colored in yellow). Your contacts and market purchases should already be synced with your Google account, so if you use the same account on the new phone all of that data will follow.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
smelenchuk said:
For the restore process, you want to be careful with exactly which system data settings you choose to restore, as - especially across major Android versions and across devices - restoring many of them will just confuse your device as opposed to doing anything useful. Most of the important things - such as your contacts (assuming you have it set to do that, which is the case by default) and market account purchases - aren't stored on the device, but associated with your Google account, so just logging back in with your account on the new phone will restore a lot of that information easily; in particular, this makes it extremely easy for TiBu to find its licence again (once it's on your device).
Click to expand...
Click to collapse
Thanks for the reply! Do I at some point in the backup or restore process have the option for which system settings are restored?
Also, I'm not sure my contacts are backed up online, is that with my gmail account? I don't think I ever explicitly set that up but I do check gmail on my phone. How can I tell whether it's linked up and already backed up online?
Thanks!
You can check your saved contacts here:
https://www.google.com/contacts/#contacts
When you select to restore in tb you will be given a list of apps/settings to restore. Un check any items that you don't want to restore before confirming the operation.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Before I restore my Titanium backup to the new phone, do I have to have all the apps that have backed up data already installed on the new phone?
Hi All,
Been trying to figure this out for the last 30 Hours straight & now I'm at the end of my rag with bloody knuckles & a hole in my desk... So I thought this would be a good a time as any to ask for some advice/help!
I have upgraded/flashed my HTC One M8 (2014) from LP (Android_Revolution_HD-One_M8_41.0_866186) to MM (ResurrectionRemix-M-v5.6.2-20160203-m8) (Based off CM13). I created a backup of all my Apps & Data using Titanium Backup & also made a full Nandroid backup using TWRP.
The problem is with restoring the data within the Nandroid backup, previously I have used the "Extract Data From Nandroid Backup" option in Titanium Backup to extract my SMS/MMS messages to my new Rom. However when I try to do that on MM I'm greeted with the message "Failed to locate your TWRP backups directory. Please verify that the "TWRP/BACKUPS" folder exists on your SD card."
To make thing worse, when I try to restore my Nandroid backup, it all goes well except my WiFi & Mobile Data no longer work... I can connect to my WiFi but it always says that there is no internet connection. So restoring is not an option as I can't do much without internet access.
Anyone have any ideas? I have tried to use a different SD Card & no joy, could it maybe be a permissions issue or something or am I just being a muppet & missing a simple solution.
Either way any advice would be much appreciated. Thanks.
Oh yeah, I Googled the message that Titanium brings up with quotation marks & there were only TWO results (both from the same thread on XDA)... I've never seen Google look so barren!
Hi - I'm having a similar issue. Upgraded from LP to MM and can't extract apps/data from Nandroid backup...
It says it's been successful but no apps are there...
NeoSonic said:
Hi All,
Been trying to figure this out for the last 30 Hours straight & now I'm at the end of my rag with bloody knuckles & a hole in my desk... So I thought this would be a good a time as any to ask for some advice/help!
I have upgraded/flashed my HTC One M8 (2014) from LP (Android_Revolution_HD-One_M8_41.0_866186) to MM (ResurrectionRemix-M-v5.6.2-20160203-m8) (Based off CM13). I created a backup of all my Apps & Data using Titanium Backup & also made a full Nandroid backup using TWRP.
The problem is with restoring the data within the Nandroid backup, previously I have used the "Extract Data From Nandroid Backup" option in Titanium Backup to extract my SMS/MMS messages to my new Rom. However when I try to do that on MM I'm greeted with the message "Failed to locate your TWRP backups directory. Please verify that the "TWRP/BACKUPS" folder exists on your SD card."
To make thing worse, when I try to restore my Nandroid backup, it all goes well except my WiFi & Mobile Data no longer work... I can connect to my WiFi but it always says that there is no internet connection. So restoring is not an option as I can't do much without internet access.
Anyone have any ideas? I have tried to use a different SD Card & no joy, could it maybe be a permissions issue or something or am I just being a muppet & missing a simple solution.
Either way any advice would be much appreciated. Thanks.
Oh yeah, I Googled the message that Titanium brings up with quotation marks & there were only TWO results (both from the same thread on XDA)... I've never seen Google look so barren!
Click to expand...
Click to collapse
Is your TWRP backup folder on the external sdcard? If so, did you give Titanium access? There's multiple thread about apps needing to be given permission to access external storage. Titanium Backup especially has a lot of threads detailing this because of steps needed to access your backup folder if it is on the external sdcard.
topjohnwu said:
Q: **** app cannot access external SDcard!!
A: Look at this explanation:
Since Kitkat (2 years ago man), we don't have direct external storage write permission. Google consider it insecure, so they implemented this feature. The reason why you can access external SDcard easily before is because most roms on XDA already contains a hack in /system/etc/permissions/platform.xml. You should not rely on this hack forever, please take a look below.
In lollipop and after, Google provided a much secure and better way to grant external storage access to third party apps, first of all take a look at this article for details:
http://www.androidpolice.com/2014/1...s-automatic-mediastore-and-improves-security/
So instead of using the old platform.xml hack in the old Kitkat days, adopt yourself with this new behavior of Android!! If a certain app cannot access SDcard, ASK THE DEVELOPER to add support for this API!!
Many apps already have support for this API. I'll take Titanium Backup for example, as lots of you cannot find the way to use it on externals SD. In Menu>>Preferences>>Backup Location, you can choose Document Provider on top of the detect button.
In the provider, open the menu on the top right corner and select "Show SDcard", then you'll see External Storage in the left side. Select external SDcard in the document provider and press the button on the bottom, the app will then be granted access to the whole external storage. You can then create a new folder in TiBack and select it as your backup location.
Other apps also follows the instructions above, you just have to manually set up the folder where the app can access, in the case which most of us would love to give access to the whole SDcard, I set the location to the root of external storage. Each app has independent permission, so you have to manually grant each app you wish to access external storage.
Click to expand...
Click to collapse
-Duir- said:
Is your TWRP backup folder on the external sdcard? If so, did you give Titanium access? There's multiple thread about apps needing to be given permission to access external storage. Titanium Backup especially has a lot of threads detailing this because of steps needed to access your backup folder if it is on the external sdcard.
Click to expand...
Click to collapse
'allo mate, I appreciate the reply but it has done nothing for me, just to clarify, I can see my backed up Apps & Data so I'm pretty sure it already has access to the SD card (correct me if I'm wrong) but it is still unable to see the Nandroid TWRP backup... bit of a Jar as I just paid for the premium version of Titanium Backup & Nandroid Manager. Nandroid Manager is able to see the files but hangs when trying to extract the Messages...
Any Ideas?
NeoSonic said:
'allo mate, I appreciate the reply but it has done nothing for me, just to clarify, I can see my backed up Apps & Data so I'm pretty sure it already has access to the SD card (correct me if I'm wrong) but it is still unable to see the Nandroid TWRP backup... bit of a Jar as I just paid for the premium version of Titanium Backup & Nandroid Manager. Nandroid Manager is able to see the files but hangs when trying to extract the Messages...
Any Ideas?
Click to expand...
Click to collapse
Copy or move the backup folder to internal storage and it will work. Not sure if it's a bug in TB or because of how MM handles the external sdcard but it doesn't check it. It finds the TWRP folder on internal, which if you don't backup on internal, only has your preferences (and theme if you use one). I never used it, so not sure if it was an issue before MM or not.
I did try and got an error about not finding a "clockworkmod/backup" folder or a "TWRP/Backups" folder so to see what happened I made a "Backups" folder in the TWRP directory on my internal storage and the error basically changed to say there were no backups in it.
-Duir- said:
Copy or move the backup folder to internal storage and it will work. Not sure if it's a bug in TB or because of how MM handles the external sdcard but it doesn't check it. It finds the TWRP folder on internal, which if you don't backup on internal, only has your preferences (and theme if you use one). I never used it, so not sure if it was an issue before MM or not.
I did try and got an error about not finding a "clockworkmod/backup" folder or a "TWRP/Backups" folder so to see what happened I made a "Backups" folder in the TWRP directory on my internal storage and the error basically changed to say there were no backups in it.
Click to expand...
Click to collapse
Cheers for that mate, seems to have done the trick. Unfortunately when I restore my Phone & Messaging data it completely destroys my phone... I get the message "com.android.phone" has stopped working & the entire system slows down to a crawl... I also get the Sim Card icon in the top right of the screen with a line through it... Is this because I'm moving between Sense to something else? I'm really at my wits end with this.
Any advice would be much appreciated.
NeoSonic said:
Cheers for that mate, seems to have done the trick. Unfortunately when I restore my Phone & Messaging data it completely destroys my phone... I get the message "com.android.phone" has stopped working & the entire system slows down to a crawl... I also get the Sim Card icon in the top right of the screen with a line through it... Is this because I'm moving between Sense to something else? I'm really at my wits end with this.
Any advice would be much appreciated.
Click to expand...
Click to collapse
I would say that's definitely it. Not only are you restoring app data for system apps from two different Android versions (LP -> MM) which can be buggy, but also for two completely different builds (Sense -> CM) which don't use the same apps. Sense will use HTC's own Phone and Messaging apps and CM if I remember uses stock Android versions). It's been too long since I tried CM but when I did it I had a third-party program for backing up contacts and installed something like GoSMS to backup messages, then installed the same apps on CM and restored the data from within those apps and the stock dialer/messaging apps had the data. But this was before HTC added backup/restore capability into their versions of the apps.
I'm having a similar issue, I google searched and it brought me here. I can see my backup from within TWRP, even on the PC I can see the TWRP folder and files. But when I boot and use titanium backup or nandroid manager, it says backup not found. Even in the root browser, the TWRP folder is empty and even on the PC I can't see the files anymore. Its kind of frustrating because there are two apps that I want restored but I don't want to completly restore using TWRP.
rapiollymega said:
I'm having a similar issue, I google searched and it brought me here. I can see my backup from within TWRP, even on the PC I can see the TWRP folder and files. But when I boot and use titanium backup or nandroid manager, it says backup not found. Even in the root browser, the TWRP folder is empty and even on the PC I can't see the files anymore. Its kind of frustrating because there are two apps that I want restored but I don't want to completly restore using TWRP.
Click to expand...
Click to collapse
Try going to Settings>Apps, find Titanium Backup, then select Permissions and see if Storage is toggled on.
I've got the same problem, storage permission is toggled on. Although I am using a LG G3
same here with my Galaxy S5 (AOKP 6.0.1)
The same problem on Xiaomi Mi Max (Android 6.0.1). External SD card permission is granted to TB (it can see full SD contents and select TWRP backup directories). But "extract from Nandroid backup" shows "folder not found" error.
I'm afraid CWM/TWRP directory locations are hardcoded as "/TWRP on SD card" while /sdcard is mapped to internal memory on modern phones.
I had copied data files of the backup (1.5 gigs, not a best choice) to internal memory (/sdcard) and TB immediately found them. Unfortunately, TB offers only apps and app data for restoration. I need to extract plain user data directories but TB offers no way for that.
Stock S5 6.0.1
same here...what a pain..
Had to copy nandroid backup from extsd to internal storage to restore app data
-Duir- said:
Is your TWRP backup folder on the external sdcard? If so, did you give Titanium access? There's multiple thread about apps needing to be given permission to access external storage. Titanium Backup especially has a lot of threads detailing this because of steps needed to access your backup folder if it is on the external sdcard.
Click to expand...
Click to collapse
DAMN THANK YOU that solved it
Anyone knows how to extract the nandroidbackup from the TWRP folder on ExternalStorage? I cannot move the backup because its to large for my InternalStorage. I think it's an issue in TiBackup, creating a symbolic link also does not work since my ExternalStorage is formatted as exFAT.
Another fix I discovered is get your BACKUP ID
twrp save folder > TWRP>BACKUPS>BACKUPID>backup
if you have a backup without a backupid folder it will not work!
Having storage permission or not doesn't seem to help at all!
-Duir- said:
Is your TWRP backup folder on the external sdcard? If so, did you give Titanium access? There's multiple thread about apps needing to be given permission to access external storage. Titanium Backup especially has a lot of threads detailing this because of steps needed to access your backup folder if it is on the external sdcard.
Click to expand...
Click to collapse
This helps Titanium Backup see its own backup folder, but doesn't help it see the /TWRP/BACKUPS folder
emuzychenko said:
I'm afraid CWM/TWRP directory locations are hardcoded as "/TWRP on SD card" while /sdcard is mapped to internal memory on modern phones.
Click to expand...
Click to collapse
Can a symlink be created from the location it's looking to the location it's actually at?
I'm trying to backup all of the Torque Realtime screens because of the time it takes to make them but it's not working! Does Titanium Pro really backup "User Data" which I would assume that these screens would be??
Someone here has to have done this if they have these 2 apks and backed Torque up using Titanium Pro! Any help much appreciated. It must be in one of the Backup or Restore settings but I can't figure out which one!
In the Preferences of Titanium, tap on Backup settings, and put a tick in the Backup app cache box. Make sure the folder you're saving the backup files to is empty, and then do a backup, but just the Torque app. only.
You then copy that entire folder with what Titanium has saved for Torque to your new device, install Titanium Pro on it, go into Preferences, Restoration settings, and ensure a Tick in the box next to Migrate system data. Then, restore the app. and it should come back the way you had it on your donor device.
@djshotty , very much appreciate your response. Am trying your method now but need to know which 'batch actions' to 'restore' listing to use. I've been using "Backup all user apps" to backup and I've been using "Restore all apps with data" and then 'Deselecting all' and only selecting Torque and then do the Restore. Where, except what you mentioned, have I been doing wrong???
Just finished testing and still the same problem. I did a backup, ticking places you mentioned using a new empty folder, and then did a restore(of Torque only). It looked the same....BUT I next erased one of the PIDs on one of the screens. Then without doing another backup, I restored that same backup and what I erased is now gone. In other words, the backup should have restored the screen the way it was backed up!...must be another 'tick box' that I have ticked or don't have ticked that needs to be. One other thing, I don't have any scheduled backups set so they don't change my testing while trying to find what the problem is. Thanks for helping!
On the Batch actions - ALL screen, Run the Backup all user apps + system data, then Deselect All, scroll down to find Torque, put a tick in the box, tap the green tick at the top right of screen and back it up.
djshotty said:
On the Batch actions - ALL screen, Run the Backup all user apps + system data, then Deselect All, scroll down to find Torque, put a tick in the box, tap the green tick at the top right of screen and back it up.
Click to expand...
Click to collapse
@djshotty apparently you aren't reading my post correctly. I have backed up Torque and stated in my post. I am not trying to migrate my settings to another unit as you mentioned. Titanium Pro should never change a backup once its been backed up. That's why one can do multiple backups. If I make a mistake and delete an app that's been backed up, Titanium can restore it. Why you are getting defensive? I have said nothing but that I have followed your instructions and they did not work. Titanium is not restoring my backup as it was when I backed it(Torque) up. Proof: I backup Torque and then make a change to Torque. I then restore Torque and the changes that I made are in the backup that gets restored!!! And that's without doing another BackUP...just Restore.
I'm just asking for help from anyone that uses Titanium Pro that can guide me to where in the settings that must be wrong to cause my problem. Thanks again for attempting to help!
djshotty said:
Mod edit: garbage removed from quote
Click to expand...
Click to collapse
I almost peed my pants after reading this...lol
If the steps outlined are not working something must be wrong with the application installed, or a pebkac error... I too have used TB for years since since the HTC Incredible came out and have never had a problem when following these same steps. I have never known TB to change a previously created backup.
matt1981m said:
I almost peed my pants after reading this...lol
If the steps outlined are not working something must be wrong with the application installed, or a pebkac error... I too have used TB for years since since the HTC Incredible came out and have never had a problem when following these same steps. I have never known TB to change a previously created backup.
Click to expand...
Click to collapse
@matt1981m, instead of peeing in your pants, why don't you attempt what I have posted and then post that it works for you!!!!!!!!!!!!!!!!!!!!!! Its obviously changing my backup. If you use Torque, make a backup, go back into Torque and just change one easy PID on one of the screens by deleting the PID, and then restore your backup just for Torque and see if that PID is really still there where it was. Then post your reply! I'm not saying that Titanium Pro has the problem, I'm trying to find out why and how to fix my problem with Titanium's backup! I thought this site was for members to get help and to offer help to those that need it instead of making derogatory remarks about someone's problems with any app. If you check most of my post, you will find that I attempt to help others instead of criticizing them...
I apologize if you felt I was criticizing you. That was not my intention. I have torque pro installed and configured on my HU. I haven't had any issues, and I haven't specifically tried modifying the PID as you have mentioned, but I have used TB to restore settings for Torque Pro. I will be installing a SoM upgrade to a RK3188 in a couple days, depending on USPS, and I will update this thread at that time to share what results I have with the current versions of both apps.
matt1981m said:
I apologize if you felt I was criticizing you. That was not my intention. I have torque pro installed and configured on my HU. I haven't had any issues, and I haven't specifically tried modifying the PID as you have mentioned, but I have used TB to restore settings for Torque Pro. I will be installing a SoM upgrade to a RK3188 in a couple days, depending on USPS, and I will update this thread at that time to share what results I have with the current versions of both apps.
Click to expand...
Click to collapse
Thanks Matt, for your reply. I have been using Titanium for months without problems. But when changing one of the screens in Torque, NOT Modifying the PID, but deleting one PID or adding a PID, and then change my mind and want it back like when I backed it up, it restores the screen as I last modified it after the backup! Since I changed it, it's different than the backup. The backup should return the screen to when I backed it up. It does not! I will add that I never tried this before.......and I just used Malaysk's Lollipop ROM to upgrade from KItKat 4.4.4 to LP 5.1.1.....Thanks @Malaysk ,don't know that has anything to do with the problem. It appears, from the way that mine is doing, that Titanium is monitoring in the background and keeping my changes overriding the backup when they are different. I'm very new to the Android devices and have a very lot to learn about root and different apps. Please try when you get the SOM upgrade and duplicate what I tried and post results here. I use paypal and will pay for the solution to the problem if one exist! Thanks again
I jealous of the 5.1.1... that is why I am doing this SoM upgrade. I have a Sonata and only the RK3066 was available with the bezel for the car. The aftermarket bezels just looked cheap and I was looking for an OEM feel. No need to pay for a fix. If you feel inclined to do so, send beer/coffee money Malaysk's way.
matt1981m said:
I jealous of the 5.1.1... that is why I am doing this SoM upgrade. I have a Sonata and only the RK3066 was available with the bezel for the car. The aftermarket bezels just looked cheap and I was looking for an OEM feel. No need to pay for a fix. If you feel inclined to do so, send beer/coffee money Malaysk's way.
Click to expand...
Click to collapse
will do, and thanks.....having no problems with 5.1.1.....but I don't have access to anything but wifi on the road, so no phone, no internet,,,,,just music, GPS, and off-line maps...bjut well worth it.
matt1981m said:
I jealous of the 5.1.1... that is why I am doing this SoM upgrade. I have a Sonata and only the RK3066 was available with the bezel for the car. The aftermarket bezels just looked cheap and I was looking for an OEM feel. No need to pay for a fix. If you feel inclined to do so, send beer/coffee money Malaysk's way.
Click to expand...
Click to collapse
will do to Malaysk, and I'm having no problems with 5.1.1
DWilks said:
I backup Torque and then make a change to Torque. I then restore Torque and the changes that I made are in the backup that gets restored!!! And that's without doing another BackUP...just Restore.
Click to expand...
Click to collapse
That's because Titanium replaces the files in the data folder with what it's stored away. If there are new files with different names containing the changes you've made to the app., they won't get overwritten.
I'm just asking for help from anyone that uses Titanium Pro that can guide me to where in the settings that must be wrong to cause my problem. Thanks again for attempting to help!
Click to expand...
Click to collapse
Because of how Titanium does it's thing, there's no 'Setting' that will force it to overwrite the install folder's files when it hasn't actually got them stored away. When you make changes to the app.'s system files, they get changed from what Titanium backed up. You're asking to restore your old settings for Torque over the top of what you changed? Then go into your device's Settings menu, Applications, Application manager then delete all data for Torque and then uninstall it. Next, restore the app. from Titanium directly, and you'll be back where you were at the time you backed the app. up.
[Size=+1]Thread cleaned.
Stay respectful please. If you're having a problem with another member please use the report function and let us deal with it.
Thanks.[/size]
Save/restore /sdcard/.torque
I have the same issue. I've reset my phone and restored all apps using Titanium Backup yet the custom screens I had created for Torque, including my vehicle profile, weren't restored. My backups for all other apps and data restored fine, except Torque.
ShieldOfSalvation said:
I have the same issue. I've reset my phone and restored all apps using Titanium Backup yet the custom screens I had created for Torque, including my vehicle profile, weren't restored. My backups for all other apps and data restored fine, except Torque.
Click to expand...
Click to collapse
Glad to help you on this problem ShieldOfSalvation. That was one of the most frustrating problems that I had and couldn't get an answer that worked. Those screens are a pain in the ass to have to keep making.
Here's a solution that worked for me: All of your screens & vehicle settings are located in a folder called ".torque" (without those quote marks) .torque . It's located in the "internal storage sdcard" as in this location "internal storage sdcard\.torque . That 'slash mark' might be flipped the other way...as in / instead of \...I don't remember which.
You need to copy the folder .torque WHILE YOU STILL HAVE YOUR SCREENS THAT YOU SET UP to an External device like the EXTERNAL SDCARD (GPS CARD if you have one). And then, after you have completed whatever upgrade or process that you have done that erases your "screens and vehicle settings" and goes to default, JUST COPY YOUR SAVED .torque FOLDER BACK TO IT'S ORIGINAL LOCATION AND OVER WRITE THE ONE THAT'S NOW THERE. You can also rename the .torque folder that's in the internal storage sdcard and paste the SAVED .torque folder there. If you don't make any changes to your screens very often, keep that .torque folder with your screens in a safe place and just copy and paste it over the default one. If and when you do make changes, make sure to recopy .torque folder and store it in a safe place .....that's it....Hope it works for you!
DWilks, if you're right, then when I get home tonight I should be able to restore that .torque folder because in addition to Titanium Backup Pro I also use SyncMe Wireless by bvaisoft to backup the entire internal SD card and external SD card (including my Titanium Backup archives) to a network hard drive on my LAN. In this case where TB Pro appears to have missed that folder, SyncMe should have saved my hide. It snapshots the entire SD card's files and folders. I will come back with results later.
SyncMe did backup my .torque folder in the internal SD card because I had it set to copy hidden files and folders nightly. After copying it back to my SD card from my network share backup location, I was finally able to see my vehicle profile again in Torque and my custom dashboard is back. Thanks, DWilks!