ok first here is my problem
I have a Kindle fire that is stuck at the boot logo for cm10 from what ive found out due to not clearing the cache prior to rebooting
also with KFU running and the KF hooked up it reads adb status online and boot status unknown. when hooked up through the regular usb cable it goes through to the cm10 boot logo and is recognized by the computer and kfu
when hooked up trhough the factory cable its neither recognized by my computer or KFU and only stays at the kidlefire orange and white logo.
NOW how i got here
little sister got the KF and of course wanted more out of it. rooted and installed twrp and proceeded to flash roms through twrp SHE DIDNT INSTALL FFF. she said she got it stuck first on the AOSP? boot logo also what we later found out from not clearing the cache. then was able to get in through KFU to reboot back up to recovery and flash back to factory setting but still with twrp installed. well then went on to flash cm10 again without clearing the cache AFTER flashing the final gapps before rebooting and got it stuck yet again at the boot logo.
so with her being out of town i wanted to fix it for her so i got a factory cable and what not but wanted to try first through kfu so i hook it up and its recognized and what not well when i go to push 1 for bootmodes i accidently hit 4 i think and starting installing twrp AGAIN while it was STUCK at the cm10 boot logo. and that was the last thing that got me stuck to where the boot status isnt noticed
WHAT IVE TRIED. everything
kfu doesnt find the file for bootmodes now so i tried command prompts and thats saying device offline
so i got a factory cable and that makes it to where the computer AND kfu dont recognize it at all???
i also get with the regualr usb cable MTP USB device FAILED with the litt;le yellow caution triangle under Portable Devices but
shows it under Android Phone as Android Composite ADB interface???
but as stated with the factory cable it IMMEDIATELY says USB DEVICE NOT RECOGNIZED
with regular power it boots and gets stuck at the cm10 logo screen
with factory cable it only goes and stops at the orange and white kindle fire logo
i hope ive provided everything i can and hope someone can help out. thanks guys and its been some great reading on this site
Remi85 said:
with factory cable it only goes and stops at the orange and white kindle fire logo
Click to expand...
Click to collapse
This means your bootloader is not the FireFireFire.
Remi85 said:
i also get with the regualr usb cable MTP USB device FAILED with the litt;le yellow caution triangle under Portable Devices but
shows it under Android Phone as Android Composite ADB interface
Click to expand...
Click to collapse
Reinstall Kindle Fire Drivers from the Kindle Fire Utility package. Unzip your download and run the install drivers batch file. Then try to plug the Kindle in again.
Remi85 said:
but as stated with the factory cable it IMMEDIATELY says USB DEVICE NOT RECOGNIZED
with regular power it boots and gets stuck at the cm10 logo screen
Click to expand...
Click to collapse
Best way to get things working here is to run Kindle fire utility, run the "intall FireFireFire" option, it will say waiting on device, with your kindle off, attach the Factory cable to the kindle and then plug it into the PC. Hopefully this will get the bootloader installed, and while you're at it, go ahead and reinstall TWRP, as it shouldn't cause an issue. After you get the bootloader and TWRP installed, you can wipe caches and see if that helps.
mthous01 said:
This means your bootloader is not the FireFireFire.
Reinstall Kindle Fire Drivers from the Kindle Fire Utility package. Unzip your download and run the install drivers batch file. Then try to plug the Kindle in again.
Best way to get things working here is to run Kindle fire utility, run the "intall FireFireFire" option, it will say waiting on device, with your kindle off, attach the Factory cable to the kindle and then plug it into the PC. Hopefully this will get the bootloader installed, and while you're at it, go ahead and reinstall TWRP, as it shouldn't cause an issue. After you get the bootloader and TWRP installed, you can wipe caches and see if that helps.
Click to expand...
Click to collapse
hey thanks mthous
Ya i told her if she would have installed the FFF that alot of this would be a whole bunch easier.
As for installing the drivers ive done that and it IS being noticed by the computer as i stated with the reg. usb cable, In KFU its read as ADB Status ONLINE but bootmode status UNKNOWN. so its being recognized just i think since the Kindle is stuck in whatever bootmode that its not being read.
ONLY WHEN i plug it in with the Factory cable is it completely invisible to the computer and unrecognized IMMEDIATLEY after attached to the KF.
But im going to try that last piece of advice but i had tried something similar with going to the KFU and choosing option 1 then choosing i believe option 2 for recovery mode then hit enter and it said "waiting for device" BUT as usual it didnt even read that the device was connected with the Factory Cable. IS there a special different kind of driver for the FACTORY cable that i dont know about? MAYBE its not made right???? i bought it from a reputable ebay dealer. and it DOES alter the state of the KF by keeping it at the KF logo instead of going on through to the CM10 boopt logo.
i dont know.
ANYONE reading this with some idea please chime in cause its gotten to the point where i just turn the KF on to see it light up and watch the cm10 boot animation thinking of the day that i will one day be able to use it :crying::crying:
so im just going to try this http://forum.xda-developers.com/showthread.php?t=1430038
seems my problem is the drivers and what not so hey why not right. SUCKS i had to search so many places to even know FULLY what pokey (the op) was talking about.
such as making a bootable usb. finding the diagram on how to short out the kindle and things of that but i fully feel confident that this will fix it. also ive included my links incase anyone else is having this problem and isnt as good at searching.
http://forum.xda-developers.com/showpost.php?p=19762674&postcount=51
http://www.youtube.com/watch?annota...&feature=iv&src_vid=RQLI-p-tRRQ&v=nt7ovI_CLXk
link from the vid
http://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3-/
ill let you know what happens CROSS YOUR FINGERS this is the last step before i pay someone to fix it.... ANYONE in TX!!!!
What was your outcome? I'm having the same exact issue, and I'm pulling my hair out!
i have one other option you might wanna try.
using fastboot cable, get to the kindle logo and plug it in to your computer.
delete your .android folder located at c:\users\%your user%\.android
open kfu and it should say offline
run the option to install FFF that might do it.
let me know what happens
goldflame09 said:
i have one other option you might wanna try.
using fastboot cable, get to the kindle logo and plug it in to your computer.
delete your .android folder located at c:\users\%your user%\.android
open kfu and it should say offline
run the option to install FFF that might do it.
let me know what happens
Click to expand...
Click to collapse
Didn't work. Kindle installs as a USB MTP Device.
bondosho said:
Didn't work. Kindle installs as a USB MTP Device.
Click to expand...
Click to collapse
now you cant get into recovery right?
I can't get anywhere, or flash anything. It just boots up, and goes to the off center CM logo.
Sent from my SPH-L710 using xda app-developers app
Might be a stupid question to ask - but it seems like you already have firefirefire due to previous flashing and etc, have you tried pushing the power button repeatedly during the boot to change the bootmode?
This can be an easy way to get into recovery and do a complete wipe then reflash. I had an issue similar to this and it was because I forgot to do my wipes because I was focused on getting my device recognized by KFU.
sorry been lazy and i gotta search where all the links were now... but def going to do this today sometime.....oh ya links are in my post lol ok well i WILL get back to see if this "drastic way" works is it wierd that it doesnt seem that complicated to do it this way??? i feel like im missing something like it should be alot harder. idk ill find out and get back.
zane203 said:
Might be a stupid question to ask - but it seems like you already have firefirefire due to previous flashing and etc, have you tried pushing the power button repeatedly during the boot to change the bootmode?
This can be an easy way to get into recovery and do a complete wipe then reflash. I had an issue similar to this and it was because I forgot to do my wipes because I was focused on getting my device recognized by KFU.
Click to expand...
Click to collapse
I'll try that.
Sent from my SPH-L710 using xda app-developers app
And that didn't work
Here's a quick video:
https://www.youtube.com/watch?v=u5pv-vsUihA
Related
first of all thanks for the excellent rom.since im just trying out this new rom,im intending to change my rom back to modaco gr8 after trying out for some time.
But here's the trouble here.i always can't seem to access twrp through my kf.Each time what i did was i connect my device with USB to the pc and use kfu to reflash twrp to gain access.
But now with this gederom,my pc can't seems to detect my kf and it keeps saying driver is needed.
So what can i do now to once again gain access to twrp??
please please help me im really panic now.
chaukeng said:
first of all thanks for the excellent rom.since im just trying out this new rom,im intending to change my rom back to modaco gr8 after trying out for some time.
But here's the trouble here.i always can't seem to access twrp through my kf.Each time what i did was i connect my device with USB to the pc and use kfu to reflash twrp to gain access.
But now with this gederom,my pc can't seems to detect my kf and it keeps saying driver is needed.
So what can i do now to once again gain access to twrp??
please please help me im really panic now.
Click to expand...
Click to collapse
I had to read this post a couple of times just to make sure I'm not going crazy. So you have been using the KFU to REFLASH recovery every time you want access to it?!
I'm not going to be nice and not say what I really want to say. But do yourself (and everyone here) a huge favor and thouroghly read this thread...
http://forum.xda-developers.com/showthread.php?p=23747567
...before you do anything else on your Kindle and potentially do damage to your device. HINT: the problem isn't the rom
[Edit:] When you're done reading the above posted thread, read this one for good measure:
http://forum.xda-developers.com/showthread.php?p=19837228
Sent from my Amazon Kindle Fire using xda premium
the link is broken.any way to read that?
i Doesn't know what im doing is wrong since no one replies to me in my local forum.
and also i flashed modaco gr8,uses it for around 1 month and its been working great.
But now i realise my mistakes now and any way to change this?
just want to reflash this to my modaco.thanks!
XDA Won't let me copy the full link for some reason.. Go to the General forum under stickies and select Kindle Fire for Beginners.
[Edit:] fixed try again
Sent from my Amazon Kindle Fire using xda premium
sorry first one still can't open.
I know once i reboot my kf i have to either long press or press twice to get my switch into orange colour to get into recovery mode.
But since mine is not the fire triangle anymore (its an android doll on top of the 'kindle fire' logo.i doesn't know why mine is this version but i've read alot with this also ). i couldn't access recovery through the aforementioned method anymore.i tried to ask many people even natmile on facebook and i've got no confirmation from them until now.
i did do some readings including the one for the beginners and i do search for my problem on why i can't access to my recovery.But i just can't find an answer.really need your help.
chaukeng said:
sorry first one still can't open.
I know once i reboot my kf i have to either long press or press twice to get my switch into orange colour to get into recovery mode.
But since mine is not the fire triangle anymore (its an android doll on top of the 'kindle fire' logo.i doesn't know why mine is this version but i've read alot with this also ). i couldn't access recovery through the aforementioned method anymore.i tried to ask many people even natmile on facebook and i've got no confirmation from them until now.
i did do some readings including the one for the beginners and i do search for my problem on why i can't access to my recovery.But i just can't find an answer.really need your help.
Click to expand...
Click to collapse
The "yellow triangle" logo is the FireFireFire bootloader (version 1.2). The "kindle fire" logo with android is also the FireFireFire bootloader (version 1.3). Recovery selection for both versions is the same, only the time span given for you to make the selection has been reduced in v1.3. My guess is that you are not pressing the power button at the right time to make the selection.
This is the thread for FFF v1.3...
http://forum.xda-developers.com/showthread.php?t=1541043
In the first post, it gives you directions on how to make the recovery selection...
Recovery Selection - As the Kindle Fire boots up, the power button LED will change from bright green to a dim green. Once it changes to a dim green, press the power button again and release (repeat a few times to be sure). The LED will then change to an orange color indicating recovery selection and boot into recovery.
Personally, I keep my fingernail on the button and as soon as the reflection goes dim, I press/release several times. If you want to be absolutely sure, keep pressing/releasing until the LED goes orange. This always works for me without fail. If the LED goes orange and it doesn't get to recovery, something is wrong with your recovery.
As far as gedeROM goes, look in the notification area and make sure it says "Android debugging enabled" when you have it hooked up to your computer. If you still can't send it adb commands, then it's likely a device driver issue. Read the second post of the first link soupmagnet gave you.
chaukeng said:
But since mine is not the fire triangle anymore (its an android doll on top of the 'kindle fire' logo.i doesn't know why mine is this version but i've read alot with this also ). i couldn't access recovery through the aforementioned method anymore.
Click to expand...
Click to collapse
That is a very important piece of information that would have been useful from the beginning. There is no reason for the new version of FireFireFire (Kindle fire logo w/android) to work any differently from the old one (yellow triangle) in regards to entering recovery.
Try reinstalling FireFireFire to see if that fixes the problem.
Sent from my Amazon Kindle Fire using xda premium
sorry...i was too nervous and missed this...thanks for both of your help.i will try the above method and see whether it works.
and i can't reinstall firefirefire since my pc won't detect my kindle fire.and it now detects it as p1000 (samsung galaxy tab).
chaukeng said:
sorry...i was too nervous and missed this...thanks for both of your help.i will try the above method and see whether it works.
and i can't reinstall firefirefire since my pc won't detect my kindle fire.and it now detects it as p1000 (samsung galaxy tab).
Click to expand...
Click to collapse
Try fastboot mode in KFU. Option 1, when it show <waiting for device> then connect the KF, hold down the power button untill it shut down, and hold button again to turn it on.
If you can somehow get to fastboot, try flash TWRP again.
Sine you can get in to FFF, I strongly believe that it's still alive.
Gửi từ Kindle Lửa của tôi qua Tapatalk 2
reinstall drivers
chaukeng said:
sorry...i was too nervous and missed this...thanks for both of your help.i will try the above method and see whether it works.
and i can't reinstall firefirefire since my pc won't detect my kindle fire.and it now detects it as p1000 (samsung galaxy tab).
Click to expand...
Click to collapse
I think you need to go in to device manager and uninstall the drivers and reinstall the drivers . Try it out
i tried using kfu and use fastboot.but can't detect.
since gedeROM design to change our kf into galaxy tab,can i manually change and allows the pc to detect my kf as a kindle fire?Then probably i would have access to kfu.
btw i tried pressing the button but still couldn't access twrp through device.
You're in a pretty tricky spot. Apparently, the way GedeROM was set up, it is causing problems with adb connecting. But it all boils down to a driver issue. You need to somehow get into twrp to flash a different rom and see if it is the rom causing your original problem. But without access to recovery or USB debugging, I can't think of anything that will help you.
Try uninstalling and reinstalling your device drivers until you can get a connection long enough to change your bootmode to 5001 in order to get back into recovery.
You need to be able to get a solid connection with adb and fastboot to further troubleshoot your problem and it looks like you can't do that with the rom you're using.
Sent from my Amazon Kindle Fire using xda premium
I have the same problem, loaded GedeROM got in fatboot, and now I am stuck.
okay.somehow i've managed to get USB mass storage working.But KFU still shows offline.
But then i found out if i ask the kfu to help me boot to recovery it may still works.But can i do this and get to recovery and flash back my modaco?
Or should i manually flash my twrp again?
Flash MoDaCo to see if that helps. If not, reflash twrp. If not still, reflash firefirefire.
very nervous...i flash twrp again and i get to boot into recovery.omg....now im restoring into my modaco backup...hope it works.
Btw my kfu status is now 'online'
thanks so much soupmagnet!
But what if my kf still can't access twrp,should i do everything from the start manually?
power butoon
chaukeng said:
first of all thanks for the excellent rom.since im just trying out this new rom,im intending to change my rom back to modaco gr8 after trying out for some time.
But here's the trouble here.i always can't seem to access twrp through my kf.Each time what i did was i connect my device with USB to the pc and use kfu to reflash twrp to gain access.
But now with this gederom,my pc can't seems to detect my kf and it keeps saying driver is needed.
So what can i do now to once again gain access to twrp??
please please help me im really panic now.
Click to expand...
Click to collapse
start by powering your of, no need to connect anything ( USB) just make sure the from is in your of SD card wait for the yellow triangle any press several times with 3 sec intervals, until twrp shows up...hope this helps you...
ADB Not Working After GedeROM
I've been using the 28-04-2012 GedeROM all weekend, and it works fine, but I still haven't been able to get ADB working. I checked Android Debugging under Developer Options. On my PC, the KF only shows up in my Device Manager as a Disk Drive with the designation "Am", not as an ADB device, and the ADB Devices command doesn't show any devices attached. My computer thinks its an empty disk drive (no data). I have a regular Windows x86 PC. I try and try but I can't re-install any other driver to get the PC to recognize it.
Funny thing-- I tried recovering my stock system and data from TWRP (after factory wiping GedeROM), and it didn't work, I just get a dim lit screen on reboot. GedeROM re-installed ok, so I'm not too upset, just wondering why I can't go back.
I searched around on the lists but didn't see any idea that worked. Any suggestions would be greatly appreciated.
Thanks- Roger
Roger Dives said:
I've been using the 28-04-2012 GedeROM all weekend, and it works fine, but I still haven't been able to get ADB working. I checked Android Debugging under Developer Options. On my PC, the KF only shows up in my Device Manager as a Disk Drive with the designation "Am", not as an ADB device, and the ADB Devices command doesn't show any devices attached. My computer thinks its an empty disk drive (no data). I have a regular Windows x86 PC. I try and try but I can't re-install any other driver to get the PC to recognize it.
Funny thing-- I tried recovering my stock system and data from TWRP (after factory wiping GedeROM), and it didn't work, I just get a dim lit screen on reboot. GedeROM re-installed ok, so I'm not too upset, just wondering why I can't go back.
I searched around on the lists but didn't see any idea that worked. Any suggestions would be greatly appreciated.
Thanks- Roger
Click to expand...
Click to collapse
You need to reinstall the drivers. Long explanation at this link...
http://forum.xda-developers.com/showthread.php?t=1625356
ADB on GedeROM
Thanks for the advice Kinfauns, I'll read your article and try to reinstall the drivers again tonight. I did try over the weekend, checked the drivers, made sure they didn't change somehow, but the system wouldn't accept the drivers-- either "not better than what is already installed", or "can't find any drivers". My PC seems to recognize the KF as a disk drive, not as an ADB or Android device, so it's like the PC isn't even looking for my driver to be a suitable driver for the "Am" disk drive.
Thanks for your help!
Roger
Yesterday I wanted to connect my rooted Kindle Fire to my computer to sync books onto. I would connect it with a micro USB and the notification would come up to connect the kindle to my computer and I did as i always have. Only this time the kindle said it was connected but my computer shows no external devices in Computer except in the bottom right an option to Safely Remove USB Device is still their while my computer does not recognize it. After restarting the Kindle and my computer multiple times i tried using several different micro USB cords. After giving up I decided to factory reset it in the Kindle setting. It reset and started to reboot and it froze on the Orange and white Kindle Fire logo after the blue and white bootmenu. My Kindle Version is 6.3.1 and TWRP is 2.1.1. Every time i try to open normal boot mode and reset boot mode it would freeze and the only thing that is working is Recovery mode. I figured that something went wrong so i tried to wipe the system from TWRP and reboot it but the same thing happens. After searching for an answer i came here http://forum.xda-developers.com/showthread.php?t=1977311 I read it and tried to mount my Kindle as a usb device but it still will not show up on my computer. So now i am left with a bricked Kindle Fire and can't connect it to my computer to try and fix it. If anyone can help PLEASE!!!! respond as soon as possible!
Reinstall drivers from kfu.
Then try mounting USB through twrp again.
It also appears that the computer recognizes the kindle but you can't see it in computer? Go to the device manager on your computer, and see what your kindle is recognized as.
Even if you can't get your computer to fully recognize it as a mass storage device, try to push through the steps in kfu. If kfu says " waiting for device" restart the kindle.
Sent from my Amazon Kindle Fire using Tapatalk HD
I know its too late now but never ever do a factory reset from settings if you are rooted .sounds to me like u have a soft brick and should be able to get it back especially if you can still get into twrp you also need to make sure its a first gen kindle and not a second gen. The second gen kindles have locked bootloaders and have to be rooted differently than a first gen
Sent from my Kindle Fire using xda app-developers app
eplc99 said:
Yesterday I wanted to connect my rooted Kindle Fire to my computer to sync books onto. I would connect it with a micro USB and the notification would come up to connect the kindle to my computer and I did as i always have. Only this time the kindle said it was connected but my computer shows no external devices in Computer except in the bottom right an option to Safely Remove USB Device is still their while my computer does not recognize it. After restarting the Kindle and my computer multiple times i tried using several different micro USB cords. After giving up I decided to factory reset it in the Kindle setting. It reset and started to reboot and it froze on the Orange and white Kindle Fire logo after the blue and white bootmenu. My Kindle Version is 6.3.1 and TWRP is 2.1.1. Every time i try to open normal boot mode and reset boot mode it would freeze and the only thing that is working is Recovery mode. I figured that something went wrong so i tried to wipe the system from TWRP and reboot it but the same thing happens. After searching for an answer i came here http://forum.xda-developers.com/showthread.php?t=1977311 I read it and tried to mount my Kindle as a usb device but it still will not show up on my computer. So now i am left with a bricked Kindle Fire and can't connect it to my computer to try and fix it. If anyone can help PLEASE!!!! respond as soon as possible!
Click to expand...
Click to collapse
Luckily you have FFF installed (blue & white KF logo). The orange & white logo is the stock boot animation. Typically this would be a big problem, but you have FFF and access to recovery so all is well.
You need to download a ROM and get it to your sdcard so you can flash it in recovery. If you want to keep using stock, I'd suggest using MoDaCo rather than attempting to revert to stock as that would only compound your problems.
You have a couple options but considering you can't get your sdcard mounted to USB, you may be looking at bigger problems. Try to "adb push" the ROM to your sdcard. If for some reason when you navigate to the sdcard in recovery, you only see a single TWRP folder and nothing else, you'll have to reformat...maybe even repartition (easier than it seems).
"That's a special kind of stupid. The kind that makes me laugh."
soupmagnet said:
Luckily you have FFF installed (blue & white KF logo). The orange & white logo is the stock boot animation. Typically this would be a big problem, but you have FFF and access to recovery so all is well.
You need to download a ROM and get it to your sdcard so you can flash it in recovery. If you want to keep using stock, I'd suggest using MoDaCo rather than attempting to revert to stock as that would only compound your problems.
You have a couple options but considering you can't get your sdcard mounted to USB, you may be looking at bigger problems. Try to "adb push" the ROM to your sdcard. If for some reason when you navigate to the sdcard in recovery, you only see a single TWRP folder and nothing else, you'll have to reformat...maybe even repartition (easier than it seems).
"That's a special kind of stupid. The kind that makes me laugh."
Click to expand...
Click to collapse
SoupMagnate, i attempted to adp push the rom onto the kindle, the daemons started running and then it said no device found. How would i reformat it or re partition it?
Ecstaz said:
I know its too late now but never ever do a factory reset from settings if you are rooted .sounds to me like u have a soft brick and should be able to get it back especially if you can still get into twrp you also need to make sure its a first gen kindle and not a second gen. The second gen kindles have locked bootloaders and have to be rooted differently than a first gen
Sent from my Kindle Fire using xda app-developers app
Click to expand...
Click to collapse
It is 1st gen
eplc99 said:
SoupMagnate, i attempted to adp push the rom onto the kindle, the daemons started running and then it said no device found. How would i reformat it or re partition it?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=33109015
"That's a special kind of stupid. The kind that makes me laugh"
Please help! I was trying to flash an ICS rom on my kindle fire 2. I rooted it a few days ago and flashed JB rom by following the instructions here..
"http://forum.xda-developers.com/showthread.php?t=2105077"
Everything was working fine untill i flashed Gede ICS rom. Now whenever i press the power button the device keeps repeating the logos
First the Kindle Fire one and then the Blue and White Kindle Fire logo.. The later one stays for only a second.
Before, i could press the power buttong by pushing it during that logo but that doesn't seem to work now...
If only i can enter recovery mod i have powerpoints45's ROM resting in a folder in the internal SD card..
EDIT: When i plug the device with the PC using a usb cable (the normal one) nothing happens.. it doesn't show up in the devices list and neither do i hear any kind of sound..
haiderxabbas said:
Please help! I was trying to flash an ICS rom on my kindle fire 2. I rooted it a few days ago and flashed JB rom by following the instructions here.. "http://forum.xda-developers.com/showthread.php?t=2105077" Everything was working fine untill i flashed Gede ICS rom. Now whenever i press the power button the device keeps repeating the logos first the Kindle Fire one and then the Blue and White Kindle Fire logo.. the later one stays for only a second. Before, i could press the power buttong by pushing it during that logo but that doesn't seem to work now... if only i can enter recovery mod i have powerpoints45's ROM resting in a folder in the internal SD card..
Click to expand...
Click to collapse
yeah you flashed a kindle fire (1) rom for a kindle fire 2, thats a guaranteed brick. do you have a fastboot cable?
chris_m128 said:
yeah you flashed a kindle fire (1) rom for a kindle fire 2, thats a guaranteed brick. do you have a fastboot cable?
Click to expand...
Click to collapse
You mean a factory cable! No but i'll get it tomorrow if that's what i need to fix it.. can it be fixed? or is it bricked for good? =(
yeah they can usually fix 95 percent of kindle fire bricks, im pretty sure you'll be able to fix your kindle with it. and yes factory/fastboot cable are on in the same.
Thanks i need those kind of words to keep my hope up.... what do i have to do after i get the cable? coz its not being recognized by windows..
No sound! No yellow mark! no nothing.. it's like i didn't attach it at all...
I don't pretend to be an expert on this, hopefully someone with a little more knowledge than me will chime in, but the factory cable when automatically start your kindle fire in fastboot mode, it will be able to be read by your pc, the only trouble you might run in is with drivers, but it's nothing that can't be fixed. Then i would go over to hashcode's rom and follow step by step his instructions (fastboot method) for installing bootloader and then cm10.1. But like i said, someone with more information than me will hopefully post on here
haiderxabbas said:
Thanks i need those kind of words to keep my hope up.... what do i have to do after i get the cable? coz its not being recognized by windows..
No sound! No yellow mark! no nothing.. it's like i didn't attach it at all...
Click to expand...
Click to collapse
alright I had that problem before sounds stupid but turn on the kindle before attaching the cable make sure the drivers are installed I have them if you need them and what system is running on your pc? and before all of that you need to find your self someone with backed up fastboot cables.
hillconnor13 said:
alright I had that problem before sounds stupid but turn on the kindle before attaching the cable make sure the drivers are installed I have them if you need them and what system is running on your pc? and before all of that you need to find your self someone with backed up fastboot cables.
Click to expand...
Click to collapse
I installed the drivers but i'm not sure whether they are the right ones coz they don't seem to work now.. i'm running windows 7 x64 and it used to detect the device before it got bricked but now it doesn't do anything..
I searched all over the market today but can't seem to find a factory cable is it okay if i try to do the home made Fastboot cable thing? or should i order one online instead..
Home made thread:
http://forum.xda-developers.com/showthread.php?t=1392693
Why don't you think the drivers are working and homemade fast boot cables are okay but if there not done right they just want work or cut out half way though my fast boot cable it great just make it your self or get a Scorpion cable
I don't hear the sound the window makes when you connect something to the PC.. other than that there is no device recognized in the device manager.. so i figured there might be something wrong with the drivers too now.. i'm trying to make one if i can't i'll be getting the scorpion one you mentioned.. thanks
buy them from here, he makes the best
http://forum.xda-developers.com/showthread.php?p=21115858
scroll down to where you find xda user SkOrPn and read the ordering information and how to contact him
Try fixing with Linux
haiderxabbas said:
I don't hear the sound the window makes when you connect something to the PC.. other than that there is no device recognized in the device manager.. so i figured there might be something wrong with the drivers too now.. i'm trying to make one if i can't i'll be getting the scorpion one you mentioned.. thanks
Click to expand...
Click to collapse
I had the same problem: I bricked it when I wiped the data (and the rom I was going to load). I tried Windows and Mac, to no avail. Then I used my Linux machine.
Get an Ubuntu Live CD, and check out this tutorial; it worked like a dream:
http://desire.giesecke.tk/tutorial-adb-on-xubuntu/?wpmp_switcher=desktop
I was able to adb sideload the Rom and Gapps very easily via the terminal and TWRP on the KF2 - with a regular / stock micro USB cable.
Be sure to use 1949 and 0x1949 as the Kindle vendor IDs in the tutorial.
yudanjah said:
I had the same problem: I bricked it when I wiped the data (and the rom I was going to load). I tried Windows and Mac, to no avail. Then I used my Linux machine.
Get an Ubuntu Live CD, and check out this tutorial; it worked like a dream:
http://desire.giesecke.tk/tutorial-adb-on-xubuntu/?wpmp_switcher=desktop
I was able to adb sideload the Rom and Gapps very easily via the terminal and TWRP on the KF2 - with a regular / stock micro USB cable.
Be sure to use 1949 and 0x1949 as the Kindle vendor IDs in the tutorial.
Click to expand...
Click to collapse
I 'v asked my cousine to bring the factory cable on his way back here from Cyprus. Thank you Yudanjah i'll try your method too and then tell you if it worked for me or not..
I know this has been covered thoroughly in this forum multiple times, and I have really tried to read as many threads as possible before asking.
I rooted my device months ago and finally got a Nexus 7 and want to give my KF to my kids but wanted it stock first. I must have done something in TWRP that removed my bootloader.
I have tried the unbrick tool, I ordered a factory cable from Skorpn (awesome work btw) and by using KFU, my PC can finally see my Kindle.
The problem I'm having is that none of the commands are working and it looks like the bootloader is either bad or completely gone.
It used to turn on and the logo stayed bright. After I used the factory cable it now turns on, blinks, and goes dim.
All the drivers loaded correctly and KFU see's it online.
When I try to reinstall TWRP through KFU it downloads, but is stuck at waiting for device.
***********************************************
* Activating Fastboot (4002) *
***********************************************
2433 KB/s (510876 bytes in 0.205s)
- exec '/system/bin/sh' failed: No such file or directory (2) -
- exec '/system/bin/sh' failed: No such file or directory (2) -
The kindle has been told to reboot in Fastboot Mode.
< waiting for device >
After reading further, I think I formatted too much and wiped the SD card partition. It doesn't seem like there is a bootloader at all.
Did I miss something in all the reading?
Thanks.
So after doing even further reading I found
http://forum.xda-developers.com/showthread.php?t=1638452
I connected the factory cable and the logo is now staying brightly lit, so I assume it's in FB Mode.
I downloaded TWRP based on the link and FFF, but now I don't know what to do with them.
I went to ADB's site and installed SDK, but I'm not sure how to get the cmd portion to sideload TWRP and then FFF.
I'm doing my best to following along in the instructions and went to the ADB site and installed SDK.
I saved it to my C drive but when I try to do the following, along with "adb devices,
c:\Android\android-sdk-windows>
I get:
'adb' is not recognized as an internal or external command,
operable program or batch file.
Update:
NVM, I had it in the wrong directory.
Once I got that figured out, I did an "adb devices" and no devices came back. Of course I have the factory cable connected and I'm not sure if that matters.
Update:
Ok, now I used a standard USB and it sees my device, but now the logo went back to going dim after reboot.
So it looks like my problem is fairly common, however forum searches don't seem to be helping.
It looks like I wiped too much in TWRP.
Now that I finally figured out ADB, I'm confused about the factory cable.
When it's connected ADB does not see my device but the logo is lit bright yellow. When I use a standard cable ADB sees the device but the turns on and goes dim but the logo is still there.
I've downloaded the ZIP files for TWP and FFF, but I can't seem to figure out how to side load them no matter what I do.
I'm about to give up on this.
I decided to go the Soupkit rout and installed ubuntu 11.10 and got my PC to boot to USB.
I followed all the directions but my device is always offline. The only thing I can think of is that the 3rd step says to reboot, when I reboot Soupkit is gone and I have to download it again. When I download it, I save it, drag it to the desktop and extract it there and then run in terminal, use option 1 and then option 2.
I realize forums contain a ton of duplicate posts but I really tried to research and follow all the guides before posting.
Does anyone have any advice?
Update:
Realized I forgot to add persistence to the LiveUSB drive. I'm going to try again.
Copcheck said:
I'm about to give up on this.
I decided to go the Soupkit rout and installed ubuntu 11.10 and got my PC to boot to USB.
I followed all the directions but my device is always offline. The only thing I can think of is that the 3rd step says to reboot, when I reboot Soupkit is gone and I have to download it again. When I download it, I save it, drag it to the desktop and extract it there and then run in terminal, use option 1 and then option 2.
I realize forums contain a ton of duplicate posts but I really tried to research and follow all the guides before posting.
Does anyone have any advice?
Update:
Realized I forgot to add persistence to the LiveUSB drive. I'm going to try again.
Click to expand...
Click to collapse
Let me know if this soup kit route works. we have the exact same problem going on here... ill live install ubuntu as well, Ill try my hand here shortly, and give you feedback on my testing.
leroy329 said:
Let me know if this soup kit route works. we have the exact same problem going on here... ill live install ubuntu as well, Ill try my hand here shortly, and give you feedback on my testing.
Click to expand...
Click to collapse
No luck with adding persistence.
I get everything to to boot in Linux, followed all the instructions, but Soupkit still does not see my Kindle.
I've tried my factory cable and a regular cable. No luck
Some has changed though because now my Kindle logo light is solid bright whereas before it would blink and dim.
Good luck to you!
Well I've had a great dialogue with myself, but I fixed it by accident.
You guys do awesome work and I know its frustrating when people ask repeat questions. I thought I had truly given it my best shot before asking, but in the end it was an accident that seem to have fixed it, that and Skorpns factory cable LOL.
Right before I got ready to pitch it in the trash I figured I would try KFU one more time even though it wasn't seeing my Kindle. Device manager saw the ADB drivers in Android device though.
I plugged in the factory cable
Launched KFU
KFU said "offline"
Tried various options until I finally saw the install permanent root with superuser (option 2)
That did the trick
I then unplugged my factory cable from both the PC and KF and booted the KF into recovery
Plugged in a standard USB
I downloaded a ROM (Hashcodes and GAPPS) and side loaded them
That did it!
I'm not sure how or why since it said it was offline but it fixed it.
Can anyone shed light on why KFU said offline but it still took a root?
Also, regarding the factory cable, I read a ton of material on when to use it and why, but not really how. What I mean is when to plug in and when to revert to the standard cable. If I missed that, my apologies.
Copcheck said:
Well I've had a great dialogue with myself, but I fixed it by accident.
You guys do awesome work and I know its frustrating when people ask repeat questions. I thought I had truly given it my best shot before asking, but in the end it was an accident that seem to have fixed it, that and Skorpns factory cable LOL.
Right before I got ready to pitch it in the trash I figured I would try KFU one more time even though it wasn't seeing my Kindle. Device manager saw the ADB drivers in Android device though.
I plugged in the factory cable
Launched KFU
KFU said "offline"
Tried various options until I finally saw the install permanent root with superuser (option 2)
That did the trick
I then unplugged my factory cable from both the PC and KF and booted the KF into recovery
Plugged in a standard USB
I downloaded a ROM (Hashcodes and GAPPS) and side loaded them
That did it!
I'm not sure how or why since it said it was offline but it fixed it.
Can anyone shed light on why KFU said offline but it still took a root?
Also, regarding the factory cable, I read a ton of material on when to use it and why, but not really how. What I mean is when to plug in and when to revert to the standard cable. If I missed that, my apologies.
Click to expand...
Click to collapse
wow im def. gonna try this seeing how we have similar issues with my kindle fire being recognized with a reg usb and online in kfu but with a boot status of unknown and then not seeing it and status being offline when i plus in the factory cable. also with the regular cables it boots to the cm10 boot logo and then with the factory cable it stays at the kindlefire orange and white cable. only thing im confused on is where you say you
"I then unplugged my factory cable from both the PC and KF and booted the KF into recovery"
how did you reboot to recovery? or this was automatic after option 2? thanks and its awesome you were pretty much able to figure this out on your own. i feel i wont have the same luck
Remi85 said:
wow im def. gonna try this seeing how we have similar issues with my kindle fire being recognized with a reg usb and online in kfu but with a boot status of unknown and then not seeing it and status being offline when i plus in the factory cable. also with the regular cables it boots to the cm10 boot logo and then with the factory cable it stays at the kindlefire orange and white cable. only thing im confused on is where you say you
"I then unplugged my factory cable from both the PC and KF and booted the KF into recovery"
how did you reboot to recovery? or this was automatic after option 2? thanks and its awesome you were pretty much able to figure this out on your own. i feel i wont have the same luck
Click to expand...
Click to collapse
When I unplugged the factory cable from the PC and the KF, I could have done 1 of 2 things. Powercycle the KF and hold the power button down to get into TWRP or use a regular USB to side load a ROM and then load it.
Good luck to you, I hope you get it figured out.
Remi85 said:
wow im def. gonna try this seeing how we have similar issues with my kindle fire being recognized with a reg usb and online in kfu but with a boot status of unknown and then not seeing it and status being offline when i plus in the factory cable. also with the regular cables it boots to the cm10 boot logo and then with the factory cable it stays at the kindlefire orange and white cable. only thing im confused on is where you say you
"I then unplugged my factory cable from both the PC and KF and booted the KF into recovery"
how did you reboot to recovery? or this was automatic after option 2? thanks and its awesome you were pretty much able to figure this out on your own. i feel i wont have the same luck
Click to expand...
Click to collapse
If you're getting the Kindle Fire orange and white, you haven't installed the new bootloader. Rerun KFU with the Kindle in Fastboot (using Cable) and select install FireFireFire. This will give you the bootloader to reboot to recovery.
Edit: You might as well reinstall TWRP while you're at it, just to be safe.
Hi. I am really in a jam here. I have read a lot of documentation and still am not getting anywhere. I bought my sister a Kindle Fire for her birthday, and after reading the Kindle Fire for Beginner's Guide, I was able to successfully install Cyanogenmod 10.1 It was working fine, but I gave it some thought and decided she would be better off with the stock software, so I followed the instructions here to revert.
However, somewhere in that process I bricked the device. I went through the installing the Amazon software again in TWRP and told the device to reboot, but it is now stuck on the boot screen and will not respond to adb commands I send it.
I used the Kindle Fire Utility to install TWRP again, and it said it was successfully installed. I tried to boot into it through the Kindle Fire Utility menu, but it is still stuck.
It just so happens that I have a fastboot cable for this, so I plugged it in and tried to boot into recovery by issuing
C:\kfu\tools>fastboot oem idme bootmode 5001
It just says:
<waiting for device>
and nothing happens.
I don't know what else to do. I do think this factory cable put me in fastboot mode because the Windows device manager is showing "Android ADB Interface" (which according to Kindle Fire for Beginners is what it is supposed to say if the drivers are good and I am in fastboot mode), but I do not know how else to make use of this.
I am really stuck here, and I hope someone will take the time to help. My sister's birthday is in two days and I need to get this Kindle fixed and in the mail
farkuldi said:
Hi. I am really in a jam here. I have read a lot of documentation and still am not getting anywhere. I bought my sister a Kindle Fire for her birthday, and after reading the Kindle Fire for Beginner's Guide, I was able to successfully install Cyanogenmod 10.1 It was working fine, but I gave it some thought and decided she would be better off with the stock software, so I followed the instructions here to revert.
However, somewhere in that process I bricked the device. I went through the installing the Amazon software again in TWRP and told the device to reboot, but it is now stuck on the boot screen and will not respond to adb commands I send it.
I used the Kindle Fire Utility to install TWRP again, and it said it was successfully installed. I tried to boot into it through the Kindle Fire Utility menu, but it is still stuck.
It just so happens that I have a fastboot cable for this, so I plugged it in and tried to boot into recovery by issuing
C:\kfu\tools>fastboot oem idme bootmode 5001
It just says:
<waiting for device>
and nothing happens.
I don't know what else to do. I do think this factory cable put me in fastboot mode because the Windows device manager is showing "Android ADB Interface" (which according to Kindle Fire for Beginners is what it is supposed to say if the drivers are good and I am in fastboot mode), but I do not know how else to make use of this.
I am really stuck here, and I hope someone will take the time to help. My sister's birthday is in two days and I need to get this Kindle fixed and in the mail
Click to expand...
Click to collapse
First, welcome to Xda-developers
OK. So lets cover the basics.
http://forum.xda-developers.com/showthread.php?t=1428428
^ Download and run that tool. Its very useful for un-bricking your Kindle
Once that is done, reboot into recovery and wipe every things. (sorry, we're going to start you from fresh start)
I'm going to suggest you try to install this ROM
http://forum.xda-developers.com/showthread.php?t=2103278
The reason being that this one will give you the option to also wipe a few other places (including boot)
Now assuming you still want to keep with stock
http://forum.xda-developers.com/showthread.php?t=2211872
This is basically the stock ROM by its rooted.
Socially Uncensored said:
First, welcome to Xda-developers
OK. So lets cover the basics.
http://forum.xda-developers.com/showthread.php?t=1428428
^ Download and run that tool. Its very useful for un-bricking your Kindle
Once that is done, reboot into recovery and wipe every things. (sorry, we're going to start you from fresh start)
I'm going to suggest you try to install this ROM
http://forum.xda-developers.com/showthread.php?t=2103278
The reason being that this one will give you the option to also wipe a few other places (including boot)
Now assuming you still want to keep with stock
http://forum.xda-developers.com/showthread.php?t=2211872
This is basically the stock ROM by its rooted.
Click to expand...
Click to collapse
Thank you for your reply! I ran the Kindle Fire unbrick tool with the option "Stuck at logo," and it said "Congratulations, your Kindle should be unbricked. However, nothing had changed. So I ran it with the option "Other . . ." It said:
Code:
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
This part might take a while . . .
< waiting for device >
I have left it like that for ten minutes now and nothing is happening. Do you think it is working? I'll leave it alone for an hour or so I guess but I'm wondering.
BTW, for this I just used a regular USB cable and not the factory one. Is that right?
Thanks!
farkuldi said:
Thank you for your reply! I ran the Kindle Fire unbrick tool with the option "Stuck at logo," and it said "Congratulations, your Kindle should be unbricked. However, nothing had changed. So I ran it with the option "Other . . ." It said:
Code:
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
This part might take a while . . .
< waiting for device >
I have left it like that for ten minutes now and nothing is happening. Do you think it is working? I'll leave it alone for an hour or so I guess but I'm wondering.
BTW, for this I just used a regular USB cable and not the factory one. Is that right?
Thanks!
Click to expand...
Click to collapse
The unbrick program didn't work. It just stayed there t <waiting for device>. How can I use the fastboot cable to fix it?
Thanks.
I had the same problem before. It always says no device found. I tried different PC, finally in my XP PC it is detected and new ROM flashed in
Maybe you should try different PC
ezproxy said:
I had the same problem before. It always says no device found. I tried different PC, finally in my XP PC it is detected and new ROM flashed in
Maybe you should try different PC
Click to expand...
Click to collapse
I was thinking the same thing. Unfortunately I don't have another PC running Windows. All my others are running Linux, and I don't know how to get the drivers working.
I think I will borrow a laptop from a friend tomorrow and see if it works. It is my sister's 17th birthday today and her present is late!
In the meantime, though, does anyone know how I am supposed to use this fastboot cable? I have looked around and I see a lot of tutorials about how to unbrick without a fastboot cable, but none saying how to do it WITH one. I thought the cable was supposed to make it easier?
Thanks for the help.
farkuldi said:
I was thinking the same thing. Unfortunately I don't have another PC running Windows. All my others are running Linux, and I don't know how to get the drivers working.
I think I will borrow a laptop from a friend tomorrow and see if it works. It is my sister's 17th birthday today and her present is late!
In the meantime, though, does anyone know how I am supposed to use this fastboot cable? I have looked around and I see a lot of tutorials about how to unbrick without a fastboot cable, but none saying how to do it WITH one. I thought the cable was supposed to make it easier?
Thanks for the help.
Click to expand...
Click to collapse
First of all, Happy Birthday to your sister!
I think you may need install the firefirefire utility first to help you out of bootmode sucking. After you successfully reinstall the TWRP using unbrick utility, you need change the fastboot mode to normal boot, the firefirefire can help you choose,
here is the information may help you : http://forum.xda-developers.com/showthread.php?t=1668159
ezproxy said:
First of all, Happy Birthday to your sister!
I think you may need install the firefirefire utility first to help you out of bootmode sucking. After you successfully reinstall the TWRP using unbrick utility, you need change the fastboot mode to normal boot, the firefirefire can help you choose,
here is the information may help you : http://forum.xda-developers.com/showthread.php?t=1668159
Click to expand...
Click to collapse
I'd say you didn't read the previous posts.
Well, now the Kindle Fire is no longer being recognized by my computers. I borrowed another Windows computer like I said I would, but when I plug in the Kindle, the Device Manger does not even register it. Also, usually when I plug it in, the computer will realize I have plugged in a usb device and respond with that little pop up at the task bar, i.e. to let me know it sees a usb device and is trying to install driver, was not able to install drivers, or whatever. But now nothing. The computer doesn't even see it.
I have tried it on two different computers with three different cables and it's the same thing. I have restarted the computer and reinstalled the drivers over and over again and there is no difference. What is going on? It was seeing the Kindle fine before I tried the Unbricking Utility.
farkuldi said:
Well, now the Kindle Fire is no longer being recognized by my computers. I borrowed another Windows computer like I said I would, but when I plug in the Kindle, the Device Manger does not even register it. Also, usually when I plug it in, the computer will realize I have plugged in a usb device and respond with that little pop up at the task bar, i.e. to let me know it sees a usb device and is trying to install driver, was not able to install drivers, or whatever. But now nothing. The computer doesn't even see it.
I have tried it on two different computers with three different cables and it's the same thing. I have restarted the computer and reinstalled the drivers over and over again and there is no difference. What is going on? It was seeing the Kindle fine before I tried the Unbricking Utility.
Click to expand...
Click to collapse
I'm assuming you know for sure this was a 1st Generation Kindle, right?
I had this problem once and basically formatted my computer. The driver was the issue and I couldn't uninstall it completely. Using my drivers solved this. I get the feeling you're still trying to use the drivers that came with the utility (don't they're often trouble)
However, assuming you are using the correct drivers (the ones I linked for you).... Boot into TWRP and wipe everything. Don't just use the general, click the advance options and wipe everything (selecting all options manually).
No connect your Kindle and don't worry about it not showing up yet....
Mount your SSD (should suddenly find your kindle) and upload this ROM
http://forum.xda-developers.com/showthread.php?t=2211872
Now if you can't even load TWRP (when you turn on the Kindle, you'll need to hold the power button to bring up the menu, then quickly hit it a few times until its on recovery).... But if you can't load TWRP at all, its time to get a factory cable.
If you have a factory cable and still can't find the device (and assuming you're using the right drivers, on a fresh install) .... As someone else who knows how to do this. Because past that, all hope is lost.
Socially Uncensored said:
I'm assuming you know for sure this was a 1st Generation Kindle, right?
I had this problem once and basically formatted my computer. The driver was the issue and I couldn't uninstall it completely. Using my drivers solved this. I get the feeling you're still trying to use the drivers that came with the utility (don't they're often trouble)
However, assuming you are using the correct drivers (the ones I linked for you).... Boot into TWRP and wipe everything. Don't just use the general, click the advance options and wipe everything (selecting all options manually).
No connect your Kindle and don't worry about it not showing up yet....
Mount your SSD (should suddenly find your kindle) and upload this ROM
http://forum.xda-developers.com/showthread.php?t=2211872
Now if you can't even load TWRP (when you turn on the Kindle, you'll need to hold the power button to bring up the menu, then quickly hit it a few times until its on recovery).... But if you can't load TWRP at all, its time to get a factory cable.
If you have a factory cable and still can't find the device (and assuming you're using the right drivers, on a fresh install) .... As someone else who knows how to do this. Because past that, all hope is lost.
Click to expand...
Click to collapse
Hi, My name i Jonah and i have a Kindle fire (5th generation) That came stock with Amazon's Fire OS Bellini 5.1.1. I tried to flash Cm12 with the app FlashFire (https://www.youtube.com/watch?v=NaCBSuUuhRE&spfreload=10) and during the installation i noticed it stopped for a while and didnt do anything. So i waited then 10 minutes later i decided to turn it off and turn it back on to fix it, when it started to boot up it showed the Cm logo just like as if it was running Cm12. So i waited, maybe 5 min at the most and it still would not turn on. So i turned it off, went online to see ho to get out of a bootloop. Rootjunky said to Turn your Kindle off and run ADB and Fastboot as a command from where you installed your drivers. Then he said he said to enter Recovery mode by pressing vol down and the power button. It is suppose'd to say Recovery-Mode in the corner but it just kept showing the Amazon logo. Im worried i screwed up and broke my new tablet, i can't return it because it's against Amazon's policy to root or mod any content of Amazon's, Plus ADB isn't working i can only access fastboot. I tried fixing it with the stock charger also but how do i know what kind of Android charger should i use?
Gon Rouge said:
Hi, My name i Jonah and i have a Kindle fire (5th generation) That came stock with Amazon's Fire OS Bellini 5.1.1. I tried to flash Cm12 with the app FlashFire (https://www.youtube.com/watch?v=NaCBSuUuhRE&spfreload=10) and during the installation i noticed it stopped for a while and didnt do anything. So i waited then 10 minutes later i decided to turn it off and turn it back on to fix it, when it started to boot up it showed the Cm logo just like as if it was running Cm12. So i waited, maybe 5 min at the most and it still would not turn on. So i turned it off, went online to see ho to get out of a bootloop. Rootjunky said to Turn your Kindle off and run ADB and Fastboot as a command from where you installed your drivers. Then he said he said to enter Recovery mode by pressing vol down and the power button. It is suppose'd to say Recovery-Mode in the corner but it just kept showing the Amazon logo. Im worried i screwed up and broke my new tablet, i can't return it because it's against Amazon's policy to root or mod any content of Amazon's, Plus ADB isn't working i can only access fastboot. I tried fixing it with the stock charger also but how do i know what kind of Android charger should i use?
Click to expand...
Click to collapse
post in correct forum
Fire Index: Which Amazon (Kindle) Fire Do I have?
"Failed - Virus detected" Chrome wouldn't let me open it - if you're for real, please re-post the software.
jerry777888 said:
"Failed - Virus detected" Chrome wouldn't let me open it - if you're for real, please re-post the software.
Click to expand...
Click to collapse
Repost what?
Sent from my ocean using XDA Labs