Develop Bugs

[Q] Tried to put Fire back to Stock and now bricked

I looked at almost every thread I could see that sounds like my case but in every one the device is at least being recognized by USB on the computer, in my case it has absolutely no recognition.
I had custom gedeROM. gf didn't like it and so I decided to go back to stock.
within TWRP I did Factory reset, then installed the stock bin file that i renamed to update.zip. Install went through properly so I restarted.
Now it is frozen on Kindle Fire boot screen, and it won't go further. Attaching it to a computer with USB will power the Kindle on but the computer will not detect it, tried on 3 computers, Windows 7 and Linux. I have tried to use all forms of unbricking, everything except opening the Kindle. But since the device isn't being recognized by USB at all on any system I don't know what to do.
With a Factory cable help with this?
Thanks for any help.

slyphin said:
I looked at almost every thread I could see that sounds like my case but in every one the device is at least being recognized by USB on the computer, in my case it has absolutely no recognition.
I had custom gedeROM. gf didn't like it and so I decided to go back to stock.
within TWRP I did Factory reset, then installed the stock bin file that i renamed to update.zip. Install went through properly so I restarted.
Now it is frozen on Kindle Fire boot screen, and it won't go further. Attaching it to a computer with USB will power the Kindle on but the computer will not detect it, tried on 3 computers, Windows 7 and Linux. I have tried to use all forms of unbricking, everything except opening the Kindle. But since the device isn't being recognized by USB at all on any system I don't know what to do.
With a Factory cable help with this?
Thanks for any help.
Click to expand...
Click to collapse
In Linux type lsusb and see if your device is shown. It my be named something weird.
Sent from my Amazon Kindle Fire using xda app-developers app

Did you have adb and fastboot setup on linux when you tried?

I'm pretty sure I did, I used the firekit and that didn't work as well. how do I check if adb and fastboot are for sure running when in linux?

powerpoint45 said:
In Linux type lsusb and see if your device is shown. It my be named something weird.
Sent from my Amazon Kindle Fire using xda app-developers app
Click to expand...
Click to collapse
when i lsusb, it just sees my usb stick i booted ubuntu from

Installing Amazon's stock update.zip gets rid of FFF and TWRP, so at this point, your only choices are either getting a factory cable (recommended) or cracking open the case and resorting to the USB short trick + firekit.

OK, I have an order for the Factory cable coming so hopefully that will do the trick. Thanks

[Q] HELP!! Kindle fire stuck at boot logo, not recognized by windows

So i used the tutorial i found here:
http://rootkindlefire.com/kindle-fire-root/how-to-root-kindle-fire-6-3-1/
to try to root my kindle fire first gen. Well it froze at the logo after a fastboot command was sent. I have spent about 3 hours trying to fix it with no luck. ADB does not connect at all, windows says theres a problem with the hardware. I cant get any connections to it whatsoever. Even in linux.
I've tried these things:
1. ADB through windows
2. Kindle Fire Utility and all its options (never sees the kindle)
3. SoupKit and all its options (same issue, linux is unable to enumerate the device)
I URGENTLY need this kindle unbricked. My mom will kill me if she cant get to her birds to feed them (don't ask). She uses it every day, and i told her rooting would be nooo problem. Well now i'm screwed. Please help if there's anything that can be done to this.
Thanks Guys
Josh
Edit: Anyone with this issue, I rigged up a factory cable (http://forum.xda-developers.com/showthread.php?p=20380015) by crossing pins one and four with a breadtie and got really lucky, forced it back to normal mode from fastboot. It is the ONLY thing that will work in this case, i tried everything else!

hi
once the factory cable is connected, what do you do?
joshcrumley100 said:
So i used the tutorial i found here:
http://rootkindlefire.com/kindle-fire-root/how-to-root-kindle-fire-6-3-1/
to try to root my kindle fire first gen. Well it froze at the logo after a fastboot command was sent. I have spent about 3 hours trying to fix it with no luck. ADB does not connect at all, windows says theres a problem with the hardware. I cant get any connections to it whatsoever. Even in linux.
I've tried these things:
1. ADB through windows
2. Kindle Fire Utility and all its options (never sees the kindle)
3. SoupKit and all its options (same issue, linux is unable to enumerate the device)
I URGENTLY need this kindle unbricked. My mom will kill me if she cant get to her birds to feed them (don't ask). She uses it every day, and i told her rooting would be nooo problem. Well now i'm screwed. Please help if there's anything that can be done to this.
Thanks Guys
Josh
Edit: Anyone with this issue, I rigged up a factory cable (http://forum.xda-developers.com/showthread.php?p=20380015) by crossing pins one and four with a breadtie and got really lucky, forced it back to normal mode from fastboot. It is the ONLY thing that will work in this case, i tried everything else!
Click to expand...
Click to collapse

Flash a recovery in fastboot
Sent from my Amazon Kindle Fire

?
with the factory cable connected its not recognized
androvista said:
Flash a recovery in fastboot
Sent from my Amazon Kindle Fire
Click to expand...
Click to collapse

Once the device boots up into fat boot use a normal USB cable
Sent from my finger to your face

KF Stuck at Logo - Sorry

I know this has been covered thoroughly in this forum multiple times, and I have really tried to read as many threads as possible before asking.
I rooted my device months ago and finally got a Nexus 7 and want to give my KF to my kids but wanted it stock first. I must have done something in TWRP that removed my bootloader.
I have tried the unbrick tool, I ordered a factory cable from Skorpn (awesome work btw) and by using KFU, my PC can finally see my Kindle.
The problem I'm having is that none of the commands are working and it looks like the bootloader is either bad or completely gone.
It used to turn on and the logo stayed bright. After I used the factory cable it now turns on, blinks, and goes dim.
All the drivers loaded correctly and KFU see's it online.
When I try to reinstall TWRP through KFU it downloads, but is stuck at waiting for device.
***********************************************
* Activating Fastboot (4002) *
***********************************************
2433 KB/s (510876 bytes in 0.205s)
- exec '/system/bin/sh' failed: No such file or directory (2) -
- exec '/system/bin/sh' failed: No such file or directory (2) -
The kindle has been told to reboot in Fastboot Mode.
< waiting for device >
After reading further, I think I formatted too much and wiped the SD card partition. It doesn't seem like there is a bootloader at all.
Did I miss something in all the reading?
Thanks.

So after doing even further reading I found
http://forum.xda-developers.com/showthread.php?t=1638452
I connected the factory cable and the logo is now staying brightly lit, so I assume it's in FB Mode.
I downloaded TWRP based on the link and FFF, but now I don't know what to do with them.
I went to ADB's site and installed SDK, but I'm not sure how to get the cmd portion to sideload TWRP and then FFF.

I'm doing my best to following along in the instructions and went to the ADB site and installed SDK.
I saved it to my C drive but when I try to do the following, along with "adb devices,
c:\Android\android-sdk-windows>
I get:
'adb' is not recognized as an internal or external command,
operable program or batch file.
Update:
NVM, I had it in the wrong directory.
Once I got that figured out, I did an "adb devices" and no devices came back. Of course I have the factory cable connected and I'm not sure if that matters.
Update:
Ok, now I used a standard USB and it sees my device, but now the logo went back to going dim after reboot.

So it looks like my problem is fairly common, however forum searches don't seem to be helping.
It looks like I wiped too much in TWRP.
Now that I finally figured out ADB, I'm confused about the factory cable.
When it's connected ADB does not see my device but the logo is lit bright yellow. When I use a standard cable ADB sees the device but the turns on and goes dim but the logo is still there.
I've downloaded the ZIP files for TWP and FFF, but I can't seem to figure out how to side load them no matter what I do.

I'm about to give up on this.
I decided to go the Soupkit rout and installed ubuntu 11.10 and got my PC to boot to USB.
I followed all the directions but my device is always offline. The only thing I can think of is that the 3rd step says to reboot, when I reboot Soupkit is gone and I have to download it again. When I download it, I save it, drag it to the desktop and extract it there and then run in terminal, use option 1 and then option 2.
I realize forums contain a ton of duplicate posts but I really tried to research and follow all the guides before posting.
Does anyone have any advice?
Update:
Realized I forgot to add persistence to the LiveUSB drive. I'm going to try again.

Copcheck said:
I'm about to give up on this.
I decided to go the Soupkit rout and installed ubuntu 11.10 and got my PC to boot to USB.
I followed all the directions but my device is always offline. The only thing I can think of is that the 3rd step says to reboot, when I reboot Soupkit is gone and I have to download it again. When I download it, I save it, drag it to the desktop and extract it there and then run in terminal, use option 1 and then option 2.
I realize forums contain a ton of duplicate posts but I really tried to research and follow all the guides before posting.
Does anyone have any advice?
Update:
Realized I forgot to add persistence to the LiveUSB drive. I'm going to try again.
Click to expand...
Click to collapse
Let me know if this soup kit route works. we have the exact same problem going on here... ill live install ubuntu as well, Ill try my hand here shortly, and give you feedback on my testing.

leroy329 said:
Let me know if this soup kit route works. we have the exact same problem going on here... ill live install ubuntu as well, Ill try my hand here shortly, and give you feedback on my testing.
Click to expand...
Click to collapse
No luck with adding persistence.
I get everything to to boot in Linux, followed all the instructions, but Soupkit still does not see my Kindle.
I've tried my factory cable and a regular cable. No luck
Some has changed though because now my Kindle logo light is solid bright whereas before it would blink and dim.
Good luck to you!

Well I've had a great dialogue with myself, but I fixed it by accident.
You guys do awesome work and I know its frustrating when people ask repeat questions. I thought I had truly given it my best shot before asking, but in the end it was an accident that seem to have fixed it, that and Skorpns factory cable LOL.
Right before I got ready to pitch it in the trash I figured I would try KFU one more time even though it wasn't seeing my Kindle. Device manager saw the ADB drivers in Android device though.
I plugged in the factory cable
Launched KFU
KFU said "offline"
Tried various options until I finally saw the install permanent root with superuser (option 2)
That did the trick
I then unplugged my factory cable from both the PC and KF and booted the KF into recovery
Plugged in a standard USB
I downloaded a ROM (Hashcodes and GAPPS) and side loaded them
That did it!
I'm not sure how or why since it said it was offline but it fixed it.
Can anyone shed light on why KFU said offline but it still took a root?
Also, regarding the factory cable, I read a ton of material on when to use it and why, but not really how. What I mean is when to plug in and when to revert to the standard cable. If I missed that, my apologies.

Copcheck said:
Well I've had a great dialogue with myself, but I fixed it by accident.
You guys do awesome work and I know its frustrating when people ask repeat questions. I thought I had truly given it my best shot before asking, but in the end it was an accident that seem to have fixed it, that and Skorpns factory cable LOL.
Right before I got ready to pitch it in the trash I figured I would try KFU one more time even though it wasn't seeing my Kindle. Device manager saw the ADB drivers in Android device though.
I plugged in the factory cable
Launched KFU
KFU said "offline"
Tried various options until I finally saw the install permanent root with superuser (option 2)
That did the trick
I then unplugged my factory cable from both the PC and KF and booted the KF into recovery
Plugged in a standard USB
I downloaded a ROM (Hashcodes and GAPPS) and side loaded them
That did it!
I'm not sure how or why since it said it was offline but it fixed it.
Can anyone shed light on why KFU said offline but it still took a root?
Also, regarding the factory cable, I read a ton of material on when to use it and why, but not really how. What I mean is when to plug in and when to revert to the standard cable. If I missed that, my apologies.
Click to expand...
Click to collapse
wow im def. gonna try this seeing how we have similar issues with my kindle fire being recognized with a reg usb and online in kfu but with a boot status of unknown and then not seeing it and status being offline when i plus in the factory cable. also with the regular cables it boots to the cm10 boot logo and then with the factory cable it stays at the kindlefire orange and white cable. only thing im confused on is where you say you
"I then unplugged my factory cable from both the PC and KF and booted the KF into recovery"
how did you reboot to recovery? or this was automatic after option 2? thanks and its awesome you were pretty much able to figure this out on your own. i feel i wont have the same luck

Remi85 said:
wow im def. gonna try this seeing how we have similar issues with my kindle fire being recognized with a reg usb and online in kfu but with a boot status of unknown and then not seeing it and status being offline when i plus in the factory cable. also with the regular cables it boots to the cm10 boot logo and then with the factory cable it stays at the kindlefire orange and white cable. only thing im confused on is where you say you
"I then unplugged my factory cable from both the PC and KF and booted the KF into recovery"
how did you reboot to recovery? or this was automatic after option 2? thanks and its awesome you were pretty much able to figure this out on your own. i feel i wont have the same luck
Click to expand...
Click to collapse
When I unplugged the factory cable from the PC and the KF, I could have done 1 of 2 things. Powercycle the KF and hold the power button down to get into TWRP or use a regular USB to side load a ROM and then load it.
Good luck to you, I hope you get it figured out.

Remi85 said:
wow im def. gonna try this seeing how we have similar issues with my kindle fire being recognized with a reg usb and online in kfu but with a boot status of unknown and then not seeing it and status being offline when i plus in the factory cable. also with the regular cables it boots to the cm10 boot logo and then with the factory cable it stays at the kindlefire orange and white cable. only thing im confused on is where you say you
"I then unplugged my factory cable from both the PC and KF and booted the KF into recovery"
how did you reboot to recovery? or this was automatic after option 2? thanks and its awesome you were pretty much able to figure this out on your own. i feel i wont have the same luck
Click to expand...
Click to collapse
If you're getting the Kindle Fire orange and white, you haven't installed the new bootloader. Rerun KFU with the Kindle in Fastboot (using Cable) and select install FireFireFire. This will give you the bootloader to reboot to recovery.
Edit: You might as well reinstall TWRP while you're at it, just to be safe.

[Q] Kindle Fire bricked, have factory cable but can't boot recovery, please help!

Hi. I am really in a jam here. I have read a lot of documentation and still am not getting anywhere. I bought my sister a Kindle Fire for her birthday, and after reading the Kindle Fire for Beginner's Guide, I was able to successfully install Cyanogenmod 10.1 It was working fine, but I gave it some thought and decided she would be better off with the stock software, so I followed the instructions here to revert.
However, somewhere in that process I bricked the device. I went through the installing the Amazon software again in TWRP and told the device to reboot, but it is now stuck on the boot screen and will not respond to adb commands I send it.
I used the Kindle Fire Utility to install TWRP again, and it said it was successfully installed. I tried to boot into it through the Kindle Fire Utility menu, but it is still stuck.
It just so happens that I have a fastboot cable for this, so I plugged it in and tried to boot into recovery by issuing
C:\kfu\tools>fastboot oem idme bootmode 5001
It just says:
<waiting for device>
and nothing happens.
I don't know what else to do. I do think this factory cable put me in fastboot mode because the Windows device manager is showing "Android ADB Interface" (which according to Kindle Fire for Beginners is what it is supposed to say if the drivers are good and I am in fastboot mode), but I do not know how else to make use of this.
I am really stuck here, and I hope someone will take the time to help. My sister's birthday is in two days and I need to get this Kindle fixed and in the mail

farkuldi said:
Hi. I am really in a jam here. I have read a lot of documentation and still am not getting anywhere. I bought my sister a Kindle Fire for her birthday, and after reading the Kindle Fire for Beginner's Guide, I was able to successfully install Cyanogenmod 10.1 It was working fine, but I gave it some thought and decided she would be better off with the stock software, so I followed the instructions here to revert.
However, somewhere in that process I bricked the device. I went through the installing the Amazon software again in TWRP and told the device to reboot, but it is now stuck on the boot screen and will not respond to adb commands I send it.
I used the Kindle Fire Utility to install TWRP again, and it said it was successfully installed. I tried to boot into it through the Kindle Fire Utility menu, but it is still stuck.
It just so happens that I have a fastboot cable for this, so I plugged it in and tried to boot into recovery by issuing
C:\kfu\tools>fastboot oem idme bootmode 5001
It just says:
<waiting for device>
and nothing happens.
I don't know what else to do. I do think this factory cable put me in fastboot mode because the Windows device manager is showing "Android ADB Interface" (which according to Kindle Fire for Beginners is what it is supposed to say if the drivers are good and I am in fastboot mode), but I do not know how else to make use of this.
I am really stuck here, and I hope someone will take the time to help. My sister's birthday is in two days and I need to get this Kindle fixed and in the mail
Click to expand...
Click to collapse
First, welcome to Xda-developers
OK. So lets cover the basics.
http://forum.xda-developers.com/showthread.php?t=1428428
^ Download and run that tool. Its very useful for un-bricking your Kindle
Once that is done, reboot into recovery and wipe every things. (sorry, we're going to start you from fresh start)
I'm going to suggest you try to install this ROM
http://forum.xda-developers.com/showthread.php?t=2103278
The reason being that this one will give you the option to also wipe a few other places (including boot)
Now assuming you still want to keep with stock
http://forum.xda-developers.com/showthread.php?t=2211872
This is basically the stock ROM by its rooted.

Socially Uncensored said:
First, welcome to Xda-developers
OK. So lets cover the basics.
http://forum.xda-developers.com/showthread.php?t=1428428
^ Download and run that tool. Its very useful for un-bricking your Kindle
Once that is done, reboot into recovery and wipe every things. (sorry, we're going to start you from fresh start)
I'm going to suggest you try to install this ROM
http://forum.xda-developers.com/showthread.php?t=2103278
The reason being that this one will give you the option to also wipe a few other places (including boot)
Now assuming you still want to keep with stock
http://forum.xda-developers.com/showthread.php?t=2211872
This is basically the stock ROM by its rooted.
Click to expand...
Click to collapse
Thank you for your reply! I ran the Kindle Fire unbrick tool with the option "Stuck at logo," and it said "Congratulations, your Kindle should be unbricked. However, nothing had changed. So I ran it with the option "Other . . ." It said:
Code:
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
This part might take a while . . .
< waiting for device >
I have left it like that for ten minutes now and nothing is happening. Do you think it is working? I'll leave it alone for an hour or so I guess but I'm wondering.
BTW, for this I just used a regular USB cable and not the factory one. Is that right?
Thanks!

farkuldi said:
Thank you for your reply! I ran the Kindle Fire unbrick tool with the option "Stuck at logo," and it said "Congratulations, your Kindle should be unbricked. However, nothing had changed. So I ran it with the option "Other . . ." It said:
Code:
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
This part might take a while . . .
< waiting for device >
I have left it like that for ten minutes now and nothing is happening. Do you think it is working? I'll leave it alone for an hour or so I guess but I'm wondering.
BTW, for this I just used a regular USB cable and not the factory one. Is that right?
Thanks!
Click to expand...
Click to collapse
The unbrick program didn't work. It just stayed there t <waiting for device>. How can I use the fastboot cable to fix it?
Thanks.

I had the same problem before. It always says no device found. I tried different PC, finally in my XP PC it is detected and new ROM flashed in
Maybe you should try different PC

ezproxy said:
I had the same problem before. It always says no device found. I tried different PC, finally in my XP PC it is detected and new ROM flashed in
Maybe you should try different PC
Click to expand...
Click to collapse
I was thinking the same thing. Unfortunately I don't have another PC running Windows. All my others are running Linux, and I don't know how to get the drivers working.
I think I will borrow a laptop from a friend tomorrow and see if it works. It is my sister's 17th birthday today and her present is late!
In the meantime, though, does anyone know how I am supposed to use this fastboot cable? I have looked around and I see a lot of tutorials about how to unbrick without a fastboot cable, but none saying how to do it WITH one. I thought the cable was supposed to make it easier?
Thanks for the help.

farkuldi said:
I was thinking the same thing. Unfortunately I don't have another PC running Windows. All my others are running Linux, and I don't know how to get the drivers working.
I think I will borrow a laptop from a friend tomorrow and see if it works. It is my sister's 17th birthday today and her present is late!
In the meantime, though, does anyone know how I am supposed to use this fastboot cable? I have looked around and I see a lot of tutorials about how to unbrick without a fastboot cable, but none saying how to do it WITH one. I thought the cable was supposed to make it easier?
Thanks for the help.
Click to expand...
Click to collapse
First of all, Happy Birthday to your sister!
I think you may need install the firefirefire utility first to help you out of bootmode sucking. After you successfully reinstall the TWRP using unbrick utility, you need change the fastboot mode to normal boot, the firefirefire can help you choose,
here is the information may help you : http://forum.xda-developers.com/showthread.php?t=1668159

ezproxy said:
First of all, Happy Birthday to your sister!
I think you may need install the firefirefire utility first to help you out of bootmode sucking. After you successfully reinstall the TWRP using unbrick utility, you need change the fastboot mode to normal boot, the firefirefire can help you choose,
here is the information may help you : http://forum.xda-developers.com/showthread.php?t=1668159
Click to expand...
Click to collapse
I'd say you didn't read the previous posts.

Well, now the Kindle Fire is no longer being recognized by my computers. I borrowed another Windows computer like I said I would, but when I plug in the Kindle, the Device Manger does not even register it. Also, usually when I plug it in, the computer will realize I have plugged in a usb device and respond with that little pop up at the task bar, i.e. to let me know it sees a usb device and is trying to install driver, was not able to install drivers, or whatever. But now nothing. The computer doesn't even see it.
I have tried it on two different computers with three different cables and it's the same thing. I have restarted the computer and reinstalled the drivers over and over again and there is no difference. What is going on? It was seeing the Kindle fine before I tried the Unbricking Utility.

farkuldi said:
Well, now the Kindle Fire is no longer being recognized by my computers. I borrowed another Windows computer like I said I would, but when I plug in the Kindle, the Device Manger does not even register it. Also, usually when I plug it in, the computer will realize I have plugged in a usb device and respond with that little pop up at the task bar, i.e. to let me know it sees a usb device and is trying to install driver, was not able to install drivers, or whatever. But now nothing. The computer doesn't even see it.
I have tried it on two different computers with three different cables and it's the same thing. I have restarted the computer and reinstalled the drivers over and over again and there is no difference. What is going on? It was seeing the Kindle fine before I tried the Unbricking Utility.
Click to expand...
Click to collapse
I'm assuming you know for sure this was a 1st Generation Kindle, right?
I had this problem once and basically formatted my computer. The driver was the issue and I couldn't uninstall it completely. Using my drivers solved this. I get the feeling you're still trying to use the drivers that came with the utility (don't they're often trouble)
However, assuming you are using the correct drivers (the ones I linked for you).... Boot into TWRP and wipe everything. Don't just use the general, click the advance options and wipe everything (selecting all options manually).
No connect your Kindle and don't worry about it not showing up yet....
Mount your SSD (should suddenly find your kindle) and upload this ROM
http://forum.xda-developers.com/showthread.php?t=2211872
Now if you can't even load TWRP (when you turn on the Kindle, you'll need to hold the power button to bring up the menu, then quickly hit it a few times until its on recovery).... But if you can't load TWRP at all, its time to get a factory cable.
If you have a factory cable and still can't find the device (and assuming you're using the right drivers, on a fresh install) .... As someone else who knows how to do this. Because past that, all hope is lost.

Socially Uncensored said:
I'm assuming you know for sure this was a 1st Generation Kindle, right?
I had this problem once and basically formatted my computer. The driver was the issue and I couldn't uninstall it completely. Using my drivers solved this. I get the feeling you're still trying to use the drivers that came with the utility (don't they're often trouble)
However, assuming you are using the correct drivers (the ones I linked for you).... Boot into TWRP and wipe everything. Don't just use the general, click the advance options and wipe everything (selecting all options manually).
No connect your Kindle and don't worry about it not showing up yet....
Mount your SSD (should suddenly find your kindle) and upload this ROM
http://forum.xda-developers.com/showthread.php?t=2211872
Now if you can't even load TWRP (when you turn on the Kindle, you'll need to hold the power button to bring up the menu, then quickly hit it a few times until its on recovery).... But if you can't load TWRP at all, its time to get a factory cable.
If you have a factory cable and still can't find the device (and assuming you're using the right drivers, on a fresh install) .... As someone else who knows how to do this. Because past that, all hope is lost.
Click to expand...
Click to collapse
Hi, My name i Jonah and i have a Kindle fire (5th generation) That came stock with Amazon's Fire OS Bellini 5.1.1. I tried to flash Cm12 with the app FlashFire (https://www.youtube.com/watch?v=NaCBSuUuhRE&spfreload=10) and during the installation i noticed it stopped for a while and didnt do anything. So i waited then 10 minutes later i decided to turn it off and turn it back on to fix it, when it started to boot up it showed the Cm logo just like as if it was running Cm12. So i waited, maybe 5 min at the most and it still would not turn on. So i turned it off, went online to see ho to get out of a bootloop. Rootjunky said to Turn your Kindle off and run ADB and Fastboot as a command from where you installed your drivers. Then he said he said to enter Recovery mode by pressing vol down and the power button. It is suppose'd to say Recovery-Mode in the corner but it just kept showing the Amazon logo. Im worried i screwed up and broke my new tablet, i can't return it because it's against Amazon's policy to root or mod any content of Amazon's, Plus ADB isn't working i can only access fastboot. I tried fixing it with the stock charger also but how do i know what kind of Android charger should i use?

Gon Rouge said:
Hi, My name i Jonah and i have a Kindle fire (5th generation) That came stock with Amazon's Fire OS Bellini 5.1.1. I tried to flash Cm12 with the app FlashFire (https://www.youtube.com/watch?v=NaCBSuUuhRE&spfreload=10) and during the installation i noticed it stopped for a while and didnt do anything. So i waited then 10 minutes later i decided to turn it off and turn it back on to fix it, when it started to boot up it showed the Cm logo just like as if it was running Cm12. So i waited, maybe 5 min at the most and it still would not turn on. So i turned it off, went online to see ho to get out of a bootloop. Rootjunky said to Turn your Kindle off and run ADB and Fastboot as a command from where you installed your drivers. Then he said he said to enter Recovery mode by pressing vol down and the power button. It is suppose'd to say Recovery-Mode in the corner but it just kept showing the Amazon logo. Im worried i screwed up and broke my new tablet, i can't return it because it's against Amazon's policy to root or mod any content of Amazon's, Plus ADB isn't working i can only access fastboot. I tried fixing it with the stock charger also but how do i know what kind of Android charger should i use?
Click to expand...
Click to collapse
post in correct forum
Fire Index: Which Amazon (Kindle) Fire Do I have?

"Failed - Virus detected" Chrome wouldn't let me open it - if you're for real, please re-post the software.

jerry777888 said:
"Failed - Virus detected" Chrome wouldn't let me open it - if you're for real, please re-post the software.
Click to expand...
Click to collapse
Repost what?
Sent from my ocean using XDA Labs

cm10 logo stuck, boot status unknown, ect

ok first here is my problem
I have a Kindle fire that is stuck at the boot logo for cm10 from what ive found out due to not clearing the cache prior to rebooting
also with KFU running and the KF hooked up it reads adb status online and boot status unknown. when hooked up through the regular usb cable it goes through to the cm10 boot logo and is recognized by the computer and kfu
when hooked up trhough the factory cable its neither recognized by my computer or KFU and only stays at the kidlefire orange and white logo.
NOW how i got here
little sister got the KF and of course wanted more out of it. rooted and installed twrp and proceeded to flash roms through twrp SHE DIDNT INSTALL FFF. she said she got it stuck first on the AOSP? boot logo also what we later found out from not clearing the cache. then was able to get in through KFU to reboot back up to recovery and flash back to factory setting but still with twrp installed. well then went on to flash cm10 again without clearing the cache AFTER flashing the final gapps before rebooting and got it stuck yet again at the boot logo.
so with her being out of town i wanted to fix it for her so i got a factory cable and what not but wanted to try first through kfu so i hook it up and its recognized and what not well when i go to push 1 for bootmodes i accidently hit 4 i think and starting installing twrp AGAIN while it was STUCK at the cm10 boot logo. and that was the last thing that got me stuck to where the boot status isnt noticed
WHAT IVE TRIED. everything
kfu doesnt find the file for bootmodes now so i tried command prompts and thats saying device offline
so i got a factory cable and that makes it to where the computer AND kfu dont recognize it at all???
i also get with the regualr usb cable MTP USB device FAILED with the litt;le yellow caution triangle under Portable Devices but
shows it under Android Phone as Android Composite ADB interface???
but as stated with the factory cable it IMMEDIATELY says USB DEVICE NOT RECOGNIZED
with regular power it boots and gets stuck at the cm10 logo screen
with factory cable it only goes and stops at the orange and white kindle fire logo
i hope ive provided everything i can and hope someone can help out. thanks guys and its been some great reading on this site

Remi85 said:
with factory cable it only goes and stops at the orange and white kindle fire logo
Click to expand...
Click to collapse
This means your bootloader is not the FireFireFire.
Remi85 said:
i also get with the regualr usb cable MTP USB device FAILED with the litt;le yellow caution triangle under Portable Devices but
shows it under Android Phone as Android Composite ADB interface
Click to expand...
Click to collapse
Reinstall Kindle Fire Drivers from the Kindle Fire Utility package. Unzip your download and run the install drivers batch file. Then try to plug the Kindle in again.
Remi85 said:
but as stated with the factory cable it IMMEDIATELY says USB DEVICE NOT RECOGNIZED
with regular power it boots and gets stuck at the cm10 logo screen
Click to expand...
Click to collapse
Best way to get things working here is to run Kindle fire utility, run the "intall FireFireFire" option, it will say waiting on device, with your kindle off, attach the Factory cable to the kindle and then plug it into the PC. Hopefully this will get the bootloader installed, and while you're at it, go ahead and reinstall TWRP, as it shouldn't cause an issue. After you get the bootloader and TWRP installed, you can wipe caches and see if that helps.

mthous01 said:
This means your bootloader is not the FireFireFire.
Reinstall Kindle Fire Drivers from the Kindle Fire Utility package. Unzip your download and run the install drivers batch file. Then try to plug the Kindle in again.
Best way to get things working here is to run Kindle fire utility, run the "intall FireFireFire" option, it will say waiting on device, with your kindle off, attach the Factory cable to the kindle and then plug it into the PC. Hopefully this will get the bootloader installed, and while you're at it, go ahead and reinstall TWRP, as it shouldn't cause an issue. After you get the bootloader and TWRP installed, you can wipe caches and see if that helps.
Click to expand...
Click to collapse
hey thanks mthous
Ya i told her if she would have installed the FFF that alot of this would be a whole bunch easier.
As for installing the drivers ive done that and it IS being noticed by the computer as i stated with the reg. usb cable, In KFU its read as ADB Status ONLINE but bootmode status UNKNOWN. so its being recognized just i think since the Kindle is stuck in whatever bootmode that its not being read.
ONLY WHEN i plug it in with the Factory cable is it completely invisible to the computer and unrecognized IMMEDIATLEY after attached to the KF.
But im going to try that last piece of advice but i had tried something similar with going to the KFU and choosing option 1 then choosing i believe option 2 for recovery mode then hit enter and it said "waiting for device" BUT as usual it didnt even read that the device was connected with the Factory Cable. IS there a special different kind of driver for the FACTORY cable that i dont know about? MAYBE its not made right???? i bought it from a reputable ebay dealer. and it DOES alter the state of the KF by keeping it at the KF logo instead of going on through to the CM10 boopt logo.
i dont know.
ANYONE reading this with some idea please chime in cause its gotten to the point where i just turn the KF on to see it light up and watch the cm10 boot animation thinking of the day that i will one day be able to use it :crying::crying:

so im just going to try this http://forum.xda-developers.com/showthread.php?t=1430038
seems my problem is the drivers and what not so hey why not right. SUCKS i had to search so many places to even know FULLY what pokey (the op) was talking about.
such as making a bootable usb. finding the diagram on how to short out the kindle and things of that but i fully feel confident that this will fix it. also ive included my links incase anyone else is having this problem and isnt as good at searching.
http://forum.xda-developers.com/showpost.php?p=19762674&postcount=51
http://www.youtube.com/watch?annota...&feature=iv&src_vid=RQLI-p-tRRQ&v=nt7ovI_CLXk
link from the vid
http://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3-/
ill let you know what happens CROSS YOUR FINGERS this is the last step before i pay someone to fix it.... ANYONE in TX!!!!

What was your outcome? I'm having the same exact issue, and I'm pulling my hair out!

i have one other option you might wanna try.
using fastboot cable, get to the kindle logo and plug it in to your computer.
delete your .android folder located at c:\users\%your user%\.android
open kfu and it should say offline
run the option to install FFF that might do it.
let me know what happens

goldflame09 said:
i have one other option you might wanna try.
using fastboot cable, get to the kindle logo and plug it in to your computer.
delete your .android folder located at c:\users\%your user%\.android
open kfu and it should say offline
run the option to install FFF that might do it.
let me know what happens
Click to expand...
Click to collapse
Didn't work. Kindle installs as a USB MTP Device.

bondosho said:
Didn't work. Kindle installs as a USB MTP Device.
Click to expand...
Click to collapse
now you cant get into recovery right?

I can't get anywhere, or flash anything. It just boots up, and goes to the off center CM logo.
Sent from my SPH-L710 using xda app-developers app

Might be a stupid question to ask - but it seems like you already have firefirefire due to previous flashing and etc, have you tried pushing the power button repeatedly during the boot to change the bootmode?
This can be an easy way to get into recovery and do a complete wipe then reflash. I had an issue similar to this and it was because I forgot to do my wipes because I was focused on getting my device recognized by KFU.

sorry been lazy and i gotta search where all the links were now... but def going to do this today sometime.....oh ya links are in my post lol ok well i WILL get back to see if this "drastic way" works is it wierd that it doesnt seem that complicated to do it this way??? i feel like im missing something like it should be alot harder. idk ill find out and get back.

zane203 said:
Might be a stupid question to ask - but it seems like you already have firefirefire due to previous flashing and etc, have you tried pushing the power button repeatedly during the boot to change the bootmode?
This can be an easy way to get into recovery and do a complete wipe then reflash. I had an issue similar to this and it was because I forgot to do my wipes because I was focused on getting my device recognized by KFU.
Click to expand...
Click to collapse
I'll try that.
Sent from my SPH-L710 using xda app-developers app

And that didn't work
Here's a quick video:
https://www.youtube.com/watch?v=u5pv-vsUihA