Related
Got a TPU case on my phone and love it. Is there a desktop charger other than the seidio one that could fit it?
Just use a USB cord with a case with a prop, works great
Sent from my Galaxy Nexus using xda premium
neederishelp said:
Just use a USB cord with a case with a prop, works great
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
what exactly do you mean ??
maybe you have a link or some guide..
Thanks in advance
get one that is made for the galaxy note.
kms108 said:
get one that is made for the galaxy note.
Click to expand...
Click to collapse
do you have a link?
neederishelp said:
Just use a USB cord with a case with a prop, works great
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
i know i can do something crappy like this but was looking for something possibly that would look nice. I did come across this and may see if I can have a friend help me with this as its way out of my league.
http://yanminhong.blogspot.com/2012/01/galaxy-nexus-dock-mod.html
kms108 said:
get one that is made for the galaxy note.
Click to expand...
Click to collapse
Do you know for sure it would work?
Sent from my Galaxy Nexus using xda premium
I got a few of these: http://www.ebay.com/itm/SAMSUNG-GALAXY-S2-S-II-I9100-ZENIS-DESKTOP-DOCK-CHARGER-CRADLE-/220883609072?_trksid=p4340.m185&_trkparms=algo%3DSIC.NPJS%26its%3DI%252BC%26itu%3DUA%26otn%3D5%26pmod%3D270865448058%26ps%3D63%26clkid%3D5859734319996833550
and they have worked with all my Samsung Android phones WITH "thinner" type cases. When I put the Diztronics case on the GNex it didn't fit by a hair so I took a Dremel tool and ground down the front edge just a little. It looks a LOT worse in the picture (since it is close up and due to the lighting) then it does on my desk but it could also be done a lot neater. I kind of slipped with the Dremel. For the price, these docks can't be beat. They only make them in 1 size yet they advertise them as if they are different (and jack up the prices depending on the phone). There is NO audio or video out, it's simply a charge/sync/nightstand cradle.
Today I broke down and ordered the "RND Power Solutions Deluxe 2nd Battery Charger and Data Sync Cradle" from amazon.com (too new to post a link, just give it a search).
This may be what you are looking for, because it is described as having an insert you can put in/remove depending on the case you are using.
I should have this guy in-hand Friday and I can give you a more detailed review.
wookaru said:
Today I broke down and ordered the "RND Power Solutions Deluxe 2nd Battery Charger and Data Sync Cradle" from amazon.com (too new to post a link, just give it a search).
This may be what you are looking for, because it is described as having an insert you can put in/remove depending on the case you are using.
I should have this guy in-hand Friday and I can give you a more detailed review.
Click to expand...
Click to collapse
Looking forward to read it
Sendt fra min Galaxy Nexus med Tapatalk
Someone just posted a review of the RND Power Solutions dock in this forum.
http://forum.xda-developers.com/showthread.php?t=1465597
Looks like his LTE phone with a thin case was a tight fit, so this may not be what you are looking for :-(
wookaru said:
Someone just posted a review of the RND Power Solutions dock in this forum.
http://forum.xda-developers.com/showthread.php?t=1465597
Looks like his LTE phone with a thin case was a tight fit, so this may not be what you are looking for :-(
Click to expand...
Click to collapse
Not sure you´r correct, since they are saying in the reviews, that the sparepart charger doesn´t fit their type of battery, but its ment for the GSM version. .
So IMO this one on Amazon is for the GSM-version, but still wil work for the LTE versions phones, but not the spare battery they may want to charge..
That looks to be the same as the KiDiGi one listed on the Mobi site except the Amazon price is a lot less expensive. However on the Mobi site it is listed as a GSM (i9250) version.
I've been tempted as they also have a car dock with the same form factor but I'm really looking for something that looks decent but allows me to leave my Qmadix case on the phone.
tgmorris said:
That looks to be the same as the KiDiGi one listed on the Mobi site except the Amazon price is a lot less expensive. However on the Mobi site it is listed as a GSM (i9250) version.
I've been tempted as they also have a car dock with the same form factor but I'm really looking for something that looks decent but allows me to leave my Qmadix case on the phone.
Click to expand...
Click to collapse
it's the same thing.
kms108 said:
it's the same thing.
Click to expand...
Click to collapse
Has any of you bought from 4u-mobi??
Galaxy Nexus-Tapatalk
I finally got the charging dock from 4u-mobi and can confirm that the GSM model with a casemate barely there case will fit..
I also got a s-curve TPU case, that fit this dock as well....
In both combinations you need to take off the insert
what about the clingo desktop stand. i;ve been looking at getting a universal desktop dock so that i can use it with a case and future phones.
neotekz said:
what about the clingo desktop stand. i;ve been looking at getting a universal desktop dock so that i can use it with a case and future phones.
Click to expand...
Click to collapse
I just ended up getting the gogostand and taping it to my desk. Works flawless. Yes it doesnt charge, but I couldnt find anything that I liked without having to remove my case each time. And I wasnt going to do that.
Stumbled across this on ebay:
New Wireless Charge Receiver Back Case Protective Cover Skin For HTC M7 ONE 801e
http://www.ebay.de/itm/161058907579...eName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
It seems to be essentially a plastic backcover with taped-in "wireless charge receiver" and a micro-usb plug to use for charging.
I really want wireless charging but this left me extremely cautious... is there by chance someone around here who actually owns such a thing and can share some experiences? I mean it doesn´t even say if it´s QI compatible and such minor facts, seller doesn´t respond :-/
Or is there maybe an alternative I haven´t found yet?
ecki2k said:
Stumbled across this on ebay:
New Wireless Charge Receiver Back Case Protective Cover Skin For HTC M7 ONE 801e
http://www.ebay.de/itm/161058907579...eName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
It seems to be essentially a plastic backcover with taped-in "wireless charge receiver" and a micro-usb plug to use for charging.
I really want wireless charging but this left me extremely cautious... is there by chance someone around here who actually owns such a thing and can share some experiences? I mean it doesn´t even say if it´s QI compatible and such minor facts, seller doesn´t respond :-/
Or is there maybe an alternative I haven´t found yet?
Click to expand...
Click to collapse
interesting, would be great if:
1. it really worked
2. the usb plug didn't stick out
3. the little wires didn't break
I would also like to know more about this thing
it looks awesome. looks like it just might work. would love to hear from anyone that got something like this
Sent from my HTC One using xda premium
it looks good. Any idea how strong the connections / cable / plug is? is it thick?
how many mA is the charging pad rated at ?
Questions ...
1xinfusion said:
it looks good. Any idea how strong the connections / cable / plug is? is it thick?
how many mA is the charging pad rated at ?
Questions ...
Click to expand...
Click to collapse
No one seems to know much about it yet
Sent from my HTC One using xda premium
Honestly I think this thing looks really shoddy...I mean it looks like the kind of thing I could whip up in my workshop with a spare case. That said, I almost want to buy it, test it, and dissect it to use on a high end case.
exactly. That thing looks easily 100% fake. I pity anyone who believes in the product or that it'll work as advertised.
It looks really cheap. The wires stick out. I can see the wires getting torn from the port very easily
ShatteredAxe said:
Honestly I think this thing looks really shoddy...I mean it looks like the kind of thing I could whip up in my workshop with a spare case. That said, I almost want to buy it, test it, and dissect it to use on a high end case.
Click to expand...
Click to collapse
I swear to God I was thinking the same exact thing
Sent from my HTC One using xda premium
ceelo2008 said:
I swear to God I was thinking the same exact thing
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
If it worked I would use it with an Otterbox and carve out the rubber charing port cover so the plug would be hidden. I think that would be pretty near perfect. The only part that really worries me about that thing are the wires that go to the plug, they don't look near the correct gauge.
ceelo2008 said:
I swear to God I was thinking the same exact thing
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
+1
Too bad, thought some experimental kind of guy already had this and could say if it really is as shoddy as it looks :-/
Well.. Even if it works, what kind of charging station would it work with?
QI? Powermat? Touchstone? doesn't say..
Bought this and I thought I'd share it with you guys. I haven't received it yet though so I can't comment on its quality but there is a xda thread where people have received it. It shipped in 6 hours after purchase btw. I know it's not the same thing but it's a good idea and for the price with free shipping u can't beat it. I have a wireless charging orb with my n4 so I'd love to find a qi compatible case for the H1.
Purchase link http://item.mobileweb.ebay.com/viewitem?index=0&sbk=1&nav=SEARCH&itemId=370836827347
Xda thread link http://forum.xda-developers.com/showthread.php?p=43068818
We see you meow on our nexus⁴ can we haz some more? Ohai there meow aren't u looking sexy >^.^<
DowntownJeffBrown said:
Bought this and I thought I'd share it with you guys. I haven't received it yet though so I can't comment on its quality but there is a xda thread where people have received it. It shipped in 6 hours after purchase btw. I know it's not the same thing but it's a good idea and for the price with free shipping u can't beat it. I have a wireless charging orb with my n4 so I'd love to find a qi compatible case for the H1.
Purchase link http://item.mobileweb.ebay.com/viewitem?index=0&sbk=1&nav=SEARCH&itemId=370836827347
Xda thread link http://forum.xda-developers.com/showthread.php?p=43068818
We see you meow on our nexus⁴ can we haz some more? Ohai there meow aren't u looking sexy >^.^<
Click to expand...
Click to collapse
How did this work out ?
Copied from the N4 thread:
I just ordered this and hopefully it will work on our GN4:
http://www.ahappydeal.com/product-137289.html
If anyone have any experienced with it, please post your short review here.
TIA
Update:
I had this charger for less than a week now and all I can say it.....WOW and I will order 1 more for a car-mod.
It does require 5V 2A power inverter and it also charges my new G7 (2013)
Even my N4 has a thick casing, it was no problem with this charger compared to other Qi chargers. Placement is also not pinicky.
anyone have anything to add here? why shouldn't I buy this?
destroyer67 said:
Copied from the N4 thread:
I just ordered this and hopefully it will work on our GN4:
If anyone have any experienced with it, please post your short review here.
TIA
Update:
I had this charger for less than a week now and all I can say it.....WOW and I will order 1 more for a car-mod.
It does require 5V 2A power inverter and it also charges my new G7 (2013)
Even my N4 has a thick casing, it was no problem with this charger compared to other Qi chargers. Placement is also not pinicky.
Click to expand...
Click to collapse
fiction916 said:
anyone have anything to add here? why shouldn't I buy this?
Click to expand...
Click to collapse
This...
fiction916 said:
anyone have anything to add here? why shouldn't I buy this?
Click to expand...
Click to collapse
Because for 50 cents a day you can feed a starving child in Africa?
Sent from my Nexus 7 using Tapatalk 4 Beta
fiction916 said:
anyone have anything to add here? why shouldn't I buy this?
Click to expand...
Click to collapse
Yeah, I just bought a Nokia DT-900 from ebay for $24.99. It's a little more, but I trust Nokia over this brand over the long run.
It looks like I got the last one. The other ebay prices are a bit higher starting at around the mid 30 dollar range.
UPDATE: Just checked and it seem AT&T has the Nokia for $36.75 and free shipping ($49.99 at verizon and Amazon).
fiction916 said:
anyone have anything to add here? why shouldn't I buy this?
Click to expand...
Click to collapse
Because it's tiny and the official samsung one can be had for $24.99 with the coupon code going around
Sent from my SPH-L720 using Tapatalk 2
Ordered yesterday afternoon, got shipping notice overnight. Will post once I receive.
Just ordered 2. Great deal! Thanks.
FYI - The Nokia DT-910 works with the N7 as well, only landscape though.
Sent from my SCH-I545 using Tapatalk 4 Beta
eyecon82 said:
Because it's tiny and the official samsung one can be had for $24.99 with the coupon code going around
Sent from my SPH-L720 using Tapatalk 2
Click to expand...
Click to collapse
^^^ This. I ordered the samsung one for 24.99 and it came in yesterday. I'm quite happy with it. Its not huge but its not small either. Hard to miss the sweet spot when putting my N7 on it. Also, its a known brand. My old N7 charger has a 2amp out put so I use that power brick with it and it works flawlessly so far.
I want one that holds the N7 at an angle so you can set up daydream.
Just ordered a MWT03S from the website in the OP. Will report back when it arrives and I have tested
For those of you also interested in ordering, the "S" at the end of the model name means that it has that slick aluminum bezel around the rim. For $2 more, I think it is a great investment :laugh:
RojasTKD said:
Yeah, I just bought a Nokia DT-900 from ebay for $24.99. It's a little more, but I trust Nokia over this brand over the long run.
It looks like I got the last one. The other ebay prices are a bit higher starting at around the mid 30 dollar range.
UPDATE: Just checked and it seem AT&T has the Nokia for $36.75 and free shipping ($49.99 at verizon and Amazon).
Click to expand...
Click to collapse
Just ordered the DT-900, thanks for the heads up!
bobloadmire said:
I want one that holds the N7 at an angle so you can set up daydream.
Click to expand...
Click to collapse
This may be your best option at the moment. Though I read that it only works for charging in horizontal mode (or is it the other way around?).
But for $70, I'd consider one of the cheaper options and bills some kind of a stand myself that I can build out attach the qI charger to.
I don't want to spend a lot of cash on a QI charger especially since we don't yet know who standard is going to win in the end (QI or PAM, other? ).
Just ordered the DT-900, thanks for the heads up!
Click to expand...
Click to collapse
Welcome, mine should arrive in a few days.
anthony.wang said:
Just ordered a MWT03S from the website in the OP. Will report back when it arrives and I have tested
For those of you also interested in ordering, the "S" at the end of the model name means that it has that slick aluminum bezel around the rim. For $2 more, I think it is a great investment :laugh:
Click to expand...
Click to collapse
This one also comes with the 5V 2A adapter, making it the better deal if you don't already have one.
I grabbed the Nokia charger from Dailysteals, but it sucks. It barely charges my Nexus 4 if I keep its clear case on (30% overnight), and it doesn't charge my Nexus 7, even in landscape.
schizox said:
Just ordered the DT-900, thanks for the heads up!
Click to expand...
Click to collapse
When it arrives can you tell us how you like it? I'm thinking about getting one. Thanks!
Would this work with case on? I'm getting the Moko Ultra Slim case.
Sent from my Nexus 7 using Tapatalk 4
menaceinc said:
Would this work with case on? I'm getting the Moko Ultra Slim case.
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
I don't have a case on my N7 yet but on my N4 with this thick case:
http://www.amazon.com/Ionic-GUARDIAN-Armor-Google-Nexus/dp/B00CH61B1C/ref=cm_cr_pr_product_top
it is not a problem and it charges.
bobloadmire said:
I want one that holds the N7 at an angle so you can set up daydream.
Click to expand...
Click to collapse
Just got this(Nokia DT-910) a few minutes ago and am testing it now. My 7 recognizes it in landscape mode no problem and will see how long it takes to charge.
------
Just a heads up, I received the charger mentioned in this post, the 21$ from appydeal.. its total garbage, buy a hockey puck, place your device on it and pray. Will be just about as effective.
It does charge wirelessly but using it the nexus 7 is virtually impossible, you have find the exact spot to place their small puck to charge it.. and even then it charges at a rate of like 5 points per hour. its barely enough to keep at the same battery level with the screen on.
I also have the nexus 4, even with that device being so much smaller i still have to place ti down and shift it around to the exact spot to induce charging..
TLDR: trash, save your money, my guess is the OP works for the site in some way
As the title suggests. I'm looking for a MagNextor-X Adapter seller that ships to Canada.
There was an ebay seller but ebay error shows this seller can't take payments anymore.
There there's the amazon one but doesn't ship to Canada. UGH
I found them on eBay from a California seller who shipped to Canada in less than a week. Ended up costing around c$60 for two of them (discounted shipping on 2nd item).
Wow that's expensive! $30 / each. Guess that's the rip off you have to settle with for living in Canada
or u can just buy it from the company that makes it
http://magnector.com/?product_cat=magnector-x-2
AznDud333 said:
or u can just buy it from the company that makes it
http://magnector.com/?product_cat=magnector-x-2
Click to expand...
Click to collapse
Thanks man, just made the order!!
ChiGGz said:
Wow that's expensive! $30 / each. Guess that's the rip off you have to settle with for living in Canada
Click to expand...
Click to collapse
I had faulty memory - it was actually for 3 units. They arrived. The first one is working fine, haven't gotten to the others yet
ChiGGz said:
Thanks man, just made the order!!
Click to expand...
Click to collapse
Hey, which one did you order? There's two, I'm confused as to what I need/want. Don't have the phone yet.
Any advice? Magnector X adapter or Magnector X cable? (differences?)
squadz said:
Hey, which one did you order? There's two, I'm confused as to what I need/want. Don't have the phone yet.
Any advice? Magnector X adapter or Magnector X cable? (differences?)
Click to expand...
Click to collapse
Please read this:
http://forum.xda-developers.com/showpost.php?p=56096128&postcount=41
As long as you have the adapter you're good I suppose.
Don't buy the magnector. It doesn't fit flush into the charging port on the z3. U had to return mine and buy something off of eBay.
Sent from my D5803 using XDA Free mobile app
90% of what can be purchased on eBay doesn't charge at full speed and has an inferior magnet. I'd simply modify the adapter with a sharp knife or scalpel if if doesn't fit perfectly.
You can try but the thing that doesn't fit is the metal plate between the two charge connectors and I doubt you are going to be able to modify that. Someone posted a link to an official sony magnetic cable in another thread.
Sent from my D5803 using XDA Free mobile app
aaronchi24 said:
Don't buy the magnector. It doesn't fit flush into the charging port on the z3. U had to return mine and buy something off of eBay.
Sent from my D5803 using XDA Free mobile app
Click to expand...
Click to collapse
i got mine this week and it fits perfectly
AznDud333 said:
i got mine this week and it fits perfectly
Click to expand...
Click to collapse
Same
Sent from my D5803 using XDA Premium 4 mobile app
AznDud333 said:
i got mine this week and it fits perfectly
Click to expand...
Click to collapse
CollinsJ said:
Same
Sent from my D5803 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It "Fits" as far as the port snapping into place and charging. However, that's only the metal part, there's also the plastic from the charger that doesn't sit flush against the phone. This allows it to roll up and down and is very weak against this direction of force. So even when just picking up my phone, it slightly disconnects just enough that it stays on, but stops charging until re-seated. These are far from perfect, just acceptable...
ChiGGz said:
It "Fits" as far as the port snapping into place and charging. However, that's only the metal part, there's also the plastic from the charger that doesn't sit flush against the phone. This allows it to roll up and down and is very weak against this direction of force. So even when just picking up my phone, it slightly disconnects just enough that it stays on, but stops charging until re-seated. These are far from perfect, just acceptable...
Click to expand...
Click to collapse
Its a magenet, it charges my phone, is only a issue if I am trying to use it while it is charging which I don't. Works well. Personally planning to use a phone with a magnet stuck to the side isn't something I would expect to work perfectly as it is in the middle of the side of the phone and I would want to hold said phone.
you get similar adapter from ebay (chinese seller) for about 2$.
how can you pay 15$ for such a thing?! ....
Icefeldt said:
you get similar adapter from ebay (chinese seller) for about 2$.
how can you pay 15$ for such a thing?! ....
Click to expand...
Click to collapse
Link please.
And what you're saying is the easy route... People might also say why pay 500$ for a phone when you can get one with almost the same specs for half a price.
You can really say that about almost everything.
Sent from my C6603
Dsteppa said:
Link please.
And what you're saying is the easy route... People might also say why pay 500$ for a phone when you can get one with almost the same specs for half a price.
You can really say that about almost everything.
Sent from my C6603
Click to expand...
Click to collapse
But I am not talking about "almost the same specs" but "exactly the same specs".
e.g.
http://www.ebay.de/itm/191248753745
One End is Micro USB, the other one is the magnetic charger.
Except these cheap adapters usually charge too slow to be useful. I have a pile of different ones lying around here and just one in ten works fine. The Magnector is actually reliable.
I just got mine. And it doesn't seem to charge when put on a Qi pad.
Anyone got one and have it working properly?
(and yes I do know mine is a charging back; has the little contact points and all.)
Contacted LG and they said that there is no compatible quick circle folio case for the G4. And that is it a Verizon market scheme to get you to buy their stuff. I told them about all the official LG stuff on the box (including ORIGINAL LG accessory hologram). Amazing...
I have one from Korea. It might be a knock off but it had the hologram sticker. Charging works fine but I am having some random reboots since I put it on. And the phone is not waking up when I open the case and double tap to wake is fussy. Going to put on my leather on and see if the problem goes away. Between this and Lg screwing me on the promo for the US because I bought an international phone this thing might be on Swappa shortly. Feeling a little but hurt.
Yeah I got a free Quickcircle case with my phone, but it also doesn't work with Qi ><
Infuriating useless conflicting standards...... BETAMAX WAS BETTER DAMN IT!!!
nadram said:
Yeah I got a free Quickcircle case with my phone, but it also doesn't work with Qi ><
Infuriating useless conflicting standards...... BETAMAX WAS BETTER DAMN IT!!!
Click to expand...
Click to collapse
And you got the official LG one that supports wireless charging? Which carrier do you have?
I think there are several cases out there. Some support the wireless charging, and some don't.
But if it doesn't you'll just need to buy the qi sticker to replace it.
xShadoWxDrifTx said:
I think there are several cases out there. Some support the wireless charging, and some don't.
But if it doesn't you'll just need to buy the qi sticker to replace it.
Click to expand...
Click to collapse
This is the one I bought. Clearly it should...
http://www.verizonwireless.com/acce...ick-circle-folio-case-for-lg-g4-violet-black/
RedBullet said:
This is the one I bought. Clearly it should...
http://www.verizonwireless.com/acce...ick-circle-folio-case-for-lg-g4-violet-black/
Click to expand...
Click to collapse
Can I cut the front part of this circle case and put the back door on an existing case?
I have the Verizon G4. I bought the QuickCircle Folio with Powermat+NFC for AT&T models on eBay, thinking that it might work as-is, or else I could swap out the sticker to make it work with Qi. It turns out that it works on my Tylt Qi charger right out of the box! http://www.ebay.com/itm/151704461178
MicroMod777 said:
Can I cut the front part of this circle case and put the back door on an existing case?
Click to expand...
Click to collapse
I am like you ,does anyone have the answer to this ? Is there something on this front cover that would prevent this from working with it being on there , any insight on this would be appreciated thanks
mike_augie said:
I am like you ,does anyone have the answer to this ? Is there something on this front cover that would prevent this from working with it being on there , any insight on this would be appreciated thanks
Click to expand...
Click to collapse
I got those wireless stickers to finally work. Look for that main thread for my fix.
Is anyone else having problems with there folio case. I took mine off and battery life came back, tap to wake works and no more random reboots on my H815 SEA version.
RedBullet said:
And you got the official LG one that supports wireless charging? Which carrier do you have?
Click to expand...
Click to collapse
It is official LG, and it doesn't work with my Qi charger (Tylt Vu) which still works fine with my Nexus 5.
I did not buy this from a carrier, it's the H818P