Related
TrevE you do great work.. and yea i know that this is my own fault for flashing and im not blaming you... BUT i installed (and bought the pro version) your "logging test app v7" and ran the ICQ remove... rebooted my phone like it said to and now its a paper weight... I gets stuck at the "Samsung screen". I tried putting it into "download mode" and odin back to stock and nothing. It goes into the download mode screen but my PC will not pick it up at all. Yes i have the right drivers (I am not a complete noob). I tried it with odin3 v1.85 and v1.61.
Any advice on how to fix it? Any of you guys know if sprint will be able to tell it was rooted when I take it in for a replacement (I have protection).
Phone specs..
epic 4g
stock II22 rooted
persistence pays off. after trying to get my phone into CWM about 50 times it finaly worked! flashing a new rom now... I will not be reloading the app.. but im not going to get a refund either.. keep the buck, you do great things! But if you figure out why this app does not like the epic 4g let me know.
Did you use this? http://forum.xda-developers.com/showthread.php?t=1247108
TrevE develops for HTC devices as far as I'm aware.
If you are looking for the original mod for CIQ removal by k0nane, then go here: http://forum.xda-developers.com/showthread.php?t=1340083
Try removing the battery for a bit before going into download mode. Try both with wall/usb cable connected and/or sd card removed.
http://forum.xda-developers.com/showthread.php?t=1359647
First off, if you don't blame Trev you should change the title...kind of rude. CIQ removal is not the same for all phones. You should have read more. Now to restore your phone follow this thread and if Odin isn't recognizing it no matter what then go to post 2 on using Heimdall to restore your phone:
http://forum.xda-developers.com/showthread.php?t=1052813
I have had many of issues with odin, from not picking up to my screen turning random colors during odin flash.
You wouldn't by chabce have windows 7 64bit because its a pain with that os for some reason.
I would suggest uninstalling the drivers and reinstalling them and it should run through the steps to rehook the drivers for odin, does for me everytime I flash with odin I have to reinstall drivers
Sent from my SPH-D700 using XDA App
Of coerce i dont balm treve... Thats the risk we take when we start to mess with our phones! But his app did crash it!! I sent him a PM so hopefully he will figure it out.. He does amazing this for Android, i have nothing but respect for him! If he tells me he has a problem with my title ill change it..
The first thing i did was take out the SD card but thanks for the heads up.
Odin has never once given me any problems and it now picks up my phone fine.
Thanks for the battery advice! I was only taking out for a minute or so, Ill try it for longer if i have any more troubles.
The phone is working great now.. just had to try to get into CWM about 50 times.
So say you don't blame TrevE yet your title says you do.
Pull the battery leave it out for a say or so and try again.
NissanNick said:
Of coerce i dont balm treve... Thats the risk we take when we start to mess with our phones! But his app did crash it!! I sent him a PM so hopefully he will figure it out.. He does amazing this for Android, i have nothing but respect for him! If he tells me he has a problem with my title ill change it..
The first thing i did was take out the SD card but thanks for the heads up.
Odin has never once given me any problems and it now picks up my phone fine.
Thanks for the battery advice! I was only taking out for a minute or so, Ill try it for longer if i have any more troubles.
The phone is working great now.. just had to try to get into CWM about 50 times.
Click to expand...
Click to collapse
Dude. That is not for our phones. HTC only. TrevE has nothing to do with samsung phones.
Let's just throw an htc sense framework over touchwiz...it'll be fine!
*scoffs*
sent from my always aosp epic
zanderman112 said:
Dude. That is not for our phones. HTC only. TrevE has nothing to do with samsung phones.
Click to expand...
Click to collapse
He should change the title to "I'm an idiot and bricked my phone using an HTC mod by TrevE because I can't read". Much more accurate.
Sent from my SPH-D700 using XDA App
Clockworkmod should still work if you installed a bad framework.
Sent from my SPH-D700 using XDA App
marcusant said:
Clockworkmod should still work if you installed a bad framework.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
He said it did.
sent from my always aosp epic
USB Not working & LOST Clockwork Mod Recovery
Assistance please!!! Need to take back Epic to Sprint.
I was trying to flash the lastest recovery on my my wifes phone and in the process lost recovery(see images) I downloaded ROM Manager and tried reflashing and nothing. I need to take the phone back to SPRINT because the USB stopped working, No ODIN, Wont connect via USB at all........
I need to return system to stock with no USB support at all. Please direct me to the right thread if you have heard of this before.
you used the wrong method for the wrong phone!
NissanNick said:
Of coerce i dont balm treve... Thats the risk we take when we start to mess with our phones! But his app did crash it!! I sent him a PM so hopefully he will figure it out.. He does amazing this for Android, i have nothing but respect for him! If he tells me he has a problem with my title ill change it..
Click to expand...
Click to collapse
No dude, his app didn't crash it. You did because you used the wrong method for the wrong phone!
The app couldnt have.
Sent from my SPH-D700 using XDA App
Looks like to me that you are one stock recovery so u should be Ok... someone correct me if im wrong
[email protected] said:
Assistance please!!! Need to take back Epic to Sprint.
I was trying to flash the lastest recovery on my my wifes phone and in the process lost recovery(see images) I downloaded ROM Manager and tried reflashing and nothing. I need to take the phone back to SPRINT because the USB stopped working, No ODIN, Wont connect via USB at all........
I need to return system to stock with no USB support at all. Please direct me to the right thread if you have heard of this before.
Click to expand...
Click to collapse
Sent from my SPH-D700 using XDA App
phatryan69 said:
Looks like to me that you are one stock recovery so u should be Ok... someone correct me if im wrong
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
He was on clockworkmod and he is still on a custom rom...
Sent from my SPH-D700 using XDA App
This is not a beat treve app up.. This was just to get advice on how to unbrick my phone and see if maybe he could fix it for the epic... This thread is great lol. I named the title that to mainly get everyone attention because i was worried about not having a working phone....
I dont blame treve or his app really... as a matter of fact i took full responsibility for it.
And yes i did brick my phone because im i moron that used the wrong app... but i am still finding all this great.
Hello all! I've been trying to fix my phone for a few days, and can't seem to do it, so I thought I'd make a post regarding it.
I believe the beginning of this originated after trying to go back to gingerbread from fc15 ICS. To learn from my mistakes, this is NOT good, right? lol. probably because fc15 wasn't made for gingerbread?
I was able to get into CWM, but I couldn't perform a recovery or install a new ROM. At this time (after trying a whole bunch of things to fix my device), I may or may not be rooted, but I'm almost certain I am not because I can't get into CWM. If I have to lose all of my data, I guess I will (I didn't have an SD card at the time - just got one), but if there's any way I would like to keep my data. Also, at this point, I'm at the "formware upgrade encountered an issue. please select revoery mode in kies and try again". I have been able to get rid of this screen in the past, but I'd like to know the best rout to go from here.
I have read about bricked devices for awhile now, but to attempt to link the hazy definition I have with experience, is my device bricked?
Please help me!
Thank you.
tf201
I'm sorry, just now seeing the sticky regarding bricked device prevention. But I'd like to know how to identify a bricked device (besides not being able to do anything at all - which isn't my case), and if I have any option at this point.
tf201
andddlay said:
I'm sorry, just now seeing the sticky regarding bricked device prevention. But I'd like to know how to identify a bricked device (besides not being able to do anything at all - which isn't my case), and if I have any option at this point.
tf201
Click to expand...
Click to collapse
If you can get into download mode then Odin back to el26 like most instructions say to. Once you have a working GB then you can make a decision on where to go from there. Others might have better advice as that's gonna kill all you're data.
Swyped from my E4GT running Blazer 4.1 using xda premium
CyberpodS2 said:
If you can get into download mode then Odin back to el26 like most instructions say to. Once you have a working GB then you can make a decision on where to go from there. Others might have better advice as that's gonna kill all you're data.
Swyped from my E4GT running Blazer 4.1 using xda premium
Click to expand...
Click to collapse
thanks for the reply! after flashing stockcwm-el26, i was able to get back into cwm. however, from there i'm still having trouble. it will not boo. i'm still going to try a whole bunch of stuff lol
tf201
Hopefully someone will comment on my suggestion... If you can get into cwm then I would use calc's format all zip then flash a ROM that has a great record of smooth install.I personally have never had a problem with Blazer so that's what I would flash. Like I said, hopefully someone will either agree or have a better solution before you go with my idea. Good luck and make sure if you get it going you share your leanings!
Swyped from my E4GT running Blazer 4.1 using xda premium
Best bet is to download one of sfhub's one click root methods since your phone can still get into download mode. Doesn't matter what u already have on ur phone as his method will wipe all and replace all as long as you can get into download mode with your computer recognizing ur phone.
Sent from my SPH-D710 using XDA
dante32278 said:
Best bet is to download one of sfhub's one click root methods since your phone can still get into download mode. Doesn't matter what u already have on ur phone as his method will wipe all and replace all as long as you can get into download mode with your computer recognizing ur phone.
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Yea what he said... Much easier than screwing around with flashing stuff like I suggested.
Swyped from my E4GT running Blazer 4.1 using xda premium
sorry for responding so late!
thank you both very much. i tried the program, and was still unable to recover the device - it always hung right at the end, unfortunately. a replacement device is in the mail, and i should get it very soon (thankfully for free).
another question i suppose i would like to ask...on cwm, it says i can mount internal storage as a mass-storage-device. when i try to do this, nothing pops up. is there a way to do this and, potentially, recovering my data?
tf201
So i tried to update my AOKP with just using my phone. And after the reboot.. nothing happened. So i did a battery pull and now when I turn on my baby the led goes blue and stays there.. frozen. No access to recovery or download.
Black screen and blue led.. so yeah.
What I'm asking is.. there's no way of coming back?
Sent from my Old Evo using xda premium
Also.. I semi-bricked before and was able to fix via download mode.. so I know my way around.
Sent from my PC36100 using xda premium
When you updated AOKP you flashed the EL26 CWM kernel as per the instructions in all AOSP roms up until now? Both the recovery in AOKP 37 and the Zip for AOKP 39 (as far as I am aware) are not safe to flash in ICS Recovery.
BLoD is a sign that the bootloader is borked. Normally this is something fixable via JTAG. But it is also caused at Random by the Super Brick bug which can not be fixed. Sounds like you flashed not only an unsafe Zip but in an unsafe recovery and if you tell me you factory reset that would be even worse.
Our phone has a bug in its eMMC firmware which needs to be patched. All of the former ICS leaks have had kernels that can trigger it and last i checked only the Nighlies for CM9 have a safe updater binary used in conjunction with a made safe recovery are generally safe to flash from ICS. Which is exactly why the threads tell you to use the EL26 CWM kernel which if mobile can be flashed via mobile odin. Failure to do so will eventually at random trigger the bug.
Blue LED and not able to get phone into Odin mode = Hard Brick
another one bites the dust......i just don't know how the directions could be any more clear on flashing ICS ROM's. Maybe we need a sticky in every forum in bold letters that says:
"READ ME BEFORE FLASHING!"
I read the warnings and all that jazz. It was just a bad download thanks to the 4G. Mistakes happen. Relax @ above poster.
Yeah I went about it the right way. I have insurance with Sprint, hopefully I'll get lucky and get a new phone.
Thanks to the rest that answered.
Sent from my PC36100 using xda premium
I agree with Rican Bomba... Not everyone is a Android hacking Guru. We are all trying to learn here. I bricked my phone and i did follow QBking77's instructions (Who i believe to be the best at explaining things thoroughly in his videos) yet, there are so many post that aren't clear. I had force closes like crazy on AOKP and before i found the one poster that said don't wipe in ICS... I had done it and lights out R.I.P. First E4GT. I have flashed way too many times to count without incident. Some posters put more info on how not to brick than others. I followed QBking's method to a tee and something was still wrong... I don't blame him (He makes things crystal clear and is great at what he does), things happened and that was that. I learned something from a poster who was very clear and i won't make the mistake again (not to mention I'm leaving AOKP alone lol). Take it easy on these guys, they will learn soon with a little friendly direction
Rican Bx Bomba said:
I read the warnings and all that jazz. It was just a bad download thanks to the 4G. Mistakes happen. Relax @ above poster.
Yeah I went about it the right way. I have insurance with Sprint, hopefully I'll get lucky and get a new phone.
Thanks to the rest that answered.
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
Never never never never download a ROM through Mobile Network... and if you do, make sure you check the md5. I think almost all of my 4G ROM downloads have been corrupt
iniz94 said:
Never never never never download a ROM through Mobile Network... and if you do, make sure you check the md5. I think almost all of my 4G ROM downloads have been corrupt
Click to expand...
Click to collapse
Flashaholic lol no computer access at my job and at home at the moment.
Sent from my PC36100 using xda premium
The whole process is pretty simple on what I have done. I will explain my situation here and my question that has got be baffled.
So it all started about two weeks ago, where I was flashing LiquidSmooth on my phone. I had a Touch-type CWM. It isn't mega old but it's pretty old for CWM, I haven't updated in a while (as i've seen there are updates to recent ones).
Anywho, I did a complete wipe, used the darkside wipe, alongside with the darkside cache wipe.
I think this was my fault, so please correct me anyone if I am wrong here. I accidentally hit "reboot phone" instead of "reboot bootloader"
I got a permabrick from this whole ordeal. It was a permabrick because It said QHSUSB_DLOAD in the device manager, looking this up further confirmed my reasoning. I didn't want to jtag because that invovles removing the phone to pieces and soldering on wires etc. etc.
So I resorted to send it out to Samsung.
All is well when it came back. I made sure this time the whole phone was setup properly.
So I use Odin install for CWM and SU was installed via CWM. I install an older version of CWM (non-touch, i believe 1st revision as i've posted in one of the threads).
I kept stock ROM, everything was working okay and suddenly, KERPLUNK, it went back into permanent brick after I deleted cache partition, dalvik cache, and battery cache wipe. I didn't do fix permissions or anything, just hit reboot afterwards.
This is a super head scratcher here..... Anyone know where I went wrong?
Any insight here is greatly appreciated! :good:
P.S. I am now sending in my phone TWICE to Samsung for repairs.
If you are on the most up to date CWM, do not use the scripts. They are no longer needed, and will cause problems( hard brick though, never heard of) The second time, im stumped. I suggest go to TWRP and ditch the scripts. Latest TWRP does not need it
LoopDoGG79 said:
If you are on the most up to date CWM, do not use the scripts. They are no longer needed, and will cause problems( hard brick though, never heard of) The second time, im stumped. I suggest go to TWRP and ditch the scripts. Latest TWRP does not need it
Click to expand...
Click to collapse
I finally jumped in the water and flashed twrp! Yay!
Sent from my SAMSUNG-SGH-T989 using xda premium
All the steps you say you did don't point to a brick. But one thing caught my eye! You said you were flashing liquidsmooth? What File did you flash? Did it have Hercules in the name? Because if it didn't then it's not for our phone.. I only ask because a lot of other people made that mistake
Sent from my SGH-T989 using xda premium
rymanh said:
All the steps you say you did don't point to a brick. But one thing caught my eye! You said you were flashing liquidsmooth? What File did you flash? Did it have Hercules in the name? Because if it didn't then it's not for our phone.. I only ask because a lot of other people made that mistake
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
great call on that I had to educate a few users that the d2tmo is not for our phone but indeed the S3. Good catch on your part and it sounds like user error as well
LoopDoGG79 said:
If you are on the most up to date CWM, do not use the scripts. They are no longer needed, and will cause problems( hard brick though, never heard of) The second time, im stumped. I suggest go to TWRP and ditch the scripts. Latest TWRP does not need it
Click to expand...
Click to collapse
Could you please educate me with a link referring to what TWRP is? Sorry, i'm still fairly new to the scene and all i've ever been educated upon is CWM.
suaverc118 said:
I finally jumped in the water and flashed twrp! Yay!
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
Nice! What is TWRP and how is it like?
rymanh said:
All the steps you say you did don't point to a brick. But one thing caught my eye! You said you were flashing liquidsmooth? What File did you flash? Did it have Hercules in the name? Because if it didn't then it's not for our phone.. I only ask because a lot of other people made that mistake
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
I've flashed the hercules ROM. I know this for sure because Liquidsmooth was working, it was extremely glitchy (playing games gave me pixelated actions sometimes, and using something like gameCIH/Game Guardian was unworkable). So i decided to ditch it and was getting ready to flash Jedi Mind Trick.
After the whole hard bricking ordeal, I decided to stick to stock rom, and even on that, I just flashed CWM and SU ONLY. Rebooted, and deleted the cache's (like i've posted to you) with absolutely no success. It baffled me that I bricked the phone AGAIN too!
playya said:
great call on that I had to educate a few users that the d2tmo is not for our phone but indeed the S3. Good catch on your part and it sounds like user error as well
Click to expand...
Click to collapse
Yes..... there is something wrong, i feel it is a user error also, but i'm very unsure where to even start
Once again, all of your insight is well appreciated! I just do not want to hardbrick my phone AGAIN and have to send it to Samsung. I am not allowed to even think of a replacement because this was a b-day present a year or two ago from my fiance.
You say that it is bricked again. Do you mean by that, that you cannot get into recovery?
Sent from my SAMSUNG-SGH-T989 using xda premium
XxGoKoUxX said:
Could you please educate me with a link referring to what TWRP is? Sorry, i'm still fairly new to the scene and all i've ever been educated upon is CWM.
Nice! What is TWRP and how is it like?
I've flashed the hercules ROM. I know this for sure because Liquidsmooth was working, it was extremely glitchy (playing games gave me pixelated actions sometimes, and using something like gameCIH/Game Guardian was unworkable). So i decided to ditch it and was getting ready to flash Jedi Mind Trick.
After the whole hard bricking ordeal, I decided to stick to stock rom, and even on that, I just flashed CWM and SU ONLY. Rebooted, and deleted the cache's (like i've posted to you) with absolutely no success. It baffled me that I bricked the phone AGAIN too!
Yes..... there is something wrong, i feel it is a user error also, but i'm very unsure where to even start
Once again, all of your insight is well appreciated! I just do not want to hardbrick my phone AGAIN and have to send it to Samsung. I am not allowed to even think of a replacement because this was a b-day present a year or two ago from my fiance.
Click to expand...
Click to collapse
Flash this in recovery, reboot recovery, and you will have TWRP!!
TWRP 2.3.1.1
DM_Sledge said:
You say that it is bricked again. Do you mean by that, that you cannot get into recovery?
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
Yes, it is perma-bricked, meaning the only method of fixing the brick is jtagg'ing
Upon plugging it into device manager, I get the prompt "QHSUSB_DLOAD" and phone doesn't even boot on no matter what combinations I make.
LoopDoGG79 said:
Flash this in recovery, reboot recovery, and you will have TWRP!!
TWRP 2.3.1.1
Click to expand...
Click to collapse
Thank you LoopDo, I will do this after I get my phone home again.
I have this phone, and none of the steps you listed would brick the device. Even with no ROM on the phone, you should still be able to get into recovery.
Is there something you aren't telling us?
Sent from my Galaxy Nexus using xda premium
Nope, wouldn't be a reason why I would lie because then the problem will never be resolved.... I'm kind of nervous on reflashing ONE more time after the phone comes home again....
The phone has been fixed once AGAIN, and it is in the process of being shipped back to me.
Phone will be home Wednesday and I will give it ONE more try
Wish me luck!
P.S. my PC has been glitchy lately, so that MAY or MAY NOT contribute to the permabrick, then again the brick doesn't happen until I flash stuff via CWM.
P.S.S. I've since re-installed Win 7 again, it hasn't been glitchy since
XxGoKoUxX said:
Nope, wouldn't be a reason why I would lie because then the problem will never be resolved.... I'm kind of nervous on reflashing ONE more time after the phone comes home again....
The phone has been fixed once AGAIN, and it is in the process of being shipped back to me.
Phone will be home Wednesday and I will give it ONE more try
Wish me luck!
P.S. my PC has been glitchy lately, so that MAY or MAY NOT contribute to the permabrick, then again the brick doesn't happen until I flash stuff via CWM.
P.S.S. I've since re-installed Win 7 again, it hasn't been glitchy since
Click to expand...
Click to collapse
You most likely flashed the Wrong Liquidsmooth ROM (incompatible Kernel), and it hard bricked the phone. It happened to me the same way, and I had to send it in for JTAG.
I have bricked my phone installing the Liquidsmooth ROM too. I downloaded the wrong ROM, though. The thread should have a big ****in warning to double check the ROM you are about to download, otherwise your phone is a toast. There were more people who bricked their phones by installing the Liquidsmooth.
Well, I got it back from the warranty and the phone looks good. Installed that Liquidsmooth again and played for a day. Tried other JB ROMs. Most of them are OK in terms of battery life and smoothness, but there is something wrong with the signal. People always say my voice isn't clear. I got tired of all this BS and testing new ROMs and went to back to ICS and won't look back, not anytime.
Don't use darkside scripts, btw. You don't need that anymore.
I'd like to say thank you for everyone's patience. All of your insight is more than helpful!
DroidDonX said:
You most likely flashed the Wrong Liquidsmooth ROM (incompatible Kernel), and it hard bricked the phone. It happened to me the same way, and I had to send it in for JTAG.
Click to expand...
Click to collapse
I might have, but the one i downloaded (which is still on the phone's memory card) is a hercules ROM. Either way on my second try there was a hard brick also, in return of which I had to resend it in. The second try was just simply: Odin---->CWM---->Root---->SU---->wipe cache partition+fix permissions+wipe dalvik cache via CWM (not the super scripts).
cipsaz said:
I have bricked my phone installing the Liquidsmooth ROM too. I downloaded the wrong ROM, though. The thread should have a big ****in warning to double check the ROM you are about to download, otherwise your phone is a toast. There were more people who bricked their phones by installing the Liquidsmooth.
Well, I got it back from the warranty and the phone looks good. Installed that Liquidsmooth again and played for a day. Tried other JB ROMs. Most of them are OK in terms of battery life and smoothness, but there is something wrong with the signal. People always say my voice isn't clear. I got tired of all this BS and testing new ROMs and went to back to ICS and won't look back, not anytime.
Don't use darkside scripts, btw. You don't need that anymore.
Click to expand...
Click to collapse
Thanks again for your insight I think i'm done with flashing for a little bit for now.... I kind of want as factory of a JB Rom as possible. :good:
If anyone has any idea where I can get that, please let me know as my Stock ICS is a bit laggy at times, with the facial recognition system, it lags even worse!
rymanh said:
All the steps you say you did don't point to a brick. But one thing caught my eye! You said you were flashing liquidsmooth? What File did you flash? Did it have Hercules in the name? Because if it didn't then it's not for our phone.. I only ask because a lot of other people made that mistake
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
that just happened to me today with liquid smooth. i had to unroot, flash stock, and start over. im pretty sure i got it from goo.im under hercules. unfortunate mislabeling? oh yeah, and if your phone shows anything other than nothing, youre not hard bricked. thats why its called Hercules, i think. ive been soft bricked so many times from dumb **** like. ****ing with the governors and all that **** cm gives you the option to do when there aint even a 1080p camera that works fully = / lol <3 Cm I Love Yew!! But yeah, odin will set you free!!!
OK ofcourse as all noobs do when they start a noob thread they state that they are a noob... Well I am a noob. and I need help as we noobs tend to ask for. I Apologize but I have done a fair share of reading and before I go of and destroy the phone further I wanted to give my own thread a try.
ok...
So I got this ATT GS3 everything was cool from the store but I wanted to reverse Apps (I Tinker with code here and there). Which would require a simple root. Great... Followed the Simple self explanatory TUT "How to root your phone without tripping the flash Counter". Started doing my thing blah,blah,blah. should have been satisfied. (Here is where the Noob Kicks In). Saw how sick the liquid smooth rom was. loved the look was just tired of stock. so I did it. flashed the rom (No Backup whatsoever just exported contact list :crying At a first glance I was in love still doing my thing.... then I started noticing the glitches (mainly video related). got a newborn and could never just bust out the camera and play proud daddy. So I decided to go back. this is where the big problem Happened. My PC doesn't recognize the Phone via USB(I've tried 4 other computers). Ive read atleast 10 threads and they all say I should go in the dialer but no one has a custom ROM. So Now I cant even debug apps on my phone. I don't know what to do?
From 4.1.2 to Liquid Smooth 4.2.2
Please Help
Sorry if that seems long.
Flash a different rom via recovery.
Sent from my SGH-I747 using Tapatalk 4 Beta
Domoo said:
Flash a different rom via recovery.
Sent from my SGH-I747 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Thank you for the speedy reply can u give me any suggestions. I would like to go back to just the plain Rooted stock Image. also CWM does not work on the phone
theSyth said:
Thank you for the speedy reply can u give me any suggestions. I would like to go back to just the plain Rooted stock Image. also CWM does not work on the phone
Click to expand...
Click to collapse
'm not an expert but it sounds to me like you will need to use odin as described in this thread.
http://forum.xda-developers.com/showthread.php?t=1739426
Hope that helps
Abbyjack said:
'm not an expert but it sounds to me like you will need to use odin as described in this thread.
http://forum.xda-developers.com/showthread.php?t=1739426
Hope that helps
Click to expand...
Click to collapse
Yes Using Odin would be a dream but my PC does not recognize the phone.... so IM stuck. there is a ODIN App now does anyone think I should give that a try?. Like I sed I just don't want to make things worst. all suggestions would be helpful
Do you have android debugging checked under developer settings? If no, try that. Had that problem awhile back and that cleared it. Also, have you tried using another USB cable to connect to your computer? Also have run into problems connecting to the computer because of that. Mobile Odin might be your only option if you can get it on your phone. Just search and read carefully.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
ryankgrant said:
Do you have android debugging checked under developer settings? If no, try that. Had that problem awhile back and that cleared it. Also, have you tried using another USB cable to connect to your computer? Also have run into problems connecting to the computer because of that. Mobile Odin might be your only option if you can get it on your phone. Just search and read carefully.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Yea ive done all that debugging stuff. I'm just gonna do the mobile ODIN.Downloading it now. Wish me luck
Good luck buddy, haha.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
122 omiinfo
ok so I used mobile odin to flash the stock image back on the phone... For Future reference After you flash stock image you go back into the phone in recovery mode and wipe all data (Cache,Dalvic, Factory Reset) I had a crazy issue that side tracked me for about 45 minutes. I got a Flashing Samsung Logo. just put it like this I was already on craigslist looking for another phone. anyway USB debugging still doesn't work but. atleast im back to stock incase I gotta deal with Samsung or AT&T I can prolly slide through
Weird.
When you connect your phone to your computer does it charge? Ive had this problem recently and the phone would charge while connected to the computer, I just couldn't use mass storage. Buying a new cable fixed it though. I'm at a loss.
Maybe now you're on stock try the dialer commands you mentioned in the O.P.. If you haven't already.
Anyway, good luck. if you figure it you should post what you did.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app