Hello guys
I rooted my phone recently and I am using CM10.1 since. I wanted to switch to different roms using ROM manager but every time I try it it just reboots back to CM.... idk what to do...
I have an HOX Int trying to switch from CM 10.1 to Nocturnal xi40.
Thanks in advance)
Don't use ROM manager...
1. Download the ROM, extract the boot.img to fastboot folder and copy the rom.zip to your phone.
2. Go to fastboot mode and flash the boot.img via fastboot and then 'fastboot erase cache'.
3. Go to recovery make a full wipe...(Data/cache/dalvic)
4. Now flash the ROM.zip from recovery.
5. Reboot!
Follow these steps every time you flash a new ROM!
vin4yak said:
Don't use ROM manager...
1. Download the ROM, extract the boot.img to fastboot folder and copy the rom.zip to your phone.
2. Go to fastboot mode and flash the boot.img via fastboot and then 'fastboot erase cache'.
3. Go to recovery make a full wipe...(Data/cache/dalvic)
4. Now flash the ROM.zip from recovery.
5. Reboot!
Follow these steps every time you flash a new ROM!
Click to expand...
Click to collapse
Thanks!
as I said im new in this and i dont know the commands yet can u please explain them for me? I would very appreciate it!
shahafdive said:
Thanks!
as I said im new in this and i dont know the commands yet can u please explain them for me? I would very appreciate it!
Click to expand...
Click to collapse
Do you have the latest HTC Sync drivers and fastboot folder? IF no, then here are the links:
HTC Sync Manager: http://www.htc.com/www/support/software/htc-sync-manager.aspx
Fastboot folder; http://d-h.st/8Jr
1. Flash boot.img (make sure your in fastboot mode)
Code:
fastboot flash boot boot.img
fastboot erase cache
2. Go to recovery and flash wipe data/cache/dalvic
3. From recovery>Install zip from sd>select zip>Navigate to the rom.zip and install it.
4. Install the Gapps if required...
5. Reboot.
vin4yak said:
Do you have the latest HTC Sync drivers and fastboot folder? IF no, then here are the links:
HTC Sync Manager: http://www.htc.com/www/support/software/htc-sync-manager.aspx
Fastboot folder; http://d-h.st/8Jr
1. Flash boot.img (make sure your in fastboot mode)
Code:
fastboot flash boot boot.img
fastboot erase cache
2. Go to recovery and flash wipe data/cache/dalvic
3. From recovery>Install zip from sd>select zip>Navigate to the rom.zip and install it.
4. Install the Gapps if required...
5. Reboot.
Click to expand...
Click to collapse
I am having trouble with copying the rom.zip to my sd card. my computer wont recognize it so i cant just use the "Send to" option and when i use adb push it says device not found...
help please?
shahafdive said:
I am having trouble with copying the rom.zip to my sd card. my computer wont recognize it so i cant just use the "Send to" option and when i use adb push it says device not found...
help please?
Click to expand...
Click to collapse
Go to recovery>Mounts n storage>Mount USB
Now copy the ROM.zip file to your phone! and gapps.zip if necessary...
vin4yak said:
Go to recovery>Mounts n storage>Mount USB
Now copy the ROM.zip file to your phone! and gapps.zip if necessary...
Click to expand...
Click to collapse
it says unable to open ums lunfile(no such file or directory)
also when i try to push the rom it says device not found and when i try adb devices the list is empty
Flash a newer recovery. Yours is to old
http://db.tt/z07vyksQ
Mr Hofs said:
Flash a newer recovery. Yours is to old
http://db.tt/z07vyksQ
Click to expand...
Click to collapse
after i flashed the recovery you gave me and i used fastboot reboot it just gets stuck on the htc logo.
Flashed the recovery
Fastboot flash recovery recovery.img (rename it to recovery.img)
Fastboot erase cache
Flashing a recovery will not mess up the actual working rom !
Mr Hofs said:
Flashed the recovery
Fastboot flash recovery recovery.img (rename it to recovery.img)
Fastboot erase cache
Flashing a recovery will not mess up the actual working rom !
Click to expand...
Click to collapse
after erasing cache what to do? fastboot reboot?
Yes you can.
Mr Hofs said:
Flashed the recovery
Fastboot flash recovery recovery.img (rename it to recovery.img)
Fastboot erase cache
Flashing a recovery will not mess up the actual working rom !
Click to expand...
Click to collapse
I flashed the recovery successfully but what new? tried the "Mount usb" option but it just gives me 2 options "Go back" or "Unmount"....
Leave it on that screen and hook up the usb cable....wait......wait.....and it should pop up eventually
Mr Hofs said:
Leave it on that screen and hook up the usb cable....wait......wait.....and it should pop up eventually
Click to expand...
Click to collapse
10 minutes and still counting... nothing happened.
Don't know what you did the first time ? Try this one then
http://db.tt/Krlm4dPs
Rename it to recovery.img
Fastboot erase cache
Fastboot flash recovery recovery.img
Fastboot erase cache
It must work. Otherwise there is something with the phone. Or you messed up a command somewhere ?
Mr Hofs said:
Don't know what you did the first time ? Try this one then
http://db.tt/Krlm4dPs
Rename it to recovery.img
Fastboot erase cache
Fastboot flash recovery recovery.img
Fastboot erase cache
It must work. Otherwise there is something with the phone. Or you messed up a command somewhere ?
Click to expand...
Click to collapse
I did what you told me and im still stuck on htc logo... on the "Mounts and storag" menu it only has the option of go back nad unmount...
I dont care if i need to switch back to any other rom, even go back to stock and unrooted. i just want to be abe to use the phone
I know what you mean but mount as usb drive must work. Do you use the original HTC usb cable ? Are you using a direct usb 2.0 port on the pc ?
And if you see the : unmount and go back text you are in the mounting menu, at that point the sdcard is being mounted ! Don't tap "go back" or "unmount"
Mr Hofs said:
I know what you mean but mount as usb drive must work. Do you use the original HTC usb cable ? Are you using a direct usb 2.0 port on the pc ?
And if you see the : unmount and go back text you are in the mounting menu, at that point the sdcard is being mounted ! Don't tap "go back" or "unmount"
Click to expand...
Click to collapse
Im using the HTC cable and i tried it with every port. (can it be 3.0?)... if you cant think of anything else can you please guide me to a stock situation? guide me to make it back to stock?
Give me the outcome of this fastboot command
Fastboot getvar version-main
Related
i was flashing the cm 10 on my htc one x but i didnt notice that battery was low...so it went off in the middle of flashing.
so when i plug in the charger and booted it....it got stuck in the booting logo...
then again i went to the bootloader and select recovery i.e. cwm but to my bad luck somehow accidently i wiped the internal storage so now my whole phone is emppty....there is no rom in inernal storage that can be flashed through cwm..please help..is there any way to flash the stock or custom rom..please help...
Mount your SD card in cwm and put the ROM on it that way
Sent like a boss from my HTC one X
nothing is happening
nothing is happening my pc is not detecting the phone.......please provide proper instructions
Power and volume down to getvto bootloader and then go to recovery, and then storage and mounts, mount as as usb, copy the ROM on, flash it, then clear cache and dalvik cache, drop to fastboot and flash boot.img.
BenPope said:
Power and volume down to getvto bootloader and then go to recovery, and then storage and mounts, mount as as usb, copy the ROM on, flash it, then clear cache and dalvik cache, drop to fastboot and flash boot.img.
Click to expand...
Click to collapse
i have done all this but the problem is my laptop is not detecting the phone i also have all the drivers instaled
BenPope said:
Power and volume down to getvto bootloader and then go to recovery, and then storage and mounts, mount as as usb, copy the ROM on, flash it, then clear cache and dalvik cache, drop to fastboot and flash boot.img.
Click to expand...
Click to collapse
okk i mouned it as sdcard nothing happened.....but on mounting it as usb it is showing error"unable to open ums lunfile(no such file or directory exist)"
vikasgarg said:
okk i mouned it as sdcard nothing happened.....but on mounting it as usb it is showing error"unable to open ums lunfile(no such file or directory exist)"
Click to expand...
Click to collapse
You need to upgrade to CWM from the last 7 months, i.e., 5.8.4.0, you have a very old one.
This is the one
http://db.tt/Krlm4dPs
BenPope said:
You need to upgrade to CWM from the last 7 months, i.e., 5.8.4.0, you have a very old one.
Click to expand...
Click to collapse
but i cant do that....to upgrade that also i need to first
What? Boot to hboot and then drop to fastboot and flash it.
Yep just flash it, rename the file i gave you to recovery.img and copy it to your fastboot folder
Drop in fastboot usb mode (like Ben said)
And flash it
Fastboot flash recovery recovery.img
Fastboot erase cache
Now boot into recovery and mount or as a usb drive again
Mr Hofs said:
Yep just flash it, rename the file i gave you to recovery.img and copy it to your fastboot folder
Drop in fastboot usb mode (like Ben said)
And flash it
Fastboot flash recovery recovery.img
Fastboot erase cache
Now boot into recovery and mount or as a usb drive again
Click to expand...
Click to collapse
Done. Now I'm reflashing the officail cm 10...but i dont know about the kernel or boot. img....
as far as i know first i have to flash cm 10 and gapps via cwm then i have to flash boot.img with the help of fastboot.....so could u please give me a link of the latest boot. img... and correct me if i am wrong about the procedure......sorry i am noob........and thanks a lot u save my life/.....
First flash the boot.img and then flash the rom and gapps.
Boot.img depends on what hboot you are, what is yours ?
Mr Hofs said:
First flash the boot.img and then flash the rom and gapps.
Boot.img depends on what hboot you are, what is yours ?
Click to expand...
Click to collapse
1.36.0000
Then you need this boot.img
http://db.tt/uDdWaAtH
:thumbup:
Hi Everyone,
I was trying to install the vemon viper x 3.3.6 (Im kind of new to flashing rom onto phones) onto my htc one x and had to update my hboot from 0.98 to 1.31 which i did with JBW tool and worked perfect and i unlocked my bootloader again but wen i was finished unlocking my bootloader i accendently factory reset my phone so it removed the vemon viper x 3.3.6 zip folder off my phone and cant run my old rom which is the vemon viper x 2.7 as it isnt a jellybean rom. So when i start my phone it loads the rom but doesn't boot. All i can get into is my hboot. My htc one x is s-on as well. Please any help would be great.
Flash a recovery, mount usb storage, copy rom to phone and flash it.
TToivanen said:
Flash a recovery, mount usb storage, copy rom to phone and flash it.
Click to expand...
Click to collapse
I flashed clockworkmod recovery onto my phone but i cant get into my phone to use the usb storage option to copy the rom onto my phone.
enter the bootloader by pressing volume - and the power button together as long as you are in the bootloader, do not let go before that.....then navigate to HBOOT - RECOVERY. it boots to recovery and activate the mount as mass storage device in the mounts and storage section (if you have CWM) if you get an error by doing that i suggest you flash the latest CWM recovery 5.8.4.0 first. older ones dont have this option !
Mr Hofs said:
enter the bootloader by pressing volume - and the power button together as long as you are in the bootloader, do not let go before that.....then navigate to HBOOT - RECOVERY. it boots to recovery and activate the mount as mass storage device in the mounts and storage section (if you have CWM) if you get an error by doing that i suggest you flash the latest CWM recovery 5.8.4.0 first. older ones dont have this option !
Click to expand...
Click to collapse
I will giv it a go, thanks for your help
rwhelan said:
I will giv it a go, thanks for your help[/QUO[/I]
I have noticed when it loads hboot it says my usb master mode cannot be accessed and asks to remove my usb cable, what does that mean??? I installed the vemon viper x rom through recovery on my fone but it keeps bring up the hboot when i turn on my fone it does booth into my fone at all and my recovery doesnt appear when i go into it just goes black booths back into my hboot. does anyone know whats going on and what should i do ( i am a bit of a noob when it comes to these things)????
Click to expand...
Click to collapse
rwhelan said:
rwhelan said:
I will giv it a go, thanks for your help[/QUO[/I]
I have noticed when it loads hboot it says my usb master mode cannot be accessed and asks to remove my usb cable, what does that mean??? I installed the vemon viper x rom through recovery on my fone but it keeps bring up the hboot when i turn on my fone it does booth into my fone at all and my recovery doesnt appear when i go into it just goes black booths back into my hboot. does anyone know whats going on and what should i do ( i am a bit of a noob when it comes to these things)????
Click to expand...
Click to collapse
That notification is normal, we all have that due to the usb cable being connected !
Did you install the rom with the cable connected ? That's a no go......always install a rom without the usb connected ! First put the phone into the bootloader, hold power and volume - until you are in. Then the fastboot command
Fastboot erase cache
From this point you disconnect the cable. enter the recovery and re-install the viper rom again.
You did flash the boot.img from the rom right ?
Click to expand...
Click to collapse
Mr Hofs said:
rwhelan said:
That notification is normal, we all have that due to the usb cable being connected !
Did you install the rom with the cable connected ? That's a no go......always install a rom without the usb connected ! First put the phone into the bootloader, hold power and volume - until you are in. Then the fastboot command
Fastboot erase cache
From this point you disconnect the cable. enter the recovery and re-install the viper rom again.
You did flash the boot.img from the rom right ?
Click to expand...
Click to collapse
It couldn't fastboot the boot.img file so decided to install it from recovery i see now that was a bit of a mistake. I will " fastboot erase cache" and fastboot the boot.img. Hope for the best
Click to expand...
Click to collapse
You need to flash the boot.img file just like a recovery . Boot.img file in the fastboot folder
In the command window
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Then unhook the cable
Enter recovery and install the rom. And for the kernel question you answer with option 1.viper x delivered !
Mr Hofs said:
You need to flash the boot.img file just like a recovery . Boot.img file in the fastboot folder
In the command window
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Then unhook the cable
Enter recovery and install the rom. And for the kernel question you answer with option 1.viper x delivered !
Click to expand...
Click to collapse
I have one last big problem, my phone is on a boot loop after trying to install my rom from recovery and the battery is too low so it wont allow me to flash anything onto my phone. What can i do???
can you still enter the recovery ? if so....put the phone in the recovery and put it on the wallcharger, then you select 1 time REBOOT RECOVERY and let it sit there. it will charge up !
Mr Hofs said:
can you still enter the recovery ? if so....put the phone in the recovery and put it on the wallcharger, then you select 1 time REBOOT RECOVERY and let it sit there. it will charge up ![/QUI
I cant get into the recovery. Is there anything i can do??
Click to expand...
Click to collapse
Yes put the phone in the bootloader and put this script in the fastboot folder. Open a command window there and type
Batt script.bat
http://db.tt/aLqeTpPO
It will continuesly reboot the bootloader and charge the phone little by little ! Until you got some power and can acces the custom recovery to charge it more !
If it does not work, remove the space in batt script.bat so it says battscript.bat .....
Mr Hofs said:
Yes put the phone in the bootloader and put this script in the fastboot folder. Open a command window there and type
Batt script.bat
http://db.tt/aLqeTpPO
It will continuesly reboot the bootloader and charge the phone little by little ! Until you got some power and can acces the custom recovery to charge it more !
If it does not work, remove the space in batt script.bat so it says battscript.bat .....
Click to expand...
Click to collapse
I am going to sound very stupid. Could you give me the exact line of command to use if the fastboot folder is saved in the local storage on the computer (c: drive), i dont want to do more damage then i have.:silly:
Example when the fastboot files are in
C:\fastboot\the fastboot files
Then you copy that battscript into that folder
Then you navigate to that folder and hold down shift and right click the mouse inside that folder, then choose "open command prompt here"
In that command prompt you type
Battscript.bat (hit enter)
And the phone should start rebooting.
If the fastboot folder is somewhere else you repeat my steps only change folder that i used.....
Mr Hofs said:
Example when the fastboot files are in
C:\fastboot\the fastboot files
Then you copy that battscript into that folder
Then you navigate to that folder and hold down shift and right click the mouse inside that folder, then choose "open command prompt here"
In that command prompt you type
Battscript.bat (hit enter)
And the phone should start rebooting.
If the fastboot folder is somewhere else you repeat my steps only change folder that i used.....
Click to expand...
Click to collapse
The file worked perfectly just opened it in the fastboot files and left it run all night. Then fastboot erase cache and the recovery is back up and running just have to flash the boot.img and phone up and running. Thanks for your help.
No problem. Glad its sorted !
I was following this guide with the intention of installing Cyanogenmod on to my HTC One X (international version), and I got as far as the Flashing a ROM section, towards the bottom, when I reached step 5, which reads "Make sure you already have your shiny new ROM .zip on your internal memory as you cannot enable mass storage in the current recovery builds."
At this point I realised I had not done this, and I have no way of putting the ROM onto the phone. Is there anything I can do, or do I have to start from scratch, and if so, how do I do that?
I'm following this guide regarding installing the ROM, but is there a better one? That guy cannot spell.
I also have this thread open for CM10.1, but it's quite confusing. Should I be downloading the following?: Beta 7 (pure JB vendor): http://d-h.st/fo4 - Kernel 3.1.10 included.
Thanks in advance.
ashleynicholson said:
I was following this guide with the intention of installing Cyanogenmod on to my HTC One X (international version), and I got as far as the Flashing a ROM section, towards the bottom, when I reached step 5, which reads "Make sure you already have your shiny new ROM .zip on your internal memory as you cannot enable mass storage in the current recovery builds."
At this point I realised I had not done this, and I have no way of putting the ROM onto the phone. Is there anything I can do, or do I have to start from scratch, and if so, how do I do that?
I'm following this guide regarding installing the ROM, but is there a better one? That guy cannot spell.
I also have this thread open for CM10.1, but it's quite confusing. Should I be downloading the following?: Beta 7 (pure JB vendor): http://d-h.st/fo4 - Kernel 3.1.10 included.
Thanks in advance.
Click to expand...
Click to collapse
have you already installed the custom recovery?
matt95 said:
have you already installed the custom recovery?
Click to expand...
Click to collapse
Yes, and "backed up." I don't know what I've backed up, but I've backed up something. I have not wiped anything, and I still appear to have a functional phone.
you probably backed up the stock rom however to push the rom onto your phone you should go into recovery and mount USB and the put the rom onto the sdcard that's it...
matt95 said:
you probably backed up the stock rom however to push the rom onto your phone you should go into recovery and mount USB and the put the rom onto the sdcard that's it...
Click to expand...
Click to collapse
How do I mount USB? When I plug my phone in I just get weird tethering options.
ashleynicholson said:
How do I mount USB? When I plug my phone in I just get weird tethering options.
Click to expand...
Click to collapse
you need to go into recovery and there is an option for mounting partitions
matt95 said:
you need to go into recovery and there is an option for mounting partitions
Click to expand...
Click to collapse
Do I just place the file in the main folder, or does it go somewhere specific? Thanks for your help by the way.
You can mount it inside the recovery as a diskdrive and yes you need that cm10.1 + gapps if you want them too. Mount it and copy the rom and gapps to it
Here is a small tut i wrote earlier. ...
This counts for recovery cwm 5.8.4.0 (otherwise a full wipe in any other recovery must be done)
In recovery
Wipe data/factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts and storage - format cache,data,system
Remove the cable to the pc before installing the rom !
Then install CM10.1 after that GAPPS.....DO NOT REBOOT
Reconnect the cable and ......
type in the fastboot command window
Adb reboot bootloader
Fastboot erase cache
Fastboot flash boot boot.img (the file from the rom)
Fastboot erase cache
Fastboot reboot
Mr Hofs said:
You can mount it inside the recovery as a diskdrive and yes you need that cm10.1 + gapps if you want them too. Mount it and copy the rom and gapps to it
Here is a small tut i wrote earlier. ...
This counts for recovery cwm 5.8.4.0 (otherwise a full wipe in any other recovery must be done)
In recovery
Wipe data/factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts and storage - format cache,data,system
Remove the cable to the pc before installing the rom !
Then install CM10.1 after that GAPPS.....DO NOT REBOOT
Reconnect the cable and ......
type in the fastboot command window
Adb reboot bootloader
Fastboot erase cache
Fastboot flash boot boot.img (the file from the rom)
Fastboot erase cache
Fastboot reboot
Click to expand...
Click to collapse
Thanks for your comprehensive reply dude. Does the gapps (Google Apps I assume?) include Google Now? I'd become quite accustomed to that particular gadget and I will miss it.
Actually i have to guess yes.....i never tried it !
Ow and my apology to matt for barging in like this......
Mr Hofs said:
Actually i have to guess yes.....i never tried it !
Ow and my apology to matt for barging in like this......
Click to expand...
Click to collapse
Ok, once this gapps is downloaded I am good to go I think. If I brick it I can just break it and claim it on the insurance. Although this phone is brand new because my old one drowned a couple weeks ago, so they mightn't like two claims in such quick succession.
yeah gapps have google now too
matt95 said:
yeah gapps have google now too
Click to expand...
Click to collapse
One more question guys, and this is where I possibly reveal how idiotic I am...
How do I install the ROM? I have the two files on the storage (in unzipped folders), but how do I install them?
ashleynicholson said:
One more question guys, and this is where I possibly reveal how idiotic I am...
How do I install the ROM? I have the two files on the storage (in unzipped folders), but how do I install them?
Click to expand...
Click to collapse
you need the cm10.1 rom.zip and the gapps.zip... go into recovery choose .zip and select the rom.zip first, after that install the gapps.zip following the same steps before... then reboot and enjoy the rom
matt95 said:
you need the cm10.1 rom.zip and the gapps.zip... go into recovery choose .zip and select the rom.zip first, after that install the gapps.zip following the same steps before... then reboot and enjoy the rom
Click to expand...
Click to collapse
Got it.
Can you explain the second half of your instructions please?
[quotetype in the fastboot command window
Adb reboot bootloader
Fastboot erase cache
Fastboot flash boot boot.img (the file from the rom)
Fastboot erase cache
Fastboot reboot[/quote]
Well you have a certain folder on the pc....from where you also flashed the recovery ? It contains fastboot.exe and adb.exe files ....right? You open the cm10.1.zip file and you see the boot.img file in there, you copy that to the fastboot folder on the pc and flash it
ashleynicholson said:
Got it.
Can you explain the second half of your instructions please?
[quotetype in the fastboot command window
Adb reboot bootloader
Fastboot erase cache
Fastboot flash boot boot.img (the file from the rom)
Fastboot erase cache
Fastboot reboot
Click to expand...
Click to collapse
[/QUOTE]
oh yeah forgot about that sorry...
before going into recovery you should go into fastboot mode, connect the phone to your computer and type those command in the terminal/cmd, the boot.img file can be easily found in the cm10.1 thread or in the rom.zip... after that install the rom following the steps above...
Mr Hofs said:
Well you have a certain folder on the pc....from where you also flashed the recovery ? It contains fastboot.exe and adb.exe files ....right? You open the cm10.1.zip file and you see the boot.img file in there, you copy that to the fastboot folder on the pc and flash it
Click to expand...
Click to collapse
I'm on a Mac, so the guide said I only needed the fastboot file, not the adb one. What do you mean "flash it"?
I've rebooted the phone as you said, but it just says "Unfortunately, the process com.android.phone has stopped." I click Ok and it says that again.
ashleynicholson said:
I'm on a Mac, so the guide said I only needed the fastboot file, not the adb one. What do you mean "flash it"?
I've rebooted the phone as you said, but it just says "Unfortunately, the process com.android.phone has stopped." I click Ok and it says that again.
Click to expand...
Click to collapse
fastboot mode: power off the phone, power+vol down, select fastboot and press power, you're done
You can go in the bootloader first and flash the boot.img. I described it the other way around because you end with a cache erase to avoid boot problems (got this from the thread itself)
Basically it comes down to this
You put the phone in the bootloader and you see a red text that says "fastboot usb"
At that point you flash the boot.img from the mac to the phone.
Then you unhook the cable and do the rest of the guide
Hello, I was flashing the latest version of ViperX and it wouldn't boot so I decided to reinstall. After reinstalling I updated my hboot to the latest version and was told to erase everything such as cache, system, dalvik etc. It deleted my backups, I have lost ClockWorkMod on my phone and ADB wont detect it. I also have no rom on my phone as of now, I think I could fix it if I could get ADB to detect the phone. When I plug my phone into the computer it detects it as a HTC but when I type "adb devices" I get nothing coming up
Could someone suggest something to fix it?
Hold your volume - and the power button together until you see the bootloader !
Is the bootloader unlocked ? And what version do you have now ?
Unlock the bootloader if its relocked. Put the unlock code.bin file in the fastboot folder and flash it
Fastboot flash unlocktoken unlock_code.bin
Download this file and place it in your fastboot folder, rename it to recovery.img and flash it
http://db.tt/S74XQEtu
Fastboot flash recovery recovery.img
Fastboot erase cache
Mr Hofs said:
Hold your volume - and the power button together until you see the bootloader !
Is the bootloader unlocked ? And what version do you have now ?
Click to expand...
Click to collapse
I was about to add this extra information. I've updated my bootloader and its been relocked, its at version 1.39
derp
Thanks for the help guys, it spontaneously worked
So you got viper x up and running ?
Mr Hofs said:
So you got viper x up and running ?
Click to expand...
Click to collapse
Well I'm getting there.
I've reinstalled CWM and I'm looking to install the ROM now but it has been deleted from my SD card, either that or my sd isn't working.
Is there a way to access my sd card without a ROM Wmaybe install and flash without using the "choose zip from sdcard" option?
When I press "choose zip from sdcard" it says "No files found."
What do I do now?
Select mounts and storage and mount usb storage.
(if you get an error (ums) DL this: http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-5.8.4.0-endeavoru.img fastboot flash recovery recovery.img)
Then copy the viper x rom to the sdcard.
Make a full wipe in the recovery
Factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts & storage - format cache, system, data
Then install the rom.....do not reboot if you did not flash the boot.img
Type in the commond prompt
Adb reboot bootloader
Then flash the boot.img from the viper x rom, found inside the rom.zip !
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Fastboot reboot
If you already flashed the boot.img you can skip the last part
TToivanen said:
Select mounts and storage and mount usb storage.
(if you get an error (ums) DL this: http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-5.8.4.0-endeavoru.img fastboot flash recovery recovery.img)
Click to expand...
Click to collapse
Thanks, that solves the error. How can I add a rom to the sd card without a rom present? I need to access the zip files to install it
Mr Hofs said:
Then copy the viper x rom to the sdcard.
Make a full wipe in the recovery
Factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts & storage - format cache, system, data
Then install the rom.....do not reboot if you did not flash the boot.img
Type in the commond prompt
Adb reboot bootloader
Then flash the boot.img from the viper x rom, found inside the rom.zip !
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Fastboot reboot
If you already flashed the boot.img you can skip the last part
Click to expand...
Click to collapse
This may be a stupid question but how to I get the rom on the sd card?
Select mounts and storage inside the recovery and then mount as mass storage device .....last option of the list
Connect usb cable (obvious) and it pops up on your pc. Then just copy it over.
TToivanen said:
Connect usb cable (obvious) and it pops up on your pc. Then just copy it over.
Click to expand...
Click to collapse
Thats it all sorted and working, thanks guys!
Finally ! ....... TT ?
No problem! Now I shall say...
CASE CLOSED
sent from my nokia 6700 classic
TToivanen said:
No problem! Now I shall say...
CASE CLOSED
sent from my nokia 6700 classic
Click to expand...
Click to collapse
LOL ! you forgot to
I recently installed cyanogenmod 10.1 onto my htc one x and it installed fine the problem is, I forgot to install gapps and now my phone is stuck saying this message: "com.android.phone has unexpectedly stopped" the thing is, I can't use my phone for anything i can't even flash back because for some reason my phone deleted the stock rom backup I had this has also stopped it ffrom connecting to the computer so i can't access files or anything I can only access the stock hboot thing and CWMR any help would be appreciated
Flash the boot.img from cm10 rom, make a full wipe in recovery and install cm10 rom.zip and then gapps ..... reboot and it probably will be fine !
Mr Hofs said:
Flash the boot.img from cm10 rom, make a full wipe in recovery and install cm10 rom.zip and then gapps ..... reboot and it probably will be fine !
Click to expand...
Click to collapse
Sorryif this a nooby question but just where do i find this boot.img?
Inside the rom.zip, open the file with lets say 7zip and copy out the boot.img file and flash it with either fastboot commands or with a flash tool to the phone in fastboot usb mode
Mr Hofs said:
Inside the rom.zip, open the file with lets say 7zip and copy out the boot.img file and flash it with either fastboot commands or with a flash tool to the phone in fastboot usb mode
Click to expand...
Click to collapse
But i cant access the phone using the computer it doesnt oick it up it plays the noise but in only installs the my HTC drivers and the phone drivers but theres a driver calles Android phone that hasnt installed if theres any way to open the zip through CWMR then i could be able to use it thans for the contribution though
Well the phone should say "MYHTC" in the devicemanager.
Try this driver as it always worked for me
http://db.tt/gXVxa3Dp
Mr Hofs said:
Well the phone should say "MYHTC" in the devicemanager.
Try this driver as it always worked for me
http://db.tt/gXVxa3Dp
Click to expand...
Click to collapse
Sorry for the late reply I haven't got around to doing that method but when i do i shall do your method BTW so should i flash the boot.img like ajy other rom?
fader910 said:
Sorry for the late reply I haven't got around to doing that method but when i do i shall do your method BTW so should i flash the boot.img like ajy other rom?
Click to expand...
Click to collapse
no you flash the boot.img to the phone that is in the bootloader. put the boot.img into the fastboot folder on the pc, open a command window inside that folder and flash it
fastboot flash boot boot.img
fastboot erase cache
then enter the recovery and do the steps i wrote earlier
Mr Hofs said:
no you flash the boot.img to the phone that is in the bootloader. put the boot.img into the fastboot folder on the pc, open a command window inside that folder and flash it
fastboot flash boot boot.img
fastboot erase cache
then enter the recovery and do the steps i wrote earlier
Click to expand...
Click to collapse
but i dont have gapps on my phone so i cant flash it is there a way to flash it from your computer
fader910 said:
but i dont have gapps on my phone so i cant flash it is there a way to flash it from your computer
Click to expand...
Click to collapse
Enter the recovery and mount the sdcard as a mass storage device, under the mounts and storage menu. Then copy the gapps to the phone !
Mr Hofs said:
no you flash the boot.img to the phone that is in the bootloader. put the boot.img into the fastboot folder on the pc, open a command window inside that folder and flash it
fastboot flash boot boot.img
fastboot erase cache
then enter the recovery and do the steps i wrote earlier
Click to expand...
Click to collapse
Yes it worked!!! you are amazing thanks alot
Ah nice finally good results. Enjoy CM !
CASE CLOSED !