Related
So what do people recommend as the best screen protectors to choose from for the MT4G?
I know everyone has their own opinions on them, but I'm hoping people can post their pros/cons and we can help us all narrow down the choice to a few.
Thanks!
the phantom skinz screen protector! pros: clear, nice feel, covers the whole front. cons: none if installed correctly.
I like the Reallook one. Clear, durable and feels like the glass.
I had the realook and phantom skinz. I settled on phantom skinz. I have the full body matte, plus clear phantom skinz. (Don't install the matte screen protector from PS).
Realook is very good with clear BUT the only thing that sucks is that you get ALOT of oils/fingerprints, etc on it. Easy install and easy clean with soap/water.
Phantom skinz gets oil on the screen too, but not as much. Screen surface is alittle "gummy". (Orange peel is very little to non existant). Watch out as the adhesive backing will attract lint (during installation) and you WILL not be able to get that off. PS also has lifetime warranty = unlimited screen protector replacements. (got the whole kit for $12 during 50% off cyber monday).
Don't bother getting invisible shield, they suck and give you orange peel, and it's thick.
@Jaylito,
Did you notice any kind of cloudiness after you cleaned your screen with alchol/towel? (assuming you've cleaned your screen with alcohol/water) For some reason, mine clouded up on the top.
yeah I have. I guess it's normal tho. goes away if u keep rubbing the screen back & fourth with ur thumb. guess since the material... if it gets wet, it'll cloud a bit cause the moisture seeps thru the inside but it'll dry out bro.
guess I have to do more rubbing then cause it's still cloudy...
oh well....
I tried PhantomSkinz and that was a pain to put on (w/ water and soap), Realook was easy and it didn't peel at the edges.
Zagg Invisishield. Lifetime Warranty.
realook, hands down.
pros: crystal clear, feels like the glass itself, easy to clean, easy to apply, easy to reapply.
cons: a little expensive ($10 for 2, but its totally worth it)
MT4G_Slave said:
I tried PhantomSkinz and that was a pain to put on (w/ water and soap), Realook was easy and it didn't peel at the edges.
Click to expand...
Click to collapse
Weird... for me, PS was MUCH EASIER than realook.
PS allows movement up/down/left/right with ease, and then you just squeeze out water.
For realook, it sucked to align the edges cause you can't move the film once you've "stickered" it on. Then you have to peel it back off and realign, causing lint (in my case) to adhere, and then I have to clean it again.
For me the realook was the best by far. I tried a couple of the wet app kind like invisishield and clear freak on the 4 mt4gs that I had and the realook was the best. I agree its a pain to put on, especially if you have animals because of dust and hair, but if you apply it in the bathroom after letting it steam up from the shower, I've found I can get it on without too much dust or hair falling on the screen. Also, get some extra scotch tape and place it on the front of the realook screen to keep your fingers off the adhesive side while applying it. Another nice thing is that each protector comes with two dots to apply to the camera lens in the back.
The only bad thing is that I think the realook attracts fingerprint grease worse than the wet app kind.
I have a zagg on my nexus s mostly because its all that's out right now and will put a realook on as soon as they are available.
Sent from my Nexus S using XDA App
The Boxwave screen protectores look pretty good too, though I've never tried one myself.
Ghost Armor. Just added it today on my 4G n its cut to fit perfectly, including the sensors n camera. FEELS like the real glass n doesn't take away from the display like the ones Tmo sales. Avoid those *****es like the plague.
I used Zagg for my Nexus S.
I get generic ones from a guy named lcd-protectors on ebay, 5 for $3.50. They're the stiff kind with two protective layers that you peel off, one before you apply and one after. I'm too cheap to pay more.
i just ordered a full body cover kit from stealthguards.com
choosing the clear type and none of the colored ones, it was $2.85 (full body protection, just pay shipping)
$2.85 sure beats dishing out $25 for zagg which is the same crap.
What do you need a screen protector for? I haven't used a screen protector since I bought the G1 at launch, and I've never had a screen scratch. Keys in my pockets, etc. Never been a problem. These screens are incredibly scratch resistant.
I love these screen protectors that I bought on Amazon. Perfect on the first try with no bubbles! Check it out here: http://www.amazon.com/gp/aw/d/B004E49TEG/ref=mp_s_a_1?qid=1294786757&sr=8-1:
BoxWare screen protector is well IDK how to rate it as it is just regular. What I did not like about it was it does "NOT" fully cover the screen as you have little gap very small which bugs me as I am neat. The feeling right now is artificial as I can tell it is there maybe cuz its still new as I applied it just 2hours ago. So lets wait and see how it turns out in long run.
I grabbed a Reallook screen protector off of amazon:
Pros: The feel and clarity are great
Cons: The cut. It has a cutout for the FFC and leaves a fair bit of space on all sides (as a result it's easy to get on) but it's really short on all sides in my opinion.
Part Four said:
What do you need a screen protector for? I haven't used a screen protector since I bought the G1 at launch, and I've never had a screen scratch. Keys in my pockets, etc. Never been a problem. These screens are incredibly scratch resistant.
Click to expand...
Click to collapse
Tell that to the scratch in my screen that I got the first day of having the phone... yeah, needless to say, I have a screen protector now and its helped a lot.
Sent from my HTC Glacier using XDA App
Just want to let you know that I don’t work or am I affiliated with XO Skins in any way.
So I have had this on my Tab ever since I got it and am very happy with my purchase so I thought I would give a review for others that are looking for a good screen protector.
Before I even go into the review, I just wanted to post my thoughts on the argument for Gorilla Glass. I have been unable to find any proof that Gorilla Glass is present on this device, but even if it is, I still recommend a screen protector. Gorilla Glass is not made of diamonds therefore can be scratched by materials that are simply harder then it. Why spend $600 on a device and leave the most vulnerable part of it open to scratches and whatever else is out there? People also say that it is not like a phone so it won’t be in and out of pockets, etc, but I myself do not want to take the risk on such an expensive device. Anyways, that’s my 2 cents, and now onto the review.
I bought it through their website for $24.95 on a Friday, and received it on Monday. I did do rush shipping just because I knew my Tab was coming that Tuesday and I wanted to make sure I had a screen protector for it once I got it. It came in a padded envelope with just the XO Skins general box inside the envelope. In the box was the screen protector rolled up, a bottle of their installation spray, a squeegee, and installation instructions.
The instructions were detailed and easy to follow, however I would recommend using a micro fiber cloth(not included) whenever you clean your device instead of a dry paper towel like they recommend. I found the Skinomi installation video to be very helpful since the screen protectors are made out of similar/if not the same material.
http://youtu.be/SKKZwzhFmfA
I recommend doing the installation in your bathroom where you can get some hot water running for a few minutes. This steams up the room and helps prevent dust and other crap from getting under your screen protector when you install it. Also, don’t be afraid to be generous with the application spray when spraying the screen protector and make sure to keep the squeegee wet when you are using it to get rid of the excess solution. Don’t worry if yours comes out milky or with a few bubbles, those will go away once the solution dries and cures completely. Overall though, the installation is quite easy and took me only a few minutes. I am a perfectionist and since this is a wet installation you can move the screen protector around until it is exactly where you want it which is nice. I let it dry in the original SGT box for a full 24 hours and it came out perfect.
It honestly feels almost exactly like glass when you are sliding your finger across it which was something I was worried about before ordering it. In the past I have tried the Zagg invisibleSHIELD and hated how it felt sticky and had what is known as the orange peel affect. I believe they are made of similar quality materials but the XO skins produces none of the negative effects that I found present with the Zagg protector. It doesn’t feel sticky and I have found no problems with the clarity or viewing angle. I also haven’t noticed any problems with the touch screen not registering my touches as well. It also does collect finger prints and smudges, but it is not nearly as bad as just plain glass. It is easily wiped down with a microfiber cloth though.
Overall, I highly recommend the XO Skins screen protector to anyone looking for a great way to protect the screen on their new tab or any other electronic device that needs a screen protector. I will definitely be ordering from them again once I get my new phone.
Feel free to ask me any questions and I will do my best to answer them.
Samsung Galaxy Tab 10.1 Screen Protector - $24.95 : Screen Protector | Screen Protectors | Shield | XO Skins
how is it holding up now a month later? I am still torn on getting one
b00sted said:
how is it holding up now a month later? I am still torn on getting one
Click to expand...
Click to collapse
Still goin good, no complaints from me at all.
I also think they have a 30 day money back guarantee if your not happy, but dont quote me on that because I am not 100% sure
Hi everyone. I searched the forums for screen protectors, and what I found was a whole lot of threads on various screen protectors out there, but nothing centralizing these discussions. So I thought I'd create this thread.
1. What type of screen protector do you use?
2. How has it held up?
3. Have you gone without a screen protector?
4. If so, do you have any scratches?
5. What's the most you have paid for one?
6. What's the cheapest you have paid for one?
7. Any Rants? Any Raves?
8. Any you would recommend?
9. Any you would want to try?
10. Any tips to putting certain ones on?
Let's help each other out by sharing our knowledge on screen protectors for the HTC One.
Top screen protectors according to you guys.
1. Mime Feather Glass Screen Protector - $27.95 http://mimeusa.com/product/htc-one-feather-glass-tempered-glass-screen-protector/
2. Zagg Clear HD Screen - $19.99 http://www.zagg.com/invisibleshield/htc-one-cases-screen-protectors-covers-skins-shields
3. Verizon 3 Pack Anti-scratch Protectors - $12.99 http://www.verizonwireless.com/acce...-protectors-3-pack-w-screen-wipe-for-htc-one/
Installation videos
1. Android Authority demonstrating how to install wet and dry screen protectors such as the Zagg and ScreenWear http://youtu.be/sf0a-c7WH8U
2. Danny Winget demonstrating how to install a glass screen protector such as the Spigen Glass http://youtu.be/F4_wtcmWVv4
Reviews via Amazon
1. Zagg HD http://www.amazon.com/ZAGG-HDHTCM7S...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
2. Zagg Original http://www.amazon.com/ZAGG-HTCM7S-i...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
3. Mime Ghost Glass http://www.amazon.com/MIME-Tempered...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
4. AmFilm http://www.amazon.com/Protector-Inv...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
5. Tech Armor http://www.amazon.com/Tech-Armor-De...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
6. Skinomi http://www.amazon.com/Skinomi-TechS...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
Drop Test
1. Zagg Shield drop test http://youtu.be/NxcUMZ4bTCM
2. Tempered Glass drop test http://youtu.be/33T1Qun7jsQ
Zagg HTC One High Def Screen Protector - Amazon
I think Zagg makes the best screen protectors, I have used them on both the HTC Droid Incredible and the HTC One. The Zagg screen protectors are not the cheapest option for screen protectors especially if you go for the ultra clear model but I think the cost is worth it, especially since zagg offers warranty replacements, you only pay for shipping. With the warranty replacements, registering your product on the Zagg website is quick and easy, there are no serial numbers you need to have or anything, you only need to tell them what device you got it for and which model screen protector you got.
Another benefit of the zagg shields is the lifetime of the screen protector, in my experience the screen protectors lasted almost 2 years for my Droid Incredible before I replaced it, the screen protector started to come off around the edges of my phone. While the screen protectors do age, I would much prefer the aged screen protector opposed to any damage to my screen. In my entire life of my Droid Incredible, bought in April 2010 and still used as an e-reader by my girlfriend today, there is not one scratch on the screen thanks to the Zagg shield.
While I have not personally tried the Verizon 3 pack of screen protectors, I have had friends use them and they were disappointed with the quality of them, the biggest issue was having the screen protector stay on.
Zagg screen protectors have done such a great job in my opinion I have not wanted or even thought of trying another brand.
As for tips to putting the Zagg brand on, make sure you wash your hands before you do anything, clean the screen so their is no oil, fingerprints, dust or anything else on the phone, make sure the spray gets on both the screen protector and the screen but do not soak either, just enough spray to cover the phone and protector. I found it best when applying the screen protector to start at the top of the screen in one of the corners and work your way to the opposite top corner then work your way down, make sure to use the applying tool they put in the packaging, be sure to use a good amount of force when use the tool but be careful not to apply too much pressure and crack the screen.
If you do not want to try putting the screen protector on yourself, you can go to the Cell Phone employees at Best Buy and have them put the screen protector on. You do not need to purchase the protector from Best Buy, but they charge you a fee to do it. The major benefit of this is that if they screw up and ruin your protector they will replace it.
I tried the Verizon 3-pack when initially purchasing the one. While they are decent, I knew I wanted something a little more rugged.
I did some research and ended up settling on the Mime USA Feather lite tempered glass screen protector. It's super thin and flexes nicely when unboxed, so it's highly unlikely to actually shatter like other tempered glass protectors. It's extremely scratch resistent. I tested car keys, nails, and knives on the screen protector after applying it to the phone and absolutely no marks showed up. It fits perfectly to the parameters of the screen and is hardly noticable after application. I would highly recommend this product. I ordered it from the Mime USA website for about $28, they even threw in a code for free shipping!
Sent from my HTC6500LVW using xda app-developers app
I usually don't use screen protectors and whenever I put on a case, I take it off an hour later. I've had the phone for like 9 months now and the screen is fine. There are tiny little scratches but you can't notice them unless you try really hard to, they don't affect the clarity of the screen in any way. I just don't like using screen protectors because they attract finger prints and smudges so easily even when I try a more expensinve screen protector. Honestly the screen will be fine for a long time. Yes there will be extremely tiny scratches but you won't care because they're almost non-existant. But one thing to keep in mind though, is that sand is crazy harsh on the screens, so I'm extra careful when I go to the beach with my phone. That's when I suggest putting on a case and a screen protector. Because even if a tiny bit of sand getes in your pocket, it might cause a little damage. Right now my phone is brand new since I got it replaced because of a camera issue, and I just can't get myself to stick with putting on a case or screen protector, I had a screen protector on it but I took it off 2 weeks later because I miss the naked screen.
Spitfire91726 said:
I did some research and ended up settling on the Mime USA Feather lite tempered glass screen protector. It's super thin and flexes nicely when unboxed, so it's highly unlikely to actually shatter like other tempered glass protectors. It's extremely scratch resistent.
Click to expand...
Click to collapse
Reviews go with what you said. I think when I buy my next screen protector when my zagg wears down, I'm going to try one of these.
i'm using an invisible shield screen protector. Went on pretty easy, there were no bubbles, and it's pretty thick. I've only had it on for a week, so I can't say much about durability, but it's pretty good as far as a screen protector goes. I'm still very partial to those matte finish screen protectors, so i'll probably be picking up one of those in the future.
BygSii said:
Reviews go with what you said. I think when I buy my next screen protector when my zagg wears down, I'm going to try one of these.
Click to expand...
Click to collapse
Got a MIME Feather myself about a month ago or so now, and I must say that it's the best choice I've ever made as far as screen protection. I'd had a Spigen and some other tempered glass brand, but they were both just too thick and noticeable on the screen. The Feather is perfect because it's hard to even tell it's on there, plus it has the Oleophobic coating to prevent smudges and fingerprints. Seriously, don't even waste your money on another screen protector. You can't beat the MIME Feather.
tyler.durden said:
Got a MIME Feather myself about a month ago or so now, and I must say that it's the best choice I've ever made as far as screen protection. I'd had a Spigen and some other tempered glass brand, but they were both just too thick and noticeable on the screen. The Feather is perfect because it's hard to even tell it's on there, plus it has the Oleophobic coating to prevent smudges and fingerprints. Seriously, don't even waste your money on another screen protector. You can't beat the MIME Feather.
Click to expand...
Click to collapse
+1 what he said, minus the experience with Spigen. The MIME Feather is the first glass screen protector I've tried, and I don't think I'll ever use anything else. It's superb and well worth the premium price. With that on the screen and a Ballistic Shell Gel case on the rest of the phone, I don't worry about it too much.
I got a EBay $6.99, Chinese made, 0.4mm thick tempered glass screen protector a few weeks ago.
Went on really well, no bubbles and sticking down along all edges and corners. Has the beveled edges on the glass so no sharp edges.
Far better than ANY plastic one i have used on any phone. Touchscreen works well with it on.
Actually hard to notice now its on unless you run your finger from the speaker onto the screen , so the REALLY thin ones must be pretty close to invisible.
I polish up the screen every 2-3 days. Does get prints on it, so maybe the expensive ones have a better oleophobic coating??
For the price, most excellent.
astmacca said:
I got a EBay $6.99, Chinese made, 0.4mm thick tempered glass screen protector a few weeks ago.
Went on really well, no bubbles and sticking down along all edges and corners. Has the beveled edges on the glass so no sharp edges.
Far better than ANY plastic one i have used on any phone. Touchscreen works well with it on.
Actually hard to notice now its on unless you run your finger from the speaker onto the screen , so the REALLY thin ones must be pretty close to invisible.
I polish up the screen every 2-3 days. Does get prints on it, so maybe the expensive ones have a better oleophobic coating??
For the price, most excellent.
Click to expand...
Click to collapse
so it's basically putting another layer of glass on top of your screen? Like putting a slide cover on a microscope slide? I wonder if that'll make screen touching a little imprecise (or any more than having a screen protector.
xzyragon said:
so it's basically putting another layer of glass on top of your screen? Like putting a slide cover on a microscope slide? I wonder if that'll make screen touching a little imprecise (or any more than having a screen protector.
Click to expand...
Click to collapse
Its definitely putting another layer of glass on the screen. You have to be careful and get it in the right position 1st time as they dont move around once stuck down. Removing them without breaking is, i suspect, very difficult. The "tape hinge" method of application works pretty well.
I have found the touch sensitivity on mine to be great. Certainly there is no difference to the "usability" of the phone, and the smoothness an feel is as good as the original screen.
I did read one review where the buttons on screen wouldn't work with a glass screen protector, but that has certainly NOT been my experience. From what i have read the thickness of these has come down from around 0.6mm in early incarnations to something like 0.15mm and being flexible in some brands.
I got a 0.4mm one. No scratches as yet. Its supposed to be very hard (9H??). I had no issues with fitting my case on after installing the screen protector.. Its a cheap silicone and hardback model that provides good corner protection. Hopefully the screen protector will help if it falls on its face sometime.
What about Just Like Glass?
Has anyone tried it?
Didnt know protectors like the Mime feather existed. Will have to try it out.
Xeternall said:
Didnt know protectors like the Mime feather existed. Will have to try it out.
Click to expand...
Click to collapse
Just bought my first one a month ago (MIME Ghost), best screen protector I have ever used. It's definitely scratch resistant and feels like the original screen. Not sure how it will hold up to drops, but that's not something I am willing to test.
Had a friend buy some Write Guard screen protectors for his HTC One. I installed one on his HTC One. Screen protector was all ready getting all kinds of scratches in it. No Bueno.
I used the XtremeGuard screen protector for a very long time on my HTC One, but recently I decided I wanted a matte finish screen protector, so I switched to Tech Armor Anti-Glare. Feels much nicer to me and gets a lot less fingerprints and smudges.
I was using the protector that came with the UG case. After reading this thread, I picked up a MIME. Very impressed. It goes on dry, was easy to remove and reposition and left absolutly no bubles (these drive me CRAZY). It has somewhat finger print resistant and I did not heave to deal with wetting the protector, then waiting 24 hours to see if all the bubles went away. Best screen protector I have purchased and believe me, I have tried at least 20 different types over the years.
I have had no issues with the touch sensitivity. You can't even notice it's on unless you look really closely at the top edge.
Using the screen protector that came with my otterbox comuter and it is quite terrible.
The screen protector has been on since April and it is already deteriorating. The spots where I'd swype, type show heavy signs of use. With a faint finger swipe over the screen you can actually feel the difference.
Other than that, the actual performance isn't the worst. Glare and all in the sun is bad, indoors though I don't have any issues.
Will look into MIME.
Cheers,
I just thought I should share a valuable lesson: DON'T BUY CHEAP SCREEN PROTECTORS!
I have been fine in the past with cheap screen protectors from eBay. They got the job done, and they were only a dollar or two. And you got six of them.
Anticipating the arrival of my N5, I bought a Spigen Neo-Hybrid case (Which is excellent), and some cheap screen protectors for $2. (12 to be exact)
http://www.ebay.com/itm/231089059032?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
I bought a bunch because that gives ample headroom if you mess up a few times.
I try to install the first one, and it ends up with bubbles near the cutouts for the speaker and camera. Okay, I'll just try another one.
I've gone through six of them, and they all have the same bubble problem near the cutouts.
I ended up buying higher-end screen protectors: http://www.amazon.com/gp/product/B00EV97UD6/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
I'll be sure to report on those when they arrive.
But the lesson is to be cautious with cheap screen protectors.
The xtremeguard screen protectors are really good, and they can be found for under $2.
mprasolov said:
I just thought I should share a valuable lesson: DON'T BUY CHEAP SCREEN PROTECTORS!
I have been fine in the past with cheap screen protectors from eBay. They got the job done, and they were only a dollar or two. And you got six of them.
Anticipating the arrival of my N5, I bought a Spigen Neo-Hybrid case (Which is excellent), and some cheap screen protectors for $2. (12 to be exact)
http://www.ebay.com/itm/231089059032?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
I bought a bunch because that gives ample headroom if you mess up a few times.
I try to install the first one, and it ends up with bubbles near the cutouts for the speaker and camera. Okay, I'll just try another one.
I've gone through six of them, and they all have the same bubble problem near the cutouts.
I ended up buying higher-end screen protectors: http://www.amazon.com/gp/product/B00EV97UD6/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
I'll be sure to report on those when they arrive.
But the lesson is to be cautious with cheap screen protectors.
Click to expand...
Click to collapse
I've got some of the iSmooth protectors and they are quite good...once I properly installed them. Dry apply are a little tricky but there are enough tutorials and videos to help. I also have the Neo Hybrid and I'm quite happy with it.
BigOkie said:
I've got some of the iSmooth protectors and they are quite good...once I properly installed them. Dry apply are a little tricky but there are enough tutorials and videos to help. I also have the Neo Hybrid and I'm quite happy with it.
Click to expand...
Click to collapse
I guess I lucked out with my choice of screen protector!
Not necessarily. I bought these SAMAR crystal clear screen protectors, managed to apply one without getting any dust or air bubbles. It has all the cutouts, the fit is good, and it is quite smooth when swiping, very happy with it so far. To top it all off it is dirt cheap and you get 6 protectors all with cleaning cloths! I've read others on here who have been happy with this brand too. Would definitely recommend.
use a drop of water when u install. it'll help take out bubbles.
also you can reapply these, just rinse in soap water then water, then shake off excess and apply. squeegee out the water - should be next to nothing.
ktamondo said:
The xtremeguard screen protectors are really good, and they can be found for under $2.
Click to expand...
Click to collapse
True. And even with that. I got one first and tested before I got backups.
I use an IQshield screen protector and it's nothing short of pure awesome. No bubbles at all, and it's so smooth and dried hard. It feels like glass.
You get what you pay for. I bought the spiegen Crystal for 10 bucks and they went on perfect and looked perfect and felt pretty good to you cant even tell its on unless you look at the earpiece closely. But there's always better! I just recently bought a Nillkin Glass screen protector with 9h hardness and olephobic with rounded edges and its gonna be getting here in a week or so and that should be way better than a cheap or high quality screen protector!
This sounds silly, but whenever I install a cheap screen protector, I do two things: first, i make sure the side that's going to be applied to the screen is FACE DOWN. Never face it up, under any circumstances. if I do, its before removing from packaging. I even remove the adhesive that protects the protector itself, with the screen protector face down. this doesn't give a chance for dust to sit on the bottom of the screen when facing up. Yes im sure any dust flying around will still find a way to stick, but this reduces the chances. Plus, you make sure you are applying in a clean environment anyway. I usually vaccum the house (or area at least) prior to applying, and give the dust time to settle afterwards.
second, and heres the silly part: I make sure the screen is completely wiped, and blow on the screen itself with DRY LIPS as im applying the screen protector face down. This blows off any dust that may settle between the time you apply the screen, and make sure lips are dry as to not blow moisture onto the screen.
There really isn't any fool proof method for applying screen protectors without dust, but without some sort of clean box with a built in HEPA filtration system, this seems to work well for me 80-90% of the time, versus just applying like normal.
unvaluablespace said:
This sounds silly, but whenever I install a cheap screen protector, I do two things: first, i make sure the side that's going to be applied to the screen is FACE DOWN. Never face it up, under any circumstances. if I do, its before removing from packaging. I even remove the adhesive that protects the protector itself, with the screen protector face down. this doesn't give a chance for dust to sit on the bottom of the screen when facing up. Yes im sure any dust flying around will still find a way to stick, but this reduces the chances. Plus, you make sure you are applying in a clean environment anyway. I usually vaccum the house (or area at least) prior to applying, and give the dust time to settle afterwards.
.
Click to expand...
Click to collapse
You can skip all the surgical-precision vacuuming if you do the application in the bathroom. Turn on the shower, hot as it'll go. Leave it run for 5-10 minutes til the bathroom is steamy. That knocks all the dust out of the air.
Then you can apply your screen protector in peace.
Caelrie said:
You can skip all the surgical-precision vacuuming if you do the application in the bathroom. Turn on the shower, hot as it'll go. Leave it run for 5-10 minutes til the bathroom is steamy. That knocks all the dust out of the air.
Then you can apply your screen protector in peace.
Click to expand...
Click to collapse
but wouldn't that cause moisture in the air? I could see that getting in between the screen during application. I bought a ton of screen protectors like OP though, so I'll have to give this idea a shot lol
The moisture will get out over time. Its just like having windows tinted
Sent from my Nexus 5 using Tapatalk
unvaluablespace said:
but wouldn't that cause moisture in the air? I could see that getting in between the screen during application. I bought a ton of screen protectors like OP though, so I'll have to give this idea a shot lol
Click to expand...
Click to collapse
It doesn't matter. Even dry-applied screen protectors go on better this way, and any moisture completely dries out quickly anyway.
Spend a few hundred dollars on a phone and then buy the cheapest cases and screen protectors you can? Doesn't make sense.
I'll pay the extra $8 for a Spigen screen protector and a quality case that match the quality of my Nexus.
Sent from my Nexus 5 using Tapatalk
Spigen could've tried a bit harder and made all the cutouts. Even the temporary screen protector that comes with the phone has those. I think most screen protectors will be similar at the $1+ range but you can't expect much from ones that cost $0.25.
xtremeguards didn't have bubbles for me. Buying 6 of the same screen protectors and then saying all of them have problems doesn't make sense.
I'm assuming the OP means the bubbles are from the edge of the cutouts not sticking down which is a common issue with cheap screen protectors.
the cutouts are not made well so the screen protector itself is warped at the cutouts for the speakers etc so its not flat and does not stick down creating bubbles there.
Just install in steamy bathroom. The steam prevents dust from floating in the air.
Sent from my Nexus 7 using XDA Premium HD app
I got this Nillkin one: http://dx.com/p/277084. I only had one. Applied by using the "hinge" method. Went perfectly. Cutouts are perfect and bubbles are removed very easy (easier than other screen protectors I've had).
I used a little wet cloth to make my screen wet and to remove dust. At first it feels very rubbery, but after using it for a day or even less, it feels just like the glass!
Hi, I want to share my experience with skinomi techskin screen protectors.
Skinomi screen protectors are wet application screen protectors.
They are supposed to hold advantages such as:
Better Light Penetration
UV protection
Tough Skin for anti scratch
Anti yellowing
Self healing
No Orange Peel
Application
They are not simple to apply at all. Easy to align but hard to have no dust underneath. You have to spray the screen protector with the application liquid. And then put over the phone screen. But in doing so, you cannot see the small specks of dust that is trapped under the screen protector until you have completely applied it. This is because the screen protector has many microbubbles underneath it and seeing dust and removing them is very difficult. If you use your fingers to reapply then what tends to happen is that more dust goes in. This is because the dust sticks to wet surfaces easier than dry surfaces.
Furthermore, you are not really supposed to touch your device for half a day until after application to allow for micro bubbles to disappear. So you can't really tell you messed up until later. When reapplication can result in stretched skin.
Micro-Bubbles
They do disappear after 48hrs. They are generally not a problem. Sometimes if you reapply too many times, the micro bubbles do not disappear. They didn't disappear after the 3rd reapplication when i simply gave up.
Post Application/ Results
My sample had vertical rainbow streaks on it. This is what looks like single pixel lines that run vertically for about 5mm to 10mm. They are scattered across the screen and is very annoying when you are viewing a white background. I was told they were supposed to go away but they never did. Not even after 4days. They agreed to give me a second copy after i emailed them pictures of the faulty product. They sent me a new one free of charge with shipping paid for. But this also had the same problem even though I applied it more perfectly.
Again Also they both had a bad orange peel problem that make the screen protector have a uneven pattern on it. This problem does not fix itself and will not go away after 3 days. This could be the cause of the skin also feeling very grippy, which is not a feeling that i enjoy.
Customer Service
Very good. They responded to the emails within 2 days. They agreed to work out my problem and send me a replacement.
Overall/ Was it worth it
Oh Hell No! Both had defects. They cost 7pounds on amazon uk. Although you get replacements for life you do have to send them your previous product meanings shipping fees. I didn't but that wasn't the conventional protocol as stated on their website. I got some 1pound for 6 cheapo screen protectors that did the job much better (more clear, no orange peel, no dust, easy to apply, more slip) than the expensive skinomi.
I would not recommend this product.
I would recommend you get yourself some cheap $2 for 6 screen protectors to hold you out until you get yourself some china tempered glass screen protectors. Those are nice.
I highly recommend this screen protector. I'm sorry for your bad experiences =(
Sent from my Nexus 5 using Tapatalk
Agree with geminiworld8
I just checked Gearmaxx Ultra screen protector. Really it's a good one.