Develop Bugs

[Q] ODIN freezes at factory.fs

Hello all,
This is my first post to XDA and I'm having some serious issues. I have searched eveywhere to try and find an answer but with no luck. I was trying to install chris41 odin efo2plus rom/kernel, and odin froze at modem.bin. I didn't know what to do. I unplugged the usb cable, pulled the battery and tried again. However, this time it froze at factory.fs being installed. I am using the new ODIN (1.82). I have tried running as admin, running in xp sp2 compatibility mode with admin, I've changed USB ports, and even changed USB cables, although I've never had a problem with ODIN and the Palm Pre cable that I've been using. I'm stuck. My phone won't boot, and I can't get it to ODIN anything. Even tried to ODIN DI18 stock, and still freezes at factory.fs. I was on Bonsai with EXT4, and chris41's rom is RFS. Don't know if that has anything to do with it? I am completely confused. Any help is GREATLY appreciated.

Just keep trying bro... if it worked before it'll work again Odin is just fussy...

GrStead123 said:
Hello all,
This is my first post to XDA and I'm having some serious issues. I have searched eveywhere to try and find an answer but with no luck. I was trying to install chris41 odin efo2plus rom/kernel, and odin froze at modem.bin. I didn't know what to do. I unplugged the usb cable, pulled the battery and tried again. However, this time it froze at factory.fs being installed. I am using the new ODIN (1.82). I have tried running as admin, running in xp sp2 compatibility mode with admin, I've changed USB ports, and even changed USB cables, although I've never had a problem with ODIN and the Palm Pre cable that I've been using. I'm stuck. My phone won't boot, and I can't get it to ODIN anything. Even tried to ODIN DI18 stock, and still freezes at factory.fs. I was on Bonsai with EXT4, and chris41's rom is RFS. Don't know if that has anything to do with it? I am completely confused. Any help is GREATLY appreciated.
Click to expand...
Click to collapse
Try running it without the battery in the phone. Open Odin plug phone in without battery and then go into download mode. Put your files in appropriate place and run Odin with only auto reboot checked. I have three epics and one of them will actually not work at all in Odin unless I have the battery out. Worth a try.
Sent from my SPH-D700 using XDA Premium App

Try using qbking77's video on youtube
http://www.youtube.com/watch?v=YLMlYuwTj6w&feature=youtube_gdata_player
Sent from my Evo Killer using XDA Premium App

Ok, well, lets start at where the files are supposed to go. Every rom I've ODIN'd before, I just put the tar in the phone section. Never put a pit or anything else with it. Is this correct? Second, usually when I ODIN a rom, it comes up with a little progress bar on the phone showing how far along the process is. I've tried now about 20 times after the first ODIN, and I haven't gotten a progress bar yet. Should I be worried about that?

GrStead123 said:
Ok, well, lets start at where the files are supposed to go. Every rom I've ODIN'd before, I just put the tar in the phone section. Never put a pit or anything else with it. Is this correct? Second, usually when I ODIN a rom, it comes up with a little progress bar on the phone showing how far along the process is. I've tried now about 20 times after the first ODIN, and I haven't gotten a progress bar yet. Should I be worried about that?
Click to expand...
Click to collapse
After reading this ... use the advice of the post above yours...

My phone did the same thing until I saw this video then it clicked.... you gotta flash the kernel in the bootloader area and the rom in the pda area at the same time.....DOH
Sent from my Evo Killer using XDA Premium App

theduce102 said:
My phone did the same thing until I saw this video then it clicked.... you gotta flash the kernel in the bootloader area and the rom in the pda area at the same time.....DOH
Sent from my Evo Killer using XDA Premium App
Click to expand...
Click to collapse
Do NOT flash the debug kernal!

LunaticWolf said:
Do NOT flash the debug kernal!
Click to expand...
Click to collapse
Why not.... I flashed it and I didn't have any problems.....
Sent from my Evo Killer using XDA Premium App

If you don't wanna use odin then I recommend odin'ing back to ec05 and root get cwm3.1.0.1 and flashing the ef02 zip that we recently got....
Sent from my Evo Killer using XDA Premium App

After following qbking's video and putting the tar in pda instead of phone, and putting the pit in, it now fails even earlier in the process. The status bar comes up on my phone, but as soon as it goes to write cache.fs, it fails. ODIN either comes up and says FAIL in the red box, or ODIN completely crashes. And, same thing as before, I've tried diff USB, rebooted computer, in xp mode, with admin, without admin. I'm starting to think my phone is a brick.

theduce102 said:
Why not.... I flashed it and I didn't have any problems.....
Sent from my Evo Killer using XDA Premium App
Click to expand...
Click to collapse
HAHA it says dont use it in video in annotations i mean come on already as well as in noobs thread its for debugging purposes and will eat your battery alive.
Please read things this is why people have issues and wonder why and then complain its so simple to read by using your eyes
Not being angry but just trying to point out that, this is why noobs either brick or get terrible results.

I got it. I don't know why, but for some reason I had to have Re-Partition, Auto-Reboot, and F. Reset Time all checked, as opposed to only Auto-Reboot. I'm now on EC05. Thanks all for your input. I really do appreciate it.

it may be your usb cable. Are you using the factory samsung cable? if so that was the reason why most of my odin's were failing. Try a generic usb cable from monoprice or something and it may help you the same way it helped me!

Edit: forget it
Sent from my Evo Killer using XDA Premium App

theduce102 said:
It didn't kill my battery at all and flashing the kernel was the only way that the original ef02 leak flashed through odin for me.... so you might wanna wait before you troll on someone which I see you do in every thread I see you post in..... Im not a noob and read these forums word for word everyday and try to help where no one else will.... shove it...
Sent from my Evo Killer using XDA Premium App
Click to expand...
Click to collapse
IF YOU READ WORD FOR WORD read this then
http://forum.xda-developers.com/showpost.php?p=14813947&postcount=1
DO NOT FLASH DEBUG KERNEL
EVEN IN VIDEO it says do not flash.
You think you have a good battery but it would be better if you didn't flash it
Dont call someone a troll if you don't wanna read 100%
Im simply trying to explain and help you out. Several people told you don't flash the debug kernel were all just trying to help each other out.

One more thought!
I realize this thread is long dead but i found it using google looking for a solution to this exact issue, so i will add some input from my own personal experience.
Make sure you are using a fully charged battery. Also if you have multiple batteries try swapping between them. I have 2 counterfeit and one authentic battery, using the counterfeits causes problems in odin for me.
Also you may need to repartition if you are coming from a newer rom that is not BML

Need help! Can't boot phone

Hello all! I've been trying to fix my phone for a few days, and can't seem to do it, so I thought I'd make a post regarding it.
I believe the beginning of this originated after trying to go back to gingerbread from fc15 ICS. To learn from my mistakes, this is NOT good, right? lol. probably because fc15 wasn't made for gingerbread?
I was able to get into CWM, but I couldn't perform a recovery or install a new ROM. At this time (after trying a whole bunch of things to fix my device), I may or may not be rooted, but I'm almost certain I am not because I can't get into CWM. If I have to lose all of my data, I guess I will (I didn't have an SD card at the time - just got one), but if there's any way I would like to keep my data. Also, at this point, I'm at the "formware upgrade encountered an issue. please select revoery mode in kies and try again". I have been able to get rid of this screen in the past, but I'd like to know the best rout to go from here.
I have read about bricked devices for awhile now, but to attempt to link the hazy definition I have with experience, is my device bricked?
Please help me!
Thank you.
tf201

I'm sorry, just now seeing the sticky regarding bricked device prevention. But I'd like to know how to identify a bricked device (besides not being able to do anything at all - which isn't my case), and if I have any option at this point.
tf201

andddlay said:
I'm sorry, just now seeing the sticky regarding bricked device prevention. But I'd like to know how to identify a bricked device (besides not being able to do anything at all - which isn't my case), and if I have any option at this point.
tf201
Click to expand...
Click to collapse
If you can get into download mode then Odin back to el26 like most instructions say to. Once you have a working GB then you can make a decision on where to go from there. Others might have better advice as that's gonna kill all you're data.
Swyped from my E4GT running Blazer 4.1 using xda premium

CyberpodS2 said:
If you can get into download mode then Odin back to el26 like most instructions say to. Once you have a working GB then you can make a decision on where to go from there. Others might have better advice as that's gonna kill all you're data.
Swyped from my E4GT running Blazer 4.1 using xda premium
Click to expand...
Click to collapse
thanks for the reply! after flashing stockcwm-el26, i was able to get back into cwm. however, from there i'm still having trouble. it will not boo. i'm still going to try a whole bunch of stuff lol
tf201

Hopefully someone will comment on my suggestion... If you can get into cwm then I would use calc's format all zip then flash a ROM that has a great record of smooth install.I personally have never had a problem with Blazer so that's what I would flash. Like I said, hopefully someone will either agree or have a better solution before you go with my idea. Good luck and make sure if you get it going you share your leanings!
Swyped from my E4GT running Blazer 4.1 using xda premium

Best bet is to download one of sfhub's one click root methods since your phone can still get into download mode. Doesn't matter what u already have on ur phone as his method will wipe all and replace all as long as you can get into download mode with your computer recognizing ur phone.
Sent from my SPH-D710 using XDA

dante32278 said:
Best bet is to download one of sfhub's one click root methods since your phone can still get into download mode. Doesn't matter what u already have on ur phone as his method will wipe all and replace all as long as you can get into download mode with your computer recognizing ur phone.
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Yea what he said... Much easier than screwing around with flashing stuff like I suggested.
Swyped from my E4GT running Blazer 4.1 using xda premium

sorry for responding so late!
thank you both very much. i tried the program, and was still unable to recover the device - it always hung right at the end, unfortunately. a replacement device is in the mail, and i should get it very soon (thankfully for free).
another question i suppose i would like to ask...on cwm, it says i can mount internal storage as a mass-storage-device. when i try to do this, nothing pops up. is there a way to do this and, potentially, recovering my data?
tf201

My Galaxy S II issue

hey guys,
( I know that there is another thread here asking that same question, but actually the questioner didn't get the perfect answer , that's why I ask this question again, I really need your help )
please I have a problem in my device,
I have Samsung Galaxy S 2 and the problem is when I switch it off after that
the phone will turn itself ON automatically, in another words, I can't switch it off.
please, can anyone tell me the reason or the solution of this problem ?
( knowing that there is no Samsung Center in my country to fix the phone for me)
thank you so much.

Do you have stock, or a custom rom? if stock, are you rooted?
Sent from my SGH-T989 using xda premium

J.Rawand said:
hey guys,
( I know that there is another thread here asking that same question, but actually the questioner didn't get the perfect answer , that's why I ask this question again, I really need your help )
please I have a problem in my device,
I have Samsung Galaxy S 2 and the problem is when I switch it off after that
the phone will turn itself ON automatically, in another words, I can't switch it off.
please, can anyone tell me the reason or the solution of this problem ?
( knowing that there is no Samsung Center in my country to fix the phone for me)
thank you so much.
Click to expand...
Click to collapse
What happens after you do a battery pull? Try that leave it out for a few seconds and see if it turns itself on again, essentially it shouldn't be able to unless your hardware button is stuck/sticky.
Is your phone insured ?

If you are on a custom rom it could be a bad download. Check the MD5 checksums and verify that your download was legitimate. Other than that. If you ARE NOT rooted, I suggest you read MULTIPLE tutorials and root your phone in addition to adding a custom ROM.
May I suggest Juggernaut V5.0. Or if you like ICS I suggest Blackedition or NexusMod
Best of luck

icepally said:
What happens after you do a battery pull? Try that leave it out for a few seconds and see if it turns itself on again, essentially it shouldn't be able to unless your hardware button is stuck/sticky.
Is your phone insured ?
Click to expand...
Click to collapse
well actually I did that, but it didn't work. no my phone is not insured
but what you meant by saying that '' my hardware button is stuck ? '' sorry for that.

Illuminatiii_X said:
If you are on a custom rom it could be a bad download. Check the MD5 checksums and verify that your download was legitimate. Other than that. If you ARE NOT rooted, I suggest you read MULTIPLE tutorials and root your phone in addition to adding a custom ROM.
May I suggest Juggernaut V5.0. Or if you like ICS I suggest Blackedition or NexusMod
Best of luck
Click to expand...
Click to collapse
well I actually I installed a custom rom before, but for now I am on the original 2.3.4 version. I prefer ICS, I will try Both Blackedition or Nexus mod, I really appreciate your help thank you man.

J.Rawand said:
well actually I did that, but it didn't work. no my phone is not insured
but what you meant by saying that '' my hardware button is stuck ? '' sorry for that.
Click to expand...
Click to collapse
he means that the power button might be stuck. try booting into recovery, and if your phone automatically selects reboot, you know your power button is stuck.
that's somewhere to start.

J.Rawand said:
well actually I did that, but it didn't work. no my phone is not insured
but what you meant by saying that '' my hardware button is stuck ? '' sorry for that.
Click to expand...
Click to collapse
Take the Sim card and external SD card out, too. Have a drink. Put your phone back together
Sent from my SGH-T989 using xda premium

ive had this issue with darksides ROM went away I think after a bit
Sent from my SGH-T989D using XDA

This happened to my mytouch 4g.. Once u press power it turns on automativally right away.. I tried switching multiple roms and even tried unrooting it and putting it back to stock but it still happened... After many complaints tmobile insurance too it back and even gave me a brand new sensation free of charge
Sent from my SGH-T989 using xda premium

Give this a go... Back up your device beforehand.
Download Samsung Kies. Put you phone into download mode. Open Kies, and under "Tools" menu, select "Emergency firmware recovery". This will completely restore your device to stock. If you still have issues afterward, its a hardware problem.
Edit: You WILL lose root with this method. But you'll also get a definitive answer...

Unroot it and install stock
Sent from my SGH-T989 using xda premium

Is your phone plugged in when reboot? What are you charging it with? A usb cable or an actual charger?
Sent from my SGH-T989 using xda premium

I would try flashing a new ROM and especially a new kernel. Try to do it over ADB if you cant get it through recovery.

[Q] Sprint Galaxy S III Rooted/Installed ROM... Now won't power on. Help!

Hi everyone. I'm new to the forum and I'm looking for a little help today.
I rooted my new Sprint Galaxy S III using Odin3-v3.04, and CWM_SuperUser_v3.0.7. Afterwards I rebooted and all was good.
I then downloaded I9300_Omega_v6.0_XXALF6 ROM and loaded on my phone and rebooted into recovery to install the ROM. I went through the install process, selected remove bloatware and installed. When finished I checked the reboot phone and clicked finish. The phone turned off and didn't ever turn back on.
I have pulled the battery and tried to power on using recovery, download mode and just power but nothing works.
Anyone have any idea what I can do?
Thank you for your time and help.

alexanderd said:
Hi everyone. I'm new to the forum and I'm looking for a little help today.
I rooted my new Sprint Galaxy S III using Odin3-v3.04, and CWM_SuperUser_v3.0.7. Afterwards I rebooted and all was good.
I then downloaded I9300_Omega_v6.0_XXALF6 ROM and loaded on my phone and rebooted into recovery to install the ROM. I went through the install process, selected remove bloatware and installed. When finished I checked the reboot phone and clicked finish. The phone turned off and didn't ever turn back on.
I have pulled the battery and tried to power on using recovery, download mode and just power but nothing works.
Anyone have any idea what I can do?
Thank you for your time and help.
Click to expand...
Click to collapse
development area has a thread for that:
http://forum.xda-developers.com/showthread.php?t=1727171
ONLY use ROMs that you'll find here in these threads not the I9300; that s a different phone from ours.

Thanks I'll check there.

Honestly I was waiting for this to happen gid luck restoring it phone
Sent from my SPH-L710 using XDA

But seriously I hope you learned your lesson and will read and hope you get your phone fixed or replaced
Sent from my Sprint Galaxy Nexus CDMA using Xparent ICS Blue Tapatalk 2

Epix4G said:
But seriously I hope you learned your lesson and will read and hope you get your phone fixed or replaced
Sent from my Sprint Galaxy Nexus CDMA using Xparent ICS Blue Tapatalk 2
Click to expand...
Click to collapse
Hopefully this fail helps us all back from a potential brick. We live, flash and learn.
Sent from my SPH-D700 using xda premium

New phone on the way!
I was able to get a replacement sent from Sprint. Had to go to a corporate store and have a tech look at the phone and they agreed it was toast...
Luckily they didn't know it was due to my failed attempt to load an unsupported ROM.
Lesson learned... new phone should be in by the end of the week.
I'll be waiting for a supported ROM this time.

alexanderd said:
I was able to get a replacement sent from Sprint. Had to go to a corporate store and have a tech look at the phone and they agreed it was toast...
Luckily they didn't know it was due to my failed attempt to load an unsupported ROM.
Lesson learned... new phone should be in by the end of the week.
I'll be waiting for a supported ROM this time.
Click to expand...
Click to collapse
No wonder our insurance deductibles keep going up...

bizdady said:
No wonder our insurance deductibles keep going up...
Click to expand...
Click to collapse
+1
Still sucks for op
Sent from my SPH-L710 using Tapatalk 2

matrixzone5 said:
Honestly I was waiting for this to happen gid luck restoring it phone
Sent from my SPH-L710 using XDA
Click to expand...
Click to collapse
Oh man tell me about it, I almost stupidly went on to the CM9 nightlies and downloaded the I9300 version before I thought to myself, "well wait a minute, that's not my model number!"
Duh, shoulda had a V8.

I didnt install a GSM rom but still managed to brick somehow. Didnt touch any system files or do anything to where i should be bricked either. Any idea when a full stock Odin package will be made? My phone has been bricked for almost 2 days now
Edit: i started a tread here a few days ago -> http://forum.xda-developers.com/showthread.php?t=1731416 if anyone cares to look or has any advice for me
Thanks

pizzlewizzle said:
I didnt install a GSM rom but still managed to brick somehow. Didnt touch any system files or do anything to where i should be bricked either. Any idea when a full stock Odin package will be made? My phone has been bricked for almost 2 days now
Edit: i started a tread here a few days ago -> http://forum.xda-developers.com/showthread.php?t=1731416 if anyone cares to look or has any advice for me
Thanks
Click to expand...
Click to collapse
What have you tried so far? Have you tried reflashing cwm recovery in Odin?

I did the same thing that the OP said, flashed that omega rom and now my phone wont turn on either.
I was going to try the jig method

taygutta said:
I did the same thing that the OP said, flashed that omega rom and now my phone wont turn on either.
I was going to try the jig method
Click to expand...
Click to collapse
Have you tried mskip's fix??
http://forum.xda-developers.com/showthread.php?t=1727171

bizdady said:
Have you tried mskip's fix??
http://forum.xda-developers.com/showthread.php?t=1727171
Click to expand...
Click to collapse
I want to do this but I somehow need to get the phone on. The buttons dont work.

Any luck?
My phone got stuck booting, so I tried to install the omega rom. The install worked well, and I clicked "reboot." Now the phone won't turn on. I can't get to ODIN or recovery anymore.
Did you guys find any fixes?

brickeds3 said:
My phone got stuck booting, so I tried to install the omega rom. The install worked well, and I clicked "reboot." Now the phone won't turn on. I can't get to ODIN or recovery anymore.
Did you guys find any fixes?
Click to expand...
Click to collapse
What happened is that you flashed a rom that was meant for the international version of the S3 and your on the US version. The only fix I have found is to send it to mobiletechvideos.com. I did and they say they can fix it and maybe save my data I have on it ( I just sent it in)
My fingers are crossed for the data recovery but as far as the phone I am going to send it for a exchange anyway.

Welp, I'm sad to say I just did the same thing too. Should have read. I'm a stinkin noob at this. I installed the I9300 version on a US version phone. Has there been any more development on this? Is the hardware fried, or is there a fix through that mobiletechvideos.com that was mentioned? What was the outcome of that, Taygutta, if you don't mind me re-bringing back up a potentially painful topic?? This thread made me a little sick, since it's my brother's new phone (someone else that knew what they were doing rooted it for him but he didn't like the rom, so I thought I would help him find a few other options to try flashing.)
Anyway, any confirmation that I'm buying my brother a new phone (so I can emotionally prepare for the purchase) or are there some other options?

There's one more thing you can try. There's a little device called a USB Jig. It was made for SGS-2 to clear the yellow triangle and reset flash counts in ODIN mode. It also puts your phone in ODIN mode by simply plugging it into the USB port of a powered down phone. Once in ODIN mode, you can reflash a stock ROM, recovery, etc. You can buy these for around $20 or less on the web.
If this does not work, I'm afraid nothing will.
Good luck.

6uPMAH said:
There's one more thing you can try. There's a little device called a USB Jig. It was made for SGS-2 to clear the yellow triangle and reset flash counts in ODIN mode. It also puts your phone in ODIN mode by simply plugging it into the USB port of a powered down phone. Once in ODIN mode, you can reflash a stock ROM, recovery, etc. You can buy these for around $20 or less on the web.
If this does not work, I'm afraid nothing will.
Good luck.
Click to expand...
Click to collapse
Somewhere in the thread an answer exists. You are not the first to do this.
I think the jig is the best way.
Sent from my SPH-L710 using Tapatalk 2

[Q]What went wrong with my Liquid Smooth ROM?

OK ofcourse as all noobs do when they start a noob thread they state that they are a noob... Well I am a noob. and I need help as we noobs tend to ask for. I Apologize but I have done a fair share of reading and before I go of and destroy the phone further I wanted to give my own thread a try.
ok...
So I got this ATT GS3 everything was cool from the store but I wanted to reverse Apps (I Tinker with code here and there). Which would require a simple root. Great... Followed the Simple self explanatory TUT "How to root your phone without tripping the flash Counter". Started doing my thing blah,blah,blah. should have been satisfied. (Here is where the Noob Kicks In). Saw how sick the liquid smooth rom was. loved the look was just tired of stock. so I did it. flashed the rom (No Backup whatsoever just exported contact list :crying At a first glance I was in love still doing my thing.... then I started noticing the glitches (mainly video related). got a newborn and could never just bust out the camera and play proud daddy. So I decided to go back. this is where the big problem Happened. My PC doesn't recognize the Phone via USB(I've tried 4 other computers). Ive read atleast 10 threads and they all say I should go in the dialer but no one has a custom ROM. So Now I cant even debug apps on my phone. I don't know what to do?
From 4.1.2 to Liquid Smooth 4.2.2
Please Help
Sorry if that seems long.

Flash a different rom via recovery.
Sent from my SGH-I747 using Tapatalk 4 Beta

Domoo said:
Flash a different rom via recovery.
Sent from my SGH-I747 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Thank you for the speedy reply can u give me any suggestions. I would like to go back to just the plain Rooted stock Image. also CWM does not work on the phone

theSyth said:
Thank you for the speedy reply can u give me any suggestions. I would like to go back to just the plain Rooted stock Image. also CWM does not work on the phone
Click to expand...
Click to collapse
'm not an expert but it sounds to me like you will need to use odin as described in this thread.
http://forum.xda-developers.com/showthread.php?t=1739426
Hope that helps

Abbyjack said:
'm not an expert but it sounds to me like you will need to use odin as described in this thread.
http://forum.xda-developers.com/showthread.php?t=1739426
Hope that helps
Click to expand...
Click to collapse
Yes Using Odin would be a dream but my PC does not recognize the phone.... so IM stuck. there is a ODIN App now does anyone think I should give that a try?. Like I sed I just don't want to make things worst. all suggestions would be helpful

Do you have android debugging checked under developer settings? If no, try that. Had that problem awhile back and that cleared it. Also, have you tried using another USB cable to connect to your computer? Also have run into problems connecting to the computer because of that. Mobile Odin might be your only option if you can get it on your phone. Just search and read carefully.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

ryankgrant said:
Do you have android debugging checked under developer settings? If no, try that. Had that problem awhile back and that cleared it. Also, have you tried using another USB cable to connect to your computer? Also have run into problems connecting to the computer because of that. Mobile Odin might be your only option if you can get it on your phone. Just search and read carefully.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Yea ive done all that debugging stuff. I'm just gonna do the mobile ODIN.Downloading it now. Wish me luck

Good luck buddy, haha.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

122 omiinfo
ok so I used mobile odin to flash the stock image back on the phone... For Future reference After you flash stock image you go back into the phone in recovery mode and wipe all data (Cache,Dalvic, Factory Reset) I had a crazy issue that side tracked me for about 45 minutes. I got a Flashing Samsung Logo. just put it like this I was already on craigslist looking for another phone. anyway USB debugging still doesn't work but. atleast im back to stock incase I gotta deal with Samsung or AT&T I can prolly slide through

Weird.
When you connect your phone to your computer does it charge? Ive had this problem recently and the phone would charge while connected to the computer, I just couldn't use mass storage. Buying a new cable fixed it though. I'm at a loss.
Maybe now you're on stock try the dialer commands you mentioned in the O.P.. If you haven't already.
Anyway, good luck. if you figure it you should post what you did.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app