Hi,
I have HTC One X, I did unlock and Root the device, but since then I face a screen off problem
meaning
whenever I want to turn the screen on using the power button it takes up to 3 or 10 presses to be on and allow me to use my device, sometimes it didn't respond at all, that I have to turn my device off entirely by long press the power button,
this thing happens after 2 to 5 hours of me installing any room, and some times it didn't happen for half hour or hour, but then it happens again,
I tried everything
from backing to Stock ROM to flashing over 10 different ROMS they all work fine but the screen off problem remains,
now I'm sure it's not a hardware issue since it wasn't there before unlocking my device, I tried relocking the device and flashing a stock ROM but it didn't work.
Some searching results says that it's a booting up problem that the graphic card have a wrong boot info, but if so how can I solve that ?!
my CID is 044 If anyone knows of have a hboot file or boot.img file or anything that can help me solving this problem I would be very grateful
waiting >>>
Maybe a problem with the power button?
Sent from my HTC One X using xda app-developers app
athulele said:
Maybe a problem with the power button?
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
It wasn't there before unlocking the device, it happens after that particular action
+ that the power button works fine and the screen three lower main touch buttons light up while the screen it self stay off !
Such problems are extremely hard to pin point... May be a hardware issue... Since you have have tried different roms!
Go back to stock and try sending it for warranty...
vin4yak said:
Such problems are extremely hard to pin point... May be a hardware issue... Since you have have tried different roms!
Go back to stock and try sending it for warranty...
Click to expand...
Click to collapse
the problem is when I go back to stock the hboot says relocked, how can I make it Locked !?!
another problem is that my device warranty over
EngASM said:
the problem is when I go back to stock the hboot says relocked, how can I make it Locked !?!
another problem is that my device warranty over
Click to expand...
Click to collapse
You can't get back to ***Locked***...
Hmmm... if it's a hardware issue then, you will have to shell out if you want to fix this....
vin4yak said:
You can't get back to ***Locked***...
Hmmm... if it's a hardware issue then, you will have to shell out if you want to fix this....
Click to expand...
Click to collapse
Well, I'm leaving the Hardware Issue thing to the bottom of my list, as I said before the problem exists only after I unlocked my device, so I think that something went wrong during that process maybe boot.img file or Hboot file error that makes the graphics out of order in such a way that it didn't boot correctly,,
do you know how can I get hboot file for my device !? or at least how can I upgrade it or downgrade it to a different number !?
EngASM said:
Well, I'm leaving the Hardware Issue thing to the bottom of my list, as I said before the problem exists only after I unlocked my device, so I think that something went wrong during that process maybe boot.img file or Hboot file error that makes the graphics out of order in such a way that it didn't boot correctly,,
do you know how can I get hboot file for my device !? or at least how can I upgrade it or downgrade it to a different number !?
Click to expand...
Click to collapse
Unlocking the device can't cause power buttons problem... That's for sure!
You can't downgrade your hboot/base if you have a S-ON device.. you can only upgrade it...
what is your base? run the following command in fastboot and post the result here:
Code:
fastboot getvar version-main
vin4yak said:
Unlocking the device can't cause power buttons problem... That's for sure!
You can't downgrade your hboot/base if you have a S-ON device.. you can only upgrade it...
what is your base? run the following command in fastboot and post the result here:
Code:
fastboot getvar version-main
Click to expand...
Click to collapse
version-main: 3.14.707.24
finished. total time: 0.006s
EngASM said:
version-main: 3.14.707.24
finished. total time: 0.006s
Click to expand...
Click to collapse
Your on the latest firmware available for your device... You can try flashing the same firmware over but I don't think it's gonna be of any help for correcting the Power Button problem...
Download: http://www.androidrevolution.nl/downloader/download.php?file=3.14.707.24.zip
vin4yak said:
Your on the latest firmware available for your device... You can try flashing the same firmware over but I don't think it's gonna be of any help for correcting the Power Button problem...
Download: http://www.androidrevolution.nl/downloader/download.php?file=3.14.707.24.zip
Click to expand...
Click to collapse
ok
so you say that it's a hardware issue for sure and there is no connection between unlocking the device and it's occurring ?!
EngASM said:
ok
so you say that it's a hardware issue for sure and there is no connection between unlocking the device and it's occurring ?!
Click to expand...
Click to collapse
Yeah! 'Unlocking bootloader' just allows you to flash custom recovery by which you can flash custom roms!
However, just to make sure, try locking the bootloader again and then try using the power button and see if it registers the click everytime?!
vin4yak said:
Yeah! 'Unlocking bootloader' just allows you to flash custom recovery by which you can flash custom roms!
However, just to make sure, try locking the bootloader again and then try using the power button and see if it registers the click everytime?!
Click to expand...
Click to collapse
Where can I get a Stock ROM compatible with my Device
EngASM said:
Where can I get a Stock ROM compatible with my Device
Click to expand...
Click to collapse
Lock your bootloader and then run this RUU : http://bugsylawson.com/files/file/1...24-radio-5120416229-release-296434-signedexe/
Run with admin privileges.
vin4yak said:
Lock your bootloader and then run this RUU : http://bugsylawson.com/files/file/1...24-radio-5120416229-release-296434-signedexe/
Run with admin privileges.
Click to expand...
Click to collapse
I'll try that and then back to you
EngASM said:
I'll try that and then back to you
Click to expand...
Click to collapse
same problem
I Noticed that the power button works correctly in the first couple hours, then after that or in another word after 2 to 3 hours it start miss-responding to presses !!
EngASM said:
same problem
I Noticed that the power button works correctly in the first couple hours, then after that or in another word after 2 to 3 hours it start miss-responding to presses !!
Click to expand...
Click to collapse
What to say m8!! You have tried different roms, kernels, locked bootloader, Hell even went full stock with RUU...
If still the problem persists, it must surely be a hardware issue!
vin4yak said:
What to say m8!! You have tried different roms, kernels, locked bootloader, Hell even went full stock with RUU...
If still the problem persists, it must surely be a hardware issue!
Click to expand...
Click to collapse
Well Now I'm trying my last shot, Install CWM10.1 and enable the volume Roker keys to wake the screen up, it works till now, needs 24 hour to be sure,
but this ROM is really a power hungry ROM
do you know anyway I can minimize battery lose when I use this ROM !?!
EngASM said:
Well Now I'm trying my last shot, Install CWM10.1 and enable the volume Roker keys to wake the screen up, it works till now, needs 24 hour to be sure,
but this ROM is really a power hungry ROM
do you know anyway I can minimize battery lose when I use this ROM !?!
Click to expand...
Click to collapse
Yes, flash XM kernel (repack) and then install trickster mod and do the following settings:
Governor : Smartmax/PMC
IO Scheduler: row/noop
CPU cap: 1.2 GHz
When you want to play games, just change governor to interactive and scheduler to row... 1.2 Ghz is more than enough to run games... If you want you can get back to 1.5 Ghz...
All this might sound a long procedure, but it's just a few clicks! and you can set this on boot, so once configured, you can forget about it!
vin4yak said:
Yes, flash XM kernel (repack) and then install trickster mod and do the following settings:
Governor : Smartmax/PMC
IO Scheduler: row/noop
CPU cap: 1.2 GHz
When you want to play games, just change governor to interactive and scheduler to row... 1.2 Ghz is more than enough to run games... If you want you can get back to 1.5 Ghz...
All this might sound a long procedure, but it's just a few clicks! and you can set this on boot, so once configured, you can forget about it!
Click to expand...
Click to collapse
I didn't understand a word [email protected]! Literally !
Related
Hold Vol Down + Power and goto recovery.
When you get the red triangle push Vol Up and Power and you get a blue recovery menu that looks like this
(I didn't have an update.zip on my sdcard...)
Tried it a couple of times, but it seems to be just as restricted by the desire locked system as when we use fastboot...
ZiCoN said:
Tried it a couple of times, but it seems to be just as restricted by the desire locked system as when we use fastboot...
Click to expand...
Click to collapse
Try flashing a stock rom from the recovery and see what happens. Maybe it will solve the issue. Wipe everything first.
abc27 said:
Try flashing a stock rom from the recovery and see what happens. Maybe it will solve the issue. Wipe everything first.
Click to expand...
Click to collapse
I think I've done it before... But I'll give it a go again tomorrow... Gotta get some sleep. Have a 2½ yearold who thinks sleep is over-rated :S
abc27 , It seem that my discover isn't very usefull as they seems to be able to do all of this from fastboot !
adi90 said:
abc27 , It seem that my discover isn't very usefull as they seems to be able to do all of this from fastboot !
Click to expand...
Click to collapse
Still it may be useful somewhere down the line...
right ... actually if the found a way to signed something correctly it will be more "user friendly"
If we could sign something correctly (meaning, with HTC's release keys) there wouldn't be a USB problem in the first place because we would be able to change the SPL.
deovferreira said:
If we could sign something correctly (meaning, with HTC's release keys) there wouldn't be a USB problem in the first place because we would be able to change the SPL.
Click to expand...
Click to collapse
I know that is not easy, but can be possible extract from the same check key point?
hey
i am trying the whole day to fix my phone. but i guess it is almost imposible :/
i can't get in recovery mode (nothing happens) and can't turn in on (only vibrates once, black screen)
i have been told to download to download
OTA_Bravo_Froyo_HTC_WWE_2.29.405.5-2.29.405.2_releasedauhl6jhok5cmdm6.zip
and rename it to PB99IMG.zip and put it on sd, which i did, but how can i flash it if my recovery mod can't start up?
please help?
ANY suggestions???? please heeelp! :/
It would be helpful it you told us what you did to get your phone into this state.
Can you get into fastboot? (power on while pressing back-button)
Tillus said:
It would be helpful it you told us what you did to get your phone into this state.
Click to expand...
Click to collapse
i installed
RUU_Bravo_HTC_Europe_1.15.405.1_Radio_32.30.00.28U _4.05.00.11_release_121684.exe
via fastbooth
do you know what to do... please say yes
Tillus said:
It would be helpful it you told us what you did to get your phone into this state.
Can you get into fastboot? (power on while pressing back-button)
Click to expand...
Click to collapse
no i can't get into fast boot... ://
I suggest you read the notice from jcase... I'm guessing you were runiing gb?
Sent from my ADR6400L using XDA Premium App
you ruu was too old - this version doesn't have the required drivers for SLCD.
That means, you phone probably does work, but the screen is black.
I don't know how to solve this (probably by flashing the newer RUU, Version 2.29....) exactly, but hopefully this gives you a clue where to look for a fix.
There were many people experiencing this after Froyo was available. They did the ota-update, then noticed, that it wasn't possible to root with the new bootloader (Version 0.93ish) at that time, which was installed along with the froyo-ota, so they tried to downgrade back to 2.1 and ended up where you are. (bootoader .80 instead of .83ish).
Richpopski123 said:
I suggest you read the notice from jcase... I'm guessing you were runiing gb?
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
jcase??
i had this rom
http://forum.xda-developers.com/showthread.php?t=1040121
which didn't work and because of it i couldn't restore any of my previous roms. that is why i had to flash a rom from my computer fastbooth
have u any suggestions what should i do?
Tillus said:
you ruu was too old - this version doesn't have the required drivers for SLCD.
That means, you phone probably does work, but the screen is black.
I don't know how to solve this (probably by flashing the newer RUU, Version 2.21....) exactly, but hopefully this gives you a clue where to look for a fix.
There where many people experiencing this after Froyo was available. They did the ota-update, then noticed, that it wasn't possible to root with the new bootloader (Version 0.93ish) at that time, which was installed along with the froyo-ota, so they tried to downgrade back to 2.1 and ended up where you are. (bootoader .80 instead of .83ish).
Click to expand...
Click to collapse
yes... that makes sense. but does really no one have any clue what to do?? i worked the whole summer for this phone and now is gone
http://forum.xda-developers.com/showthread.php?t=748498
Probably the easiest and safest way ist to boot into fastboot although you don't see it and flash the newsest ruu,
so:
1) make sure, phone is off (i.e. pull battery and put back in)
2) push and hold "back" and hit power.
3) wait 30 seconds or so, to be on the safe side
4) connect phone to pc via usb
5) run RUU on PC, version 2.29.405... (RUU, not OTA!)
And make sure to have some juice in your battery
Here you can get the RUU:
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe
Its on >>Shipped Roms<< , 7th from top.
btw. am I assuming correctly that your phone is unbranded?
btw2: Do it all on your own risk. I'm trying to help, but I dont want to be held resposible, if something goes wrong, so maybe wait for someone else to confirm
Tillus said:
Here you can get the RUU:
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe
Its on >>Shipped Roms<< , 7th from top.
btw. am I assuming correctly that your phone is unbranded?
btw2: Do it all on your own risk. I'm trying to help, but I dont want to be held resposible, if something goes wrong, so maybe wait for someone else to confirm
Click to expand...
Click to collapse
how do i know that?
can u please stick with me... i will try to do that now
i apriciate your help... i think that nothink worse can be done to my phone, so i will try
did you see any provider logo during startup? Or any preinstalled apps or bookmarks which point into a provider's direction? Where did you buy it? And did you need a goldcard for rooting?
if you answer is no on every question, you're probably not branded.
Did you write down the version number before you did anything to your phone (when you have a .405. in your version number, your phone is definitely not branded).
Edit: but I really recommend to read the linked thread. My device is unbranded amoled so I never did any of this myself (apart from running a RUU), so always think twice before following my steps
Tillus said:
did you see any provider logo during startup? Or any preinstalled apps or bookmarks which point into a provider's direction? Where did you buy it? And did you need a goldcard for rooting?
if you answer is no on every question, you're probably not branded.
Did you write down the version number before you did anything to your phone (when you have a .405. in your version number, your phone is definitely not branded).
Edit: but I really recommend to read the linked thread. My device is unbranded amoled so I never did any of this myself (apart from running a RUU), so always think twice before following my steps
Click to expand...
Click to collapse
i hope its not branded
do i need to click od hold power button?
like you do, when you power on. The important part is to hold "back" while powering on
Tillus said:
like you do, when you power on. The important part is to hold "back" while powering on
Click to expand...
Click to collapse
do i have to hold down like 30 sec? no right?
i think this won't work
if i go to the sotre and give the device back... what would be a good excuse for phone not working?
jann32 said:
do i have to hold down like 30 sec? no right?
Click to expand...
Click to collapse
no. You have booted into recovery before, didn't you? Now you do the same but use "back" instead of vol- , because you want to boot into fastboot.
All I wanted to say with this 30 seconds is to give it some time to boot into fastboot, thats all. Press and hold "back", press "power", release power, wait 3 seconds, release "back", wait 10 seconds and plug in usb, start ruu.
Thats all I wanted to say with my previous post. Sry, if it was confusing
Tillus said:
no. You have booted into recovery before, didn't you? Now you do the same but use "back" instead of vol- , because you want to boot into fastboot.
All I wanted to say with this 30 seconds is to give it some time to boot into fastboot, thats all.
Click to expand...
Click to collapse
will try again
will the phone vibrate?
YES YES YES its upadatinjg.... hope this works
...my screen is back... but hopefully it finishes correctly... and doesn't go black again
what will happen if the phone is branded?
can i unbrand it?posebly not? cause its bricked ight? :/
no.
10charrrrr
If it is branded, you get a cid-error, so ruu wont finish. But your phone probably isn't branded, otherwise you would have come across problems during flashing custom roms or/or radios (-->goldcard). And because this doesn't seem to be the case, your device is not branded.
When the RUU is done, you phone is completely back to stock and you can do whatever you like to it...
Tillus said:
no.
10charrrrr
Click to expand...
Click to collapse
my phone works!!
i can not tell u how greatfull i am
THANK U
thank u for sticking with me again
can flashing a cwm recovery brick my phone?
how about TITANIUM kernel?
ps: every thing is stock on my one v
Hi
Actually those things cannot "brick" your phone.
In the worst case you can always apply the RUU to get it back to stock.
Only really "stupid" things can do this
e.g. Power Failure during RUU or pulling the USB plug during flashing
Regards
max
alifa said:
can flashing a cwm recovery brick my phone?
how about TITANIUM kernel?
ps: every thing is stock on my one v
Click to expand...
Click to collapse
it takes a special kind of person to brick with kernel and or recovery so your fine.
maxwen said:
Hi
Actually those things cannot "brick" your phone.
In the worst case you can always apply the RUU to get it back to stock.
Only really "stupid" things can do this
e.g. Power Failure during RUU or pulling the USB plug during flashing
Regards
max
Click to expand...
Click to collapse
What is RUU?
I Know it is a really silly question.
alifa said:
What is RUU?
I Know it is a really silly question.
Click to expand...
Click to collapse
RUU = Rom Update Utility
which is HTC's way of distributing updates via the pc, also you will find a list of most of the RUU's available for this rom in the development forum (it's a sticky) which will help you revert to stock.
read this thread, might answer some future Questions
I added TITANIUM kernel to my phone, how can i use its features ?
Hi
alifa said:
I added TITANIUM kernel to my phone, how can i use its features ?
Click to expand...
Click to collapse
Install a set cpu frequency app - you will find links to some in the titanium kernel thread
Set what you like - apply on boot - ready
regards
max
Ok so for someone like you who is new to kernels let me put it this way, Titanium kernel enables your phone's processor to perform faster or slower than in your stock, to customize the speed you have to use an external app.
i use this...
https://play.google.com/store/apps/details?id=com.antutu.CpuMasterFree&hl=en
P.S: Overclocking too much is harmful for your phone so do not set it too high.
Repeatedly press power button when you fail to enter fastboot mode. If you do this, you are most likely to get a blank screen and QHSUSB_DLOAD error when you plug it into pc. if you get this error,your phone is hard brick and the only solution is phone replacement. To avoid this, you can install fast reboot or similar app as soon as your phone get rooted if you want to enter fastboot mode/recovery.
Better late than never, but never late is better.
-Drake
JalmiNyondong1933 said:
Repeatedly press power button when you fail to enter fastboot mode. If you do this, you are most likely to get a blank screen and QHSUSB_DLOAD error when you plug it into pc. if you get this error,your phone is hard brick and the only solution is phone replacement. To avoid this, you can install fast reboot or similar app as soon as your phone get rooted if you want to enter fastboot mode/recovery.
Better late than never, but never late is better.
-Drake
Click to expand...
Click to collapse
i use the tool kit, i never go to boot loader Manually.
i didn't understand the last part.
HI, i've been on here all night trying to flash a new radio but after 3 hours I am pulling my hair out.
I have htc desire hd with cyanogenmod 7.2.0.
My radio is old so I downloaded PD98IMG as I don't have gps and it needs updating anyway. I've been searching around and I cant even get into bootloader?!
Maybe I don't have s-off?! If so I can't even get it?!
Please can someone PM me, I'll even pay you to help me!! I need a fresh pair of eyes and someone who knows what they're doing.
MARKMAKAVELI said:
HI, i've been on here all night trying to flash a new radio but after 3 hours I am pulling my hair out.
I have htc desire hd with cyanogenmod 7.2.0.
My radio is old so I downloaded PD98IMG as I don't have gps and it needs updating anyway. I've been searching around and I cant even get into bootloader?!
Maybe I don't have s-off?! If so I can't even get it?!
Please can someone PM me, I'll even pay you to help me!! I need a fresh pair of eyes and someone who knows what they're doing.
Click to expand...
Click to collapse
Are you S-OFF? have you checked that in hboot? without S-OFF it is impossible to flash a radio
glevitan said:
Are you S-OFF? have you checked that in hboot? without S-OFF it is impossible to flash a radio
Click to expand...
Click to collapse
I don't know how to check. I tried volume and power but it just brings up usual options.
I went into recovery mode and tried to install the PDIMG file from zip file but it aborted?!
Also same happended when I tried to install fastbootcommander
MARKMAKAVELI said:
I don't know how to check. I tried volume and power but it just brings up usual options.
I went into recovery mode and tried to install the PDIMG file from zip file but it aborted?!
Also same happended when I tried to install fastbootcommander
Click to expand...
Click to collapse
ok..you never install a PD98IMG file in recovery unless you want to mess your device. Boot the phone normally, go to menu>settings>power options and untick fastboot.
Then power off the device and turn it on by pressing power + volume down
Where's fast boot located in 4.2.2 ROMs
Sent from my Desire HD using xda premium
glevitan said:
ok..you never install a PD98IMG file in recovery unless you want to mess your device. Boot the phone normally, go to menu>settings>power options and untick fastboot.
Then power off the device and turn it on by pressing power + volume down
Click to expand...
Click to collapse
Thanks for the reply glevitan.
I don't have the "power options" option.
Nothing special happens when pressing power + volume down. It simply reacts to my pressing of the power button and offers me the usual shut down, reboot, silent, aeroplane mode etc.
Jrhodes85 said:
Where's fast boot located in 4.2.2 ROMs
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
1. I don't understand what you're asking and why. Could you clarify? Like, where the binaries are saved? And is there a reason you're asking?
2. You're kind of hijacking someone else's thread on a completely unrelated topic. You might want to consider creating a new Q&A thread.
MARKMAKAVELI said:
Thanks for the reply glevitan.
I don't have the "power options" option.
Nothing special happens when pressing power + volume down. It simply reacts to my pressing of the power button and offers me the usual shut down, reboot, silent, aeroplane mode etc.
Click to expand...
Click to collapse
You missed the power OFF the device first
bananagranola said:
1. I don't understand what you're asking and why. Could you clarify? Like, where the binaries are saved? And is there a reason you're asking?
2. You're kind of hijacking someone else's thread on a completely unrelated topic. You might want to consider creating a new Q&A thread.
Click to expand...
Click to collapse
Chill up miss...
Maybe he just wanted to ask where is the fastboot located(glevitan said to uncheck the fast boot in setting which only in sense based rom) and he used aosp based rom so dont have any fastboot option in setting,so he asked in this thread
hdorius said:
Chill up miss...
Maybe he just wanted to ask where is the fastboot located(glevitan said to uncheck the fast boot in setting which only in sense based rom) and he used aosp based rom so dont have any fastboot option in setting,so he asked in this thread
Click to expand...
Click to collapse
Haha, thanks; I needed that. I've been in a grumpy mood recently. Sorry...
Apologies Glevitan, I can get into hboot now. I did miss the power off bit first.
However I can't press up volume as its broke and has been for sometime.
Tried to follow the guide http://forums.androidcentral.com/sp...astboot-flash-radio-modem-using-fastboot.html
but it just says waiting for device and has done even before I worked out how to hboot.
I tried just loading hboot on its own to see what happened and when i load up the hboot it just says do I want to update radio v2 and I can't select yes (if that's what I should do?)
Why not use reboot direct to recovery? Select reboot > recovery
Sent from my Desire HD
yumm91 said:
Why not use reboot direct to recovery? Select reboot > recovery
Sent from my Desire HD
Click to expand...
Click to collapse
Radio can't be flashed in Recovery..the phone will be messed
yumm91 said:
Why not use reboot direct to recovery? Select reboot > recovery
Sent from my Desire HD
Click to expand...
Click to collapse
I don't have that option?
edit: thanks hdorius
So if your vol up button is broken,i think u can't flash the radio unless your device is ENG S-OFF which can flash the radio via fastboot...
hdorius said:
So if your vol up button is broken,i think u can't flash the radio unless your device is ENG S-OFF which can flash the radio via fastboot...
Click to expand...
Click to collapse
I have s-off so I will look at another tutorial tonight with fresh eyes. Last night was soul destroying!
Thanks for your help guys, hopefully I won't be back on to pester you!
MARKMAKAVELI said:
I have s-off so I will look at another tutorial tonight with fresh eyes. Last night was soul destroying!
Thanks for your help guys, hopefully I won't be back on to pester you!
Click to expand...
Click to collapse
It's different,i think u better wait and ask glevitan about it
hdorius said:
Radio can't be flashed in Recovery..the phone will be messed
Click to expand...
Click to collapse
lol.. i meant the bootloader. Thank god you corrected me..
You can use the adb to reboot to bootloader. Just go to terminal, cmd whatever, type "adb reboot bootloader".. And you can flash radio using fastboot command.. But you need to be s-off.. I am not sure whether it is possible to flash radio using shipped hboot. I think it is possible. But better to wait for glevitan to clear things up. :good:
MARKMAKAVELI said:
Apologies Glevitan, I can get into hboot now. I did miss the power off bit first.
However I can't press up volume as its broke and has been for sometime.
Tried to follow the guide http://forums.androidcentral.com/sp...astboot-flash-radio-modem-using-fastboot.html
but it just says waiting for device and has done even before I worked out how to hboot.
I tried just loading hboot on its own to see what happened and when i load up the hboot it just says do I want to update radio v2 and I can't select yes (if that's what I should do?)
Click to expand...
Click to collapse
My advice is that you fix the volume rocker first. If you get stuck flashing a radio and your rocker is messed...then you might get stuck in the splash screen...
It broke a while ago. I bought a new rocker and glued it on. The glue set and stuck, disabling the up volume button only. I won't be able to fix this now I've ruined it!
I am not sure if anyone experience this but then again my phone is rooted. I was just browsing around the internet and it started heating up, next thing i know the phone just shutdown and all kind of error popout then it just hard reset by itself where I had to set all the stuff again. But after a while all those error kept popping out again and now I can't even do anything anymore.
Pretty much it just get stuck with HTC logo & beats now, I still can access the recovery menu. Trying to find the right RUU file and which I am not sure myself now where to download or what to download.
The phone CID is HTC_044, I remember using the latest update available and so on. Any idea what am I suppose to do now? I was looking at the nandroid copy from this thread and downloaded my but I have no idea how to use it
Do the command
Fastboot getvar version-main
Post back the number please
Mr Hofs said:
Do the command
Fastboot getvar version-main
Post back the number please
Click to expand...
Click to collapse
Thanks for the quick reply, anyway how can I do that? using adb? (sorry for the noob question)
I am in fastboot usb now
Phone in fastboot usb / bootloader
Then open a command window in the folder where also the fastboot files are ! Point in the folder with the mouse and hold shift + right click the mouse - select open new window here
And type there the command
Mr Hofs said:
Phone in fastboot usb / bootloader
Then open a command window in the folder where also the fastboot files are ! Point in the folder with the mouse and hold shift + right click the mouse - select open new window here
And type there the command
Click to expand...
Click to collapse
Got it forgot it was a exe file, anyway I am stuck trying to get the phone to (on) the screen is black now, holding down the power button for more then 10 second don't seem to work nor the volume button+ power button too works.
Got it:
version-main: 3.14.707.24
finished. total time: 0.006s
Try it with the volume - and the power button
Mr Hofs said:
Try it with the volume - and the power button
Click to expand...
Click to collapse
version-main: 3.14.707.24
finished. total time: 0.006s
(Pretty much getting annoyed with this phone, I should have just use a custom rom rather then this unstable version of stock rom)
Here it is
http://bugsylawson.com/index.php/fi...24-radio-5120416229-release-296434-signedexe/
Phone in the bootloader and lock it
Fastboot oem lock
Keep the phone in the bootloader and execute the ruu from the pc with admin rights. Right click the ruu and select
Run as administrator
Mr Hofs said:
Here it is
http://bugsylawson.com/index.php/fi...24-radio-5120416229-release-296434-signedexe/
Phone in the bootloader and lock it
Fastboot oem lock
Keep the phone in the bootloader and execute the ruu from the pc with admin rights. Right click the ruu and select
Run as administrator
Click to expand...
Click to collapse
Thanks
Installed back all my apps... now after did all those I try to sign into the htc friend steam and only to make the phone reboot. Like what is wrong with this phone
seems like it is stuck at the htc logo now... and back to square one. Should I claim for warranty?
This is the second time it factory reset by itself now, so like I don't think this is an software issue
Also I notice now I can't turn off the phone, it just restart and I get some error notification.
Warranty it is.....
Mr Hofs said:
Warranty it is.....
Click to expand...
Click to collapse
I used One_X_All-In-One_Kit_v2.3 to lock back the boot, will I need to do anything else before I send for warranty? all my files are gone, seems like not only it hard reset but also deleted and created a new partition in the phone lol
adkz said:
I used One_X_All-In-One_Kit_v2.3 to lock back the boot, will I need to do anything else before I send for warranty? all my files are gone, seems like not only it hard reset but also deleted and created a new partition in the phone lol
Click to expand...
Click to collapse
Make sure its on stock firmware and stock recovery.
My pal sent his back with boot loader unlocked but all stock firmware and they repaired it.
Sent from my HTC One X using xda app-developers app
He used a ruu already so he is as stock as he can be.....
treebill said:
Make sure its on stock firmware and stock recovery.
My pal sent his back with boot loader unlocked but all stock firmware and they repaired it.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Mr Hofs said:
He used a ruu already so he is as stock as he can be.....
Click to expand...
Click to collapse
After noticing the overheat problem seems to be commen, I bought myself a S3 and might actually be happy with it. I mean like leedroid is no more around, htc service is not available in my state plus I got to wait like almost a month to get a board replacement or the whole phone. I am gonna sell it off lol.
Then again thanks a lot for the help :good: it made me choose wisely now.
Oke ...
CASE CLOSD !
Just wanted to inform the rest about my warranty status, finally got my phone back but.. it is being recond :laugh: I gave htc service center a call last Thursday and was inform that my phone was on the way back to my city. Best part was, the operator didn't know what did they do with it lol
Attached the repair report and seems like they even added a dent to my top left? I was using otterbox defender since I gotten this, not too sure how that dent was created but then should not have been around while i was on still using the phone before it just died on me. Then again a free hardware upgrade to 32gb for this phone sure did make me happy.
Not too sure what to do with this phone now, some how I don't feel like selling it so might just switch around with my sIII once in a while lol